Do Cementless Stems Match Any Hip? A Description of Anthropometric Measurements of the Proximal Femur in Colombia.

Background: Leg length discrepancy following hip arthroplasty causes dissatisfaction to the patient; thus, preoperative planning and implant selection is critical. The purpose of this study was to measure the articular-trochanteric distance (ATD) and femoral neck length (FNL) in our population and compare them to those of 3 of the most used uncemented stems. Methods: In this cross-sectional study, 401 hip radiographs of healthy adults were collected between January and July 2022. The vertical ATD and FNL were measured. A linear regression model was used to identify the relationship between these measurements and age, sex, and height. A logistic regression model was used to assess the matching of native hips with the neck length of the stem. Results: Mean age was 60 years, and 74.56% were women. In 94.3% of hips, the ATD was negative, 3.73% neutral, and 2% positive. In our population, 0.25% of FNL were shorter than POLARSTEM (Smith & Nephew, UK), 10.72% shorter than MetaFix stem (Corin, UK), and 11.97% shorter than Corail stem (DePuy Synthes, USA). In the logistic regression analysis, matching for the POLARSTEM was associated with age but not with sex or height. Conversely, for MetaFix and Corail, stem matching was associated with sex and height. Conclusions: Anthropometric hip measurements vary among individuals, and variables such as age, sex, and height must be considered during preoperative planning and implant selection to avoid leg length discrepancy. Additional studies, including different implants, are required to guide surgeons in selecting a femoral stem that best matches the patient's native hip.

Lower Extremity Arterial Calcification Predicts Referral to a Closed Unit After Primary Total Hip Arthroplasty.

BACKGROUND: We aimed to determine the association between lower extremity arterial calcification (LEAC) and referral to a closed unit (CU), length of stay, 90-day readmissions, and 1-year mortality in primary total hip arthroplasty (THA) patients. METHODS: We retrospectively analyzed 705 patients who underwent primary THA, identifying 64 patients (9.13%) who had LEAC and 641 who did not have LEAC. Patients who had LEAC were older (77 ± 10.0 versus 67 ± 11.5 years; P < 0.001) and had more comorbidities, except for a history of thromboembolic and oncologic diseases (P > 0.05). A preoperative antero-posterior pelvic radiograph was used to assess the presence of LEAC. Admission to CU, length of stay, 90-day readmissions, and 1-year mortality were recorded. A logistic regression model was used to identify risk factors for referral to CU. RESULTS: Patients who had LEAC had a higher incidence of admission to the intensive care unit (8 of 64 [12.5%] versus 8 of 641 [1.09%]; P < 0.001), a longer hospital stay (4.7 ± 1.8 versus 4.2 ± 1.3 days; P = 0.006), more readmissions (16 of 64 [25%] versus 33 of 641 [5.15%]; P < 0.001), and a higher 1-year mortality rate (6 of 64 [9.3%] versus 0 of 641 [0%]; P < 0.001) than patients who did not have LEAC. Of the patients who had LEAC admitted to CU, only 3 of 8 had a previous indication to do so in the preoperative assessment performed by the Department of Anesthesiology, while all non-LEAC ones referred to CU did so. Logistic regression analysis showed that LEAC was a risk factor for admission to CU (odds ratio = 4.77; 95% confidence interval: 1.12 to 20.25; P = 0.034). CONCLUSIONS: The presence of LEAC was a risk factor for transfer to CU, longer in-hospital stays, more readmissions, and a higher 1-year mortality rate. Identifying patients who have LEAC can aid in the preoperative assessment and risk stratification of patients planned for primary THA.

Locked Stem Reverse Total Shoulder Arthroplasty for Complex Proximal Humerus Fracture in the Elderly: Clinical and Radiological Short-Term Results.

Purpose: To evaluate both the short-term clinical and radiological results of reverse shoulder arthroplasty (RSA) with uncemented locked stem in the management of a proximal humerus fracture (PHFs) in the elderly. Methods: Retrospective study including 40 consecutive 3-4 part proximal humerus fractures treated with reverse shoulder arthroplasty with a minimum of 24 months follow-up. In all the cases, the greater tuberosity (GT) was reattached with a standardized suture technique and a local horseshoe bone graft. All the patients were assessed at the 24-month follow-up with Constant-Murley Score (CMS) and Visual Analog Score (VAS). Radiographic healing of the greater tuberosity was noted in addition to stem locking screws radiographic changes. Complications and revision rates were reported. Results: Mean final CMS for this cohort was 80 points. The greater tuberosity healed in the anatomic position in 90% of the cases (N = 36), obtaining an average CMS of 80 in these patients. Healing of the greater tuberosity did not occur in 10% of the cases (N = 4), obtaining an average CMS of 60. All patients scored above 100° in forward elevation with a mean of 140°. Mean active external rotation was 30°. Low-grade scapular notching was reported in <1% of the cases. Major complications were reported in one patient with an acromial fracture. No complications or loosening of stem locking screws were noted. There were no reoperations. Conclusion: In the elderly population, reverse shoulder arthroplasty utilizing a fracture-specific locking stem, low-profile metaphysis, suture-friendly groove, meticulous suture technique, and local bone grafting allows adequate fixation, variable prosthesis height adjustment, and enhances greater tuberosity healing. This approach yields positive short-term clinical outcomes without complications related to the stem's locking screws. Level of Evidence: Level IV Retrospective Case Series.

SHORT-TERM EVALUATION BETWEEN POLYETHYLENE THICKNESS IN PRIMARY TOTAL KNEE ARTHROPLASTY.

Objective: The objective of the research was to carry out a comparative study between Smith & Nephew ® or Zimmer ® prostheses with thick versus thin polyethylene, in patients undergoing primary total knee arthroplasty, during a short-term follow-up. Thus, the objective was to analyze the survival of the implants in question under the clinical and radiographic aspect. Methods: The sample was divided into two groups: Group 1 with thick polyethylene and group 2 with thin polyethylene. A clinical analysis of the patients was carried out and the implants were checked for loosening. Results: The groups were similar when compared. According to the Ahlbäck classification, 83% of the patients were in groups IV and V. The median functional score in the postoperative period was similar between the two groups. Postoperatively, the tibiofemoral angle fluctuated between 5 and 6 0 valgus on average. Two complications were observed in each group. None of the evaluated patients presented implant loosening. Conclusion: Patients treated with thick polyethylene had the same functional score as the control group, as well as the absence of radiographic changes in this short-term follow-up, with implant survival and a similar rate of complications between both groups. Level of evidence III, Retrospective study.

Objetivo: O objetivo desta pesquisa foi realizar um estudo comparativo entre as próteses Smith & Nephew ® e Zimmer ®, com polietileno espesso versus o fino, em pacientes submetidos à artroplastia total primária do joelho, durante um seguimento de curto prazo. Dessa forma, foi analisada a sobrevida dos implantes em questão sob o aspecto clínico e radiográfico. Métodos: A amostra foi dividida em dois grupos: grupo 1 com polietileno espesso e grupo 2 com polietileno fino. Foi realizada análise clínica dos pacientes e verificado se ocorreu soltura dos implantes. Resultados: Os grupos tiveram resultados semelhantes quando comparados. Segundo a classificação de Ahlbäck, 83% dos pacientes eram dos grupos IV e V. A mediana do escore funcional no pós-operatório foi similar entre os grupos. No pós-operatório o ângulo tíbio-femoral oscilou na média entre 5 e 6 0 de valgo. Foram observadas duas complicações em cada grupo. Nenhum dos pacientes avaliados apresentou soltura do implante. Conclusão: Os pacientes tratados com o polietileno espesso apresentaram o mesmo escore funcional do grupo controle, assim como ausência de alterações radiográficas nesse seguimento de curto prazo, com sobrevida do implante e índice de complicações similar entre ambos os grupos. Nível de evidência III, Estudo retrospectivo.

Impact of Kinesiotherapy Rehabilitation on Quadriceps Femoris Muscle Strength and Functionality in Total Hip Arthroplasty Patients / Impacto de la Rehabilitación con Kinesioterapia en la Fuerza y Funcionalidad del Músculo Cuádriceps Femoral en Pacientes con Artroplastía Total de Cadera

SUMMARY: The objective was measure quadricep strength after Total Hip Arthroplasty (THA) and kinetic treatment and then determine its impact on the functional recovery of patients with hip osteoarthritis. A total of 79 (25 were male and 54 were female) patients with THA. Exclusion criteria were previous extra-system kinetic treatment, operated on for hip fracture, not completing the treatment. Maximum Isometric Strength (MIS), Time Up and Go (TUG), Modified Harris Hip Score. There was a significant increase in the MIS of the post-treatment operated knee extension in both men and women (p < 0.0001 SE = 0.43; p < 0.0001 SE = 1.22, respectively). In the TUG, the execution time was significantly lower post-treatment in both men and women (p < 0.0001 SE = 0.77; p < 0.0001 SE = 0.94, respectively). The final Harris score increased significantly post-treatment in male and female (p < 0.0001 SE = 2.90; p < 0.0001 SE = 1.96, respectively). the association between MIS and the Harris score, it was noted that, for a 1 kg increase in this measure compared to the initial assessment, the Harris score, after 12 weeks of treatment, increased by 0.179 points (β = 0.179; p = 0.050). The conclusions were Indicate an increase in knee extension MIS of the operated hip after treatment in both sexes. At the same time, functionality increased post-treatment in both male and female.

El objetivo del estudio fue medir la fuerza del músculo cuádriceps femoral después de la artroplastia total de cadera (THA, por sus siglas en inglés) y el tratamiento kinésico, para determinar su impacto en la recuperación funcional de pacientes con osteoartritis de cadera. En el estudio participaron 79 pacientes con THA (25 hombres y 54 mujeres). Se excluyeron quienes tuvieron tratamiento Kinésico previo fuera del hospital, operación por fractura de cadera y no completar el tratamiento. Las principales medidas tomadas fueron: Fuerza Máxima Isométrica (MIS), Time UP and GO (TUG), Puntuación Modificada de Harris de Cadera. Hubo un aumento significativo en la MIS de la extensión de rodilla del lado operado después del tratamiento tanto en hombres (p<0,0001, EE=0,43) como en mujeres (p<0,0001, EE=1,22). En el TUG, el tiempo de ejecución fue significativamente menor después del tratamiento en hombres (p<0,0001, EE=0,77) y mujeres (p<0,0001, EE=0,94). La puntuación final de Harris aumentó significativamente después del tratamiento en hombres (p<0,0001, EE=2,90) y mujeres (p<0,0001, EE=1,96). En cuanto a la asociación entre MIS y la puntuación de Harris, se observó que por cada aumento de 1 kg en esta medida en comparación con la evaluación inicial, la puntuación de Harris aumentó en 0,179 puntos después de 12 semanas de tratamiento (β=0,179; p=0,050). En conclusión se observó un aumento en la MIS de la extensión de rodilla del lado operado después del tratamiento en ambos sexos. Al mismo tiempo, la funcionalidad aumentó después del tratamiento tanto en hombres como en mujeres.

Patellar reconstruction in primary total knee arthroplasty using bone chips from routine cuts: A case report and review of literature.

BACKGROUND: Total patellectomy is currently reserved for exceptional cases, such as recalcitrant patellofemoral instability and comminuted fractures, due to its demonstrated negative impact on knee biomechanics. Therefore, managing patellectomy is crucial to mitigate its inherent deleterious effects. Various techniques have been described, including autologous or allogeneic bone grafts for reconstruction and soft tissue realignment to enhance the extensor mechanism. CASE SUMMARY: A 73-year-old male underwent a patellectomy due to a comminuted fracture, subsequently developing osteoarthritis and experiencing a decline in functional status. Concurrent with total knee replacement, we conducted a patellar reconstruction, incorporating routine bone cuts and utilizing bone chips to fashion a new patella. This intervention resulted in the restoration of full extension and improvement of knee function. CONCLUSION: Patellar reconstruction demonstrates benefits on knee mechanics and stabilization, contributing to enhanced outcomes and satisfaction following knee replacement. We present an affordable technique for managing patellectomized patients undergoing total knee replacement.

Partial Shoulder Arthroplasty Guided by Three-dimensional Prototyping.

Three-dimensional (3D) printing technology is a reality in medicine. In Orthopedics and Traumatology, 3D printing guides a precise and tailored surgical treatment. Understanding and disseminating its applicability, use, and outcomes can foster academicism and improve patient care. This is a report of a rare case of a female young adult patient with osteonecrosis of the humeral head due to avascular necrosis developed in early childhood. The treatment was tailored and optimized with 3D printing, which helped determine the steps for partial humeral arthroplasty.

High-grade Pleomorphic Sarcoma Associated with Metallosis in a Patient with Total Hip Arthroplasty.

Although the relationship between hip arthroplasty and the development of sarcoma was first described in the literature about forty years ago, this association is extremely rare. In the present case report, we describe the association between orthopedic implants and soft tissue sarcoma in a 79-year-old man who underwent primary total hip arthroplasty (THA) for coxarthrosis 24 years ago. In the present case report, we describe the clinical evolution and the radiographic and histopathological findings of the lesion. In the intraoperative period of the second revision surgery, loosening of the acetabular and femoral components in association with extensive areas of necrosis and metallosis was evidenced. We performed debridement of the hip and right thigh region and removed the implants. Due to the extent of the lesion and to necrosis, it was not possible to perform a new joint reconstruction. The histopathological diagnosis of high-grade undifferentiated pleomorphic sarcoma associated with extensive areas of metallosis was confirmed in tissue adjacent to the implant. The patient developed pulmonary metastases and died 6 months after the diagnosis. Despite the rarity of this association, sarcomas should be considered in the differential diagnosis of aseptic loosening, especially in the presence of metallosis in the peri-implant tissue. To our knowledge, the 24-year latency period between primary THA and the establishment of a sarcoma diagnosis is one of the longest reported to date.

Custom-made Trabecular Metal Acetabular Component in Total Hip Revision.

The following case report aims to demonstrate a total hip arthroplasty revision surgery (THARS) using a custom-made trabecular metal acetabular component for correction of a severe acetabular defect. Currently, in the literature, there are few complete descriptions of surgical planning and procedures involving customized prostheses. This is due to the inherent technical difficulty of the surgical procedure and the high costs related to the planning and materials.

[Translated article] Total hip arthroplasty with second generation dual mobility system as a treatment for primary coxarthrosis, medium-term results.

INTRODUCTION: Osteoarthritis is a disabling pathology characterised by joint pain and stiffness. A prevalence of coxarthrosis of 7.4% is reported in our country. Total hip joint replacement is indicated in advanced stages, a procedure that is not free of complications, the most frequent being prosthetic dislocation, which can be prevented with dual mobility systems. The following study aims to determine the rate of complications and clinical outcomes in dual mobility systems in primary coxarthrosis. MATERIALS AND METHODS: A retrospective study included 120 cases in 114 patients diagnosed with grade III coxarthrosis, mean age was 62.43 years, with a mean follow-up of 4.5 years. Joint replacement was performed by Hardinge approach. All cases were assessed clinically using the Harris Hip Score (HHS) and radiologically to demonstrate mid-term results. RESULTS: The preoperative value on the HHS scale had a mean of 56.45, postoperative at one month 74.23; 6 months 85.40; 1 year 94.01 and at 5 years 94.84 points, representing a functional improvement of 17.78 postoperative month; 28.95 at 6 months postoperative; 37.56 at one year postoperative and 38.39 points at 5 years postoperative. A complication rate of 3.44%; 0.86% of complications were associated with the prosthetic components. CONCLUSION: The dual mobility system should be considered as a therapeutic option in primary hip joint replacement due to excellent functional results and low complication rates. EVIDENCE LEVEL: IV. Retrospective observational case series study.

Early Intraprosthetic Dislocation of Total Hip Arthroplasty with Double Mobility Implant: Case Report.

Total hip arthroplasty (THA) is a successful surgery in the treatment of hip pain, but there are potential complications, of which dislocation is one of the most common. Dislocation management is a challenging problem that requires a multimodal approach, and the use of dual mobility implants is an option. We present a patient with a history of femoral neck fracture who underwent THA with a double mobility implant. On the 18 th postoperative day, after a fall to the ground, she developed prosthesis dislocation and had a complication after closed reduction, a subsequent intraprosthetic dislocation. After a radiographic diagnosis, the patient presented mechanical signs of hip flexion caused by a disassociated double mobility implant. The revision surgery was indicated, but the patient chose not to perform the necessary surgical procedure. A careful postoperative study of the radiographs revealed an eccentric femoral head and evidence of disassociated implantation in the surrounding soft tissues. Radiographs after closed reduction of intraprosthetic dislocations should be examined thoroughly.

Polymethyl Methacrylate for Elbow Arthroplasty: Is There Another Way?

Polymethyl methacrylate remains the only US Food and Drug Administration-approved method of total elbow arthroplasty fixation and exhibits high aseptic loosening rates that result in challenging revision surgeries and potential morbidity secondary to bone-cement implantation syndrome. In this policy paper, the authors aim to explore the historical background of polymethyl methacrylate and the complications that arise in association with its use. We will review arthroplasty trends in the elbow and lower extremities and the challenges with the US Food and Drug Administration-approval process.

LONG-TERM OUTCOMES OF USING VARIOUS GRAIN ALLOGRAFT SIZES IN PAPROSKY TYPE 3.

Introduction: Severe acetabular bone defects can pose challenges in revision total hip replacement. The use of structural allografts and various sizes of grain allografts has been proposed as an alternative surgical technique for treating Paprosky type 3 acetabular defects. This study aimed to evaluate the long-term outcomes and potential complications associated with this approach. Methods: A retrospective review was performed on 102 hip reconstructions in patients with major acetabular bone loss, including 81 cases of type 3A and 21 cases of type 3B according to Paprosky's classification. Surgical procedures involved the use of structural allografts and various sizes of grain allografts in both reinforcement ring group and cementless cups group. Results: At a mean follow-up of 82.75 months, 76% of hips had no complications, while The others experienced pain changes in the cup position, post-operative dislocations, and infections. The mean pre-operative Modified Harris Hip Score improved in both groups at the last follow-up. Conclusion: The use of structural allografts and various sizes of grain allografts for treating type 3 acetabular defects in revision total hip replacement showed promising long-term outcomes and a low rate of complications. Level of Evidence IV; Retrospective Case Series.

Introdução: Defeitos ósseos acetabulares graves podem representar desafios na revisão da artroplastia total do quadril. O uso de aloenxertos estruturais e aloenxertos de grãos de vários tamanhos foram propostos como uma técnica cirúrgica alternativa para o tratamento de defeitos acetabulares Paprosky tipo 3. O objetivo deste estudo foi avaliar os resultados de longo prazo e as possíveis complicações associadas a essa abordagem. Métodos: Foi realizada uma revisão retrospectiva de 102 reconstruções de quadril em pacientes com grande perda óssea acetabular, incluindo 81 casos do tipo 3A e 21 casos do tipo 3B de acordo com a classificação de Paprosky. Os procedimentos cirúrgicos envolveram o uso de aloenxertos estruturais e aloenxertos de grãos de vários tamanhos, tanto no grupo do anel de reforço quanto no grupo das próteses sem cimento. Resultados: Em um acompanhamento médio de 82,75 meses, 76% dos quadris não apresentaram complicações, enquanto os demais apresentaram dor, alterações na posição da prótese, luxações pós-operatórias e infecções. A pontuação média pré-operatória do escore de quadril modificado de Harris melhorou em ambos os grupos no último acompanhamento. Conclusão: O uso de aloenxertos estruturais e aloenxertos de grãos de vários tamanhos para o tratamento de defeitos acetabulares do tipo 3 na substituição total do quadril de revisão mostrou resultados promissores em longo prazo e uma baixa taxa de complicações. Nível de Evidência IV; Série de Casos Retrospectivos.

[Long-term clinical and radiological results of metatarsophalangeal resection arthroplasty in patients with large forefoot deformities]. / Resultados clínicos y radiológicos a largo plazo de la artroplastía de resección metatarsofalángica en pacientes con grandes deformidades del antepié.

INTRODUCTION: metatarsophalangeal resection arthroplasty is considered a salvage surgical procedure able to improve the quality of life of patients with major forefoot deformities. MATERIAL AND METHODS: a retrospective observational study of 31 patients (36 feet) with major forefoot deformities operated at our institution was performed. Thirty two feet required additional surgery involving the first ray, most of them (72.2%) through MTP joint fusion. The mean follow-up period was 10.3 ± 4.6 years. Most patients were women (87.1%), the mean age was 74.2 ± 11.5 years. RESULTS: at the final follow-up, mean AOFAS score was 77.9 ± 10.2 points and mean MOxFQ score was 18.3 ± 8.3 points. Visual analog scale (VAS) for pain improved significantly from 7.5 ± 1.2 points to 3.4 ± 2.1 points on average. Good clinical results were also reported on ability to put on shoes comfortably. The mean resection arthroplasty spaces at the end of the study were 1.3, 1.8, 2.5 and 4.4 mm, for second to fifth rays, respectively. The mean sizes of remodeling osteophytes at the end of the study were 1.6, 1.4, 1.1 and 0.7 mm, respectively. Significant improvement was also achieved in the hallux valgus angle (HVA) and intermetatarsal angle (IMA) at the end of the study. CONCLUSION: in our experience, metatarsophalangeal resection arthroplasty continues to be a valid choice in patients with major forefoot deformities, with satisfactory long-term clinical and radiographic results.

INTRODUCCIÓN: la artroplastía de resección metatarsofalángica se considera un procedimiento quirúrgico de salvamento capaz de mejorar la calidad de vida de pacientes con deformidades importantes en el antepié. MATERIAL Y MÉTODOS: se realizó un estudio observacional retrospectivo de 31 pacientes (36 pies) con deformidades importantes en el antepié operados en nuestra institución. Treinta y dos pies requirieron cirugía adicional que involucró el primer metatarsiano, la mayoría de ellos (72.2%) a través de la fusión de la articulación metatarsofalángica. El período de seguimiento promedio fue 10.3 ± 4.6 años. La mayoría de los pacientes fueron mujeres (87.1%), con una edad promedio de 74.2 ± 11.5 años. RESULTADOS: en la última visita de seguimiento, la puntuación AOFAS promedio fue de 77.9 ± 10.2 puntos y la puntuación MOxFQ promedio fue de 18.3 ± 8.3 puntos. La escala visual analógica (EVA) para el dolor mejoró significativamente, pasando de 7.5 ± 1.2 puntos a 3.4 ± 2.1 puntos de media. También se constataron buenos resultados clínicos en cuanto a la capacidad de calzarse con comodidad. Los espacios de resección promedio al final del estudio fueron 1.3, 1.8, 2.5 y 4.4 mm para el segundo al quinto radio, respectivamente. Los tamaños promedio de los osteofitos por remodelación al final del estudio fueron de 1.6, 1.4, 1.1 y 0.7 mm, respectivamente. También se logró una mejora significativa en el ángulo de hallux valgus (AHV) y en el ángulo intermetatarsiano (IMA) al final del estudio. CONCLUSIÓN: en nuestra experiencia, la artroplastía de resección metatarsofalángica sigue siendo una opción válida en pacientes con deformidades graves del antepié, con resultados clínicos y radiográficos satisfactorios a largo plazo.

[Bilateral total hip arthroplasty in a 15-year-old patient with progressive pseudorheumatoid dysplasia. Case report and literature review]. / Artroplastía total de cadera bilateral en paciente de 15 años con displasia progresiva pseudorreumatoide. Reporte de caso y revisión bibliográfica.

Progressive pseudorheumatoid dysplasia (PPD) is an autosomal recessive hereditary disease of very low prevalence. It is characterized by the affection of multiple joints, generating arthrosis and progressive deformities from a very young age, which significantly affect the quality of life of patients. Its diagnosis is only confirmed by genetic testing, and no specific pharmacological treatment is still available. In the case of hip involvement, one treatment option is arthroplasty. In this case report, we present a 15-year-old boy with bilateral coxarthrosis secondary to PPD who underwent bilateral total hip arthroplasty in two stages. We highlight the characteristics of this rare entity, the intraoperative findings, the functional outcomes, and the impact on quality of life.

La displasia progresiva pseudorreumatoide (DPP) es una enfermedad hereditaria autosómica recesiva, de muy baja prevalencia. Se caracteriza por la afección de múltiples articulaciones, generando artrosis y deformidades progresivas desde muy temprana edad, que afectan considerablemente la calidad de vida de los pacientes. Su diagnóstico sólo se confirma por análisis genéticos y aún no se dispone de tratamiento farmacológico específico. Ante la afectación de la cadera, una opción de tratamiento está representada por la artroplastía. En este reporte de caso, presentamos un joven de 15 años, con coxartrosis bilateral secundaria a DPP, al cual se le realizó una artroplastía total de cadera bilateral, en dos tiempos. Destacamos las características propias de esta extraña entidad, los hallazgos intraoperatorios, sus resultados funcionales y el impacto en la calidad de vida.

Operating Room Air May Harbor Pathogens: The Role of an Ultraviolet Air Filtration Unit.

BACKGROUND: One important factor for the prevention of surgical site infections is ultraclean air in the operating room (OR). Still, the direct sterilization potential of most technologies, especially in a dynamic clinical setting, is not well understood. We aimed to determine and compare the microbial presence from the inlet and outlet flow of a filtration unit with crystalline ultraviolet-C (C-UVC) light. METHODS: A prospective study was conducted at a single institution, where primary total joint arthroplasty and spine surgeries were performed. The OR was fitted with a positive ventilation system. In addition, a filtration unit with a C-UVC sterilizing light was placed in the OR. The inlet and outlet air flows were swabbed simultaneously and compared. Swabs were processed for culture and next-generation sequencing. RESULTS: The mean length of the surgical procedures sampled was 68 ± 13 minutes. Overall, 19 out of 200 (9.5%) swabs isolated microorganisms. Inlet air swabs were positive at a higher rate (16 versus 3%; P < .01) compared to the outlet air swabs. A wide variety of Gram-positive, Gram-negative, and anaerobic bacteria were isolated, but fungi were only recovered from inlet air swabs. The detection of microorganisms was also higher when more door openings were performed (32.5 ± 7.1 versus 27.9 ± 5.6; P < .01). CONCLUSIONS: Air swabs mainly isolated microorganisms from the inlet flow to the filtration unit with a C-UVC light. The sterilizing unit counteracted factors affecting the air quality in the OR, namely door openings, surgical personnel, and tissue combustion.

Navigated augmented reality through a head-mounted display leads to low deviation between planned, intra- and postoperative parameters during glenoid component placement of reverse shoulder arthroplasty: a proof-of-concept case series.

BACKGROUND: Navigated augmented reality (AR) through a head-mounted display (HMD) has led to accurate glenoid component placement in reverse shoulder arthroplasty (RSA) in an in-vitro setting. The purpose of this study is to evaluate the deviation between planned, intraoperative, and postoperative inclination, retroversion, entry point, and depth of the glenoid component placement during RSA, assisted by navigated AR through an HMD, in a surgical setting. METHODS: A prospective, multicenter study was conducted. All consecutive patients undergoing RSA in 2 institutions, between August 2021 and January 2023, were considered potentially eligible for inclusion in the study. Inclusion criteria were as follows: age >18 years, surgery assisted by AR through an HMD, and postoperative computed tomography (CT) scans at 6 weeks. All participants agreed to participate in the study and informed consent was provided in all cases. Preoperative CT scans were undertaken for all cases and used for 3-dimensional (3D) planning. Intraoperatively, glenoid preparation and component placement were assisted by a navigated AR system through an HMD in all patients. Intraoperative parameters were recorded by the system. A postoperative CT scan was undertaken at 6 weeks, and 3D reconstruction was performed to obtain postoperative parameters. The deviation between planned, intraoperative, and postoperative inclination, retroversion, entry point, and depth of the glenoid component placement was calculated. Outliers were defined as >5° for inclination and retroversion and >5 mm for entry point. RESULTS: Seventeen patients (9 females, 12 right shoulders) with a mean age of 72.8 ± 9.1 years (range, 47.0-82.0) met inclusion criteria. The mean deviation between intra- and postoperative measurements was 1.5° ± 1.0° (range, 0.0°-3.0°) for inclination, 2.8° ± 1.5° (range, 1.0°-4.5°) for retroversion, 1.8 ± 1.0 mm (range, 0.7-3.0 mm) for entry point, and 1.9 ± 1.9 mm (range, 0.0-4.5 mm) for depth. The mean deviation between planned and postoperative values was 2.5° ± 3.2° (range, 0.0°-11.0°) for inclination, 3.4° ± 4.6° (range, 0.0°-18.0°) for retroversion, 2.0 ± 2.5 mm (range, 0.0°-9.7°) for entry point, and 1.3 ± 1.6 mm (range, 1.3-4.5 mm) for depth. There were no outliers between intra- and postoperative values and there were 3 outliers between planned and postoperative values. The mean time (minutes : seconds) for the tracker unit placement and the scapula registration was 03:02 (range, 01:48 to 04:26) and 08:16 (range, 02:09 to 17:58), respectively. CONCLUSION: The use of a navigated AR system through an HMD in RSA led to low deviations between planned, intraoperative, and postoperative parameters for glenoid component placement.

Early Intraprosthetic Dislocation of Total Hip Arthroplasty with Double Mobility Implant: Case Report / Luxação intraprotética precoce de artroplastia total do quadril com implante de dupla mobilidade: Relato de caso

Abstract Total hip arthroplasty (THA) is a successful surgery in the treatment of hip pain, but there are potential complications, of which dislocation is one of the most common. Dislocation management is a challenging problem that requires a multimodal approach, and the use of dual mobility implants is an option. We present a patient with a history of femoral neck fracture who underwent THA with a double mobility implant. On the 18th postoperative day, after a fall to the ground, she developed prosthesis dislocation and had a complication after closed reduction, a subsequent intraprosthetic dislocation. After a radiographic diagnosis, the patient presented mechanical signs of hip flexion caused by a disassociated double mobility implant. The revision surgery was indicated, but the patient chose not to perform the necessary surgical procedure. A careful postoperative study of the radiographs revealed an eccentric femoral head and evidence of disassociated implantation in the surrounding soft tissues. Radiographs after closed reduction of intraprosthetic dislocations should be examined thoroughly.

Resumo A artroplastia total do quadril (ATQ) é uma cirurgia bem-sucedida no tratamento da dor no quadril, mas existem complicações potenciais, das quais a luxação é uma das mais comuns. O gerenciamento das luxações é um problema desafiador que requer uma abordagem multimodal, e o uso de implantes de mobilidade dupla é uma opção. Apresentamos uma paciente com história de fratura do colo do fêmur que foi submetida a ATQ com um implante de dupla mobilidade. No 18° dia pós-operatório, após queda ao solo, a paciente evoluiu com luxação da prótese e teve uma complicação após redução fechada, uma luxação intraprotética subsequente. Após um diagnóstico radiográfico, a paciente apresentou sinais mecânicos na flexão do quadril causados por um implante de mobilidade dupla desassociado. A cirurgia de revisão foi indicada, mas a paciente optou por não realizar o procedimento cirúrgico necessário. O estudo pós-operatório cuidadoso das radiografias revelou uma cabeça femoral excêntrica e evidências do implante desassociado nos tecidos moles circundantes. As radiografias após a redução fechada das luxações intraprotéticas devem ser examinadas minunciosamente.

Anatomic Total Shoulder Arthroplasty Outcomes Were Not Negatively Affected by the COVID-19 Pandemic / Os desfechos da artroplastia anatômica total do ombro não foram afetados negativamente pela pandemia de Covid-19

Abstract Objective To investigate whether patients undergoing anatomic total shoulder arthroplasty (ATSA) between January and March 2020 experienced different postoperative outcomes than patients in 2019. We hypothesized that patients in 2020 would have less access to physical therapy (PT) and experience different postoperative outcomes. Methods Records from patients who received ATSA between January 1st, 2019, and March 17th, 2019, and January 1st, 2020, to March 17th, 2020, were analyzed. Patient data, including demographic information, range of motion (ROM), strength, and PT was collected and compared between the two groups. The 2020 patients were contacted by phone during October 2022 and patient-reported metrics were gathered. Results The present study identified 24 patients in 2019 and 27 patients in 2020 who underwent ATSA during the specified time frame and had a minimum 1-year follow-up. Patients in 2019 experienced improvements in forward elevation (FE) ROM (125.4° to 146.7°; p = 0.008), external rotation (ER; 33.0° to 47.7°; p < 0.001), and internal rotation (IR; S1 to L4; p = 0.019). Patients in 2020 also experienced significant improvements in FE (120.2° to 141.1°; p = 0.009), ER (32.9° to 42.0°; p = 0.037), and IR (S1 to L3; p = 0.002). Patients in 2020 terminated PT earlier (2019: 125.8 days; 2020: 91.1 days; p = 0.046) and completed fewer sessions (2019: 21.4 sessions; 2020: 13.1 sessions; p = 0.003). At the final follow-up, patients in 2020 reported an average Visual Analogue Scale (VAS) pain score of 1.67 ± 1.1. Conclusion Despite decreased PT, patients who underwent ATSA in 2020 had significant improvements in ROM and strength and were comparable to patients in 2019.

Resumo Objetivo Investigar se os pacientes submetidos à artroplastia total anatômica do ombro (ATAO) entre janeiro e março de 2020 tiveram resultados pós-operatórios diferentes dos pacientes operados em 2019. Nossa hipótese é a de que os pacientes de 2020 teriam menos acesso à fisioterapia (FT) e apresentariam desfechos pós-opera-tórios diferentes. Métodos Foram analisados os prontuários de pacientes submetidos à ATAO de 1° de janeiro de 2019 a 17 de março de 2019 e de 1° de janeiro de 2020 a 17 de março de 2020. Os dados dos pacientes, incluindo informações demográficas, amplitude de movimento (ADM), força e FT foram coletados e comparados entre os dois grupos. Os pacientes de 2020 foram contatados por telefone durante outubro de 2022, e as métricas relatadas por eles pacientes foram coletadas. Resultados Este estudo identificou 24 pacientes em 2019 e 27 pacientes em 2020 que foram submetidos à ATAO durante o período especificado e tiveram acompanhamento mínimo de 1 ano. Os pacientes em 2019 apresentaram melhoras na ADM de elevação anterior (EA; 125,4° a 146,7°; p = 0,008), rotação externa (RE; 33,0° a 47,7°; p < 0,001) e rotação interna (RI; S1 a L4; p = 0,019). Os pacientes em 2020 também apresentaram melhoras significativas de EA (120,2° a 141,1°; p = 0,009), RE (32,9° a 42,0°; p = 0,037) e RI (S1 a L3; p = 0,002). Os pacientes de 2020 terminaram a FT mais cedo (2019: 125,8 dias; 2020: 91,1 dias; p = 0,046) e fizeram menos sessões (2019: 21,4 sessões; 2020: 13,1 sessões; p = 0,003). No acompanhamento final, os pacientes de 2020 relataram uma pontuação média de dor na Escala Visual Analógica (EVA) de 1,67 ± 1,1. Conclusão Apesar da menor realização de FT, os pacientes submetidos à ATAO em 2020 apresentaram melhoras significativas na ADM e na força e foram comparáveis aos pacientes de 2019.

Robot-assisted knee arthroplasty: Analyzing the learning curve and initial institutional experience.

Robot-assisted total knee arthroplasty (rTKA) involves a learning curve for orthopedic surgeons. The aim of the present study was to assess the surgical times of rTKA procedures performed by initial stage and proficiency stage surgeons in comparison with times of conventional total knee arthroplasty (cTKA). The results reveal that the learning curve for rTKA varies considerable between surgeons, suggesting that the skill and aptitude of the individual to adapt to the robotic system play key roles in the learning process. Proficiency stage surgeons were able to reduce rTKA surgical times to levels comparable with those of conventional surgeries after performing approximately 30 to 40 robotic procedures. Ongoing research has shown promising outcomes in terms of improved clinical results and reduced complications following the application of advanced robotic technology to total knee arthroplasty.