Simultaneously Promoted Water Resistance and CO2 Selectivity in Methanol Oxidation Over Pd/CoOOH: Synergy of Co-OH and the Pd-Olatt-Co Interface.

Catalytic purification of industrial oxygenated volatile organic compounds (OVOCs) is hindered by the presence of water vapor that attacks the active sites of conventional noble metal-based catalysts and the insufficient mineralization that leads to the generation of hazardous intermediates. Developing catalysts simultaneously with excellent water resistance and a high intermediate suppression ability is still a great challenge. Herein, we proposed a simple strategy to synthesize a Pd/CoOOH catalyst that contains abundant hydroxyl groups and lattice oxygen species, over which a negligible effect was observed on CH3OH conversion with 3 vol % water vapor, while a remarkable conversion reduction of 24% was observed over Pd/Co3O4. Moreover, the low-temperature CO2 selectivity over Pd/CoOOH is significantly enhanced in comparison with Pd/Co(OH)2. The high concentration of surface hydroxyl groups on Pd/CoOOH enhances the water resistance owing to the accelerated activation of H2O to generate Co-OH, which replaces the consumed hydroxyl and facilitates the quick dissociation of surface H2O through timely desorption. Additionally, the presence of Pd-Olatt-Co promotes electron transport from Co to Pd, leading to improved metal-support interactions and weakened metal-O bonds. This in turn enhances the catalyst's capacity to efficaciously convert intermediates. This study sheds new insights into designing multifunctional catalytic platforms for efficient industrial OVOC purification as well as other heterogeneous oxidation reactions.

Deciphering the Underlying Mechanism of the Fourth Entity in Medium-Entropy NiCoFeMP toward Boosting Oxygen Evolution Electrocatalysis.

High-/medium-entropy materials have been explored as promising electrocatalysts for water splitting due to their unique physical and chemical properties. Unfortunately, state-of-the-art materials face the dilemma of explaining the enhancement mechanism, which is now limited to theoretical models or an unclear cocktail effect. Herein, a medium-entropy NiCoFeMnP with an advanced hierarchical particle-nanosheet-tumbleweed nanostructure has been synthesized via simple precursor preparation and subsequent phosphorization. Evaluated as the electrocatalyst for oxygen evolution reaction (OER), the medium-entropy NiCoFeMnP displays a lower overpotential of 272 mV at a current density of 10 mA cm-2, and more favorable kinetics than the binary NiFeP, ternary NiCoFeP, quaternary NiCoFeCuP and NiCoFeCrP counterparts, and other reported high-/medium-entropy electrocatalysts. Careful experimental analyses reveal that the incorporation of Mn can significantly regulate the electronic structure of Ni, Co, and Fe sites. More importantly, the Mn introduction and entropy stabilization effect in the reconstructed metal (oxy)hydroxide simultaneously promote the lattice oxygen mechanism, improving the activity. This work sheds new light on the design of high-/medium-entropy materials from an in-depth understanding of the underlying mechanism for improving energy conversion efficiency.

Importing Atomic Rare-Earth Sites to Activate Lattice Oxygen of Spinel Oxides for Electrocatalytic Oxygen Evolution.

Spinel oxides have emerged as highly active catalysts for the oxygen evolution reaction (OER). However, due to covalency competition, the OER process on spinel oxides often follows an arduous adsorbate evolution mechanism (AEM) pathway. Herein, we propose a novel rare-earth sites substitution strategy to tune the lattice oxygen redox of spinel oxides and bypass the AEM scaling relationship limitation. Taking NiCo2O4 as a model, the incorporation of Ce into the octahedral site induces the formation of Ce-O-M (M: Ni, Co) bridge, which triggers charge redistribution in NiCo2O4. The developed Ce-NiCo2O4 exhibits remarkable OER activity with a low overpotential, satisfactory electrochemical stability, and good practicability in anion-exchange membrane water electrolyzer. Theoretical analyses reveal that OER on Ce-NiCo2O4 surface follows a more favorable lattice oxygen mechanism (LOM) pathway and non-concerted proton-electron transfers compared to pure NiCo2O4, as further verified by pH-dependent behavior and in situ Raman analysis. 18O-labeled electrochemical mass spectrometry directly demonstrates that oxygen originates from the lattice oxygen of Ce-NiCo2O4 during OER. It is discovered that electron delocalization of Ce 4f states triggers charge redistribution in NiCo2O4 through the Ce-O-M bridge, favoring antibonding state occupation of Ni-O bonding in [Ce-O-Ni] site, thereby activating lattice oxygen redox of NiCo2O4 in OER.

Water-Driven Surface Lattice Oxygen Activation in MnO2 for Promoted Low-Temperature NH3-SCR.

Water is ubiquitous in various heterogeneous catalytic reactions, where it can be easily adsorbed, chemically dissociated, and diffused on catalyst surfaces, inevitably influencing the catalytic process. However, the specific role of water in these reactions remains unclear. In this study, we innovatively propose that H2O-driven surface lattice oxygen activation in γ-MnO2 significantly enhances low-temperature NH3-SCR. The proton from water dissociation activates the surface lattice oxygen in γ-MnO2, giving rise to a doubling of catalytic activity (achieving 90% NO conversion at 100 °C) and remarkable stability. Comprehensive in situ characterizations and calculations reveal that spontaneous proton diffusion to the surface lattice oxygen reduces the orbital overlap between the protonated oxygen atom and its neighboring Mn atom. Consequently, the Mn-O bond is weakened and the surface lattice oxygen is effectively activated to provide excess oxygen vacancies available for converting O2 into O2-. Therefore, the redox property of Mn-H is improved, leading to enhanced NH3 oxidation-dehydrogenation and NO oxidation processes, which are crucial for low-temperature NH3-SCR. This work provides a deeper understanding and fresh perspectives on the water promotion mechanism in low-temperature NOx elimination.

Visible Light-Switchable Lattice Oxygen Sites for Selective C-H and C(O)-C Bond Electrooxidation.

Lattice-oxygen is highly oxidizable, ideal for electrocatalytic C-H oxidation but insufficient alone for C(O)-C bond cleavage due to the non-removable nature of lattice sites. Here, we present a visible light-assisted electrochemical method of in-situ formulating removable lattice-oxygen sites in a nickel-oxyhydroxide (ESE-NiOOH) electrocatalyst. This catalyst efficiently converts aromatic alcohols and carbonyls with C(O)-C fragments from lignin and plastics into benzoic acids (BAs) with high yields (83-99%). Without light irradiation, ESE-NiOOH's intrinsic lattice-oxygen is non-removable and inert for C(O)-C bond cleavage. In-situ characterizations show light-induced lattice-oxygen removal and regeneration via OH- refilling. Theoretical calculations identify the nucleophilic oxygen attack on ketone-derived carbanion as a rate-determining step, which can be remarkably facilitated by removable lattice-oxygen to activate α-C-H bonds. As a proof-of-concept, an "electrochemical funnel" strategy is developed for high-efficiency upgrading aromatic mixtures with C(O)-C moieties into BA with up to 94% yield. This in-situ removal-regeneration approach for lattice sites opens an avenue for the tailored design of interfacial electrocatalysts to selectively upcycle waste carbon sources into valuable products.

Regulation Lattice Oxygen Mobility via Dual Single Atoms for Simultaneously Enhancing VOC Oxidation and NOx Reduction.

Synergistic catalytic removal of multipollutants (e.g., volatile organic compound (VOC) oxidation and nitrogen oxide (NOx) reduction) is highly demanded due to the increasingly strict emission standards. The prevention of the key reactive intermediate species nitrite excessive oxidation over the supported noble-metal catalysts, rather than the traditional low-efficiency transition metal oxide catalysts, remains a great challenge. Herein, a sound strategy of Pd single atoms saturated with acidic transition element ligands is proposed. The coexistence of Pd and V dual single atoms strengthens the adsorption of reactants, while synergistic interaction between dual atoms and surface oxygen weakens activation of lattice oxygen, thus significantly reducing the overoxidation of nitrite. Meanwhile, the neutralization of the active Pd and inert V sites results in a rational decrease in the redox property of Pd and an obvious increase in that of V. The Pd1V1/CeO2 dual single-atom catalyst achieves 90% conversion of NOx and toluene at 238 and 230 °C and has a large temperature window (>150 °C) for NOx reduction. This research makes a breakthrough in the development of efficient supported noble-/transition-metal dual single-atom catalysts for VOC and NOx simultaneous purification.

Partially amorphous NiFe layered double hydroxides enabling highly-efficiency oxygen evolution reaction at high current density.

Layered double hydroxide (LDH) serves as an innovative catalyst for water electrolysis, showcasing outstanding performance in the oxygen evolution reaction (OER) under alkaline conditions. However, it faces challenges due to its low electrical conductivity and limited accessibility to active sites. In this work, the flexibility advantages of disordered amorphous and ordered crystals in NiFe LDH were combined to improve OER performance and maintain long-term stability. This combination induces a variety of effects, including improving the intrinsic activity, changing the OER mechanism from adsorb evolution mechanism (AEM) to lattice oxygen mechanism (LOM), and promoting the reaction kinetics of the catalyst. Moreover, the porous structure of NiFe LDH can efficiently alleviate the issue of local acidic environment induced by prolonged OER reaction, satisfying the criteria for long-term stability. Therefore, the NiFe-2.0 LDH catalyst only requires an ultralow overpotential of 189 mV at a current density of 10 mA cm-2 with Tafel slope of 43 mV dec-1. More importantly, the catalyst not only displays excellent electrocatalytic activity with an overpotential of 289 mV but also represents an outstanding stability over 80 h at an ultra-high current density of 1 A cm-2. This study provides a promising strategy for optimizing the catalytic activity and stability of catalyst at ampere current density, which is expected to achieve commercial applications.

Inducing Intermolecular Oxygen Coupling by Introducing S and FeOOH on Co(OH)2 Nanoneedle Arrays for Industrial Water Oxidation.

The design of electrocatalysts for oxygen evolution reaction (OER) remains a limitation of industrial hydrogen production by electrolysis of water. Excellent and stable OER catalysts can be developed by activating lattice oxygen and changing the reaction path. Herein, S and FeOOH on the Co(OH)2 nanoneedle arrays are introduced to construct a heterostructure (S-FeOOH/Co(OH)2/NF) as a proof of concept. Theoretical calculations and experimental suggest that the Co-O-Fe motif formed at the heterogeneous interface with the introduction of FeOOH, inducing electron transfer from Co to Fe, enhancing Co─O covalency and reducing intramolecular charge transfer energy, thereby stimulating direct intramolecular lattice oxygen coupling. Doping of S in FeOOH further accelerates electron transfer, improves lattice oxygen activity, and prevents dissolution of FeOOH. Consequently, the overpotential of S-FeOOH/Co(OH)2/NF is only 199 mV at 10 mA cm-2, and coupled with the Pt/C electrode can be up to 1 A cm-2 under 1.79 V and remain stable for over 120 h in an anion exchange membrane water electrolyzer (AEMWE). This work proposes a strategy for the design of efficient and stable electrocatalysts for industrial water electrolysis and promotes the commercialization of AEMWE.

Crystal phase-driven performance of MnO2 in aqueous phase low-temperature thermal catalysis: Synergistic interactions between Mn3+ and surface lattice oxygen.

Catalytic oxidation at mild conditions is crucial for mitigating the high pressure and high temperature challenges associated with current catalytic wet air oxidation (CWAO) technologies in wastewater treatment. Among potential materials for catalytic oxidation reactions, polycrystalline MnO2 existed in natural minerals holds considerable promise. However, the relationships between different crystal phases of MnO2 and their catalytic activity sources in aqueous phase remain uncertain and subject to debate. In this research, we synthesized various MnO2 crystal phases, comprising α-, ß-, δ-, γ-, ε-, and λ-MnO2, and assessed their catalytic oxidation efficiency during low-temperature heating for treatment of organic pollutants. Our findings demonstrate that λ-MnO2 exhibits the highest catalytic activity, followed by δ-MnO2, γ-MnO2, α-MnO2, ε-MnO2, and ß-MnO2. The variations in catalytic activity among different MnO2 are attributed to variances in their oxygen vacancy abundance and redox activity. Furthermore, we identified the primary active species, which include Mn3+ and superoxide radicals (•O2-) generated by surface lattice oxygen of MnO2. This research highlights the critical role of crystal phases in influencing oxygen vacancy content, redox activity, and overall catalytic performance, providing valuable insights for the rational design of MnO2 catalysts tailored for effective organic pollutant degradation in CWAO applications.

In Situ Surface Reaction for the Preparation of High-Performance Li-Rich Mn-Based Cathode Materials with Integrated Surface Functionalization.

Li-rich Mn-based cathode materials (LLOs) are often faced with problems such as low initial Coulombic efficiency (ICE), limited rate performance, voltage decay, and structural instability. Addressing these problems with a single approach is challenging. To overcome these limitations, we developed an LLO with surface functionalization using a simple fabrication method. This two-step process involved a liquid-stage NaBF4 treatment followed by an in situ chemical reaction during sintering. This reaction led to the creation of oxygen vacancies (OV), spinel structures, and doping with Na at the Li site, B at the tetrahedral interstitial spaces of O in both the transition-metal (TM) layer and Li layers as well as the octahedral interstices in the TM layer, and F at the O site. We have carried out a thorough study and employed density functional theory calculations to reveal the hidden mechanisms. The treatment not only increases the electrical conductivity but also changes the oxygen charge environment and inhibits lattice oxygen activity. Surprisingly, the B-O bond is so strong that it prevents the migration of TM within the tetrahedral interstitial spaces of O in both the TM and Li layers, hence stabilizing its structure. This bonding interaction strengthens the transition of the TM 3d and O 2p states to lower energy levels, thus causing an increase in the redox potentials. Hence, a rise in the operating voltage occurs. Of special importance, this therapy dramatically increases the ICE to 90.29% and keeps a specified capacity of 203.3 mAh/g after 100 cycles at 1C, which is an excellent capacity retention of 89.94%. This study introduces ideas and methods to tackle the challenges associated with LLOs in batteries. It also provides compelling evidence for the development of high-energy-density Li-ion batteries.

Lattice Oxygen in Photocatalytic Gas-Solid Reactions: Participator vs. Dominator.

Lattice-oxygen activation has emerged as a popular strategy for optimizing the performance and selectivity of oxide-based thermocatalysis and electrolysis. However, the significance of lattice oxygen in oxide photocatalysts has been ignored, particularly in gas-solid reactions. Here, using methane oxidation over a Ru1@ZnO single-atom photocatalyst as the prototypical reaction and via 18O isotope labelling techniques, we found that lattice oxygen can directly participate in gas-solid reactions. Lattice oxygen played a dominant role in the photocatalytic reaction, as determined by estimating the kinetic constants in the initial stage. Furthermore, we discovered that dynamic diffusion between O2 and lattice oxygen proceeded even in the absence of targeted reactants. Finally, single-atom Ru can facilitate the activation of adsorbed O2 and the subsequent regeneration of consumed lattice oxygen, thus ensuring high catalyst activity and stability. The results provide guidance for next-generation oxide photocatalysts with improved activities and selectivities.

A Unique Wide-Spacing Fence-Type Superstructure for Robust High-Voltage O3-Type Sodium Layered Cathode.

Enhancing the energy density of layered oxide cathode materials is of great significance for realizing high-performance sodium-ion batteries and promoting their commercial application. Lattice oxygen redox at high voltage usually enables a high capacity and energy density. But the structural degradation, severe voltage decay, and the resultant poor cycling performance caused by irreversible oxygen release seriously restrict the practical application. Herein we introduce a novel fence-type superstructure (2a×3a type supercell) into O3-type layered cathode material Na0.9Li0.1Ni0.3Mn0.3Ti0.3O2 and achieve a stable cycling performance at a high voltage of 4.4 V. The fence-type superstructure effectively inhibits the formation of the vacancy clusters resulting from out-of-plane Li migration and in-plane transition metal migration at high voltage due to the wide d-spacing, thereby significantly reducing the irreversible release of lattice oxygen and greatly stabilizing the crystal structure. The cathode exhibits a high energy density of 545 Wh kg-1, a high rate capability (112.8 mAh g-1 at 5 C) and a high cycling stability (85.8 %@200 cycles with a high initial capacity of 148.6 mAh g-1 at 1 C) accompanied by negligible voltage attenuation (98.5 %@200 cycles). This strategy provides a distinct spacing effect of superstructure to design stable high-voltage layered cathode materials for Na-ion batteries.

Achieving a Deeply Desodiated Stabilized Cathode Material by the High Entropy Strategy for Sodium-ion Batteries.

Manganese-based layered oxides are currently of significant interest as cathode materials for sodium-ion batteries due to their low toxicity and high specific capacity. However, the practical applications are impeded by sluggish intrinsic Na+ migration and poor structure stability as a result of Jahn-Teller distortion and complicated phase transition. In this study, a high-entropy strategy is proposed to enhance the high-voltage capacity and cycling stability. The designed P2-Na0.67Mn0.6Cu0.08Ni0.09Fe0.18Ti0.05O2 achieves a deeply desodiation and delivers charging capacity of 158.1 mAh g-1 corresponding to 0.61 Na with a high initial Coulombic efficiency of 98.2 %. The charge compensation is attributed to the cationic and anionic redox reactions conjunctively. Moreover, the crystal structure is effectively stabilized, leading to a slight variation of lattice parameters. This research carries implications for the expedited development of low-cost, high-energy-density cathode materials for sodium-ion batteries.

Lattice Oxygen Activation through Deep Oxidation of Co4N by Jahn-Teller-Active Dopants for Improved Electrocatalytic Oxygen Evolution.

Triggering the lattice oxygen oxidation mechanism is crucial for improving oxygen evolution reaction (OER) performance, because it could bypass the scaling relation limitation associated with the conventional adsorbate evolution mechanism through the direct formation of oxygen-oxygen bond. High-valence transition metal sites are favorable for activating the lattice oxygen, but the deep oxidation of pre-catalysts suffers from a high thermodynamic barrier. Here, taking advantage of the Jahn-Teller (J-T) distortion induced structural instability, we incorporate high-spin Mn3+ ( t 2 g 3 e g 1 ${{t}_{2g}^{3}{e}_{g}^{1}}$ ) dopant into Co4N. Mn dopants enable a surface structural transformation from Co4N to CoOOH, and finally to CoO2, as observed by various in situ spectroscopic investigations. Furthermore, the reconstructed surface on Mn-doped Co4N triggers the lattice oxygen activation, as evidenced experimentally by pH-dependent OER, tetramethylammonium cation adsorption and online electrochemical mass spectrometry measurements of 18O-labelled catalysts. In general, this work not only offers the introducing J-T effect approach to regulate the structural transition, but also provides an understanding about the influence of the catalyst's electronic configuration on determining the reaction route, which may inspire the design of more efficient catalysts with activated lattice oxygen.

Regulating the mobility of lattice oxygen on hollow cobalt-manganese sub-nanospheres for enhanced catalytic oxidation of toluene and o-xylene.

Promoting lattice oxygen mobility of Co-based catalysts is crucial to making progress in catalytic oxidation technology. The addition of manganese, a transition metal with similar ionic radius to cobalt and variable valence, was supposed to enhance the mobility of lattice oxygen species of Co-based oxide. A range of hollow CoMnaOx sub-nanosphere catalysts with different Mn/Co ratios was synthesized via a template-sacrificed method, and the effects of different Mn/Co ratios on the structural properties of the catalysts and their catalytic performance for benzene series volatile organic compounds (VOCs) oxidation were investigated. Hollow CoMn2Ox sub-nanosphere exhibited good catalytic activity for oxidation of toluene (T90 = 265 °C) and o-xylene (T90 = 297 °C), as well as excellent recycling ability and water resistance. By adjusting the Mn/Co ratio, metal ions enter into the different tetrahedral or octahedral active sites. Compared with Co3O4, the desorption temperature of surface lattice oxygen on CoMn2Ox decreased by 110 °C. These results demonstrate that the addition of manganese can encourage the electron transfer on CoMnaOx, indicating that the introduction of the appropriate amount of manganese accelerates the activation of gas O2 and mobility of surface lattice oxygen species, thereby expediting the oxidation of benzene series VOCs.

A Low-Noble-Metal Ru@CoMn2O4 Spinel Catalyst for the Efficient Oxidation of Propane.

Noble metals have become a research hotspot for the oxidation of light alkanes due to their low ignition temperature and easy activation of C-H; however, sintering and a high price limit their industrial applications. The preparation of effective and low-noble-metal catalysts still presents profound challenges. Herein, we describe how a Ru@CoMn2O4 spinel catalyst was synthesized via Ru in situ doping to promote the activity of propane oxidation. Ru@CoMn2O4 exhibited much higher catalytic activity than CoMn2O4, achieving 90% propane conversion at 217 °C. H2-TPR, O2-TPD, and XPS were used to evaluate the catalyst adsorption/lattice oxygen activity and the adsorption and catalytic oxidation capacity of propane. It could be concluded that Ru promoted synergistic interactions between cobalt and manganese, leading to electron transfer from the highly electronegative Ru to Co2+ and Mn3+. Compared with CoMn2O4, 0.1% Ru@CoMn2O4, with a higher quantity of lattice oxygen and oxygen mobility, possessed a stronger capability of reducibility, which was the main reason for the significant increase in the activity of Ru@CoMn2O4. In addition, intermediates of the reaction between adsorbed propane and lattice oxygen on the catalyst were monitored by in situ DRIFTS. This work highlights a new strategy for the design of a low-noble-metal catalyst for the efficient oxidation of propane.

Balance between FeIV-NiIV synergy and Lattice Oxygen Contribution for Accelerating Water Oxidation.

Hydrogen obtained from electrochemical water splitting is the most promising clean energy carrier, which is hindered by the sluggish kinetics of the oxygen evolution reaction (OER). Thus, the development of an efficient OER electrocatalyst using nonprecious 3d transition elements is desirable. Multielement synergistic effect and lattice oxygen oxidation are two well-known mechanisms to enhance the OER activity of catalysts. The latter is generally related to the high valence state of 3d transition elements leading to structural destabilization under the OER condition. We have found that Al doping in nanosheet Ni-Fe hydroxide exhibits 2-fold advantage: (1) a strong enhanced OER activity from 277 mV to 238 mV at 10 mA cm-2 as the Ni valence state increases from Ni3.58+ to Ni3.79+ observed from in situ X-ray absorption spectra. (2) Operational stability is strengthened, while weakness is expected since the increased NiIV content with 3d8L2 (L denotes O 2p hole) would lead to structural instability. This contradiction is attributed to a reduced lattice oxygen contribution to the OER upon Al doping, as verified through in situ Raman spectroscopy, while the enhanced OER activity is interpreted as an enormous gain in exchange energy of FeIV-NiIV, facilitated by their intersite hopping. This study reveals a mechanism of Fe-Ni synergy effect to enhance OER activity and simultaneously to strengthen operational stability by suppressing the contribution of lattice oxygen.

Shifting the Oxygen-Evolution Reaction Pathway via Cation Engineering to Activate Lattice Oxygen in Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) as promising electrocatalysts have been widely studied, but their performance is limited by conductivity and coordinating saturation. This study proposes a cationic (V) modification strategy and evaluates its effect on the electrocatalytic performance of CoFe-MOF nanosheet arrays. The optimal V-CoFe-MOF/NF electrocatalyst exhibits excellent oxygen-evolution reaction (OER)/hydrogen-evolution reaction (HER) performance (231 mV at 100 mA cm-2/86 mV at 10 mA cm-2) in alkaline conditions, with its OER durability exceeding 400 h without evident degradation. Furthermore, as a bifunctional electrocatalyst for water splitting, a small cell voltage is achieved (1.60 V at 10 mA cm-2). The practicability of the catalyst is further evaluated by membrane electrode assembly (MEA), showing outstanding activity (1.53 V at 10 mA cm-2) and long-term stability (at 300 mA cm-2). Moreover, our results reveal the apparent reconstruction properties of V-CoFe-MOF/NF in alkaline electrolytes, where the partially dissolved V promotes the formation of more active ß-MOOH. The mechanism study shows the OER mechanism shifts to a lattice oxygen oxidation mechanism (LOM) after V doping, which directly avoids complex multistep adsorption mechanism and reduces reaction energy. This study provides a cation mediated strategy for designing efficient electrocatalysts.

Stabilization of Lattice Oxygen Evolution Reactions in Oxophilic Ce-Mediated Bi/BiCeO1.8H Electrocatalysts for Efficient Anion Exchange Membrane Water Electrolyzers.

The lattice oxygen mechanism (LOM) offers an efficient reaction pathway for oxygen evolution reactions (OERs) in energy storage and conversion systems. Owing to the involvement of active lattice oxygen enhancing electrochemical activity, addressing the structural and electrochemical stabilities of LOM materials is crucial. Herein, a heterostructure (Bi/BiCeO1.8H) containing abundant under-coordinated oxygen atoms having oxygen nonbonding states is synthesized by a simple electrochemical deposition method. Given the difference in reduction potentials between Bi and Ce, partially reduced Bi nanoparticles and surrounding under-coordinated oxygen atoms are generated in BiCeO1.8H. It is found that the lattice oxygen can be activated as a reactant of the OER when the valence state of Bi increases to Bi5+, leading to increased metal-oxygen covalency and that the oxophilic Ce3+/4+ redox couple can maintain the Bi nanoparticles and surrounding under-coordinated oxygen atoms by preventing over-oxidation of Bi. The anion exchange membrane water electrolyzer with Bi/BiCeO1.8H exhibits a low cell voltage of 1.79 V even at a high practical current density of 1.0 A cm-2. Furthermore, the cell performance remains significantly stable over 100 h with only a 2.2% increase in the initial cell voltage, demonstrating sustainable lattice oxygen redox.

Cobalt-Modified Black Phosphorus Nanosheets-Enabled Ferrate (VI) Activation for Efficient Chemiluminescence Detection of Thiabendazole.

The development of chemiluminescence-based innovation sensing systems and the construction of a sensing mechanism to improve the analytical performance of compounds remain a great challenge. Herein, we fabricated an advanced oxidation processes pretreated chemiluminescence (AOP-CL) sensing system via the introduction of cobalt-modified black phosphorus nanosheets (Co@BPNs) to achieve higher efficient thiabendazole (TBZ) detection. Co@BPNs, enriched with lattice oxygen, exhibited a superior catalytic performance for accelerating the decomposition of ferrate (VI). This Co@BPNs-based ferrate (VI) AOP system demonstrated a unique ability to selectively decompose TBZ, resulting in a strong CL emission. On this basis, a highly selective and sensitive CL sensing platform for TBZ was established, which exhibited strong resistance to common ions and pesticides interference. This was successfully applied to detecting TBZ in environmental samples such as tea and kiwi fruits. Besides, the TBZ detection mechanism was explored, Co@BPNs-based ferrate (VI) AOP system produced a high yield of ROS (mainly 1O2), which oxidized the thiazole-based structure of TBZ, generating chemical energy that was transferred to Co@BPNs via a chemical electron exchange luminescence (CIEEL) mechanism, leading to intense CL emission. Notably, this study not only proposed an innovative approach to enhance the chemical activity and CL properties of nanomaterials but also offered a new pathway for designing efficient CL probes for pollutant monitoring in complex samples.