Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction.

The asymptotic homogenization method is applied to characterize the effective behaviour of periodic multi-laminated micropolar elastic heterogeneous composites under perfect contact conditions. The local problem formulations and the analytical expressions for the effective stiffness and torque coefficients are derived for the centrosymmetric case. One of the main findings in this work is the analysis of the rotations effect of the layers' constitutive properties on the mechanical response of bi-laminated composites. The effects of microstructure and interfacial interactions on the composite's mechanical behaviour are captured through the independent effective moduli. Comparisons with the classical elastic case show the approach validation. Some numerical examples are shown. Furthermore, considering the micropolar media's prevalence in bio-inspired systems, the model's applicability is evaluated for reconstructing bone fractures using multi-laminated biocomposites. An important finding in this bio-inspired simulation is related to the analysis of a periodic bi-laminated micropolar composite whose isotropic constituents are a bioceramic material and a compact bone. This artificial bio-inspired material should integrate with host tissue to support cell growth and be stable and compatible. These characteristics are crucial in the enhancement of the fractured bone.

Reliability Simulation Analysis of TSV Structure in Silicon Interposer under Temperature Cycling.

As semiconductor integration scales expand and chip sizes shrink, Through Silicon Via (TSV) technology advances towards smaller diameters and higher aspect ratios, posing significant challenges in thermo-mechanical reliability, particularly within interposer substrates where mismatched coefficients of thermal expansion exacerbate issues. This study conducts a thermo-mechanical analysis of TSV structures within multi-layered complex interposers, and analyzes the thermal stress behavior and reliability under variable temperature conditions (-55 °C to 85 °C), taking into account the typical electroplating defects within the copper pillars in TSVs. Initially, an overall model is established to determine the critical TSV locations. Sub-model analysis is then employed to investigate the stress and deformation of the most critical TSV, enabling the calculation of the temperature cycle life accordingly. Results indicate that the most critical TSV resides centrally within the model, exhibiting the highest equivalent stress. During the temperature cycling process, the maximum deformation experiences approximately periodic variations, while the maximum equivalent stress undergoes continuous accumulation and gradually diminishes. Its peak occurs at the contact interface corner between the TSV and Redistribution Layer (RDL). The estimated life of the critical point is 3.1708 × 105 cycles. Furthermore, it is observed that electroplating defect b alleviates thermal stress within TSVs during temperature cycling. This study provides insights into TSV thermal behavior and reliability, which are crucial for optimizing the design and manufacturing processes of advanced semiconductor packaging.

Influential Factors on Diffusion Bonding Strength as Demonstrated by Bonded Multi-Layered Stainless Steel 316L and 430 Stack.

In this study, we optimized the parameters of diffusion bonding on multi-layered stainless steel 316L and 430 stacks. The preparation process for diffusion bonding is crucial, as the bonding surfaces need to be polished and meticulously cleaned to ensure a smooth bonding process. We fabricated twelve-layer plates consisting of 55 mm × 55 mm × 3 mm and 100 mm × 50 mm × 3 mm dimensions, and the bonding response was investigated by evaluating the tensile strength of the bonding zone under varying bonding conditions, with a bonding temperature ranging from 1000 to 1048 °C, a bond time ranging from 15 to 60 min, pressure ranging from 10 to 25.3 MPa, and under a vacuum environment. SS430 exhibits a significantly higher compression creep rate than SS316L. The compressibility of diffusion welding materials does not impact the diffusion bonding strength. Multi-axial tensile strength tests confirmed strong bonding joint strength in various axes. The tensile strengths of monolithic and Diffusion bonding (DB) specimens tested in parallel are essentially identical. The optimized diffusion bonding parameters (Condition G2C: 1048 °C/25.3 MPa/15 min) are ideal for producing SS316L stainless steel cores in compact heat exchangers, offering a superior bonding quality and reduced costs. These findings have practical implications for the production of stainless steel cores in compact heat exchangers, demonstrating the relevance and applicability of our research.

Epigenetic factors direct synergistic and antagonistic regulation of transposable elements in Arabidopsis.

Arabidopsis (Arabidopsis thaliana) HISTONE DEACETYLASE 6 (HDA6) and HISTONE DEMETHYLASES LSD-LIKE 1 (LDL1) and LDL2 synergistically regulate the expression of long non-coding RNAs associated with H3Ac and H3K4me2. The underlying mechanisms of such highly coordinated interactions among genetic and epigenetic factors contributing to this collaborative regulation remain largely unclear. We analyzed all transposable elements (TEs) across the Arabidopsis genome and the individual and combined roles of HDA6 and LDL1/LDL2 by dissecting multi-layered epigenomes and their association with transcription. Instead of an individual synergistic effect, we observed dual synergistic and antagonistic effects, which are positively associated with H3Ac and H3K4me2 while maintaining a negative but moderate association with DNA methylation. Specifically, two modes of synergistic regulation were discovered in TEs: 74% are primarily regulated by HDA6, with less dependence on LDL1/LDL2, and the remaining 26% are co-regulated by both. Between the two modes, we showed that HDA6 has a strong effect on TE silencing, whereas LDL1/LDL2 plays a weaker yet crucial role in co-regulation with HDA6. Our results led to a model of epigenomic regulation - the differential de-repression between the two modes of synergistic regulation of TEs was determined by H3Ac and H3K4me2 levels, where TEs are in accessible chromatins free of DNA methylation, and this open chromatin environment precedes transcriptional changes and epigenome patterning. Our results discovered unbalanced effects of genetic factors in synergistic regulation through delicately coordinated multi-layered epigenomes and chromatin accessibility.

The effect of deviations in sintering temperature on the translucency and color of multi-layered zirconia.

OBJECT: This study aimed to investigate the changes in the translucency and color of four different multi-layered zirconia materials when the sintering temperature were inaccurate. MATERIALS AND METHODS: Two hundred zirconia samples (11 × 11 × 1.0 mm) of four multi-layered zirconia, Upcera TT-GT (UG), Upcera TT-ML (UM), Cercon xt ML (CX), and Lava Esthetic (LE), were divided into five subgroups according to the sintering temperature: L1 (5% lower temperature), L2 (2.5% lower temperature), R (recommended sintering temperature), H2 (2.5% higher temperature), H1 (5% higher temperature). After sintering, color coordinates were measured. Then the translucency parameter (TP) values, and the color differences (between the inaccurate sintering temperature and the recommended temperature) of each zirconia specimen were calculated. Statistical analysis was performed by using three-way ANOVA tests, the one-way ANOVA, and Tukey's post hoc test. RESULTS: Three-way ANOVA results showed that material type, sintering temperature, specimen section, and their interactions significantly influenced the TP values (except for the interactions of specimen section and sintering temperature) (P < .05). TP values of zirconia specimens were significantly different in the inaccurate sintering temperatures (P < .05), except for the cervical and body sections of UG group (P > .05). Compared with recommended sintering temperature, higher sintering temperature caused higher TP values for CX, but lower for LE. Three-way ANOVA results showed that material type, sintering temperature, and their interactions significantly influenced the ∆E00 values (P < .05). There were no significant differences in ∆E00 values of UM and CX groups at different inaccurate sintering temperatures, and were clinical imperception (except for UM-L1) (∆E00 < 1.25). ∆E00 values of all zirconia specimens showed clinically acceptable (∆E00 < 2.23). CONCLUSION: The deviations in sintering temperature significantly influenced the translucency and color of tested multi-layered zirconia. The trends of translucency in the multi-layered zirconia depended on material type and the color changes of all zirconia materials were clinically acceptable at inaccurate sintering temperatures.

Ultra-stable nano-micro bubbles in a biocompatible medium for safe delivery of anti-cancer drugs.

We conducted a series of experimental investigations to generate laser-stimulated millimeter bubbles (MBs) around silver nanoparticles (AgNPs) and thoroughly examined the mechanism of bubble formation within this nanocomposite system. One crucial aspect we explored was the lifetime and kinetics of these bubbles, given that bubbles generated by plasmonic nanoparticles are known to be transient with short durations. Surprisingly, our findings revealed that the achieved lifetime of these MBs extended beyond seven days. This impressive longevity far surpasses what has been reported in the existing literature. Further analysis of the experimental data uncovered a significant correlation between bubble volume and its lifetime. Smaller bubbles demonstrated longer lifetimes compared to larger ones, which provided valuable insights for future applications. The experimental results not only confirmed the validity of our model and simulations but also highlighted essential characteristics, including extended lifetime, matching absorption coefficients, adherence to physical boundary conditions, and agreement with simulated system parameters. Notably, we generated these MBs around functionalized AgNPs in a biocompatible nanocomposite medium by utilizing low-power light excitation. By readily binding potent cancer drugs to AgNPs through simple physical mixing, these medications can be securely encapsulated within bubbles and precisely guided to targeted locations within the human body. This capability to deliver drugs directly to the tumor site, while minimizing contact with healthy tissues, can lead to improved treatment outcomes and reduced side effects, significantly enhancing the quality of life for cancer patients.

A Laboratory Experimental Study on Enhancing the Oil Recovery Mechanisms of Polymeric Surfactants.

In order to evaluate the physical and chemical properties of polymer surfactants and analyze their oil displacement mechanisms, three types of poly-surfactant used in the Daqing oil field were chosen to be researched, and the oil displacement effects were studied using poly-surfactants of different viscosity, dehydrating rate, and core permeability. The main purpose is to determine the reasonable range of different characteristic indexes of polymeric surfactant flooding. The oil displacement effect of 15 cores was analyzed, and the effects of viscosity, the dehydrating rate of emulsion, and permeability on EOR (Enhanced Oil Recovery) were analyzed. The oil displacement mechanisms of polymeric surfactants were researched using a photolithographic glass core. This paper explores the mechanism underlying production enhancement as an EOR target, while simultaneously conducting laboratory tests to assess the physical and chemical properties of polymeric surfactants. The poly-surfactant agents exhibit a notable increase in viscosity, with the optimal displacement effect observed at a core effective permeability exceeding 400 mD, resulting in a potential EOR of 15% or higher. Moreover, at a viscosity ranging between 40 and 70 mPa·s, the total EOR can reach 73%, with the peak efficiency occurring at a viscosity of 60 mPa·s. The water loss rate of the emulsion, ranging between 30% and 70%, achieves optimal performance at 50%. The poly-surfactants' higher viscosity extends the oil sweep area, enhancing recovery efficiency, and noticeably reducing residual oil compared to water flooding. During poly-surfactant flooding, a substantial amount of residual oil is extracted and transformed into droplets. The rapid emulsification of the polymeric surfactant solution with crude oil forms a stable emulsion, contributing to its significant oil recovery effect. This research provides valuable technical support for EOR in thin and low-quality reservoirs of onshore multi-layered sandstone reservoirs.

From EU-SoilHydroGrids to HU-SoilHydroGrids: A leap forward in soil hydraulic mapping.

Spatially explicit, quantitative information on soil hydraulic properties is required in various modelling schemes. At European scale, EU-SoilHydroGrids proved its applicability in a number of studies, in ecological predictions, geological and hydrological hazard assessment, agri-environmental models, among others. Inspired by its continental antecedent, an analogous, but larger scale, national, 3D soil hydraulic database was elaborated for the territory of Hungary (HU-SoilHydroGrids) supported by various improvements (i-iv) in the computation process. Pedotransfer functions (PTFs) were built in the form of i) advanced machine learning methods and ensemble models, and trained on the ii) national soil hydrophysical dataset. The set of predictors used in PTFs was supplemented by iii) additional environmental auxiliary variables. Spatial layers of the soil hydraulic parameters were generated using iv) 100 m resolution information on primary soil properties, namely DOSoReMI.hu. HU-SoilHydroGrids provides information on the most frequently required soil hydraulic properties (water content at saturation, field capacity and wilting point, saturated hydraulic conductivity and van Genuchten parameters for the description of the moisture retention curve) with national coverage at 100 m spatial resolution down to 2 m depth for six GSM standard depth layers. The HU-SoilHydroGrids has significantly lower squared error in the case of describing the moisture retention curve and hydraulic conductivity than the EU-SoilHydroGrids. The derived 3D soil hydraulic database (ver1.0) is presently available in National Laboratory for Water Science and Water Safety for project partners in order to test its functional performance in describing hydrological and ecological processes.

Regulated Self-Folding in Multi-Layered Hydrogels Considered with an Interfacial Layer.

Multi-layered hydrogels consisting of bi- or tri-layers with different swelling ratios are designed to soft hydrogel actuators by self-folding. The successful use of multi-layered hydrogels in this application greatly relies on the precise design and fabrication of the curvature of self-folding. In general, however, the self-folding often results in an undesired mismatch with the expecting value. To address this issue, this study introduces an interfacial layer formed between each layered hydrogel, and this layer is evaluated to enhance the design and fabrication precision. By considering the interfacial layer, which forms through diffusion, as an additional layer in the multi-layered hydrogel, the degree of mismatch in the self-folding is significantly reduced. Experimental results show that as the thickness of the interfacial layer increases, the multi-layered hydrogel exhibits a 3.5-fold increase in its radius of curvature during the self-folding. In addition, the diffusion layer is crucial for creating robust systems by preventing the separation of layers in the muti-layered hydrogel during actuation, thereby ensuring the integrity of the system in operation. This new strategy for designing multi-layered hydrogels including an interfacial layer would greatly serve to fabricate precise and robust soft hydrogel actuators.

Modelling groundwater pollutant transfer mineral micropollutants in a multi-layered aquifer in Burkina Faso (West African Sahel).

In Burkina Faso, human activities around water points in rural areas affect groundwater resources, which become unfit for consumption. Nearly 33.5% of boreholes are subject to point source pollution. The assessment of the evolution of such pollution should be monitored to assess groundwater quality. In addition, withdrawals for irrigation alone are estimated at 85%, i.e. 46% of the water demand, heightening the deterioration in quality while creating depression zones further leading to an increase in recharge. It is therefore critical to understand the evolution and fate of the transfer of pollutants in such environments. In this study, we aimed to model the transfer of pollutant and predict the future state of pollution using the MT3D-USGS Groundwater Solute Transport Simulator code through the Groundwater Modelling Software (GMS) over the period 2012-2062 (50 years). A mathematical model is further developed through inferential statistics and used as a surrogate model for comparison. The results showed that deterioration in water quality was more attributable to withdrawals, especially for Cyanide (Cn) and Arsenic (As). A rather slow degradation is reported for Lead (Pb), which extends over 22 km, and Fluoride (F), which extends from 4 to 10 km due to localized recharge. A faster degradation for Cn over a distance of 2-16 km and as from 3 to 11 km is also observed because of the geological setting of the subsoil. These results might assist decision-makers for the quantitative and qualitative management of groundwater resources, and the management of the basement aquifer in the area through the establishment of protection zones.

Coupled thermo-mechanical interaction on a multi-layered skin tissue with temperature-dependent physical properties irradiated by a pulse laser.

A detailed understanding of the coupled thermo-mechanical interaction on the biological tissue irradiated by a pulse laser is essential for the existed therapeutic methods constructed on the photo-thermal effect, which will contribute to the design, characterization and optimization of strategies for delivering better treatment. The aim of present work is to explore the coupled thermo-mechanical behavior of a multi-layered skin tissue with temperature-dependent physical properties under the pulsed laser irradiation. A layered theoretical model involved variable physical parameters with temperature has been proposed firstly according to the generalized theory of thermo-elasticity with dual-phase lag mechanism. The numerical method based on an explicit finite difference scheme is then employed to predict the temporal and spatial distributions of the temperature, thermal deformation and stresses experienced to a short-pulse laser irradiation. On this basis, the effect of variable thermal and mechanical physical parameters of skin tissue on the coupled thermo-mechanical behavior and relative thermal damage has been evaluated.

Preparation of cationic surfactant modified two-dimensional (2D) multi-layered Ti3C2Tx MXene for methyl orange removal from aqueous solution: Kinetic, equilibrium, and adsorption mechanisms.

In this study, cetyltrimethylammonium bromide-modified multi-layered Ti3C2Tx MXene (CMM) was produced using a Ti3AlC2 precursor, and its capacity to remove the anionic dye, methyl orange (MO), was investigated in detail. An electrostatic combination between negatively charged Ti3C2Tx nanosheets and cationic surfactant solution (CTAB) produced this adsorbent. This triggered an exposure of the accessible active sites to further boost adsorption effectiveness by increasing the distance between the MXene nanosheets. Prepared adsorbents were characterized using some analytical techniques, including TGA, FESEM, EDX, FTIR, XRD, and N2 adsorption-desorption. Furthermore, some influencing parameters such as contact time, solution of pH, loading adsorbent, and initial dye concentration were evaluated, with findings showing that MO could adsorb CMM to its maximum capacity at an adsorbent dosage of 0.83 g/L, a contact time of 90 min, and a solution pH of 3. Adsorption results were found to be highly linked with both Langmuir isotherm (R2 = 0.9990) and the pseudo-second-order kinetic model (R2 = 0.9924). The maximum adsorption capacity of MO was obtained at approximately 213.00 mg/g. Also, hydrogen bonding, π-cation interactions, and electrostatic adsorption can all be implicated in the mechanism of MO adsorption on CMM. The fabricated CMM is presented as a prospective adsorbent for the removal of dyes from polluted water, demonstrating robust recyclability for up to the fifth iteration. All these outstanding properties indicate that cetyltrimethylammonium bromide-modified multi-layered Ti3C2Tx MXene can be considered as applicable adsorbents for textile pollutants.

Plasmonic Multi-Layered Built-in Hotspots Nanogaps for Effectively Activating Analytes.

Multi-layered plasmonic nanostructures are able to highly promote the near-field confinement and effectively activate analytes, which are of predominate significance but are extremely challenging. Herein, the semi-open Au core@carved AuAg multi-shell superstructure nanoparticles (multi-Au@Ag-Au NPs, multi = mono, bi, tri, tetra, and penta) are reported with a high designability on electromagnetic field and capability of effectively capturing analytes. By controlling synthetic parameters such as the number of galvanic exchange and Ag growth, multi-Au@Ag-Au NPs are successfully obtained, with tunable layer numbers and asymmetric nanoholes. Due to collective plasmon oscillations of multi-layered built-in nanogaps, the electromagnetic field strength of a single penta-Au@Ag-Au entity reach 48841. More importantly, the penta-Au@Ag-Au NPs show a remarkable light-harvesting capability, which is adaptive to different Raman lasers, supporting high-diversity detection. Additionally, the structural specificity allows analytes to be sufficiently captured into interior hotspots, and further achieve highly sensitive detection with limit of detection down to 3.22 × 10-12  M. This study not only provides an effective pathway for integrating abundant hotspots and activating target molecules in single plasmonic superstructure, but stimulates advancements in SERS substrates for various applications.

Surface Performance of Nano-CrN/TiN Multi-Layered Coating on the Surface of Ti Alloy.

Surface coating has been widely used to ameliorate the surface properties of Ti alloys. In this study, high-power pulsed magnetically controlled sputtering technology was used to successfully prepare a nano-CrN/TiN multi-layered coating on the surface of a TC4 Ti alloy. The surface of the obtained coating was uniform, dense, and free of obvious defects. With the decrease in modulation period, the optimal growth of the nano-CrN/TiN multi-layered coating was changed from a (220) crystal surface to (111) and a (200) crystal surface. Compared to the single-layered CrN or TiN coating, the nano-multi-layered coating had higher hardness and lower wear rate. Furthermore, the hardness and the wear resistance increased with the decrease in the modulation period. This presented an optimal modulation period of 6 nm. Meanwhile, the resistance of the obtained coating to high-temperature oxidation at 800 °C was also significantly improved.

A multi-layered network model identifies Akt1 as a common modulator of neurodegeneration.

The accumulation of misfolded and aggregated proteins is a hallmark of neurodegenerative proteinopathies. Although multiple genetic loci have been associated with specific neurodegenerative diseases (NDs), molecular mechanisms that may have a broader relevance for most or all proteinopathies remain poorly resolved. In this study, we developed a multi-layered network expansion (MLnet) model to predict protein modifiers that are common to a group of diseases and, therefore, may have broader pathophysiological relevance for that group. When applied to the four NDs Alzheimer's disease (AD), Huntington's disease, and spinocerebellar ataxia types 1 and 3, we predicted multiple members of the insulin pathway, including PDK1, Akt1, InR, and sgg (GSK-3ß), as common modifiers. We validated these modifiers with the help of four Drosophila ND models. Further evaluation of Akt1 in human cell-based ND models revealed that activation of Akt1 signaling by the small molecule SC79 increased cell viability in all models. Moreover, treatment of AD model mice with SC79 enhanced their long-term memory and ameliorated dysregulated anxiety levels, which are commonly affected in AD patients. These findings validate MLnet as a valuable tool to uncover molecular pathways and proteins involved in the pathophysiology of entire disease groups and identify potential therapeutic targets that have relevance across disease boundaries. MLnet can be used for any group of diseases and is available as a web tool at http://ssbio.cau.ac.kr/software/mlnet.

Bi-coloured enhanced luminescence imaging by targeted switch on/off laser MEF coupling for synthetic biosensing of nanostructured human serum albumin.

In this communication luminescent bioconjugated human serum albumin nanostructures (HSA NPs) with tiny ultraluminescent gold core-shell silica nanoparticles (Au@SiO2-Fl) were designed with enhanced bi-coloured luminescence properties. The HSA NPs were obtained from Human Serum Albumin free (HSA free) through the desolvation method, and Au@SiO2-Fl, through modified Turkevich and Störber methods. In this manner, porous HSA Nanostructures of 150.0-200 nm and Au@SiO2-Fl 45.0 nm final diameters were obtained. Both methodologies and structures were conjugated to obtain modified Nanocomposites based on tiny gold cores of 15 nm surrounded with well spatial Nanostructured architectures of HSA (d15 Au@SiO2-Fl-HSA) that generated variable nanopatterns depending on the modified methodology of synthesis applied within colloidal dispersions. Therefore, three methodologies of non-covalent conjugation were developed. In optimal conditions, through Transmission Electronic Microscopy (TEM), well resolved multilayered nano-architectures with a size 190.0-200 nm in average with variable contrast depending of the focused nanomaterial within the nanocomposite were shown. Optimized nanoarchitecture was based on a template tiny gold core-shell surrounded by nanostructured HSA NPs (d15 Au@SiO2-Fl-HSA). In this manner, the NanoImaging generated by laser fluorescence microscopy permitted to record improved optical properties and functionalities, such as: (i) enhanced ultraluminescent d15 Au@SiO2-Fl-HSA composites in comparison to individual components based on Metal Enhanced Fluorescence (MEF); (ii) diminished photobleaching; (iii) higher dispersibility; (iv) higher resolution of single bright nano-emitters of 210.0 nm sizes; and (v) enhanced bi-coloured Bio-MEF coupling with potential non-classical light delivery towards other non-optical active biostructures for varied applications. The characterization of these nanocomposites allowed the comparison, evaluation and discussion focused on new properties generated and functionalities based on the incorporation of different types of tuneable materials. In this context, the biocompatibility, Cargo confined spaces, protein-based materials, optical transparent could be highlighted, as well as optical active materials. Thus, the potential applications of nanotechnology to both nanomedicine and nano-pharmaceutics were discussed.

Viability of Glycolysis for the Chemical Recycling of Highly Coloured and Multi-Layered Actual PET Wastes.

The chemical recycling of poly(ethylene terephthalate) -PET- fractions, derived from actual household packaging waste streams, using solvolysis, was investigated. This recycling strategy was applied after a previous on-line automatic identification, by near-infrared spectroscopy -NIR-, and a subsequent selective sorting of the different PET materials that were present in the packaging wastes. Using this technology, it was possible to classify fractions exclusively including PET, virtually avoiding the presence of both other plastics and materials, such as paper, cardboard and wood, that are present in the packaging wastes, as they were efficiently recognised and differentiated. The simple PET fractions, including clear and monolayered materials, were adequate to be recycled by mechanical means meanwhile the complex PET fractions, containing highly coloured and multi-layered materials, were suitable candidates to be recycled by chemical routes. The depolymerisation capacity of the catalytic glycolysis, when applied to those complex PET wastes, was studied by evaluating the effect of the process parameters on the resulting formation and recovery of the monomer bis(2-hydroxyethyl) terephthalate -BHET- and the achieved quality of this reaction product. Comparable and reasonable results, in terms of monomer yield and its characteristics, were obtained independently of the type of complex PET waste that was chemically recycled.

Adjacent tissues modulate shear wave propagation in axially loaded tendons.

Shear wave tensiometry is a noninvasive approach for gauging tendon loads based on shear wave speed. Transient shear waves are induced and tracked via sensors secured to the skin overlying a superficial tendon. Wave speeds measured in vivo via tensiometry modulate with tendon load but are lower than that predicted by a tensioned beam model of an isolated tendon, which may be due to the added inertia of adjacent tissues. The objective of this study was to investigate the effects of adjacent fat tissue on shear wave propagation measurements in axially loaded tendons. We created a layered, dynamic finite element model of an elliptical tendon surrounded by subcutaneous fat. Transient shear waves were generated via an impulsive excitation delivered across the tendon or through the subcutaneous fat. The layered models demonstrated dispersive behavior with phase velocity increasing with frequency. Group shear wave speed could be ascertained via dispersion analysis or time-to-peak measures at sequential spatial locations. Simulated wave speeds in the tendon and adjacent fat were similar and modulated with tendon loading. However, wave speed magnitudes were consistently lower in the layered models than in an isolated tendon. For all models, the wave speed-stress relationship was well described by a tensioned beam model after accounting for the added inertia of the adjacent tissues. These results support the premise that externally excited shear waves are measurable in subcutaneous fat and modulate with axial loading in the underlying tendon. The model suggests that adjacent tissues add inertia to the system, which in turn lowers shear wave speeds. This information must be considered when using tensiometry as a clinical or research tool to infer absolute tendon loading.

Exploring the influence of placing bi-directional E-glass fibers as protective layer under a CAD-CAM resin composite on the fracture pattern.

OBJECTIVES: To investigate the influence of the presence and position of bidirectional E-glass fibers under a CAD-CAM resin composite on the fracture pattern evaluated both after quasi-static mechanical loading and after fatigue. METHODS: Rectangular specimens (10 mm-long, 5 mm-large and 4.2 mm-thick) were prepared and divided into four groups (n = 30/group). The control group (C-Group) consisted of a 4.2 mm-thick layer of monolithic CAD/CAM resin composite resin (Cerasmart, GC). In the 3 other groups including the placement of a fiber layer (F-Groups), the CAD/CAM resin composite layer was reduced to 3-, 2- and 1-mm thickness (F3-, F2- and F1-Groups, respectively). Two bonded layers of bidirectional E-glass FRC (Dentapreg, ADM A.S.) were bonded underneath and a light-curable resin composite base (Gaenial Posterior, GC) was then added to reach a total thickness of 4.2 mm for all samples. In each group, half of the specimens (n = 15) were submitted to quasi-static mechanical loading to failure in a universal testing machine. The other half (n = 15) was subjected to cyclic isometric stepwise loading until failure or completion of 105000 cycles (5000 cycles at 500 N, followed by five stages of 20000 cycles at 750 N, 1000 N, 1250 N, 1500 N, and 1750 N). The data were analyzed by Weibull statistics for quasi-static loading, and by the Kaplan-Meier product limit estimation procedure after fatigue. All fractured specimens were studied using light and electron microscopy techniques, and the types of fracture were determined. RESULTS: For quasi-static mechanical loading, significant differences were observed for Weibull modulus and characteristic strength between groups, with values ranging from 10.8 to 22.4 for the former and from 2336.6 to 2974.7 for the latter. Also, survival after stepwise fatigue revealed statistically significant differences between groups (p < 0.05), the lowest values of cycles before failure being observed for F1-Group - Median = 61223 (50415; 65446) - as compared to the other groups - C-Group: Median = 89005 (86189; 98195); F3-Group: Median = 85198 (77279; 87860); F2-Group: Median = 89306 (87454; 97024). Both in quasi-static loading and after fatigue, the observation of fracture modes revealed major differences. While all fractures were vertical (split) in C-Group, the majority of the specimens in F-Groups presented some degree of horizontal deflection of the crack. In all deviated fractures, fractographic analysis confirmed a toughening effect of the fiber layer. SIGNIFICANCE: The present in vitro work tends to show that the fracture pattern of CAD-CAM resin composites is favorably affected by the presence and position of an underlying bidirectional E-glass fiber layer. The placement of E-glass fibers under a CAD-CAM resin composite may therefore represent an interesting strategy to reduce the risk of catastrophic restoration failure, which could be integrated in the development of the new generation of indirect materials, possibly in 3D-printing approaches.

An antibacterial Multi-Layered scaffold fabricated by 3D printing and electrospinning methodologies for skin tissue regeneration.

A multi-layered scaffold can mimic the hierarchical structure of the skin, accelerate the wound healing, and protect the skin against contamination and infection. In this study, a three-layered (3L) scaffold was manufactured through a combination of 3D printing and electrospinning technique. A top layer of polyurethane (PU) nanofibrous coating for the prevention of micro-organism penetration was created through electrospining. The middle layer was prepared through the 3D printing of Pluronic F127-quaternized chitosan-silver nitrate nanoparticles (F127-QCS-AgNO3), as the porous absorbent and antibacterial layer. A bottom layer of core-shell nanofibrous structure of F127-mupirocin/pectin-keratin (F127-Mup/Pec-Kr) for tissue regeneration and enable antibacterial activity was coated onto the middle layer. A range of techniques were applied to fully characterize the resultant structure. The average tensile strength and elastic modulus of the 3L scaffold were measured as 0.65 ± 0.08 MPa and 9.37 ± 2.33 MPa, respectively. The release of Ag ions, mupirocin (Mup), and the antibacterial activity of the dressings was investigated. According to the results, the highest rate of cell adhesion and viability, and angiogenic potential among the studied samples were related to the 3L scaffold, which was also found to significantly accelerate the wound healing.