Assessment of internal exposure risk from metals pollution of occupational and non-occupational populations around a non-ferrous metal smelting plant.

Non-ferrous metal smelting poses significant risks to public health. Specifically, the copper smelting process releases arsenic, a semi-volatile metalloid, which poses an emerging exposure risk to both workers and nearby residents. To comprehensively understand the internal exposure risks of metal(loid)s from copper smelting, we explored eighteen metal(loid)s and arsenic metabolites in the urine of both occupational and non-occupational populations using inductively coupled plasma mass spectrometry with high-performance liquid chromatography and compared their health risks. Results showed that zinc and copper (485.38 and 14.00 µg/L), and arsenic, lead, cadmium, vanadium, tin and antimony (46.80, 6.82, 2.17, 0.40, 0.44 and 0.23 µg/L, respectively) in workers (n=179) were significantly higher compared to controls (n=168), while Zinc, tin and antimony (412.10, 0.51 and 0.15 µg/L, respectively) of residents were significantly higher than controls. Additionally, workers had a higher monomethyl arsenic percentage (MMA%), showing lower arsenic methylation capacity. Source appointment analysis identified arsenic, lead, cadmium, antimony, tin and thallium as co-exposure metal(loid)s from copper smelting, positively relating to the age of workers. The hazard index (HI) of workers exceeded 1.0, while residents and control were approximately at 1.0. Besides, all three populations had accumulated cancer risks exceeding 1.0 × 10-4, and arsenite (AsIII) was the main contributor to the variation of workers and residents. Furthermore, residents living closer to the smelting plant had higher health risks. This study reveals arsenic exposure metabolites and multiple metals as emerging contaminants for copper smelting exposure populations, providing valuable insights for pollution control in non-ferrous metal smelting.

Renal excretion of 1,2-dihydroxynaphthalene (DHN) in firefighting instructors after exposure to polycyclic aromatic hydrocarbons (PAHs) during live fire training.

Exposure of firefighting instructors to polycyclic aromatic hydrocarbons (PAHs) such as naphthalene is unavoidable during live fire training. The study aimed to investigate naphthalene uptake by measuring the urinary excretion of the naphthalene metabolite 1,2-dihydroxynaphthalene (DHN), to describe the DHN elimination kinetics and to evaluate the results by comparison to further biomarkers of PAH exposure. N = 6 male non-smoking firefighting instructors completed five training sessions each in a residential fire simulation unit under respiratory protection. All participants provided two urine samples before and another seven samples within an 18-h-interval after each session. DHN was detected by gas chromatography/tandem mass spectrometry (GC-MS/MS) in all samples (n = 237) with median concentrations ranging from 3.3 µg/g crea. (range 0.9-10.2) before exposure to 134.2 µg/g crea. (43.4-380.4) post exposure. Maximum elimination found 3.3 h (median) after onset of exposure decreased with a mean half-life of 6.6 h to 27.1 µg/g crea. (15.7-139.5) 18 h after training. DHN sensitively indicated a presumed dermal naphthalene intake during training, showing similar elimination kinetics like other naphthalene metabolites. Internal exposure of the participants transiently exceeded exposures determined for non-smokers in the general population, but was lower than at other workplaces with PAH exposure. Despite limited uptake, accumulation is possible with daily exposure.

Monitoring of surgical staff x-ray exposure in the operating room with DosiBadge.

Surgical procedures involving the use of x-rays in the operating room (OR) have increased in recent years, thereby increasing the exposure of OR staff to ionizing radiation. An individual dosimeter makes it possible to record the radiation exposure to which these personnel are exposed, but there is a lack of compliance in the wearing of these dosimeters for several practical reasons. This makes the dose results obtained unreliable. To try to improve the rate of dosimeter wearing in the OR, the Dosibadge project studied the association of the individual dosimeter with the hospital access badge, forming the Dosibadge. Through a study performed at the Tours University Hospital in eight different ORs for two consecutive periods of 3 months. The results show a significant increase in the systematic use of the dosimeter thanks to the Dosibadge, which improves the reliability of the doses obtained on the dosimeters and the monitoring of personnel. The increase is especially marked with clinicians. Following these results and the very positive feedback to this first single-centre study, we are then planning a second multicentre study to validate our proof of concept on different sites, with the three brands of individual dosimeters used in France i.e. dosimeters supplied by Dosilab; Landauer and IRSN.

Assessment and mitigation of radiation hazard for individuals engaged in reconnaissance survey in uranium exploration in Jharkhand, India.

The present study attempts to obtain an a priori estimate of the absorbed dose received by an individual engaged in the reconnaissance survey in Uranium exploration using a predictive mathematical regression analysis. Other radiation safety parameters such as excess lifetime cancer risk are also calculated. Study reflects that the proper handling of naturally occurring radioactive materials accounts for an absorbed dose significantly less than the prescribed limit.

Role of independent research at AERB for ensuring safety of nuclear facilities in India.

The mission of Atomic Energy Regulatory Board (AERB) of India is to ensure that the use of ionising radiation and nuclear energy in India does not cause unacceptable impact on the workers, members of the public and to the environment. AERB has the mandate to carry out detailed safety review for the siting, construction, commissioning, operation and decommissioning of nuclear and radiation facilities established within the country. To deliver and maintain a strong, credible and technically sound regulation, AERB has established the Safety Research Institute (SRI) at Kalpakkam with a robust technical infrastructure and wide knowledge base. This paper highlights the independent safety research activities carried out at SRI and its role to support and facilitate the decision-making process by AERB at various stages of regulatory review for ensuring safety of the nuclear facilities in India.

Efficacy of radiation attenuating caps in reducing radiation doses received at the cerebral level in interventional physicians: a systematic review.

Background.Anecdotal reports are appearing in the scientific literature about cases of brain tumors in interventional physicians who are exposed to ionizing radiation. In response to this alarm, several designs of leaded caps have been made commercially available. However, the results reported on their efficacy are discordant.Objective.To synthesize, by means of a systematic review of the literature, the capacity of decreasing radiation levels conferred by radiation attenuating devices (RADs) at the cerebral level of interventional physicians.Methodology.A systematic review was performed including the following databases: MEDLINE, SCOPUS, EBSCO, Science Direct, Cochrane Controlled Trials Register (CENTRAL), WOS, WHO International Clinical Trials Register, Scielo and Google Scholar, considering original studies that evaluated the efficacy of RAD in experimental or clinical contexts from January 1990 to May 2023. Data selection and extraction were performed in triplicate, with a fourth author resolving discrepancies.Results.Twenty articles were included in the review from a total of 373 studies initially selected from the databases. From these, twelve studies were performed under clinical conditions encompassing 3801 fluoroscopically guided procedures, ten studies were performed under experimental conditions with phantoms, with a total of 88 procedures, four studies were performed using numerical calculations with a total of 63 procedures. The attenuation and effectiveness of provided by the caps analyzed in the present review varying from 12.3% to 99.9%, and 4.9% to 91% respectively.Conclusion.RAD were found to potentially provide radiation protection, but a high heterogeneity in the shielding afforded was found. This indicates the need for local assessment of cap efficiency according to the practice.

Similar experimental study on diffusion and distribution of diesel exhaust in confined space of a coal mine.

In the confined space of the underground coal mine, which is dominated by transportation lanes, explosion-proof diesel-powered trackless rubber-wheeled vehicles are becoming the main transportation equipment, and the exhaust gas produced by them is hazardous to the health of workers and pollutes the underground environment. In this experiment, a similar test platform is built to study the effects of wind speed, vehicle speed, and different wind directions on the diffusion characteristics of exhaust gas. In this paper, CO and SO2 are mainly studied. The results show that the diffusion of CO and SO2 gas is similar and the maximum SO2 concentration only accounts for 11.4% of the CO concentration. Exhaust gas is better diluted by increasing the wind speed and vehicle speed, respectively. Downwind is affected by the reverse wind flow and diffuses to the driver's position, which is easy to cause occupational diseases. When the wind is a headwind, the exhaust gases spread upwards and make a circumvention movement, gathering at the top. When the wind speed and vehicle speed are both 0.6 m/s, the CO concentration corresponds to the change trend of the Lorentz function when the wind is downwind and the CO concentration corresponds to the change trend of the BiDoseResp function when the wind is headwind. The study of exhaust gas diffusion characteristics is of great significance for the subsequent purification of the air in the restricted mine space and the protection of the workers' occupational health.

Effect of occupational exposure to vat-textile dyes on follicular and luteal hormones in female dye workers in Abeokuta, Nigeria.

Background: Some synthetic dyes used mainly in textile industries have been associated with endocrine disruption, resulting in infertility, among other disorders. It is unknown if occupational exposure to Vat textile dyes among premenopausal dyers alters hormonal levels. Objectives: We aimed at determining the probable effects of occupational exposure to Vat dyes on reproductive hormones of female textile dyers in the follicular and luteal phases while relating this to age categories and duration of exposure. Methods: Thirty-three premenopausal Vat textile dyers at "Itoku", Abeokuta, Nigeria, among a population of about 80 female dyers were age and sex-matched with 55 non-exposed (control) female participants. Using semi-structured questionnaires, socio-demographic, occupational details and the LMP of participants were obtained. Serum samples were collected in follicular and luteal phases and assayed for female sex hormones using Enzyme Immunoassay. Mann-Whitney U and Z- statistic were used for comparison of the two groups. P-value < 0.05 was considered to be significant. Results: In the follicular phase, the result showed a lower mean FSH ranking (in age category ≤20 years) and higher (p<0.05) Estradiol ranking (in age category 31-40 years) in the exposed than the unexposed. Mean ranks of Progesterone and Estradiol in the luteal phase (age category 31-40 years) were higher (p<0.05) in the exposed, while Estradiol (age category ≥41years) ranked lower (p<0.05). Prolactin demonstrated a significant inverse relationship with the duration of exposure. Conclusion: Occupational exposure to Vat dye among female dyers in Abeokuta is associated with some sex hormone disruption which appears to be age and duration of exposure-related.

[Status of occupational exposure limits of air toxic substances in the GESTIS Substances Database].

Objective: In order to understand the current situation of air toxic substances without occupational exposure limits (OELs) in the workplace in the Germany GESTIS Substance Database, and to provide an effective reference for formulating OELs of corresponding toxic substances and improving health standards. Methods: From March 2022 to May 2023, based on the standard of GBZ 2.1-2019 Occupational Exposure Limits for Hazardous Agents in the Workplace-Part 1: Chemical Hazardous Agents, air toxic substances without OELs in the standard of GBZ/T 300.1-2017 Determination of Toxic Substances in Workplace Air-Part 1: General Principles were screened out, then corresponding OELs in other countrie/regions were queried through the Germany GESTIS Substance Database. Results: Among the 333 kinds (classes) of air toxic substances in 160 parts of GBZ/T 300.1-2017 standard, 48 kinds (classes) of air toxic substances were screened out and had not yet been formulated OELs in GBZ 2.1-2019 standard. By querying the Germany GESTIS Substance Database, it was found that among the 48 kinds (classes) of air toxic substances, 35 kinds (classes) of air toxic substances had both 8-hour occupational exposure limit and short-term occupational exposure limit, 4 kinds (classes) of air toxic substances had 8-hour occupational exposure limit but no short-term occupational exposure limit, 9 kinds (classes) of air toxic substances hadn't been retrieved any OELs. In addition, standard test methods of 7 kinds of air toxic substances hadn't been published in the present, including trimethylchlorosilane, trimethylbenzenes, cumene, chloroethane, chloropropane, dibromoethane and acetophenone. Conclusion: In the process of formulating or revising the standards of GBZ 2.1-2019 and GBZ/T 300, the latest published OELs in the Germany GESTIS Substance Database could be used as a reference basis.

[Establishment of collection methods and laboratory testing methods for active pharmaceutical ingredient in the workplace air].

Objective: To establish collection methods and laboratory testing methods for qualitative and quantitative analysis of 9 typical active pharmaceutical ingredient in the workplace air. Methods: In December 2021, a mixed solution of nine analytes was prepared and then dispersed in aerosol state to simulate sampling. Glass fiber filter membrane was selected as air collector and collected active pharmaceutical ingredient in the air at a rate of 2.0 L/min for 15 minutes. Then, the obtained filter membrane samples were eluted with 25%ACN/75%MeOH. Finally, the eluent was qualitatively and quantitatively analyzed with liquid chromatography-triple quadrupole mass spectrometer. Results: This method could effectively collect active pharmaceutical ingredient in the air, with an average sampling efficiency of more than 98.5%. The linear correlation coefficient r was greater than 0.9990. The lower limit of quantification for each analyte ranged from 0.6~500.0 ng/ml, and the average recovery rate ranged from 97.6%~102.5%. Conclusion: This method could simultaneously collect 9 active pharmaceutical ingredient in the workplace air, and could provide accurate qualitative and quantitative analysis in subsequent laboratory tests.

Benzene Exposure in Workers From a Waste Oil Regeneration Plant During Ordinary Activities by Air and Biological Monitoring.

BACKGROUND: In the regeneration of waste oil, a strategical technological process for the European Union circular economy action plan, exhausted oils are regenerated to produce high performing oil bases. Aim of this work was to assess the exposure to benzene in plant workers during ordinary activities. METHODS: 59 workers, potentially exposed to benzene, and 9 administrative workers from an Italian plant were monitored for the whole work shift with personal air samplers; urinary benzene (BEN-U) and S-phenyl mercapturic acid (SPMA) were measured by mass spectrometry methods in end-shift urine samples. Different job tasks were identified among workers. RESULTS: Median (minimum-maximum) airborne exposures to benzene were <0.9 (<0.9-6.3) and <0.9 (<0.9-0.9) µg/m3, BEN-U and SPMA levels were 0.094 (<0.015-3.095) µg/L and 0.15 (<0.10-9.67) µg/g crt and 0.086 (0.034-0.712) µg/L and <0.10 (<0.10-3.19) µg/g creatinine in workers and administrative workers, respectively. No differences were found among job tasks and between workers and administrative workers, while higher levels were found in smokers than in non-smokers. For all job tasks, the exposure to benzene was always below occupational limit values. CONCLUSIONS: This study has investigated for the first time the exposure to benzene of workers employed in the re-refining of exhaust oil. The results showed that normal production activities in regenerating used oils do not pose a risk of exposure to benzene in workers.

Source Apportionment of Particulate Matter in a Metal Workshop.

Metal workshops are workplaces with the substantial production of particulate matter (PM) with high metal content, which poses a significant health risk to workers. The PM produced by different metal processing techniques differs considerably in its elemental composition and size distribution and therefore poses different health risks. In some previous studies, the pollution sources were isolated under controlled conditions, while, in this study, we present a valuable alternative to characterize the pollution sources that can be applied to real working environments. Fine PM was sampled in five units (partially specializing in different techniques) of the same workshop. A total of 53 samples were collected with a temporal resolution of 30 min and 1 h. The mass concentrations were determined gravimetrically, and the elemental analysis, in which the concentrations of 14 elements were determined, was carried out using the X-ray fluorescence technique. Five sources of pollution were identified: background, steel grinding, metal active gas welding, tungsten inert gas welding, and machining. The sources were identified by positive matrix factorization, a statistical method for source apportionment. The identified sources corresponded well with the work activities in the workshop and with the actual sources described in previous studies. It is shown that positive matrix factorization can be a valuable tool for the identification and characterization of indoor sources.

Evaluation of flow controllers used with evacuated canisters to assess VOC exposures in occupational and non-occupational environments.

Ideally, measuring exposures to volatile organic compounds should allow for modifying sampling duration without loss in sensitivity. Traditional sorbent-based sampling can vary sampling duration, but sensitivity may be affected when capturing shorter tasks. Diaphragm and capillary flow controllers allow for a range of flow rates and sampling durations for air sampling with evacuated canisters. The goal of this study was to evaluate the extent to which commercialized capillary flow controllers satisfy the bias (±10%) and accuracy (±25%) criteria for air sampling methods as established by the National Institute for Occupational Safety and Health (NIOSH) using the framework of ASTM D6246 Standard Practice for Evaluating the Performance of Diffusive Samplers to compare their performance with diaphragm flow controllers in a long-term field study. Phase 1 consisted of a series of laboratory tests to evaluate capillary flow controller flow rates with respect to variations in temperature (-15-24 °C). The results demonstrated a slight increase in flow rate with lower temperatures. In Phase 2, the capillary flow controller was evaluated utilizing a matrix of parameters, including time-weighted average concentration, peak concentration (50-100× base concentration), air velocity across the sampler inlet (0.41-0.5 m/s), relative humidity (20-80%), and temperature (10-32 °C). Comparison of challenge concentrations with reference concentrations revealed the aggregate bias and overall accuracy for four tested compounds to be within the range of criteria for both NIOSH and ASTM standards. Additionally, capillary flow controllers displayed lower variability in flow rate and measured concentration (RSD: 2.4% and 4.3%, respectively) when compared with diaphragm flow controllers (RSD: 6.9% and 7.2%, respectively) for 24-hr laboratory tests. Phase 3 involved further testing of flow rate variability for both diaphragm and capillary flow controllers in a field study. The capillary flow controller displayed a lower level of variability (RSD: 5.2%) than the diaphragm flow controller (RSD: 8.0%) with respect to flow rate, while allowing for longer durations of sampling.

Evaluation of environmental antibiotic contamination by surface wipe sampling in a large care centre.

OBJECTIVES: Exposure of healthcare workers to antibiotics may cause adverse health effects. Results of environmental contamination with antibiotics, obtained by taking surface wipe samples, can be used as an indicator for potential exposure to these sensitizing drugs. The objective was to describe the results of repeated measurements of contamination with antibiotics on multiple surfaces in hospital wards. Standardized needle and syringe preparation techniques and cleaning procedures were used. METHODS: The preparation table and the floor around the waste bin in six wards were sampled and analysed for contamination with the antibiotics amoxicillin, benzylpenicillin, cefotaxime, ceftriaxone, flucloxacillin, meropenem, piperacillin and vancomycin. Sampling was performed in four trials during 8 months. Depending on the outcome of the trials, the cleaning procedure was adapted. Liquid chromatography with tandem mass spectrometry was used for the analysis of the drugs. RESULTS: During the four trials, contamination with all eight antibiotics was omnipresent on all preparation tables and floors in the six wards. The highest contamination was found for amoxicillin (1291 ng/cm2). Changing the cleaning procedure did not reduce the level of contamination. CONCLUSIONS: Surface contamination with the antibiotics was widespread and most probably caused by spillage during the preparation in combination with an ineffective cleaning procedure. Strategies should be developed and implemented by institutions for safe handling of antibiotics to reduce environmental contamination and potential exposure of healthcare workers to these sensitizing drugs.

Thin seams and small mines are associated with higher exposures to respirable crystalline silica in US underground coal mines.

OBJECTIVES: Previous radiologic and histopathologic studies suggest respirable crystalline silica (RCS) overexposure has been driving the resurgence of pneumoconiosis among contemporary US coal miners, with a higher prevalence of severe disease in Central Appalachia. We sought to better understand RCS exposure among US underground coal miners. METHODS: We analysed RCS levels, as measured by respirable quartz, from coal mine dust compliance data from 1982 to 2021. RESULTS: We analysed 322 919 respirable quartz samples from 5064 US underground coal mines. Mean mine-level respirable quartz percentage and mass concentrations were consistently higher for Central Appalachian mines than the rest of the USA. Mean mine-level respirable quartz mass concentrations decreased significantly over time, from 0.116 mg/m3 in 1982 to as low as 0.017 mg/m3 for Central Appalachian mines, and from 0.089 mg/m3 in 1983 to 0.015 mg/m3 in 2020 for the rest of the USA. Smaller mine size, location in Central Appalachia, lack of mine safety committee and thinner coal seams were predictive of higher respirable quartz mass concentrations. CONCLUSIONS: These data substantially support the association between RCS overexposure and the resurgence of coal workers' pneumoconiosis in the USA, particularly in smaller mines in Central Appalachia.

Permeation of a firearm cleaning solvent through disposable nitrile gloves.

The objective was to study the interaction of the components of a complex liquid mixture on the permeation parameters of its constituents. A firearm cleaning solvent, Hoppes No. 9 Gun Bore Cleaner, was selected to challenge two varieties of disposable nitrile gloves, the thinnest (Kimberly-Clark Lavender) and thickest (Kimberly-Clark Blue), using the closed-loop ASTM F739 cell without recirculation and n-decane collection followed by quantitation of the permeated compounds using capillary gas chromatography-mass spectrometry. The thicker Blue glove resisted the permeation of Hoppe's relative to the thinner Lavender glove as shown by 3.2 times more mass permeated by the Lavender glove at 60 min despite the same standardized breakthrough times (7.5 ± 2.5 min). The kerosene fraction permeated faster at a much higher rate than expected. The Kimberly-Clark disposable nitrile glove chemical resistance guide lists a breakthrough time for kerosene of 82 min for Sterling disposable nitrile glove material. However, for Hoppe's the kerosene components appeared at the standardized breakthrough time. Mixture components that were reported by the glove manufacturer to quickly permeate the disposable nitrile material, such as ethanol, did not permeate at a rate slower than expected, indicative of a possible carrier function. A semiquantitative risk assessment confirmed the unacceptability of both gloves. Persons using personal protective equipment, such as gloves, may not be afforded the expected resistance to chemical permeation when chemicals are in a suitable mixture, hence enhancing the risk of exposure. More research is needed to produce better glove testing measures to ensure the safety of workers.

Review of environmental airborne pyrene/benzo[a]pyrene levels from industrial emissions for the improvement of 1-hydroxypyrene biomonitoring interpretation.

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous pollutants of significant public health concern, with several that are highly toxic to humans, including some proven or suspected carcinogens. To account for the high variability of PAH mixtures encountered in occupational settings, adjusting urinary 1-hydroxypyrene (1-OHP) levels by the total airborne pyrene (PyrT)/benzo[a]pyrene (BaP) ratio is essential for human biomonitoring (HBM). Given the complexity and cost of systematically monitoring atmospheric levels, alternative approaches to simultaneous airborne and HBM are required. The aim of this review was to catalog airborne PyrT/BaP ratios measured during different industrial activities and recommend 1-OHP-dedicated biological guidance values (BGV). A literature search was conducted. Seventy-one studies were included, with 5619 samples pertaining to 15 industrial sectors, 79 emission processes, and 213 occupational activities. This review summarized more than 40 years of data from almost 20 countries and highlighted the diversity and evolution of PAH emissions. PyrT/BaP ratios were highly variable, ranging from 0.8 in coke production to nearly 40 in tire and rubber production. A single PyrT/BaP value cannot apply to all occupational contexts, raising the question of the relevance of defining a single biological limit value for 1-OHP in industrial sectors where the PyrT/BaP ratio variability is high. Based upon the inventory, a practical approach is proposed for systematic PAH exposure and risk assessment, with a simple frame to follow based upon specific 1-OHP BGVs depending upon the occupational context and setup of a free PAH HBM interactive tool.

Ensuring radiation safety: Evaluating dose and compliance among medical staff at King Faisal Medical Complex, Saudi Arabia.

BACKGROUND: Radiation is an integral part of routine medical practice, but it carries a risk to the health of medical staff. Hence, it should be assessed periodically. The study's goal was to quantify the levels of radiation exposure for medical staff at King Faisal Medical Complex (KFMC), Taif City Saudi Arabia, and to assess their radiation protective procedures in practice. METHODS: The study looked at the thermoluminescence dosimeters (TLDs) records of 50 medical professionals who were exposed to radiation while working at KFMC from 2019 to 2020 in Taif city, Saudi Arabia. In Riyadh, radiation exposure is read from skin TLDs using Harshaw model 6600 plus detectors. The Excel software was utilized to process the obtained data for calculating effective doses. A questionnaire was also distributed to the medical staff to assess their radiation protection procedures. The Statistical Package for Social Sciences (SPSS) program version 23 was used to analyze the obtained data. RESULTS: The mean annual effective doses of the medical staff in 2019 and 2020 were determined to be 1.14 mSv and 1.4645 mSv, respectively, with no significant difference in effective doses between males and females in either year. The socio-demographic features of the medical personnel were examined, and the findings revealed that the majority of participants were male radiological technologists. The rate of adherence to radiation protection techniques was 68%, with a normally distributed dispersal. The amount of adherence varied significantly depending on nationality, occupation, and academic qualification. CONCLUSION: According to the research, the mean annual effective dosage for medical professionals at KFMC was significantly below the recommended level, indicating satisfactory compliance with the ALARA radiation safety concept.

Relationships between asbestos exposure and pleural plaques: dose and time effects using fractional polynomials.

OBJECTIVE: The aim of this study was to confirm the relationship between several parameters of exposure to asbestos and pleural plaques (PP) using data from a large cohort of retired workers occupationally exposed to asbestos in France. METHOD: A large screening programme, including high-resolution CT (HRCT) examinations at inclusion and two other HRCT campaigns, was organised from 2003 to 2016 in four regions of France for voluntary, formerly asbestos-exposed workers. Exposure to asbestos has been evaluated by industrial hygienists based on the complete work history. The time since first exposure, the time since last exposure, Cumulative Exposure Index and maximum level of exposure to asbestos, were used in logistic regression using fractional polynomials to model the relationship with PP. RESULTS: The study included 5392 subjects with at least one HRCT available. There was a significant non-linear effect of time since first exposure, time since last exposure and Cumulative Exposure Index to asbestos on the presence of PP. The risk of PP increased with increasing Cumulative Exposure Index to asbestos adjusted for time since first exposure, age and smoking status. Models also show that PP odds rise with increasing time since first exposure adjusted for cumulative index exposure, age and smoking status. PP odds decrease when time since last exposure increases. CONCLUSION: The study provides new data on the link between asbestos exposure and the presence of PP using fractional polynomials with non-linear relationships for time exposure parameters and asbestos exposure parameters.

Pesticide application behavior in green tea cultivation and risk assessment of tea products: a case study of Rizhao green tea.

Previous research on pesticides in green tea mainly focused on detection technology but lacked insights into pesticide use during cultivation. To address this gap, a survey was conducted among Rizhao green tea farmers. The survey results showed that most tea farmers were approximately 60 years old and managed small, scattered tea gardens (< 0.067 ha). Notably, tea farmers who had received agricultural training executed more standardized pesticide application practices. Matrine and thiazinone are the most used pesticides. A total of 16 types of pesticides were detected in the tested green tea samples, with 65% of the samples containing residues of at least one pesticide. Notably, higher levels of residues were observed for bifenthrin, cyfluthrin, and acetamiprid. The presence of pesticide residues varied significantly between seasons and regions. The risk assessment results indicated that the hazard quotient (HQ) values for all 16 pesticides detected in green tea were < 1, suggesting that these residue levels do not pose a significant public health concern.