Predictive factors for postoperative outcomes after reverse shoulder arthroplasty: a systematic review.

BACKGROUND: The use of reverse total shoulder arthroplasty (RTSA) has increased at a greater rate than other shoulder procedures. In general, clinical and functional outcomes after RTSA have been favorable regardless of indication. However, little evidence exists regarding patient specific factors associated with clinical improvement after RTSA. Predicting postoperative outcomes after RTSA may support patients and physicians to establish more accurate patient expectations and contribute in treatment decisions. The aim of this study was to determine predictive factors for postoperative outcomes after RTSA for patients with degenerative shoulder disorders. METHODS: EMBASE, PubMed, Cochrane Library and PEDro were searched to identify cohort studies reporting on predictive factors for postoperative outcomes after RTSA. Authors independently screened publications on eligibility. Risk of bias for each publication was assessed using the QUIPS tool. A qualitative description of the results was given. The GRADE framework was used to establish the quality of evidence. RESULTS: A total of 1986 references were found of which 11 relevant articles were included in the analysis. Risk of bias was assessed as low (N = 7, 63.6%) or moderate (N = 4, 36.4%). According to the evidence synthesis there was moderate-quality evidence indicating that greater height predicts better postoperative shoulder function, and greater preoperative range of motion (ROM) predicts increased postoperative ROM following. CONCLUSION: Preoperative predictive factors that may predict postoperative outcomes are: patient height and preoperative range of motion. These factors should be considered in the preoperative decision making for a RTSA, and can potentially be used to aid in preoperative decision making. LEVEL OF EVIDENCE: Level I; Systematic review.

An Innovative Approach to Classifying and Treating Axillary Scar Contracture.

BACKGROUND: Axillary cicatricial contracture is a debilitating condition that can greatly impair shoulder joint function. Therefore, timely correction of this condition is imperative. In light of Ogawa's prior classification of axillary cicatricial contracture deformities, we have proposed a novel classification system and reconstruction principles based on a decade of treatment experience. Our proposed system offers a more comprehensive approach to correcting axillary cicatricial contracture deformities and aims to improve patient outcomes. METHODS: Our study included 196 patients with a total of 223 axillary cicatricial contracture deformities. The range of shoulder abduction varied between 10 and 120 degrees. Our treatment approach included various methods such as the lateral thoracic flap, transverse scapular artery flap, cervical superficial artery flap, medial upper arm flap, latissimus dorsi flap, Z-shape modification, and the use of local flaps combined with skin grafting. After 2 weeks, the sutures were removed, and patients were instructed to start functional exercises. To categorize the deformities, we divided them into 2 types: axillary-adjacent region cicatricial contracture (type I) and extended area contracture (type II). RESULTS: For each subtype, a specific treatment method was chosen based on a designed algorithm decision tree. Out of the total cases, 133 patients underwent treatment with various types of local flaps, including Z-plasty, whereas 63 patients received treatment involving skin grafting and different types of local flaps. At the time of discharge, the abduction angle of the shoulder joint ranged from 80 to 120 degrees. Among the 131 patients who were followed up, 108 of them adhered to a regimen of horizontal bar exercises. After a 1-year follow-up period, the abduction angle of the shoulder joint had significantly improved to a range of 110-180 degrees. CONCLUSIONS: We have proposed a novel classification method for the correction of axillary cicatricial contracture deformity. This approach involves utilizing distinct correction strategies, in conjunction with postoperative functional exercise, to ensure the effectiveness of axillary reconstruction.

Experimental guide wire placement for total shoulder arthroplasty in glenoid models: higher precision for patient-specific aiming guides compared to standard technique without learning curve.

BACKGROUND: Patient-specific aiming devices (PSAD) may improve precision and accuracy of glenoid component positioning in total shoulder arthroplasty, especially in degenerative glenoids. The aim of this study was to compare precision and accuracy of guide wire positioning into different glenoid models using a PSAD versus a standard guide. METHODS: Three experienced shoulder surgeons inserted 2.5 mm K-wires into polyurethane cast glenoid models of type Walch A, B and C (in total 180 models). Every surgeon placed guide wires into 10 glenoids of each type with a standard guide by DePuy Synthes in group (I) and with a PSAD in group (II). Deviation from planned version, inclination and entry point was measured, as well as investigation of a possible learning curve. RESULTS: Maximal deviation in version in B- and C-glenoids in (I) was 20.3° versus 4.8° in (II) (p < 0.001) and in inclination was 20.0° in (I) versus 3.7° in (II) (p < 0.001). For B-glenoid, more than 50% of the guide wires in (I) had a version deviation between 11.9° and 20.3° compared to ≤ 2.2° in (II) (p < 0.001). 50% of B- and C-glenoids in (I) showed a median inclination deviation of 4.6° (0.0°-20.0°; p < 0.001) versus 1.8° (0.0°-4.0°; p < 0.001) in (II). Deviation from the entry point was always less than 5.0 mm when using PSAD compared to a maximum of 7.7 mm with the standard guide and was most pronounced in type C (p < 0.001). CONCLUSION: PSAD enhance precision and accuracy of guide wire placement particularly for deformed B and C type glenoids compared to a standard guide in vitro. There was no learning curve for PSAD. However, findings of this study cannot be directly translated to the clinical reality and require further corroboration.

Risk factors of poor mid-term shoulder functional outcomes of osteosynthesis using antegrade intramedullary nailing for humeral shaft fractures: a retrospective study with a minimum 5-year follow-up.

BACKGROUND: Osteosynthesis using antegrade intramedullary nailing for humeral shaft fractures yields satisfactory bone union rates; however, it may adversely affect postoperative shoulder function. To date, factors affecting mid- or long-term shoulder functional outcomes following intramedullary nail fixation have not been clarified. In this study, we aimed to identify the risk factors for poor mid-term functional outcomes over 5 years postoperatively following antegrade intramedullary nail osteosynthesis for humeral shaft fractures. METHODS: We retrospectively identified 33 patients who underwent surgery using an antegrade intramedullary nail for acute traumatic humeral shaft fractures and were followed up for at least 5 years postoperatively. We divided the patients into clinical failure and no clinical failure groups using an age- and sex-adjusted Constant score of 55 at the final follow-up as the cutoff value. We compared preoperative, perioperative, and postoperative factors between the two groups. RESULTS: Five of the 33 patients had poor shoulder functional outcomes (adjusted Constant score < 55) at a mean follow-up of 7.5 years postoperatively. Proximal protrusion of the nail at the time of bone union (P = 0.004) and older age (P = 0.009) were significantly associated with clinical failure in the univariate analyses. Multivariate analysis showed that proximal protrusion of the nail (P = 0.031) was a risk factor for poor outcomes. CONCLUSIONS: The findings of this study provide new information on predictive factors affecting mid-term outcomes following osteosynthesis using antegrade nails. Our results demonstrated that proximal protrusion of the nail was significantly associated with poor mid-term functional shoulder outcomes. Therefore, particularly in older adults, it is essential to place the proximal end of the intramedullary nail below the level of the articular cartilage.

Tuberoplasty reduces resistance force in dynamic shoulder abduction for irreparable rotator cuff tears: a cadaveric biomechanical study.

BACKGROUND: Arthroscopic tuberoplasty is an optional technique for managing irreparable rotator cuff tears. However, there is a lack of studies investigating the resistance force during shoulder abduction in cases of irreparable rotator cuff tears and tuberoplasty. HYPOTHESES: In shoulders with irreparable rotator cuff tears, impingement between the greater tuberosity (GT) and acromion increases the resistance force during dynamic shoulder abduction. Tuberoplasty is hypothesized to reduce this resistance force by mitigating impingement. STUDY DESIGN: Controlled laboratory study. METHODS: Eight cadaveric shoulders, with a mean age of 67.75 years (range, 63-72 years), were utilized. The testing sequence included intact rotator cuff condition, irreparable rotator cuff tears (IRCTs), burnishing tuberoplasty, and prosthesis tuberoplasty. Burnishing tuberoplasty refers to the process wherein osteophytes on the GT are removed using a bur, and the GT is subsequently trimmed to create a rounded surface that maintains continuity with the humeral head. Deltoid forces and actuator distances were recorded. The relationship between deltoid forces and actuator distance was graphically represented in an ascending curve. Data were collected at five points within each motion cycle, corresponding to actuator distances of 20 mm, 30 mm, 40 mm, 50 mm, and 60 mm. RESULTS: In the intact rotator cuff condition, resistance forces at the five points were 34.25 ± 7.73 N, 53.75 ± 7.44 N, 82.50 ± 14.88 N, 136.25 ± 30.21 N, and 203.75 ± 30.68 N. In the IRCT testing cycle, resistance forces were 46.13 ± 7.72 N, 63.75 ± 10.61 N, 101.25 ± 9.91 N, 152.5 ± 21.21 N, and 231.25 ± 40.16 N. Burnishing tuberoplasty resulted in resistance forces of 32.25 ± 3.54 N, 51.25 ± 3.54 N, 75.00 ± 10.69 N, 115.00 ± 10.69 N, and 183.75 ± 25.04 N. Prosthesis tuberoplasty showed resistance forces of 29.88 ± 1.55 N, 49.88 ± 1.36 N, 73.75 ± 7.44 N, 112.50 ± 7.07 N, and 182.50 ± 19.09 N. Both forms of tuberoplasty significantly reduced resistance force compared to IRCTs. Prosthesis tuberoplasty further decreased resistance force due to a smooth surface, although the difference was not significant compared to burnishing tuberoplasty. CONCLUSION: Tuberoplasty effectively reduces resistance force during dynamic shoulder abduction in irreparable rotator cuff tears. Prosthesis tuberoplasty does not offer a significant advantage over burnishing tuberoplasty in reducing resistance force. CLINICAL RELEVANCE: Tuberoplasty has the potential to decrease impingement, subsequently reducing resistance force during dynamic shoulder abduction, which may be beneficial in addressing conditions like pseudoparalysis.

International trends in shoulder replacement: a meta-analysis from 11 public joint registers.

BACKGROUND AND PURPOSE: International variation exists in the types of shoulder replacement used for treatment of specific diseases. Implant choice continues to evolve without high-quality evidence. Our aim was to evaluate trends in incidence rates of shoulder replacement and assess any recent changes in practice between countries by using registry data. METHODS: Patient characteristics, indication and year of surgery, type of replacement, and collection methods of patient-reported outcomes (PROMs) was extracted from 11 public joint registries. Meta-analyses examined use of reverse total shoulder replacement (RTSR) for osteoarthritis, cuff tear arthropathy, and acute fracture; use of anatomical total shoulder replacement (TSR) for osteoarthritis; and use of humeral hemiarthroplasty for fracture. RESULTS: The annual growth rate of shoulder replacements performed is 6-15% (2011-2019). The use of RTSR has almost doubled (93%). RTSR is now universally performed for cuff tear arthropathy (97.3%, 95% confidence interval [CI] 96.0-98.1). Its use for avascular necrosis, trauma, and inflammatory arthropathy is increasing. The use of RTSR was similar (43.1%, CI 30.0-57.2) versus TSR (44.7%, CI 31.1-59.1) for osteoarthritis. The types of PROMs used, collection time points, and response rates lack standardization. COVID-19 had a varying inter-registry impact on incidence rates. CONCLUSION: The incidence of shoulder replacements has grown. Use of RTSR has increased for all disease indications despite limited high-quality evidence driving this change in indications outside of cuff arthropathy. Consequently, less variation is observed in international practice. Existing differences now relate to use of newer implant types and methodology of PROMs collection, which prevents international comparison and outcome analysis.

Metaverse, virtual reality and augmented reality in total shoulder arthroplasty: a systematic review.

PURPOSE: This systematic review aims to provide an overview of the current knowledge on the role of the metaverse, augmented reality, and virtual reality in reverse shoulder arthroplasty. METHODS: A systematic review was performed using the PRISMA guidelines. A comprehensive review of the applications of the metaverse, augmented reality, and virtual reality in in-vivo intraoperative navigation, in the training of orthopedic residents, and in the latest innovations proposed in ex-vivo studies was conducted. RESULTS: A total of 22 articles were included in the review. Data on navigated shoulder arthroplasty was extracted from 14 articles: seven hundred ninety-three patients treated with intraoperative navigated rTSA or aTSA were included. Also, three randomized control trials (RCTs) reported outcomes on a total of fifty-three orthopedics surgical residents and doctors receiving VR-based training for rTSA, which were also included in the review. Three studies reporting the latest VR and AR-based rTSA applications and two proof of concept studies were also included in the review. CONCLUSIONS: The metaverse, augmented reality, and virtual reality present immense potential for the future of orthopedic surgery. As these technologies advance, it is crucial to conduct additional research, foster development, and seamlessly integrate them into surgical education to fully harness their capabilities and transform the field. This evolution promises enhanced accuracy, expanded training opportunities, and improved surgical planning capabilities.

Nontyphoidal salmonella septic arthritis in A patient with systemic lupus erythematosus: A case report.

We report a case of septic arthritis in a 43-year-old female patient. Despite initial treatment with ceftriaxone for Nontyphoidal Salmonella based on blood and joint fluid culture results, the shoulder joint pain worsened. Suspected systemic lupus erythematosus associated synovitis did not respond to immunosuppressive therapy including methylprednisolone, hydroxychloroquine and methotrexate. Subsequent radiograph revealed a shoulder joint abscess, leading to arthroscopic joint debridement. Ceftriaxone was administered post-operatively until analgesic efficacy was attained. This case highlights the significance of accurate diagnosis and appropriate treatment for nontyphoidal Salmonella septic arthritis.

Factors influencing shoulder stiffness after open reduction and internal fixation of proximal humeral fractures.

OBJECTIVES: The study aimed to investigate the factors associated with shoulder stiffness following open reduction and internal fixation (ORIF) of proximal humeral fractures. PATIENTS AND METHODS: The retrospective study included a total of 151 patients who underwent ORIF of proximal humeral fractures between January 2016 and May 2021. Based on their shoulder joint motion at the latest follow-up, the patients were divided into two groups. The stiffness group (n=32; 8 males, 24 females; mean age: 62.4±9.3 years; range, 31 to 79 years), exhibited restricted shoulder forward flexion (<120°), limited arm lateral external rotation (<30°), and reduced back internal rotation below the L3 level. The remaining patients were included in the non-stiffness group (n=119; 52 males, 67 females; mean age: 56.4±13.4 years; range, 18 to 90 years). Various factors were examined to evaluate the association with shoulder stiffness following ORIF of proximal humeral fractures by multivariate unconditional logistic regression models. RESULTS: The mean follow-up duration was 31.8±12.6 (range, 12 to 68) months. Based on the results of the multivariate regression analysis, it was found that high-energy injuries [compared to low-energy injuries; adjusted odds ratio (aOR)=7.706, 95% confidence interval (CI): 3.564-15.579, p<0.001], a time from injury to surgery longer than one week (compared to a time from injury to surgery equal to or less than one week; aOR=5.275, 95% CI: 1.7321-9.472, p=0.031), and a body mass index (BMI) >24.0 kg/m2 (compared to a BMI between 18.5 and 24.0 kg/m2 ; aOR=4.427, 95% CI: 1.671-11.722, p=0.023) were identified as risk factors for shoulder stiffness following ORIF of proximal humeral fractures. CONCLUSION: High-energy injury, time from injury to surgery longer than one week, and BMI >24.0 kg/m2 were identified as independent risk factors for shoulder stiffness after proximal humeral fracture surgery, which should be treated with caution in clinical treatment.

Biomechanical study of 3D-printed titanium alloy pad for repairing glenoid bone defect.

Background: The purpose of this study was to investigate the effect of 3D-printed technology to repair glenoid bone defect on shoulder joint stability. Methods: The shoulder joints of 25 male cadavers were tested. The 3D-printed glenoid pad was designed and fabricated. The specimens were divided into 5 groups. Group A: no bone defect and the structure of the glenoid labrum and joint capsule was intact; Group B: Anterior inferior bone defect of the shoulder glenoid; Group C: a pad with a width of 2 mm was installed; Group D: a pad with a width of 4 mm was installed; Group E: a pad with a width of 6 mm was installed. This study measured the distance the humeral head moved forward at the time of glenohumeral dislocation and the maximum load required to dislocate the shoulder. Results: The shoulder joint stability and humerus displacement was significantly lower in groups B and C compared with group A (p < .05). Compared with group A, the stability of the shoulder joint of group D was significantly improved (p < .05). However, there was no significant difference in humerus displacement between groups D and A (p > .05). In addition, compared with group A, shoulder joint stability was significantly increased and humerus displacement was significantly decreased in group E (p < .05). Conclusion: The 3D-printed technology can be used to make the shoulder glenoid pad to perfectly restore the geometric shape of the shoulder glenoid articular surface. Moreover, the 3D-printed pad is 2 mm larger than the normal glenoid width to restore the initial stability of the shoulder joint.

Subscapularis Management in Anatomic Total Shoulder Arthroplasty A Review.

Surgical management of the subscapularis tendon is critical to a successful outcome following anatomic total shoulder arthroplasty. However, the optimal surgical technique for adequate exposure of the glenohumeral joint while mini-mizing complications resulting from subscapularis tendon dysfunction continues to be controversial. Common surgical techniques for the management of the subscapularis tendon include tenotomy, peeling, sparing, and lesser tuberosity oste-otomy. Despite a number of published studies comparing these techniques, no consensus has been reached regarding optimal management. This article reviews the extensive literature on the biomechanical, radiologic, and clinical outcomes of each technique, including recently published comparison studies.

Optimising safe margins in shoulder surgeries: a cadaveric study on brachial plexus nerves with anthropometric and movement correlation.

PURPOSE: Shoulder surgeries, vital for diverse pathologies, pose a risk of iatrogenic nerve damage. Existing literature lacks diverse bone landmark-specific nerve position data. The purpose of this study is to address this gap by investigating such relationships. METHOD: This cadaveric study examines axillary, radial and suprascapular nerves' relation with acromion, coracoid and greater tuberosity of the humerus (GT). It also correlates this data with humeral lengths and explores nerve dynamics in relation to arm positions. RESULTS: The mean distance from the axillary nerve to (i) GT was 4.38 cm (range 3.32-5.44, SD 0.53), (ii) acromion was 6.42 cm (range 5.03-7.8, SD 0.694) and (iii) coracoid process was 4.3 cm (range 2.76-5.84, SD 0.769). Abduction brought the nerve closer by 0.36 cm, 0.35 cm and 0.53 cm, respectively. The mean distance from radial nerve to (i) GT was 5.46 cm (range 3.78-7.14, SD 0.839), (ii) acromion was 7.82 cm (range 5.4-10.24, SD 1.21) and (iii) tip of the coracoid process was 6.09 cm (range 4.07-8.11 cm, SD 1.01). The mean distance from the suprascapular nerve to the acromion was 4.2 cm (range 3.1-5.4, SD 0.575). The mean humeral length was noted to be 27.83 cm (range 25.3-30.7, SD 1.13). There was no significant correlation between these distances and humeral lengths. CONCLUSION: It is essential to exercise caution to avoid axillary nerve damage during the abduction manoeuvre, as its distance from the greater tuberosity and tip of the coracoid process has shown a significant reduction. The safe margins, in relation to the length of the humerus and consequently the patient's stature, exhibit no significant variation. In situations where the greater tuberosity (GT) and the border of the acromion are inaccessible due to reasons such as trauma, the tip of the coracoid process can serve as a dependable bone landmark for establishing a secure surgical margin.

Surgeon Upper Extremity Kinematics During Error and Error-Free Retropubic Trocar Passage.

INTRODUCTION AND HYPOTHESIS: Surgeon kinematics play a significant role in the prevention of patient injury. We hypothesized that elbow extension and ulnar wrist deviation are associated with bladder injury during simulated midurethral sling (MUS) procedures. METHODS: We used motion capture technology to measure surgeons' flexion/extension, abduction/adduction, and internal/external rotation angular time series for shoulder, elbow, and wrist joints. Starting and ending angles, minimum and maximum angles, and range of motion (ROM) were extracted from each time series. We created anatomical multibody models and applied linear mixed modeling to compare kinematics between trials with versus without bladder penetration and attending versus resident surgeons. A total of 32 trials would provide 90% power to detect a difference. RESULTS: Out of 85 passes, 62 were posterior to the suprapubic bone and 20 penetrated the bladder. Trials with versus without bladder penetration were associated with more initial wrist dorsiflexion (-27.32 vs -9.03°, p = 0.01), less final elbow flexion (39.49 vs 60.81, p = 0.03), and greater ROM in both the wrist (27.48 vs 14.01, p = 0.02), and elbow (20.45 vs 12.87, p = 0.04). Wrist deviation and arm pronation were not associated with bladder penetration. Compared with attendings, residents had more ROM in elbow flexion (14.61 vs 8.35°, p < 0.01), but less ROM in wrist dorsiflexion (13.31 vs 20.33, p = 0.02) and arm pronation (4.75 vs 38.46, p < 0.01). CONCLUSIONS: Bladder penetration during MUS is associated with wrist dorsiflexion and elbow flexion but not internal wrist deviation and arm supination. Attending surgeons exerted control with the wrist and forearm, surgical trainees with the elbow. Our findings have direct implications for MUS teaching.

Clinical Outcomes and Graft Resorption After Metal-Free Bone Block Suture Tape Cerclage Fixation for Recurrent Anterior Shoulder Instability: A Computed Tomography Analysis.

BACKGROUND: Glenoid reconstruction with a bone block for anterior glenoid bone loss (GBL) has shown excellent outcomes. However, fixation techniques that require metal implants are associated with metal-related complications and bone graft resorption. HYPOTHESIS: Arthroscopic glenoid reconstruction using a tricortical iliac crest bone graft (ICBG) and metal-free suture tape cerclage fixation can safely and effectively restore the glenoid surface area in patients with recurrent anterior shoulder instability and anterior GBL. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: Adult patients (≥18 years) of both sexes with recurrent anterior shoulder instability and anterior GBL ≥15% were enrolled. These patients underwent arthroscopic glenoid reconstruction with ICBGs and metal-free suture tape cerclage fixation. The effectiveness and clinical outcomes with this technique were evaluated at 24 months using functional scores. Resorption of the graft articular surface was assessed by computed tomography, with the graft surface divided into 6 square areas aligned in 2 columns. Descriptive analysis was conducted. RESULTS: A total of 23 consecutive patients met inclusion criteria (22 male, 1 female; mean age, 30.5 ± 7.9 years). The mean preoperative GBL was 19.7% ± 3.4%, and there were 15 allograft and 8 autograft ICBGs. All patients exhibited graft union at 3 months. The median follow-up was 38.5 months (interquartile range, 24-45 months). The Western Ontario Shoulder Instability Index, Rowe, Constant-Murley, and Subjective Shoulder Value scores improved from preoperatively (35.1%, 24.8, 83.1, and 30.9, respectively) to postoperatively (84.7%, 91.1, 96.0, and 90.9, respectively) (P < .001). No differences in clinical scores were observed between the graft types. One surgical wound infection was reported, and 2 patients (8.7% [95% CI, 2.4%-26.8%]) required a reoperation. The mean overall glenoid surface area increased from 80.3% ± 3.5% to 117.0% ± 8.3% immediately after surgery before subsequently reducing to 98.7% ± 6.2% and 95.0% ± 5.7% at 12 and 24 months, respectively (P < .001). The mean graft resorption rate was 18.1% ± 7.9% in the inner column and 80.3% ± 22.4% in the outer column. Additionally, 3 patients treated with an allograft (20.0% [95% CI, 7.1%-45.2%]), including the 2 with clinical failures, exhibited complete graft resorption at the last follow-up. CONCLUSION: Arthroscopic glenoid reconstruction using an ICBG and metal-free suture tape cerclage fixation was safe and effective, yielding excellent clinical outcomes. Resorption of the graft articular surface predominantly affected the nonloaded areas beyond the best-fit circle perimeter.

Clinical Significance Thresholds in Primary and Revision Latarjet Procedures With Comparable Outcome Achievements.

BACKGROUND: Given the variability across populations and settings, defining the MCID and the PASS for the Rowe and ASOSS scores and patients undergoing primary and revision Latarjet it is essential to have accurate benchmarks relevant to these groups when interpreting clinical results. PURPOSE: To determine the minimal clinically important difference (MCID) and Patient Acceptable Symptom State (PASS) thresholds for the visual analog scale (VAS) for pain during sports, Athletic Shoulder Outcome Scoring System (ASOSS), and Rowe scores after primary and revision Latarjet procedures for treatment of shoulder instability. STUDY DESIGN: Cohort study (diagnosis); Level of evidence, 3. METHODS: Between January 2018 and January 2020, a retrospective review of 149 patients undergoing primary Latarjet (n = 82) and revision Latarjet (n = 67) to treat shoulder instability was performed in a single institution. Patient-reported outcome measures were collected preoperatively and 1 year postoperatively. The delta was defined as the change between the pre- and postoperative scores. Distribution-based and anchored-based approaches were used to estimate the MCID and the PASS, respectively. The optimal cutoff point and the percentage of patients achieving those thresholds were also calculated. RESULTS: The distribution-based MCIDs after primary Latarjet were 1.1, 7.5, and 9.6 for the VAS, Rowe, and ASOSS scores, respectively. The rates of patients who achieved the MCID thresholds were 93.9%, 98.7%, and 100% for the VAS, Rowe, and ASOSS scores, respectively. The PASS thresholds after primary Latarjet were ≤1, ≥90, and ≥85 for the VAS, Rowe, and ASOSS scores, respectively. The percentages of patients who achieved PASS thresholds were 82.9%, 89%, and 86.5% for the VAS, Rowe, and ASOSS scores, respectively. The distribution-based MCIDs after revision Latarjet were 0.6, 6.2, and 3.4 for the VAS, Rowe, and ASOSS scores, respectively. The rates of patients who achieved MCID thresholds were 89.3%, 100%, and 100% for the VAS, Rowe, and ASOSS scores, respectively. The PASS thresholds were ≤3, ≥87, and ≥86 after revision Latarjet for the VAS, Rowe, and ASOSS scores, respectively. The rates of patients who achieved the PASS thresholds were 88%, 88%, and 91% for the VAS, Rowe, and ASOSS, respectively. CONCLUSION: This study identified useful values for the MCID and PASS thresholds in VAS, Rowe, and ASOSS scores after primary and revision Latarjet procedures for treating shoulder instability. Most patients achieved MCID and PASS benchmarks, indicating successful primary and revision Latarjet procedure outcomes. These metrics can serve as valuable parameters when analyzing parameters in future studies and have the potential to enhance patient care by optimizing treatment strategies and surgical decision making.

Are Lower Passive Anterior Elevation and External Rotation at 6 Weeks Postoperatively Associated With Healing of Isolated Arthroscopic Supraspinatus Repairs?

BACKGROUND: Despite advancements in surgical technique, failure of tendon healing remains a common problem after arthroscopic rotator cuff repair (ARCR). PURPOSE/HYPOTHESIS: The purpose of this study was to examine the relationship between range of motion (ROM) recovery and healing after ARCR. It was hypothesized that an early loss of ROM would be associated with tendon healing. STUDY DESIGN: Case-control study; Level of evidence, 3. METHODS: This was a retrospective comparative study of primary ARCR of isolated full-thickness supraspinatus (SSN) tendon tears. Cases were retrieved from a prospective rotator cuff repair database and divided into 2 groups based on healing (healed/nonhealed). A standardized clinical evaluation was performed before and at 6 weeks, 3 months, and 6 months after surgery. Collected data included passive and active ROM, visual analog scale for pain, and Constant score. Healing was assessed by ultrasound at 6 months. RESULTS: Of 1397 eligible ARCRs, 1207 were included. The healing rate was 86.7%. Age was higher in the nonhealed group (57.8 ± 7.9 years vs 61.6 ± 8.8 years; P < .001). Patients with healed repairs had a larger decrease in passive anterior elevation (AE) from the preoperative to the 6-week postoperative visit (-31°± 28° vs -18°± 26°; P < .001), followed by a more substantial increase throughout the remaining follow-up period (32°± 23° vs 18°± 21°; P < .001). At 6 months postoperatively, there was no difference in AE between groups (159°± 17° vs 161°± 14°; P > .999). External rotation elbow at side (ER1) and internal rotation hand in the back (IR1) followed similar courses of recovery. Passive and active ROM had a strong positive correlation at each follow-up. Age (odds ratio [OR], 1.79; 95% CI, 1.45-2.23; P < .001) and 6-week passive AE (OR, 1.33; 95% CI, 1.20-1.48; P < .001) and ER1 (OR, 1.15; 95% CI, 1.03-1.29; P = .017) were predictors for nonhealing. CONCLUSION: Lower passive AE and ER1 at 6 weeks postoperatively and younger age are associated with healing after ARCR of isolated SSN tendon tears. At 6 months postoperatively, there were no differences in ROM, regardless of tendon healing.