General Design of Aligned-Channel Porous Carbon Electrodes for Efficient High-Current-Density Gas-Evolving Electrocatalysis.

Gas-evolving reactions (GERs) are important in many electrochemical energy conversion technologies and chemical industries. The operation of GERs at high current densities is critical for their industrial implementation but remains challenging as it poses stringent requirements on the electrodes in terms of reaction kinetics, mass transfer, and electron transport. Here the general and rational design of self-standing carbon electrodes with vertically aligned porous channels, appropriate pore size distribution, and high surface area as supports for loading a variety of catalytic species by facile electrodeposition are reported. These electrodes simultaneously possess high intrinsic activity, large numbers of active sites, and efficient transport highways for ions, gases, and electrons, resulting in significant performance improvements at high current densities in diverse GERs such as urea oxidation, hydrogen evolution, and oxygen evolution reactions, as well as overall urea/water electrolyzers. As an example, the carbon electrode decorated with Ni(OH)2 demonstrates a record-high current density of 1000 mA cm-2 at 1.360 V versus the reversible hydrogen electrode, largely outperforming the conventional nickel foam-based counterpart and the state-of-the-art electrodes.

Simultaneously Boosting Direct and Indirect Urea Oxidation of Nickel Hydroxide via Strategic Yttrium Doping.

Urea electrolysis can address pressing environmental concerns caused by urea-containing wastewater while realizing energy-saving hydrogen production. Highly efficient and affordable electrocatalysts are indispensable for realizing the great potential of this emerging technology. Among the numerous candidates, α-Ni(OH)2 has the merits of good electrocatalytic activity, adjustable heteroelement doping, and low cost; consequently, it has received tremendous attention in the electrolytic fields. Herein, a Y3+-doping strategy is developed to effectively enhance the catalytic performance of nickel hydroxide in the urea oxidation reaction (UOR). Our results show that Y3+ incorporation successfully modulates the electronic structure of α-Ni(OH)2 by inducing Ni3+ formation in the crystal lattice to initiate direct UOR, facilitates the Ni3+/Ni2+ redox transition with higher current responses to promote indirect UOR, and maintains the structural stability of YNi-10 (Ni2+/Y3+ molar ratio = 1:0.1) during long-term UOR operation. Owing to these features, the obtained YNi-10 sample exhibits a higher current density (127 vs 79 mA cm-2 at 1.5 V), a lower Tafel slope (48 vs 75 mV dec-1), a larger potential difference between the UOR and oxygen evolution reaction (OER, 0.26 vs 0.22 V at 80 mA cm-2), a higher reaction rate constant (1.1 × 105 vs 3.1 × 103 cm3 mol-1 s-1), and a reduced activation energy of UOR (2.9 vs 14.8 kJ mol-1) compared with the Y-free counterpart (YNi-0). This study presents a promising strategy to simultaneously boost direct and indirect UORs, providing new insights for further developing high-performance electrocatalysts.

Vanadium-Doped Ni3S2: Morphological Evolution for Enhanced Industrial-Scale Water and Urea Electrolysis.

We report the V-Ni3S2 self-supported catalytic network with optimized morphology grown directly on nickel foam (NF) by the one-step hydrothermal technique for water and urea electrolysis at industrial scale hydrogen generation. The morphology of Ni3S2 was modulated by doping of different concentrations of vanadium from granules to cross-linked wires to hierarchal nanosheets arrays, which is beneficial in electrochemical charge and mass transport, and generates more exposed active sites. The V-Ni3S2 catalyst requires the overpotential of 147 mV for hydrogen evolution reaction (HER). The OER and UOR half-cell reaction on V-Ni3S2 catalyst requires potential 1.57 V and 1.39 V (vs RHE), respectively to generate current 100 mA/cm2. The water electrolysis cell developed by V-Ni3S2 as both anode and cathode generates 100 mA/cm2 at cell voltage of 1.88 V in laboratory condition (1M KOH, 25°C) and 1.61 V at industrial condition (5M KOH, 80°C) and also shows considerable stability for 82hr at current 300 mA/cm2. The urea electrolysis cell with 1M KOH and 0.33 M urea generates 100 mA/cm2 at a cell voltage of 1.73 V, which is 150 mV less than that required for water electrolysis and demonstrate stability for 85hr at a current of 100 mA/cm2.

Photo-Excited High-Spin State Ni (III) Species in Mo-Doped Ni3S2 for Efficient Urea Oxidation Reaction.

Designing robust catalysts for increasing the sluggish kinetics of the urea oxidation reaction (UOR) is challenging. Herein, the regulation of spin states for metal active sites by photoexcitation to facilitate the adsorption of urea and intermediates is demonstrated. Mo-doped nickel sulfide nanoribbon arrays (Mo-Ni3S2@NMF) with excellent light-trapping capacity are successfully prepared. Under AM 1.5G illumination, the activity of the Mo-Ni3S2@NMF exhibits a 50% improvement in the UOR current. Compared with those under dark conditions, Mo-Ni3S2@NMF achieve 10 mA cm-2 at 1.315 VRHE for UOR and 1.32 Vcell for urea electrolysis, which are decreases of 15 and 80 mV, respectively. The electron spin resonance, in situ Fourier transform infrared spectroscopy analysis and density functional theory calculations reveal that illumination led to the formation of Ni3+ active sites in a high-spin state, which strengthens the d-p orbital hybridization of Ni-N, hence facilitating the adsorption of urea. C─N cleavage of the *CONN intermediate is further inhibited, which promotes the oxidation of urea molecules via the active N2 pathway, thereby accelerating the UOR rate.

P-NiFe2O4/N-Doped Carbon Nanotubes/NiFe Multi-Phase Heterojunctions for Overall Water Splitting and Urea Electrolysis.

The design and construction of highly efficient electrocatalysts for overall water splitting and urea electrolysis are significantly important for promoting energy conversion and realizing green hydrogen production. In this work, we constructed a multi-phase heterojunction through a simple hydrothermal and phosphorization process. The P-doped NiFe2O4 (P-NiFe2O4) nanoparticles were uniformly anchored on the bamboo-like N-doped carbon nanotubes (NCNTs) grown via a NiFe-alloy autocatalysis. The electronic structure and coordination environment of active species were optimized by the synergistic action of P doping, well-dispersed ultrafine NiFe2O4, and NCNTs matrix with good conductivity, enhancing their quantity and activity for electrocatalysis. Consequently, the P-NiFe2O4/NCNTs/NiFe exhibits excellent HER and OER activities with an overpotential of 111 and 266 mV at 10 mA cm-2 in 1 M KOH, respectively. The symmetrical overall water-splitting cell using P-NiFe2O4/NCNTs/NiFe as both anode and cathode delivers 10 mA cm-2 at a voltage of 1.604 V in 1 M KOH. Notably, the two-electrode cell requires a low voltage of 1.467 V to achieve a current density of 10 mA cm-2 in 1 M KOH solution with 0.6 M urea. This designed catalysts display outstanding reaction kinetics and catalytic stability. This work provides useful guidance for applying transition metal-based catalysts for hydrogen production.

Boosting Urea-Assisted Natural Seawater Electrolysis in 3D Leaf-Like Metal-Organic Framework Nanosheet Arrays Using Metal Node Engineering.

Metal node engineering, which can optimize the electronic structure and modulate the composition of poor electrically conductive metal-organic frameworks, is of great interest for electrochemical natural seawater splitting. However, the mechanism underlying the influence of mixed-metal nodes on electrocatalytic activities is still ambiguous. Herein, a strategic design is comprehensively demonstrated in which mixed Ni and Co metal redox-active centers are uniformly distributed within NH2-Fe-MIL-101 to obtain a synergistic effect for the overall enhancement of electrocatalytic activities. Three-dimensional mixed metallic MOF nanosheet arrays, consisting of three different metal nodes, were in situ grown on Ni foam as a highly active and stable bifunctional catalyst for urea-assisted natural seawater splitting. A well-defined NH2-NiCoFe-MIL-101 reaches 1.5 A cm-2 at 360 mV for the oxygen evolution reaction (OER) and 0.6 A cm-2 at 295 mV for the hydrogen evolution reaction (HER) in freshwater, substantially higher than its bimetallic and monometallic counterparts. Moreover, the bifunctional NH2-NiCoFe-MIL-101 electrode exhibits eminent catalytic activity and stability in natural seawater-based electrolytes. Impressively, the two-electrode urea-assisted alkaline natural seawater electrolysis cell based on NH2-NiCoFe-MIL-101 needs only 1.56 mV to yield 100 mA cm-2, much lower than 1.78 V for alkaline natural seawater electrolysis cells and exhibits superior long-term stability at a current density of 80 mA cm-2 for 80 h.

Mechanistic Analysis of Urea Electrooxidation Pathways: Key to Rational Catalyst Design.

Urea electrolysis is an emerging approach to treating urea-enriched wastewater and an attractive alternative anodic process to the oxygen evolution reaction (OER) in electrochemical clean energy conversion and storage technologies (e. g., hydrogen production and CO2 electroreduction). While the thermodynamic potential for urea oxidation to dinitrogen is quite low compared to that of the OER, the catalysts reported to date require high overpotentials that far exceed those for the OER. Consequently, there is much room for improvement and rational catalyst design for the urea oxidation reaction (UOR). At the same time, due to the urea molecule having a more complex structure than water, UOR can lead to the formation of various products beyond the commonly assumed N2 and CO2. This concept article will critically assess recent efforts of the research community to decipher the formation mechanisms of UOR products focusing on the systematic analysis of the reaction selectivity. This work aims to analyze the current state of the art and identify existing gaps, providing an outlook for the future design of UOR catalysts with superior activity and selectivity by applying the knowledge of the molecular transformation mechanisms.

In Situ Assembly of a Superaerophobic CoMn/CuNiP Heterostructure as a Trifunctional Electrocatalyst for Ampere-Level Current Density Urea-Assisted Hydrogen Production.

Urea electrolysis is a promising energy-efficient hydrogen production process with environmental benefits, but the lack of efficient and sustainable ampere-level current density electrocatalysts fabricated through simple methods is a major challenge for commercialization. Herein, we present an efficient and stable heterostructure electrocatalyst for full urea and water electrolysis in a convenient and time-efficient preparation manner. Overall, superhydrophilic/superaerophobic CoMn/CuNiP/NF exhibits exceptional performance for the hydrogen evolution reaction (HER) (-33.8, -184.4, and -234.8 mV at -10, -500, and -1000 mA cm-2, respectively), urea electro-oxidation reaction (UOR) [1.28, 1.43, and 1.51 V (vs RHE) at 10, 500, and 1000 mA cm-2, respectively], and oxygen evolution reaction (OER) [1.45, 1.67, and 1.74 V (vs RHE) at 10, 500, and 1000 mA cm-2, respectively]. Moreover, the superaerophobic CoMn/CuNiP/NF demonstrates promising potential in full urea (1.33, 1.57, and 1.60 V at 10, 500, and 1000 mA cm-2, respectively) and water (1.46 V, 1.78, and 1.86 at 10, 500, and 1000 mA cm-2, respectively) electrolysis. Based on X-ray photoelectron spectroscopy results, it was determined that the surface of the CoMn/CuNiP electrode was rich in redox pairs such as Ni2+/Ni3+, Cu+/Cu2+, Co2+/Co3+, and Mn2+/Mn3+, which are crucial for the formation of active sites for the OER and UOR, such as NiOOH, MnOOH, and CoOOH, thereby enhancing the catalytic activity. Besides, the in situ assembled CoMn/CuNiP/NF displayed highly stable performance for HER, OER, and UOR with high Faradaic efficiency for over 500 h. This research offers a simple and efficient method for manufacturing a high-efficiency and stable trifunctional electrocatalyst capable of delivering ampere-level current density in urea-assisted hydrogen production. Our density functional theory calculations reveal the potential of CoMn/CuNiP as an effective catalyst, enhancing the electronic properties and catalytic performance. The near-zero Gibbs free-energy change for HER underscores its promise, while reduced CO2 desorption energies and charge redistribution support efficient UOR. These findings signify CoMn/CuNiP's potential for electrochemical applications.

Engineering advanced noble-metal-free electrocatalysts for energy-saving hydrogen production from alkaline water via urea electrolysis.

When the anodic oxygen evolution reaction (OER) of water splitting is replaced by the urea oxidation reaction (UOR), the electrolyzer can fulfill hydrogen generation in an energy-economic manner for urea electrolysis as well as sewage purification. However, owing to the sluggish kinetics from a six-electron process for UOR, it is in great demand to design and fabricate high-performance and affordable electrocatalysts. Over the past years, numerous non-precious materials (especially nickel-involved samples) have offered huge potential as catalysts for urea electrolysis under alkaline conditions, even in comparison with frequently used noble-metal ones. In this review, recent efforts and progress in these high-efficiency noble-metal-free electrocatalysts are comprehensively summarized. The fundamentals and principles of UOR are first described, followed by highlighting UOR mechanism progress, and then some discussion about density functional theory (DFT) calculations and operando investigations is given to disclose the real reaction mechanism. Afterward, aiming to improve or optimize UOR electrocatalytic properties, various noble-metal-free catalytic materials are introduced in detail and classified into different classes, highlighting the underlying activity-structure relationships. Furthermore, new design trends are also discussed, including targetedly designing nanostructured materials, manipulating anodic products, combining theory and in situ experiments, and constructing bifunctional catalysts. Ultimately, we point out the outlook and explore the possible future opportunities by analyzing the remaining challenges in this booming field.

Self-Supported Mn-Ni3Se2 Electrocatalysts for Water and Urea Electrolysis for Energy-Saving Hydrogen Production.

Recently, there has been a huge research interest in developing robust, efficient, low-cost, and earth-abundant materials for water and urea electrolysis for hydrogen (H2) generation. Herein, we demonstrate the facile hydrothermal synthesis of self-supported Mn-Ni3Se2 on Ni foam for overall water splitting under wide pH conditions. With the optimized concentration of Mn in Ni3Se2, the overpotential for hydrogen evolution, oxygen evolution, and urea oxidation is significantly reduced by an enhanced electrochemical active surface area. Different electronic states of metal elements also produce a synergistic effect, which accelerates the rate of electrochemical reaction for water and urea electrolysis. Owing to the chemical robustness, Mn-doped Ni3Se2 shows excellent stability for long time duration, which is important for its practical applications. A two-electrode electrolyzer exhibits low cell voltages of 2.02 and 1.77 V for water and urea electrolysis, respectively, to generate a current density of 100 mA/cm2. Finally, the prepared nanostructured Mn-Ni3Se2@NF acts as an electrocatalyst for overall water splitting under wide pH conditions and urea electrolysis for energy-saving hydrogen production and wastewater treatment.

Identifying And Unveiling the Role of Multivalent Metal States for Bidirectional UOR and HER Over Ni, Mo-Trithiocyanuric Based Coordination Polymer.

Urea oxidation reaction (UOR), an ideal alternative to oxygen evolution reaction (OER), has received increasing attention for realizing energy-saving H2 production and relieving pollutant degradation. Normally, most studied Ni-based UOR catalysts pre-oxidate to NiOOH and then act as active sites. However, the unpredictable transformation of the catalyst's structure and its dissolution and leaching, may complicate the accuracy of mechanism studies and limit its further applications. Herein, a novel self-supported bimetallic Mo-Ni-C3 N3 S3 coordination polymers (Mo-NT@NF) with strong metal-ligand interactions and different H2 O/urea adsorption energy are prepared, which realize a bidirectional UOR/hydrogen evolution reaction (HER) reaction pathway. A series of Mo-NT@NF is prepared through a one-step mild solvothermal method and their multivalent metal states and HER/UOR performance relationship is evaluated. Combining catalytic kinetics, in situ electrochemical spectroscopic characterization, and density-functional theory (DFT) calculations, a bidirectional catalytic pathway is proposed by N, S-anchored Mo5+ and reconstruction-free Ni3+ sites for catalytic active center of HER and UOR, respectively. The effective anchoring of the metal sites and the fast transfer of the intermediate H* by N and S in the ligand C3 N3 S3 H3 further contribute to the fast kinetic catalysis. Ultimately, the coupled HER||UOR system with Mo-NT@NF as the electrodes can achieve energy-efficient overall-urea electrolysis for H2 production.

Exploring The Synergistic Effect Of CoSeP/CoP Interface Catalyst For Efficient Urea Electrolysis.

Electrocatalytic oxidation of urea (UOR) is a potential energy-saving hydrogen production technology that can replace oxygen evolution reaction (OER). Therefore, CoSeP/CoP interface catalyst is synthesized on nickel foam using hydrothermal, solvothermal, and in situ template methods. The strong interaction of tailored CoSeP/CoP interface promotes the hydrogen production performance of electrolytic urea. During the hydrogen evolution reaction (HER), the overpotential can reach 33.7 mV at 10 mA cm-2 . The cell voltage can reach 1.36 V at 10 mA cm-2 in the overall urea electrolytic process. Notably, the overall urine electrolysis performance of the catalyst in the human urine medium can reach 1.40 V at 10 mA cm-2 and can exhibit durable cycle stability at 100 mA cm-2 . Density functional theory (DFT) proves that the CoSeP/CoP interface catalyst can better adsorb and stabilize reaction intermediates CO* and NH* on its surface through a strong synergistic effect, thus enhancing the catalytic activity.

In-Site Grown NiFeOOH Nanosheets Foam Directly as Robust Electrocatalyst for Efficient Urea Oxidation Application.

In this work, a series of morphology-controlled NiFeOOH nanosheets were directly developed through a one-step mild in-situ acid-etching hydrothermal process. Benefiting from the ultrathin interwoven geometric structure and most favorable electron transport structure, the NiFeOOH nanosheets synthesized under 120 °C (denoted as NiFe_120) exhibited the optimal electrochemical performance for urea oxidation reaction (UOR). An overpotential of merely 1.4 V was required to drive the current density of 100 mA cm-2 , and the electrochemical activity remains no change even after 5000 cycles' accelerated degradation test. Moreover, the assembled urea electrolysis set by using the NiFe_120 as bifunctional catalysts presented a reduced potential of 1.573 V at 10 mA cm-2 , which was much lower than that of overall water splitting. We believe this work will lay a foundation for developing high-performance urea oxidation catalysts for the large-scale production of hydrogen and purification of urea-rich sewage.

Superwettable and photothermal all-in-one electrocatalyst for boosting water/urea electrolysis.

Developing multifunctional all-in-one electrocatalysts for energy-saving hydrogen generation remains a challenge. In this study, a simple and feasible thermal phosphorization strategy is explored to rationally construct P-doped MoO2-NiMoO4 heterostructure on nickel foam (NF). The heterointerfaced P-MoO2-NiMoO4/NF can simultaneously realize the integrated all-in-one functionalities, innovatively introducing superwettable surfaces, photothermal conversion capabilities and electrocatalytic functions. The superwettability gives P-MoO2-NiMoO4/NF sufficient electrolyte permeation and smooth bubble detachment. The plasmonic MoO2 with photothermal performance greatly elevates the local surface temperature of in P-MoO2-NiMoO4/NF, which is conducive to improve the electrocatalytic efficiency. The favorable in-situ surface reconstruction brings abundant active sites for electrocatalytic reactions. As an advanced multifunctional electrocatalyst, the superwettable and photothermal P-MoO2-NiMoO4/NF exhibits significantly improved performances in oxygen evolution reaction (OER) and urea oxidation reaction (UOR). More importantly, the highly efficient and stable overall water-urea electrolysis assisted by photothermal fields can be simply achieved by exposing P-MoO2-NiMoO4/NF to near-infrared (NIR) light.

Construction of Nitrogen-Doped Biphasic Transition-Metal Sulfide Nanosheet Electrode for Energy-Efficient Hydrogen Production via Urea Electrolysis.

Urea-assisted hybrid water splitting is a promising technology for hydrogen (H2 ) production, but the lack of cost-effective electrocatalysts hinders its extensive application. Herein, it is reported that Nitrogen-doped Co9 S8 /Ni3 S2 hybrid nanosheet arrays on nickel foam (N-Co9 S8 /Ni3 S2 /NF) can act as an active and robust bifunctional catalyst for both urea oxidation reaction (UOR) and hydrogen evolution reaction (HER), which could drive an ultrahigh current density of 400 mA cm-2 at a low working potential of 1.47 V versus RHE for UOR, and gives a low overpotential of 111 mV to reach 10 mA cm-2 toward HER. Further, a hybrid water electrolysis cell utilizing the synthesized N-Co9 S8 /Ni3 S2 /NF electrode as both the cathode and anode displays a low cell voltage of 1.40 V to reach 10 mA cm-2 , which can be powered by an AA battery with a nominal voltage of 1.5 V. The density functional theory (DFT) calculations decipher that N-doped heterointerfaces can synergistically optimize Gibbs free energy of hydrogen and urea, thus accelerating the catalytic kinetics of HER and UOR. This work significantly advances the development of the promising cobalt-nickel-based sulfide as a bifunctional electrocatalyst for energy-saving electrolytic H2 production and urea-rich innocent wastewater treatment.

The polyoxometalates mediated preparation of phosphate-modified NiMoO4-x with abundant O-vacancies for H2 production via urea electrolysis.

It is urgent to develop non-noble metal electrocatalysts with both excellent activity and durable stability for H2 production via water electrolysis. Electric energy is mainly consumed by the sluggish anodic oxygen evolution reaction (OER). The electrocatalytic urea oxidation reaction (UOR) has been regarded as a promising reaction to replace OER because of its small thermodynamic oxidation potential. However, developing a facile and large-scale preparation method for bifunctional hydrogen evolution reaction (HER) and UOR electrocatalysts is still challenging. Herein, phosphate-modified (4.46 atomic%) NiMoO4-x net-like nanostructures are formed on Ni foam (NF) via H3PMo12O40 etching strategy at room temperature (denoted as NF/P-NiMoO4-x). The etched NF can directly serve as HER electrode, and delivers overpotential of 116 mV at current density of 10 mA/cm2 with Tafel slope of 77.5 mV/dec. Furthermore, it displays excellent UOR activity with potential of 1.359 V at current density of 10 mA/cm2 and Tafel slope of 19.3 mV/dec. The apparent activation energy of NF/P-NiMoO4-x is 20.6 kJ/mol, lower than that of NF (37.7 kJ/mol), indicating smaller apparent barrier for CN bond cleavage in urea. The cell voltage of urea electrolysis is around 1.48 V for H2 production to deliver current density of 10 mA/cm2, and better long-term stability for 50 h than that of Ir/C||Pt/C. The etching solution can be recycled for five times by addition of H2O2, turning heteropoly blue into its original state. This work develops a facile and large-scale method to prepare bifunctional HER and UOR electrocatalysts for H2 production in a less-energy saving way via urea electrolysis.

Highly efficient overall urea electrolysis via single-atomically active centers on layered double hydroxide.

Anodic urea oxidation reaction (UOR) is an intriguing half reaction that can replace oxygen evolution reaction (OER) and work together with hydrogen evolution reaction (HER) toward simultaneous hydrogen fuel generation and urea-rich wastewater purification; however, it remains a challenge to achieve overall urea electrolysis with high efficiency. Herein, we report a multifunctional electrocatalyst termed as Rh/NiV-LDH, through integration of nickel-vanadium layered double hydroxide (LDH) with rhodium single-atom catalyst (SAC), to achieve this goal. The electrocatalyst delivers high HER mass activity of 0.262 A mg-1 and exceptionally high turnover frequency (TOF) of 2.125 s-1 at an overpotential of 100 mV. Moreover, exceptional activity toward urea oxidation is addressed, which requires a potential of 1.33 V to yield 10 mA cm-2, endorsing the potential to surmount the sluggish OER. The splendid catalytic activity is enabled by the synergy of the NiV-LDH support and the atomically dispersed Rh sites (located on the Ni-V hollow sites) as evidenced both experimentally and theoretically. The self-supported Rh/NiV-LDH catalyst serving as the anode and cathode for overall urea electrolysis (1 mol L-1 KOH with 0.33 mol L-1 urea as electrolyte) only requires a small voltage of 1.47 V to deliver 100 mA cm-2 with excellent stability. This work provides important insights into multifunctional SAC design from the perspective of support sites toward overall electrolysis applications.

Recent Development of Nickel-Based Electrocatalysts for Urea Electrolysis in Alkaline Solution.

Recently, urea electrolysis has been regarded as an up-and-coming pathway for the sustainability of hydrogen fuel production according to its far lower theoretical and thermodynamic electrolytic cell potential (0.37 V) compared to water electrolysis (1.23 V) and rectification of urea-rich wastewater pollution. The new era of the "hydrogen energy economy" involving urea electrolysis can efficiently promote the development of a low-carbon future. In recent decades, numerous inexpensive and fruitful nickel-based materials (metallic Ni, Ni-alloys, oxides/hydroxides, chalcogenides, nitrides and phosphides) have been explored as potential energy saving monofunctional and bifunctional electrocatalysts for urea electrolysis in alkaline solution. In this review, we start with a discussion about the basics and fundamentals of urea electrolysis, including the urea oxidation reaction (UOR) and the hydrogen evolution reaction (HER), and then discuss the strategies for designing electrocatalysts for the UOR, HER and both reactions (bifunctional). Next, the catalytic performance, mechanisms and factors including morphology, composition and electrode/electrolyte kinetics for the ameliorated and diminished activity of the various aforementioned nickel-based electrocatalysts for urea electrolysis, including monofunctional (UOR or HER) and bifunctional (UOR and HER) types, are summarized. Lastly, the features of persisting challenges, future prospects and expectations of unravelling the bifunctional electrocatalysts for urea-based energy conversion technologies, including urea electrolysis, urea fuel cells and photoelectrochemical urea splitting, are illuminated.

Urea-oxidation-assisted electrochemical water splitting for hydrogen production on a bifunctional heterostructure transition metal phosphides combining metal-organic frameworks.

Electrocatalyzed urea-assisted wastewater splitting is a promising approach for sustainable hydrogen production. However, the lack of cost-efficient electrocatalysts hinders its practical application. Herein, bimetal phosphide (NiCoPx) nanowire arrays decorated with ultrathin NiFeCo metal-organic framework (NiFeCo-MOF) nanosheets on porous nickel foam (NF) were designed for urea-assisted wastewater splitting. The core-shell NiCoPx@NiFeCo-MOF hybrids were prepared via successive hydrothermal, gas-phase phosphorization and hydrothermal strategies. Encouragingly, the novel NiCoPx@NiFeCo-MOF/NF electrode served as an excellent bifunctional electrocatalyst for both the cathodic hydrogen evolution reaction (HER) and the anodic urea oxidation reaction (UOR) in urea-assisted water splitting, which merely required an overpotential of 44 mV to deliver a current density of 10 mA cm-2 for HER and a voltage of 1.37 V to deliver a current density of 100 mA cm-2 for UOR in 1.0 M KOH + 0.5 M urea. Benefiting from the highly exposed electroactive sites in exquisite three-dimensional (3D) hierarchical structure, multicomponent synergistic effect, accelerated electron transfer, easy electrolyte access and diffusion of released gas bubbles, the as-fabricated NiCoPx@NiFeCo-MOF/NF exhibited outstanding electrocatalytic performance. The mechanism of water splitting was elucidated by density functional theory calculations. Interestingly, NiFeCo-MOF possessed optimized COO* adsorption ability on Ni sites that were beneficial to UOR intermediates. More significantly, this work paves the way for the design and fabrication of bifunctional electrocatalysts for urea-containing wastewater treatment and sustainable hydrogen production.

Nickel-Catalyzed Urea Electrolysis: From Nitrite and Cyanate as Major Products to Nitrogen Evolution.

The electrochemical urea oxidation reaction (UOR) to N2 represents an efficient route to simultaneous nitrogen removal from N-enriched waste and production of renewable fuels at the cathode. However, the overoxidation of urea to NOx - usually dominates over its oxidation to N2 at Ni(OH)2 -based anodes. Furthermore, detailed reaction mechanisms of UOR remain unclear, hindering the rational catalyst design. We found that UOR to NOx - on Ni(OH)2 is accompanied by the formation of near stoichiometric amount of cyanate (NCO- ), which enabled the elucidation of UOR mechanisms. Based on our experimental and computational findings, we show that the formation of NOx - and N2 follows two distinct vacancy-dependent pathways. We also demonstrate that the reaction selectivity can be steered towards N2 formation by altering the composition of the catalyst, e.g., doping the catalyst with copper (Ni0.8 Cu0.2 (OH)2 ) increases the faradaic efficiency of N2 from 30 % to 55 %.