RÉSUMÉ
Purpose: Use of mechanical imaging (MI) as complementary to digital mammography (DM), or in simultaneous digital breast tomosynthesis (DBT) and MI - DBTMI, has demonstrated the potential to increase the specificity of breast cancer screening and reduce unnecessary biopsies compared with DM. The aim of this study is to investigate the increase in the radiation dose due to the presence of an MI sensor during simultaneous image acquisition when automatic exposure control is used. Approach: A radiation dose study was conducted on clinically available breast imaging systems with and without an MI sensor present. Our estimations were based on three approaches. In the first approach, exposure values were compared in paired clinical DBT and DBTMI acquisitions in 97 women. In the second approach polymethyl methacrylate (PMMA) phantoms of various thicknesses were used, and the average glandular dose (AGD) values were compared. Finally, a rectangular PMMA phantom with a 45 mm thickness was used, and the AGD values were estimated based on air kerma measurements with an electronic dosemeter. Results: The relative increase in exposure estimated from digital imaging and communications in medicine headers when using an MI sensor in clinical DBTMI was 11.9 % ± 10.4 . For the phantom measurements of various thicknesses of PMMA, the relative increases in the AGD for DM and DBT measurements were, on average, 10.7 % ± 3.1 and 11.4 % ± 3.0 , respectively. The relative increase in the AGD using the electronic dosemeter was 11.2 % ± < 0.001 in DM and 12.2 % ± < 0.001 in DBT. The average difference in dose between the methods was 11.5 % ± 3.3 . Conclusions: Our measurements suggest that the use of simultaneous breast radiography and MI increases the AGD by an average of 11.5 % ± 3.3 . The increase in dose is within the acceptable values for mammography screening recommended by European guidelines.
RÉSUMÉ
Accurate measurement of the size of lesions or distances between any two points during endoscopic examination of the gastrointestinal tract is difficult owing to the fisheye lens used in endoscopy. To overcome this issue, we developed a phase-shift method to measure three-dimensional (3D) data on a curved surface, which we present herein. Our system allows the creation of 3D shapes on a curved surface by the phase-shift method using a stripe pattern projected from a small projecting device to an object. For evaluation, 88 measurement points were inserted in porcine stomach tissue, attached to a half-pipe jig, with an inner radius of 21 mm. The accuracy and precision of the measurement data for our shape measurement system were compared with the data obtained using an Olympus STM6 measurement microscope. The accuracy of the path length of a simulated protruded lesion was evaluated using a plaster model of the curved stomach and graph paper. The difference in height measures between the measurement microscope and measurement system data was 0.24 mm for the 88 measurement points on the curved surface of the porcine stomach. The error in the path length measurement for a lesion on an underlying curved surface was <1% for a 10-mm lesion. The software was developed for the automated calculation of the major and minor diameters of each lesion. The accuracy of our measurement system could improve the accuracy of determining the size of lesions, whether protruded or depressed, regardless of the curvature of the underlying surface.
RÉSUMÉ
Background: Neck circumference (NC) measurement has been recently developed as a simple and time-saving anthropometric method for predicting cardiovascular risk. Asymptomatic hyperuricemia is known as one of the cardiovascular risk factors. This study investigated the association between NC and asymptomatic hyperuricemia among the general population of Korea. Methods: This cross-sectional study examined data from 7,629 participants in the 2019-2020 Korea National Health and Nutrition Examination Survey. Multivariable logistic regression analysis was used to identify the factors associated with hyperuricemia. Results: Approximately 10% of participants corresponded to hyperuricemia group who were likely to be male, have more comorbidities, poorer habits, and larger NC. Multivariable regression analysis revealed that NC was significantly associated with hyperuricemia in women (OR 1.17; 95% CI 1.06-1.30), but not in men (OR 1.04; 95% CI 0.96-1.12). Conclusion: A large NC is independently correlated with hyperuricemia among Korean women.
RÉSUMÉ
Knee sleeves are commonly used to address knee-related concerns, particularly in older individuals. Although previous studies have demonstrated their efficacy in improving gait and functional outcomes in knees with pathological conditions, the effectiveness of knee sleeves for improving gait characteristics in healthy older adults remains unclear. The harmonic ratio (HR), an index for assessing gait symmetry commonly used to discriminate between individuals with different functional levels, can be used to detect alterations in gait characteristics. This study investigated the effects of knee sleeves on gait symmetry in healthy older adults. Sixteen healthy community-dwelling older adults walked barefoot with and without knee sleeves at normal and fast speeds. Gait symmetry indices (HR and improved HR [iHR]) and spatiotemporal gait parameters were compared under different conditions. A significant interaction between knee condition and walking speed was observed for mean iHR in the anteroposterior direction (p = 0.006). A significant simple main effect of knee condition was found during fast walking, with a larger iHR with knee sleeves than without (p = 0.002). In the condition without knee sleeves, the iHR was significantly lower during fast walking than during normal walking (p = 0.035). Furthermore, a significant main effect of knee condition was observed for the variability of iHR in the anteroposterior direction, with a smaller variability when walking with knee sleeves than when walking without (p = 0.006). These results suggest that knee sleeves may enhance gait symmetry along the anteroposterior direction, particularly during fast walking, where symmetry disruption is more likely than walking at a comfortable pace. A significant reduction in gait symmetry variability also suggests a stabilizing effect on gait dynamics. These findings provide the first evidence supporting the efficacy of knee sleeves for improving gait symmetry. The use of knee sleeves could be a valuable option for restoring disrupted gait symmetry during fast walking, with potential implications for reducing the risk of falls.
RÉSUMÉ
Diphenhydramine is a first-generation antihistamine medication. Acute intoxication with diphenhydramine can be severe and potentially fatal. The current case is of a 13-year-old girl who presented with central nervous system depression after voluntary intake of unknown drugs. Serum concentration analysis showed diphenhydramine intoxication, blood half-life extension, and a false positive result for tricyclic antidepressants (TCAs) in urine examination. To our knowledge, this is the first reported case of confirmed diphenhydramine overdose with a false positive result for TCAs and measurement of the serum level in a child. Considering the similarities between the clinical symptoms of diphenhydramine and TCA intoxication, this case illustrates that all physicians should consider the possibility of cross-reactivity during the diagnosis of patients with unknown acute drug intoxication who test positive for TCAs.
RÉSUMÉ
A novel fixation system for a hand-held dynamometer (HHD) was designed to enable isometric muscle measurements on various muscle groups of strong, healthy individuals in a field setting. The objective of this study was to evaluate the intra- and interrater reliability of the system and determine its suitability for use by multiple researchers within large-scale data collections during field activities. Four researchers tested eight healthy subjects, who each completed eight different maximal isometric muscle strength assessments using the HHD fixation system. Intraclass correlation coefficients (ICC) results were evaluated with a 95% confidence interval. ICC results for interrater reliability demonstrated excellent agreement of all eight measurements tested. ICC results for intrarater reliability demonstrated excellent agreement for six out of eight measurements. This system provides a new opportunity for several different high-quality maximal muscle strength measurements to be collected by multiple data collectors on large numbers of strong, healthy individuals in a field setting.
RÉSUMÉ
Craving is considered one of the defining characteristics for alcohol or substance use disorders. There is no consensus on the underlying processes of craving, although multiple models exist. Craving is a very individualistic symptom and has to be self-reported. Several instruments have been developed to measure craving, without a recognized gold standard. The patient's perspective appears critical to determine the relevance of the numerous existing tools. We assessed the contribution of patients to the development of these instruments. We performed a systematic review of instruments measuring alcohol craving published from 2012 to 2023 from three databases (PubMed, PsycInfo, and Embase) in addition to those identified in a previous review by Kavanagh et al. from 1990 to 2012. We included all articles related to the development or validation of instruments for the assessment of alcohol craving. We identified and included in this review the corresponding instruments. Articles translating existing instruments without validation or on single-item instruments were excluded. We analyzed the articles in accordance with COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN) recommendations to assess patient involvement in the creation of patient-reported outcome measures (PROM). Two key aspects were investigated: (1) the general design, encompassing the quality of construct description, identification of elements pertinent to a PROM, particularly the inclusion of concepts provided by patients, and (2) the quality of cognitive interviews (when conducted), to evaluate the comprehensiveness and comprehensibility of the PROM. We included 22 articles identifying 16 instruments for measuring alcohol craving. Patients only contributed to item development for one instrument and its short version (QAU and AUQ). None of the instruments met all of the developmental quality criteria, with 14 classed as "inadequate" and two as "doubtful." The current instruments measuring alcohol craving were developed with poor patient contribution, although most articles did not adequately report patient involvement. Patients' perspectives on craving should be explored for future patient-centered approach.
RÉSUMÉ
Domestic violence (DV) is a significant concern within China. Currently, there are few standardized measurement tools to gauge Chinese stakeholders' perceptions and beliefs concerning DV. This research sought to validate tools to be used with such stakeholders. Factor analyses were utilized on cross-sectional, survey data from a purposive sample of 683 Chinese DV professionals working in four institutions in Guangdong. Analyses developed three scales for measuring DV Definitions, DV Attitudes, and DV Policing. The development of these scales is beneficial to advance the already growing research related to DV in China in ways that are relevant to the Chinese context.
RÉSUMÉ
In the U.S., inequities by race/ethnicity in health outcomes, such as in the HIV epidemic, are long standing but have come to the forefront during the COVID-19 pandemic. There is growing recognition of the role of structural racism in racialized health inequities, yet the conceptualization and operationalization of structural racism in HIV research lags. We conducted a scoping review of existing published literature, between 1999-April 2024, conceptualizing and measuring structural racism's impact among people living with or at risk for HIV in the U.S. Our initial search yielded 236 unique articles, which after title and abstract screening yielded ten articles meeting full text review criteria. We then extracted key parameters, such as conceptualization, method of measurement of structural racism, study aims, design, and findings. Three of the articles were qualitative studies that conceptualized structural racism using (1) the social network model, (2) individual and structural intersectionality and (3) critical race theory. Operationalization of structural racism within the seven quantitative studies fell into three categories: (1) structural level, (2) a scale of experiences of racism, including structural racism, and (3) using explanatory demographic factors as downstream measures of the effects of structural racism. The variance in the conceptualization and operationalization of structural racism highlights the different interpretations of structural racism in its applications to the field of HIV research. Given the vast racial/ethnic inequities in HIV, we propose three overarching suggestions for next steps in improving the conduct of research on structural racism in HIV: (1) we must prioritize measuring racism past the individual and interpersonal levels to consider systemic factors at a societal level that manifest as structural racism to improve HIV outcomes in the U.S., (2) consider intergenerational effects of structural racism through the use of longitudinal data, and (3) broaden the agenda of structural racism to incorporate other systems of oppression. Additionally, broadening the scope of funding and inclusion of more researchers and individuals with lived experiences to support structural racism research to drive the scientific agenda and design of structural-level interventions will not only bolster achieving the U.S. Ending the HIV Epidemic goals but will do so by addressing inequities.
RÉSUMÉ
OBJECTIVE: Objectives of this study were to confirm the Berg Balance Scale's (BBS) measurement properties and unidimensionality with an item response theory analysis in persons with subacute and chronic stroke and examine the precision and efficiency of computerized adaptive testing (CAT). METHODS: Data were obtained from 519 ambulatory persons with subacute and chronic stroke in 2 retrospective databases. A principal component analysis (PCA) of residuals was used to evaluate unidimensionality. BBS fit to a rating scale model versus a partial credit model was examined and item parameters were generated for CAT calibration. Person measures from all 14 items were defined as actual balance ability. BBS CAT simulations were used to examine changes in measurement precision with increasing number of items administered and a precision-based stopping rule (0.5 logit standard error (SE) threshold). RESULTS: A PCA of residuals supports the BBS's unidimensionality and Rasch analysis supports using the rating scale model for measurement. Maximum precision for BBS CAT was SE = 0.40 logits when administering all items. BBS CAT estimated balance ability was highly correlated with actual ability when 4 or more items were administered (r > 0.9). Precision was within 0.5 logits when 5 or more items were administered (SE < 0.48 logits). BBS CAT estimated balance ability was highly correlated with actual ability (r = 0.952) using a precision-based stopping rule. The average number of items administered with the precision-based stopping rule was 5.43. CONCLUSION: The BBS is sufficiently unidimensional and the rating scale model can be used for measurement. BBS CAT is efficient and replicates the full instrument's reliability when measuring balance ability in ambulatory persons with subacute and chronic stroke. Future work should aim to enhance the interpretability of measures to facilitate clinical decision making. IMPACT STATEMENT: BBS CAT provides an efficient way of measuring balance ability for individuals in stroke rehabilitation giving clinicians more time with patients.
RÉSUMÉ
Since the 1970s, artificial intelligence (AI) has played an increasingly pivotal role in the medical field, enhancing the efficiency of disease diagnosis and treatment. Amidst an aging population and the proliferation of chronic disease, the prevalence of complex surgeries for high-risk multimorbid patients and hard-to-heal wounds has escalated. Healthcare professionals face the challenge of delivering safe and effective care to all patients concurrently. Inadequate management of skin wounds exacerbates the risk of infection and complications, which can obstruct the healing process and diminish patients' quality of life. AI shows substantial promise in revolutionizing wound care and management, thus enhancing the treatment of hospitalized patients and enabling healthcare workers to allocate their time more effectively. This review details the advancements in applying AI for skin wound assessment and the prediction of healing timelines. It emphasizes the use of diverse algorithms to automate and streamline the measurement, classification, and identification of chronic wound healing stages, and to predict wound healing times. Moreover, the review addresses existing limitations and explores future directions.
RÉSUMÉ
AIM: This study observed changes in respiratory rate measurement (RRM) and identified barriers and challenges in clinical practice that influence healthcare worker behaviour, aiming to improve RRM in a hospital setting. DESIGN: An observational study was conducted. METHODS: We observed and analysed changes in the behaviour of healthcare workers at a hospital where multi-nudges were introduced to improve RRM. RESULTS: We checked respiration rate using electronic data and discovered that the original measurement rates were low. Measurement rates rapidly increased after posters were added. Barriers such as time constraints and measurement equipment were also noted. CONCLUSION: RRM was found to be effective in promoting behavioural economics in medical settings. The results show that incorporating behavioural science principles into medical interventions has the potential to positively change behaviour. IMPLICATIONS FOR THE PROFESSION AND/OR PATIENT CARE: By increasing nurses' awareness of respiratory rate measurement and addressing barriers to it, the measurement rate of respiratory rate can also increase, leading to more accurate patient evaluations and triage. IMPACT: WHAT PROBLEM DID THE STUDY ADDRESS?: The proportion of respiratory rate measurements leading to rapid response system (RRS) calls was low. WHAT WERE THE MAIN FINDINGS?: The study observed that a multi-nudge approach effectively changes the behaviour of ward nurses, resulting in enhanced quality of medical care. WHERE AND ON WHOM WILL THE RESEARCH HAVE AN IMPACT?: This research can serve as a valuable reference for leaders promoting healthcare quality projects, by offering a method to encourage behavioural change. REPORTING METHOD: This study complied with the EQUATOR guidelines and its reporting adheres to the STROBE checklist. PATIENT OR PUBLIC CONTRIBUTION: No patient or public contribution.
RÉSUMÉ
In recent decades, there has been ongoing development in the application of computer vision (CV) in the medical field. As conventional contact-based physiological measurement techniques often restrict a patient's mobility in the clinical environment, the ability to achieve continuous, comfortable and convenient monitoring is thus a topic of interest to researchers. One type of CV application is remote imaging photoplethysmography (rPPG), which can predict vital signs using a video or image. While contactless physiological measurement techniques have an excellent application prospect, the lack of uniformity or standardization of contactless vital monitoring methods limits their application in remote healthcare/telehealth settings. Several methods have been developed to improve this limitation and solve the heterogeneity of video signals caused by movement, lighting, and equipment. The fundamental algorithms include traditional algorithms with optimization and developing deep learning (DL) algorithms. This article aims to provide an in-depth review of current Artificial Intelligence (AI) methods using CV and DL in contactless physiological measurement and a comprehensive summary of the latest development of contactless measurement techniques for skin perfusion, respiratory rate, blood oxygen saturation, heart rate, heart rate variability, and blood pressure.
RÉSUMÉ
OBJECTIVES: To compare miniscrew versus bone tracing registration methods on dental implant placement accuracy and time efficiency in edentulous jaws using a dynamic computer-assisted implant surgery (d-CAIS) system. METHODS: Twelve fully edentulous maxillary models were allocated into two groups: miniscrew tracing (MST) group, where registration was performed by tracing four miniscrews; and bone tracing (BT) group, where registration was conducted by tracing maxillary bone fiducial landmarks. Six implants were placed on each model using the X-Guide® d-CAIS system. Pre- and postoperative cone-beam computed tomography (CBCT) scans were superimposed to evaluate implant placement accuracy. The time required for registration and the overall surgery time were also recorded. RESULTS: Thirty-six implants were placed in each group. The MST group showed significantly lower mean angulation deviations (mean difference (MD): -3.33°; 95% confidence interval (CI): -6.56 to -0.09); pâ¯=â¯0.044), 3D platform deviations (MD: -1.01 mm; 95%CI: -1.74 to -0.29; pâ¯=â¯0.006), 2D platform deviations (MD: -0.97 mm; 95%CI: -1.71 to -0.23; pâ¯=â¯0.010), and 3D apex deviations (MD: -1.18 mm; 95%CI: -1.92 to -0.44; pâ¯=â¯0.002) versus the BT group. The overall surgery time was similar for both groups (MD: 6.10 min.; 95%CI: -0.31 to 12.51; pâ¯=â¯0.06), though bone tracing required significantly more time compared with miniscrew registration (MD: 4.79 min.; 95%CI: 2.96 to 6.62; p < 0.05). CONCLUSIONS: Registration with MST increases the accuracy of implant placement with a d-CAIS system in edentulous jaws compared with the BT method, and slightly reduces the overall surgery time. CLINICAL SIGNIFICANCE: Miniscrew tracing registration improves implant placement accuracy in comparison with bone tracing registration.
RÉSUMÉ
PURPOSE: To research the accuracy of intraocular lens (IOL) calculation formulas and investigate the effect of anterior chamber depth (ACD) and lens thickness (LT) measured by swept-source optical coherence tomography biometer (IOLMaster 700) in patients with posterior chamber phakic IOL (PC-pIOL). METHODS: Retrospective case series. The IOLMaster 700 biometer was used to measure axial length (AL) and anterior segment parameters. The traditional formulas (SRK/T, Holladay 1 and Haigis) with or without Wang-Koch (WK) AL adjustment, and new-generation formulas (Barret Universal II [BUII], Emmetropia Verifying Optical [EVO] v2.0, Kane, Pearl-DGS) were utilized in IOL power calculation. RESULTS: This study enrolled 24 eyes of 24 patients undergoing combined PC-pIOL removal and cataract surgery at Xiamen Eye Center of Xiamen University, Xiamen, Fujian, China. The median absolute prediction error in ascending order was EVO 2.0 (0.33), Kane (0.35), SRK/T-WKmodified (0.42), Holladay 1-WKmodified (0.44), Haigis-WKC1 (0.46), Pearl-DGS (0.47), BUII (0.58), Haigis (0.75), SRK/T (0.79), and Holladay 1 (1.32). The root-mean-square absolute error in ascending order was Haigis-WKC1 (0.591), Holladay 1-WKmodified (0.622), SRK/T-WKmodified (0.623), EVO (0.673), Kane (0.678), Pearl-DGS (0.753), BUII (0.863), Haigis (1.061), SRK/T (1.188), and Holladay 1 (1.513). A detailed analysis of ACD and LT measurement error revealed negligible impact on refractive outcomes in BUII and EVO 2.0 when these parameters were incorporated or omitted in the formula calculation. CONCLUSION: The Kane, EVO 2.0, and traditional formulas with WK AL adjustment displayed high prediction accuracy. Furthermore, the ACD and LT measurement error does not exert a significant influence on the accuracy of IOL power calculation formulas in highly myopic eyes implanted with PC-pIOL.
Sujet(s)
Biométrie , Cataracte , Lentilles intraoculaires phaques , Réfraction oculaire , Tomographie par cohérence optique , Humains , Études rétrospectives , Tomographie par cohérence optique/méthodes , Femelle , Mâle , Adulte d'âge moyen , Biométrie/méthodes , Réfraction oculaire/physiologie , Cataracte/complications , Adulte , Optique et photonique , Reproductibilité des résultats , Sujet âgé , Longueur axiale de l'oeil/imagerie diagnostique , Longueur axiale de l'oeil/anatomopathologie , Chambre antérieure du bulbe oculaire/imagerie diagnostique , Acuité visuelle/physiologie , Pose d'implant intraoculaire/méthodesRÉSUMÉ
The current study presents the development process and initial validation of the Engagement in Athletic Training Scale (EATS), which was designed to evaluate athletes' engagement in athletic training. In study 1, item generation and initial content validity of the EATS were achieved. In study 2, the factor structure of the EATS was examined using exploratory factor analysis (EFA) and exploratory structural equation modeling (ESEM). Internal consistency reliabilities of the subscales were examined (N = 460). In study 3, factor structure, discriminant validity, internal consistency reliability, and nomological validity of the EATS were further examined in an independent sample (N = 513). Meanwhile, measurement invariance of the EATS across samples (study 2 and study 3) and genders was evaluated. Overall, results from the 3 rigorous studies provided initial psychometric evidence for the 19-item EATS and suggested that the EATS could be used as a valid and reliable measure to evaluate athletes' engagement in athletic training.
RÉSUMÉ
BACKGROUND: Spastic pelvic floor syndrome (SPFS) is a refractory pelvic floor disease characterized by abnormal (uncoordinated) contractions of the external anal sphincter and puborectalis muscle during defecation, resulting in rectal emptation and obstructive constipation. The clinical manifestations of SPFS are mainly characterized by difficult defecation, often accompanied by a sense of anal blockage and drooping. Manual defecation is usually needed during defecation. From physical examination, it is commonly observed that the patient's anal muscle tension is high, and it is difficult or even impossible to enter with his fingers. AIM: To investigate the characteristics of anorectal pressure and botulinum toxin A injection combined with biofeedback in treating pelvic floor muscle spasm syndrome. METHODS: Retrospective analysis of 50 patients diagnosed with pelvic floor spasm syndrome. All patients underwent pelvic floor surface electromyography assessment, anorectal dynamics examination, botulinum toxin type A injection 100 U intramuscular injection, and two cycles of biofeedback therapy. RESULTS: After the botulinum toxin A injection combined with two cycles of biofeedback therapy, the patient's postoperative resting and systolic blood pressure were significantly lower than before surgery (P < 0.05). Moreover, the electromyography index of the patients in the resting stage and post-resting stages was significantly lower than before surgery (P < 0.05). CONCLUSION: Botulinum toxin A injection combined with biofeedback can significantly reduce pelvic floor muscle tension in treating pelvic floor muscle spasm syndrome. Anorectal manometry is an effective method to evaluate the efficacy of treatment objectively. However, randomized controlled trials are needed.
RÉSUMÉ
Purpose: To investigate the available evidence on the accuracy of conventional and digital workflows for complete arch implant supported frameworks. Materials and methods: This scoping review was conducted according to the 5-stage framework of Arksey and O'Malley. A systematic literature search was performed adhering to the PRISMA guidelines to identify studies with a direct comparison of conventional and digital methods for the fabrication of complete arch implant supported frameworks. 58 in-vitro studies with the focus on edentulous arches with at least four implants published between 2000 and 2024 were included. The reported outcomes were examined to determine the value of a statistical analysis for adding up the individual errors to a cumulative error of the workflow. Results: Evidence on the accuracy assessment of digital and conventional workflows for complete arch implant supported frameworks is available. However, also studies with the same assessment methods and outcome units appear to be too heterogeneous to perform a statistical analysis of error accumulation. While there is no consensus in the impression and cast fabrication stage, digital techniques show a superior accuracy for the fabrication of complete arch implant supported frameworks compared to conventional casting. Conclusion: In-vitro studies assessing the accuracy of entire workflows and classifying their outcomes regarding the clinical relevance are lacking.
RÉSUMÉ
PURPOSE: Immersive simulation is an innovative training approach in health education that enhances student learning. This study examined its impact on engagement, motivation, and academic performance in nursing and midwifery students. METHODS: A comprehensive systematic search was meticulously conducted in 4 reputable databases-Scopus, PubMed, Web of Science, and Science Direct-following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. The research protocol was pre-registered in the PROSPERO registry, ensuring transparency and rigor. The quality of the included studies was assessed using the Medical Education Research Study Quality Instrument. RESULTS: Out of 90 identified studies, 11 were included in the present review, involving 1,090 participants. Four out of 5 studies observed high post-test engagement scores in the intervention groups. Additionally, 5 out of 6 studies that evaluated motivation found higher post-test motivational scores in the intervention groups than in control groups using traditional approaches. Furthermore, among the 8 out of 11 studies that evaluated academic performance during immersive simulation training, 5 reported significant differences (P<0.001) in favor of the students in the intervention groups. CONCLUSION: Immersive simulation, as demonstrated by this study, has a significant potential to enhance student engagement, motivation, and academic performance, surpassing traditional teaching methods. This potential underscores the urgent need for future research in various contexts to better integrate this innovative educational approach into nursing and midwifery education curricula, inspiring hope for improved teaching methods.