Hollow Microcavity Electrode for Enhancing Light Extraction.

Luminous efficiency is a pivotal factor for assessing the performance of optoelectronic devices, wherein light loss caused by diverse factors is harvested and converted into the radiative mode. In this study, we demonstrate a nanoscale vacuum photonic crystal layer (nVPCL) for light extraction enhancement. A corrugated semi-transparent electrode incorporating a periodic hollow-structure array was designed through a simulation that utilizes finite-difference time-domain computational analysis. The corrugated profile, stemming from the periodic hollow structure, was fabricated using laser interference lithography, which allows the precise engineering of various geometrical parameters by controlling the process conditions. The semi-transparent electrode consisted of a 15 nm thick Ag film, which acted as the exit mirror and induced microcavity resonance. When applied to a conventional green organic light-emitting diode (OLED) structure, the optimized nVPCL-integrated device demonstrated a 21.5% enhancement in external quantum efficiency compared to the reference device. Further, the full width at half maximum exhibited a 27.5% reduction compared to that of the reference device, demonstrating improved color purity. This study presents a novel approach by applying a hybrid thin film electrode design to optoelectronic devices to enhance optical efficiency and color purity.

Elastic Waves Excitation and Focusing by a Piezoelectric Transducer with Intermediate Layered Elastic Metamaterials with and without Periodic Arrays of Interfacial Voids.

Optimization of the structure of piezoelectric transducers such as the proper design of matching layers can increase maximum wave energy transmission to the host structure and transducer sensitivity. A novel configuration of an ultrasonic transducer, where elastic metamaterial insertion is introduced to provide bulk wave mode conversion and to increase wave energy transfer into a substrate, is proposed. Configurations of layered elastic metamaterials with crack-like voids are examined theoretically since they can provide wide band gaps and strong wave localization and trapping. The analysis shows that the proposed metamaterial-based matching layers can sufficiently change wave energy transmission from a piezoelectric active element for various frequency ranges (relatively low frequencies as well as higher ones). The proposed configuration can also be useful for advanced sensing with higher sensitivity in certain frequency ranges or for demultiplexing different kinds of elastic waves.

Simple Design of Broadband Polarizers Using Transmissive Metasurfaces for Dual Band Ku/Ka Band Applications.

Major challenges affecting polarizers for communication systems include the inability to perform over a wide bandwidth with a simple design. Orthogonal outgoing polarization for polarization-diverse applications and stable performances for oblique incidence angles are also major requirements. This paper presents the design of a polarizer that can perform over a wide range of bandwidths in dual frequency bands. The unit cell is uniquely designed using a split circular ring resonator enclosed in a square ring with the addition of three-square patches. As a result, the incoming linearly polarized x(y) wave is converted into a transmitted LHCP (RHCP) wave in the Ku and Ka bands. The operational bandwidths are 11.05~16.75 GHz (41%) and 34.16~43.03 GHz (23%). The proposed polarizer is ultrathin, works in dual wide-bands, is polarization-diverse, and maintains performance over ±45° and ±30° oblique incidences, which makes it a strong candidate for many communication systems.

Graphene-Based Nanoelectromechanical Periodic Array with Tunable Frequency.

Phononic crystals (PnCs) have attracted much attention due to their great potential for dissipation engineering and propagation manipulation of phonons. Notably, the excellent electrical and mechanical properties of graphene make it a promising material for nanoelectromechanical resonators. Transferring a graphene flake to a prepatterned periodic mechanical structure enables the realization of a PnC with on-chip scale. Here, we demonstrate a nanoelectromechanical periodic array by anchoring a graphene membrane to a 9 × 9 array of standing nanopillars. The device exhibits a quasi-continuous frequency spectrum with resonance modes distributed from ∼120 MHz to ∼980 MHz. Moreover, the resonant frequencies of these modes can be electrically tuned by varying the voltage applied to the gate electrode sitting underneath. Simulations suggest that the observed band-like spectrum provides an experimental evidence for PnC formation. Our architecture has large fabrication flexibility, offering a promising platform for investigations on PnCs with electrical accessibility and tunability.

Honeycomb-like periodic porous LaFeO3 thin film chemiresistors with enhanced gas-sensing performances.

The use of composite materials and polynary compounds is a promising strategy to promote conductometric sensor performances. The perovskite oxides provide various compositional combinations between different oxides for tuning gas-sensing reaction and endowing rich oxygen deficiencies for preferable gas adsorption. Herein, a sacrificial colloidal template approach is exploited to fabricate crystalline ternary LaFeO3 perovskite porous thin films, by transferring a La(3+)-Fe(3+) hybrid solution-dipped template onto a substrate and sequent heat treatment. The honeycomb-like LaFeO3 film consisted of monolayer periodic pore (size: ∼ 500 nm) array can be successfully in situ synthesized in a homogeneous layout with a single phase of perovskite. This periodic porous LaFeO3 film with p-type semiconductivity exhibits a high gas response, fast response (∼4 s), trace detection capacity (50 ppb), and favorable ethanol selectivity from similar acetone. It exhibits enhanced sensing performances compared to those of a binary n-type Fe2O3 film and a nontemplated dense LaFeO3 film. In addition, a five-axe spiderweb diagram is introduced to make a feasible evaluation of the optimal practical work condition, comprehensively regarding the response/recovery rate, gas response, selectivity and operating temperature. The enhanced ethanol sensing mechanism of honeycomb-like LaFeO3 periodic porous film is also addressed. This novel and facile route to fabricate well-ordered porous LaFeO3 thin film can also be applied to many fields to obtain special performances, such as solar cells, ion conductors, gas separation, piezoelectricity, and self-powered sensing device system.