Robotic-assisted laparoscopic radical prostatectomy for treatment of a newly identified lesion revealed no viable cells in the previously treated area with microwave focal therapy.

Introduction: Histological outcome of the targeted focal therapy is in principle confirmed by targeted needle biopsy from the treated area in clinical trial. Herein, we report a rare case in which the MFT was followed by RARP. Case presentation: A 68-year-old man with PSA 9.6 ng/mL and PI-RADS 4 lesion in the right transition zone on multi-parametric MRI underwent MR/ultrasound fusion-guided targeted biopsy, which revealed grade-group 1 cancer. Targeted focal therapy with microwave ablation was performed, resulting in disappearance of the PI-RADS 4 lesion at post-operative 4 months. However, PSA rose to 11.5 ng/mL, and a new PI-RADS 4 lesion, was identified in the left peripheral zone. RARP was performed to reveal new grade-group 3 cancer, and no viable cells in the previously treated area with MFT. Conclusion: RARP was safely performed even after MFT and proved the pathological complete response of microwave ablation.

Recent studies on alternative technologies for deep-fat frying.

Deep fat fried food products have been considered as a vital dietary contributor to certain chronic diseases, including the risk of atherosclerosis, cancer and hypertension. Hence, many food industries are focusing on low fat fried products to attract consumers. In general, oil is absorbed during deep fat frying, and this century old process is used for preparing various kinds of fried food products such as potato chips, banana chips, savory snacks, etc. Vacuum frying, electric field frying and two-stage frying technologies have been developed as an alternatives to traditional frying. These two technologies are suitable for most fried products; however, they may not be suitable for sugar based fruits as they can lead to the formation of browning reactions, which are generally considered unacceptable. This review aims to cover recent work done in the area of vacuum frying and two-stage frying, including the role of pre-treatment and post-treatment novel methods. Additionally, emphasis has been given on recent innovations to improve the quality of vacuum and two-stage frying, particularly concerning the reduction of oil uptake in fried food products.

Percutaneous ablation for adrenal metastasis from non-small-cell lung cancer: comparison between cryoablation and microwave ablation.

Introduction: While cryoablation (CA) and microwave ablation (MWA) have both been implemented as approaches to the treatment of adrenal metastasis (AM), the outcomes associated with these two therapeutic strategies remain unclear. Aim: To compare the safety and efficacy of CA and MWA as treatments for AM in patients with non-small-cell lung cancer (NSCLC). Material and methods: Consecutive patients with AM secondary to NSCLC from January 2015 to December 2020 underwent CA or MWA. Treatment-related outcomes and complications were retrospectively compared between these groups. Results: In total, 68 NSCLC patients with isolated AM were enrolled in this study, of whom 35 and 33 underwent treatment with CA and MWA, respectively. Primary complete ablation rates in the CA and MWA groups were 91.4% (32/35) and 93.9% (31/33) respectively (p = 1.000), while a 100% secondary complete ablation rate was observed for both groups. Hypertensive crisis incidence affected 11.4% (4/35) and 9.1% (3/33) of patients in the CA and MWA groups (p = 1.000), respectively, while 8 (22.9%) and 8 (24.2%) patients in these corresponding groups experienced local progression after ablation that was detected during the follow-up period (p = 0.893). Patients in the CA and MWA groups exhibited a median progression-free survival of 18 and 22 months, respectively (p = 0.411), while the corresponding median overall survival of patients in these groups was 25 and 29 months (p = 0.786). Conclusions: CT-guided CA and MWA appear to exhibit similar safety and efficacy profiles when employed to treat isolated AM in NSCLC patients.

Preparation of imidazolium ionic liquid functionalized paper membrane for selective extraction of caffeic acid and its structural and functional analogues from Taraxaci Herba.

In the search for pharmaceutically active compounds from natural products, it is crucial and challenging to develop separation or purification methods that target not only structurally similar compounds but also those with specific pharmaceutical functions. The adsorption-based method is widely employed in this field and holds potential for this application, given the diverse range of functional monomers that can be chosen based on structural or functional selectivity. In this work, an imidazolium ionic liquid (IL) modified paper membrane was synthesized via microwave reaction. Caffeic acid (CA), with potential interactions with imidazolium IL and a representative component of phenolic acids in Taraxaci Herba, was chosen as a target compound. After optimization of synthesis and extraction parameters, the resulting extraction membrane could be used to quantitatively analyze CA at ng/ml level, and to extract CA's analogues from the sample matrix. Cheminformatics confirmed the presence of structural and functional similarity among these extracted compounds. This study offers a novel approach to preparing a readily synthesized extraction membrane capable of isolating compounds with structural and functional analogies, as well as developing a membrane solid-phase extraction-based analytical method for natural products.

Flexible phase change film based on lignin-derived porous carbon/Eicosane for wearable thermal management and microwave absorption.

A flexible phase-change film with thermal management and microwave absorption capabilities was developed for use in wearable devices. The film was created using a solution casting method based on a porous carbon-loaded eicosane (LP33/EI) material. LP33 served as the porous encapsulation medium, while Eicosane (EI) acted as the phase change component. The flexible substrate was a blend of polyvinyl alcohol (PVA) and bacterial cellulose nanocellulose (BC). The ultrathin film had a thickness of 0.262 mm, and LP33/EI-4 exhibited exceptional mechanical strength of 188 MPa. Testing revealed that the phase transition process had melting and crystallization enthalpies of 134.71 J/g and 126.11 J/g, respectively. The encapsulation structure effectively prevented any leakage during the phase transition process. Under simulated solar irradiation of 200 mW/cm2, LP33/EI-4 achieved a photothermal conversion efficiency (η) of 89.46 %. Additionally, the porous LP33 structure and high dielectric loss contributed to remarkable microwave absorption capabilities of -42 dB in the X-band and - 52 dB in the Ku-band. Overall, LP33/EI films demonstrated exceptional performance in thermal management, energy storage, and microwave absorption, making them an ideal choice for a variety of applications in wearable devices.

Comparison of four rheological models for estimating viscosity and rheological parameters of microwave treated Basil seed gum.

Dispersion of Basil seed gum has high viscosity and exhibits shear-thinning behavior. This study aimed to analyze the influence of microwave treatment (MT) at various time intervals (0, 1, 2, and 3 min) on the viscosity and rheological behavior of Basil seed gum dispersion (0.5%, w/v). The finding of this study revealed that the apparent viscosity of Basil seed gum dispersion (non-treated dispersion) reduced from 0.330 Pa.s to 0.068 Pa.s as the shear rate (SR) increased from 12.2 s-1 to 171.2 s-1. Additionally, the apparent viscosity of the Basil seed gum dispersion reduced from 0.173 Pa.s to 0.100 Pa.s as the MT time increased from 0 to 3 min (SR = 61 s-1). The rheological properties of gum dispersion were successfully modeled using Power law (PL), Bingham, Herschel-Bulkley (HB), and Casson models, and the PL model was the best one for describing the behavior of Basil seed gum dispersion. The PL model showed an excellent performance with the maximum r-value (mean r-value = 0.942) and the minimum sum of squared error (SSE) values (mean SSE value = 5.265) and root mean square error (RMSE) values (mean RMSE value = 0.624) for all gum dispersion. MT had a considerable effect on the changes in the consistency coefficient (k-value) and flow behavior index (n-value) of Basil seed gum dispersion (p < 0.05). The k-value of Basil seed gum dispersion decreased significantly from 3.149 Pa.sn to 1.153 Pa.sn (p < 0.05) with increasing MT time from 0 to 3 min. The n-value of Basil seed gum dispersion increased significantly from 0.25 to 0.42 (p < 0.05) as the MT time increased. The Bingham plastic viscosity of Basil seed gum dispersion increased significantly from 0.029 Pa.s to 0.039 Pa.s (p < 0.05) while the duration of MT increased. The Casson yield stress of Basil seed gum dispersion notably reduced from 5.010 Pa to 2.165 Pa (p < 0.05) with increasing MT time from 0 to 3 min.

Preparation of cellulose derived carbon/reduced graphene oxide composite aerogels for broadband and efficient microwave dissipation.

The development of cellulose derived carbon-based composite aerogels with light weight, broad bandwidth and strong absorption remains a challenging task. In this work, the cellulose derived carbon/reduced graphene oxide composite aerogels were prepared by a two-stage process of chemical crosslinking and high-temperature carbonization. The results revealed that the as-fabricated binary composite aerogels had a unique lightweight characteristic and three-dimensional porous network structure, which was chemically crosslinked by epichlorohydrin. Furthermore, the weight concentration of graphene oxide (GO) had a notable influence on the electromagnetic parameters and microwave absorption properties of the composite aerogels. The obtained binary composite aerogel possessed the optimal microwave dissipation capability when the concentration of GO was 1.5 mg/mL. Remarkably, the minimum reflection loss reached -50.42 dB at a thickness of 2.47 mm and a filling ratio of 17.5 wt%. Concurrently, the composite aerogel with a comparable thickness of 2.73 mm showed a wide effective absorption bandwidth of 7.28 GHz, spanning the total Ku-band and extending into a portion of the X-band. The radar cross section contribution of binary composite aerogels in the far-field was also simulated by computer simulation technique. In addition, the potential microwave attenuation mechanism was proposed. It was believed that the results of this paper would offer a reference for the preparation of cellulose derived carbon-based composite aerogels as efficient and broadband microwave absorbers.

Microwave-Assisted Efficient Intercalation for Fast Fabrication of High-Quality and Large-Size Single-Layer Ti3C2Tx Nanosheets.

A novel microwave-assisted intercalation (MAI) strategy is proposed for fast and efficient intercalation of layered MXene to prepare large-size single-layer MXene. After LiF-HCl etching of Ti3AlC2, the as-prepared multi-layer Ti3C2Tx (M-T) are intercalated with Li3AlF6 as an intercalator and ethylene glycol (EG) as a solvent under microwave irradiation for 5 min. Furthermore, the dispersed high-quality large-sized single-layer Ti3C2Tx (S-T) nanosheets with a thickness of 1.66 nm and a large lateral size over 20 µm are achieved with a yield of over 60% after a further ultrasonic delamination followed by electrostatic precipitation, acid washing, and calcination. In addition, Pd/S-T composite catalyst, which is constructed with Pd nanoparticles supported on the as-prepared S-T nanosheets, exhibits an excellent performance for rapid and efficient selective hydrogenation of nitroarenes with H2 under a mild condition. At room temperature, full conversion of nitrobenzene and 100% aniline selectivity are achieved over Pd/S-T catalyst in 20 min with 0.5 MPa of H2 pressure. This work provides a novel method for facile, fast, and large-scale preparation of single-layer MXene and develops a new approach for constructing efficient nanocatalytic systems.

Insight into the mechanism of the aggregation behavior of wheat protein modulated by l-lysine under microwave irradiation.

This study explored the mechanism of l-lysine intervention in wheat gluten protein (WG) gel formation under a microwave (MW) field. The results showed that the MW treatment had higher ζ-potential values at the same heating rate. After adding l-lysine, the solution conductivity and dielectric loss were significantly increased. Moreover, the WG gel strength enhanced 4.40% under the MW treatment. The Fourier spectra showed that the α-helix content was decreased 13.78% with the addition of lysine. The ultraviolet absorption spectra and fluorescence spectra indicated that MW irradiation impacted the interactions between WG molecules more effectively than the water bath heating, promoting the denaturation and unfolding of the protein structure. In addition, scanning electron microscopy analysis showed that the incorporation of lysine promoted an ordered network structure formation of the protein, which enhanced the gel properties. This indicated that the zwitterion of l-lysine played a regulatory role in the aggregation of proteins in the MW field.

Graphene via Microwave Expansion of Graphite Followed by Cryo-Quenching and its Application in Electrostatic Droplet Switching.

Monoelemental atomic sheets (Xenes) and other 2D materials offer record electronic mobility, high thermal conductivity, excellent Young's moduli, optical transparency, and flexural capability, revolutionizing ultrasensitive devices and enhancing performance. The ideal synthesis of these quantum materials should be facile, fast, scalable, reproducible, and green. Microwave expansion followed by cryoquenching (MECQ) leverages thermal stress in graphite to produce high-purity graphene within minutes. MECQ synthesis of graphene is reported at 640 and 800 W for 10 min, followed by liquid nitrogen quenching for 5 and 90 min of sonication. Microscopic and spectroscopic analyses confirmed the chemical identity and phase purity of monolayers and few-layered graphene sheets (200-12 µm). Higher microwave power yields thinner layers with enhanced purity. Molecular dynamics simulations and DFT calculations support the exfoliation under these conditions. Electrostatic droplet switching is demonstrated using MECQ-synthesized graphene, observing electrorolling of a mercury droplet on a BN/graphene interface at voltages above 20 V. This technique can inspire the synthesis of other 2D materials with high purity and enable new applications.

Designing Symmetric Gradient Honeycomb Structures with Carbon-Coated Iron-Based Composites for High-Efficiency Microwave Absorption.

The impedance matching of absorbers is a vital factor affecting their microwave absorption (MA) properties. In this work, we controllably synthesized Material of Institute Lavoisier 88C (MIL-88C) with varying aspect ratios (AR) as a precursor by regulating oil bath conditions, followed by one-step thermal decomposition to obtain carbon-coated iron-based composites. Modifying the precursor MIL-88C (Fe) preparation conditions, such as the molar ratio between metal ions and organic ligands (M/O), oil bath temperature, and oil bath time, influenced the phases, graphitization degree, and AR of the derivatives, enabling low filler loading, achieving well-matched impedance, and ensuring outstanding MA properties. The MOF-derivatives 2 (MD2)/polyvinylidene Difluoride (PVDF), MD3/PVDF, and MD4/PVDF absorbers all exhibited excellent MA properties with optimal filler loadings below 20 wt% and as low as 5 wt%. The MD2/PVDF (5 wt%) achieved a maximum effective absorption bandwidth (EAB) of 5.52 GHz (1.90 mm). The MD3/PVDF (10 wt%) possessed a minimum reflection loss (RLmin) value of - 67.4 at 12.56 GHz (2.13 mm). A symmetric gradient honeycomb structure (SGHS) was constructed utilizing the high-frequency structure simulator (HFSS) to further extend the EAB, achieving an EAB of 14.6 GHz and a RLmin of - 59.0 dB. This research offers a viable inspiration to creating structures or materials with high-efficiency MA properties.

Novel neuroprotective 5,6-dihydropyrido[2',1':2,3]imidazo[4,5-c]quinoline derivatives acting through cholinesterase inhibition and CB2 signaling modulation.

A novel group of 5,6-dihydropyrido [2',1':2,3]imidazo [4,5-c]quinolines was prepared via a microwave assisted one-pot telescopic approach. The synthetic sequence involves the formation of an amine precursor of imidazo [1,2-a]pyridine via condensation and reduction under microwave irradiation. Subsequently, the Pictet-Spengler cyclisation reaction occurs with ketones (cyclic or acyclic) to obtain substituted 5,6-dihydropyrido [2',1':2,3]imidazo [4,5-c]quinolines in excellent yields. The compounds were tested as neuroprotective agents. Observed protection of neuron-like cells, SH-SY5Y differentiated with ATRA, in Parkinson's and Huntington's disease models inspired further mechanistic studies of protective activity against damage induced by 1-methyl-4-phenylpyridinium (MPP+), a compound causing Parkinson's disease. The novel compounds exhibit similar or higher potency than ebselen, an established drug with antioxidant activity, in the cells against MPP + -induced total cellular superoxide production and cell death. However, they exhibit a significantly higher capacity to reduce mitochondrial superoxide and preserve mitochondrial membrane potential. We also observed marked differences between a selected derivative and ebselen in terms of normalizing MPP + -induced phosphorylation of Akt and ERK1/2. The cytoprotective activity was abrogated when signaling through cannabinoid receptor CB2 was blocked. The compounds also inhibit both acetylcholine and butyrylcholine esterases. Overall the data show that novel 5,6-dihydropyrido [2',1':2,3]imidazo [4,5-c]quinoline have a broad cytoprotective activity which is mediated by several mechanisms including mitoprotection.

Method optimization for the extraction of chlorogenic acids from coffee parchment: An ecofriendly alternative.

One of the principal byproducts of coffee roasting is the coffee parchment. It is abundant in bioactive substances, including derivatives of chlorogenic acids, which are well-known for their exceptional antioxidant effects. It is advantageous to use environmentally friendly extraction techniques on such residues since it adds value to the entire coffee production process supply chain. The aim of this work was to assess and enhance the ability of non-conventional extraction techniques to extract derivatives of chlorogenic acid from coffee parchment. A central composite design was used to maximize the recovery of those phenolic compounds. The optimized extraction conditions were with 5 min extraction period, at a temperature of 70 °C, and 80% ethanol in the extractor solvent. In this conditions extraction recovery of chlorogenic acids was of 0.8% by the use of microwave-aided extraction (MAE). The optimized conditions are practical, economical, and ecologically friendly method to extract phenolic compounds and, consequently, underscores the potential for sustainable utilization of coffee parchment, offering a valuable contribution to the development of environmentally conscious strategies within the coffee industry.

Green Synthesis and Multifunctional Properties of Cu/NiO Nanocomposites Using Commelina benghalensis Leaf Extract.

This study presents the green synthesis and multifunctional properties of Cu/NiO nanocomposites (NCs) fabricated with varying ratios (90:10, 80:20, and 70:30) using Commelina benghalensis leaf extract. X-ray diffraction (XRD) analysis confirmed the polycrystalline nature of the NCs, revealing crystallite sizes of 13.62, 13.22, and 7.14 nm. Scanning electron microscopy (SEM) showed rod-shaped and agglomerated particles with sizes ranging from 17.64 to 22.97 nm. Energy-dispersive X-ray spectroscopy (EDX) verified the elemental composition of copper, nickel, oxygen, and carbon. UV-visible spectroscopy determined the energy band gaps to be in the range of 1.24-1.56 eV. Fourier-transform infrared spectroscopy (FT-IR) indicated the presence of bioactive compounds responsible for the reduction of precursor metal salts. The Cu/NiO NCs exhibited remarkable antimicrobial activity, with the 90:10 ratio showing the highest zones of inhibition at 32.76±0.23 mm, 18.66±0.33 mm, and 14.36±0.32 mm against Bacillus subtilis, Staphylococcus aureus, and Escherichia coli, respectively. Additionally, the 70:30 Cu/NiO NCs demonstrated superior antioxidant activity, with a radical scavenging efficiency of 83.22%, closely approaching that of ascorbic acid (96.98%). Photocatalytic evaluations revealed that the NCs were highly effective in degrading environmental pollutants, achieving 97.69% degradation of malachite green and 96.52% of congo red under UV light irradiation. The novelty of this work lies in the use of Commelina benghalensis leaf extract as a sustainable and eco-friendly reducing and stabilizing agent for synthesizing Cu/NiO NCs, offering a green alternative to conventional methods. The synergistic effects between Cu and NiO in the different compositions (90:10, 80:20, and 70:30) enhanced the overall antimicrobial and photocatalytic activities, highlighting their potential for environmental remediation applications.

Local Treatment of Desmoid Tumors: An Update.

Desmoid tumors (DTs) are rare fibroblastic proliferations, characterized by infiltrative growth and a propensity for local recurrence. Traditional strategies such as surgery, radiotherapy, and chemotherapy are the mainstays of treatment, each with its limitations and associated risks. The trend in DT management leans toward a "wait-and-see" strategy, emphasizing active surveillance supported by continuous MRI monitoring. This approach acknowledges the unpredictable nature of the disease, and a multidisciplinary management of DT requires a nuanced approach, integrating traditional therapies with emerging interventional techniques. This review highlights the emerging role of minimally invasive interventional radiological technologies and discusses interventional radiology techniques, including chemical, radiofrequency, microwave, cryoablation, and high-intensity focused ultrasound ablations as well as transarterial embolization.

Sulfur release behavior and sulfur fixation mechanism during biomass microwave co-pyrolysis of Ascophyllum and rice straw.

Co-pyrolysis with low-sulfur biomass is expected to improve the yield and quality of bio-fuels, without the usage of calcium-based desulfurizer. Sulfur transformation during microwave fluidized-bed co-pyrolysis between terrestrial and marine biomass (Ascophyllum, AS; Rice straw, RS) was investigated. Sulfur release was promoted during biomass co-pyrolysis, but it was inhibited during pyrolysis between AS and low-sulfur char. Thermal cracking of biomass was promoted during co-pyrolysis between biomass, accelerating the combination of H atoms and -SH radicals. Introduction of low-sulfur bio-char (CA) inhibited the generation of bio-char and the release of sulfur. Released sulfur was captured by -OH/C = C functional groups on bio-char through dehydration reactions/addition reactions, forming mercaptan in bio-char. Furthermore, introduction of microwave and bio-char promoted the cyclization and aromatization reaction, converting mercaptan to thiophene and improving the thermal stability of solid sulfur, and thus increasing in-situ sulfur fixation rate.

Facile construction of copper-doped metal organic framework as a novel visible light-responsive photocatalyst for contaminant degradation.

ABSTRACTMetal-organic frameworks (MOFs) with photocatalytic activity have garnered significant attentions in environmental remediation. Herein, copper-doped zeolitic imidazolate framework-7 (Cu-doped ZIF-7) was synthesized rapidly and easily using a microwave-assisted technique. Various analytical and spectroscopic methods were employed to access the framework, morphology, light absorption, photo-electrochemical and photocatalytic performance of the synthesized materials. Compared to ZIF-7, Cu/ZIF-7 (molar ratio of Cu2+ to Zn2+ is 1:1) demonstrates superior visible light absorption ability, narrower band gap, enhanced charge separation capability, and reduced electron-hole recombination performance. Under visible light irradiation, Cu/ZIF-7 serves as a Fenton-like catalyst and demonstrates exceptional activity for contaminant degradation, while virgin ZIF-7 remains inactive. With the addition of 9.8 mmol H2O2 and exposure to visible light for 30 min, 10 mg of Cu/ZIF-7 can completely decompose RhB solution (10 mg/L, 50 mL). The synergistic effect of the Cu/ZIF-7/H2O2/visible light system is attributed to visible light photocatalysis and Fenton-like reactions. Cu/ZIF-7 demonstrates excellent catalytic performance stability, with only a slight decrease in degradation efficiency from an initial 97.0% to 95.4% over four cycles. Additionally, spin-trapping ESR measurements and active species trapping experiments revealed that h+ and ·OH occupied a significant position for Rhodamine B (RhB) degradation. Degradation intermediate products of Rhodamine B have been identified using UPLC-MS, and the degradation pathways have been proposed and discussed. This work offers a facile and efficient technique for developing MOF-based visible light photocatalysts for water purification.

Design and experimental validation of a metamaterial-based sensor for microwave imaging in breast, lung, and brain cancer detection.

This study proposes an innovative geometry of a microstrip sensor for high-resolution microwave imaging (MWI). The main intended application of the sensor is early detection of breast, lung, and brain cancer. The proposed design consists of a microstrip patch antenna fed by a coplanar waveguide with a metamaterial (MTM) layer-based lens implemented on the back side, and an artificial magnetic conductor (AMC) realized on as a separate layer. The analysis of the AMC's permeability and permittivity demonstrate that the structure exhibits negative epsilon (ENG) qualities near the antenna resonance point. In addition, reflectivity, transmittance, and absorption are also studied. The sensor prototype has been manufactures using the FR4 laminate. Excellent electrical and field characteristics of the structure are confirmed through experimental validation. At the resonance frequency of 4.56 GHz, the realized gain reaches 8.5 dBi, with 3.8 dBi gain enhancement contributed by the AMC. The suitability of the presented sensor for detecting brain tumors, lung cancer, and breast cancer has been corroborated through extensive simulation-based experiments performed using the MWI system model, which employs four copies of the proposed sensor, as well as the breast, lung, and brain phantoms. As demonstrated, the directional radiation pattern and enhanced gain of the sensor enable precise tumor size discrimination. The proposed sensor offers competitive performance in comparison the state-of-the-art sensors described in the recent literature, especially with respect to as gain, pattern directivity, and impedance matching, all being critical for MWI.

Immunomodulatory effects of microwave ablation on malignant tumors.

Image-guided thermal ablation (IGTA) is an important treatment modality for interventional oncology. It is widely used for the treatment of solid tumors, such as liver, lung, breast, kidney, and thyroid cancers. IGTA include radiofrequency ablation, microwave ablation (MWA), cryoablation, and laser ablation. Compared with other energy sources, MWA has the advantage of a large ablative volume, short ablative time, and a low heat sink effect. MWA can also induce antitumor immunity; however, only a minority of patients derive a clinical benefit from it. Based on these data, the combination of MWA and immunotherapy has emerged as a promising new direction for cancer treatment. This review article focuses on current research on the combination of MWA and immunotherapy. The status of immune activation and related studies involving MWA for the treatment of various malignant tumors are discussed.