RÉSUMÉ
Diquat (DQ) and paraquat (PQ) residues in food are potential hazards to consumers' health. Point-of-care testing (POCT) of them remains challenging. Based on surface-enhanced Raman spectroscopy (SERS) technology, we developed a POCT strategy for DQ and PQ on apple surface and in apple juice. A point-of-use composite was fabricated using a piece of porous melamine sponge (MS) modified with silver nanoflowers (AgNFs), combining the specificity of the SERS fingerprint and the excellent adsorption capacity of MS. Using this dual-functional AgNFs@MS, the on-site determination of the DQ and PQ residues was completed within 3 min without pretreatment. Clear trends were observed between SERS intensity and logarithmic concentrations, with r values from 0.962 to 0.984. The limit of detection of DQ and PQ were 0.14-0.70 ppb in apple juice and on apple surface. This study provides a new point-of-use alternative for rapidly detecting DQ and PQ residues in nonlaboratory settings.
Sujet(s)
Diquat , Contamination des aliments , Malus , Paraquat , Analyse sur le lieu d'intervention , Argent , Analyse spectrale Raman , Triazines , Argent/composition chimique , Paraquat/analyse , Triazines/analyse , Diquat/analyse , Diquat/composition chimique , Malus/composition chimique , Contamination des aliments/analyse , Analyse spectrale Raman/méthodes , Résidus de pesticides/analyse , Résidus de pesticides/composition chimique , Herbicides/analyse , Herbicides/composition chimique , Nanoparticules métalliques/composition chimique , Limite de détection , Jus de fruits et de légumes/analyseRÉSUMÉ
Diquat (DQ) is a typical bipyridine herbicide widely used to control weeds in fields and orchards. The severe toxicity of diquat poses a serious threat to the environment and human health. Metal-organic frameworks (MOFs) have received widespread attention due to their unique physical and chemical properties and applications in the detection of toxic and harmful substances. In this work, a two-dimensional (2D) Tb(III) functionalized MOF Tb(III)@1 (1 = [Cd(HTATB)(bimb)]n·H2O (Cd-MOF), H3TATB = 4,4',4â³-triazine-2,4,6-tribenzoicacid, bimb = 1,4-bis((1H-imidazol-1-yl)methyl)benzene) has been prepared and characterized. Tb(III)@1 has excellent optical properties and high water and chemical stability. After the Tb(III) is fixed by the uncoordinated -COO- in the 1 framework, Tb(III)@1 emits the typical green fluorescence of the lanthanide ion Tb(III) through the "antenna effect". It is worth noting that Tb(III)@1 can be used as a dual emission fluorescence chemical sensor for the ratio fluorescence detection of pesticide DQ, exhibiting a relatively low detection limit of 0.06 nM and a wide detection range of 0-50 nM. After the addition of DQ, a rapid color change of Tb(III)@1 fluorescence from green to blue was observed due to the combined effects of IFE, FRET and dynamic quenching. Therefore, a simple test paper box has been designed for direct on-site determination of pesticide DQ. In addition, the developed sensor has been successfully applied to the detection of DQ in real samples (fruits a Yin-Xia Sun and Bo-Tao Ji contributed equally to this work and should be considered co-first authors.nd vegetables) with satisfactory results. The results indicate that the probe developed in this study has broad application prospects in both real sample detection and actual on-site testing.
Sujet(s)
Diquat , Contamination des aliments , Malus , Réseaux organométalliques , Solanum tuberosum , Terbium , Zea mays , Réseaux organométalliques/composition chimique , Zea mays/composition chimique , Malus/composition chimique , Contamination des aliments/analyse , Diquat/composition chimique , Diquat/analyse , Terbium/composition chimique , Solanum tuberosum/composition chimique , Herbicides/analyse , Herbicides/composition chimique , Cadmium/analyse , Limite de détectionRÉSUMÉ
This study aimed to develop simple, fast, and sensitive methods for the determination of diquat (DQ) in various matrices such as water and beverages. For water, direct injection was tested first, however, the sensitivity of the incurred samples were too low and couldn't possibly achieve the targeted limit of quantification. Hence, dilution with "weaker" injection solvents were tested, and the final conditions involved the dilution of water with acetonitrile (0.4 % ammonium hydroxide) which increased the sensitivity by more than ten times. Nevertheless, the beverages samples needed further treatment to achieve acceptable spiked recovery. The final conditions involved extraction using the aforementioned solvent, followed by heating and partitioning. Both of the methods satisfied the validation requirements, with an average recovery ranging from 85.9 to115 % and associated relative standard deviation (RSD %) within the range 3-8. Further applications on real samples were done to test the levels of contamination.
Sujet(s)
Diquat , , Diquat/analyse , Chromatographie en phase liquide/méthodes , Eau , Spectrométrie de masse en tandem/méthodes , Boissons/analyse , SolvantsRÉSUMÉ
Paraquat (PQ) and diquat (DQ) are quaternary ammonium herbicides which have been used worldwide for controlling the growth of weeds on land and in water. However, PQ and DQ are well known to be toxic. PQ is especially toxic to humans. Moreover, there is no specific antidote for PQ poisoning. The main treatment for PQ poisoning is hemoperfusion to reduce the PQ concentration in blood. Therefore, it is essential to be able to detect PQ and DQ concentrations in biological samples. This critical review summarizes the articles published from 2010 to 2022 and can help researchers to understand the development of the sample treatment and analytical methods for the determination of PQ and DQ in various types of biological samples. The sample preparation includes liquid-liquid extraction, solid-phase extraction based on different novel materials, microextration methods, and other methods. Analytical methods for quantifying PQ and DQ, such as different chromatography and spectroscopy methods, electrochemical methods, and immunological methods, are illustrated and compared. We focus on the latest advances in PQ and DQ treatment and the application of new technologies for these analyses. In our opinion, tandem mass spectrometry is a good choice for the determination of PQ and DQ, due to its high sensitivity, high selectivity, and high accuracy. As far as we are concerned, the best LOD of 4 pg/mL for PQ in serum can be obtained.
Sujet(s)
Herbicides , Paraquat , Humains , Diquat/analyse , Herbicides/analyse , Chromatographie en phase liquide à haute performance , Spectrométrie de masse en tandemRÉSUMÉ
Paraquat (PQ) is one of the most commonly used herbicides, but it has polluted the environment and threatened human health through extensive and improper usage. Here, a new naked-eye PQ immunochromatographic strip was developed to recognize PQ in domestic water and real human samples within 10 min based on a novel custom-designed anti-PQ antibody. The PQ test strip could recognize PQ at a concentration as low as 10 ng/ml, reaching the high-efficiency time-of-flight mass spectrometry detection level and identifying trace amounts of PQ in samples treated with a diquat (DQ) and PQ mixture. Notably, both the performance evaluation and clinical trial of the proposed PQ strips were validated in multiple hospitals and public health agencies. Taken together, our study firstly provide the clinical PQ-targeted colloidal gold immunochromatographic test strip designed both for environment water and human sample detection with multiple advantages, which are ready for environmental monitoring and clinical practice.
Sujet(s)
Herbicides , Paraquat , Humains , Eau , Diquat/analyse , Herbicides/analyse , Spectrométrie de masse/méthodesRÉSUMÉ
An in vivo microcapillary sampling (MCS) method coupled with matrix-assisted laser desorption/ionization fourier transform ion cyclotron resonance mass spectrometry (MALDI-FTICR-MS) analysis was utilized to monitor the real-time bipyridine quaternary ammonium herbicides concentrations and assess their uptake and elimination behaviors in living cabbage plants noninvasively. Under optimized conditions, the proposed method for paraquat (PQ) and diquat (DQ) determination showed wide linear ranges (7.81-500 µg/kg), low limits of detection (0.1-0.9 µg/kg), and good reproducibility. In vivo tracking results demonstrated that different absorption behaviors between PQ and DQ existed in living vegetables and DQ was more easily absorbed. Through decay kinetics model fitting, herbicide half-lives were 1.32 and 1.86 days for PQ and DQ, respectively. To summarize, in vivo MCS method provides valuable information on herbicide risks for agricultural production, which is suitable for temporal, spatial, and longitudinal studies in the same living system and multicompartmental studies in the same organism.
Sujet(s)
Diquat , Herbicides , Cyclotrons , Diquat/analyse , Analyse de Fourier , Herbicides/analyse , Lasers , Paraquat/analyse , Reproductibilité des résultats , Spectrométrie de masse MALDI , LégumesRÉSUMÉ
Screen-printed platforms integrated with molecularly imprinted polymers (MIP) were fabricated and characterized as potentiometric sensors for diquat (DQ). The synthesized MIP beads were studied as sensory carriers in plasticized poly(vinyl chloride) membranes. The sensors were constructed by using poly(3,4-ethylenedioxythiophene) (PEDOT) as solid-contact material to diminish charge-transfer resistance and water layer potential. Conventional ion-selective electrodes (ISEs) with internal filling solution were used for comparison. The designed electrodes showed near Nernstian slopes of 28.2 ± 0.7 (r² = 0.999) over the concentration range of 1.0 × 10-6-1.0 × 10-2 M with the limit of detection 0.026 µg/mL over the pH range 4.2-9.0. The electrode exhibited good selectivity for diquat cations over a large number of organic and inorganic cations. The sensor was successfully introduced for direct measurement of diquat content in commercial pesticide preparations and different spiked potato samples. The results showed that the proposed electrode has a fast and stable response, good reproducibility, and applicability for direct assessment of diquat content. The proposed potentiometric method is simple and accurate in comparison with the reported HPLC methods. Besides, it is applicable to turbid and colored sample solutions.
Sujet(s)
Biomimétique , Diquat , Herbicides , Diquat/analyse , Électrodes , Herbicides/analyse , Potentiométrie , Reproductibilité des résultatsRÉSUMÉ
A selective, sensitive and robust LC-MS/MS method is reported for the determination of the residues of paraquat and diquat in various fruit matrices, including grape, apple and pomegranate. The extraction with acidified water (0.1 M HCl) at 80°C (15 min) offered superior recoveries for both analytes with a significantly lower matrix effects as compared to the extraction with acidified methanol by the methods reported in the existing literature. The optimised HPLC conditions on hydrophilic interaction liquid chromatography (HILIC) columns, when coupled with electrospray ionisation-tandem mass spectrometry, offered their limit of quantification at 0.01 mg kg-1. The analysis on an XBridge HILIC column required a thorough optimisation of the gradient programme to induce chromatographic separation and minimise matrix effects. This was not necessary when a CORTECS HILIC column was used, which provided selective and sensitive analysis within 5 min runtime using isocratic flow. Isotopically labelled internal standards corrected the recoveries of both analytes within 70-120% (RSD < 20%). For the first time, the applications of high resolution accurate mass analysis in the 'time of flight - multiple reaction monitoring' mode have been demonstrated as a complementary means of targeted screening of these compounds at 0.01 mg kg-1 level. The method has a strong potential for applications in both official control and by those involved in food production for checking compliance with the EU MRLs.
Sujet(s)
Diquat/analyse , Herbicides/analyse , Tests de criblage à haut débit , Paraquat/analyse , Spectrométrie de masse en tandem , Chromatographie en phase liquide , Fruit/composition chimique , Interactions hydrophobes et hydrophiles , Lythraceae/composition chimique , Malus/composition chimique , Vitis/composition chimiqueRÉSUMÉ
In this study, a modified Quick Polar Pesticides (QuPPe) method, optimized by a central composite design, was developed to determine quaternary ammonium pesticides (QUATs) residues in barley and wheat by ultra-high-performance liquid chromatographic tandem mass spectrometry (UHPLC-MS/MS) using a hydrophilic interaction chromatography (HILIC) column. Considering the high polarity of these compounds, special conditions of sample preparation and analysis are required. Different mobile phases, extraction procedure and clean-up were evaluated. An isocratic elution with aqueous solution of ammonium formate 60 mmol L-1 (pH 3.7) and acetonitrile, 40:60 (v/v), was selected. Water and acidified methanol as extraction solvent, without heating, and a clean-up with dichloromethane, chitosan and acetonitrile presented good results. The validated method presented satisfactory selectivity, linearity, matrix effect, trueness and precision, providing recoveries from 93 to 110% with RSD < 13% for barley, and 70 to 115% with RSD < 18% for wheat. The complexity of these matrices requires the calibration in matrix and the diluted standard addition calibration (DSAC) procedure has been shown to be an excellent option to compensate for the matrix effect and the losses of the analytes in the extraction. Real samples of barley and wheat were analyzed and 60% presented concentrations of paraquat above the maximum limits allowed by the European Union. The modified QuPPe method combined with DSAC and HILIC-UHPLC-MS/MS demonstrated to be an effective approach to determine QUATs in barley and wheat, and is a good alternative for routine analysis. The use of the biosorbent chitosan is effective, low cost and more ecological when compared to others conventional sorbents.
Sujet(s)
Chromatographie en phase liquide , Analyse d'aliment/instrumentation , Analyse d'aliment/méthodes , Hordeum/composition chimique , Pesticides/analyse , Spectrométrie de masse en tandem , Triticum/composition chimique , Calibrage , Chlorméquat/analyse , Diquat/analyse , Paraquat/analyse , Pipéridines/analyse , Composés d'ammonium quaternaire/analyseRÉSUMÉ
In this study, carbon nanotube-based adsorbents, oxidized multi-walled carbon nanotube (OMWCNT) with non-magnetic property and OMWCNT-Fe3O4 and OMWCNT-κ-carrageenan-Fe3O4 nanocomposites with magnetic property, having different structural and surface properties were prepared and their adsorptive properties for the removal of toxic diquat dibromide (DQ) herbicide from water by adsorption were determined in detail. For each adsorption system, the effects of initial DQ concentration, contact time and temperature on the adsorption processes were determined. Equilibrium time was found to be 300â¯min for DQ solutions. OMWCNT showed faster adsorption and higher maximum adsorption capacity value than magnetic adsorbents. With increasing initial herbicide concentration from 5.43â¯mg.L-1 to 16.3â¯mg.L-1, the values of initial sorption rate exhibited a decrease from 29.1â¯mg.g-1.min-1 to 4.28â¯mg.g-1.min-1 for OMWCNT-DQ system, from 1.21â¯mg.g-1.min-1 to 0.823â¯mg.g-1.min-1 for OMWCNT-Fe3O4-DQ system and from 0.674â¯mg.g-1.min-1 to 0.612â¯mg.g-1.min-1 OMWCNT-κ-carrageenan-Fe3O4 system. Maximum adsorption capacity value of OMWCNT was approximately 2.8-fold higher than magnetic OMWCNT-Fe3O4 and 5.4-fold higher than magnetic OMWCNT-κ-carrageenan-Fe3O4 at 25⯰C. Adsorption kinetic and isotherm data obtained for all adsorption systems were well-fitted by pseudo second-order and Langmuir models, respectively. Thermodynamic parameters indicated that the adsorption of DQ onto carbon nanotube-based adsorbents was spontaneous and endothermic process. Furthermore, OMWCNT having the highest herbicide adsorption capacity could be regenerated and reused at least five times. This study showed that carbon nanotube-based adsorbents with magnetic and non-magnetic property were of high adsorption performance for the removal of DQ from water and could be promising adsorbent materials for the efficient removal of herbicides from wastewaters.
Sujet(s)
Diquat/composition chimique , Herbicides/composition chimique , Nanoparticules de magnétite/composition chimique , Nanocomposites/composition chimique , Nanotubes de carbone/composition chimique , Polluants chimiques de l'eau/composition chimique , Purification de l'eau/méthodes , Adsorption , Carragénane , Diquat/analyse , Herbicides/analyse , Concentration en ions d'hydrogène , Oxydoréduction , Propriétés de surface , Thermodynamique , Eau/composition chimique , Polluants chimiques de l'eau/analyseRÉSUMÉ
This work reports a study about the adsorption of the herbicides diquat and difenzoquat from aqueous medium employing polyurethane foam (PUF) as the adsorbent and sodium dodecylsulfate (SDS) as the counter ion. The adsorption efficiency was shown to be dependent on the concentration of SDS in solution, since the formation of an ion-associate between cationic herbicides (diquat and difenzoquat) and anionic dodecylsulfate is a fundamental step of the process. A computational study was carried out to identify the possible structure of the ion-associates that are formed in solution. They are probably formed by three units of dodecylsulfate bound to one unit of diquat, and two units of dodecylsulfate bound to one unit of difenzoquat. The results obtained also showed that 95% of both herbicides present in 45mL of a solution containing 5.5mgL-1 could be retained by 300mg of PUF. The experimental data were well adjusted to the Freundlich isotherm (r2 ≥ 0.95) and to the pseudo-second-order kinetic equation. Also, the application of Morris-Weber and Reichenberg equations indicated that an intraparticle diffusion process is active in the control of adsorption kinetics.
Sujet(s)
Diquat/analyse , Herbicides/analyse , Polyuréthanes/composition chimique , Pyrazoles/analyse , Polluants chimiques de l'eau/analyse , Adsorption , Diffusion , Diquat/composition chimique , Herbicides/composition chimique , Concentration en ions d'hydrogène , Cinétique , Pyrazoles/composition chimique , Dodécyl-sulfate de sodium/composition chimique , Solutions , Polluants chimiques de l'eau/composition chimiqueRÉSUMÉ
Gallic acid (GA) was employed as a reducing agent for facile in situ preparation of gold nanorods (GNRs) in thermoresponsive P(NIPAM-NVP) hydrogel films. Based on the surface-enhanced Raman scattering (SERS) effect of GNRs and the enrichment effect of thermoresponsive hydrogel film on test molecules through a shrinkage process, the obtained P(NIPAM-NVP)/GNRs composites have been used as SERS substrate for the rapid detection of diquat. The influences of substrate pre-treatment, laser wavelength, and sample treatment method on diquat determination have been investigated comprehensively. The results showed the composite material to be a good SERS substrate for highly sensitive detection and a promising preconcentration matrix of diquat. The limit of detection of the proposed protocol was estimated to be 2.7×10-13molL-1 for diquat. Notably, diquat could be concentrated with the enrichment factor of about 4 after three times swelling-shrinking processes of the hydrogel film.
Sujet(s)
Diquat/analyse , Or/composition chimique , Hydrogels/composition chimique , Nanocomposites/composition chimique , Nanotubes/composition chimique , Température , Résines acryliques/composition chimique , Acide gallique/composition chimique , Lasers , Limite de détection , Analyse spectrale RamanRÉSUMÉ
A simple, modified quick, easy, cheap, effective, rugged, and safe procedure was developed for the determination of diquat in potato using reversed-phase LC coupled with tandem MS (MS/MS) in a total run time of 10 min. Different sample preparation parameters (pH modifier type, sample size, and elevated temperature) were tested and optimized. Potato sample was extracted with acetonitrile in the presence of ammonium hydroxide at 80°C. Phase separation was obtained by shaking the extract with magnesium sulfate and sodium chloride, and analysis was done using LC-MS/MS. Matrix-matched standard calculations were used to compensate for matrix-induced suppression in LC-MS/MS determination. The precision and trueness of the method were determined from recovery experiments on five replicates of spiked blank potato samples at 0.01, 0.05, and 0.1 mg/kg. The range of the obtained recoveries was 74-110%, with RSD values <5% for all the concentrations.
Sujet(s)
Diquat/analyse , Analyse d'aliment/méthodes , Solanum tuberosum/composition chimique , Chromatographie en phase inverse , Spectrométrie de masse en tandemRÉSUMÉ
A new approach based on the integration of the free liquid membrane (FLM) into electrokinetic supercharging (EKS) was demonstrated to be a new powerful tool used in order to enhance online preconcentration efficiency in capillary electrophoresis (CE). A small plug of water immiscible organic solvent was used as a membrane interface during the electrokinetic sample injection step in EKS in order to significantly enhance the analyte stacking efficiency. The new online preconcentration strategy was evaluated for the determination of paraquat and diquat present in the environmental water samples. The optimised FLM-EKS conditions employed were as follows: hydrodynamic injection (HI) of 20mM potassium chloride as leading electrolyte at 50mbar for 75s (3% of the total capillary volume) followed by the HI of tris(2-ethylhexyl) phosphate (TEHP) as FLM at a 1mm length (0.1% of the capillary volume). The sample was injected at 10kV for 360s, followed by the HI of 20mM cetyl trimethylammonium bromide (CTAB) as terminating electrolyte at 50mbar for 50s (2% of the total capillary volume). The separation was performed in 12mM ammonium acetate and 30mM NaCl containing 20% MeOH at +25kV with UV detection at 205nm. Under optimised conditions, the sensitivity was enhanced between 1500- and 1866-fold when compared with the typical HI at 50mbar for 50s. The detection limit of the method for paraquat and diquat was 0.15-0.20ng/mL, with RSDs below 5.5%. Relative recoveries in spiked river water were in the range of 95.4-97.5%. A comparison was also made between the proposed approach with sole preconcentration of the field-enhanced sample injection (FASI) and EKS in the absence of the FLM.
Sujet(s)
Électrophorèse capillaire/méthodes , Herbicides/analyse , Membrane artificielle , Polluants chimiques de l'eau/analyse , Cations , Diquat/analyse , Limite de détection , Paraquat/analyse , Analyse de régression , Reproductibilité des résultats , Rivières/composition chimiqueRÉSUMÉ
This study describes the optimization and single-laboratory validation of a single residue method for determination of two bipyridylium herbicides, paraquat and diquat, in cowpeas by UPLC-MS/MS in a total run time of 9.3min. The method is based on extraction with an acidified methanol-water mixture. Different extraction parameters (extraction solvent composition, temperature, sample extract filtration, and pre-treatment of the laboratory sample) were evaluated in order to optimize the extraction method efficiency. Isotopically labeled internal standards, Paraquat-D6 and Diquat-D4, were used and added to the test portions prior to extraction. The method validation was performed by analyzing spiked samples at three concentrations (10, 20 and 50µgkg(-1)), with seven replicates (n=7) for each concentration. Linearity (r(2)) of analytical curves, accuracy (trueness as recovery % and precision as RSD%), instrument and method limits of detection and quantification (LOD and LOQ) and matrix effects were determined. Average recoveries obtained for diquat were between 77 and 85% with RSD values ⩽20%, for all spike levels studied. On the other hand, paraquat showed average recoveries between 68 and 103% with RSDs in the range 14.4-25.4%. The method LOQ was 10 and 20µgkg(-1) for diquat and paraquat, respectively. The matrix effect was significant for both pesticides. Consequently, matrix-matched calibration standards and using isotopically labeled (IL) analogues as internal standards for the target analytes are required for application in routine analysis. The validated method was successfully applied for cowpea samples obtained from various field studies.
Sujet(s)
Chromatographie en phase liquide/méthodes , Diquat/analyse , Contamination des aliments/analyse , Paraquat/analyse , Résidus de pesticides/analyse , Spectrométrie de masse en tandem/méthodes , Calibrage , Limite de détection , Reproductibilité des résultats , Graines/composition chimique , Vigna/composition chimiqueRÉSUMÉ
With the rapid development of analytical techniques, it has become much easier to detect chemical and biological analytes, even at very low detection limits. In recent years, techniques based on vibrational spectroscopy, such as surface enhanced Raman spectroscopy (SERS), have been developed for non-destructive detection of pathogenic microorganisms. SERS is a highly sensitive analytical tool that can be used to characterize chemical and biological analytes interacting with SERS-active substrates. However, it has always been a challenge to obtain consistent and reproducible SERS spectroscopic results at complicated experimental conditions. Microfluidics, a tool for highly precise manipulation of small volume liquid samples, can be used to overcome the major drawbacks of SERS-based techniques. High reproducibility of SERS measurement could be obtained in continuous flow generated inside microfluidic devices. This article provides a thorough review of the principles, concepts and methods of SERS-microfluidic platforms, and the applications of such platforms in trace analysis of chemical and biological analytes.
Sujet(s)
Techniques de biocapteur/méthodes , Techniques d'analyse microfluidique/méthodes , Microfluidique , Analyse spectrale Raman/méthodes , ADN/analyse , Diquat/analyse , Limite de détection , Staphylococcus aureus résistant à la méticilline/composition chimique , Reproductibilité des résultats , Propriétés de surfaceRÉSUMÉ
We report the fast and sensitive trace analysis of diaquat dibromide monohydrate (DQ) in water using a surface-enhanced Raman scattering (SERS)-based microdroplet sensor. This sensor is composed of two compartments: the first one is for droplet generation for fresh silver nanoparticle (AgNP) synthesis and the second for droplet merging for SERS detection. Silver ions were nucleated and grown to large size AgNPs in droplets, and then each droplet was synchronously merged with another droplet containing DQ for SERS detection. This two-phase liquid-liquid segmented flow system prevented memory effects caused by the precipitation of nanoparticle aggregates on channel walls because the aqueous droplets were isolated by a continuous oil phase. The limit of detection (LOD) of DQ in water was determined to be below 5 nM, which satisfies the maximum contaminant level defined by the United States EPA. This method was also validated successfully in DQ-spiked tap water. The SERS-based integrated sensing system is expected to be useful as an in-the-field sensing platform for fast and reproducible trace analysis of environmental pollutants in water.
Sujet(s)
Bromures/analyse , Diquat/analyse , Surveillance de l'environnement/méthodes , Analyse spectrale Raman , Polluants chimiques de l'eau/analyse , Colloïdes/composition chimique , Ions , Limite de détection , Nanoparticules métalliques/composition chimique , Microfluidique , Microsphères , Nanotechnologie , Argent/composition chimique , Eau/composition chimiqueRÉSUMÉ
Sample clean-up by cloud point phase separation and analysis by capillary electrophoresis with stacking was developed for quaternary ammonium herbicides (i.e., paraquat and diquat) in milk. For sample clean-up, a mixture of 845µL of milk sample, 5µL of 100mM phosphoric acid, and 150µL of Triton X-114 was heated (60°C for 2min) and centrifugated (3000rpm for 2min) in 2-mL Eppendorf tube. The upper phase was directly analysed by capillary electrophoresis via electrokinetic injection at 10kV for 150s. The separation electrolyte was 100mM phosphate buffer with 20% acetonitrile at pH 2.5. Before sample injection, a micellar solution (10mM SDS in 80mM phosphate buffer at pH 2.5) and an organic solvent rich solution (30% ACN) was hydrodynamically introduced into the capillary. These solutions provided the necessary conditions for stacking the cationic herbicides via the combination of field enhanced sample injection and micelle to solvent stacking. The LODs (S/N=3) obtained from the entire strategy for paraquat and diquat in milk was 0.004 and 0.018µg/mL, respectively. This is 1.5 to >2 orders of magnitude better than the corresponding LODs obtained from the electrophoretic analysis of herbicide standards prepared in the separation electrolyte. The strategy was also successfully applied to 5 milk samples available in the market.
Sujet(s)
Électrophorèse capillaire , Technologie alimentaire/instrumentation , Technologie alimentaire/méthodes , Herbicides/analyse , Lait/composition chimique , Animaux , Diquat/analyse , Micelles , Octoxinol , Paraquat/analyse , Polyéthylène glycols/analyse , Reproductibilité des résultatsRÉSUMÉ
We have developed a colorimetric and fluorescent dual-response probe for the detection of paraquat and diquat in aqueous solutions based on an anionic polythiophene derivative. The detection limit of this approach can be as low as 10(-9) M by fluorescence measurements.
Sujet(s)
Diquat/analyse , Paraquat/analyse , Polymères/analyse , Thiophènes/analyse , Colorimétrie/méthodes , Diquat/composition chimique , Colorants fluorescents/composition chimique , Paraquat/composition chimique , Polymères/composition chimique , Spectrométrie de fluorescence/méthodes , Thiophènes/composition chimiqueRÉSUMÉ
Liquid chromatography tandem mass spectrometry (LC-MS/MS) determination of quaternary ammonium herbicides diquat (DQ) and paraquat (PQ) can be very challenging due to their complicated chromatographic and mass spectrometric behaviors. Various multiple reaction monitoring (MRM) transitions from radical cations M(+) and singly charged cations [M-H](+), have been reported for LC-MS/MS quantitation under different chromatographic and mass spectrometric conditions. However, interference peaks were observed for certain previously reported MRM transitions in our study. Using a Dionex Acclaim(®) reversed-phase and HILIC mixed-mode LC column, we evaluated the most sensitive MRM transitions from three types of quasi-molecular ions of DQ and PQ, elucidated the cross-interference phenomena, and demonstrated that the rarely mentioned MRM transitions from dications M(2+) offered the best selectivity for LC-MS/MS analysis. Experimental parameters, such as IonSpray (IS) voltage, source temperature, declustering potential (DP), column oven temperature, collision energy (CE), acid and salt concentrations in the mobile phases were also optimized and an uncommon electrospray ionization (ESI) capillary voltage of 1000V achieved the highest sensitivity. Employing the proposed dication transitions 92/84.5 for DQ and 93/171 for PQ, the direct aqueous injection LC-MS/MS method developed was able to provide a method detection limit (MDL) of 0.1µg/L for the determination of these two herbicides in drinking water.