RÉSUMÉ
AIM: The objective of the present study was to evaluate the influence of different adhesive strategies regarding shear bond strength (SBS) of provisional resin--based materials bonded to the enamel surface as well as on the enamel surface roughness. MATERIALS AND METHODS: Bovine incisors were randomly divided into six groups (n = 10) according to the adhesive strategy used: BRControl (bis-acrylic resin); Spot-etch+BR (spot-etch + bis-acrylic resin); Spot--etchSB2+BR (spot-etch + adhesive + bis-acrylic resin); Spot-etchZ350Flow+BR (spot-etch + flowable composite resin + bis-acrylic resin); SBU+BR (universal adhesive + bis-acrylic resin); Spot-etchSBMP+Z350 (spot-etch + adhesive + composite resin). The enamel surface roughness was determined by a surface profil-ometer. An SBS test was performed in a universal testing machine, and failure modes were classified under magnification. The SBS data were analyzed by one-way analysis of variance (ANOVA). A paired t test was used for enamel surface roughness intragroup comparisons, and the Friedman one-way repeated meas-ures analysis of variance by ranks was used for differences in enamel surface roughness between groups, with the Tukey post hoc test (a = 0.05). RESULTS: BRControl had the lowest SBS values (MPa), with a significant difference (P ≤ 0.001) from the other groups. Spot-etch+BR had the highest SBS values but with no significant differences from the other groups in which the spot-etch technique was also used. Adhesive failure mode was predominant for all groups. BRControl had the lowest surface roughness difference, significantly different (P = 0.001) from all the other groups. CONCLUSIONS: Spot-etch and other adhesive strategies could be applied to increase the SBS values of provisional restorations to enamel compared with no surface pretreatment. However, the adhesive strategy may change the enamel surface roughness, revealing the importance of cleaning the tooth surface.
Sujet(s)
Résines composites , Collage dentaire , Émail dentaire , Facettes dentaires , Résistance au cisaillement , Propriétés de surface , Animaux , Bovins , Résines composites/composition chimique , Collage dentaire/méthodes , Mordançage à l'acide/méthodes , Analyse du stress dentaire , Résines acryliques/composition chimique , Test de matériaux , Répartition aléatoireRÉSUMÉ
Minocycline, the synthetic derivative of the antibiotic tetracycline, has been used for a variety of medical treatments. One such use for minocycline is for acne vulgaris. Although widely used, minocycline has a common side effect of discoloration of tissues, including bone, skin, and mucosa. This case report presents a 19-year-old female patient with a history of long-term minocycline therapy for acne vulgaris who presented for periodontal esthetic crown lengthening. The initial exam revealed a blue-gray discoloration of the mucosa. Upon surgical exploration, it was discovered that the discoloration originated from the underlying alveolar bone with minimal gingival involvement. Surgical removal and recontouring of the bony exostoses revealed that the bone remained deeply stained. Although the discolored bone was not fully removed, the patient was able to obtain an acceptable esthetic result.
RÉSUMÉ
OBJECTIVES: To evaluate three temporary luting cements in terms of their restoration loss rates, biological interactions, esthetic properties, and handling characteristics. MATERIALS AND METHODS: 75 adults requiring fixed prosthodontics voluntarily participated in a single-blind, randomized controlled trial. After preparation, temporary restorations were luted with a randomly selected temporary luting cement (either Provicol QM Plus (PQP), Bifix Temp (BT), or Provicol QM Aesthetic (PQA)). Clinical examinations were performed one to two weeks after cementation. The following criteria were evaluated: tooth vitality, percussion, hypersensitivity, gingival bleeding, odor formation, esthetics, cement handling, removability, cleanability, and retention loss. Antagonistic teeth served as controls. Statistical analysis was performed using the paired t-test, one-way ANOVA, Pearson's chi-square and Fisher's exact test, where appropriate. RESULTS: The overall loss rate of temporary restorations was 16.0%, showing no cement-specific differences. Postoperative hypersensitivity occurred in 8% of cases regardless of cement type. Esthetic impairment was reported by 31% of the PQP-fixed restorations, compared with 4.0% and 4.2% of the BT and PQA-bonded restorations. Cement application was reported to be easy in 100% of cases, excess removal in 88-96%, depending on the cement used. CONCLUSIONS: The choice of luting material affects the esthetic appearance of a temporary restoration and should be considered, particularly in restorations in esthetically demanding areas. No significant differences between the cements were identified regarding biocompatibility, handling, and loss rate. CLINICAL RELEVANCE: Translucent cements can help to reduce color interferences, resulting in a more appealing appearance of the temporary restoration.
Sujet(s)
Ciments dentaires , Dentisterie esthétique , Humains , Méthode en simple aveugle , Mâle , Femelle , Ciments dentaires/composition chimique , Adulte , Adulte d'âge moyen , Restaurations dentaires temporaires , Sujet âgé , Cimentation/méthodesRÉSUMÉ
BACKGROUND: Silver diamine fluoride (SDF) is becoming more widely recognized as a simple, cost-effective approach to minimize sensitivity and arrest caries. However, SDF results in caries that are stained black. Potassium iodide (KI) treatment with SDF may minimize or lessen the staining. However, the effectiveness of KI on staining has not been investigated. Studies demonstrating that potassium iodide reduces the black staining are still insufficient. This paper presents the study protocol for Healthy Smiles, a randomized controlled trial implemented to compare the staining propensity of SDF and SDF+KI. OBJECTIVE: This study, Healthy Smiles, aims to evaluate the staining propensity of SDF and SDF+KI using a Nix Mini color sensor among children aged 4 to 6 years. Another objective of the study is to evaluate the caries-arresting effect of SDF and SDF+KI in the treatment of carious primary teeth. METHODS: This study is a randomized controlled trial. A total of 60 children with caries that meet the criteria of the International Caries Detection and Assessment System (code 1 or above) will be randomly assigned to treatment groups, where group 1 will be treated with SDF and group 2 will be treated with SDF+KI. Discoloration of treated lesions will be assessed digitally using a Nix Mini color sensor. Participants will be followed up at 1, 3, and 6 months after treatment to digitally record the ∆L and ∆E values using the Nix Mini color sensor. Data will be analyzed using SPSS (version 28; IBM Corp). Independent sample t tests and the Mann-Whitney U test will be used to compare the 2 groups. RESULTS: Enrollment started in October 2023. It is estimated that the enrollment period will be 12 months. Data collection is planned to be completed in 2024. CONCLUSIONS: The presented paper describes Happy Smiles, a project that provides an opportunity to address the aesthetic inconvenience of patients without compromising the effectiveness of the SDF treatment. The trial findings will contribute to the limited evidence base related to discoloration after SDF intervention to improve aesthetic appearances in child oral health. If the results from the trial are promising, it will lead to the development of a model for child oral health and pave the way for further research in child oral health. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): PRR1-10.2196/51087.
Sujet(s)
Caries dentaires , Fluorures topiques , Iodure de potassium , Composés d'ammonium quaternaire , Composés de l'argent , Humains , Fluorures topiques/administration et posologie , Fluorures topiques/pharmacologie , Composés d'ammonium quaternaire/pharmacologie , Enfant d'âge préscolaire , Enfant , Caries dentaires/prévention et contrôle , Femelle , Mâle , Dyschromie dentaire/traitement médicamenteux , Dyschromie dentaire/induit chimiquement , Cariostatiques/administration et posologie , Cariostatiques/pharmacologieRÉSUMÉ
Unique anatomical deviations in canal structure are rare in anterior teeth, especially central incisors, and thus risk being overlooked. For successful intervention, a meticulous diagnostic procedure and treatment plan, significantly aided by cone-beam computed tomography (CBCT), are crucial. The case at hand explores the management of a maxillary left central incisor in a cleft palate patient, characterized by multiple developmental lobes, a bulbous crown, and an atypical root anatomy. The primary symptom was pain, accompanied by a history of trauma at age 8 years and ensuing tooth discoloration. Initial evaluations, augmented by CBCT, revealed pulpal necrosis in a single-rooted tooth with three distinct canals. Initial clinical examination was supplemented by electrical pulp testing, RadioVisioGraphy (RVG), and CBCT, after which the root canal therapy was initiated. Informed consent was obtained from the patient. The access cavity preparation resulted in a three-orifice cavity. Subsequently, the canals were enlarged and sufficiently debrided. Calcium-hydroxide was applied for 2 weeks before the commencement of apexification and obturation, followed by esthetic rehabilitation. This case highlights the importance of recognizing rare anatomical variations in anterior teeth and demonstrates the invaluable role of CBCT in both diagnosing and managing such complexities.
RÉSUMÉ
PURPOSE: In this study, we examined the facial, dental, periodontal, and tomographic features associated with excessive gingival display (EGD) when smiling in young adults self-reporting a "gummy smile," categorized by potential etiology. METHODS: The study included 25 healthy adults (18-42 years old; 23 women and 2 men) who self-reported EGD. Participants completed a health questionnaire and underwent a periodontal examination assessing probing depth, clinical attachment level, keratinized gingival width, and gingival thickness (GT). Extraoral and intraoral photographs were taken for smile analysis and to determine facial and dental characteristics. Cone-beam computed tomography (CBCT), performed with a lip retractor in place, was used to measure the distance from the gingival margin (GM) to the cementoenamel junction (CEJ), the distance from the CEJ to the alveolar crest, buccal bone thickness, and GT. The extent of EGD when smiling was quantified as the distance from the GM at the upper central incisor to the upper lip edge when smiling fully. The smile was categorized into 4 types based on gingival exposure characteristics observed during full smile. RESULTS: Most participants were female (92%), with a mean age of 28.77±6.56 years. The average EGD was 4.2±2.44 mm, extending bilaterally from the anterior to the posterior maxilla. Two primary etiological factors were identified, alone or in combination: vertical maxillary excess (VME), predominantly indicated by an anterior maxillary height greater than 29 mm and a large interlabial gap; and altered passive/active eruption (APE), primarily characterized by square teeth (64%), upper central incisor width-to-height ratio (CIW:CIH) exceeding 87.5%, and GM-CEJ distance on CBCT exceeding 2 mm. CONCLUSIONS: These findings suggest a multifactorial etiology of EGD, primarily associated with VME and APE. Clinical periodontal examination, CBCT conducted with a lip retractor, CIW:CIH, and soft tissue facial cephalometric analysis may aid in identifying the etiological factors of EGD.
RÉSUMÉ
Excessive gingival display (EGD) is defined as more than 2 mm of gingiva display above the maxillary incisors at maximum smile. Various skeletal, dental, and soft tissue etiological factors for EGD have been suggested. This study assessed the effectiveness and stability of surgical (SX) and nonsurgical (NSX) interventions for correction of EGD through a systematic review and meta-analysis following PRISMA 2020 guidelines. An electronic search of Ovid MEDLINE, EMBASE, CENTRAL, Scopus, Web of Science, and LILACS was conducted (2010-2023). Results were expressed as mean change in gingival display using the random-effects model at 1, 3, 6, and 12-month follow-up. At 1 month, SX and NSX treatments yielded a comparable mean reduction of 3.50 mm (2.13-4.86) and 3.43 mm (2.67-4.19) in gingival display, respectively. However, by 6 months, NSX treatments showed a reduction of 0.51 mm compared to 2.86 mm with SX treatments. SX outcomes remained stable past 6 months, while NSX outcomes partially relapsed at 6 months and returned to baseline levels at 12 months. Notably, NSX treatments were more effective in cases with mild initial EGD, while SX treatments showed a better outcome in severe cases. To draw more robust conclusions regarding the treatment outcomes, future primary studies of greater rigor are required.
RÉSUMÉ
INTRODUCTION: When planning esthetic dental treatments, understanding smile preferences is important for dental professionals. This study aimed to evaluate the impact of selected smile characteristics on the attractiveness of young Saudis as assessed by Saudi laypersons and explore gender-preferred changes in smile attractiveness. METHODOLOGY: This observational study assessed the dynamic smile attractiveness of 168 Saudi individuals (84 males and 84 females), selected through non-probability convenience sampling. Dynamic smiles were elicited by viewing comedic content and captured with a camera standardized for consistent positioning. Videos were edited and adjusted to images, and the frames with the most pronounced smiles were chosen. The intra-rater reliability was assessed using intra-class correlation coefficients (ICCs) and Cohen's kappa tests (κ). The highest and lowest 25th percentiles were categorized as attractive and unattractive smiles, respectively, on the visual analog scale (VAS) by laypersons. Six smile characteristics - anterior smile line, smile arc, upper lip curvature, posterior teeth displayed, smile index, and smile symmetry - were quantitatively evaluated from these images for each participant and classified into attractive and unattractive groups based on laypersons' VAS evaluations. Continuous variables were tested with the Mann-Whitney U test, and for the categorical variables, the Chi-square test was applied. The significance was set at 5%. RESULTS: The four randomly selected out of the 22 raters had good VAS reliability; ICCs varied from 0.661 to 0.94, with an average of 0.737, and Cohen's kappa tests for smile characteristics showed values from 0.617 to 0.89. Good agreement was also found with the smile index, with ICCs of 0.775, and dynamic smile symmetry, with ICCs of 0.872. Laypersons rated female smiles as more attractive compared to male smiles (P = 0.004). Low or average anterior smile lines (P = 0.001 for males; P = 0.03 for females), parallel smile arcs (P = 0.001 for males; P = 0.02 for females), and higher smile indexes (P = 0.001 for males; P = 0.004 for females) were significantly attractive, showing no significant gender differences. Conclusions: Laypersons reliably rated the young Saudis' dynamic smiles as attractive. Of the rated smile characteristics, those with a low or average anterior smile line, parallel smile arcs, and a larger smile index were deemed more attractive. This study's findings show no significant gender differences in the impact of the studied smile characteristics on attractiveness. This study's findings can help dental professionals customize treatment plans that meet patients' expectations.
RÉSUMÉ
INTRODUCTION: The recently developed single-shade composite resin (using the concept of structural coloring) is a promising option to eliminate the process and subjectivity of shade selection. However, current evidence of its performance is still insufficient. This study aimed to evaluate the color matching, color stability, and refractive index (RI) of single-shade restorations compared with conventional composite resin. METHODS: This in vitro study was conducted on 48 extracted maxillary premolars. The teeth were sorted into three tooth shade groups (B2, A3, and A3.5). Each group included two subgroups based on the materials used: Omnichroma (OM; Tokuyama Dental, Tokyo, Japan) and Filtek Z350 (FT; 3M ESPE, St. Paul, MN, USA). Buccal and lingual Class V round cavities were prepared and restored according to the randomly assigned subgroups, with the test single-shade material (OM) on one surface and the matching conventional control material (FT) of the proper shade on the other surface of each tooth. Color matching was evaluated by visual assessment and a spectrophotometer. All specimens were distributed into four staining groups and immersed in various staining beverages (black coffee, Arabic coffee, Coca-Cola, and distilled water) for four weeks. Color changes were assessed using a spectrophotometer. Four groups of disc-shaped specimens (single-shade, B2, A3, and A3.5) were fabricated to evaluate the RI using a refractometer. Statistical analyses were performed to compare the materials. RESULTS: The mean value of the color difference (ΔE) of single-shade restorations was significantly higher than that of paired conventional restorations in all shade groups. The highest mean ΔE was in subgroup A3.5-OM (8.84 ± 2.39) and showed significantly less color matching than other OM subgroups (p=0.009). The visual assessment showed comparable and acceptable color matching in all subgroups except A3.5-OM (p=0.006). There was a significant color change after the staining test within and across staining groups, but the color change was comparable between the OM and FT subgroups. The RI of single-shade material was significantly higher than conventional material (p<0.05). CONCLUSION: The color matching of single-shade restorations was affected by tooth shade. Its color stability was influenced by various staining substances but was similar to conventional restorations.
RÉSUMÉ
BACKGROUND: The ceramic soft tissue trimming bur (CeraTip™) was initially introduced for use in gingivoplasty but has recently been used for gingival depigmentation. The aim of this study is to compare the efficacy of depigmentation between the novel CeraTip™ and the gold-standard surgical scalpel technique. METHODS: Eight healthy, nonsmokers with moderate to severe gingival hyperpigmentation in both arches were randomly assigned for CeraTip™ depigmentation in one arch as the test group (TG) and scalpel depigmentation in the opposite arch as the control group (CG). Pigmentation indices were used to assess clinical performance. Treatment time, pain level, and esthetic satisfaction were the parameters of patient experience. The assessments were performed at baseline, one week, one month, and three months. RESULTS: At all assessment visits, pigmentation intensity represented by the Dummet oral pigmentation index (DOPI), and pigmentation distribution represented by the Hedin melanin index (MI), were significantly lower than those at baseline (p < 0.001) in both groups. When comparing the two groups, Scalpel depigmentation had better initial clinical outcomes, while CeraTip™ had less visible repigmentation, pain scores, treatment time, and greater esthetic satisfaction. However, none of the differences were statistically significant. CONCLUSION: Both techniques successfully removed gingival hyperpigmentation with comparable clinical performance. The patients preferred CeraTip™ depigmentation. TRIAL REGISTRATION: The study protocol was registered on 11/09/2023 on the www. CLINICALTRIALS: gov database (NCT06031116) after the approval of the Ethics Committee, Faculty of Dentistry, Ain Shams University (FDASU-Rec012124).
Sujet(s)
Céramiques , Maladies de la gencive , Satisfaction des patients , Humains , Femelle , Adulte , Maladies de la gencive/chirurgie , Mâle , Hyperpigmentation , Dentisterie esthétique , Adulte d'âge moyen , Gencive/chirurgie , Gencive/anatomopathologie , Résultat thérapeutique , Gingivoplastie/méthodesRÉSUMÉ
The purpose of this study was to compare various formulas for idealized proportions of the maxillary incisors to the actual dimensions of natural teeth. The Mondelli formula 1 (MF1), Mondelli formula 2 (MF2), Albers formula (AF), esthetic proportion (EP) for width and height of anterior teeth, and golden ratio (GR) were calculated for a total of 50 dental students (30 women and 20 men) who participated in the study. The following measurements were obtained directly in the participant's mouth with a digital caliper: the mesiodistal and incisogingival dimensions of the maxillary central incisors, lateral incisors, and canines; the intercanine distance; and the smile width. The participants were photographed, and the smile width was also measured on the photographs. The MF1 and MF2 were each calculated twice, using both direct measurements and photographic measurements. The projected central incisor widths calculated using the MF1, MF2, and AF were compared among themselves and against the actual measurements using analysis of variance and Fisher test for multiple comparisons (α = 0.05). The EP and GR were analyzed using descriptive statistics. There was a statistically significant difference between all of the widths projected by the formulas and the actual widths of the central incisors (P < 0.05). Whether calculated from a direct or a photographic measurement, the incisor widths projected by the MF1 and MF2 were statistically similar to each other (P > 0.05). The EP values were similar to those reported in the literature. Only 2% of the participants had an incisor width ratio (central incisor/lateral incisor) that matched the GR of 1.618, while 86% fell within the range of 1.2 to 1.4. Overall, the proportions calculated with the MF1, MF2, AF, EP, and GR did not exactly match the actual dimensions of natural teeth. The formulas and the proportions available in the literature can assist in esthetic planning, but the individual characteristics of each patient and expertise of the dentist should guide treatment for each case.
Sujet(s)
Dentisterie esthétique , Maxillaire , Mâle , Humains , Femelle , Odontométrie , Incisive , Sourire , CanineRÉSUMÉ
INTRODUCTION: Esthetics plays a crucial role in orthodontics and many other dental and medical fields. To date, no study has assessed the combined effects of the 3 facial features 'facial height, gingival display (GD), and buccal corridor size (BC)' on facial/smile beauty. Therefore, this study was conducted for the first time. METHODS: In this psychometric diagnostic study, beauty of 27 randomized perceptometric images of a female model with variations in facial heights (short, normal, long), gingival displays (0, 2, 4, 6 mm), and buccal corridor sizes (2%, 10%, 15%, 20%, 25%) were evaluated by 108 judges (36 orthodontists, 36 dentists, 36 laypeople) using a 5-scale Likert scale (1 to 5). Combined effects of facial heights, GDs, BCs, judges' sexes, ages, and jobs, and their 2-way interactions were tested using a mixed-model multiple linear regression and a Bonferroni test. Zones of ideal features were determined for all judges and also for each group using repeated-measures ANOVAs and the Bonferroni test (α=0.05). RESULTS: Judges' sex but not their age or expertise might affect their perception of female beauty: men gave higher scores. The normal face was perceived as more beautiful than the long face (the short face being the least attractive). Zero GD was the most attractive followed by 4 mm; 6 mm was the least appealing. BCs of 15% followed by 10% were the most attractive ones, while 25% BC was the worst. The zone of ideal anatomy was: long face + 0mm GD + 15% BC; normal face + 2mm GD + 15% BC; long face + 2mm GD + 15% BC; normal face + 0mm GD + 15% BC. CONCLUSIONS: Normal faces, zero GDs, and 15% BCs may be the most appealing. Facial heights affect the perception of beauty towards GDs but not BCs.
Sujet(s)
Orthodontie , Orthodontistes , Mâle , Humains , Femelle , Psychométrie , Dentisterie esthétique , GenciveRÉSUMÉ
OBJECTIVE: To evaluate the profilometric, esthetic, and patient-reported outcomes of peri-implant tissues in the maxillary anterior esthetic zone following guided bone regeneration (GBR) using the L-shape technique combined with delayed connective tissue grafting (CTG). MATERIALS AND METHODS: Profilometric and pink esthetic score (PES) measurements were performed at the time of implant surgery with GBR (T0) and at the 1- (T1), 2- (T2), and 3-year (T3) follow-up. Patient-reported outcomes were also assessed using the Oral Health Impact Profile-14 (OHIP-14) questionnaire. Statistical analysis over 3 years of follow-up assessed changes at time points (T0, T1, T2, and T3) and time periods (T0-T1, T0-T2, and T0-T3) using the Wilcoxon signed-rank test. RESULTS: A total of 12 patients (57.5 ± 12.3 years) were included in this study. The mean profilometric change in peri-implant tissues over the 3-year follow-up period was 3.49 ± 1.11 mm, and the buccal contours were not significantly different between the comparison periods. The PES remained stable, while all OHIP-14 domain scores improved significantly. CONCLUSION: Simultaneous implant placement and GBR using the L-shape technique combined with delayed CTG in the maxillary anterior region provides stable buccal profiles and consistent esthetics and improves patient-reported quality of life over a 3-year period. CLINICAL SIGNIFICANCE: This study demonstrated that GBR using the L-shape technique combined with delayed CTG in the maxillary anterior region improved the buccal profile, esthetics, and patient-reported quality of life.
Sujet(s)
Tissu conjonctif , Dentisterie esthétique , Maxillaire , Mesures des résultats rapportés par les patients , Humains , Adulte d'âge moyen , Femelle , Mâle , Tissu conjonctif/transplantation , AdulteRÉSUMÉ
This report outlines 2 digitally planned cases in which the teeth underwent magnetic extrusion to preserve the supracrestal tissue attachment and regain the ferrule, followed by their restoration. Case 1: A 42-year-old man with the chief concern of a fractured right maxillary second premolar. Following the completion of root canal treatment, the remaining tooth structure was insufficient to create a ferrule for tooth restoration. For this scenario, a rapid magnetic extrusion technique was performed on tooth #4 to obtain an approximate 3-mm ferrule. The condition of both the dentition and the restorative margin was acceptable 18 months following treatment. Case 2: A 62-year-old man with the chief complaint of mobility on both sides of the maxillary arch in relation to a tooth-supported fixed partial denture (FPD). Following removal of the FPD, multiple extractions were carried out and tooth #6 was subjected to magnetic extrusion in 3 stages to a maximum of 4 mm to obtain a ferrule. At the 18-month and 3-year follow-up appointments, the tooth had no symptoms and the gingiva around the restorations had optimal architecture and margins. The 3-dimensional digital planning was helpful in precisely positioning the magnets within the tooth and the provisional restorations to facilitate axial extrusion. The extruded teeth were restored with zirconia crowns in both cases. The beneficial outcomes observed from these cases provides evidence that the integration of digital planning and magnetic extrusion holds promise as a method for reconstructing teeth with crowns that are significantly compromised.
Sujet(s)
Extrusion orthodontique , Humains , Mâle , Adulte d'âge moyen , Adulte , Extrusion orthodontique/méthodes , Prémolaire/imagerie diagnostique , Restaurations dentaires permanentes/méthodes , Magnétisme , Fractures dentaires/imagerie diagnostique , Fractures dentaires/thérapie , Traitement de canal radiculaire/méthodes , Conception assistée par ordinateur , Prothèse partielle fixeRÉSUMÉ
BACKGROUND: The inherently technique-sensitive nature of periodontal plastic procedures demands a significant level of skill and expertise. The incorporation of three-dimensional (3D) printing technologies emerges as a potential strategy to optimize and simplify surgical procedures. This case report describes the digital workflow and presents the clinical outcomes achieved using a guided coronally advanced flap for the treatment of a single gingival recession (GR). METHODS AND RESULTS: A female patient with a gingival recession type 1 (RT1 B-) defect on the mandibular second left premolar underwent successful treatment using a guided coronally advanced flap (g-CAF) and de-epithelized connective tissue graft (CTG). The digital planning included intraoral scanning of the mandible and hard palate using an intraoral scanner, with resulting polygon format (PLY) files exported for virtual model creation. The CAF guide was meticulously designed to orient horizontal and vertical incisions at the papillae base adjacent to the GR defect. For the donor site, a guide was specifically created, positioning the graft area 2 mm apically to the premolars' gingival margins. The delineation of this area involved two horizontal and vertical incisions, meticulously based on the dimensions of the GR. The digitally designed guides were then 3D-printed using a surgical guide-specific resin, contributing to the precise execution of the innovative surgical approach. Complete root coverage was achieved. CONCLUSION: This case report demonstrates that g-CAF can be a promising approach for the treatment of single GR. HIGHLIGHTS: Why is this case new information? To the best of the authors' knowledge, this is the first manuscript to report a guided procedure for the treatment of gingival recession. This report provides the digital workflow for the fabrication of a guide to perform the coronally advanced flap for single recession defects. What are the keys to successfully manage this case? It is necessary to adequately scan the recession defect area and palate. Properly not only design the guide using specific software but also print it. The guide has to be stable when in position for the surgical procedure. What are the primary limitations of this technique? This guide was designed to help surgeons during the incisions. However, it does not provide aid to split and release the flap and suture.
RÉSUMÉ
Purpose: Our in vitro comparative study aimed to investigate the impact of thickness and tooth shade background on the translucency of highly translucent zirconia veneers. Materials and Methods: A total of 75 5Y-TZP zirconia veneers of shade A1 were fabricated with thicknesses of 0.50 mm (n = 25), 0.75 mm (n = 25), and 1.0 mm (n = 25). The translucencies were measured on composite resin teeth with shades A1, A2, A3, A3.5, and A4 using a digital color imaging spectrophotometer. Data were analyzed using ANOVA and post hoc Tukey's test (p < 0.05). Results: The translucency values were optimal for the veneers placed over the substrate teeth with shades A1 and A2, regardless of the veneer thickness. Additionally, veneers with a thickness of 0.50 mm exhibited significantly higher translucency than those with thicknesses of 0.75 mm and 1.0 mm. Conclusions: Our study demonstrated that the translucency of the highly translucent zirconia veneers was influenced by both veneer thickness and tooth shade background. The optimal veneer thickness for achieving the highest translucency was 0.50 for the veneers with A1 and A2 shades placed over the substrate teeth. Clinical Relevance: The optimal thickness for achieving the highest translucency of the highly translucent zirconia laminate veneers was 0.50 mm for the veneers with A1 and A2 shades placed over the substrate teeth. Clinicians and dental technicians could consider this when selecting materials for aesthetic restorations.
RÉSUMÉ
OBJECTIVES: To evaluate the stability of periodontal tissues 3 (T3), 6 (T6), and 12 (T12) months after esthetic crown lengthening (ACL) and the possible correlations between changes in those structures. MATERIALS AND METHODS: Twenty individuals were evaluated through clinical assessment, photography, and tomography. Measurements included gingival margin (GM), clinical crown length (CCL), interdental papilla height (PH) and width (PW), gingival thickness (GT), bone thickness (BT), probing depth (PD), distance between alveolar crest and GM, distance between alveolar crest and cementoenamel junction. Nonparametric and correlation statistics were performed (p < 0.05). RESULTS: CCL at T0 was 7.42 ± 0.70 mm and increased to 9.48 ± 0.49 mm immediately after ACL, but it decreased to 8.93 ± 0.65 mm at T12. PD decreased 0.60 mm from T0 to T6, and it increased 0.39 mm from T6 to T12. BT decreased 0.20 mm, while GT increased 0.29 mm from T0 to T12. Both PW and PH showed enlargement in T12. A positive moderate correlation was found between CCL/T0 and CCL/T12, GT/T0 and AC-GM/T12, BT/T0 and GT/T12. A few negative moderate correlations were PD/T0 and CCL/T12, PD/T0 and PH/T0, PD/T0 and BT/T12. CONCLUSIONS: ACL procedure was effective. Although some rebound occurred, that was not clinically important. PD tended to reestablish its original length, partially due to a migration of GM during the healing period. Besides, a thickening of supracrestal soft tissues was observed. CLINICAL RELEVANCE: The present study centers on the factors influencing the stability of periodontal tissues after esthetic crown lengthening, underscoring the procedure's influence on esthetics and biology and the need for careful treatment planning.
Sujet(s)
Élongation coronaire , Dentisterie esthétique , Humains , Gencive , Parodonte , Processus alvéolaireRÉSUMÉ
This study was performed to evaluate the efficacy of outcome measures for the orofacial domain included in the International Consortium for Health Outcomes Measurement Standard Set for Cleft Lip and Palate (ICHOM-SCS). In this multicentre study involving two cleft centres, suggestions to optimize the type and timing of outcome measures were made based on data and clinical experience. Patient-reported outcome measures (PROMs) (CLEFT-Q Jaw, Teeth, Eating/Drinking; Child Oral Health Impact Profile-Oral Symptoms Scale (COHIP-OSS)) and clinical outcome measures (caries experience and dental occlusion) data were collected retrospectively for age 5, 8, 10, 12, 19, and 22 years. The data were categorized by cleft type and analysed within and between age groups using Spearman correlation, the distribution of responses per item, a two-sample test for equality of proportions, and effect plots. Most correlations between PROMs and clinical outcome measures were weak (r < 0.5), suggesting PROMs and clinical outcome measures complement each other. The COHIP-OSS and CLEFT-Q Eating/Drinking barely detected problems in any patient category and are no longer recommended. A suitable alternative appears complex to find; outcomes of this study and the recent literature doubt an added value. Similar problems were found in the CLEFT-Q Jaw at time-point 12 years. Therefore, time-points 15 and 17 years are currently suggested.
Sujet(s)
Bec-de-lièvre , Fente palatine , Santé buccodentaire , Adolescent , Enfant , Enfant d'âge préscolaire , Femelle , Humains , Mâle , Dentisterie esthétique , , Mesures des résultats rapportés par les patients , Études rétrospectives , Enquêtes et questionnaires , Jeune adulteRÉSUMÉ
OBJECTIVE: Increasing aesthetic demands require that the color and contour of the peri-implant soft tissues be in harmony with the neighboring teeth. Recession, migration toward the apical, is a frequent clinical finding. Its presence can lead to inflammation and increased marginal bone loss. These complications, in addition to affecting the aesthetic results of our treatment, are difficult to treat and can threaten the survival of the implant. There are fewer studies showing the outcome of treatment of soft-tissue defects around implants. The aim of this article is to describe the treatment of a soft-tissue defect around an implant-supported prosthesis treatment, performed on two neighboring implants, in the esthetic zone in a patient with a high smile and to evaluate both the coverage achieved and the patient's esthetic satisfaction. CLINICAL CONSIDERATIONS: This study showed that a mucogingival approach, using a surgical technique designed for the treatment of alveolar ridge defects, together with tissue management with temporaries and a new restoration, achieved an optimal result. CONCLUSIONS: The case has been closely followed up, for 10 years, and the authors have been able to confirm the long-term stability of the result. CLINICAL SIGNIFICANCE: The following paper shows the result of an innovative approach. Connective tissue platform technique, usually performed for soft-tissue augmentation, was used for a defect in soft-tissue dehiscence. The authors followed the results for 10 years, and the results achieved were satisfactory in terms of esthetic.
Sujet(s)
Implants dentaires unitaires , Implants dentaires , Humains , Résultat thérapeutique , Dentisterie esthétique , Pose d'implant dentaire endo-osseux/méthodes , Maxillaire/chirurgieRÉSUMÉ
OBJECTIVE: Demonstrate the ability of 0.5 mm thickness lithium disilicate laminates associated with resin cement to mask different substrate saturations. METHODS: 60 specimens (n = 5) were prepared with CAD/CAM lithium disilicate glass-ceramic IPS e.max CAD, 0.5 mm thick, in three degrees of translucency (HT, MT and LT); cemented by Variolink Esthetic LC Light+ (L) and Neutral (N) on composite resin substrates A1 and A4 shades. Color measurements were performed by a spectrophotometer (CM-3700d -Konica Minolta). The L*, a*, b* parameters of the tri-layer structure (laminate/ resin cement/ substrate) were used to calculate color difference ( ∆ E 00 ) by CIEDE2000 formula and Translucency Parameter ( TP 00 ). This study adopted ∆ E 00 = 0.8, as perceptibility threshold (PT), and ∆ E 00 = 1.8, as acceptability threshold (AT). Statistical analyses were performed by one-way ANOVA and Tukey tests (a = 0.05). RESULTS: Color difference between resin cement shades showed statistical differences (p < 0.0001) and ∆ E 00 > 1.8 for all groups. Color difference between substrates saturations showed a significant statistical difference (p < 0.0001) and ∆ E 00 values above AT for all groups. The TP 00 demonstrated significant statistical differences (p < 0.0001). The LTL combination, the opaquest set, showed the smallest ∆ E 00 values between substrate shades differences, however, above AT. CONCLUSION: The translucency of the lithium disilicate, the substrate saturation and the resin cement opacity influenced final color of restoration. The ceramic translucency impact on final color was reduced by opaque resin cement. Furthermore, the LT lithium disilicate and the Light+ resin cement reduced the translucency of the restoration, contributing to mask saturated substrate. CLINICAL RELEVANCE: This study shows the influence of conservative lithium disilicate laminates with different degrees of translucency associated with resin cement on final color of saturated substrate restorations. A minimally invasive esthetic protocol for masking substrates is demonstrated by associating low translucency ceramic laminates and opaque resin cement.