Nanolignin-Facilitated Robust Hydrogels.

Recently, certain challenges and accompanying drawbacks have emerged in the preparation of high-strength and tough polymer hydrogels. Insights from wood science highlight the role of the intertwined molecular structure of lignin and crystalline cellulose in contributing to wood's strength. Herein, we immersed prestretched poly(vinyl alcohol) (PVA) polymer hydrogels into a solution of nanosized lignosulfonate sodium (LS), a water-soluble anionic polyelectrolyte, to creatively reconstruct this similar structure at the molecular scale in hydrogels. The nanosized LS effectively fixed and bundled the prestretched PVA polymers while inducing the formation of dense crystalline domains within the polymer matrix. Consequently, the interwoven structure of crystalline PVA and LS conferred good strength to the composite hydrogels, exhibiting a tensile strength of up to ∼23 MPa, a fracture strain of ∼350%, Young's modulus of ∼17 MPa, toughness of ∼47 MJ/m3, and fracture energy of ∼42 kJ/m2. This hydrogel far outperformed previous hydrogels composed directly of lignin and PVA (tensile strength <1.5 MPa). Additionally, the composite hydrogels demonstrated excellent antifreezing properties (<-80 °C). Notably, the LS-assisted reconstruction technology offers opportunities for the secondary fixation of PVA hydrogel shapes and high-strength welding of hydrogel components. This work introduces an approach for the high-value utilization of LS, a green byproduct of pulp production. LS's profound biomimetic strategy will be applied in multifunctional hydrogel fields.

Integrating molecular-caged nano-hydroxyapatite into post-crosslinked PVA nanofibers for artificial periosteum.

Artificial periosteum is deemed a novel strategy for inducing endogenous bone regeneration, but ideal periosteum substitutes achieved by orchestrating a biomimetic microenvironment for bone regeneration remain a significant challenge. Here, we design and fabricate a hybridized nanofiber-based artificial periosteum with boosted osteoinduction properties. Via a "molecular cage" biomineralization strategy, nano-hydroxyapatite (nano-HAp) with a controllable size (∼22 nm) and excellent dispersion serves as unique nano-additives for water-soluble polyvinyl-alcohol (PVA)-based artificial periosteum. The PVA/HAp composite is electrospun into nanofibers to replicate the extracellular-matrix-inspired nanostructure for inducing cell adhesion, proliferation, and fate manipulation. A simple post-crosslinking treatment is subsequently applied to further booster its mechanical strength (6.6 MPa) and swelling stability. The optimized sample of C-PVA/HAp (10 wt% nano-HAp) artificial periosteum features excellent biocompatibility and remarkable in vitro mineralization. Cell experiments demonstrate that its effectively boasted cell modulation for enhanced osteogenesis without the aid of growth factors, showing a possible activation of the ERK/MAPK signaling pathway. This work provides an effective strategy for designing novel HAp nano-additives and expands the possibility of biomimetic fabrication for more advanced nanofiber-based artificial periosteum.

High-Strength, Antiswelling Directional Layered PVA/MXene Hydrogel for Wearable Devices and Underwater Sensing.

Hydrogel sensors are widely utilized in soft robotics and tissue engineering due to their excellent mechanical properties and biocompatibility. However, in high-water environments, traditional hydrogels can experience significant swelling, leading to decreased mechanical and electrical performance, potentially losing shape, and sensing capabilities. This study addresses these challenges by leveraging the Hofmeister effect, coupled with directional freezing and salting-out techniques, to develop a layered, high-strength, tough, and antiswelling PVA/MXene hydrogel. In particular, the salting-out process enhances the self-entanglement of PVA, resulting in an S-PM hydrogel with a tensile strength of up to 2.87 MPa. Furthermore, the S-PM hydrogel retains its structure and strength after 7 d of swelling, with only a 6% change in resistance. Importantly, its sensing performance is improved postswelling, a capability rarely achievable in traditional hydrogels. Moreover, the S-PM hydrogel demonstrates faster response times and more stable resistance change rates in underwater tests, making it crucial for long-term continuous monitoring in challenging aquatic environments, ensuring sustained operation and monitoring.

Asymmetric Hydrogel Electrolyte Featuring a Customized Anode and Cathode Interfacial Chemistry for Advanced Zn-I2 Batteries.

An integrated asymmetric hydrogel electrolyte with a tailored composition and chemical structure on the cathode/anode-electrolyte interface is designed to boost the cost-effective, high-energy Zn-I2 battery. Such a configuration concurrently addresses the parasitic reactions on the Zn anode side and the polyiodide shuttle issue afflicting the cathode. Specifically, the Zn2+-cross-linked sodium alginate and carrageenan dual network (Carra-Zn-Alg) is adopted to guide the Zn2+ transport, achieving a dendrite-free morphology on the Zn surface and ensuring long-term stability. For the cathode side, the poly(vinyl alcohol)-strengthened poly(3,4-ethylenedioxythiophene)polystyrenesulfonate hydrogel (PVA-PEDOT) with high conductivity is employed to trap polyiodide and accelerate electron transfer for mitigating the shuttle effect and facilitating I2/I- redox kinetics. Attributing to the asymmetrical architecture with a customized interfacial chemistry, the optimized Zn-I2 cell exhibits a superior Coulombic efficiency of 99.84% with a negligible capacity degradation at 0.1 A g-1 and an enhanced stability of 10 000 cycles at 5 A g-1. The proposed asymmetric hydrogel provides a promising route to simultaneously resolve the distinct challenges encountered by the cathode and anode interfaces in rechargeable batteries.

Highly selective and visual detection of vanillin based on fluorescence Cd-MOF sensor in milk powders.

Vanillin is a commonly used synthetic flavoring agent in daily life. However, excessive intake of vanillin may pose risks to human health. Therefore, there is an urgent need for rapid and sensitive detection methods for vanillin. In this study, we developed a fluorescent sensor based on Cd-MOF for the sensitive and selective recognition of vanillin. The presence of vanillin leads to significant fluorescence quenching of Cd-MOF due to competitive absorption and photoinduced electron transfer (PET). The limit of detection was determined to be 39.6 nM, which is the lowest-among the reported fluorescent probes. The sensor was successfully applied for the detection of vanillin in real samples such as powdered milk and milk, with a recovery rate ranging from 96.88 % to 104.83 %. Furthermore, by immobilizing the Cd-MOF probe into a polyvinyl alcohol (PVA) film, we achieved a portable and visual detection composite materials for vanillin.

A Comparative Study on the Management of Acute Otitis Externa Using Hydroxylated Polyvinyl Acetate Ichthammol Glycerine Wick Versus Cotton Ichthammol Glycerine Wick.

INTRODUCTION:  Acute otitis externa is a localized inflammation of the skin of the external auditory meatus. It is characterized by pain, edema, erythema, and itchy discomfort. Treatment includes topical and oral antibiotics, analgesics, steroids, and anti-inflammatory medication for the ear. Aural medicated wicks are used to reduce edema and pain. AIM: To compare the clinical outcome of hydroxylated polyvinyl acetate ichthammol glycerine wick versus cotton ichthammol glycerine wick used in the treatment of acute otitis externa. MATERIALS AND METHODS: It is a six-month observational study with 120 patients. The patients in this study were grouped into two groups with hydroxylated polyvinyl acetate and cotton wick, respectively. Pain was assessed using the VAS score before and after three days of treatment of acute otitis externa. RESULT: Group B (patient treated with cotton ichthammol glycerine wick) had significant improvement in the pain score on days 2 and 3 compared to group A, with a significant p-value of <0.001. CONCLUSION:  During the second visit (on day 2), the cotton ear wick was significantly better in terms of otalgia when compared with the hydroxylated polyvinyl acetate. The cotton wick group showed better and faster recovery in terms of pain and edema compared to the polyvinyl alcohol (PVA) groups.

Highly selective and sensitive colorimetric chemosensor using PVA/chitosan ion-imprinted nanofibers for copper ion detection and removal.

Herein, a highly efficient colorimetric chemosensor incorporating ion-imprinted electrospun nanofiber was developed for the removal and detection of Cu2+ ions. In this regard, PVA/chitosan composites were used as the polymeric matrix, and 1-(2-pyridylazo)-2-naphthol was employed for complex formation. The prepared naked-eye sensor was characterized using Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, atomic force microscopy, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction analysis, revealing the morphological, structural, and molecular properties of the sensor. The results showed that the colorimetric chemosensor based on copper-imprinted nanofiber (Cu-INF) possesses higher selectivity for Cu2+ compared to interference ions. The selectivity coefficient (k) and relative selectivity coefficient (K') indicated the selective behavior of Cu-INF in the adsorption of Cu2+ in binary systems including Cu2+/Co2+, Cu2+/Ni2+, and Cu2+/Zn2+. Furthermore, the ion-imprinted nanofiber was used for the preconcentration of copper ions, demonstrating a high adsorption capacity of 128.205 mg g-1 for Cu2+. The equilibrium adsorption isotherm and adsorption kinetics of Cu2+ on Cu-INF followed the Freundlich adsorption isotherm and a pseudo-second-order model, respectively. The developed sensor exhibited a linear detection range of 5 × 10-8 - 2 × 10-7 M with a limit of detection (LOD) of 1.07 × 10-8 M for copper ions. The results indicated satisfactory adsorption and successful detection of Cu2+ at trace concentrations.

Facile Preparation of Irradiated Poly(vinyl alcohol)/Cellulose Nanofiber Hydrogels with Ultrahigh Mechanical Properties for Artificial Joint Cartilage.

In this study, Poly(vinyl alcohol)/cellulose nanofiber (PVA/CNF) hydrogels have been successfully prepared using γ-ray irradiation, annealing, and rehydration processes. In addition, the effects of CNF content and annealing methods on the hydrogel properties, including gel fraction, micromorphology, crystallinity, swelling behavior, and tensile and friction properties, are investigated. Consequently, the results show that at an absorbed dose of 30 kGy, the increase in CNF content increases the gel fraction, tensile strength, and elongation at break of irradiated PVA/CNF hydrogels, but decreases the water absorption. In addition, the cross-linking density of the PVA/CNF hydrogels is significantly increased at an annealing temperature of 80 °C, which leads to the transition of the cross-sectional micromorphology from porous networks to smooth planes. For the PVA/CNF hydrogel with a CNF content of 0.6%, the crystallinity increases from 19.9% to 25.8% after tensile annealing of 30% compared to the original composite hydrogel. The tensile strength is substantially increased from 65.5 kPa to 21.2 MPa, and the modulus of elasticity reaches 4.2 MPa. Furthermore, it shows an extremely low coefficient of friction (0.075), which suggests that it has the potential to be applied as a material for artificial joint cartilage.

Effect of Cooling Method on Physical and Mechanical Properties of PVA Fiber-Reinforced High-Strength Concrete Exposed to High Temperature.

High-strength concrete (HSC) boasts excellent compressive strength and durability, making it a popular choice in various engineering applications. However, under the impact of high temperatures, HSC tends to crack easily, so it is combined with polyvinyl alcohol fiber (PVA fiber) to explore its engineering application prospect. This paper investigated the physical and mechanical characteristics of HSC reinforced with PVA fibers subjected to different heating temperatures and cooling techniques. The experimental results reveal a correlation between rising temperatures and observable changes in the specimens: a progressively lighter surface hue, an augmented frequency of cracking, and a considerable escalation in the mass loss rate, particularly after the temperature exceeds 400 °C. Regarding mechanical properties, the dynamic elastic modulus and compressive and flexural strength all decrease as the heating temperature increases. As the amount of PVA fiber rises while maintaining a steady temperature, these measurements initially show an increase followed by a decrease. The fiber contents yielding the best compressive and flexural strength are 0.2% and 0.3%, in that order. Considering the influence of cooling methods, water spray cooling has a greater impact on physical and mechanical properties than natural cooling. Furthermore, SEM was employed to scrutinize the microstructure of HSC, enhancing comprehension of the alterations in its physical and mechanical characteristics. The findings of this research offer significant information regarding the high-temperature behavior of HSC, serving as a valuable resource for guiding the design, building, and upkeep of structures that incorporate HSC. Additionally, this study will aid in advancing the progress and utilization of HSC technology.

Modelling insertion behaviour of PVP (Polyvinylpyrrolidone) and PVA (Polyvinyl Alcohol) microneedles.

A comprehensive investigation into the effects of nonlinear material behaviour of polymeric (MN) and skin on the dynamics of the MN insertion in skin was undertaken in this study using experiments and numerical simulations. The nonlinearity of the material behaviour was incorporated by employing the Ramberg-Osgood and neo-Hookean equations for stress-strain relationships for the MN materials and skin, respectively. For this purpose, a characteristic type of dissolving MN array was selected. This type of MN is made by a combination of poly(vinyl alcohol) and poly(vinyl pyrrolidone). The numerical simulations were validated using experimental investigations where the MNs were fabricated using laser-engineered silicone micromould templates technology. Young's modulus, Poisson's ratio, and compression breaking force for the MN polymers were determined using a texture analyser. The alignment between experimental findings and simulation data underscores the accuracy of the parameters determined through mechanical testing and mathematical calculations for both MN materials (PVP/PVA) and skin behaviour during the MN insertion. This study has demonstrated a strong alignment between the experimental findings and computational simulations, confirming the accuracy of the established parameters for MNs and skin interactions for modelling MN insertion behaviour in skin, providing a solid foundation for future research in this area.

Formulation and investigation of differently charged ß-cyclodextrin-based meloxicam potassium containing nasal powders.

Nasal systemic drug delivery may provide an easy way to substitute parenteral or oral dosing, however, the excipients have an important role in nasal formulations to increase the permeability of the mucosa and prolong the residence time of the drug. In this work, we aimed to produce meloxicam potassium monohydrate (MXP) containing nasal powders by a nano spray drier with the use of a neutral, an anionic and a cationic ß-cyclodextrin as permeation enhancers, and (polyvinyl)alcohol (PVA) as a water soluble polymer. The following examinations were performed in order to study the effect of the applied excipients on the nasal applicability of the formulations: laser scattering, scanning electron microscope measurement, XRPD, DSC and FTIR measurements, adhesivity, in vitro drug release and permeability tests through an artificial membrane and RPMI 2650 cells. Based on our results, spherical particles were prepared with a size of 1.89-2.21 µm in which MXP was present in an amorphous state. Secondary interactions were formed between the excipients and the drug. The charged cyclodextrin-based formulations showed significantly higher adhesive force values regardless of the presence of PVA. The drug release was fast and complete. The passive diffusion of MXP was influenced not only by the charge of the cyclodextrin, but the presence of PVA, too. The permeation of the drug was enhanced in the presence of the anionic cyclodextrin testing it on RPMI 2650 cell model.

Electrophoretically deposited Asphaltum punjabianum (Shilajit) coatings on polyvinylalcohol/carboxymethylcellulose hydrogels.

The present study aims to develop Asphaltum punjabianum (namely Shilajit) coated Polyvinyl alcohol (PVA)/Carboxymethyl cellulose (CMC) hydrogels and examine their structural, morphological, degradation, and biological properties. Hydrogels were produced at two different concentrations: 70:30 PVA/CMC and 90:10 PVA/CMC. Following that, Shilajit was applied to the synthesized hydrogels using electrophoretic deposition for a duration of 3 min at 30 V. The scanning electron microscopy images showed that the hydrogel's surface had a regular distribution of irregular Shilajit particles. Fourier transform infrared spectroscopy (FTIR) analysis demonstrated the presence of hydrogen bonding between PVA and CMC hydrogels and Shilajit, indicating the successful deposition of Shilajit on the hydrogel. The hydrogels coated with Shilajit exhibited strong antimicrobial activity, resulting in an inhibition zone measuring 34 mm against Escherichia coli (E. coli) and 41 mm against Staphylococcus aureus (S. aureus). The hydrogels exhibited a cell viability of 80 % with mesenchymal stem cells (MSCs), and the release of collagen II also increased. Furthermore, the PVA/CMC/Shilajit hydrogel exhibited a lower degradation rate compared to the PVA/CMC hydrogel. The results of the swelling, degradation, and drug release studies indicate that the shilajit coating is appropriate for the long-term process of tissue and cartilage regeneration.

Patterned PVA Hydrogels with 3D Petri Dish® Micro-Molds of Varying Topography for Spheroid Formation of HeLa Cancer Cells: In Vitro Assessment.

Cell spheroids are an important three-dimensional (3D) model for in vitro testing and are gaining interest for their use in clinical applications. More natural 3D cell culture environments that support cell-cell interactions have been created for cancer drug discovery and therapy applications, such as the scaffold-free 3D Petri Dish® technology. This technology uses reusable and autoclavable silicone micro-molds with different topographies, and it conventionally uses gelled agarose for hydrogel formation to preserve the topography of the selected micro-mold. The present study investigated the feasibility of using a patterned Poly(vinyl alcohol) hydrogel using the circular topography 12-81 (9 × 9 wells) micro-mold to form HeLa cancer cell spheroids and compare them with the formed spheroids using agarose hydrogels. PVA hydrogels showed a slightly softer, springier, and stickier texture than agarose hydrogels. After preparation, Fourier transform infrared (FTIR) spectra showed chemical interactions through hydrogen bonding in the PVA and agarose hydrogels. Both types of hydrogels favor the formation of large HeLa spheroids with an average diameter of around 700-800 µm after 72 h. However, the PVA spheroids are more compact than those from agarose, suggesting a potential influence of micro-mold surface chemistry on cell behavior and spheroid formation. This was additionally confirmed by evaluating the spheroid size, morphology, integrity, as well as E-cadherin and Ki67 expression. The results suggest that PVA promotes stronger cell-to-cell interactions in the spheroids. Even the integrity of PVA spheroids was maintained after exposure to the drug cisplatin. In conclusion, the patterned PVA hydrogels were successfully prepared using the 3D Petri Dish® micro-molds, and they could be used as suitable platforms for studying cell-cell interactions in cancer drug therapy.

Preparation and Adsorption Photocatalytic Properties of PVA/TiO2 Colloidal Photonic Crystal Films.

Polyvinyl alcohol (PVA)/TiO2/colloidal photonic crystal (CPC) films with photocatalytic properties are presented, where TiO2 nanoparticles were introduced into the PVA gel network. Such PVA/TiO2/CPC films possess three-dimensional periodic structures that are supported with a PVA/TiO2 composite gel. The unique structural color of CPCs can indicate the process of material preparation, adsorption, and desorption. The shift of diffraction peaks of CPCs can be more accurately determined using fiber-optic spectroscopy. The effect of the PVA/TiO2/CPC catalyst films showed better properties as the degradation of methylene blue (MB) by the PVA/TiO2/CPC film catalyst in 4 h was 77~90%, while the degradation of MB by the PVA/TiO2 film was 33% in 4 h, indicating that the photonic crystal structure was 2.3~2.7 times more effective than that of the bulk structure.

Gel-Based PVA/SiO2/p-Si Heterojunction for Electronic Device Applications.

The current work presents a new structure based on Au/PVA/SiO2/p-Si/Al that has not been studied before. An aqueous solution of polyvinyl alcohol (PVA) polymer gel was deposited on the surface of SiO2/Si using the spin-coating technique. The silicon wafer was left to be oxidized in a furnace at 1170 k for thirty minutes, creating an interdiffusion layer of SiO2. The variations in the dielectric constant (Є'), dielectric loss (Є″), and dielectric tangent (tanδ) with the change in the frequency, voltage, and temperature were analyzed. The results showed an increase in the dielectric constant (Є') and a decrease in the dielectric loss (Є″) and tangent (tanδ); thus, the Au/PVA/SiO2/p-Si/Al heterostructure has opened up new frontiers for the semiconductor industry, especially for capacitor manufacturing. The Cole-Cole diagrams of the Є″ and Є' have been investigated at different temperatures and voltages. The ideality factor (n), barrier height (Φb), series resistance (Rs), shunt resistance (Rsh), and rectification ratio (RR) were also measured at different temperatures.

Effective removal of perfluorooctanoic acid from water using PVA@UiO-66-NH2/GO composite materials via adsorption.

This study introduces an innovative approach using highly efficient nanocomposite materials to effectively remove PFAS from water, demonstrating remarkable adsorption capabilities. The nanocomposite was synthesized by integrating a zirconium-based metal-organic framework (MOF) called UiO-66 with graphene oxide (GO) within a polyvinyl alcohol (PVA) matrix. The resulting PVA@UiO-66/GO material features flower-like UiO-66 MOF crystals embedded in the PVA and GO matrix. Various kinetic models were applied to determine the rate constants and adsorption capacities, with the Langmuir isotherm indicating an adsorption capacity of 9.904 mg/g. Thermodynamic analysis confirmed the process's spontaneity and exothermic nature. The UiO-66-NH2/GO/PVA composite also demonstrated high reusability, maintaining substantial PFOA removal efficiency across multiple cycles, with optimal reduction occurring at approximately pH 5. Overall, the PVA@UiO-66/GO composites offer an effective, sustainable, and environmentally friendly solution for PFAS removal in water purification.

Investigation on the mechanical properties of Bacillus subtilis self-healing concrete.

In the process of research and development of self-healing concrete, it is observed that there are three main factors controlling the self-healing effect of concrete: first, the bacteria with repair ability and strong vitality; Second, the carrying capacity of the carrier and the matching degree with concrete; The third is the concentration of bacteria. This paper focuses on the mechanical properties of Bacillus subtilis self-healing concrete with sisal fiber, PVA, and expanded perlite as the carrier. To better study the mechanical properties of self-healing concrete caused by the carrier, the experiment adopts the design parameters of C30 concrete and conducts experiments on compressive resistance, flexural resistance, freeze-thaw cycle, and sulfate corrosion resistance to analyze the influence of different carriers on the mechanical properties of self-healing concrete, and obtains the best carrier. The concentration gradients of three groups of bacterial solution were set as 2od, 2.5od, and 3od, respectively, for comparison to avoid the influence of bacterial concentration. It compared the impact of bacterial solution concentrations on the specimen's mechanical properties, and the effect of carriers was also analyzed. The experimental results show that the mechanical properties of the specimen using 2.5od bacterial liquid concentration with PVA as the carrier have peaked. With the increase in bacterial solution concentration, the specimens' comprehensive mechanical properties increased first and then decreased. The compression resistance of the specimen with PVA is higher than that of the specimen with sisal fiber and expanded perlite. At the same time, the frost resistance and corrosion resistance of the PVA carrier specimen is also higher than that of the specimen with sisal fiber and expanded perlite carrier.

Competitive coordination assisted scalable fabrication of FITC­nickel frameworks anchored nanofiber paper for colorimetric/fluorescent monitoring of shrimp freshness.

A novel type of colorimetric/fluorescent nanopaper indicator has been developed from the melt-extruded poly (vinyl alcohol-co-ethylene) nanofibers with surface anchored metal-organic frameworks (MOFs) by an interfacial coordination strategy. Specifically, the fluorescein isothiocyanate molecules could be anchored to the nanofiber surface by nickel ions and co-assembled into a hydrophilic nanocoating via a dynamic water/alcohol solvent evaporation method. Interestingly, this hydrophilic surface enables fast adsorption of moistures and interaction with biological amine vapors, resulting a saffron cake-layer of MOF nanocrystals with ultra-sensitive colorimetric/fluorescent responses based on an alkaline pH/ammonia induced competitive coordination mechanism. Finally, these porous nanofibrous matrix and active nanocoating make the nano-paper an ultra-sensitive optical platform for in-situ monitoring of the shrimp freshness from mins to weeks. Therefore, this composite film shows great potential into advanced paper-based indicators for food quality control and safety in processing industry.

Comparing embolic particles for prostatic artery embolization to treat lower urinary tract symptoms in patients with benign prostatic hyperplasia.

PURPOSE: Compare the safety and efficacy of polyvinyl alcohol particles (PVA) versus trisacryl gelatin microspheres (Embospheres) versus hydrogel microspheres coated with polyzene-F (Embozenes) for prostatic artery embolization (PAE) to treat patients with benign prostatic hyperplasia (BPH). MATERIALS AND METHODS: A single-center prospective cohort study from 2019 to 2023, including patients with international prostate symptom score (IPSS) ≥ 15 and/or quality of life score (QoL) ≥ 4. Allocation to embolic agents was performed chronologically: 100-300 µm PVA (n = 53), followed by 300-500 µm Embospheres (n = 50), and finally, 400 µm Embozenes (n = 50). All patients were evaluated at baseline and at 1 and 6 months after PAE with IPSS/QoL; peak urinary flow rate, post-void residual volume, and prostate volume with ultrasound and prostate-specific antigen. Adverse events and the need for prostatic re-interventions were assessed. RESULTS: There were no significant baseline differences between the three groups except for patient age (62.5 years PVA; 66.1 years Embospheres and 66.6 years Embozenes; p = 0.019). There were no major adverse events and no differences between groups regarding minor adverse events. All outcome measures improved significantly from baseline, with no significant differences between groups. Mean ± standard deviation IPSS/QoL improvement at 6 months: -10.7 ± 7.9/-2.2 ± 1.7 PVA; -10.4 ± 7.3/-2.0 ± 1.5 Embospheres; -10.4 ± 7.0/-2.2 ± 1.6 Embozenes (p = 0.987). Re-intervention rates after 6 months: 9% (n = 5/53) PVA; 14% (n = 7/50) Embospheres; 8% (n = 4/50) Embozenes (p = 0.591). CONCLUSIONS: PAE with PVA particles, Embospheres, and Embozenes is equally safe and effective in treating BPH-related lower urinary tract symptoms. CLINICAL RELEVANCE STATEMENT: This is the first prospective study showing equivalence between the most frequently used embolic agents for prostatic artery embolization. KEY POINTS: Different particles can be used interchangeably for prostatic artery embolization. The improvements in measured metrics were the same between groups, with no differences in adverse events. The need for prostatic medication and re-intervention rates were the same at 1 and 6 months after embolization.

Electrospun PCL/PVA/PHMB nanofibers incorporating Ziziphus jujuba fruit extract as promising wound dressings with potent antibacterial and antidiabetic properties.

This investigation examined the potential antibacterial and antidiabetic effects of wound dressings created using electrospun nanofibers containing Ziziphus jujuba fruit extract (ZJ). These nanofibers were composed of a combination of Polycaprolactone (PCL), Polyvinyl Alcohol (PVA), and Polyhexamethylene Biguanide (PHMB). The process of creating these nanofibers involved electrospinning. The nanofiber products, which included PCL, PCL/PVA, PCL/PVA/ZJ, PCL/PVA/PHMB, and PCL/PVA/PHMB/ZJ, underwent a morphology, physicochemical, and biological assessment. Incorporating PHMB into the nanofibers enhanced the antibacterial properties, effectively preventing bacterial infections in wounds. Furthermore, including ZJ fruit extract in the nanofibers provided antidiabetic properties, making these dressings suitable for diabetic patients. The PCL/PVA/PHMB/ZJ combination exhibited exceptional healing capabilities and superior antibacterial efficiency in MRSA-infected wounds. The histological assay confirmed complete wound healing by day 14, accompanied by reduced inflammation. Based on these findings, using PCL/PVA/PHMB/ZJ as innovative wound dressings is recommended, as they can expedite wound healing while offering significant antidiabetic and antibacterial features. Ultimately, these electrospun nanofibers possess the potential to serve as advanced wound dressings with enhanced antibacterial and anti-diabetes properties.