Ethanol-responsive structural colors with multi-level information encryption based on the patterned three-layer inverse opal photonic crystal.

Stimulus-responsive inverse opal photonic crystals (IOPCs) with tunable structural colors show significant promise in information security. To improve upon the traditional bilayer structure with limited color information and single decoding mode, this work developed an ethanol-responsive structure with multi-level information encryption ability by inserting a functional layer into two shielding layers (red Layer A with a photonic stop band (PSB) at 640 nm and green Layer C with a PSB at 530 nm). The functional layer was composed of colorless Layer B, a quick response (QR) code pattern made of TiO2 nanoparticles, and a dense polymer. Due to the isolation of distinct layers, different reflectance values, and different PSB positions of the three-layer IOPC, the structural color of Layer B could only be "turned on" by wetting the entire structure when its PSB redshifted from 360 nm to 460 nm. Specifically, when either side was individually wetted, the PSB of Layer A or C redshifted to 825 nm or 685 nm, and the color of the QR code was dominated by the unwetted red or green layer. After the entire structure had been soaked, the blue QR code was decoded. Meanwhile, when the detecting angle increased from 5° to 60°, the PSBs of Layers B and C in the wetted three-layer IOPC blueshifted from 460 nm to 365 nm and from 685 nm to 540 nm, respectively, which resulted in a cascade decoding process with a single- or mixed-color output. This structure provides a good foundation for multi-level information encryption.

Tunable optical and photovoltaic performance in PTB7-based colored semi-transparent organic solar cells integrated MgF2/WO3 1D-photonic crystals via advanced light management.

This study explores the design, fabrication, and characterization of PTB7-based colored semi-transparent organic solar cells (ST-OSCs) with integrated MgF2/WO3 one-dimensional photonic crystals (1D-PCs). Integrating 1D-PCs enhanced light management by creating tunable photonic band gaps, leading to extraordinary color change and improved photon harvesting. For 1DPC5 - 425 the Average Visible Transmittance (AVT) values were 33.3%, and CIE x, y was 0.43, 0.52, for 1DPC3 - 650 AVT were 25.09% and CIE x, y was 0.23, 0.27, respectively. Thus, extraordinary color changes from blue to yellow could be achieved while keeping transparency. Thereupon, photovoltaic performance showed notable improvements, with Jsc increasing from 7.98 mA/cm2 to 9.95 mA/cm2 and 10.45 mA/cm2 for 1DPC5 - 425 and 1DPC3 - 650, respectively. By 1D-PC integration, power conversion efficiency (PCE) reached from 3.93 to 4.90% and 5.08% for 1DPC5 - 425 and 1DPC3 - 650, respectively. The Color Rendering Index (CRI) indicated successful color tuning and acceptable rendering, with CRI of 52 and 87. The study demonstrates that 1D-PC integration significantly enhances ST-OSCs' optical and photovoltaic properties, paving the way for advanced energy-harvesting applications.

A Template Method Leads to Precisely Synthesize SiO2@Fe3O4 Nanoparticles at the Hundred-Nanometer Scale.

Constructing photonic crystals with core-shell structured nanoparticles is an important means for applications such as secure communication, anti-counterfeiting marking, and structural color camouflage. Nonetheless, the precise synthesis technology for core-shell structured nanoparticles at the hundred-nanometer scale faces significant challenges. This paper proposes a controlled synthesis method for core-shell structured nanoparticles using a template method. By using 100 nm diameter silica nanospheres as templates and coating them with a ferroferric oxide shell layer, SiO2@Fe3O4 core-shell structured nanoparticles with regular morphology and good uniformity can be obtained. The study experimentally investigated the effects of feed amount, modifiers, temperature, and feed order on the coating effect, systematically optimizing the preparation process. Centrifugal driving technology was used to achieve structural colors in the visible wavelength range. Additionally, the method successfully created well-defined and uniform core-shell structured nanoparticles using 200 nm diameter silica nanospheres as templates, demonstrating that this controllable synthesis method can effectively produce core-shell structured nanoparticles over a wide range of particle sizes. The template method proposed in this paper can significantly improve morphological regularity and size uniformity while effectively reducing the preparation cost of core-shell structured nanoparticles.

Highly Tunable Light Absorber Based on Topological Interface Mode Excitation of Optical Tamm State.

Optical absorbers based on Tamm plasmon states are known for their simple structure and high operational efficiency. However, these absorbers often have limited absorption channels, and it is challenging to continuously adjust their light absorption rates. Here, we propose a Tamm plasmon state optical absorber composed of a layered stack structure consisting of one-dimensional topological photonic crystals and graphene nano-composite materials. Using the four-by-four transfer matrix method, we investigate the structural relationship of the absorber. Our results reveal that topological interface states (TISs) effectively excite the optical Tamm state (OTS), leading to multiple absorption peaks. This expands the number of absorption channels, with the coupling number of the TIS determining the transmission quality of these channels-a value further adjustable by the period number of the photonic crystals. Tuning the filling factor, refractive index, and thickness of the graphene nano-composite material allows for a wide range of control over the device's absorption rate, from 0 to 1. Additionally, adjusting the defect layer thickness, incident angle, and Fermi energy enables us to control the absorber's operational bandwidth and the switching of its absorption effect. This work presents a new approach to expanding the tunability of optoelectronic devices.

Realization of ultra-compact and high contrast ratio all-optical 4-to-2 encoder based on 2D photonic crystals.

Optical encoders are widely used circuits in digital systems. One of the most critical features of an optical encoder is the power values in two logic states; low and high. The difference between these two values is expressed with the contrast ratio (CR) parameter. This research has designed and simulated an optical encoder based on a two-dimensional (2D) photonic crystal with four inputs and two outputs. The results show that the proposed structure has low power in low mode and high intensity in high mode. This difference in two logical modes has caused the proposed encoder to have CR = 19.8 dB, which is improved compared to previous works. Also, the proposed structure is very compact and its footprint is as small as 96.88 µm2. The data speed for the designed encoder is B R = 2 Tb/s . This encoder can be used in high-speed optical integrated circuits with low error according to the obtained values.

Enhanced Colorimetric Detection of Volatile Organic Compounds Using a Dye-Incorporated Photonic Crystal-Based Sensor Array.

Chemoresponsive dyes offer the potential to selectively detect volatile organic compounds (VOCs) unique to certain disease states. Among different VOC sensing techniques, colorimetric sensing offers the advantage of facile recognition. However, it is often challenging to discern the color changes by the naked eye. Here, highly sensitive colorimetric VOC sensor arrays from dye-incorporated colloidal photonic crystals (dye-cPhCs) are reported. cPhCs are scalably fabricated on a 4-inch wafer by spin-coating of silica nanoparticles (NPs) dispersed in a photo-cross-linkable monomer, where the gradient shear flow along the film thickness creates densely-packed square arrays of NPs in the top layers, whereas the bulk is quasi-amorphous with larger periodicities. The broadened reflection peak allows for augmented dye absorption originating from the overlap between the photonic bandgap edge of the cPhC and the dye absorption peak, leading to a more noticeable color change upon exposure to VOCs. The sensor array generates distinct color difference maps for acetaldehyde, acetone, and acetic acid, respectively, without any data amplification. The limit of detection for acetaldehyde, acetone, and acetic acid is 1, 0.1, and 0.02 ppm, respectively. Moreover, VOC can be diagonalized by visually intuitive pattern recognition, and principal component analysis at reduced dimensionality is demonstrated.

Construction of Patterned Cu2O Photonic Crystals on Textile Substrates for Environmental Dyeing with Excellent Antibacterial Properties.

Structural dyeing has attracted much attention due to its advantages such as environmental friendliness, vivid color, and resistance to fading. Herein, we propose an alternative strategy for fabric coloring based on Cu2O microspheres. The strong Mie scattering effect of Cu2O microspheres enables the creation of vibrant structural colors on fabric surfaces. These colors are visually striking and can potentially be adjusted by tuning the diameter of the microspheres. Importantly, the Cu2O spheres were firmly bonded to the fabrics by using the industrial adhesive PDMS, and the Cu2O structural color fabrics exhibited excellent color fastness to washing, rubbing, and bending. Cu2O structural color fabrics also demonstrated excellent antimicrobial properties against bacteria such as Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The bactericidal rates of Cu2O structural color textiles after washing for E. coli and S. aureus reached 92.40% and 94.53%, respectively. This innovative approach not only addresses environmental concerns associated with traditional dyeing processes but also enhances fabric properties by introducing vibrant structural colors and antimicrobial functionality.

Stretchable Distributed Bragg Reflectors as Strain-Responsive Mechanochromic Sensors.

Mechanochromic materials exhibit color changes upon external mechanical stimuli, finding wide-ranging applications in colorimetric sensing, display technology, and anticounterfeiting measures. Many of these materials rely on fluorescence properties and therefore necessitate external optical or electrical excitation. However, for broader applicability, the detection of color changes by the naked eye only or without complicated detection instrumentation is highly desirable. Photonic crystals offer a promising avenue for attaining such performances. In this work, we present elastomeric distributed Bragg reflectors (DBRs) characterized by a series of photonic bandgaps exhibiting mechanochromic response from the near-infrared to the visible wavelengths. To achieve this, we engineered alternating thin films of a thermoplastic fluoropolymer and a styrene-butadiene copolymer using different elastomeric substrates to attain different behaviors. The reported system demonstrates a reversible and instantaneous shift of the photonic bandgaps in response to 100% strain in multiple deformation cycles. Comparing the DBR stress-strain response with the optical strain response confirms a mechanochromic sensitivity of ∼1.7-6.9 nm/% and ∼80 nm/MPa, with an optical Poisson's ratio in the range 0.3-0.7. All these properties are spectrally dependent, as demonstrated by exploiting the properties of different diffraction order photonic band gaps.

Bioinspired Wearable Hydrogel Composite with Sustained Drug-Release for Wound Healing and Naked-Eye Visual Early Warning of Wound Dehiscence.

Wound healing is critical to the structural and functional restoration of damaged tissue. However, effective wound closure and healing are always great challenges in regenerative engineering. This study provided bioinspired wearable hydrogel composites with drug-releasing hydrogel and nonclose-packed photonic crystals (NPCs) for wound therapy and naked-eye visual early warning of wound dehiscence. Molecular dynamics models and drug-releasing results illustrated the sustained drug release of ibuprofen, and the mechanical properties of the drug-releasing hydrogel were optimized with 1410% tensile strain by introducing fish collagen; their biocompatibility and adhesion were also improved. The structural color of the NPCs blue-shifted from 630 to 500 nm with 15.0% strain, and the original color was customized with poly(methyl methacrylate) (PMMA) concentration and acrylamide content. Compared with the gauze and the traditional hydrogels, the composite provided a moist environment and an effectively closed wound; the debridement and released drug avoided inflammation, and the rat wound was healed 40.5% on the third day and essentially 100% on the 14th day. The work provided a novel strategy for wound healing and naked-eye visual early warning when a wound deforms, which is expected to promote the synergistic development of clinical treatment and visualized early warning.

Facile Synthesis of Soft Core-Shell Nanospheres for Constructing Multiresponsive Photonic Crystal Security Patterns.

Responsive photonic crystals (RPCs) presenting tunable structural colors under external stimuli are widely applied in the fields of dynamic displays, sensors, and anticounterfeiting. However, the development of multiresponsive photonic crystal (MRPC) films possessing versatile variable optical properties remains a significant challenge due to the tedious synthetic procedure of multifunctional building blocks and complex assembly processes, thereby constraining their extensive applications. In the present work, a series of soft nanospheres with a hydrophobic cores and responsive hydrophilic shells have been synthesized by a facile one-step surfactant-free emulsion polymerization method. The MRPC patterns were then prepared by depositing soft nanosphere emulsions onto the 3D-printed substrates with a topological structure followed by drying at room temperature. The shells of soft nanospheres deformed and fused with each other, resulting in the formation of transparent MRPC film patterns. The MRPC patterns exhibited brilliant structural color in a wet state but lost the color again after complete drying. Such a reversible structural color was ascribed to the change of the refractive index (RI) of the hydrophilic shell layers of nanospheres according to wetting/drying state shifting. Moreover, the on-demand designed MRPC patterns could rapidly respond to external stimuli of temperature, pH, and organic solvents in a reversible manner, and multichannel encrypted security labels were also demonstrated. We postulate that our facile and feasible approach can be applied to the systematic design and large-scale production of MRPC patterns for a variety of applications.

Polarization-Controlled Exciton-Polaritons in WS2 Strongly Coupled with Low-Symmetry Photonic Crystal Nanostructures.

Atomically thin transition metal dichalcogenides (TMDs) with ambient stable exciton resonances have emerged as an ideal material platform for exciton-polaritons. In particular, the strong coupling between excitons in TMDs and optical resonances in anisotropic photonic nanostructures can form exciton-polaritons with polarization selectivity, which offers a new degree of freedom for the manipulation of the light-matter interaction. In this work, we present the experimental demonstration of polarization-controlled exciton-polaritons in tungsten disulfide (WS2) strongly coupled with polarization singularities in the momentum space of low-symmetry photonic crystal (PhC) nanostructures. The utilization of polarization singularities can not only effectively modulate the polarization states of exciton-polaritons in the momentum space but also facilitate or suppress their far field coupling capabilities by tuning the in-plane momentum. Our results provide new strategies for creating polarization-selective exciton-polaritons.

Flexible self-supporting photonic crystals: Fabrications and responsive structural colors.

Photonic crystals (PCs) play an increasingly significant role in anti-counterfeiting, sensors, displays, and other fields due to their tunable structural colors produced by light manipulation of photonic stop bands. Flexible self-supporting photonic crystals (FSPCs) eliminate the requirement for conventional structures to rely on the existence of hard substrates, as well as the problem of poor mechanical qualities caused by the stiffness of the building blocks. Meanwhile, diverse production techniques and materials provide FSPCs with varied stimulus-responsive color-changing capacities, thus they have received an abundance of focus. This review summarizes the preparation strategies and variable structural colors of FSPCs. First, a series of preparation strategies by integrating polymers with PCs are summarized, including assembly of colloidal spheres on flexible substrates, polymer packaging, polymer-based direct assembly, nanoimprinting, and 3D printing. Subsequently, variable structural colors of FSPCs with different stimulations, such as viewing angle, chemical stimulation (solvents, ions, pH, biomolecules, etc.), temperature, mechanical/magnetic stress, and light, are described in detail. Finally, the outlook and challenges regarding FSPCs are presented, and several potential directions for their fabrication and application are discussed. It's believed that FSPCs will be a valuable platform for advancing the practical implementation of optical metamaterials.

Colorimetric IPN hydrogels embedded with colloidal photonic crystals: A novel approach for the detection of ethanol and Ba2+ ions in water.

A critical bottleneck in sensor technology is the rapid and precise detection of specific analytes in complex matrices, hindering advancements in environmental monitoring, healthcare, and industrial process control. This study addresses this challenge by introducing a novel composite hydrogel sensor designed for rapid and selective detection of ethanol and barium ions (Ba2+) in aqueous environments. The sensor integrates interpenetrating network (IPN) hydrogels with embedded colloidal photonic crystals (CPCs), synthesized via a solution-based polymerization approach. This innovative configuration allows CPCs to dynamically adjust their photonic bandgap in response to environmental changes, manifesting as a visible, colorimetric shift. This response stems from the synergy between the mechanical properties of the IPN hydrogel and the optical sensitivity of CPCs. Upon exposure to analytes such as ethanol and Ba2+, the sensor exhibits a rapid and reversible color transition that is directly proportional to their concentration. Notably, ethanol (0 vol%-80 vol%) and Ba2+ (5-17.5 mM) induce a distinct blueshift in the photonic bandgap and trigger a color change from red-orange to green due to the alteration in the swelling behavior of the IPN hydrogel, affecting its lattice constant. The IPN hydrogel-CPC composite demonstrates exceptional operational stability and facilitates rapid detection, making it ideal for on-site applications without the need for complex equipment. These characteristics make the composite hydrogel sensor a promising candidate for environmental monitoring, industrial process control, and public health diagnostics, paving the way for the development of next-generation responsive sensor materials.

Improved performance of temperature sensors based on the one-dimensional topological photonic crystals comprising hyperbolic metamaterials.

This paper seeks to progress the field of topological photonic crystals (TPC) as a promising tool in face of construction flaws. In particular, the structure can be used as a novel temperature sensor. In this regard, the considered TPC structure comprising two different PC designs named PC1 and PC2. PC1 is designed from a stack of multilayers containing Silicon (Si) and Silicon dioxide (SiO2), while layers of SiO2 and composite layer named hyperbolic metamaterial (HMM) are considered in designing PC2. The HMM layer is engineered using subwavelength layers of Si and Bismuth Germinate, or BGO ( Bi 4 Ge 3 O 12 ). The mainstay of our suggested temperature sensor is mainly based on the emergence of some resonant modes inside the transmittance spectrum that provide the stability in the presence of the geometrical changes. Meanwhile, our theoretical framework has been introduced in the vicinity of transfer matrix method (TMM), effective medium theory (EMT) and the thermo-optic characteristics of the considered materials. The numerical findings have extensively introduced the role of some topological parameters such as layers' thicknesses, filling ratio through HMM layers and the periodicity of HMM on the stability or the topological features of the introduced sensor. Meanwhile, the numerical results reveal that the considered design provides some topological edge states (TESs) of a promising robustness and stability against certain disturbances or geometrical changes in the constituent materials. In addition, our sensing tool offers a relatively high sensitivity of 0.27 nm/°C.

Radiation sensor based on a 1D-periodic structure infiltrated by (B-co-MP) a conjugated copolymer.

In this study, a novel gamma-ray radiation sensor has been developed depending on a 1D photonic crystal (1D-PhC). Based on porous silicon (PSi) layer that has been penetrated by a conjugated copolymer (B-co-MP) which consists of BEHP-PPV and MEH-PPV, with a fractional ratio of 60:40. The suggested method for the development of the dosimeter is based on the shift of photonic band-gap to shorter wavelengths, where exposure to gamma-ray radiation at doses ranging from 0 to 20 kGy alters the refractive index of the (B-co-MP) copolymer. The fitted experimental data, the equation of Bruggeman effective medium, and the transfer matrix method (TMM) are the main axes in the framework of the current theoretical approach. The collected data shows that, within the visible range, the suggested sensor's sensitivity (224 nm/RIU) is high and stable over a 0-20 kGy applied-dose range. Also, we compared these results with previous research.

Bio-Inspired Photoelectric Dual-Mode Sensor Based on Photonic Crystals for Human Motion Sensing and Monitoring.

Photoelectric dual-mode sensors, which respond to strain signal through photoelectric dual-signals, hold great promise as wearable sensors in human motion monitoring. In this work, a photoelectric dual-mode sensor based on photonic crystals hydrogel was developed for human joint motion detection. The optical signal of the sensor originated from the structural color of photonic crystals, which was achieved by tuning the polymethyl methacrylate (PMMA) microspheres diameter. The reflective peak of the sensor, based on 250 nm PMMA PCs, shifted from 623 nm to 492 nm with 100% strain. Graphene was employed to enhance the electrical signal of the sensor, resulting in a conductivity increase from 9.33 × 10-4 S/m to 2 × 10-3 S/m with an increase in graphene from 0 to 8 mg·mL-1. Concurrently, the resistance of the hydrogel with 8 mg·mL-1 graphene increased from 160 kΩ to 485 kΩ with a gauge factor (GF) = 0.02 under 100% strain, while maintaining a good cyclic stability. The results of the sensing and monitoring of finger joint bending revealed a significant shift in the reflective peak of the photoelectric dual-mode sensor from 624 nm to 526 nm. Additionally, its resistance change rate was measured at 1.72 with a 90° bending angle. These findings suggest that the photoelectric dual-mode sensor had the capability to detect the strain signal with photoelectric dual-mode signals, and indicates its great potential for the sensing and monitoring of joint motion.

3D Printing Photonic Crystals: A Review.

Living organisms in nature possess diverse and vibrant structural colors generated from their intrinsic surface micro/nanostructures. These intricate micro/nanostructures can be harnessed to develop a new generation of colorful materials for various fields such as photonics, information storage, display, and sensing. Recent advancements in the fabrication of photonic crystals have enabled the preparation of structurally colored materials with customized geometries using 3D printing technologies. Here, a comprehensive review of the historical development of fabrication methods for photonic crystals is provided. Diverse 3D printing approaches along with the underlying mechanisms, as well as the regulation methods adopted to generate photonic crystals with structural color, are discussed. This review aims to offer the readers an overview of the state-of-the-art 3D printing techniques for photonic crystals, present a guide and considerations to fabricate photonic crystals leveraging different 3D printing methods.

Shaping in the Third Direction: Colloidal Photonic Crystals with Quadratic Surfaces Self-Assembled by Hanging-Drop Method.

High-quality, 3D-shaped, SiO2 colloidal photonic crystals (ellipsoids, hyperboloids, and others) were fabricated by self-assembly. They possess a quadratic surface and are wide-angle-independent, direction-dependent, diffractive reflection crystals. Their size varies between 1 and 5 mm and can be achieved as mechanical-resistant, free-standing, thick (hundreds of ordered layers) objects. High-quality, 3D-shaped, polystyrene inverse-opal photonic superstructures (highly similar to diatom frustules) were synthesized by using an inside infiltration method as wide-angle-independent, reflective diffraction objects. They possess multiple reflection bands given by their special architecture (a torus on the top of an ellipsoid) and by their different sized holes (384 nm and 264 nm). Our hanging-drop self-assembly approach uses setups which deform the shape of an ordinary spherical drop; thus, the colloidal self-assembly takes place on a non-axisymmetric liquid/air interface. The deformed drop surface is a kind of topological interface which changes its shape in time, remaining as a quality template for the self-assembly process. Three-dimensional-shaped colloidal photonic crystals might be used as devices for future spectrophotometers, aspheric or freeform diffracting mirrors, or metasurfaces for experiments regarding space-time curvature analogy.

Enhanced Fluorescence Based on Slow Light Effect of ZIF-8 Photonic Crystals for Trace 2,4,6-Trinitrophenol Detection.

In response to growing concerns about public safety and environmental conservation, it is essential to develop a precise identification method for trace explosives. To improve the stability and detection sensitivity of perovskite quantum dots (PQDs) and address the issue of low porosity in traditional polymer-based photonic crystals (PhCs), this study proposed a PQD photoluminescence (PL) enhancement strategy based on the slow light effect of ZIF-8 PhCs for highly sensitive, selective, and convenient detection of 2,4,6-trinitrophenol (TNP). The slow light effect at the photonic band gap edge is the basis of amplifying the PL signal. PhCs were fabricated by the evaporation-induced self-assembly method. The diffraction wavelength overlapping the whole visible region was designed to match the emission wavelength of PQDs. Results showed that PhCs matching the PBG edge with PQDs' emission peak amplified the PL signal 11.3 times, significantly improving sensitivity for trace TNP detection with a limit as low as 2.52 nM. Moreover, there was a 13.3-fold enhancement of PQDs' fluorescence lifetime when the emission wavelength fell in the PBG range. The hydrophobic surface of ZIF-8 PhCs enhanced the PQDs' stability and moisture resistance. Furthermore, the selective quenching mechanism of TNP by the sensor was photoinduced electron transfer (PET) verified by DFT calculations and time-resolved PL decay dynamics measurements. This study demonstrated great potential for manipulating light emission enhancement by PhCs in developing efficient fluorescent sensors for trace environmental pollutant detection.

Structural Color Colloidal Photonic Crystals for Biomedical Applications.

Photonic crystals are a new class of optical microstructure materials characterized by a dielectric constant that varies periodically with space and features a photonic bandgap. Inspired by natural photonic crystals such as butterfly scales, a series of artificial photonic crystals are developed for use in integrated photonic platforms, biosensing, communication, and other fields. Among them, colloidal photonic crystals (CPCs) have gained widespread attention due to their excellent optical properties and advantages, such as ease of preparation and functionalization. This work reviews the classification and self-assembly principles of CPCs, details some of the latest biomedical applications of large-area, high-quality CPCs prepared using advanced self-assembly methods, summarizes the existing challenges in CPC construction and application, and anticipates future development directions and optimization strategy. With further advancements, CPCs are expected to play a more critical role in biosensors, drug delivery, cell research, and other fields, bringing significant benefits to biomedical research and clinical practice.