Effects of ionic strength and bentonite ratio on the migration of Cr(VI) in clayey soil-bentonite engineered barrier.

Soil-bentonite (S-B) barriers have been widely used for heavy metal pollution containment. This study conducted batch adsorption tests and diffusion-through tests to evaluate how ionic strength and bentonite ratio influence the migration of Cr(VI) in natural clay-bentonite mixtures. The test results indicated that the adsorption of Cr(VI) exhibited an obvious anion adsorption effect, the pH of the soil mixture increased with the addition of bentonite, resulting in a decrease in the positive surface charge. This change led to a decrease in Cr(VI) adsorption capacity, from 775.19 mg/kg for pure clay to 378 mg/kg for mixture samples with excessive bentonite. Furthermore, as the ionic strength increases from 0 to 0.1 M, the Cr(VI) adsorption capacity increases slightly due to the weakening of electrostatic repulsion on the clay particle surface, but the effective diffusion coefficient (De) increases by 21.97%. The compression of the diffusion double layer (DDL) under high ionic strength conditions enlarges the diffusion path and enhances the migration of Cr(VI) through the pore flow paths. Moreover, hydrated bentonite effectively fills the interaggregate pores of natural clay, thus creating narrower and more tortuous flow paths. However, excessive bentonite increases the pH value and pore volume, resulting in changes to the soil microstructure and disrupting the continuous skeleton of natural clay, which is unfavorable for Cr(VI) containment. Based on the study of the Cr(VI) contaminated site, a bentonite ratio of 2:10 is recommended for optimal natural performance of the natural clay-bentonite barrier.

Dramatic loss of microbial viability in bentonite exposed to heat and gamma radiation: implications for deep geological repository.

Bentonite is an integral part of the engineered barrier system (EBS) in deep geological repositories (DGR) for nuclear waste, but its indigenous microorganisms may jeopardize long-term EBS integrity. To predict microbial activity in DGRs, it is essential to understand microbial reactions to the early hot phase of DGR evolution. Two bentonites (BCV and MX-80) with varied bentonite/water ratios and saturation levels (compacted to 1600 kg.m- 3 dry density/powder/suspension), were subjected to heat (90-150 °C) and irradiation (0.4 Gy.h- 1) in the long-term experiments (up to 18 months). Molecular-genetic, microscopic, and cultivation-based techniques assessed microbial survivability. Exposure to 90 °C and 150 °C notably diminished microbial viability, irrespective of bentonite form, with negligible impacts from irradiation or sample type compared to temperature. Bentonite powder samples exhibited microbial recovery after 90 °C heating for up to 6 months but not 12 months in most cases; exposure to 150 °C had an even stronger effect. Further long-term experiments at additional temperatures combined with the mathematical prediction of temperature evolution in DGR are recommended to validate the possible evolution and spatial distribution of microbially depleted zones in bentonite buffer around the waste canisters and refine predictions of microbial effects over time in the DGR.

A Feeding Trial to Investigate Strategies to Mitigate the Impacts of Pimelea Poisoning in Australian Cattle.

Pimelea poisoning of cattle causes distinct symptoms and frequently death, attributable to the toxin simplexin. Pimelea poisoning was induced via addition of ground Pimelea trichostachya plant to the daily feed in a three-month trial with Droughtmaster steers. The trial tested four potential mitigation treatments, namely, biochar, activated biochar, bentonite, and a bacterial inoculum, and incorporated negative and positive control groups. All treatments tested were unable to prevent the development of simplexin poisoning effects. However, steers consuming a bentonite adsorbent together with Pimelea showed lesser rates-of-decline for body weight (P < 0.05) and four hematological parameters (P < 0.02), compared to the positive control group fed Pimelea only. Microbiome analysis revealed that despite displaying poisoning symptoms, the rumen microbial populations of animals receiving Pimelea were very resilient, with dominant bacterial populations maintained over time. Unexpectedly, clinical edema developed in some animals up to 2 weeks after Pimelea dosing was ceased.

Intermolecular Electrostatic Interactions in Cytochrome c Protein Monolayer on Montmorillonite Alumosilicate Surface: A Positive Cooperative Effect.

Montmorillonite (MM) crystal nanoplates acquire anticancer properties when coated with the mitochondrial protein cytochrome c (cytC) due to the cancer cells' capability to phagocytize cytC-MM colloid particles. The introduced exogenous cytC initiates apoptosis: an irreversible cascade of biochemical reactions leading to cell death. In the present research, we investigate the organization of the cytC layer on the MM surface by employing physicochemical and computer methods-microelectrophoresis, static, and electric light scattering-to study cytC adsorption on the MM surface, and protein electrostatics and docking to calculate the local electric potential and Gibbs free energy of interacting protein globules. The found protein concentration dependence of the adsorbed cytC quantity is nonlinear, manifesting a positive cooperative effect that emerges when the adsorbed cytC globules occupy more than one-third of the MM surface. Computer analysis reveals that the cooperative effect is caused by the formation of protein associates in which the cytC globules are oriented with oppositely charged surfaces. The formation of dimers and trimers is accompanied by a strong reduction in the electrostatic component of the Gibbs free energy of protein association, while the van der Waals component plays a secondary role.

A synthetic and transparent clay removes Microcystis aeruginosa efficiently.

Clay-algae flocculation is a promising method to remove harmful algal blooms (HABs) in aquatic ecosystems. Many HAB-generating species, such as Microcystis aeruginosa (M. aeruginosa), a common species in lakes, produce toxins and harm the environment, human health, and the economy. Natural clays, such as bentonite and kaolinite, and modification of these clays have been applied to mitigate HABs by forming large aggregates and settling down. In this study, we aim to examine the impact of laponite, a commercially available smectite clay that is synthetic, transparent, compatible with human tissues, and degradable, on removing HABs. We compare the cell removal efficiencies (RE) of laponite, two natural clays, and their polyaluminum chloride (PAC)-modified versions through clay-algae flocculation experiments. Our results show that the optimum concentrations of laponite, bentonite, kaolinite, PAC-modified bentonite, and PAC-modified kaolinite to remove 80 % of the M. aeruginosa cells from the water column are 0.05 g/L, 2 g/L, 4 g/L, 2 g/L and 0.3 g/L respectively. Therefore, to achieve the same cell removal efficiency, the amount of laponite needed is 40 to 80 times less than bentonite and kaolinite, and 6 times less than PAC-modified kaolinite. We demonstrate that the superior performance of laponite clay is because of its smaller particle size, which increases the encounter rate between cells and clay particles. Furthermore, experiments using water samples from Powderhorn Lake confirmed laponite's effectiveness in mitigating HABs. Our price analysis also suggests that this commercially-available clay, laponite, can be used in the field at a relatively low cost.

Incorporation of montmorillonite into microfluidics-generated chitosan microfibers enhances neuron-like PC12 cells for application in neural tissue engineering.

The complexity in structure and function of the nervous system, as well as its slow rate of regeneration, makes it more difficult to treat it compared to other tissues. Neural tissue engineering aims to create an appropriate environment for nerve cell proliferation and differentiation. Fibrous scaffolds with suitable morphology and topography and better mimicry of the extracellular matrix have been promising for the alignment and migration of neural cells. On this premise, to improve the properties of the scaffold, we combined montmorillonite (MMT) with chitosan (CS) polymer and created microfibers with variable diameters and varied concentrations of MMT using microfluidic technology and tested its suitability for the rat pheochromocytoma cell line (PC12). According to the findings, CS/MMT 0.1 % compared to CS/MMT 0 % microfibers showed a 201 MPa increase in Young's modulus, a 68 mS/m increase in conductivity, and a 1.4-fold increase in output voltage. Analysis of cell mitochondrial activity verified the non-toxicity, resulting in good cell morphology with orientation along the microfiber. Overall, the results of this project showed that with a low concentration of MMT, the properties of microfibers can be significantly improved and a suitable scaffold can be designed for neural tissue engineering.

Bentonite-supplemented diets improved fish performance ammonia excretion haemato-biochemical analyses immunity antioxidants and histological characteristics of European seabass Dicentrarchus labrax.

The purpose of this research was to examine the potential effects of bentonite (BN) supplemented diets on growth, feed utilization, blood biochemistry, and histomorphology of Dicentrarchus labrax. Six treatments in triplicate were tested: B0, B0.5, B1.0, B1.5, B3.0, and B4.5, which represented fish groups fed diets supplemented with 0, 0.5, 1, 1.5, 3, and 4.5% BN, respectively. For 84 days, juveniles' seabass (initial weight = 32.73 g) were fed diets containing 46% protein, three times daily at 3% of body weight. With a 5% daily water exchange, underground seawater (32 ppt) was used. Findings revealed significant improvements in water quality (TAN and NH3), growth (FW, WG and SGR) and feed utilization (FCR, PER and PPV) in fish fed BN-supplemented diets, with the best values in favor of the B1.5 group. Additional enhancements in kidney function indicators (urea and uric acid) and liver enzymes were observed in fish of the BN-treated groups along with a decrease in cholesterol level in the B1.5 group. Further improvements in fish innate immunity (hemoglobin, red blood cells, glucose, total protein, globulin, and immunoglobulin IgM), antioxidant activity (total antioxidative capacity and catalase), and decreased cortisol levels in fish of the BN-treated groups. Histological examinations of the anterior and posterior intestines and liver in groups B1.5 and B3 revealed the healthiest organs. This study recommends BN at a concentration of 1.5% as a feed additive in the Dicentrarchus labrax diet.

Recent advances of application of bentonite-based composites in the environmental remediation.

Bentonite-based composites have been widely utilized in the removal of various pollutants due to low cost, environmentally friendly, ease-to-operate, whereas the recent advances concerning the application of bentonite-based composites in environmental remediation were not available. Herein, the modification (i.e., acid/alkaline washing, thermal treatment and hybrids) of bentonite was firstly reviewed; Then the recent advances of adsorption of environmental concomitants (e.g., organic (dyes, microplastics, phenolic and other organics) and inorganic pollutants (heavy metals, radionuclides and other inorganic pollutants)) on various bentonite-based composites were summarized in details. Meanwhile, the effect of environmental factors and interaction mechanism between bentonite-based composites and contaminants were also investigated. Finally, the conclusions and prospective of bentonite-based composites in the environmental remediation were proposed. It is demonstrated that various bentonite-based composites exhibited the high adsorption/degradation capacity towards environmental pollutants under the specific conditions. The interaction mechanism involved the mineralization, physical/chemical adsorption, co-precipitation and complexation. This review highlights the effect of different functionalization of bentonite-based composites on their adsorption capacity and interaction mechanism, which is expected to be helpful to environmental scientists for applying bentonite-based composites into practical environmental remediation.

Heteroaggregation and deposition behaviors of carboxylated nanoplastics with different types of clay minerals in aquatic environments: Important role of calcium(II) ion-assisted bridging.

The widespread utilization of plastic products ineluctably leads to the ubiquity of nanoplastics (NPs), causing potential risks for aquatic environments. Interactions of NPs with mineral surfaces may affect NPs transport, fate and ecotoxicity. This study aims to investigate systematically the deposition and aggregation behaviors of carboxylated polystyrene nanoplastics (COOH-PSNPs) by four types of clay minerals (illite, kaolinite, Na-montmorillonite, and Ca-montmorillonite) under various solution chemistry conditions (pH, temperature, ionic strength and type). Results demonstrate that the deposition process was dominated by electrostatic interactions. Divalent cations (i.e., Ca2+, Mg2+, Cd2+, or Pb2+) were more efficient for screening surface negative charges and compressing the electrical double layer (EDL). Hence, there were significant increases in deposition rates of COOH-PSNPs with clay minerals in suspension containing divalent cations, whereas only slight increases in deposition rates of COOH-PSNPs were observed in monovalent cations (Na+, K+). Negligible deposition occurred in the presence of anions (F-, Cl-, NO3-, CO32-, SO42-, or PO43-). Divalent Ca2+ could incrementally facilitate the deposition of COOH-PSNPs through Ca2+-assisted bridging with increasing CaCl2 concentrations (0-100 mM). The weakened deposition of COOH-PSNPs with increasing pH (2.0-10.0) was primarily attributed to the reduce in positive charge density at the edges of clay minerals. In suspensions containing 2 mM CaCl2, increased Na+ ionic strength (0-100 mM) and temperature (15-55 ◦C) also favored the deposition of COOH-PSNPs. The ability of COOH-PSNPs deposited by four types of clay minerals followed the sequence of kaolinite > Na-montmorillonite > Ca-montmorillonite > illite, which was related to their structural and surface charge properties. This study revealed the deposition behaviors and mechanisms between NPs and clay minerals under environmentally representative conditions, which provided novel insights into the transport and fate of NPs in natural aquatic environments.

Preparation of iota-carrageenan@bentonite@4-phenyl-3-thiosemicarbazide ternary hydrogel for adsorption of Losartan potassium and sulfamethoxazole.

A rising quantity of drugs has been discharged into the aquatic environment, posing a substantial hazard to public health. In the current work, a novel hydrogel (i.Carr@Bent@PTC), comprised of iota-carrageenan, bentonite, and 4-phenyl-3-thiosemicarbazide, was successfully prepared. The introduction of 4-phenyl-3-thiosemicarbazide and bentonite in iota-carrageenan significantly increased the mechanical strength of iota-carrageenan hydrogel and improved its degree of swelling, which can be attributed to the hydrophilic properties of PTC and Bent. The recorded contact angle was 70.8°, 59.1°, 53.9°, and 34.6° for pristine i.Carr, i.Carr@Bent, and i.Carr@Bent@PTC, respectively. The low contact angle measurement of the Bent and PTC loaded-i.Carr hydrogel was attributed to the hydrophilic Bent and PTC. The ternary i.Carr@Bent@PTC hydrogel demonstrated broad pH adaptability and excellent adsorption capacities for sulfamethoxazole (SMX) and losartan potassium (LP), i.e., 467.61 mg. g-1 and 274.43 mg. g-1 at 298.15 K, respectively. The pseudo-first-order (PSO) model provided a better fit for the adsorption kinetics. The adsorption of SMX and LP can be better explained by employing the Sips and Langmuir isotherm models. As revealed by XPS and FTIR investigations, π-π stacking, complexation, electrostatic interaction, and hydrogen bonding were primarily involved in the adsorption mechanisms.

Novel granular bentonite-carbon sorbents: textural characterization, adsorption-desorption isotherm, kinetics, and cost estimation.

This research focuses on the synthesis of novel low-cost granular sorbents based on bentonite clay of the Navbahor deposit, dust fraction of Angren brown coal, and agricultural wastes such as straw and sawdust to meet the internal needs of the Republic of Uzbekistan. The impact of the initial mixture ingredients on the structural and textural properties of bentonite-coal sorbents (BCSs) has been studied using X-ray diffraction, Raman spectroscopy, Fourier-transform infrared spectroscopy, optical microscopy, and nitrogen adsorption-desorption analysis. For determining the sorption capacity of BCSs, a standard model substance methylene blue (MB), was applied. It was revealed that the maximum adsorption amount of MB was 5.3 mg∙g-1 during 2 h of contact. Prolonging the contact time to 24 h allowed for more extensive diffusion of dye molecules into the sorbent's pores, increasing the adsorption capacity to 13 mg∙g-1. It was demonstrated that BCSs could be regenerated by strong oxidizing agents such as sulfuric acid and hydrogen peroxide, with sulfuric acid proving more effective. Regeneration fully restores sorption properties, particularly at low dye concentrations (up to 0.2 mg∙ml-1). Despite slight reductions in adsorption capacity over multiple regeneration cycles, the sorbents maintain their structural integrity and durability. It is shown that compared to imported expensive activated carbon, the gross profitability of the in-house production of such granular BCSs within the territory of Uzbekistan increases from 48 to 78%, while the net income increases almost three times.

Immobilization of Horseradish Peroxidase onto Montmorillonite/Glucosamine-Chitosan Composite for Electrochemical Biosensing of Polyphenols.

Glucosamine-chitosan synthesized by the Maillard reaction was combined with montmorillonite to obtain a nanohybrid composite to immobilize horseradish peroxidase. The material combines the advantageous properties of clay with those of the chitosan derivative; has improved water solubility and reduced molecular weight and viscosity; involves an eco-friendly synthesis; and exhibits ion exchange capacity, good adhesiveness, and a large specific surface area for enzyme adsorption. The physicochemical characteristics of the composite were analyzed by infrared spectroscopy and X-ray diffraction to determine clay-polycation interactions. The electrochemical response of the different polyphenols to glassy carbon electrodes modified with the composite was evaluated by cyclic voltammetry. The sensitivity and detection limit values obtained with the biosensor toward hydroquinone, chlorogenic acid, catechol, and resorcinol are (1.6 ± 0.2) × 102 µA mM-1 and (74 ± 8) nM; (1.2 ± 0.1) × 102 µA mM-1 and (26 ± 3) nM; (16 ± 2) µA mM-1 and (0.74 ± 0.09) µM; and (3.7± 0.3) µA mM-1 and (3.3 ± 0.2) µM, respectively. The biosensor was applied to quantify polyphenols in pennyroyal and lemon verbena extracts.

Construction of mechanically robust and recyclable catalytic hydrogel based on hydroxypropyl cellulose-supported by montmorillonite/ionic liquid with different anions for pollutants(4-NP, MB, CR, Rhb) degradation.

Dye wastewater poses a serious threat to the environment and human health, necessitating sustainable degradation methods. In this study, Na-based Montmorillonite (MMT) was exfoliated using different ionic liquids ([C16MIM][Cl], [C16MIM][BF4], [C16MIM][PF6]), and silver nanoparticles (Ag NPs) were green-synthesized using hydroxypropyl cellulose (HPC). The HPC significantly enhanced the dispersion of MMT in the hydrogel. By introducing lauryl methacrylate (LMA), a hydrophobic associative network was constructed in PAM/LMA/HPC/MMT@ILs&Ag NPs hydrogel. This hydrogel demonstrated outstanding mechanical properties, with a stress of 833.21 kPa, strain of 3300 %, and toughness of 14.36 MJ/m3. It also exhibited excellent catalytic activity, with a rate constant of 0.83 min-1 for 4-nitrophenol degradation at 28 °C. The effects of temperature and catalyst concentration on the catalytic reaction were systematically investigated. This study presents a simple green synthesis approach for Ag NPs using HPC, achieving superior mechanical performance and stable MMT dispersion in aqueous solutions.

Zinc-exchanged montmorillonite clay: A promising slow-release nanofertilizer for rice (Oryza sativa L.).

This study is to examine zinc exchanged montmorillonite (Zn-MMT) as a potential slow release nanofertilizer for rice crop. The effective intercalation of zinc within the montmorillonite inter layers was firmly established via analytical techniques including Zeta potential, FE-SEM (Field Emission Scanning Electron Microscopy) with Energy Dispersive X-ray Analysis (EDAX), Transmission Electron Microscope (TEM), X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR). The efficacy of Zn-MMT was examined by evaluating its ability to facilitate controlled zinc release, as confirmed through an incubation study. Subsequently, the kinetics of zinc release was analyzed by different mathematical models such as Zero-order kinetics, First-order kinetics, the Higuchi model, and the Korsmeyer-Peppas model. From the pot culture study spanning 90 days the results indicated that Zn-MMT had significantly high plant height, Leaf Area Index (LAI), Dry Matter Production (DMP), number of tillers per hill, panicles length, increased grain and straw yield, in comparison with conventional zinc sulphate (ZnSO4). Total phenol, total protein and total chlorophyll content were significantly at higher levels with Zn-MMT treated rice crops as compared to conventional fertilizers and control. A similar trend was seen with phytochemicals such as Indole Acetic Acid (IAA), Superoxide Dismutase (SOD) and Carbonic Anhydrase (CA). Notably, rice grains harvested from Zn-MMTtreated crops exhibited significantly higher zinc content than those using other treatments. This Zn-MMT can be confirmed as a better alternative to conventional zinc sulphate fertilizers owing to its slow-release of nutrient into the soil and thus increased zinc use efficiency.

Mechanism of self-supporting montmorillonite composite material for bio-enhanced degradation of chlorotetracycline: Electron transfer and microbial response.

The efficient degradation of antibiotics holds significant implications for mitigating environmental pollution. This study synthesized a montmorillonite chitosan composite material (MMT-CS) using the gel template method. Subsequently, a bio-enhanced reactor was constructed to facilitate the degradation of chlorotetracycline (CTC). The addition of MMT-CS composite material enables the degradation of different concentrations of CTC. MMT-CS, a conductive carrier, effectively promotes microbial adhesion and boosts the metabolic activity of functional microorganisms. Additionally, it facilitates the maintenance of microbial activity under CTC pressure by promoting the secretion of extracellular polymeric substances, increasing critical enzyme activity, and enhancing the electron transfer capacity within the system. In this MMT-CS bio-enhanced process, Paracoccus (11.4%) and Bacillus (3.9%) are utilized as essential bacteria genes. The results of metabolic pathways prediction indicated significant enhancements in membrane-transport, nucleotide-metabolism, replication-repair, and lipid-metabolism. Thus, the developed self-supporting MMT-CS bio-enhanced process ensured the stability of the system during the removal of antibiotics.

Chitosan-based film incorporated with silver-loaded organo-bentonite or organo-bentonite: Synthesis and characterization for potential food packaging material.

Biopolymer-clay composite films were synthesized and characterized for food packaging material. The synthesis was conducted in two stages. Cetrimonium bromide-modified bentonite (CTAB-bentonite) was first exchanged with Ag ions to obtain Ag-CTAB-bentonite. Biopolymer-clay composite films were then performed by a solution-casting method between chitosan (biopolymer) and Ag-CTAB-bentonite or between chitosan and CTAB-bentonite. Different weights of CTAB-bentonite (3% and 5% wt.) and Ag-CTAB-bentonite (3% and 5% wt.) were used during the second stage. The resultant films were characterized by X-ray diffraction analysis, Fourier transform infrared spectroscopy, scanning electron microscope coupled with energy dispersive X-ray spectroscopy, atomic force microscopes, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, optical measurement, and others (moisture content, swelling behavior, water solubility, antibacterial, shredded carrot preservation, and biodegradability). Results indicated that the properties (thermal stability, thermomechanical ability, UV-visible light barrier, shredded carrot preservation) of the chitosan-based film incorporated with the synthesized composites were enhanced compared to those of the CS film. The CS/(CTAB-bentonite)-3% and CS/(Ag-CTAB-bentonite)-3% films exhibited antibacterial properties against Escherichia coli, Salmonella enterica subp. enterica, Staphylococcus aureus, and Listeria monocytogenes. The chitosan-based film reinforced with the two prepared composites can be potential for food preservation and packaging.

Thermosensitive curcumin/silver/montmorillonite-F127 hydrogels with synergistic photodynamic/photothermal/silver ions antibacterial activity.

Bacterial infections and the emergence of super-resistant bacteria pose a significant risk to human health. Effective sterilization to prevent the development of bacterial drug resistance remains a challenge. Herein, curcumin/silver/montmorillonite (Cur/Ag/Mt) was prepared through a green chemical reduction method with montmorillonite as the carrier, curcumin as the reducing agent and the capping agent, and citric acid as the structure guide agent. Then, a novel dual light-responsive and thermosensitive Pluronic F127-based hydrogel (CAM-F) was prepared by encapsulating Cur/Ag/Mt within the F127 hydrogel. The Cur/Ag/Mt showed strong absorption in the near-infrared region that efficiently converts light into heat for photothermal therapy when the molar ratio of curcumin to silver nitrate was 2 : 1. Specifically, triangular silver nanoparticles reduced by curcumin were immobilized on the Mt layers, which could enhance photodynamic therapy by the metal-enhanced singlet oxygen and metal-enhanced fluorescence mechanisms. Upon combining 405 nm and 808 nm laser irradiation, the CAM-F hydrogel could simultaneously generate reactive oxygen species, increase the local temperature, and sustain the release of Ag+, thus displaying excellent bactericidal performance against Gram-negative and Gram-positive bacteria. The antibacterial rates of CAM-F hydrogels were 99.26 ± 0.95% and 99.95 ± 0.98% for Escherichia coli and Staphylococcus aureus, respectively. The findings suggest the potential of the CAM-F hydrogel as a stable, biologically safe, and broad-spectrum antimicrobial material. The thermosensitive CAM-F hydrogels for synergetic phototherapy may provide a promising strategy for solving clinical problems caused by pathogenic infections.

Sodium carboxymethyl cellulose hydrogels containing montmorillonite-NaClO2 for postharvest preservation of Chinese bayberries.

Owing to their lack of outer skin, Chinese bayberries are highly susceptible to mechanical damage during picking, which accelerates bacterial invasion and rotting, shortening their shelf life. In this study, montmorillonite (MMT) was used to absorb an aqueous sodium chlorite solution embedded in a carboxymethyl cellulose sodium hydrogel after freeze drying, and the hydrogel was crosslinked by Al3+ ions. Al3+ hydrolyzed to produce H+, creating an acidic environment within the hydrogel and reacting with NaClO2 to slowly release ClO2. We prepared a ClO2 slow-release hydrogel gasket with 0.5 wt% MMT-NaClO2 and investigated its storage effect on postharvest Chinese bayberries. Its inhibition rates against Escherichia coli and Listeria monocytogenes were 98.84% and 98.96%, respectively. The results showed that the gasket preserved the appearance and nutritional properties of the berries. The antibacterial hydrogel reduced hardness loss by 26.57% and ascorbic acid loss by 46.36%. This new storage method could also be applicable to other fruits and vegetables.

Aldehyde-containing clays: a sustainable approach against the olive tree pest, Bactrocera oleae.

A set of organic/inorganic layered materials was obtained by functionalizing a montmorillonite-containing bentonite natural clay with linear aliphatic C6 or C7 aldehydes through a cost-effective and technologically simple incipient-wetness deposition method. The solids were investigated by means of a multi-technique approach (X-ray powder diffraction, XRPD, scanning electron microscopy, SEM, Fourier-transform infrared spectroscopy, FT-IR, thermogravimetric analysis, TGA, elemental analysis and solid-state nuclear magnetic resonance, ssNMR) to clarify the nature of the deposited organic species and the mode of interaction between the aldehyde and the clay. Since both natural clays and short-chain linear aldehydes find application as alternative strategies in the control of the olive fruit fly, Bactrocera oleae, the hybrid layered materials were tested under real-life conditions and their insect-inhibiting capability was evaluated in open-field trials on olive tree orchards in Tuscany, Central Italy. Specific tests were conducted to evaluate the resistance of the solids to weathering and their capability to provide a constant and long-lasting release of the bioactive ingredient. Aldehyde-containing bentonite clays have shown promising performance in controlling B. oleae infestation (with up to 86-95% reduction of affected olive fruits) in open-field trials across two years in two locations with different pedological and meteo-climatic characteristics.

Eco-friendly electronic food labels: Development and application of Ion-SSPB double network hydrogel.

Although various conductive hydrogels have been developed for sensing, ideal materials for meeting the safety and toughness requirements of food detection are still lacking. This study introduces Ion-SSPB, a conductive hydrogel fabricated from eco-friendly, food-grade materials such as corn starch (CS), sodium alginate (SA), polyvinyl alcohol (PVA) and bentonite (BT). It leverages a green manufacturing approach designed for application in electronic food sensors. The hydrogel is achieved through a double network strategy and salt immersion method, which endows it with tunable mechanical and rheological properties. A key innovation of Ion-SSPB is the incorporation of bentonite, which enhances its performance, including low swelling, freezing resistance, and minimal residual adhesion. The hydrogel with 4% (w/v) BT concentration (Ion-SSPB4%) is an effective medium for detecting impedance changes in mangoes, correlating with their ripening stages. The Ion-SSPB hydrogel represents a significant advancement in the field of electronic food labels, combining environmental sustainability with technical efficacy.