Mandible development under gestational protein restriction: cellular and molecular mechanisms.

Insufficient evidence regarding how maternal undernutrition affects craniofacial bone development persists. With its unique focus on the impact of gestational protein restriction on calvaria and mandible osteogenesis, this study aims to fill, at least in part, this gap. Female mice were mated and randomized into NP (normal protein) or LP (low protein) groups. On the 18th gestational day (GD), male embryos were collected and submitted to microtomography (µCT), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), PCR, and autophagy dynamic analyses. The study shows that the LP offspring exhibited lower body mass than the NP group, with µCT analysis revealing no volumetric differences in fetus's head. EDS analysis showed lower calcium and higher phosphorus percentages in mandibles and calvaria. SEM assessment evidenced higher hydroxyapatite crystal-like (HC) deposition on the calvaria surface in LP fetus. Conversely, lower HC deposition was observed on the mandible surface, suggesting delayed matrix mineralization in LP fetuses with a higher percentage of collagen fibers in the mandible bone. The autophagy process was reduced in the mesenchyme of LP fetuses. PCR array analysis of 84 genes revealed 27 genes with differential expression in the LP progeny-moreover, increased mRNA levels of Akt1, Mtor, Nfkb, and Smad1 in the LP offspring. In conclusion, the results suggest that gestational protein restriction anticipated bone differentiation in utero, before 18GD, where this process is reduced compared to the control, leading to the reduction in bone area at 15 postnatal day previously observed. These findings provide insights into the molecular and cellular mechanisms of mandible development and suggest potential implications for the Developmental Origins of Health and Disease (DOHaD).

Immediate functional loading of implant-supported mandibular prostheses with customized UCLA'S attachments with distal extension: A case report.

Implant-supported complete dentures are a common procedure for patients with mandibular edentulism problems. This article documents the protocol for immediate functional loading of fixed transient mandibular prostheses with fully moldable attachments and distal extensions to prevent fractures. A 56-year-old female patient was referred to the Oral Rehabilitation and Implantology Service due to periodontal problems, difficulty in chewing capacity and aesthetic compromise. The patient was treated in a single surgical procedure with dental extractions, guided regularization of the alveolar process and guided placement of five interforaminal implants and placement of functional fixed mandibular prostheses with immediate loading with personalized UCLA'S, distal extensions and short arc occlusal scheme. At 3 months postoperatively, the definitive placement of fixed mandibular metal acrylic prostheses and conventional upper prostheses was performed. The functional and aesthetic integrity of the fixed mandibular prosthesis implant preserved with UCLA'S documents that implant placement in the interforaminal zone with an immediate loading protocol is a viable treatment option for prosthetic rehabilitation of the fully edentulous mandibular arch and that design with distal extensions in the posterior sector of the mandibular arch is an effective option to avoid fracture of the prostheses, presenting a survival of the five mandibular implants of 100% at 1 year postoperatively.

Importance of local and systemic factors in preventing implant displacement in the mandibular body: a scoping review of existing literature.

BACKGROUND: The aim of this research was to analyse the current literature on displaced dental implants in the mandibular body, including local and systemic variables related to their cause, and to identify the most frequent location. METHODS: The study conducted a search of three databases (Pubmed, Scopus, and Web of Science) using specific index terms such as 'dental implant', 'displacement', 'dislocation', 'displaced', and 'mandible'. The analysis focused on the direction of displacement and the characteristics of the bone tissue (bone quality, density, and quantity) in cases where dental implants were displaced. RESULTS: A total of 371 articles were obtained. Thirteen of these articles were selected and read in full. To define bone quality, the Lekholm and Zarb classification, modified by Rosas et al., was used. The type II-B bone, which is characterized by thick cortical bone surrounding cancellous bone with extremely wide medullary spaces, presented the largest number of complications. Twenty-two cases were found in which the displacement direction was horizontal. Of these, four were displaced vestibularly, fourteen lingually, and four remained in the center. Additionally, 24 cases presented vertical displacement, with 12 displaced towards the inferior border of the mandible, 9 towards the middle or adjacent to the inferior dental nerve canal, and 3 above the inferior dental nerve canal. CONCLUSION: The accidental displacement of implants within the mandibular body is associated with various risk factors, including the characteristics of the bony trabeculum and the size of the medullary spaces. It is reasonable to suggest that only an adequate pre-surgical diagnostic evaluation, with the help of high-resolution tomographic images that allow a previous evaluation of these structures, will help to have better control over the other factors, thus minimizing the risk of displacement.

Examining the Impact of Acute Binge Alcohol Consumption on Trabecular Morphometry and Tensile Strength in Adolescent Sprague Dawley Rat Mandibles / Análisis del Impacto del Consumo Excesivo de Alcohol en la Morfometría Trabecular y la Resistencia a la Tracción en Mandíbulas de Ratas Adolescentes Sprague Dawley

SUMMARY: Underage drinking has become a major public concern having a negative impact on the growth and development of the skeleton. Peak bone mass is attained during adolescence hence the aim of the study was to investigate the effect of acute binge alcohol consumption on trabecular morphometry and tensile strength of the adolescent mandible in the Sprague Dawley (SD) rat. The study comprised of 24 SD rats, aged 7 weeks, placed into either the alcohol-exposed [n=12 (6 males and 6 female)] or pair-fed control group [n=12 (6 male and 6 female)]. The treatment of the groups was as follows; the alcohol exposed group and the pair-fed control were administered a single daily dose of 3 g/kg of 20 % alcohol 3 days a week (alternate days) for 7 days and a caloric equivalent dose of maltose dextrin via oral gavage, respectively. The animals were terminated on day 7 via pentobarbital injection. The mandibles were harvested and scanned using a Nikon XTH 255L 3D-microCT scanner (Nikon Metrology, Leuven, Belgium), and biomechanical tests were done using a Shimadzu universal tensile strength testing machine (China). Following scanning and reconstruction, the trabecular morphometry was assessed using Volume Graphics Studio® software. A 3-point bending test was used to evaluate the tensile strength of the bone. Findings from our study showed changes in some trabecular parameters in the female alcohol-exposed group, while the male groups remained unaffected. No changes in tensile strength were seen when comparing male pair-fed control and alcohol-exposed groups and when comparing female pair-fed control and alcohol-exposed groups. Trabecular and tensile strength differences were observed between the sexes when comparing male pair-fed control and alcohol-exposed groups to female pair-fed control and alcohol-exposed groups. These findings do suggest that acute binge alcohol consumption has detrimental effects on the bone micro-architecture in female alcohol-exposed rats and that differences are seen between the sexes.

El consumo de alcohol entre menores de edad se ha convertido en una importante preocupación pública que tiene un impacto negativo en el crecimiento y desarrollo del esqueleto. La masa ósea máxima se alcanza durante la adolescencia, por lo que el objetivo del estudio fue investigar el efecto del consumo excesivo de alcohol en forma aguda sobre la morfometría trabecular y la resistencia a la tracción de la mandíbula en ratas adolescente Sprague Dawley (SD). El estudio estuvo compuesto por 24 ratas, de 7 semanas de edad, colocadas en el grupo control expuesto al alcohol [n=12 (6 machos y 6 hembras)] y alimentado en parejas [n=12 (6 machos y 6 hembras)]. El tratamiento de los grupos fue el siguiente; al grupo expuesto al alcohol y al control alimentado en parejas se les administró una dosis única diaria de 3 g/kg de alcohol al 20 % 3 días a la semana (días alternos) durante 7 días y una dosis equivalente calórica de maltosa dextrina mediante sonda oral, respectivamente. Los animales fueron sacrificados el día 7 mediante inyección de pentobarbital. Las mandíbulas se recolectaron y se escanearon utilizando un escáner 3D-microCT Nikon XTH 255L (Nikon Metrology, Lovaina, Bélgica), y las pruebas biomecánicas se realizaron utilizando una máquina de prueba de resistencia a la tracción universal Shimadzu (China). Después del escaneo y la reconstrucción, la morfometría trabecular se evaluó utilizando el software Volume Graphics Studio®. Se utilizó una prueba de flexión de 3 puntos para evaluar la resistencia a la tracción del hueso. Los hallazgos de nuestro estudio mostraron cambios en algunos parámetros trabeculares en el grupo de hembras expuestas al alcohol, mientras que los grupos de machos no se vieron afectados. No se observaron cambios en la resistencia a la tracción al comparar los grupos control de machos alimentados en parejas y los grupos expuestos al alcohol y al comparar los grupos control de las hembras alimentadas en parejas y los grupos expuestos al alcohol. Se observaron diferencias trabeculares y de resistencia a la tracción entre los sexos al comparar los grupos control de los machos alimentados en parejas y expuestos al alcohol con los grupos de control de hembras alimentadas en parejas y expuestas al alcohol. Estos hallazgos sugieren que el consumo excesivo de alcohol tiene efectos perjudiciales sobre la microarquitectura ósea en ratas hembras expuestas al alcohol y que se observan diferencias entre los sexos.

Digital Implant-Supported Restoration Planning Placed in Autologous Graft Using Titanium Implants Produced by Additive Manufacturing.

This clinical report presents a technique to reconstruct extensively resected mandibles using a combination of autologous bone grafts and additive manufacturing techniques. Mandibular defects, often arising from trauma, tumors, or congenital anomalies, can severely impact both function and aesthetics. Conventional reconstruction methods have their limitations, often resulting in suboptimal outcomes. In these reports, we detail clinical cases where patients with different mandibular defects underwent reconstructive surgery. In each instance, autologous grafts were harvested to ensure the restoration of native bone tissue, while advanced virtual planning techniques were employed for precise graft design and dental implant placement. The patients experienced substantial improvements in masticatory function, speech, and facial aesthetics. Utilizing autologous grafts minimized the risk of rejection and complications associated with foreign materials. The integration of virtual planning precision allowed customized solutions, reducing surgical duration and optimizing implant positioning. These 2 cases underscores the potential of combining autologous grafts with virtual planning precision and dental implants produced by additive manufacturing for mandible reconstruction.

[Bilateral hyperplasia of the coronoid process in an adolescent patient. case report]. / Hiperplasia bilateral de la apófisis coronoides en paciente adolescente. reporte de caso.

Hyperplasia of the coronoid process is a rare alteration that is characterized by the exaggerated and progressive development of said process over periods of months or years, both in height and volume, which finally causes mandibular hypomobility. It is important to highlight the importance of imaging for the correct diagnosis and treatment of said entity, taking into consideration the great variety of differential diagnoses that can occur. In this sense, conventional radiographs constitute a basic and indispensable tool for approaching the diagnosis. However, it is actually the CT scan that offers the greatest precision. The case of a 14-year-old male patient is presented, with no contributing medical history, who was referred for presenting progressive opening limitation since childhood, for which, after clinical and imaging evaluation, he was treated with total bilateral coronoidectomy, postoperative follow-up was performed. for a year in which recurrence of said entity could be observed. This case demonstrates the importance of correct diagnosis, as well as postoperative control and the rehabilitation scheme carried out by the patient.

A finite element study on the risk of bone loss around posterior short implants in an atrophic mandible.

PURPOSE: This study aimed to evaluate the risk of bone loss around single short molar crown-supporting implants in an atrophic mandible. METHODS: Implants of different lengths (L = 4 or 6 mm) and diameters (Ø = 4.1 or 4.8 mm) were placed in the molar area of an atrophic mandible. Additional control mandible models were simulated for 4.1 mm diameter implants (L = 4, 6, 8, and 10 mm). A vertical masticatory load of 200 N was applied to three or six occlusal contact areas (3ca or 6ca) of the prosthetic crown. The bone strain energy density (SED) of 109.6 µJ/mm3 was assumed to be the pathological threshold for cortical bone. The peri-implant bone resorption risk index (PIBRri) was calculated by dividing the maximum SED of the crestal cortical bone by the SED pathological threshold. RESULTS: Increasing the implant length from 4 to 6 mm, implant diameter from 4.1 to 4.8 mm, and number of contact areas from 3 to 6 reduced the SED and PIBRri values by approximately 20%, 35%, and 40%, respectively, when comparing pairs of models that isolated a specific variable. All models with 6ca had a low bone resorption risk (PIBRri<0.8), while the Ø4.1 short implant with 3ca had a medium (0.8≤PIBRri≤1.0) or high (PIBRri>1.0) resorption risk. CONCLUSIONS: Increasing the diameter or occlusal contact area of a 4 mm short implant in an atrophic mandible resulted in reduced bone resorption risks, similar to or lower than those observed in a regular mandible with standard-length implants.

Comparative osteology of the skull of cowbirds (Icteridae: Molothrus).

Detailed osteological descriptions of the craniomandibular complex of passerine birds are lacking for most species, limiting our understanding of their diversity and evolution. Cowbirds (genus Molothrus) are a small but widespread group of New World nine-primaried songbirds, well-known for their unique brooding parasitic behavior. However, detailed osteological data for cowbirds and other Icteridae are currently scarce and several features of their skulls remain undescribed or poorly known. To address this issue, a detailed comparative osteology of cowbird skulls is presented here for the first time based on data from x-ray microcomputed tomography, dry skeletal data, and multivariate analyses of linear morphometric data. Cowbird skulls offer some functional insights, with many finch-like features probably related to a seed-rich diet that distinguishes them from most other icterids. In addition, features previously overlooked in earlier studies might provide valuable phylogenetic information at different levels of passerine phylogeny (Passerida, Emberizoidea, Icteridae, and Agelaiinae), including some of the otic region and nasal septum. Comparisons among cowbirds show that there is substantial cranial variation within the genus, with M. oryzivorus being the most divergent cowbird species. Within the genus, distantly related species share similar overall skull morphology and proportions, but detailed osteological data allow species identification even in cases of strong convergence. Further efforts are warranted to furnish baseline data for future studies of this iconic group of Neotropical birds and to fully integrate it into phylogenetic comparative frameworks.

Bifurcation of the mandibular canal according to sex, age, and facial skeletal pattern: a morphological and morphometric study of cone beam computed tomography.

PURPOSE: To assess the presence of mandibular canal bifurcation (BMC) and classify these variations by correlating findings with sex, age and facial skeletal pattern, measurements were made, including height, width, and distance from bifurcation to anatomical cortical bones. METHODS: BMC was identified in cone beam CT exams of 301 patients and classified according to its origin, location, direction, configuration and ending. The height and width of the MC before and after the bifurcation; height and width of the BMC; and distance from BMC to alveolar (C1), buccal (C2), lingual (C3) and basal (C4) bone cortices were measured. All data were correlated with sex, age, and facial skeletal pattern (class I, II, III). The significance level was 5%. RESULTS: 67 BMC (22.26%) were identified in 55 patients (18.28%). Bifurcations were more prevalent in females (p = 0.57), aged 18-39 years (p = 0.40), class I (p = 0.77). Single bifurcations, located in the posterior region of the mandible, originating in the MC, with a superior direction and ending in the retromolar foramen were more prevalent (p > 0.05). Mean cortical measurements were higher in male individuals, with significant differences only at C1 (p = 0.03). The mean height and width of BMC were 2.24 (± 0.62) and 1.75 (± 0.45) mm. There was no association between BMC classification and the variables studied (p > 0.05). CONCLUSION: Approximately 1/5 of the population studied had BMC. There were no associations of BMC presence or characteristics with sex, age, and facial skeletal pattern. The distance from bifurcation to alveolar (superior) cortical bone is greater in male individuals.

Measurement of the mandibular canal and mandibular incisive canal using cone beam tomography in adults from South Brazil.

PURPOSE: To identify and measure the distance from the dental apices to the mandibular (MC) and mandibular incisive (MIC) canals, the diameter of the MC and the distances of the mental foramen (MF). METHODS: In this retrospective study, cone-beam computed tomography scans of 144 adult patients (males and females) from a dental school in South Brazil were evaluated. Cross-sections were selected on the MC and the MIC paths, perpendicular to the mandibular base, and measurements were taken from the dental apices to the mandibular cortices. The measurement and location of the mandibular and mental foramen on both sides were compared. Paired t-tests compared sides, while Student's t-tests compared sexes (P < 0.05). RESULTS: The distance from the dental apices to the upper wall of the MC was closest in the third molar and farthest in the central incisor region. In both sexes and sides, the path of the MC is in most cases lingually in the molar regions and moves to the buccal region from the second premolar. The MF emerges in the regions between the premolars or near the second premolar. CONCLUSION: The results of this study highlight the importance of evaluating specific individual characteristics of a given population.

Effect of a Dose-Dependent Administration of Binge Alcohol on the Mandible in the Adolescent Sprague Dawley Rat / Efecto de una Administración Dosis-Dependiente de Alcohol en Exceso en la Mandíbula de la Rata Sprague Dawley Adolescente

SUMMARY: Binge drinking in adolescents has a negative effect on the developing skeleton and the attainment of peak bone mass. Our study aimed to examine the effect of binge drinking on the growth and functional integrity of the adolescent Sprague Dawley rat mandible and to determine if a dosage of 1.5 g/kg is sufficient to produce a binge-model of consumption. A total of eight 7-week-old adolescent (male) Sprague Dawley rats were randomly placed into 4 groups with two rats each: 1-week alcohol-exposed rats, 1-week pair- fed control rats, 4-week alcohol-exposed rats and 4-week pair-fed control rats. The alcohol exposed groups were administered a single daily dose via oral gavage of 1.5 g/kg of 20 % alcohol 3 days a week (alternate days) for 7 or 28 days. The pair-fed control groups were administered a caloric equivalent dose of maltose dextrin via oral gavage on the same days as the alcohol-exposed rats. The one-week alcohol exposed, and control rats were terminated on day 7 and the four-week alcohol exposed and control rats on day 28. The mandibles were dissected out and osteometric measurements determined using a digital vernier caliper. Bones were scanned using a 3D-microCT scanner (Nikon XTH 255L). Biomechanical tests were done using a Shimadzu universal testing machine. Differences observed were regarding mandibular osteometry, which showed a reduced height in the central portion of the alveolar bone (Al'-Me), and an increase in the height of the condylar head (Cd-Ag) in the 1-week alcohol-exposed rats when compared to the 1-week pair-fed control rats. No other differences were noted. Lack of significant changes seen between the alcohol and pair-fed control groups in both acute binge and chronic binge exposed rats is likely due to the low dose of alcohol administered to the rats in the study thus a higher dose is proposed.

El consumo excesivo de alcohol en adolescentes tiene un efecto negativo en el desarrollo del esqueleto y en la consecución de la masa ósea máxima. Nuestro estudio tuvo como objetivo examinar el efecto del consumo excesivo de alcohol sobre el crecimiento y la integridad funcional de la mandíbula de la rata adolescente Sprague Dawley y determinar si una dosis de 1,5 g/kg es suficiente para producir un modelo de consumo compulsivo. Un total de ocho ratas Sprague Dawley adolescentes (machos) de 7 semanas de edad se colocaron aleatoriamente en 4 grupos con dos ratas cada uno: ratas expuestas al alcohol durante 1 semana, ratas de control alimentadas en parejas durante 1 semana, ratas expuestas al alcohol durante 4 semanas, y ratas de control alimentadas en parejas durante 4 semanas. A los grupos expuestos al alcohol se les administró una dosis única diaria mediante sonda oral de 1,5 g/kg de alcohol al 20 % 3 días a la semana (días alternos) durante 7 o 28 días. A los grupos de control alimentados por parejas se les administró una dosis calórica equivalente de maltosa dextrina mediante sonda oral los mismos días que a las ratas expuestas al alcohol. Las ratas expuestas al alcohol durante una semana, las ratas de control al día 7, las ratas expuestas al alcohol durante cuatro semanas y las ratas de control al día 28. Se diseccionaron las mandíbulas y se determinaron las mediciones osteométricas utilizando un calibre vernier digital. Los huesos se escanearon utilizando un escáner 3D-microCT (Nikon XTH 255L). Las pruebas biomecánicas se realizaron utilizando una máquina de pruebas universal Shimadzu. Las diferencias observadas se relacionaron con la osteometría mandibular, que mostró una altura reducida en la porción central del hueso alveolar (Al'-Me) y un aumento en la altura de la cabeza condilar (Cd-Ag) en las ratas expuestas al alcohol durante una semana, en comparación con las ratas control alimentadas en parejas durante una semana. No se observaron otras diferencias. La falta de diferencias significativas entre los grupos de alcohol y de control alimentados en parejas expuestas a ebriedad aguda y ebriedad crónica, probablemente se deba a la baja dosis de alcohol administrada a las ratas en el estudio, por lo que se propone una dosis más alta.

Morphological Assessment of the Anterior Loop in the Region of Mental Foramen Using Cone Beam Computed Tomography / Evaluación Morfológica del Asa Anterior en la Región del Foramen Mentoniano Mediante Tomografía Computarizada de Haz Cónico

SUMMARY: Anterior loop in the mental foramen region is a critical region in the mandible. The non detection of anterior loop leads to inadvertent complications during the surgical procedures in this region. This study aimed to evaluate the morphological assessment of the mental foramen's anterior loop (AL) using (CBCT) cone-beam computed tomography. CBCT data was retrieved from January 2018 to December 2022 and screened for eligibility. Images were viewed using panoramic reconstructed views for initial screening. Further multiplanar reformatted view in axial, coronal and sagittal planes were examined. When anterior loop was detected, the path of inferior alveolar canal was traced and the anterior loop was analyzed. Statistical analysis was carried out on the data. Cross-tabulation was done to associate gender and age with the achieved findings (heights and diameters) using the Chi-square test. In this analysis 519 cases were included and examined for presence of anterior loop. 22 cases were included in the study, out of which 10(45.5%) males and 12(54.5%) females. The prevalence of AL is high among females. AL was found higher on the right side in 14 (68.2%) cases compared to the left side with 7 (31.8%) cases. The mean diameter of AL on the right side was 2.5 mm, and on the left side diameter was 1.96 mm. The prevalence of anterior loop in the region of mental foramen in Saudi Population was found to be 4.24%. Careful evaluation for the anterior loop can prevent hemorrhagic episodes during surgical intervention or implant procedures in the mandibular premolar region.

El asa anterior en la región del foramen mentoniano es una región crítica en la mandíbula. La no detección del asa anterior conduce a complicaciones inadvertidas durante los procedimientos quirúrgicos en esta región. Este estudio tuvo como objetivo evaluar la evaluación morfológica del asa anterior (AL) del foramen mental mediante tomografía computarizada de haz cónico (CBCT). Los datos CBCT se recuperaron desde enero de 2018 hasta diciembre de 2022 y se examinaron para determinar su elegibilidad. Las imágenes se visualizaron utilizando vistas panorámicas reconstruidas para la evaluación inicial. Se examinaron además, vistas reformateadas multiplanares en los planos axial, coronal y sagital. Cuando se detectó el asa anterior, se trazó el trayecto del canal mandibular y se analizó el asa anterior. Se realizó un análisis estadístico de los datos. Mediante la prueba de Chi-cuadrado se realizó una tabulación cruzada para asociar el sexo y la edad con los hallazgos obtenidos (alturas y diámetros). En este análisis se incluyeron y examinaron 519 casos para detectar la presencia de asa anterior. Se incluyeron en el estudio 22 casos, de los cuales 10 (45,5 %) eran hombres y 12 (54,5 %) mujeres. La prevalencia de AL es alta entre las mujeres. Se observó que AL fue mayor en el lado derecho en 14 (68,2 %) de los casos en comparación con el lado izquierdo con 7 (31,8 %) casos. El diámetro medio de AL en el lado derecho fue de 2,5 mm y en el lado izquierdo fue de 1,96 mm. La prevalencia del asa anterior en la región del foramen mental en la población saudí fue de 4,24 %. Una evaluación rigurosa del asa anterior puede prevenir episodios hemorrágicos durante una intervención quirúrgica o procedimientos de implante en la región de los premolares mandibulares.

Are computed tomography images of the mandible useful in age and sex determination? A forensic science meta-analysis.

OBJECTIVES: This meta-analysis addresses the use of mandibular computed tomography (CT) scans for age and/or sex determination in forensic science. METHODS: Six databases were searched until June 2023, using the keyword "mandible" combined with keywords related to "multislice computed tomography" (MCT) or "cone-beam computed tomography" (CBCT) and keywords related to "skeletal age determination" or "sex determination analysis." MAIN RESULTS: Among the 23 studies included, 11 used MCT and 12 used CBCT to perform forensic assessments. Age determination was the aim of a single study, sex and agedeterminations were the objective of five studies, and the other studies investigated the determination of sex only. Metaanalysis could be performed only for sex determination. CONCLUSIONS: Mandible measurements are useful in sex determination, as the bicondylar and bigonial breadth are larger in males than in females. For the mandible angle, the meta-analysis results confirm sex dimorphism in CBCT scans but not in MCT scans. For age estimation, further studies are needed to prove that the mandible hole is a reliable parameter for age estimation. PROSPERO registration number: CRD42021260967.

Effectiveness of commercially available denture adhesives on retention of mandibular complete denture in resorbed mandibular ridge: an in vitro study / Efectividad de los adhesivos disponibles comercialmente sobre la retención de prótesis removibles completas mandibulares en el reborde mandibular reabsorbido: un estudio in vitro

Background: Denture adhesives are alternatives used to improve retention, stability, comfort and satisfaction in patients with complete dentures. Evidence on the effectiveness of denture adhesives on resorbed mandibular ridges is scarce. Among the many commercially available denture adhesives, the ideal material for the severely resorbed mandibular ridge remains in dispute. Objective: The aim of this study was to evaluate the effectiveness of different quantities of four commercially available denture adhesives on the retention of mandibular complete dentures in severely resorbed ridges. Materials and Methods: A resorbed edentulous mandibular ridge model was manufactured in acrylic resin. A denture base was made and three loops were attached to it. Four commercially available denture adhesives (Fixodent, Perlie White, Fiftydent and Polident) were tested in amounts of 0.2 g, 0.4 g, 0.6 g, 0.8 g and 1.0 g. The acrylic resin model was evenly moistened with 1 ml of water and a weighted amount of adhesive material was applied to the denture base. The universal testing machine engaged the loops fixed on the denture base and applied the vertical displacement force. The maximum vertical displacement force values were recorded for each denture adhesive material at different amounts. Statistical calculation was performed using Kruskal Wallis with Bonferroni post hoc correction. Results: Statistically significant differences were observed in the mean values of the vertical displacement force for adhesive amounts of 0.2 g, 0.4 g, 0.6 g and 1.0 g (p<0.05) between the four adhesive materials tested. Statistically significant differences were observed when four denture adhesives were compared to each other in different amounts (p<0.05). Statistically significant differences were observed between different amounts for each of four denture adhesives (p<0.05). Conclusions: Among the four materials tested, Polident showed greater effectiveness at 0.6 g and 0.8 g, Fittydent at 0.6 g, 0.8 g and 1 g, Fixodent at 0.4 g and 0.6 g and Perlie White at 1 g and 0.8g quantity to resist vertical displacement. forces on the severely resorbed mandibular crest. Using an appropriate amount of denture adhesive allows for proper retention of the denture; Replacement of this adhesive is necessary once a day.

Introducción: Los adhesivos para prótesis dentales son alternativas utilizadas para mejorar la retención, la estabilidad, la comodidad y la satisfacción en los pacientes con prótesis completas. La evidencia sobre la efectividad de los adhesivos para prótesis dentales en los rebordes mandibulares reabsorbidos es escasa. Entre los muchos adhesivos para prótesis dentales disponibles comercialmente, sigue estando en disputa cuál es el material ideal para el reborde mandibular severamente reabsorbido. Objetivo: El objetivo de este estudio fue evaluar la efectividad de diferentes cantidades de cuatro adhesivos para prótesis dentales disponibles comercialmente sobre la retención de prótesis dentales completas mandibulares en reborde mandibular reabsorbido severamente. Materiales y Métodos: Se fabricó un modelo de reborde mandibular edéntulo reabsorbido en resina acrílica. Se hizo una base para la prótesis y se le colocaron tres bucles. Se probaron cuatro adhesivos para dentaduras postizas disponibles comercialmente (Fixodent, Perlie White, Fiftydent y Polident) en cantidades de 0,2 g, 0,4 g, 0,6 g, 0,8 g y 1,0 g. El modelo de resina acrílica se humedeció uniformemente con 1 ml de agua y se aplicó la cantidad correspondiente de material adhesivo sobre la base de la dentadura. La máquina de prueba universal enganchó los bucles fijados en la base de la dentadura postiza y aplicó la fuerza de desplazamiento vertical. Se registraron los valores máximos de fuerza de desplazamiento vertical para cada material adhesivo para dentaduras postizas en diferentes cantidades. El cálculo estadístico se realizó utilizando Kruskal Wallis con corrección post hoc de Bonferroni. Resultado: Se observaron diferencias estadísticamente significativas en los valores medios de la fuerza de desplazamiento vertical para cantidades de 0,2 g, 0,4 g, 0,6 g y 1,0 g (p<0,05) entre los cuatro materiales adhesivos para prótesis dentales probados. Se observaron diferencias estadísticamente significativas cuando se compararon cuatro adhesivos para prótesis dentales entre sí en diferentes cantidades (p<0,05). Se observaron diferencias estadísticamente significativas entre diferentes cantidades en los cuatro adhesivos para prótesis (p<0,05). Conclusión: De los cuatro materiales probados, Polident mostró mayor efectividad a 0,6 g y 0,8 g, Fittydent a 0,6 g, 0,8 g y 1 g, Fixodent a 0,4 g y 0,6 g y Perlie White a 1 g y 0,8 g para resistir fuerzas de desplazamiento vertical en la cresta mandibular severamente reabsorbida. El uso de una cantidad adecuada de adhesivo para dentaduras postizas permite una retención adecuada de la dentadura postiza; El reemplazo de este adhesivo es necesario una vez al día.

Mandibular Incisive Canal Morphometry: A Cone-Beam Computed Tomography Study in Jordan / Morfometría del Canal Incisivo Mandibular: Un Estudio de Tomografía Computarizada de Haz Cónico en Jordania

SUMMARY: Mandibular incisive canal (MIC) and related mental foramen (MF) and anterior loop (AL) morphometrics are important landmarks in medical and dental clinical applications. The main aim of this retrospective study to determine the morphometry of the mandibular incisive canal (MIC) in a Jordanian population and to propose a new shape-pattern classification of the MIC. In addition, MF and AL morphometrics were determined. Carestream 3D imaging software was used on 100 Cone-Beam Computed Tomography (CBCT) of a Jordanian population to determine the MF, AL and MIC morphometrics. The detection prevalence of the MIC was 96 %. The right and left MIC showed four distinct line patterns, proposed for the first time in this paper. The line-patterns were angular (L-line), straight (I-line), curved (V-line) and wavy (W-line), with a prevalence of 41 %, 19 %, 25.5 %, and 10.5 %, respectively. MF was detected in all mandibles with a round shape in 58 % of the images. The most common horizontal and vertical positions of the MF were H4 and H3 (73.5 %) and V3 and V2 (95 %), respectively. An accessory MF was detected in 14.5 % of the samples and was more prevalent in males and on the right side. AL was detected in 92.5 % of the samples and exhibited a pattern prevalence of 25.5 %, 40 % and 27 % for types I, II and III, respectively. Results revealed that asymmetry and gender differences between right and left MIC, MF, AL and AMF was seen in patient's mandibles. In conclusion, this is the first study to propose and show that Mandibular incisive canal exhibits four potential line patterns (L, I, V and W lines patterns). Gender and ethnic variations of the mandibular canal landmarks morphometrics of both right and left hemi-mandible are important to be acknowledged in learning anatomy and when planning or performing dental and medical procedures.

Las relaciones de la morfometría del canal incisivo mandibular (MCI), del foramen mentoniano (FM) y del asa anterior (AA) son hitos importantes en las aplicaciones clínicas médicas y dentales. El objetivo principal de este estudio retrospectivo fue determinar la morfometría del MCI en una población jordana y proponer una nueva clasificación de patrón de forma del MCI. Además, se determinaron la morfometría de FM y AA. Se utilizó el software de imágenes 3D Carestream en 100 tomografías computarizadas de haz cónico (CBCT) de una población jordana para determinar la morfometría de FM, MCI y AA. La prevalencia de detección de MCI fue del 96 %. El MCI derecho e izquierdo mostraron cuatro patrones de líneas distintas, propuestas por primera vez en este artículo. Los patrones de líneas fueron angulares (línea L), rectos (línea I), curvos (línea V) y ondulados (línea W), con una prevalencia del 41 %, 19 %, 25,5 % y 10,5 % respectivamente. Se detectó el FM en todas las mandíbulas y con forma redonda en el 58 % de las imágenes. Las posiciones horizontal y vertical más comunes del FM fueron H4 y H3 (73,5 %) y V3 y V2 (95 %), respectivamente. Se detectó FM accesorio en el 14,5 % de las muestras y fue más prevalente en el sexo masculino y en el lado derecho. AA se detectó en el 92,5 % de las muestras y exhibió un patrón de prevalencia del 25,5 %, 40 % y 27 % para los tipos I, II y III, respectivamente. Los resultados revelaron asimetría y diferencias en el sexo entre MCI, FM, AA derecha e izquierda en las mandíbulas de los pacientes. En conclusión, este es el primer estudio que propone y muestra que el canal incisivo mandibular exhibe cuatro patrones de líneas potenciales (patrones de líneas L, I, V y W). Es importante reconocer las variaciones étnicas y de sexo de la morfometría de los puntos de referencia del canal mandibular de la hemimandíbula derecha e izquierda al estudiar y aprender anatomía y al planificar o realizar procedimientos médicos y dentales.

Relationship between the Volume of the Upper Airways and the Mandibular Angle Analyzed in Computed Tomography Scans / Relação do Volume das Vias Aéreas Superiores com o Ângulo Mandibular Analisadas em Tomografias Computadorizadas

Several variables can influence the treatment and outcome of orthognathic surgery, one of which is the angle of the mandibular ramus. The objective of this study is to analyze the upper airways (UA) of patients prior to orthognathic surgery, using cone-beam computed tomography (CBCT) and to correlate their volume with the angle of the mandibular ramus. DICOM (Digital Image Communication in Medicine) images of a radiology clinic were used, with a survey of 124 full face CBCT scans, from 2015 to 2018, and the measurement of the total volume in mm³ through software. To obtain the values of the angle of the mandibular ramus, images obtained from medical reports were used, through morphological evaluation. The values were tabulated and subsequently statistical analysis was performed using the ANOVA test to assess the differences between the mean airway volumes (mm³) according to gender, age and mandibular ramus angle. However, the angle of the ramus did not influence the volume of the UA, but a greater average of UA volume was observed in male individuals and in individuals over 34 years of age. There is no evidence that it is possible to measure or predict the volume of the UA by evaluating the angle of the mandibular ramus. (AU)

Diversas as variáveis podem influenciar no tratamento e resultado de uma cirurgia ortognática, uma delas é o ângulo do ramo mandibular. O objetivo deste trabalho é analisar as vias aéreas superiores (VAS) de pacientes previamente à cirurgia ortognática, por meio de tomografia computadorizada de feixe cônico (TCFC) e correlacionar o seu volume com o ângulo do ramo mandibular. Foram utilizadas imagens DICOM (Comunicação de Imagens Digitais em Medicina) de uma clínica radiológica, com o levantamento de 124 exames de TCFC de face total, do ano de 2015 até 2018 e feita a mensuração do volume total em mm³ através de um software. Para a obtenção dos valores do ângulo do ramo mandibular foram utilizadas imagens obtidas através dos laudos médicos, mediante avaliação morfológica. Os valores foram tabulados e posteriormente feita a análise estatística com o teste ANOVA para avaliar as diferenças entre as médias de volume das vias aéreas (mm³) de acordo com o gênero, a idade e o ângulo do ramo mandibular. Contudo, o ângulo do ramo não influenciou no volume das VAS, mas uma maior média de volume de VAS foi observada nos indivíduos do gênero masculino e nos indivíduos acima de 34 anos. Não há evidências de que se é possível mensurar ou ter previsibilidade do volume de VAS, avaliando o ângulo do ramo mandibular. (AU)

Osteomyelitis by Microsporum canis and Staphylococcus spp. in cat (Felis catus) - case report.

BACKGROUND: Staphylococcus spp and Microsporum canis are zoonotic microorganisms which can cause infections and systemic diseases. The bone infection is usually caused by invasion of pathogen through the hematologic route. Mixed osteomyelitis caused by bacteria and fungi is rare, and to date, there have been no reports of mixed osteomyelitis with Staphylococcus spp. and Microsporum canis. CASE PRESENTATION: This essay reports an atypical presentation of mixed osteomyelitis (Staphylococcus spp. and Microsporum canis) in a domestic cat. A 15-month-old female Persian cat was presented to a veterinary service; the main complaint was the appearance of a nodule in the mandibular ventral rostral region. A radiographic exam performed on the animal showed proliferative and osteolytic bone lesions. The patient was submitted to a biopsy for histopathological evaluation, along with bacterial and fungal cultures. Results showed mixed osteomyelitis by Staphylococcus spp. and Microsporum canis. Microbial Sensitivity Test was performed to choose a more suitable treatment. Two surgical procedures were executed to resect and curette the lesion, and treatments with anti-inflammatory, antibiotic, and antifungal drugs were established, showing a positive clinical evolution. After 8 months of treatment, the patient's owner moved to a different city, and the animal was seen by other veterinarians, who followed along with the same treatment. However, due to complications and a diminishing quality of life over 4 years of diagnosis, the patient was euthanized. CONCLUSION: Given the above, mixed osteomyelitis is difficult to treat and can cause losses of life quality resulting death, especially in infections where M. canis is the agent causing the disease. Bacterial osteomyelitis is more frequently reported. But the lack of investigation of microorganisms other than bacteria, such as fungal cases, may imply in underdiagnosed cases. Treatment of osteomyelitis can be difficult considering the difficulties in isolating the pathological agent, resistance to the drug used, prolonged treatment time, and cost.

The median lingual foramen in the era of orthognathic virtual surgical planning.

The median lingual foramen (MLF), which contains neurovascular bundles, is located in an area commonly considered safe for surgical procedures. However, published reports of severe complications after interventions in the mandibular symphysis area indicate the need for caution when approaching this region surgically. The aim of this study was to evaluate the vertical location of the MLF and the median lingual canal (MLC) by measuring the distances of these landmarks to the root apex of the lower central incisors (LCI) and to the menton cephalometric point (Me) on pre-orthognathic surgery cone beam computed tomography scans (N = 100). The results were analyzed in relation to the patients' type of deformity, age, sex, and number of foramina (single vs multiple). The median MLF-LCI and MLF-Me distances were 5.9 mm and 15.0 mm, respectively, while the mean MLC-LCI and MLC-Me distances were 9.7 mm and 11.6 mm, respectively. The mean LCI-Me distance was 21.3 mm, while the mean MLC length was 3.4 mm. Apart from the length of the MLC, the distances were all significantly greater in the male patients than in the female patients. The MLC-Me distance and MLC length differed significantly according to the number of foramina. In preoperative planning, the vertical locations of the MLF and respective MLC appear to be relevant for avoiding neurovascular complications.