Effects of biomass co-pyrolysis and herbaceous plant colonization on the transformation of tailings into soil like substrate.

Enhancing soil organic matter characteristics, ameliorating physical structure, mitigating heavy metal toxicity, and hastening mineral weathering processes are crucial approaches to accomplish the transition of tailings substrate to a soil-like substrate. The incorporation of biomass co-pyrolysis and plant colonization has been established to be a significant factor in soil substrate formation and soil pollutant remediation. Despite this, there is presently an absence of research efforts aimed at synergistically utilizing these two technologies to expedite the process of mining tailings soil substrate formation. The current study aimed to investigate the underlying mechanism of geochemical changes and rapid mineral weathering during the process of transforming tailings substrate into a soil-like substrate, under the combined effects of biomass co-smoldering pyrolysis and plant colonization. The findings of this study suggest that the incorporation of smoldering pyrolysis and plant colonization induces a high-temperature effect and biological effects, which enhance the physical and chemical properties of tailings, while simultaneously accelerating the rate of mineral weathering. Notable improvements include the amelioration of extreme pH levels, nutrient enrichment, the formation of aggregates, and an increase in enzyme activity, all of which collectively demonstrate the successful attainment of tailings substrate reconstruction. Evidence of the accelerated weathering was verified by phase and surface morphology analysis using X-ray diffraction and scanning electron microscopy. Discovered corrosion and fragmentation on the surface of minerals. The weathering resulted in corrosion and fragmentation of the surface of the treated mineral. This study confirms that co-smoldering pyrolysis of biomass, combined with plant colonization, can effectively promote the transformation of tailings into soil-like substrates. This method has can effectively address the key challenges that have previously hindered sustainable development of the mining industry and provides a novel approach for ecological restoration of tailings deposits.

Comprehensive dental care in patient with Rubinstein-Taybi syndrome: A 3-year case study using progressive desensitization techniques and oral sedation.

AIM: This case study delineates a minimally invasive and effective approach for the aesthetic and functional restoration of teeth in a patient with Rubinstein-Taybi syndrome (RTS), focusing on the challenges and strategies tailored to their specific dental care needs. METHODS AND RESULTS: A 20-year-old patient diagnosed with RTS presented at the Pediatric Dentistry Department for a comprehensive dental assessment and care. The individual's genetic condition manifested in unique dental and craniofacial anomalies, complicating standard dental procedures. Following an initial consultation that underscored limited cooperation due to intellectual disabilities, a customized treatment plan was developed. This included behavior modification techniques to acclimate the patient to dental settings and procedures. Utilizing "simplified technologies" such as volumetric polymerization composites and self-etching primer and adhesive systems, tooth 36 was successfully treated. The approach showcased the potential for dental care in RTS patients with minimal sedation, prioritizing patient comfort and cooperation. CONCLUSION: The successful dental treatment of the RTS patient highlights the importance of patient-centered, minimally invasive approaches in managing individuals with special healthcare needs. Emphasizing continuity of care and prioritizing restorative treatments facilitated significant improvements in oral health and patient cooperation. This case contributes to the sparse literature on dental care for RTS patients, advocating for specialized strategies to address their comprehensive oral health needs. The findings underscore the necessity for interdisciplinary collaboration and innovative care protocols to ensure effective and empathetic dental treatment for individuals with RTS.

Bulk-flow composites in paediatric dentistry: long term survival of posterior restorations. A retrospective study.

Dental decay is a prevalent bacterial disease affecting a significant percentage of children globally. In paediatric dentistry, various materials are available for restoring deciduous teeth, addressing both functional and aesthetic concerns. However, paediatric dentists encounter challenges related to patient compliance, limited working time, and material handling. This study aims to observe the survival rate of bulk-fill composite restorations in paediatric patients over a five-year follow-up. A total of 198 patients aged 0 to 12 years underwent 673 class II restorations on deciduous first molars (1M) and second molars (2M). All restorations were conducted performed by 1 Pediatric DDS resident students from the Paediatric Dentistry Department (Padova University), utilizing using different isolation techniques. Bulk-fill composite restorations were evaluated over a five-year follow-up, and data were collected by a single investigator. After five years, 177 patients and 611 restorations were assessed. The retention rate was higher in primary second molars than in first molars, with fewer marginal dyschromies and less formation of secondary caries. The overall failure rate was higher in primary first molars and primary lower second molars. Bulk-fill composites demonstrated significantly positive performance in terms of retention, maintenance, and marginal dyschromies. Bulk-fill composites are promising materials of choice in paediatric dentistry due to their easy handling and favorable properties. Further research is necessary to compare high and low viscosity bulk-fill composites and assess the impact of different variables on restoration success.

Blood-brain barrier disruption: a culprit of cognitive decline?

Cognitive decline covers a broad spectrum of disorders, not only resulting from brain diseases but also from systemic diseases, which seriously influence the quality of life and life expectancy of patients. As a highly selective anatomical and functional interface between the brain and systemic circulation, the blood-brain barrier (BBB) plays a pivotal role in maintaining brain homeostasis and normal function. The pathogenesis underlying cognitive decline may vary, nevertheless, accumulating evidences support the role of BBB disruption as the most prevalent contributing factor. This may mainly be attributed to inflammation, metabolic dysfunction, cell senescence, oxidative/nitrosative stress and excitotoxicity. However, direct evidence showing that BBB disruption causes cognitive decline is scarce, and interestingly, manipulation of the BBB opening alone may exert beneficial or detrimental neurological effects. A broad overview of the present literature shows a close relationship between BBB disruption and cognitive decline, the risk factors of BBB disruption, as well as the cellular and molecular mechanisms underlying BBB disruption. Additionally, we discussed the possible causes leading to cognitive decline by BBB disruption and potential therapeutic strategies to prevent BBB disruption or enhance BBB repair. This review aims to foster more investigations on early diagnosis, effective therapeutics, and rapid restoration against BBB disruption, which would yield better cognitive outcomes in patients with dysregulated BBB function, although their causative relationship has not yet been completely established.

Efficacy of digital guide-assisted implant restoration in anterior teeth aesthetics and its impact on labial bone mass.

OBJECTIVE: To analyze the efficacy of digital guide-assisted implant restoration technique in enhancing the anterior teeth aesthetics and its impact on labial bone mass. METHODS: We retrospectively analyzed clinical data from 90 patients who underwent maxillary anterior teeth implant restoration at The First People's Hospital of Fuyang, Hangzhou, from January 2021 to September 2023. The patients were divided into two groups: a conventional group (n=45, 45 implants, standard implant restoration) and a digital group (n=45, 45 implants, digital guide-assisted implant). We compared implant positional deviations, changes in dental plaque index (PLI), aesthetic effect scores, labial bone mass differences, and the occurrence of adverse reactions post-treatment between the two groups. RESULTS: The digital group exhibited significantly less deviation in root position in the buccolingual and vertical directions, less neck deviation in the buccolingual and vertical directions, and less apical deviation than the conventional group (P=0.021, P=0.005, P=0.016, P=0.008, P=0.026, respectively). Three months postoperatively, the digital group demonstrated a significantly lower mean PLI (P<0.001), higher white and pink aesthetic scores (P=0.021, P=0.005), and increased alveolar ridge height and coronal and middle labial bone mass (P=0.006, P=0.015, P=0.008). Additionally, this group experienced lower incidence of adverse reactions (4.44% vs. 17.78%) compared with the conventional group (P=0.044). CONCLUSION: The digital guide-assisted implant restoration significantly enhances implant accuracy, reduces bone resorption, improves aesthetic outcomes, and ensures higher safety.

Fungal community determines soil multifunctionality during vegetation restoration in metallic tailing reservoir.

Microorganisms are pivotal in sustaining soil functions, yet the specific contributions of bacterial and fungal succession on the functions during vegetation restoration in metallic tailing reservoirs remains elusive. Here, we explored bacterial and fungal succession and their impacts on soil multifunctionality along a ∼50-year vegetation restoration chronosequence in China's largest vanadium titano-magnetite tailing reservoir. We found a significant increase in soil multifunctionality, an index comprising factors pertinent to soil fertility and microbially mediated nutrient cycling, along the chronosequence. Despite increasing heavy metal levels, both bacterial and fungal communities exhibited significant increase in richness and network complexity over time. However, fungi demonstrated a slower succession rate and more consistent composition than bacteria, indicating their relatively higher resilience to environmental changes. Soil multifunctionality was intimately linked to bacterial and fungal richness or complexity. Nevertheless, when scrutinizing both richness and complexity concurrently, the correlations disappeared for bacteria but remained robust for fungi. This persistence reveals the critical role of the fungal community resilience in sustaining soil multifunctionality, particularly through their stable interactions with powerful core taxa. Our findings highlight the importance of fungal succession in enhancing soil multifunctionality during vegetation restoration in metallic tailing reservoirs, and manipulating fungal community may expedite ecological recovery of areas polluted with heavy metals.

Evaluation of direct restorations for pit-and-fissure caries using stamp combined with single-shade composite resin technique: A 12-month follow-up in vivo study.

OBJECTIVES: To evaluate the clinical performance of direct restorations for pit-and-fissure caries in molars using stamp combined with single-shade composite resin (S/SCR) technique, and assess the effect of the number of stamp pressing on the trueness of S/SCR technique. METHODS: Twenty molars of fifteen patients with pit-and-fissure caries but with an intact or micro-cavitated occlusal morphology were restored using S/SCR technique and were randomly divided into single pressing group (n = 10) and double pressing group (n = 10). Intraoral scans were obtained before treatment (scan 1), after filling (scan 2) and after polishing (scan 3). Deviation distribution maps of pairwise fitting were created including comparison 1 (scan1/scan 2), comparison 2 (scan1/scan 3), and comparison 3 (scan2/scan 3) using Geomagic Control X software. Root mean square (RMS) values were calculated to evaluate the trueness of restorations. Clinical performances including esthetic, functional, and biological properties of all restorations were evaluated according to FDI criteria after a 12-month follow-up. Analysis of variance, independent-samples T test and Wilcoxon rank-sum test were used for statistical analysis (α=0.05). RESULTS: RMS values for comparison 1, comparison 2, and comparison 3 were 0.1243 ± 0.0151, 0.0966 ± 0.0136, and 0.0605 ± 0.0137 mm in single pressing group, while 0.0831 ± 0.0140, 0.0741 ± 0.0107, and 0.0475 ± 0.0099 mm in double pressing group, respectively. RMS value of single pressing group was higher than that of double pressing group in the same comparison (p ≤ 0.001). No statistically significant differences were observed between the two groups regarding esthetic, functional and biological properties (p > 0.05). For all properties, all restorations scored within 3, with over 80% scoring 1. CONCLUSION: S/SCR technique presents satisfying clinical performances for pit-and-fissure caries in molars after a 12-month follow-up. Besides, double pressing can improve the trueness of restorations compared to single pressing. CLINICAL SIGNIFICANCE: S/SCR technique is efficient in direct composite resin restoration for pit-and-fissure caries, with satisfying esthetic, functional and biological properties after a 12-month follow-up. Significantly, double pressing improves the trueness of S/SCR technique, reducing the need for occlusion adjustment.

Correcting directional dark field x-ray imaging artefacts using position dependent image deblurring and attenuation removal.

In recent years, a novel x-ray imaging modality has emerged that reveals unresolved sample microstructure via a "dark-field image", which provides complementary information to conventional "bright-field" images, such as attenuation and phase-contrast modalities. This x-ray dark-field signal is produced by unresolved microstructures scattering the x-ray beam resulting in localised image blur. Dark-field retrieval techniques extract this blur to reconstruct a dark-field image. Unfortunately, the presence of non-dark-field blur such as source-size blur or the detector point-spread-function can affect the dark-field retrieval as they also blur the experimental image. In addition, dark-field images can be degraded by the artefacts induced by large intensity gradients from attenuation and propagation-based phase contrast, particularly around sample edges. By measuring any non-dark-field blurring across the image plane and removing it from experimental images, as well as removing attenuation and propagation-based phase contrast, we show that a directional dark-field image can be retrieved with fewer artefacts and more consistent quantitative measures. We present the details of these corrections and provide "before and after" directional dark-field images of samples imaged at a synchrotron source. This paper utilises single-grid directional dark-field imaging, but these corrections have the potential to be broadly applied to other x-ray imaging techniques.

Nondisassembly Repair of Degraded LiFePO4 Cells via Lithium Restoration from the Solid Electrolyte Interphase.

The disposal of degraded batteries will be a severe challenge with the expanding market demand for lithium iron phosphate (LiFePO4 or LFP) batteries. However, due to a lack of economic and technical viability, conventional metal extraction and material regeneration are hindered from practical application. Herein, we propose a nondisassembly repair strategy for degraded cells through a lithium restoration method based on deep discharge, which can elevate the anodic potential to result in the selective oxidative decomposition and thinning of the solid electrolyte interphase (SEI) on the graphite anode. The decomposed SEI acts as a lithium source to compensate for the Li loss and eliminate Li-Fe antisite defects for degraded LFP. Through this design, the repaired pouch cells show improved kinetic characteristics, significant capacity restoration, and an extended lifespan. This proposed repair scheme relying on SEI rejuvenation is of great significance for extending the service life and promoting the secondary use of degraded cells.

Restoration of cone-circuit functionality in the regenerating adult zebrafish retina.

Unlike humans, teleosts like zebrafish exhibit robust retinal regeneration after injury from endogenous stem cells. However, it is unclear if regenerating cone photoreceptors regain physiological function and integrate correctly into post-synaptic circuits. We used two-photon calcium imaging of living adult retina to examine photoreceptor responses before and after light-induced lesions. To assess functional recovery of cones and downstream outer retinal circuits, we exploited color opponency; UV cones exhibit intrinsic Off-response to blue light, but On-response to green light, which depends on feedback signals from outer retinal circuits. Accordingly, we assessed the presence and quality of Off- vs. On-responses and found that regenerated UV cones regain both Off-responses to short-wavelength and On-responses to long-wavelength light within 3 months after lesion. Therefore, physiological circuit functionality is restored in regenerated cone photoreceptors, suggesting that inducing endogenous regeneration is a promising strategy for human retinal repair.

Comparison of the coexistence pattern of mangrove macrobenthos between natural and artificial reforestation.

The abandoned pond-to-mangrove restoration project provides greater advantages than tidal flats afforestation in restoring mangrove ecosystem services and will be the primary method for mangrove restoration in the future. The existing methods for abandoned pond-to-mangrove restoration include artificial restoration through 'dike-breaking, filling with imported soil and tree planting' and natural restoration through 'dike-breaking and natural succession'. However, little is known about which restoration strategy (natural or artificial restoration) provides more benefits to the biodiversity of mangrove macrobethos. Given a prevailing view suggested that artificial restoration should be the preferred approach for accelerating recovery of biodiversity and vegetation structure in tropical regions, we hypothesised higher macrobenthic biodiversity and more complex community structure in artificial restoration than in natural restoration. To test this hypothesis, macrobenthic biodiversity and ecological processes were monitored in a typical abandoned pond-to-mangrove area of Dongzhaigang Bay, China, where artificial and natural restoration methods were used concurrently. Differences in macrobenthic biodiversity, community structure and ecological processes were compared using diversity indices, complex network analysis and null models. Similar species composition and ecological niche overlap and width among macrobenthos were observed at artificial and natural restoration sites. The biotic heterogeneity and interaction among macrobenthos were higher at the natural restoration sites than at the artificial restoration sites. Macrobenthos community assembly at natural and artificial restoration sites was both determined by deterministic processes, with environmental filtering dominating, which explained 52% and 54% of the variations in macrobenthic community structures respectively. Although our findings did not validate the research hypothesis, higher biotic heterogeneity and species interaction among macrobenthos could support natural restoration as the primary method for abandoned pond-to-mangrove projects, because it is a nature-based solution for mangrove restoration.

An In Vitro Validation of DIAGNOdent Versus Radiography for the Detection of Caries Underneath Different Types of Restorations.

Objective This study aimed to assess the validity of DIAGNOdent as a diagnostic device for the detection of secondary dental caries underneath different types of restorations. Methods A total of 60 extracted human permanent molars were used in this experimental study (30 sound teeth and 30 teeth with proximal caries); 20 teeth (10 sound and 10 carious) were randomly allocated into one of three restoration groups: composite, amalgam, or resin-modified glass ionomer (RMGI). All teeth were examined using both KaVo DIAGNOdent Classic and digital radiographic sensors. Results In the composite-restored teeth, DIAGNOdent showed excellent sensitivity (90%) and specificity (90%). On the other hand, digital radiography had high sensitivity (80%) and poor specificity (20%). In amalgam-restored teeth, DIAGNOdent showed low sensitivity (30%) and excellent specificity (100%), while radiographs showed good sensitivity (70%) and low specificity (30%). In the RMGI-restored teeth, DIAGNOdent had excellent sensitivity (100%) and 70% specificity, while digital radiography had poor sensitivity (30%) and excellent specificity (90%). Conclusions DIAGNOdent showed superior results in detecting secondary caries lesions underneath composite and RMGI restorations when compared to digital radiography. On the other hand, radiography emerged as a preferable method for the detection of secondary caries underneath amalgam restorations. Based on our findings, DIAGNOdent can be used in dental clinics for the early diagnosis of hidden secondary caries underneath composite and RMGI restorations.

Supinator to posterior interosseous nerve transfer to restore hand opening in brachial plexus and spinal cord injury: a systematic review and individual patient-data meta-analysis.

OBJECTIVE: Cervical spinal cord injury (SCI) and lower trunk brachial plexus injury (BPI) commonly result in hand paralysis. Although restoring hand function is complex and challenging to achieve, regaining volitional hand control drastically enhances functionality for these patients. The authors aimed to systematically review the outcomes of hand-opening function after supinator to posterior interosseous nerve (PIN) transfer. METHODS: A systematic literature review was performed according to the PRISMA guidelines. RESULTS: A total of 16 studies with 88 patients and 119 supinator to PIN transfers were included (87 transfers for SCI and 32 for BPI). In most studies, the time interval from injury to surgery was 6-12 months. Finger extension and thumb extension (Medical Research Council grade ≥ 3/5) recovered in 86.5% (103/119) and 78.1% (93/119) of cases, respectively, over a median follow-up of 19 months. The rates of recovery were similar for the SCI and BPI populations (finger extension, 87.3% in SCI and 84.3% in BPI; thumb extension, 75.8% in SCI and 84.3% in BPI). Type of injury (OR 1.05, 95% CI 0.17-6.4, p = 0.95), time from injury to surgery (OR 1.01, 95% CI 0.8-1.29, p = 0.88), and age (OR 0.97, 95% CI 0.90-1.06, p = 0.60) were not associated with odds of a successful outcome. Duration of follow-up was significantly associated with successful finger extension (OR 1.15, 95% CI 1.01-1.30, p = 0.026). No donor-associated supinator weakness was reported postoperatively given that patients had an intact bicep muscle preoperatively contributing to supination. CONCLUSIONS: Supinator to PIN transfer is a safe and effective procedure that can achieve successful restoration of digital extension in the SCI and BPI population at similar rates. Duration of follow-up was associated with superior outcomes, which was expected.

A decision support tool to help identify blue carbon sites for restoration.

Blue carbon ecosystems (BCEs), such as mangroves, saltmarshes, and seagrasses, are important nature-based solutions for climate change mitigation and adaptation but are threatened by degradation. Effective BCE restoration requires strategic planning and site selection to optimise outcomes. We developed a Geographic Information System (GIS)-based multi-criteria decision support tool to identify suitable areas for BCE restoration along the 2512 km-long coastline of Victoria, Australia. High-resolution spatial data on BCE distribution, coastal geomorphology, hydrodynamics, and land tenure were integrated into a flexible spatial model that distinguishes between passive and active restoration suitability. The tool was applied to identify high-priority locations for mangrove, saltmarsh, and seagrass restoration across different scenarios. Results indicate substantial potential for BCE restoration in Victoria, with 33,253 ha of suitable area identified, mostly (>97%) on public land, which aligned with the selection criteria used in the tool. Restoration opportunities are concentrated in bays and estuaries where historical losses have been significant. The mapped outputs provide a decision-support framework for regional restoration planning, while the tool itself can be adapted to other geographies. By integrating multiple spatial criteria and distinguishing between passive and active restoration, our approach offers a new method for targeting BCE restoration and informing resource allocation. The identified restoration potential will also require collaboration with coastal managers and communities, and consideration of socio-economic factors. With further refinements, such as incorporating multi-criteria decision analysis techniques, GIS-based tools can help catalyse strategic blue carbon investments and contribute to climate change mitigation and adaptation goals at different spatial scales. This study highlights the value of spatial identification for BCE restoration and provides a transferable framework for other regions.

Interdisciplinary Delphi study by PROSEC North America: Recommendations on single indirect restorations made from ceramic and nonmetallic biomaterials for posterior teeth.

OBJECTIVE: This article puts forward consensus recommendations from PROSEC North America regarding single indirect restorations made from ceramic and nonmetallic biomaterials in posterior teeth. OVERVIEW: The consensus process involved a multidisciplinary panel and three consensus workshops. A systematic literature review was conducted across five databases to gather evidence. The recommendations, informed by findings from systematic reviews and formulated based on a two-phase e-Delphi survey, emphasize a comprehensive treatment strategy that includes noninvasive measures alongside restorative interventions for managing dental caries and tooth wear. The recommendations advocate for selecting between direct and indirect restorations on a case-by-case basis, favoring inlays and onlays over crowns to align with minimally invasive dentistry principles. The recommendations highlight the critical role of selecting restorative biomaterials based on clinical performance, esthetic properties, and adherence to manufacturer guidelines. They emphasize the importance of precision in restorative procedures, including tooth preparation, impression taking, contamination control, and luting. Regular follow-up and maintenance tailored to individual patient needs are crucial for the longevity of ceramic and nonmetallic restorations. CONCLUSIONS: These PROSEC recommendations provide a framework for dental practitioners to deliver high-quality restorative care, advocating for personalized treatment planning and minimally invasive approaches to optimize oral health outcomes. CLINICAL SIGNIFICANCE: The PROSEC North America recommendations highlight the importance of minimally invasive techniques in posterior tooth restorations using ceramic and non-metallic biomaterials. These principles prioritize tooth structure conservation and personalized treatment planning, essential for enhancing clinical outcomes and long-term oral health.

Polyetheretherketone split post and core for restoration of multirooted molar with insufficient dental tissue remnants by digital techniques: a case report and 3-year follow up.

BACKGROUND: Multi-rooted teeth with extensive dental defects often face challenges in stability and biomechanical failure. High-performance polymer PEEK materials, with properties closer to dentin, show promise in reducing stress concentration and preserving tooth structure. This report aimed to explore the use of a highly retentive polyetheretherketone (PEEK) for manufacturing custom-made split post and core for the restoration of grossly destroyed endodontically treated molars. CLINICAL CONSIDERATIONS: A 40-year-old female patient presented with complaints of loss of tooth substance in the posterior mandibular tooth. This case involved the digital design and fabrication of PEEK split post and core to restore multirooted molar with insufficient dental tissue remnants. The restorations were evaluated over a 3-year follow-up using the World Federation criteria (FDI). The restoration was clinically evaluated through intraoral examination, radiographic assessment, and subjective patient satisfaction, and was deemed clinically good according to FDI criteria. CONCLUSION: The outstanding mechanical properties of PEEK, coupled with the structure of the split post, provide an effective treatment option for weakened multirooted teeth. Simultaneously, the restoration configuration effectively addressed the challenge of varying postinsertion directions, and the interlocking mechanism between the primary and auxiliary posts enhanced the stability of the post and core.

Aesthetic and Functional Rehabilitation for Dentogingival Asymmetry Using Zirconia Restorations.

In an effort to improve dentogingival aesthetics, scientific research has been developing non-surgical techniques and dental restorative materials. A 45-year-old female reported to the hospital with a complaint of an unpleasant aesthetic in the anterior region of the maxilla. She has an irregular contour of the gingiva in her anterior region and no temporomandibular problems. There is a history of trauma, but she did not take any treatment for it, which caused discolouration. Plaque index was retained by the surface roughness. Due to this reason, the patient's appearance, self-esteem, and quality of life have decreased. The purpose of this case is to provide a system-based clinical example of oral rehabilitation for anterior teeth. The patient didn't like the way she looked, and hence aesthetic and functional rehabilitation was planned. Treating the dentogingival asymmetry was the first step in the therapeutic approach. An in-ceram zirconia permanent porcelain metal-free crown was positioned after the temporary crowns were cemented into place. It should be mentioned that in clinical situations, the integration of periodontal and prosthetic treatment is crucial. Additionally, it is stated that the in-ceram zirconia system can produce satisfactory results when applied appropriately. For the main anterior teeth, zirconia crowns have offered an alternate treatment option that addresses aesthetic concerns and facilitates the installation of extra-coronal restorations. This article describes a case involving the aesthetic and functional restoration of severely damaged maxillary incisors using zirconia crowns.

Razor clam (Pinna bicolor) structural mimics as drivers of epibenthic biodiversity; a manipulative experiment.

Shellfish ecosystems facilitate important ecological functions and communities, but overexploitation and mismanagement have contributed to their decline worldwide. Within recent decades, coastal management efforts have increasingly sought to understand and reinstate valuable ecological functions provided by habitat-forming bivalves including oysters, mussels and pinnids. However, many bivalve species are critically understudied, limiting restoration and ecological engineering opportunities. Pinnids, specifically, are an underappreciated bivalve group, with razor clams (Pinna bicolor) forming dense aggregations, and potentially supporting important ecological functions. This study, conducted in an urban Australian estuary, was a manipulative experiment that investigated whether artificial razor clam shells could facilitate beneficial ecological functions through the provision of structural habitat. Specifically, we investigated the influence of intertidal benthic structures, including the micro-habitat influences of surface structure associated with mortality status (open or closed shell), and the short-term response of the benthic and epifaunal communities. Within 12 weeks, the structural razor clam mimics rapidly changed the aboveground ecological community, relative to the bare habitat controls. Both open and closed artificial shells provided a settlement surface for epiphytic organisms and supported enhanced epifaunal biodiversity. Contrastingly, the artificial structures did not significantly alter sediment characteristics or infaunal macroinvertebrate composition in the surrounding benthos. These results provide important insights into the rapid ecological response to the installation of intertidal pinnid structures in dynamic estuarine ecosystems. Furthermore, we provide a case study for understanding the ecological functions of an understudied habitat-forming species, which could be used to inform future restoration and management efforts.

Degree of conversion and interfacial adaptation of touch-cure resin cement polymerized by self-curing or dual-curing with reduced light.

OBJECTIVES: The first aim of this study was to determine whether there is a difference in degree of conversion (DC) of touch-cure cements polymerized by self-curing with adhesive or dual-curing under reduced light. The second aim was to compare interfacial adaptation of zirconia restoration cemented using touch-cure cements self-cured or dual-cured by reduced light. METHODS: The DC of touch-cure resin cements with adhesive was measured continuously using Fourier transform infrared spectrometry. Experimental groups differed depending on touch-cure cement. Each group had three subgroups of polymerization method. For subgroup 1, the DC was measured by self-curing. For subgroups 2 and 3, the DCs were measured by dual-curing with reduced light penetrating 3 mm and 1 mm zirconia blocks, respectively. For interfacial adaptation evaluation, Class I cavity was prepared on an extracted third molar, and zirconia restoration was fabricated. The restoration was cemented using the same cement. Groups and subgroups for interfacial adaptation were the same as those of the DC measurement. After thermo-cycling, interfacial adaptation at the tooth-restoration interface was evaluated using swept-source optical coherence tomography imaging. RESULTS: The DC of touch-cure cement differed depending on the measurement time, resin cement, and polymerization method (p < 0.05). Interfacial adaptation was different depending on the resin cement and polymerization method (p < 0.05). CONCLUSION: For touch-cure cement, light-curing with higher irradiance presented a higher DC and superior interfacial adaptation than light-curing with lower irradiance or self-curing. CLINICAL RELEVANCE: Although some adhesives accelerate the self-curing of touch-cure cement, light-curing for touch-cure cement is necessary for zirconia cementation.

Restorative and patient factors associated with repeat general anesthesia for dental treatments in young children: A case-control study.

BACKGROUND: The aim of this study was to assess factors associated with higher odds of undergoing repeat general anesthesia (GA2) for dental treatments. METHODS: The authors studied children up to age 48 months of age enrolled in Medicaid who underwent dental treatment under first general anesthesia (GA1). The authors used a case-control design to compare children who had a GA2 within 48 months of GA1 (case patients) with those who did not (control patients). RESULTS: In total, 60 case patients were age and sex matched to 120 control patients. Mean (SD) age at GA1 was 38 (5.2) months for case participants and 40 (4.7) months for control participants (P = .08). Higher caries involvement of maxillary incisors (P = .04), and lower caries involvment of canines (P = .003), first molars (P = .012), and second molars (P < .001) at GA1 was associated with higher odds of occurrence of GA2. There was a significant inverse association between full-coverage restoration on canines (P = .003), first molars (P = .001), and second molars (P = .002) at GA1 and occurrence of GA2. There was a significant direct association between the use of composites or sealants on second molars in GA1 and occurrence of GA2 (P = .02). The number of extractions at GA1 was not associated significantly with the occurrence of GA2. CONCLUSIONS: The use of full-coverage restorations on primary molars and canines under general anesthesia (GA) was associated with lower odds of occurrence of GA2. Resin restorations and sealants on primary second molars were associated with higher odds of occurrence repeat GA. The findings support preferential use of full-coverage restorations for young children undergoing dental GA. PRACTICAL IMPLICATIONS: Full-coverage restorations should be considered strongly for young children undergoing GA for dental treatments to reduce the risk of requiring GA2.