Rhodium-Promoted C-H Activation/Annulation between DNA-Linked Terminal Alkyne and Aromatic Acid: A Finding from the Selection Outcomes.

Inspired by previous selection outcomes, we investigated and developed a rhodium-promoted C-H activation/annulation reaction of DNA-linked terminal alkynes and aromatic acids. This reaction exhibits excellent efficiency with high conversions and a broad substrate scope. Most importantly, the unique DEL-compatible conditions provide a better scenario for yielding an isocoumarin scaffold compared to conventional organic reaction conditions, and this newly developed on-DNA method has confirmed its feasibility in preparing DNA-encoded libraries.

Utilization of Spontaneous Alkyne-Gold Self-Assembly Chemistry as an Alternative Method for Fabricating Electrochemical Aptamer-Based Sensors.

Electrochemical aptamer-based (E-AB) sensors are a promising class of biosensors which use structure-switching redox-labeled oligonucleotides (aptamers) codeposited with passivating alkanethiol monolayers on electrode surfaces to specifically bind and detect target analytes. Signaling in E-AB sensors is an outcome of aptamer conformational changes upon target binding, with the sequence of the aptamer imparting specificity toward the analyte of interest. The change in conformation translates to a change in electron transfer between the redox label attached to the aptamer and the underlying electrode and is related to analyte concentration, allowing specific electrochemical detection of nonelectroactive analytes. E-AB sensor measurements are reagentless with time resolutions of seconds or less and may be miniaturized into the submicron range. Traditionally these sensors are fabricated using thiol-on-gold chemistry. Here we present an alternate immobilization chemistry, gold-alkyne binding, which results in an increase in sensor lifetimes under ideal conditions by up to ∼100%. We find that gold-alkyne binding is spontaneous and supports efficient E-AB sensor signaling with analytical performance characteristics similar to those of thiol generated monolayers. The surface modification differs from gold-thiol binding only in the time and aptamer concentration required to achieve similar aptamer surface coverages. In addition, alkynated aptamers differ from their thiolated analogues only by their chemical handle for surface attachment, so any existing aptamers can be easily adapted to utilize this attachment strategy.

Are Terminal Alkynes Necessary for MAO-A/MAO-B Inhibition? A New Scaffold Is Revealed.

A versatile family of quaternary propargylamines was synthesized employing the KA2 multicomponent reaction, through the single-step coupling of a number of amines, ketones, and terminal alkynes. Sustainable synthetic procedures using transition metal catalysts were employed in all cases. The inhibitory activity of these molecules was evaluated against human monoaminoxidase (hMAO)-A and hMAO-B enzymes and was found to be significant. The IC50 values for hMAO-B range from 152.1 to 164.7 nM while the IC50 values for hMAO-A range from 765.6 to 861.6 nM. Furthermore, these compounds comply with Lipinski's rule of five and exhibit no predicted toxicity. To understand their binding properties with the two target enzymes, key interactions were studied using molecular docking, all-atom molecular dynamics (MD) simulations, and MM/GBSA binding free energy calculations. Overall, herein, the reported family of propargylamines exhibits promise as potential treatments for neurodegenerative disorders, such as Parkinson's disease. Interestingly, this is the first time a propargylamine scaffold bearing an internal alkyne has been reported to show activity against monoaminoxidases.

Efficient conversion of hemoglobin to a non-vasoactive oxygen carrier by site-specific cross-linking with azido acyl methyl phosphates followed by bio-orthogonal CuAAC with a bis-alkyne.

While cross-linked hemoglobin tetramers are functional acellular oxygen carriers, their ability to scavenge endogenous nitric oxide (NO) by endothelial pore penetration results in adverse cardiovascular effects. Animal studies established that cross-linked human hemoglobins, chemically joined into a double protein, avoid NO scavenging, presumably due to their larger size preventing penetration into endothelial regions that produce NO. In the present report, we utilize azide-containing acyl phosphate reagents to form cross-linked hemoglobins then bio-orthogonally click-couple them with a bis-alkyne (CuAAC). The production of these larger oxygen-carrying hemoglobin conjugates is obtained in high yields through subunit-specific cross-linking between each ßLys82 ε-amino group. The methyl phosphate leaving groups provide electrostatically induced ß-subunit site-selectivity, producing azido-cross-linked hemoglobin that undergoes highly efficient CuAAC compared with previous cross-linkers. The acyl phosphates also efficiently cross-link both T-state and R-state hemoglobin. The resulting bis- and tris-tetrameric hemoglobin conjugates exhibit oxygen affinity and cooperativity that are comparable to those of the native protein. The hemoglobin derivatives from the process we describe can function as sources of oxygen in biomedical applications, such as in ex-vivo donor organ perfusion.

Advances in the Synthesis of Bioorthogonal Reagents: s-Tetrazines, 1,2,4-Triazines, Cyclooctynes, Heterocycloheptynes, and trans-Cyclooctenes.

Aligned with the increasing importance of bioorthogonal chemistry has been an increasing demand for more potent, affordable, multifunctional, and programmable bioorthogonal reagents. More advanced synthetic chemistry techniques, including transition-metal-catalyzed cross-coupling reactions, C-H activation, photoinduced chemistry, and continuous flow chemistry, have been employed in synthesizing novel bioorthogonal reagents for universal purposes. We discuss herein recent developments regarding the synthesis of popular bioorthogonal reagents, with a focus on s-tetrazines, 1,2,4-triazines, trans-cyclooctenes, cyclooctynes, hetero-cycloheptynes, and -trans-cycloheptenes. This review aims to summarize and discuss the most representative synthetic approaches of these reagents and their derivatives that are useful in bioorthogonal chemistry. The preparation of these molecules and their derivatives utilizes both classical approaches as well as the latest organic chemistry methodologies.

Multivalent dendritic DNA aptamer molecules for the enhancement of therapeutic effects.

Dendritic DNA molecules, referred to as DNA dendrons, consist of multiple covalently linked strands and are expected to improve the cellular uptake and potency of therapeutic oligonucleotides because of their multivalency. In this study, we developed an efficient synthetic method for producing DNA dendrons using strain-promoted azide-alkyne cycloaddition. Integration of the antitumor aptamer AS1411 into DNA dendrons enhanced cellular uptake and antiproliferative activity in cancer cells. These findings demonstrate that the incorporation of multivalent aptamers into DNA dendrons can effectively boost their therapeutic effects.

Functionalization of Siloxanes with Arynes Generated from o-Triazenylarylboronic Acids.

Herein, we report the functionalization of polyhedral oligosilsesquioxanes (POSS) and related siloxanes with arynes. Using o-triazenylarylboronic acids as aryne precursors and silica gel as the activator, the transformation of siloxane bearing various arynophilic moieties on the side chains was achieved with high yields without touching the siloxane core. This method was applied to the conjugation of POSS and pharmaceutical cores using an aryne derived from the synthetic intermediate of cabozantinib. Furthermore, orthogonal dual functionalization of POSS was realized by combining the aryne reaction with Huisgen cyclization.

Introducing terminal alkyne groups at the reducing end of cellulose nanocrystals by aldimine condensation for further click reaction.

In recent years, click reactions with cellulose nanocrystals (CNC) participation have gradually become a research hotspot. Carboxylamine condensation is the most used method to introduce terminal alkyne groups at the reducing end of CNC as reaction sites for click reactions. However, hydroxyl groups on CNC surface would be slightly oxidized during the carboxyamine condensation process, inducing the potential positions of introduced alkynes would be not only at the reducing end but also on CNC surface. Here, aldimine condensation was proposed to introduce terminal alkyne groups just at the reducing end of CNC, and a systematic comparison analysis was conducted with carboxylamine condensation. Firstly, the selectivity and extent of alkynylation were characterized by XPS and EA. Secondly, the end aldehyde content in these CNC samples was measured by the BCA method, which quantitatively explained the grafting efficiency of aldimine condensation and further verified its feasibility. Thirdly, the clickability of the modified CNC samples was confirmed through XPS analysis of the products after a pre-designed click reaction. In sum, aldimine condensation was proven to be a simple and effective strategy for introducing terminal alkyne groups at the reducing end of CNC, which could be used as reaction sites for further click reactions.

Super-Resolution Imaging of Clickable Lipids With Lipid Expansion Microscopy (LExM).

Fluorescent imaging of cellular membranes is challenged by the size of lipid bilayers, which are smaller than the diffraction limit of light. Recently, expansion microscopy (ExM) has emerged as an approachable super-resolution method that requires only widely accessible confocal microscopes. In this method, biomolecules of interest are anchored to hydrogel-based, polymeric networks that are expanded through osmosis to physically separate and resolve features smaller than the diffraction limit of light. Whereas ExM has been employed for super-resolution imaging of proteins, DNA, RNA, and glycans, the application of this method to the study of lipids is challenged by the requirement of permeabilization procedures that remove lipids and compromise the integrity of the membrane. Here, we describe our recently developed protocols for lipid expansion microscopy (LExM), a method that enables ExM of membranes without permeabilization. These detailed protocols and accompanying commentary sections aim to make LExM accessible to any experimentalist interested in imaging membranes with super-resolution. © 2024 Wiley Periodicals LLC. Basic Protocol 1: LExM of alkyne-choline lipids Basic Protocol 2: LExM of IMPACT-labeled lipids Basic Protocol 3: LExM of clickable cholesterol Basic Protocol 4: Determining the expansion factor.

Synthesis of a Side Chain Alkyne Analogue of Sitosterol as a Chemical Probe for Imaging in Plant Cells.

Clickable chemical tools are essential for studying the localization and role of biomolecules in living cells. For this purpose, alkyne-based close analogs of the respective biomolecules are of outstanding interest. Here, in the field of phytosterols, we present the first alkyne derivative of sitosterol, which fulfills the crucial requirements for such a chemical tool as follows: very similar in size and lipophilicity to the plant phytosterols, and correct absolute configuration at C-24. The alkyne sitosterol FB-DJ-1 was synthesized, starting from stigmasterol, which comprised nine steps, utilizing a novel alkyne activation method, a Johnson-Claisen rearrangement for the stereoselective construction of a branched sterol side chain, and a Bestmann-Ohira reaction for the generation of the alkyne moiety.

Comparison of feline and human immunodeficiency virus reverse transcriptase enzymes through chemical screening and computational analysis.

Feline immunodeficiency virus (FIV) is a common infection found in domesticated and wild cats worldwide. Despite the wealth of therapeutic understanding of the disease in humans, considerably less information exists regarding the treatment of the disease in felines. Current treatment relies on drugs developed for the related human immunodeficiency virus (HIV) and includes compounds of the popular non-nucleotide reverse transcriptase (NNRTI) class. This is despite FIV-RT being only 67% similar to HIV-1 RT at the enzyme level, increasing to 88% for the allosteric pocket targeted by NNRTIs. The goal of this project was to try to quantify how well the more extensive pharmacological knowledge available for human disease translates to felines. To this end we screened known NNRTIs and 10 diverse pyrimidine analogs identified virtually. We use this chemo-centric probe approach to (a) assess the similarity between the two related RT targets based on the observed experimental inhibition values, (b) try to identify more potent inhibitors at FIV, and (c) gain a better appreciation of the structure-activity relationships (SAR). We found the correlation between IC50s at the two targets to be strong (r2 = 0.87) and identified compound 1 as the most potent inhibitor of FIV with IC50 of 0.030 µM ± 0.009. This compared to FIV IC50 values of 0.22 ± 0.17 µM, 0.040 ± 0.010 µM and >160 µM for known anti HIV-1 RT drugs Efavirenz, Rilpivirine, and Nevirapine, respectively. This knowledge, along with an understanding of the structural origin that give rise to any differences could improve the way HIV drugs are repurposed for FIV.

Development of Novel Immobilized Copper-Ligand Complex for Click Chemistry of Biomolecules.

Copper-catalyzed azide-alkyne cycloaddition click (CuAAC) reaction is widely used to synthesize drug candidates and other biomolecule classes. Homogeneous catalysts, which consist of copper coordinated to a ligand framework, have been optimized for high yield and specificity of the CuAAC reaction, but CuAAC reaction with these catalysts requires the addition of a reducing agent and basic conditions, which can complicate some of the desired syntheses. Additionally, removing copper from the synthesized CuAAC-containing biomolecule is necessary for biological applications but inconvenient and requires additional purification steps. We describe here the design and synthesis of a PNN-type pincer ligand complex with copper (I) that stabilizes the copper (I) and, therefore, can act as a CuAAC catalyst without a reducing agent and base under physiologically relevant conditions. This complex was immobilized on two types of resin, and one of the immobilized catalyst forms worked well under aqueous physiological conditions. Minimal copper leaching was observed from the immobilized catalyst, which allowed its use in multiple reaction cycles without the addition of any reducing agent or base and without recharging with copper ion. The mechanism of the catalytic cycle was rationalized by density functional theory (DFT). This catalyst's utility was demonstrated by synthesizing coumarin derivatives of small molecules such as ferrocene and sugar.

Synthesis, in vitro Anti-HIV-1RT evaluation, molecular modeling, DFT and acute oral toxicity studies of some benzotriazole derivatives.

This study synthesized and evaluated a series of benzotriazole derivatives denoted 3(a-j) and 6(a-j) for their anti-HIV-1 RT activities compared to the standard drug efavirenz. Notably, compound 3 h, followed closely by 6 h, exhibited significant anti-HIV-1 RT efficacy relative to the standard drug. In vivo oral toxicity studies were conducted for the most active compound 3 h, confirming its nontoxic nature to ascertain the safety profile. By employing molecular docking techniques, we explored the potential interactions between the synthesized compounds (ligands) and a target biomolecule (protein)(PDB ID 1RT2) at the molecular level. We undertook the molecular dynamics study of 3 h, the most active compound, within the active binding pocket of the cocrystallized structure of HIV-1 RT (PDB ID 1RT2). We aimed to learn more about how biomolecular systems behave, interact, and change at the atomic or molecular level over time. Finally, the DFT-derived HOMO and LUMO orbitals, as well as analysis of the molecular electrostatic potential map, aid in discerning the reactivity characteristics of our molecule.

Modular Synthesis of PEG-Dendritic Block Copolymers by Thermal Azide-Alkyne Cycloaddition with Internal Alkynes and Evaluation of their Self-Assembly for Drug Delivery Applications.

Linear-dendritic block copolymers assemble in solution due to differences in the solubility or charge properties of the blocks. The monodispersity and multivalency of the dendritic block provide unparalleled control for the design of drug delivery systems when incorporating poly(ethylene glycol) (PEG) as a linear block. An accelerated synthesis of PEG-dendritic block copolymers based on the click and green chemistry pillars is described. The tandem composed of the thermal azide-alkyne cycloaddition with internal alkynes and azide substitution is revealed as a flexible, reliable, atom-economical, and user-friendly strategy for the synthesis and functionalization of biodegradable (polyester) PEG-dendritic block copolymers. The high orthogonality of the sequence has been exploited for the preparation of heterolayered copolymers with terminal alkenes and alkynes, which are amenable for subsequent functionalization by thiol-ene and thiol-yne click reactions. Copolymers with tunable solubility and charge were so obtained for the preparation of various types of nanoassemblies with promising applications in drug delivery.

A New Insight Into The Huisgen Reaction: Heterogeneous Copper Catalyzed Azide-Alkyne Cycloaddition for the Synthesis of 1,4-Disubstituted Triazole (From 2018-2023).

The Huisgen cycloaddition, often referred to as 1,3-Dipolar cycloaddition, is a well-established method for synthesizing 1,4-disubstituted triazoles. Originally conducted under thermal conditions [3+2] cycloaddition reactions were limited by temperature, prolonged reaction time, and regioselectivity. The introduction of copper catalyzed azide-alkyne cycloaddition (CuAAC) revitalized interest, giving rise to the concept of "click chemistry". The CuAAC has emerged as a prominent method for producing 1,2,3-triazole with excellent yields and exceptional regioselectivity even in unfavorable conditions. Copper catalysts conventionally facilitate azide-alkyne cycloadditions, but challenges include instability and recycling issues. In recent years, there has been a growing demand for heterogeneous and porous catalysts in various chemical reactions. Chemists have been more interested in heterogenous catalysts as a result of the difficulties in separating homogenous catalysts from reaction products. These catalysts are favored for their abundant active sites, extensive surface area, easy separation from reaction mixtures, and the ability to be reused. Heterogeneous catalysts have garnered significant attention due to their broad industrial utility, characterized by cost-effectiveness, stability, resistance to thermal degradation, and ease of removal compared to their homogeneous counterparts. The present review covers recent advancements from year 2018 to 2023 in the field of click reactions for obtaining 1,2,3-triazoles through Cu catalyzed 1,3-dipolar azide-alkyne cycloaddition and the properties of the catalyst, reaction conditions such as solvent, temperature, reaction time, and the impact of different heterogeneous copper catalysts on product yield.

Integrated study of antiretroviral drug adsorption onto calcined layered double hydroxide clay: experimental and computational analysis.

This study focused on the efficacy of a calcined layered double hydroxide (CLDH) clay in adsorbing two antiretroviral drugs (ARVDs), namely efavirenz (EFV) and nevirapine (NVP), from wastewater. The clay was synthesized using the co-precipitation method, followed by subsequent calcination in a muffle furnace at 500 °C for 4 h. The neat and calcined clay samples were subjected to various characterization techniques to elucidate their physical and chemical properties. Response surface modelling (RSM) was used to evaluate the interactions between the solution's initial pH, adsorbent loading, reaction temperature, and initial pollutant concentration. Additionally, the adsorption kinetics, thermodynamics, and reusability of the adsorbent were evaluated. The results demonstrated that NVP exhibited a faster adsorption rate than EFV, with both reaching equilibrium within 20-24 h. The pseudo-second order (PSO) model provided a good fit for the kinetics data. Thermodynamics analysis revealed that the adsorption process was spontaneous and exothermic, predominantly governed by physisorption interactions. The adsorption isotherms followed the Freundlich model, and the maximum adsorption capacities for EFV and NVP were established to be 2.73 mg/g and 2.93 mg/g, respectively. Evaluation of the adsorption mechanism through computational analysis demonstrated that both NVP and EFV formed stable complexes with CLDH, with NVP exhibiting a higher affinity. The associated adsorption energies were established to be -731.78 kcal/mol for NVP and -512.6 kcal/mol for EFV. Visualized non-covalent interaction (NCI) graphs indicated that hydrogen bonding played a significant role in ARVDs-CLDH interactions, further emphasizing physisorption as the dominant adsorption mechanism.

Site-Specific Conjugation of Bottlebrush Polymers to Therapeutic Protein via Bioorthogonal Chemistry.

Achieving efficient and site-specific conjugation of therapeutic protein to polymer is crucial to augment their applicability in the realms of biomedicine by improving their stability and enzymatic activity. In this study, we exploited tetrazine bioorthogonal chemistry to achieve the site-specific conjugation of bottlebrush polymers to urate oxidase (UOX), a therapeutic protein for gout treatment. An azido-functionalized zwitterionic bottlebrush polymer (N3-ZBP) using a "grafting-from" strategy involving RAFT and ATRP methods was synthesized, and a trans-cyclooctene (TCO) moiety was introduced at the polymer end through the strain-promoted azide-alkyne click (SPAAC) reaction. The subsequent coupling between TCO-incorporated bottlebrush polymer and tetrazine-labeled UOX using a fast and safe bioorthogonal reaction, inverse electron demand Diels-Alder (IEDDA), led to the formation of UOX-ZBP conjugates with a 52% yield. Importantly, the enzymatic activity of UOX remained unaffected following polymer conjugation, suggesting a minimal change in the folded structure of UOX. Moreover, UOX-ZBP conjugates exhibited enhanced proteolytic resistance and reduced antibody binding, compared to UOX-wild type. Overall, the present findings reveal an efficient and straightforward route for synthesizing protein-bottlebrush polymer conjugates without compromising the enzymatic activity while substantially reducing proteolytic degradation and antibody binding.

Visualization of Modified Bisarylbutadiyne-Tagged Small Molecules in Live-Cell Nuclei by Stimulated Raman Scattering Microscopy.

Visualizing the distribution of small-molecule drugs in living cells is an important strategy for developing specific, effective, and minimally toxic drugs. As an alternative to fluorescence imaging using bulky fluorophores or cell fixation, stimulated Raman scattering (SRS) imaging combined with bisarylbutadiyne (BADY) tagging enables the observation of small molecules closer to their native intracellular state. However, there is evidence that the physicochemical properties of BADY-tagged analogues of small-molecule drugs differ significantly from those of their parent drugs, potentially affecting their intracellular distribution. Herein, we developed a modified BADY to reduce deviations in physicochemical properties (in particular, lipophilicity and membrane permeability) between tagged and parent drugs, while maintaining high Raman activity in live-cell SRS imaging. We highlight the practical application of this approach by revealing the nuclear distribution of a modified BADY-tagged analogue of JQ1, a bromodomain and extra-terminal motif inhibitor with applications in targeted cancer therapy, in living HeLa cells. The modified BADY, methoxypyridazyl pyrimidyl butadiyne (MPDY), revealed intranuclear JQ1, while BADY-tagged JQ1 did not show a clear nuclear signal. We anticipate that the present approach combining MPDY tagging with live-cell SRS imaging provides important insight into the behavior of intracellular drugs and represents a promising avenue for improving drug development.

A highly sensitive and selective fluorescent biosensor for breast cancer derived exosomes using click reaction of azide-CD63 aptamer and alkyne-polymer dots.

Exosomes have gained recognition as valuable reservoirs of biomarkers, holding immense potential for early cancer detection. Consequently, there is a pressing need for the development of an economical and highly sensitive exosome detection methodology. In this work, we present a fluorescence method for breast cancer-derived exosome detection based on Cu-triggered click reaction of azide-modified CD63 aptamer and alkyne functionalized Pdots. The detection threshold for the exosomes obtained from the breast cancer serum was determined to be 6.09 × 107 particles per µL, while the measurable range spanned from 6.50 × 107 to 1.30 × 109 particles per µL. The employed methodology achieved notable success in accurately distinguishing breast cancer patients from healthy individuals through serum analysis. The application of this method showcases the significant potential for early exosome analysis in the clinical diagnosis of breast cancer patients.

Transfer Hydrogenation of Vinyl Arenes and Aryl Acetylenes with Ammonia Borane Catalyzed by Schiff Base Cobalt(II) Complexes.

A series of bench-stable Co(II) complexes containing hydrazone Schiff base ligands were evaluated in terms of their activity and selectivity in carbon-carbon multiple bond transfer hydrogenation. These cobalt complexes, especially a Co(II) precatalyst bearing pyridine-2-yl-N(Me)N=C-(1-methyl)imidazole-2-yl ligand, activated by LiHBEt3, were successfully used in the transfer hydrogenation of substituted styrenes and phenylacetylenes with ammonia borane as a hydrogen source. Key advantages of the reported catalytic system include mild reaction conditions, high selectivity and tolerance to functional groups of substrates.