Stability and heavy metals accumulation of soil aggregates under different land uses in the southwest coastal Bangladesh.

Agricultural soil contamination is increasing day-by-day and becoming a major problem over the globe. Trace elements accumulation in the bulk soil is frequently documented, however, there is no precise mechanism of their distribution in the different soil aggregates level. We collected twelve composite soil samples from banana fields, fallow land, rice cultivated with pond water (rice field-I), and rice cultivated with rain water (rice field-II). We separated soil samples into four different size of aggregates (4-2, 2-0.25, 0.25-0.053, <0.053-mm) and then, aggregate stability (MWD), soil organic carbon (SOC), and heavy metals content (Pb, Cd, Cr, As, Fe, Mn, Zn, Ni, Co, Cu) in the soil samples were measured with different techniques. Results showed that MWD was higher in the rice-based land use, which was significantly contributed by SOC (p < 0.001). The concentration of Pb, As, Cd, Fe, and Mn were increased, while Cu and Zn concentration were reduced with increasing aggregate size (p < 0.05). In contrast, aggregate size did not influence on Ni and Co accumulation (p > 0.05). Moreover, macroaggregate acted as an accumulator for Fe, Mn, and As, while all the aggregate fractions acted as accumulators for Cu and Zn. Our study indicated that MWD, SOC, aggregate size and composition, and metal species were the controlling factors of trace elements accumulation and distribution in the various sizes of soil aggregates.

Solution-processing induced H-aggregate of Perylene-Diimide Zwitterion Exhibiting Compact Molecular Stacking toward Efficient Cathode Modification in Organic Solar Cells.

High-performance organic cathode interlayers (CILs) play a crucial role in the advance of organic solar cells (OSCs). However, organic CILs have exhibited inferior performances to their inorganic counterparts over a long time, due to the inherent shortcoming of poor charge transporting capability. Here, we designed and synthesized a perylene-diimide (PDI) zwitterion PDI-B as high-performance organic CIL for OSCs. We revealed that an obvious H-aggregate of PDI-B was formed during the solution processing, thereby significantly enhancing the charge transporting capability of the CIL. Compared to the classic PDINN, the π-π stacking distance of PDI-B was reduced from 4.2 Å to 3.9 Å, which further facilitated the charge transport. Consequently, PDI-B showed a high conductivity of 1.81×10-3S/m; this is comparable to that of inorganic CILs. The binary OSC showed an elevated PCE of 19.23%, which is among the highest PCE values for binary OSCs. Benefitting from improved solvent resistance and good compatibility with large-area processing method of PDI-B, the photovoltaic performances of inverted and 1-cm2 OSC were significantly improved. The results from this work provide a new approach of optimizing the condensed structure of PDI film to boost the charge conductivity, opening an avenue to develop high-performance PDI-based CILs.

Recycle of steel slag as cementitious material and fine aggregate in concrete: mechanical, durability property and environmental impact.

Using steel slag (SS) as cementitious material and fine aggregate in concrete is an effective and environmental method for SS consumption and cost reduction. In this paper, SS was recycled in large volumes in concrete as partial cementitious material and fine aggregate. The compressive strength and reaction mechanism of cementitious material with different SS powder contents including 20%, 25%, 30%, and 35% were presented. The results indicated that 20% of SS powder improved the compressive strength by 34.57% and the hydration products were ettringite (AFt) and calcium silica hydrate(C-(A)-S-H). Furthermore, the mechanical and durability performance of concrete with SS as fine aggregate were investigated. When the SS substitution rate was 75%, the compressive strength was increased by 37.83%. The volume shrinkage rate and 28d-carbonation depth were reduced nearly by 64% for 90 days and 2.33 mm, respectively. The chloride ion penetration resistance reached the optimal grade Q-V and abrasion resistance was improved by nearly 24%. Along with the reduced CO2 by 210-294 kg/m3 and the decreased cost by 12.61 USD/m3, it is regarded as an effective method to consume steel slag. As such, this research provided a scientific and systematic basis for the large-scale disposal and utilization of industrial waste residues as well as recycled materials preparation.

A comparative assessment of uncrushed-river concrete mix of Hari-River, and Kamar-Kalaq: the two widely used concrete mix in Herat, Afghanistan.

Concrete, as a cornerstone of modern construction, heavily relies on the quality of its constituent materials, particularly aggregates. Among the critical factors contributing to high-quality concrete are proper gradation, absence of clay particles, and angular shape of aggregates. Adhering to these standards typically results in concrete with superior strength. However, aggregates sourced from riverbeds often possess a natural gradation, contain clay particles, and have rounded shapes. This study delves into a comparative analysis of aggregates sourced from two widely utilized riverbed regions, namely Hari-River and Kamar-Kalaq, situated within Herat province, Afghanistan. Given that over 90% of concrete in Herat province is sourced from these two riverbeds, the findings of this study carry immense significance. The research meticulously examines key parameters, including clay content, gradation, aggregate shape, and compressive strength, to determine the optimal choice for concrete production. Methodologically, samples were acquired following ASTM standards, and rigorous testing procedures were conducted, encompassing clay particle analysis, sieve analysis, and strength testing. The results reveal significant disparities between the two regions, with Hari-River demonstrating superior characteristics across various metrics. Particularly noteworthy is Hari-River's lower clay content of 2.7% compared to Kamar-Kalaq's 3.7%. The gradation of Hari-River for both coarse and fine aggregates is superior to that of Kamar-Kalaq when compared to size 67 aggregate range. Additionally, the average 28 days concrete compressive strength of Hari-River aggregates is 27.8 MPa, while that of Kamar-Kalaq is 23.4 MPa.

Engineering and physicochemical characterization of a novel, stable, symmetric bispecific antibody with dual target-binding using a common light chain.

Bispecific antibodies (BsAbs) have emerged as a major class of antibody therapeutics owing to their substantial potential in disease treatment. While several BsAbs have been successfully approved in recent years, ongoing development efforts continue to focus on optimizing various BsAbs tailored to particular antigens and action mechanisms, aiming to achieve favorable physicochemical properties. BsAbs generally encounter challenges due to their unfavorable physicochemical characteristics and poor manufacturing efficiencies, highlighting the need for optimization to achieve reliable productivity and developability. Herein, we describe the development of a novel symmetric BsAb, REGULGENT™ (N-term/C-term), comprising two Fab domains, using a common light chain. The heavy chain fragment encoded two antigen-binding determinants in one chain. The design and production of REGULGENT™ (N-term/C-term) are simple owing to the use of the same light chain, which does not induce heavy and light chain mispairing, frequently observed with the asymmetric BsAb format. REGULGENT™ (N-term/C-term) exhibited high expression and low aggregation characteristics during cell culture and stress treatment under low pH conditions. Differential scanning calorimetric data indicated that REGULGENT™ molecules had high conformational stability, similar to that of stabilized monoclonal antibodies. Surface plasmon resonance data showed that REGULGENT™ (N-term/C-term) could bind to two antigens simultaneously and exhibited a high affinity for two antigens. In summary, the symmetric BsAb format of REGULGENT™ confers its desirable IgG-like physicochemical properties, thus making it an excellent candidate for commercial development. The findings demonstrate a novel BsAb with substantial development potential for clinical applications.

The association between the aggregate index of systemic inflammation and risk of rheumatoid arthritis: retrospective analysis of NHANES 1999-2018.

Objective: The investigation purpose was to examine the correlation between the aggregate index of systemic inflammation (AISI) and rheumatoid arthritis (RA) by utilizing the NHANES database from the years 1999 to 2018. Methods: The NHANES database was utilized to extract data spanning from 1999 to 2018. AISI, comprising neutrophils (NEU), monocytes (MONO), platelets (PLT), and lymphocytes (LYM), was computed based on counts. The identification of RA patients was accomplished through questionnaire data. To investigate the connection between AISI and RA, a weighted multivariate regression and subgroup analysis were conducted. In addition, restricted cubic splines (RCS) were employed for examining non-linear associations. Results: The study encompassed a total of 41,986 patients, among whom 2,642 (6.29%) were diagnosed with RA. Upon controlling for all covariates, the outcomes of the multivariate logistic regression assay demonstrated a statistically significant association between higher Ln(AISI) levels and elevated odds of RA (odds ratio [OR]: 1.097; 95% confidence interval [CI]: 1.096-1.099, p < 0.001). The interaction test findings indicate that there is no statistically significant impact within this particular association. The results of the RCS regression model revealed a non-linear pattern in the correlation between Ln(AISI) and RA. The threshold level of AISI for RA was determined as 298.9. The risk of RA rises steeply when AISI surpasses the threshold value. Conclusion: Overall, a positive association has been observed between AISI and RA. This study highlights the potential of AISI as an innovative, vital, and appropriate inflammatory biomarker for predicting the risk of developing rheumatoid arthritis in older individuals residing in the United States.

Redesigned chondroitinase ABC degrades inhibitory chondroitin sulfate proteoglycans in vitro and in vivo in the stroke-injured rat brain.

Injuries to the central nervous system, such as stroke and traumatic spinal cord injury, result in an aggregate scar that both limits tissue degeneration and inhibits tissue regeneration. The aggregate scar includes chondroitin sulfate proteoglycans (CSPGs), which impede cell migration and axonal outgrowth. Chondroitinase ABC (ChASE) is a potent yet fragile enzyme that degrades CSPGs, and thus may enable tissue regeneration. ChASE37, with 37-point mutations to the native enzyme, has been shown to be more stable than ChASE, but its efficacy has never been tested. To answer this question, we investigated the efficacy of ChASE37 first in vitro using human cell-based assays and then in vivo in a rodent model of stroke. We demonstrated ChASE37 degradation of CSPGs in vitro and the consequent cell adhesion and axonal sprouting now possible using human induced pluripotent stem cell (hiPSC)-derived neurons. To enable prolonged release of ChASE37 to injured tissue, we expressed it as a fusion protein with a Src homology 3 (SH3) domain and modified an injectable, carboxymethylcellulose (CMC) hydrogel with SH3-binding peptides (CMC-bp) using inverse electron-demand Diels-Alder chemistry. We injected this affinity release CMC-bp/SH3-ChASE37 hydrogel epicortically to endothelin-1 stroke-injured rats and confirmed bioactivity via degradation of CSPGs and axonal sprouting in and around the lesion. With CSPG degradation shown both in vitro by greater cell interaction and in vivo with local delivery from a sustained release formulation, we lay the foundation to test the potential of ChASE37 and its delivery by local affinity release for tissue regeneration after stroke.

The role of wild red deer on soil physical properties in a Mediterranean ecosystem: insights from a Portuguese mountain.

In this study we aimed to assess the role of wild red deer, along with other ungulates such as roe deer and wild boar, in the soil's physical properties, namely soil penetration resistance and depth (used as a proxy for soil compaction), hydraulic conductivity (a proxy for water infiltration), and the proportion of soil stable aggregates. Results showed that, at the density level found in our study area, red deer have a neutral effect at the soil level, not causing significant soil compaction or significantly influencing measured soil functions.

Effect of curing conditions on cement based self-compacting mortar produced with mortar waste aggregate.

Concrete and mortar wastes, which have a large volume and economic value among construction demolition wastes, are the most targeted demolition waste group to be recycled. An important area where construction demolition waste can be utilized is self-compacting mortar (SCM) systems. SCMs are innovative and economical systems designed to minimize the labor requirements that are difficult to meet in the production process. In this study, mortar waste aggregate (MWA) obtained by mechanical crushing and grinding was used in SCM elements by substituting different ratios (5-10-20-30-40 %) by mass to aggregate. In this way, it was aimed to evaluate both the sustainability of MWAs and the usability of MWAs in SCMs, which are considered as a new production technology. The fresh and hardened mortar tests performed in the study are presented comparatively. The physical (dry unit volume weight, porosity), durability (capillary water absorption) and mechanical properties (flexural tensile, compressive strength) of the hardened SCM elements are based on the determinations made at 3, 7 and 28 test days and according to different curing conditions (water curing, air curing and heat curing). In addition, X-ray Diffractometer (XRD) analysis was performed on specimens obtained from 0 %, 10 %, 20 % and 40 % MWA substituted specimens after heat curing (after 7 days water curing) and 28 days water curing. In the light of the data obtained, it is reported that SCM production with 10 % MWA substitution is feasible in terms of sustainability and engineering properties evaluated in this study.

Investigating the potential of waste glass in paver block production using RSM.

The global surge in glass waste generation, exceeding 130 million tons annually, presents a pressing environmental issue, compounded by inadequate recycling practices, it is concerning that the global recycling rate for glass waste is below 50%. This research investigates the utilization of WG as a FA substitute in paver block to mitigate the ecological footprint of conventional paver block while enhancing its mechanical properties. WG's unique characteristics, such as high silica content and impermeability, make it a promising alternative. A comprehensive experimental approach, including tests like water absorption, dry density, workability, compressive strength, ultrasonic pulse velocity, and rebound hammer, demonstrated WG's potential to improve concrete's durability and performance. For instance, a 40% WGA replacement reduced the absorption rate 12%, while 20% WGA incorporation-maintained strength properties close to the control mix, with compressive strengths up to 30.80 MPa at 28 days. Employing RSM as predictive models, the study showed R2 values of 0.9513, 0.9983, 0.9156, 0.9925, and 0.9895 for water absorption, dry density, compressive strength, ultrasonic pulse velocity, and rebound hammer, respectively. This study offers supporting global research efforts to advance sustainable and affordable construction materials, leading to a significant reduction in landfill waste and the conservation of precious natural resources worldwide.

Cobalt (II) porphyrin nanoaggregates as sacrificial templates to improve the peroxidase-like activity of light-controlled TiO2-based nanozymes for colorimetric determination of amikacin.

Although porphyrin modification can improve the peroxidase-like activity of some inorganic nanozymes, it is hardly studied that metal porphyrin self-assembled nanoaggregates as sacrificial templates to turn on the peroxidase-like activity of inorganic nanozymes under light illumination. In this work, cobalt (II) 5,10,15,20-Tetrakis (4-carboxylpheyl)porphyrin (CoTCPP) self-assembled nanoaggregates are firstly used as soft templates to prepare TiO2-based nanozymes with the enhanced peroxidase-like activity. Interestingly, CoTCPP nanoaggregates can be changed into Co oxide nanoparticles dispersed into the nanosphere composites. Furthermore, the peroxidase-like activity of CoTCPP-TiO2 nanospheres can be controlled by light illumination. Comparatively, CoTCPP-TiO2 nanoshperes exhibit the highest peroxidase-like activity of three nanospheres (CoTCPP-TiO2, H2TCPP-TiO2 and TiO2) with similar morphology under the light illumination. Other than the existence of oxygen vacancy, the formation of heterostructure between TiO2 and a small amount of Co3O4 are ascribed to increase the catalytic activity of CoTCPP-TiO2 composites. Thus, a facile and convenient colorimetric sensing platform has been constructed and tuned by light illumination for determining H2O2 and amikacin in a good linear range of 20-100 and 50-100 µM with a limit of detection (LOD) of 3.04 µM and 1.88 µM, respectively. The CoTCPP-TiO2 based colorimetric sensing platform has been validated by measuring the amikacin residue in lake water.

Microbial community dynamics in different floc size aggregates during nitrogen removal process upgrading in a full-scale landfill leachate treatment plant.

Upgrading processes to reduce biodegradable organic substance addition is crucial for treating landfill leachate with high pollutant concentrations, aiding carbon emission reduction. Aggregate size in activated sludge processes impacts pollutant removal and sludge/water separation. This study investigated microbial community succession and driving mechanisms in different floc-size aggregates during nitrogen removal progress upgrade from conventional to partial nitrification-denitrification in a full-scale landfill leachate treatment plant (LLTP) using 16S rRNA gene sequencing. The upgrade and floc sizes significantly influenced microbial diversity and composition. After upgrading, ammonia-oxidizing bacteria were enriched while nitrite-oxidizing bacteria suppressed in small flocs with homogeneity and high mass transfer efficiency. Larger flocs enriched Defluviicoccus, Thauera, and Truepera, while smaller flocs enriched Nitrosomonas, suggesting their potential as biomarkers. Multi-network analyses revealed microbial interactions. A deep learning model with convolutional neural networks predicted nitrogen removal efficiency. These findings guide optimizing LLTP processes and understanding microbial community dynamics based on floc size.

Formation mechanism and stability of egg white fluid gels under ultrahigh-pressure homogenization pretreatment and synergistic heating effect.

The thermal sterilization process of protein beverages inevitably leads to the formation of insoluble thermal aggregates, greatly reducing the texture and taste of protein beverages. In this study, homogenized egg white (HEW) was obtained by ultrahigh-high-pressure (UHP) homogenization pretreatment of egg white (EW), and then a special egg white fluid gel (EWFG) was prepared by water bath heating. The results showed that the optimal conditions for preparing EWFG were three cycles at 20 MPa homogenizing pressure and heating in a water bath at 72℃ for 10 min. Under these conditions, the EWFG was a milky-white homogeneous liquid with an average particle size of about 560 nm. Measurements of the physicochemical properties of HEW and EWFG showed that the UHP homogenization treatment reduced the viscosity of HEW, decreased the particle size of protein aggregates, and increased the zeta potential, which altered the interactions of proteins during the subsequent heating process and facilitated the formation of homogeneous and dispersed EWFG. EWFG showed good stability at pH 6-10 and in low-concentration saline and medium-concentration sucrose solutions. The EWFG obtained by the present treatment is more suitable for factory-scale production and has great potential for protein beverage applications.

Biocompatibility and antimicrobial effect of demineralised dentin matrix hydrogel for dental pulp preservation.

Regeneration of dentin and preserving pulp vitality are essential targets for vital pulp therapy. Our study aimed to evaluate a novel biomimetic pulp capping agent with increased dentin regenerative activities. To produce demineralised dentin matrix (DDM) particles, human extracted teeth were ground and treated with ethylene diamine tetra-acetic acid solution. DDM particles were added to sodium alginate and this combination was dripped into a 5% calcium chloride to obtain DDM hydrogel (DDMH). The eluants of both DDMH and mineral trioxide aggregate (MTA) were tested using an MTT assay to detect their cytotoxic effect on dental pulp stem cells (DPSC). Collagen-I (COL-I) gene expression was analysed on DPSC exposed to different dilutions of pulp capping material eluants by real-time quantitative polymerase chain reaction. Acridine orange staining was used to monitor the cell growth over the tested materials. Agar diffusion assay was utilised to test the antibacterial effect of DDMH and MTA compared to controls. MTT assay revealed that neat eluates of DDMH promoted DPSC viability. However, neat eluates of MTA were cytotoxic on DPSC after 72 h of culture. Moreover, DPSC were capable of growth and attached to the surface of DDMH, while they showed a marked reduction in their number when cultured on the MTA surface for one week, as shown by the acridine orange stain. In DPSC cultured with DDMH eluates, the COL-I gene was overexpressed compared to those cultured with MTA eluants. DDMH had significant antimicrobial activity in comparison to MTA after 24 h incubation. This in vitro study showed that DDMH could be an alternative pulp capping agent for regenerative endodontics.

Postoperative pain after total pulpotomy and root canal treatment in mature molars according to the new and traditional classifications of pulpitis: a prospective, randomized controlled trial.

BACKGROUND: The aim of this study was to compare postoperative pain following total pulpotomy (TP) and root canal treatment (RCT) in mature molar teeth with irreversible pulpitis. To compare the traditional pulpitis classification system with the Wolters system in evaluating postoperative pain. METHODS: Eighty mandibular molars with irreversible pulpitis were included and classified according to the Wolters (moderate/severe pulpitis). The teeth were randomly assigned to two groups (RCT or TP). RCT was performed following standardized protocols. TP was performed to the level of the canal orifices, and hemostasis was achieved with 2.5% sodium hypochlorite. A 3 mm layer of MTA was placed as the pulpotomy material. The teeth were restored with glass ionomer cement followed by composite. Pain scores were recorded preoperatively and, at 6, 12, 24, 48, and 72 h and 7 days after the interventions. The data were statistically analyzed using the Mann-Whitney U test, the Friedman test, the Wilcoxon signed-rank test, and the Spearman's correlation test. The significance level was set at 0.05. RESULTS: Sixty-four patients were analyzed at the one-week follow-up and all were diagnosed as irreversible pulpitis according to the AAE; 22 teeth were classified as moderate and 42 teeth were classified as severe pulpitis according to Wolters. There was no significant difference between TP and RCT in pain scores in moderate pulpitis patients (p > 0.05). There was a significant difference between TP and RCT at 24 and 72 h of severe pulpitis; higher pain scores were observed in the RCT (p < 0.05). CONCLUSIONS: In patients with moderate pulpitis, the TP procedure allowed symptom relief more quickly than RCT. In patients with severe pulpitis, TP provided for significantly lower pain scores compared to RCT at both 24 and 72 h. CLINICAL TRIAL REGISTRATION: The study was retrospectively registered with ClinicalTrials.gov (NCT05923619). Date of Registration: 06/16/23.

Soil organic carbon fractions and their stability under different land uses in wind erosion area of Northeast China.

Exploring the physical fractions of organic carbon and influencing mechanisms in grassland, forest, and farmland soils in wind erosion area can provide scientific basis for carbon sequestration, land utilization, wind prevention measure making, and fertility restoration of sloping farmland in the region. We examined the differentiation of aggregate organic carbon and density fractionation organic carbon in 0-15 cm soil layer across grassland, forest, and sloping farmland with 350 m long and 5° slope gradient in the wind erosion area of Meilisi District, Qiqihar, Heilongjiang, as well as the sloping farmland in the downhill section, middle section, and uphill section with every 100 m apart from the bottom to the top. The results showed that soil aggregates >2 mm were all destroyed across grassland, forest, and farmland soils, while the percentage of aggregates <0.053 mm was significantly higher than that of other sizes. The percentage of various soil aggregates, organic carbon content from density fractionations, and the proportion of organic carbon in the heavy fraction aggregates in farmland were significantly lower than that in grassland and forest soils. Soil aggregates in the uphill section of farmland were completely destroyed, and organic carbon content in various size aggregates and density fractionations gradually decreased with increasing slope. The proportion of organic carbon in the heavy fraction aggregates decreased, but that in light fraction aggregates increased gradually. Soil organic carbon and available potassium were key factors affecting aggregate stability, aggregate organic carbon content, and organic carbon content in density fractionations, while the loss of organic carbon in aggregate led to a decrease in aggregate stability. In summary, compared with grassland and forest soils, the stability of soil aggregates, the aggregate organic carbon content, the organic carbon content in density fractionations, and the proportion of organic carbon in heavy fraction aggregates in farmland all decreased in the wind erosion area of Northeast China. With the increases of slope, the aggregate organic carbon content, the organic carbon content in density fractionations, and the proportion of organic carbon in the heavy fraction aggregates in sloping farmland all decreased. Planting trees, conserving and expanding grassland area, and increasing the application of organic materials in sloping farmland in wind erosion area are effective approaches to stabilize and increase carbon storage, improve soil structure, and enhance soil quality.

Enzymolysis Modes Trigger Diversity in Inhibitor-α-Amylase Aggregating Behaviors and Activity Inhibition: A New Insight Into Enzyme Inhibition.

Inhibitors of α-amylase have been developed to regulate postprandial blood glucose fluctuation. The enzyme inhibition arises from direct or indirect inhibitor-enzyme interactions, depending on inhibitor structures. However, an ignored factor, substrate, may also influence or even decide the enzyme inhibition. In this work, it is innovatively found that the difference in substrate enzymolysis modes, i.e., structural composition and concentration of α-1,4-glucosidic bonds, triggers the diversity in inhibitor-enzyme aggregating behaviors and α-amylase inhibition. For competitive inhibition, there exists an equilibrium between α-amylase-substrate catalytic affinity and inhibitor-α-amylase binding affinity; therefore, a higher enzymolysis affinity and concentration of α-1,4-glucosidic structures interferes the balance, unfavoring inhibitor-enzyme aggregate formation and thus weakening α-amylase inhibition. For uncompetitive inhibition, the presence of macromolecular starch is necessary instead of micromolecular GalG2CNP, which not only binds with active site but with an assistant flexible loop (involving Gly304-Gly309) near the site. Hence, the refined enzyme structure due to the molecular flexibility more likely favors the inhibitor binding with the non-active loop, forming an inhibitor-enzyme-starch ternary aggregate. Conclusively, this study provides a novel insight into the evaluation of α-amylase inhibition regarding the participating role of substrate in inhibitor-enzyme aggregating interactions, emphasizing the selection of appropriate substrates in the development and screening of α-amylase inhibitors.

Changes in Soil Aggregate Carbon Components and Responses to Plant Input during Vegetation Restoration in the Loess Plateau, China.

Vegetation restoration is an effective measure to cope with global climate change and promote soil carbon sequestration. However, during vegetation restoration, the turnover and properties of carbon within various aggregates change. The effects of plant source carbon input on surface soil and subsurface soil may be different. Thus, the characteristics of carbon components in aggregates are affected. Therefore, the research object of this study is the Robinia pseudoacacia forest located in 16-47a of the Loess Plateau, and compared with farmland. The change characteristics of organic carbon functional groups in 0-20 cm, 20-40 cm, and 40-60 cm soil layers were analyzed by Fourier near infrared spectroscopy, and the relationship between the chemical structure of organic carbon and the content of organic carbon components in soil aggregates was clarified, and the mechanism affecting the distribution of organic carbon components in soil aggregates was revealed in the process of vegetation restoration. The results show the following: (1) The stability of surface aggregates is sensitive, while that of deep aggregates is weak. Vegetation restoration increased the surface soil organic carbon content by 1.97~3.78 g·kg-1. (2) After vegetation restoration, the relative contents of polysaccharide functional groups in >0.25 mm aggregates were significantly reduced, while the relative contents of aromatic and aliphatic functional groups of organic carbon were significantly increased. The opposite is true for aggregates smaller than 0.25 mm. (3) With the increase in soil depth, the effect of litter on organic carbon gradually decreased, while the effect of root input on the accumulation of inert carbon in deep soil was more lasting.

Mechanochemical Upcycling of Waste Polypropylene into Warm-Mix Modifier for Asphalt Pavement Incorporating Recycled Concrete Aggregates.

To solve the problems on resource utilization and environmental pollution of waste concrete and waste polypropylene (PP) plastics, the recycling of them into asphalt pavement is a feasible approach. Considering the high melting temperature of waste PP, this study adopted a thermal-and-mechanochemical method to convert waste PP into high-performance warm-mix asphalt modifiers (PPMs) through the hybrid use of dicumyl peroxide (DCP), maleic anhydride (MAH), and epoxidized soybean oil (ESO) for preparing an asphalt mixture (RCAAM) containing recycled concrete aggregate (RCA). For the prepared RCAAM containing PPMs, the mixing temperature was about 30 °C lower than that of the hot-mix RCAAM containing untreated PP. Further, the high-temperature property, low-temperature crack resistance, moisture-induced damage resistance, and fatigue resistance of the RCAAM were characterized. The results indicated that the maximum flexural strain of the RCAAM increased by 7.8~21.4% after using PPMs, while the sectional fractures of the asphalt binder were reduced after damaging at low temperature. The use of ESO in PPMs can promote the cohesion enhancement of the asphalt binder and also improve the high-temperature deformation resistance and fatigue performance of the RCAAM. Notably, the warm-mix epoxidized PPMA mixture worked better close to the hot-mix untreated PPMA mixture, even after the mixing temperature was reduced by 30 °C.

Property Enhancement of Recycled Coarse Aggregate and Its Concrete under CO2-Accelerated Curing Treatment.

The poor properties of recycled coarse aggregate (RCA) and recycled coarse aggregate concrete (RCAC) are considered key constraints hindering the reuse of this waste resource in marine engineering. The CO2-based accelerated carbonation method, which utilizes the alkali aggregate properties of RCA to achieve CO2 uptake and sequestration while significantly enhancing its properties, has attracted widespread attention. However, the degree of improvement in the properties of RCA under different initial moisture conditions (IMCs) and aggregate particle sizes (APSs) after CO2-accelerated carbonation remains unclear. Moreover, the quantitative effect of carbonated recycled coarse aggregate (CRCA), which is obtained from RCA samples with the optimal initial moisture conditions, on the improvement of RCAC under optimal accelerated carbonation modification conditions still needs to be studied in depth. For this investigation, a CO2-accelerated carbonation experiment was carried out on RCA samples with different IMCs and APSs, and the variations in the properties of RCA with respect to its IMC and APS were assessed. The degree of accelerated carbonation modification of RCA under different IMCs and APSs was quantified, and the optimal initial moisture conditions for enhancing the properties of the RCA were confirmed. By preparing concrete specimens based on the natural coarse aggregate, RCA, and CRCA with the best initial moisture conditions (considering the same concrete-water proportion), the effect of CRCA on the workability, mechanical properties, and durability of the corresponding concrete specimen was determined. The findings of this study can be used to effectively promote the sustainable development of marine science and engineering in the future and contribute to global dual-carbon goals, which are of great practical significance and scientific value.