RÉSUMÉ
The growing activity in the textile industry has been demanding the search for new and innovative technologies to meet consumers' needs regarding more sustainable and ecological processes, with functionality receiving more attention. Bee products are known for their wide spectra of properties, including antioxidant and antibacterial activities. Propolis and honey are the most popular and used since ancient times for the most diverse applications due to their health benefits. With the increasing need for safer and more sustainable practices, the use of natural products for the functional finishing process can be a suitable alternative due to their safety and eco-friendly nature. For that, a biosolution, composed of a mixture of propolis and honey in water, was used to perform the functional finishing of cotton knits, both in the presence and in the absence of potassium alum as a chemical mordant. The fastness strength was also evaluated after three washing cycles. The antioxidant potential of the biosolution, assessed with the in vitro ABTS scavenging assay, provided textiles with the capacity to reduce more than 90% of the ABTS radical, regardless of the mordant presence and even after three washing cycles. Furthermore, biofunctional textiles decreased the growth of Bacillus subtilis, Propionibacterium acnes, Escherichia coli, and, particularly, Staphylococcus aureus cultures after 24 h of incubation with an increase in antibacterial activity when potassium alum was used. These findings show that bee products are promising and effective alternatives to be used in the textile industry to confer antioxidant and antibacterial properties to cotton textiles, thereby enhancing human health.
Sujet(s)
Antibactériens , Antioxydants , Miel , Propolis , Propolis/composition chimique , Propolis/pharmacologie , Miel/analyse , Antioxydants/pharmacologie , Antioxydants/composition chimique , Antibactériens/pharmacologie , Antibactériens/composition chimique , Textiles , Fibre de coton/analyse , Staphylococcus aureus/effets des médicaments et des substances chimiques , Staphylococcus aureus/croissance et développement , Tests de sensibilité microbienne , Escherichia coli/effets des médicaments et des substances chimiques , Escherichia coli/croissance et développement , Alun/composition chimique , Bacillus subtilis/effets des médicaments et des substances chimiques , Bacillus subtilis/croissance et développementRÉSUMÉ
Cotton is used for the production of textiles, hygiene and cosmetic materials. During cultivation and technological processes, various types of substances (surfactants, softeners, lubricants, etc.) penetrate cotton, which can have a harmful effect on both the human body and the environment. The aim of this study was to analyze selected cotton products in order to identify the substances contained and to describe the potential possibilities of inducing textile contact dermatitis (CD). The impact of the identified compounds on the aquatic environment was also taken into account. Nine samples of cotton clothing and seven samples of cotton pads from various manufacturers were tested. Samples after extraction using the FUSLE (Focused Ultrasonic Liquid Extraction) technique were analyzed with GC/MS. Qualitative analysis was based on comparing mass spectra with library spectra using the following mass spectra deconvolution programs: MassHunter (Agilent), AMDIS (NIST), and PARADISE (University of Copenhagen). The parameter confirming the identification of the substance was the retention index. Through the non-target screening process, a total of 36 substances were identified, with an average AMDIS match factor of approximately 900 ("excellent match"). Analyzing the properties of the identified compounds, it can be concluded that most of them have potential properties that can cause CD, also due to the relatively high content in samples. This applies primarily to long-chain alkanes (C25-C31), saturated fatty acids, fatty alcohols (e.g., oleyl alcohol), and fatty acid amides (e.g., oleamide). However, there are not many reports describing cases of cotton CD. Information on the identified groups of compounds may be helpful in the case of unexplained sources of sensitization when the skin comes into contact with cotton materials. Some of the identified compounds are also classified as dangerous for aquatic organisms, especially if they can be released during laundering.
Sujet(s)
Fibre de coton , Chromatographie gazeuse-spectrométrie de masse , Chromatographie gazeuse-spectrométrie de masse/méthodes , Fibre de coton/analyse , Humains , Textiles/analyse , Eczéma de contact/étiologieRÉSUMÉ
In the industrial sector, vegetable residual materials have received attention in the production of bio-colorant for textile dyeing. The current research endeavor is centered on investigating the possibility of using sugar beet leaves as a natural source of dye for the purpose of dyeing cotton fabrics. Different extraction methods were utilized to isolate the bio-colorant present in sugar beet residual material, and the most favorable colorant yield was obtained using a 5% methanolic KOH solution. For optimal dyeing results, the cotton fabric performed dyeing for a duration of 45 min at a temperature of 60â °C, using a salt solution concentration of 6 g/100 mL and 50 mL of the extracted dye solution. Characterization of dye using Fourier transform infrared spectroscopy analysis confirmed the presence of quercetin in the leaf extract. For the creation of a range of color variations, mordants that were chemical in nature, such as tannic acid, iron sulfate, potassium dichromate, and copper sulfate, as well as mordants that were bio-based, such as onion peel, pomegranate peel, henna, golden shower bark, and turmeric, were employed in harmony. In comparison, the utilization of bio-mordants resulted in darker shades that exhibited enhanced color intensity and superior color fastness properties with the value of 4-5 for wash, 4 for wet rubbing, 4-5 for dry rubbing, and 4-5 for light. The findings of this study hold significant value in terms of ecofriendly waste management and contribute to advancements in the industrial sector by utilizing waste residual materials as a natural source of colorants.
Sujet(s)
Beta vulgaris , Agents colorants , Feuilles de plante , Beta vulgaris/composition chimique , Feuilles de plante/composition chimique , Agents colorants/composition chimique , Extraits de plantes/composition chimique , Spectroscopie infrarouge à transformée de Fourier , Fibre de coton/analyse , Couleur , Industrie textileRÉSUMÉ
BACKGROUND Foreign body aspiration (FBA) is a common and serious problem in childhood that requires early recognition and treatment. Common complications include asphyxia, hemorrhage, infection, and pneumothorax. In severe cases of foreign body obstruction, death can result from asphyxia. We report an interesting case in which a forgotten cotton ball was inhaled into the lungs. CASE REPORT A 5-year-old boy presented to the local hospital with coughing for 6 days and fever for 4 days, without any information of foreign body aspiration upon admission. Laboratory findings indicated an elevated white blood cell; therefore, cefprozil was given as anti-infective treatment. However, the child's condition did not improve. A computed tomography scan showed left pulmonary atelectasis. Considering that the child's condition was serious, he was referred to our hospital for diagnosis and treatment. After referral, auscultation revealed decreased breath sounds over the left lung. After multidisciplinary discussion, combined with the results of auxiliary examination, the possibility of a foreign body was considered. He underwent rigid bronchoscopy, which confirmed a yellow-white foreign body in the left main bronchus that was later verified as a cotton ball. The operation was very successful. Eventually, his condition improved and he was discharged, without additional complications. CONCLUSIONS For children with unclear history of foreign body aspiration, bronchoscopy is recommended if there is recurrent pulmonary infection, low auscultation breath sounds, or abnormal imaging. The choice of surgical method depends on the location and type of foreign body and the experience of the surgeon, which is also very important.
Sujet(s)
Bronchoscopie , Corps étrangers , Humains , Mâle , Enfant d'âge préscolaire , Corps étrangers/complications , Inhalation bronchique , Atélectasie pulmonaire/étiologie , Atélectasie pulmonaire/imagerie diagnostique , Fibre de coton , Tomodensitométrie , BronchesRÉSUMÉ
Plasmodesmata are transmembrane channels embedded within the cell wall that can facilitate the intercellular communication in plants. Plasmodesmata callose-binding (PDCB) protein that associates with the plasmodesmata contributes to cell wall extension. Given that the elongation of cotton fiber cells correlates with the dynamics of the cell wall, this protein can be related to the cotton fiber elongation. This study sought to identify PDCB family members within the Gossypium. hirsutum genome and to elucidate their expression profiles. A total of 45 distinct family members were observed through the identification and screening processes. The analysis of their physicochemical properties revealed the similarity in the amino acid composition and molecular weight across most members. The phylogenetic analysis facilitated the construction of an evolutionary tree, categorizing these members into five groups mainly distributed on 20 chromosomes. The fine mapping results facilitated a tissue-specific examination of group V, revealing that the expression level of GhPDCB9 peaked five days after flowering. The VIGS experiments resulted in a marked decrease in the gene expression level and a significant reduction in the mature fiber length, averaging a shortening of 1.43-4.77 mm. The results indicated that GhPDCB9 played a pivotal role in the cotton fiber development and served as a candidate for enhancing cotton yield.
Sujet(s)
Fibre de coton , Gossypium , Phylogenèse , Protéines végétales , Plasmodesmes , Gossypium/génétique , Gossypium/métabolisme , Plasmodesmes/métabolisme , Fibre de coton/analyse , Protéines végétales/génétique , Protéines végétales/métabolisme , Régulation de l'expression des gènes végétaux , Glucanes/métabolisme , Famille multigénique , Paroi cellulaire/métabolisme , Paroi cellulaire/génétique , Protéines de transport/génétique , Protéines de transport/métabolismeRÉSUMÉ
To determine the genes associated with the fiber strength trait in cotton, three different cotton cultivars were selected: Sea Island cotton (Xinhai 32, with hyper-long fibers labeled as HL), and upland cotton (17-24, with long fibers labeled as L, and 62-33, with short fibers labeled as S). These cultivars were chosen to assess fiber samples with varying qualities. RNA-seq technology was used to analyze the expression profiles of cotton fibers at the secondary cell wall (SCW) thickening stage (20, 25, and 30 days post-anthesis (DPA)). The results showed that a large number of differentially expressed genes (DEGs) were obtained from the three assessed cotton cultivars at different stages of SCW development. For instance, at 20 DPA, Sea Island cotton (HL) had 6,215 and 5,364 DEGs compared to upland cotton 17-24 (L) and 62-33 (S), respectively. Meanwhile, there were 1,236 DEGs between two upland cotton cultivars, 17-24 (L) and 62-33 (S). Gene Ontology (GO) term enrichment identified 42 functions, including 20 biological processes, 11 cellular components, and 11 molecular functions. Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis identified several pathways involved in SCW synthesis and thickening, such as glycolysis/gluconeogenesis, galactose metabolism, propanoate metabolism, biosynthesis of unsaturated fatty acids pathway, valine, leucine and isoleucine degradation, fatty acid elongation pathways, and plant hormone signal transduction. Through the identification of shared DEGs, 46 DEGs were found to exhibit considerable expressional differences at different fiber stages from the three cotton cultivars. These shared DEGs have functions including REDOX enzymes, binding proteins, hydrolases (such as GDSL thioesterase), transferases, metalloproteins (cytochromatin-like genes), kinases, carbohydrates, and transcription factors (MYB and WRKY). Therefore, RT-qPCR was performed to verify the expression levels of nine of the 46 identified DEGs, an approach which demonstrated the reliability of RNA-seq data. Our results provided valuable molecular resources for clarifying the cell biology of SCW biosynthesis during fiber development in cotton.
Sujet(s)
Paroi cellulaire , Fibre de coton , Régulation de l'expression des gènes végétaux , Gossypium , Gossypium/génétique , Gossypium/métabolisme , Gossypium/croissance et développement , Fibre de coton/analyse , Paroi cellulaire/métabolisme , Paroi cellulaire/génétique , Analyse de profil d'expression de gènes , TranscriptomeRÉSUMÉ
With the development of technology, people's demand for pressure sensors with high sensitivity and a wide working range is increasing. An effective way to achieve this goal is simulating human skin. Herein, we propose a facile, low-cost, and reproducible method for preparing a skin-like multi-layer flexible pressure sensor (MFPS) device with high sensitivity (5.51 kPa-1 from 0 to 30 kPa) and wide working pressure range (0-200 kPa) by assembling carbonized fabrics and micro-wrinkle-structured Ag@rGO electrodes layer by layer. In addition, the highly imitated skin structure also provides the device with an extremely short response time (60/90 ms) and stable durability (over 3000 cycles). Importantly, we integrated multiple sensor devices into gloves to monitor finger movements and behaviors. In summary, the skin-like MFPS device has significant potential for real-time monitoring of human activities in the field of flexible wearable electronics and human-machine interaction.
Sujet(s)
Fibre de coton , Pression , Dispositifs électroniques portables , Humains , Fibre de coton/analyse , Monitorage physiologique/instrumentation , Monitorage physiologique/méthodes , Techniques de biocapteur/instrumentation , Techniques de biocapteur/méthodes , Électrodes , Peau , Textiles , Activités humainesRÉSUMÉ
Cotton plays a crucial role in the progress of the textile industry and the betterment of human life by providing natural fibers. In our study, we explored the genetic determinants of cotton architecture and fiber yield and quality by crossbreeding Gossypium hirsutum and Gossypium barbadense, creating a recombinant inbred line (RIL) population. Utilizing SNP markers, we constructed an extensive genetic map encompassing 7,730 markers over 2,784.2 cM. We appraised two architectural and seven fiber traits within six environments, identifying 58 QTLs, of which 49 demonstrated stability across these environments. These encompassed QTLs for traits such as lint percentage (LP), boll weight (BW), fiber strength (STRENGTH), seed index (SI), and micronaire (MIC), primarily located on chromosomes chr-A07, chr-D06, and chr-D07. Notably, chr-D07 houses a QTL region affecting SI, corroborated by multiple studies. Within this region, the genes BZIP043 and SEP2 were identified as pivotal, with SEP2 particularly showing augmented expression in developing ovules. These discoveries contribute significantly to marker-assisted selection, potentially elevating both the yield and quality of cotton fiber production. These findings provide valuable insights into marker-assisted breeding strategies, offering crucial information to enhance fiber yield and quality in cotton production.
Sujet(s)
Cartographie chromosomique , Fibre de coton , Gossypium , Locus de caractère quantitatif , Gossypium/génétique , Locus de caractère quantitatif/génétique , Phénotype , Polymorphisme de nucléotide simple/génétique , Chromosomes de plante/génétique , Amélioration des plantes/méthodes , Marqueurs génétiquesRÉSUMÉ
The monotonicity of color type in naturally colored cottons (NCCs) has become the main limiting factor to their widespread use, simultaneously coexisting with poor fiber quality. The synchronous improvement of fiber quality and color become more urgent and crucial as the demand for sustainable development increases. The homologous gene of wild cotton Gossypium stocksii LAC15 in G. hirsutum, GhLAC15, was also dominantly expressed in the developing fibers of brown cotton XC20 from 5 DPA (day post anthesis) to 25 DPA, especially at the secondary cell wall thickening stage (20 DPA and 25 DPA). In XC20 plants with downregulated GhLAC15 (GhLAC15i), a remarkable reduction in proanthocyanidins (PAs) and lignin contents was observed. Some of the key genes in the phenylpropane and flavonoid biosynthesis pathway were down-regulated in GhLAC15i plants. Notably, the fiber length of GhLAC15i plants showed an obvious increase and the fiber color was lightened. Moreover, we found that the thickness of cotton fiber cell wall was decreased in GhLAC15i plants and the fiber surface became smoother compared to that of WT. Taken together, this study revealed that GhLAC15 played an important role in PAs and lignin biosynthesis in naturally colored cotton fibers. It might mediate fiber color and fiber quality by catalyzing PAs oxidation and lignin polymerization, ultimately regulating fiber colouration and development.
Sujet(s)
Fibre de coton , Régulation de l'expression des gènes végétaux , Gossypium , Laccase , Lignine , Protéines végétales , Paroi cellulaire/métabolisme , Couleur , Gossypium/génétique , Gossypium/métabolisme , Gossypium/enzymologie , Laccase/métabolisme , Laccase/génétique , Lignine/métabolisme , Protéines végétales/génétique , Protéines végétales/métabolisme , Proanthocyanidines/métabolismeRÉSUMÉ
Non-degradable plastic mulch films used in agriculture are polluting the environment by leaving residues and microplastics in the soil. They are also difficult to recycle due to contamination during their use. Biodegradable mulch films are needed as alternatives so that they can be used effectively during the growing season and later be ploughed to be degraded in soil. However, market-available so-called biodegradable mulch films are very slow to degrade in the natural environment and thus do not fit with crop rotation demands or annual cultivation. In this study, we have developed mulch films from cotton gin trash (CGT) and/or gin motes (GM) in combination with biodegradable polycaprolactone and demonstrated their effectiveness over 3 months in outdoor conditions. Both the stability and degradation behaviours of mulch film samples were observed when they were placed on top of the soil and buried in the soil, respectively. Pesticide residue analysis also was carried out on CGT powder to identify and quantify individual pesticides against a matrix of known pesticides. The mulch films prepared in this study showed comparable and stable mechanical properties compared to commercial biodegradable mulch film, though were much quicker to degrade when buried in the soil. No pesticides were detected in the CGT samples. The films produced were vapour-permeable and may be useful in practical agricultural settings by being able to maintain consistent soil moisture and allowing precipitation to penetrate gradually. The lab-scale production cost for the film was 98.8 AUD/kg, which could be lowered by integrating a continuous film line in large-scale production.
Sujet(s)
Résidus de pesticides , Polluants du sol , Résidus de pesticides/analyse , Polluants du sol/analyse , Agriculture/méthodes , Dépollution biologique de l'environnement , Gossypium , Fibre de coton/analyseRÉSUMÉ
Cotton has attracted considerable attention due to its functional characteristics. The focus of research on cotton has shifted in recent years towards designing multi-functional and modified media for cotton fibers, which can be firmly combined with textiles, giving them reusability and extending their service life. This study constructed a synergistic antibacterial layer of quaternary ammonium compounds (QACs) and N-halamine (Hals) using an in-situ free radical copolymerization method in water, named QACs/Hals@cotton-Cl. The route significantly increases the number of antibacterial active centers. FTIR, XPS, and SEM were used to systematically analyze the product's chemical structure, surface morphology, and other characteristics. The modified fabric's antibacterial efficiency, wound healing, renewability, and durability were also evaluated. The chlorinated modified cotton fabric could completely eradicate S. aureus and E. coli within 10 min. Compared with pure cotton, it notably promoted the healing rate of infected wounds in mice. The modification method imparted excellent hydrophobicity to the cotton fabric, with a contact angle exceeding 130°, making it easy to remove surface stains. After 30 days of regular storage and 24 h of UV irradiation, the active chlorine concentration (Cl+%) only decreased by 25 % and 39 %, respectively, and the reduced Cl+% was effectively recharged via simple re-chlorination. The hydrophobicity and antimicrobial properties of QACs/Hals@cotton-Cl remained stable even after 20 cycles of friction. This simple synthesis technique provides a convenient approach for the scalable fabrication of multifunctional and rechargeable antibacterial textiles, with potential applications in medical devices and personal hygiene protection.
Sujet(s)
Amines , Antibactériens , Fibre de coton , Escherichia coli , Staphylococcus aureus , Cicatrisation de plaie , Cicatrisation de plaie/effets des médicaments et des substances chimiques , Antibactériens/pharmacologie , Antibactériens/composition chimique , Animaux , Souris , Staphylococcus aureus/effets des médicaments et des substances chimiques , Amines/composition chimique , Escherichia coli/effets des médicaments et des substances chimiques , Composés d'ammonium quaternaire/composition chimique , Composés d'ammonium quaternaire/pharmacologie , Textiles , Tests de sensibilité microbienneRÉSUMÉ
Transformation of a fibrous mat into a three-dimensional (3D) scaffold opens up abundant innovative prospects in biomedical research, particularly for studying both soft as well as hard tissues. Electrospun nanofibers, which mimic the extracellular matrix have attracted significant attention in various studies. This research focuses on rapidly converting a fibrous mat made of polycaprolactone (PCL)/pluronic F-127 (PF-127) with different percentages of monetite calcium phosphate (MCP) into desirable 3D matrix cotton using a unique gas foaming technology. These matrix cottons possess biomimetic properties and have oriented porous structures. Using this innovative technique, various shapes of 3D matrix cotton, such as squares, hollow tubes, and other customizable forms, were successfully produced. Importantly, these 3D matrix cottons showed a consistent distribution of monetite particles with total porosity ranging from 90% to 98%. The structure of the 3D matrix cotton, its water/blood absorption capacity, the potential for causing non-hemolysis, and rapid hemostatic properties were thoroughly investigated. Additionally, periodontal cells were cultured on the 3D matrix cotton to assess their viability and morphology, revealing promising results. Furthermore, a coculture study involving NIH-3T3 and MG-63 cells on the 3D matrix cotton showed spheroidal formation within 24 h. Notably, in vitro assessments indicated that the matrix cotton containing 15% monetite (PCL-MMC15%) exhibited superior absorbent capabilities, excellent cell viability, and rapid hemostatic characteristics. Subsequently, the effectiveness of PCL-MMC15% in promoting mandibular bone regeneration was evaluated through an in vivo study on rabbits using a mandibular injury model. The results demonstrated that PCL-MMC15% facilitated the resolution of defects in the mandibular region by initiating new bone formation. Therefore, the presented 3D matrix cotton (PCL-MMC15%) shows significant promise for applications in both mandibular bone regeneration and hemostasis.
Sujet(s)
Matériaux biocompatibles , Régénération osseuse , Fibre de coton , Mandibule , Polyesters , Structures d'échafaudage tissulaires , Animaux , Souris , Régénération osseuse/effets des médicaments et des substances chimiques , Matériaux biocompatibles/composition chimique , Structures d'échafaudage tissulaires/composition chimique , Polyesters/composition chimique , Humains , Cellules NIH 3T3 , Phosphates de calcium/composition chimique , Lapins , Porosité , Hémostase/effets des médicaments et des substances chimiques , Hémostatiques/pharmacologie , Hémostatiques/usage thérapeutique , Hémostatiques/composition chimique , Nanofibres/composition chimiqueRÉSUMÉ
BACKGROUND: Medical dressings are designed to promote wound healing and reduce infection. The aim of project is to investigate the effect of natural brown colored cotton dressings on the healing of infected wounds in E.coli animals. MATERIALS AND METHODS: In this study, degreased white cotton gauze was used as the control group, with degreased brown cotton gauze and degreased bleached brown cotton gauze as the experimental group 1 and experimental group 2, to investigate the effect on the repair of post-infectious wound damage in animals by establishing an infected wound model in rats with E.coli as the infecting organism. RESULTS: The ability to promote healing of infected wounds was investigated by analyzing the wound healing status, macroscopic wound healing rate, hematoxylin-eosin staining, Masson staining, secretion of inflammatory factors by Elisa assay. The result showed that at day 14 of wound healing, the macroscopic wound healing rate was greater than 98% for all three groups of dressings; the collagen content reached 49.85 ± 5.84% in the experimental group 1 and 53.48 ± 5.32% in the experimental group 2, which was higher than the control group; brown cotton gauze promotes skin wound healing by shortening the inflammatory period in both groups. The expression of three inflammatory factors THF-α, IL-2, and IL-8 and three cytokines MMP-3, MMP-8, and MMP-9 were lower than that of the control group. CONCLUSIONS: It was found that natural brown cotton gauze has better repairing and promoting healing effect on infected wounds. It opens up the application of natural brown cotton gauze in the treatment of infected wounds.
Sujet(s)
Bandages , Fibre de coton , Cicatrisation de plaie , Infection de plaie , Animaux , Cicatrisation de plaie/physiologie , Rats , Infection de plaie/thérapie , Infection de plaie/anatomopathologie , Mâle , Rat Sprague-Dawley , Modèles animaux de maladie humaine , Escherichia coli , Peau/traumatismes , Peau/anatomopathologie , Collagène/métabolismeRÉSUMÉ
This study reports the findings from using time-domain nuclear magnetic resonance (TD-NMR) to analyze the pore structures of cotton fibers. Cotton fibers, which swell and soften in water, present challenges for conventional pore measurement techniques. TD-NMR overcomes these by measuring the transverse relaxation time (T2) of water protons within the fibers, indicative of internal pore sizes. We established a T2-to-pore size conversion equation using mixed cellulose ester membranes. This enabled differentiation between strongly bound, loosely bound, and free water within the fibers, and detailed the water distribution. A method for measuring the pore size distribution of wet cotton fiber was developed using TD-NMR. We then examined how various pretreatments affect the fibers' internal pores by comparing their pore size distribution and porosity. Specifically, caustic mercerization primarily enlarges the porosity and size of larger pores, while liquid ammonia treatment increases porosity but reduces the size of smaller pores. This research confirms TD-NMR's utility in assessing cotton fabrics' wet processing performance.
Sujet(s)
Fibre de coton , Spectroscopie par résonance magnétique , Fibre de coton/analyse , Porosité , Spectroscopie par résonance magnétique/méthodes , Eau/composition chimiqueRÉSUMÉ
Ecofriendly fabrics with antibacterial and anti-adhesion properties have been attracted an increasing attention in recent years. Herein, natural menthol modified polyacrylate (PMCA) antibacterial adhesion agent was synthesized by esterification and polymerisation while natural pterostilbene-grafted-chitosan (PGC) antibacterial agent was prepared through Mannich reaction. The antibacterial and anti-adhesion cotton fabric was fabricated through durable PMCA dip finishing and then layer-by-layer self-assembly of PGC. The results showed that the antibacterial adhesion rates and antibacterial rates of the dual-function cotton fabric against Staphylococcus aureus and Escherichia coli reached up to 99.9 %. Its antibacterial adhesion rates improved by 36.1 % and 40.1 % in comparison with those of cotton fabric treated by menthol alone. Meanwhile against S. aureus, the dual-function cotton fabrics improved the antibacterial rates by 56.7 % and 36.4 %, respectively, from those of chitosan- and pterostilbene-treated fabrics. Against E. coli, the improvements were 89.4 % and 24.8 %, respectively. After 20 household washings, the dual-function cotton fabric maintained >80 % of its original anti-adhesion and antibacterial rates against both species. The dual-function cotton fabric also possessed safe and excellent wearability.
Sujet(s)
Antibactériens , Chitosane , Fibre de coton , Escherichia coli , Staphylococcus aureus , Antibactériens/pharmacologie , Antibactériens/composition chimique , Escherichia coli/effets des médicaments et des substances chimiques , Staphylococcus aureus/effets des médicaments et des substances chimiques , Chitosane/composition chimique , Chitosane/pharmacologie , Adhérence bactérienne/effets des médicaments et des substances chimiques , Stilbènes/pharmacologie , Stilbènes/composition chimique , Textiles , Tests de sensibilité microbienne , Résines acryliques/composition chimiqueRÉSUMÉ
Uranium as a nuclear fuel, its source and aftertreatment has been a hot topic of debate for developers. In this paper, amidoxime and guanidino-modified cotton fibers (DC-AO-PHMG) were synthesized by the two-step functionalization approach, which exhibited remarkable antimicrobial and high uranium recovery property. Adsorption tests revealed that DC-AO-PHMG had excellent selectivity and anti-interference properties, the maximum adsorption capacity of 609.75 mg/g. More than 85 % adsorption capacity could still be kept after 10 adsorption-desorption cycles, and it conformed to the pseudo-second-order kinetic model and the Langmuir adsorption isotherm model as a spontaneous heat-absorbing chemical monolayer process. FT-IR, EDS and XPS analyses speculated that the amidoxime and amino synergistically increased the uranium uptake. The inhibitory activities of DC-AO-PHMG against three aquatic bacteria, BEY, BEL (from Yellow River water and lake bottom silt, respectively) and B. subtilis were significantly stronger, and the uranium adsorption was not impacted by the high bacteria content. Most importantly, DC-AO-PHMG removed up to 94 % of uranium in simulated seawater and extracted up to 4.65 mg/g of uranium from Salt Lake water, which demonstrated its great potential in the field of uranium resource recovery.
Sujet(s)
Fibre de coton , Oximes , Uranium , Uranium/composition chimique , Adsorption , Oximes/composition chimique , Eaux d'égout/composition chimique , Eaux d'égout/microbiologie , Cinétique , Antibactériens/pharmacologie , Antibactériens/composition chimique , Purification de l'eau/méthodesRÉSUMÉ
Cotton fabric has extensive application due to its comfort and breathability. However, the inherent flammability limits its wide application. Durable polysaccharide-based flame retardants with a low impact on the softness of fabrics are rarely reported. In this work, a novel flame retardant ammonium phosphate of lentinan (APLNT) was synthesized and grafted on the surface of cotton fabric. The treated cotton fabric had a high limiting oxygen index (LOI) value of 43.3 % and passed the vertical burning test (VBT) with a 21.1 % weight gain of APLNT. Compared with control cotton, the peak heat release rate and total heat release values of Cotton-APLNT2 decreased by 92.8 % and 50.9 %, respectively. In addition, the cotton fabric still passed the VBT and kept an LOI value of 27.0 % even after 50 laundering cycles, indicating that the fabric can be used for daily needs. More importantly, the treated fabric remains soft. This research provided a new strategy for preparing bio-based durable flame retardant cotton fabrics.
Sujet(s)
Fibre de coton , Ignifuges , Lentinane , Ignifuges/analyse , Fibre de coton/analyse , Lentinane/composition chimique , Textiles , Phosphates/composition chimiqueRÉSUMÉ
A unique combination of cotton fabric (CF) with a mixture of EDTA and APTES Fe3O4 magnetic particles was developed and utilized for the first time as an adsorbent for removing pollutants from wastewater. Initially, Fe3O4 was synthesized using the co-precipitation method. Further, the surface of Fe3O4 was modified by introducing amino functional groups through a reaction with APTES, resulting in Fe3O4-NH2. Following this, the surface of carbon fiber (CF) was altered using ethylenediaminetetraacetic acid (EDTA) to create CF@EDTA. Through the use of EDC-HCl and NHS, Fe3O4-NH2 was attached to the surface of CF@EDTA, resulting in the final product CF@EDTA/Fe3O4. Subsequently, the prepared CF@EDTA/Fe3O4 was utilized to adsorb metal pollutants from wastewater, with a thorough analysis conducted using various characterization techniques including FTIR, SEM, EDX, XRD, VSM, and XPS to study the materials. The study specifically aimed to assess the adsorption performance of our cotton-based material towards As(III) and Cr3+ metal ions. The pH study was also performed. Results indicated that the material exhibited an adsorption capacity of approximately 714 mg/g for As(III) ions and 708 mg/g for Cr3+ ions. The Langmuir and Freundlich models, as well as pseudo-first and second-order models were also analyzed. The Langmuir and pseudo-second-order models were found to best fit the data. In terms of regeneration and reusability, the materials showed straightforward regeneration and recyclability for up to 15 cycles. The remarkable adsorption capacity, combined with the unique blend of cotton and Fe3O4 magnet, along with its recyclability, positions our material CF@EDTA/Fe3O4 as a promising contender for wastewater treatment and other significant areas in water research.
Sujet(s)
Cellulose , Fibre de coton , Acide édétique , Eaux usées , Polluants chimiques de l'eau , Purification de l'eau , Eaux usées/composition chimique , Acide édétique/composition chimique , Polluants chimiques de l'eau/composition chimique , Polluants chimiques de l'eau/isolement et purification , Adsorption , Cellulose/composition chimique , Purification de l'eau/méthodes , Concentration en ions d'hydrogène , CinétiqueRÉSUMÉ
In order to fulfill the demands for degradability, a broad working range, and heightened sensitivity in flexible sensors, biodegradable polyurethane (BTPU) was synthesized and combined with CNTs to produce BTPU/CNTs coated cotton fabric using an ultrasonic-assisted inkjet printing process. The synthesized BTPU displayed a capacity for degradation in a phosphate buffered saline solution, resulting in a weight loss of 25 % after 12 weeks of degradation. The BTPU/CNTs coated cotton fabric sensor achieved an extensive strain sensing range of 0-137.5 %, characterized by high linearity and a notable sensitivity (gauge factor (GF) of 126.8). Notably, it demonstrated a low strain detection limit (1 %), rapid response (within 280 ms), and robust durability, enabling precise monitoring of both large and subtle human body movements such as finger, wrist, neck, and knee bending, as well as swallowing. Moreover, the BTPU/CNTs coated cotton fabric exhibited favorable biocompatibility with human epidermis, enabling potential applications as wearable skin-contact sensors. This work provides insight into the development of degradable and high sensing performance sensors suitable for applications in electronic skins and health monitoring devices.
Sujet(s)
Fibre de coton , Nanotubes de carbone , Polyesters , Polyuréthanes , Polyuréthanes/composition chimique , Fibre de coton/analyse , Humains , Polyesters/composition chimique , Nanotubes de carbone/composition chimique , Dispositifs électroniques portables , Impression (processus) , Textiles , Matériaux biocompatibles/composition chimiqueRÉSUMÉ
The thriving of wearable electronics and the emerging new requirements for electromagnetic interference (EMI) shielding have driven the innovation of EMI shielding materials towards lightweight, wearability and multifunctionality. Herein, the hierarchical polypyrrole nanotubes (PNTs)/PDMS structures are rationally constructed on the textile for obtaining multifunctional and flexible EMI shielding textiles by in-situ polymerization and surface coating. The modified cotton fabric possesses a conductivity of about 2715.8 S/m and an SET of 28.2 dB in the X band when the thickness is only 0.5 mm. After ultrasonic treatment, cyclic bending and washing, the conductivity and EMI shielding performance remain stable and exhibit long-term durability. Importantly, the textile's inherent lightweight, breathable and soft properties have been completely retained after modification. This work shows application potentiality in the field of EMI pollution protection and affords a novel path for the construction of multifunctionally wearable and durable EMI shielding materials.