Formic acid sandwich method is well-suited for filamentous fungi identification and improves turn around time using Zybio EXS2600 mass spectrometry.

OBJECTIVES: Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is extensively employed for the identification of filamentous fungi on MALDI Biotyper (Bruker Daltonics) and Vitek MS (biomerieux), but the performance of fungi identification on new EXS2600 (Zybio) is still unknow. Our study aims to evaluate the new EXS2600 system's (Zybio) ability to rapidly identify filamentous fungi and determine its effect on turnaround time (TAT) in our laboratory. METHODS: We tested 117 filamentous fungi using two pretreatment methods: the formic acid sandwich (FA-sandwich) and a commercial mold extraction kit (MEK, Zybio). All isolates were confirmed via sequence analysis. Laboratory data were extracted from our laboratory information system over two 9-month periods: pre-EXS (April to December 2022) and post-EXS (April to December 2023), respectively. RESULTS: The total correct identification (at the species, genus, or complex/group level) rate of fungi was high, FA-sandwich (95.73%, 112/117), followed by MEK (94.02%, 110/117). Excluding 6 isolates not in the database, species-level identification accuracy was 92.79% (103/111) for FA-sandwich and 91.89% (102/111) for MEK; genus-level accuracy was 97.29% (108/111) and 96.39% (107/111), respectively. Both methods attained a 100% correct identification rate for Aspergillus, Lichtheimia, Rhizopus Mucor and Talaromyces species, and were able to differentiate between Fusarium verticillioides and Fusarium proliferatum within the Fusarium fujikuroi species complex. Notably, high confidence was observed in the species-level identification of uncommon fungi such as Trichothecium roseum and Geotrichum candidum. The TAT for all positive cultures decreased from pre EXS2600 to post (108.379 VS 102.438, P < 0.05), and the TAT for tissue decreased most (451.538 VS 222.304, P < 0.001). CONCLUSIONS: The FA-sandwich method is more efficient and accurate for identifying filamentous fungi with EXS2600 than the MEK. Our study firstly evaluated the performance of fungi identification on EXS2600 and showed it is suitable for clinical microbiology laboratories use.

Redirecting electron flow in Acetobacterium woodii enables growth on CO and improves growth on formate.

Anaerobic, acetogenic bacteria are well known for their ability to convert various one-carbon compounds, promising feedstocks for a future, sustainable biotechnology, to products such as acetate and biofuels. The model acetogen Acetobacterium woodii can grow on CO2, formate or methanol, but not on carbon monoxide, an important industrial waste product. Since hydrogenases are targets of CO inhibition, here, we genetically delete the two [FeFe] hydrogenases HydA2 and HydBA in A. woodii. We show that the ∆hydBA/hydA2 mutant indeed grows on CO and produces acetate, but only after a long adaptation period. SNP analyzes of CO-adapted cells reveal a mutation in the HycB2 subunit of the HydA2/HydB2/HydB3/Fdh-containing hydrogen-dependent CO2 reductase (HDCR). We observe an increase in ferredoxin-dependent CO2 reduction and vice versa by the HDCR in the absence of the HydA2 module and speculate that this is caused by the mutation in HycB2. In addition, the CO-adapted ∆hydBA/hydA2 mutant growing on formate has a final biomass twice of that of the wild type.

Enzymes encapsulated in organic-inorganic hybrid nanoflower with spatial localization for sensitive and colorimetric detection of formate.

Formate is an important environmental pollutant, and meanwhile its concentration change is associated with a variety of diseases. Thus, rapid and sensitive detection of formate is critical for the biochemical analysis of complex samples and clinical diagnosis of multiple diseases. Herein, a colorimetric biosensor was constructed based on the cascade catalysis of formate oxidase (FOx) and horseradish peroxidase (HRP). These two enzymes were co-immobilized in Cu3(PO4)2-based hybrid nanoflower with spatial localization, in which FOx and HRP were located in the shell and core of nanoflower, respectively (FOx@HRP). In this system, FOx could catalyze the oxidation of formate to generate H2O2, which was then utilized by HRP to oxidize 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulphonic acid to yield blue product. Ideal linear correlation could be obtained between the absorbance at 420 nm and formate concentration. Meanwhile, FOx@HRP exhibited excellent detection performance with low limit of detection (6 µM), wide linear detection range (10-900 µM), and favorable specificity, stability and reusability. Moreover, it could be applied in the detection of formate in environmental, food and biological samples with high accuracy. Collectively, FOx@HRP provides a useful strategy for the simple and sensitive detection of formate and is potentially to be used in biochemical analysis and clinical diagnosis.

Simultaneous Formate and Syngas Conversion Boosts Growth and Product Formation by Clostridium ragsdalei.

Electrocatalytic CO2 reduction to CO and formate can be coupled to gas fermentation with anaerobic microorganisms. In combination with a competing hydrogen evolution reaction in the cathode in aqueous medium, the in situ, electrocatalytic produced syngas components can be converted by an acetogenic bacterium, such as Clostridium ragsdalei, into acetate, ethanol, and 2,3-butanediol. In order to study the simultaneous conversion of CO, CO2, and formate together with H2 with C. ragsdalei, fed-batch processes were conducted with continuous gassing using a fully controlled stirred tank bioreactor. Formate was added continuously, and various initial CO partial pressures (pCO0) were applied. C. ragsdalei utilized CO as the favored substrate for growth and product formation, but below a partial pressure of 30 mbar CO in the bioreactor, a simultaneous CO2/H2 conversion was observed. Formate supplementation enabled 20-50% higher growth rates independent of the partial pressure of CO and improved the acetate and 2,3-butanediol production. Finally, the reaction conditions were identified, allowing the parallel CO, CO2, formate, and H2 consumption with C. ragsdalei at a limiting CO partial pressure below 30 mbar, pH 5.5, n = 1200 min-1, and T = 32 °C. Thus, improved carbon and electron conversion is possible to establish efficient and sustainable processes with acetogenic bacteria, as shown in the example of C. ragsdalei.

Unlocking the formate utilization of wild-type Yarrowia lipolytica through adaptive laboratory evolution.

Synthetic biology is contributing to the advancement of the global net-negative carbon economy, with emphasis on formate as a member of the one-carbon substrate garnering substantial attention. In this study, we employed base editing tools to facilitate adaptive evolution, achieving a formate tolerance of Yarrowia lipolytica to 1 M within 2 months. This effort resulted in two mutant strains, designated as M25-70 and M25-14, both exhibiting significantly enhanced formate utilization capabilities. Transcriptomic analysis revealed the upregulation of nine endogenous genes encoding formate dehydrogenases when cultivated utilizing formate as the sole carbon source. Furthermore, we uncovered the pivotal role of the glyoxylate and threonine-based serine pathway in enhancing glycine supply to promote formate assimilation. The full potential of Y. lipolytica to tolerate and utilize formate establishing the foundation for pyruvate carboxylase-based carbon sequestration pathways. Importantly, this study highlights the existence of a natural formate metabolic pathway in Y. lipolytica.

Engineering yeasts to Co-utilize methanol or formate coupled with CO2 fixation.

The development of synthetic microorganisms that could use one-carbon compounds, such as carbon dioxide, methanol, or formate, has received considerable interest. In this study, we engineered Pichia pastoris and Saccharomyces cerevisiae to both synthetic methylotrophy and formatotrophy, enabling them to co-utilize methanol or formate with CO2 fixation through a synthetic C1-compound assimilation pathway (MFORG pathway). This pathway consisted of a methanol-formate oxidation module and the reductive glycine pathway. We first assembled the MFORG pathway in P. pastoris using endogenous enzymes, followed by blocking the native methanol assimilation pathway, modularly engineering genes of MFORG pathway, and compartmentalizing the methanol oxidation module. These modifications successfully enabled the methylotrophic yeast P. pastoris to utilize both methanol and formate. We then introduced the MFORG pathway from P. pastoris into the model yeast S. cerevisiae, establishing the synthetic methylotrophy and formatotrophy in this organism. The resulting strain could also successfully utilize both methanol and formate with consumption rates of 20 mg/L/h and 36.5 mg/L/h, respectively. The ability of the engineered P. pastoris and S. cerevisiae to co-assimilate CO2 with methanol or formate through the MFORG pathway was also confirmed by 13C-tracer analysis. Finally, production of 5-aminolevulinic acid and lactic acid by co-assimilating methanol and CO2 was demonstrated in the engineered P. pastoris and S. cerevisiae. This work indicates the potential of the MFORG pathway in developing different hosts to use various one-carbon compounds for chemical production.

A remarkable peroxidase-like behavior of the catalase KatA from the pathogenic bacteria Helicobacter pylori: The oxidation reaction with formate as substrate and the stabilization of an [Fe(IV) = O Trp•] intermediate assessed by multifrequency EPR spectroscopy.

We have characterized the catalytic cycle of the Helicobacter pylori KatA catalase (HPC). H. pylori is a human and animal pathogen responsible for gastrointestinal infections. Multifrequency (9-285 GHz) EPR spectroscopy was applied to identify the high-valent intermediates (5 ≤ pH ≤ 8.5). The broad (2000 G) 9-GHz EPR spectrum consistent with the [Fe(IV) = O Por•+] intermediate was detected, and showed a clear pH dependence on the exchange-coupling of the radical (delocalized over the porphyrin moiety) due to the magnetic interaction with the ferryl iron. In addition, Trp• (for pH ≤ 6) and Tyr• (for 5 ≤ pH ≤ 8.5) species were distinguished by the advantageous resolution of their g-values in the 285-GHz EPR spectrum. The unequivocal identification of the high-valent intermediates in HPC by their distinct EPR spectra allowed us to address their reactivity towards substrates. The stabilization of an [Fe(IV) = O Trp•] species in HPC, unprecedented in monofunctional catalases and possibly involved in the oxidation of formate to the formyloxyl radical at pH ≤ 6, is reminiscent of intermediates previously identified in the catalytic cycle of bifunctional catalase-peroxidases. The 2e- oxidation of formate by the [Fe(IV) = O Por•+] species, both at basic and acidic pH conditions, involving a 1H+/2e- oxidation in a cytochrome P450 peroxygenase-like reaction is proposed. Our findings demonstrate that moonlighting by the H. pylori catalase includes formate oxidation, an enzymatic reaction possibly related to the unique strategy of the neutrophile bacterium for gastric colonization, that is the release of CO2 to regulate the pH in the acidic environment.

Protocol to operate a large-scale CO2 hydrogenation process for formic acid production.

Formic acid is a viable product of CO2 utilization. Here, we present a protocol for designing and operating a pilot-scale formic acid production plant with a 10 kg/day capacity produced via CO2 hydrogenation. We describe the essential process specifications required for successful operation, including prevention of corrosion and formic acid decomposition. We then detail procedures for steady-state operation of the individual units. This protocol provides the necessary information for further scale-up and commercialization of the CO2 hydrogenation process. For complete details on the use and execution of this protocol, please refer to Kim et al.1.

Structural and biochemical characterization of the M405S variant of Desulfovibrio vulgaris formate dehydrogenase.

Molybdenum- or tungsten-dependent formate dehydrogenases have emerged as significant catalysts for the chemical reduction of CO2 to formate, with biotechnological applications envisaged in climate-change mitigation. The role of Met405 in the active site of Desulfovibrio vulgaris formate dehydrogenase AB (DvFdhAB) has remained elusive. However, its proximity to the metal site and the conformational change that it undergoes between the resting and active forms suggests a functional role. In this work, the M405S variant was engineered, which allowed the active-site geometry in the absence of methionine Sδ interactions with the metal site to be revealed and the role of Met405 in catalysis to be probed. This variant displayed reduced activity in both formate oxidation and CO2 reduction, together with an increased sensitivity to oxygen inactivation.

Systems metabolic engineering of Corynebacterium glutamicum to assimilate formic acid for biomass accumulation and succinic acid production.

Formate as an ideal mediator between the physicochemical and biological realms can be obtained from electrochemical reduction of CO2 and used to produce bio-chemicals. Yet, limitations arise when employing natural formate-utilizing microorganisms due to restricted product range and low biomass yield. This study presents a breakthrough: engineered Corynebacterium glutamicum strains (L2-L4) through modular engineering. L2 incorporates the formate-tetrahydrofolate cycle and reverse glycine cleavage pathway, L3 enhances NAD(P)H regeneration, and L4 reinforces metabolic flux. Metabolic modeling elucidates C1 assimilation, guiding strain optimization for co-fermentation of formate and glucose. Strain L4 achieves an OD600 of 0.5 and produces 0.6 g/L succinic acid. 13C-labeled formate confirms C1 assimilation, and further laboratory evolution yields 1.3 g/L succinic acid. This study showcases a successful model for biologically assimilating formate in C. glutamicum that could be applied in C1-based biotechnological production, ultimately forming a formate-based bioeconomy.

Evaluation of pretreatment methods for filamentous fungal detection.

In order to obtain the best mass spectrometry identification results for using the most appropriate methods in clinical practice, we explore the optimal pretreatment methods for different species and morphologies of filamentous fungi. 98 fungal strains were treated with formic acid sandwich method, dispersion method, extraction method, and other methods using a medium element mass spectrometer (EXS3000) as a platform. Each strain had three targets, and the identification rates and confidence differences under different pre-treatment methods were compared to evaluate the identification effects of these methods. The mass spectrometry identification rates of 98 filamentous fungi obtained after pre-treatment with formic acid sandwich method, dispersion method, and extraction method were 85.71%, 82.65%, and 75.51%, respectively. The identification rate of the formic acid sandwich method was significantly higher than the other two methods (P < 0 005) has the best identification ability and the obtained confidence is also higher than the other two methods. The use of formic acid sandwich method for mass spectrometry identification of filamentous fungi can achieve ideal identification results, which is suitable for mass spectrometry identification of filamentous fungi in conventional laboratories.

One-carbon unit supplementation fuels purine synthesis in tumor-infiltrating T cells and augments checkpoint blockade.

Nucleotides perform important metabolic functions, carrying energy and feeding nucleic acid synthesis. Here, we use isotope tracing-mass spectrometry to quantitate contributions to purine nucleotides from salvage versus de novo synthesis. We further explore the impact of augmenting a key precursor for purine synthesis, one-carbon (1C) units. We show that tumors and tumor-infiltrating T cells (relative to splenic or lymph node T cells) synthesize purines de novo. Shortage of 1C units for T cell purine synthesis is accordingly a potential bottleneck for anti-tumor immunity. Supplementing 1C units by infusing formate drives formate assimilation into purines in tumor-infiltrating T cells. Orally administered methanol functions as a formate pro-drug, with deuteration enabling kinetic control of formate production. Safe doses of methanol raise formate levels and augment anti-PD-1 checkpoint blockade in MC38 tumors, tripling durable regressions. Thus, 1C deficiency can gate antitumor immunity and this metabolic checkpoint can be overcome with pharmacological 1C supplementation.

Effects of summer treatments against Varroa destructor on viral load and colony performance of Apis mellifera colonies in Eastern Canada.

Despite the use of various integrated pest management strategies to control the honey bee mite, Varroa destructor, varroosis remains the most important threat to honey bee colony health in many countries. In Canada, ineffective varroa control is linked to high winter colony losses and new treatment options, such as a summer treatment, are greatly needed. In this study, a total of 135 colonies located in 6 apiaries were submitted to one of these 3 varroa treatment strategies: (i) an Apivar® fall treatment followed by an oxalic acid (OA) treatment by dripping method; (ii) same as in (i) with a summer treatment consisting of formic acid (Formic Pro™); and (iii) same as in (i) with a summer treatment consisting of slow-release OA/glycerin pads (total of 27 g of OA/colony). Treatment efficacy and their effects on colony performance, mortality, varroa population, and the abundance of 6 viruses (acute bee paralysis virus [ABPV], black queen cell virus [BQCV], deformed wing virus variant A [DWV-A], deformed wing virus variant B [DWV-B], Israeli acute paralysis virus [IAPV], and Kashmir bee virus [KBV]) were assessed. We show that a strategy with a Formic Pro summer treatment tended to reduce the varroa infestation rate to below the economic fall threshold of 15 daily varroa drop, which reduced colony mortality significantly but did not reduce the prevalence or viral load of the 6 tested viruses at the colony level. A strategy with glycerin/OA pads reduced hive weight gain and the varroa infestation rate, but not below the fall threshold. A high prevalence of DWV-B was measured in all groups, which could be related to colony mortality.

The formate-hydrogen axis and its impact on the physiology of enterobacterial fermentation.

Formic acid (HCOOH) and dihydrogen (H2) are characteristic products of enterobacterial mixed-acid fermentation, with H2 generation increasing in conjunction with a decrease in extracellular pH. Formate and acetyl-CoA are generated by radical-based and coenzyme A-dependent cleavage of pyruvate catalysed by pyruvate formate-lyase (PflB). Formate is also the source of H2, which is generated along with carbon dioxide through the action of the membrane-associated, cytoplasmically-oriented formate hydrogenlyase (FHL-1) complex. Synthesis of the FHL-1 complex is completely dependent on the cytoplasmic accumulation of formate. Consequently, formate determines its own disproportionation into H2 and CO2 by the FHL-1 complex. Cytoplasmic formate levels are controlled by FocA, a pentameric channel that translocates formic acid/formate bidirectionally between the cytoplasm and periplasm. Each protomer of FocA has a narrow hydrophobic pore through which neutral formic acid can pass. Two conserved amino acid residues, a histidine and a threonine, at the center of the pore control directionality of translocation. The histidine residue is essential for pH-dependent influx of formic acid. Studies with the formate analogue hypophosphite and amino acid variants of FocA suggest that the mechanisms of formic acid efflux and influx differ. Indeed, current data suggest, depending on extracellular formate levels, two separate uptake mechanisms exist, both likely contributing to maintain pH homeostasis. Bidirectional formate/formic acid translocation is dependent on PflB and influx requires an active FHL-1 complex. This review describes the coupling of formate and H2 production in enterobacteria.

Cycling back to folate metabolism in cancer.

Metabolic changes contribute to cancer initiation and progression through effects on cancer cells, the tumor microenvironment and whole-body metabolism. Alterations in serine metabolism and the control of one-carbon cycles have emerged as critical for the development of many tumor types. In this Review, we focus on the mitochondrial folate cycle. We discuss recent evidence that, in addition to supporting nucleotide synthesis, mitochondrial folate metabolism also contributes to metastasis through support of antioxidant defense, mitochondrial protein synthesis and the overflow of excess formate. These observations offer potential therapeutic opportunities, including the modulation of formate metabolism through dietary interventions and the use of circulating folate cycle metabolites as biomarkers for cancer detection.

Optical coherence tomography-guided Brillouin microscopy highlights regional tissue stiffness differences during anterior neural tube closure in the Mthfd1l murine mutant.

Neurulation is a highly synchronized biomechanical process leading to the formation of the brain and spinal cord, and its failure leads to neural tube defects (NTDs). Although we are rapidly learning the genetic mechanisms underlying NTDs, the biomechanical aspects are largely unknown. To understand the correlation between NTDs and tissue stiffness during neural tube closure (NTC), we imaged an NTD murine model using optical coherence tomography (OCT), Brillouin microscopy and confocal fluorescence microscopy. Here, we associate structural information from OCT with local stiffness from the Brillouin signal of embryos undergoing neurulation. The stiffness of neuroepithelial tissues in Mthfd1l null embryos was significantly lower than that of wild-type embryos. Additionally, exogenous formate supplementation improved tissue stiffness and gross embryonic morphology in nullizygous and heterozygous embryos. Our results demonstrate the significance of proper tissue stiffness in normal NTC and pave the way for future studies on the mechanobiology of normal and abnormal embryonic development.

Gray mesoporous SnO2 catalyst for CO2 electroreduction with high partial current density and formate selectivity.

The mesoporous metal oxide semiconductors exhibit unique chemical and physical characteristics, making them highly desirable for catalysis, electrochemistry, energy conversion, and energy storage applications. Here, we report the facial fabrication of mesoporous gray SnO2 (MGS) electrocatalysts employing an evaporation-induced co-assembly (EICA) approach, utilizing poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers Pluronic P123 (PEO-PPO-PEO) triblock copolymer as a template for electrochemical CO2 reduction reaction (eCO2RR). By sustaining the co-assembly conditions and utilizing a thermal treatment technique based on carbon, gray mesoporous SnO2 materials with a high density of active sites and oxygen vacancies can be constructed. The MGS materials were employed in eCO2RR in a flow cell type, which exhibits excellent catalytic activity and selectivity toward formate with a high partial current density of -234 mA cm-2 and Faradaic efficiency (FE) of 93.60 % at -1.3 V vs. reversible hydrogen electrode (RHE). Interestingly, the mesoporous SnO2 with a 1.5 wt% ratio of Sn precursor to P123 surfactant (MS-1.5@350N-400A) electrode exhibits a high level of Faradaic efficiency (FE) of (98%) at a low overpotential of -0.6 VRHE, which is a seldom recorded performance for similar systems. A stable FE of 96 ± 1% was observed in the range of -0.6 to -1.2 VRHE, which is the result of a large surface area (184 m2/g) and a high number of active sites and oxygen vacancies within the mesostructured framework.

[High performance liquid chromatography combined with the 2,2'-dithiodipyridine derivatization reaction for determination of different types of free thiols in human serum and analysis of their relationship with coronary heart disease].

Oxidative stress, which is characterized by an imbalance between antioxidants and free radicals, plays a pivotal role in the pathogenesis of coronary heart disease, a common and serious cardiovascular condition, and contributes significantly to its development and progression. Serum free thiols are crucial components of the body's antioxidant defense system. The accurate determination of serum free thiol levels provides a reference basis for understanding the body's status and monitoring the risk factors associated with the occurrence and progression of coronary heart disease. In this study, a high performance liquid chromatographic (HPLC) method based on the derivatization reaction of 2,2'-dithiodipyridine was developed to simultaneously obtain the concentrations of total free thiols (Total-SH), low-molecular-mass free thiols (LMM-SH), and protein-free thiols (P-SH) in human serum. An Agilent Eclipse XDB-C18 column (150 mm×4.6 mm, 5 µm) was used for the analysis, and gradient elution was performed at a flow rate of 1 mL/min. A 0.1% formic acid aqueous solution was used as mobile phase A, and a 0.1% formic acid acetonitrile solution was used as mobile phase B. The gradient elution program was as follows: 0-0.1 min, 12%B-30%B; 0.1-2 min, 30%B; 2-2.1 min, 30%B-100%B; 2.1-6 min, 100%B; 6-6.1 min, 100%B-12%B; 6.1-7 min, 12%B. Well-separated peaks appeared after a run time of 5 min. The peak of 2-thiopyridone represented the Total-SH content of the samples, and the peak of the pyridyldithio derivative represented the LMM-SH content. The difference between these two peaks indicated the P-SH content. The derivatization reaction conditions were optimized, and the method was validated. The method demonstrated good linearity, with a correlation coefficient ≥0.9994, over the concentration range of 31.25-1000 µmol/L. The limits of detection for Total-SH and LMM-SH were 2.61 and 0.50 µmol/L, and the limits of quantification for Total-SH and LMM-SH were 8.71 and 1.67 µmol/L, respectively. The recoveries of Total-SH and LMM-SH were in the range of 91.1%-106.0%. The intra- and inter-day precisions ranged from 0.4% to 9.1%. The developed method was used to analyze serum samples from 714 volunteers. The Total-SH concentrations ranged from 376.60 to 781.12 µmol/L, with an average concentration of 555.62 µmol/L. The LMM-SH concentrations varied from 36.37 to 231.65 µmol/L,with an average of 82.34 µmol/L. The P-SH concentrations ranged from 288.36 to 687.74 µmol/L, with an average of 473.27 µmol/L. Spearman's correlation test showed that serum thiol levels were correlated with the severity of coronary artery disease and common clinical biochemical indicators. The proposed study provides a simple and reliable HPLC method for detecting serum free thiols and exploring their relationship with coronary heart disease, offering a new reference for the study of markers related to the risk of coronary heart disease.

[Relationship between short-chain fatty acids in the gingival crevicular fluid and periodontitis of stage â ¢ or â £].

OBJECTIVE: To analyze the concentration of formic acid, propionic acid and butyric acid in gingival crevicular fluid (GCF) of patients with stages Ⅲ and Ⅳ periodontitis, and their relationship with periodontitis. METHODS: The study enrolled 37 systemically healthy patients with periodontitis and 19 healthy controls who visited Department of Periodontology, Peking University School and Hospital of Stomatology from February 2008 to May 2011. Their GCFs were collected from the mesial-buccal site of one molar or incisor in each quadrant. Periodontal clinical parameters, including plaque index(PLI), probing depth(PD), bleeding index(BI), and attachment loss(AL). Concentrations of formic acid, propionic acid and butyric acid in the supernatant of the GCFs were analyzed by high-performance capillary electrophoresis (HPCE). The prediction ability of formic acid, propionic acid and butyric acid with the risk of periodontitis and the differences between grade B and grade C periodontitis were analyzed. RESULTS: In this study, 32 patients with stage Ⅲ and 5 patients with stage Ⅳ were enrolled, including 9 patients with grade B and 28 patients with grade C. Clinical periodontal variables in the patients with periodontitis were significantly higher than those in the control group (P<0.001). Formic acid was significantly lower in periodontitis than that in the control group [5.37 (3.39, 8.49) mmol/L vs. 12.29 (8.35, 16.57) mmol/L, P<0.001]. Propionic acid and butyric acid in periodontitis were significantly higher than those in the control group: Propionic acid, 10.23 (4.28, 14.90) mmol/L vs. 2.71 (0.00, 4.25) mmol/L, P < 0.001; butyric acid, 2.63 (0.47, 3.81) mmol/L vs. 0.00 (0.00, 0.24) mmol/L, P<0.001. There was no significant difference in formic acid, propionic acid and butyric acid concentrations between grade B and grade C periodontitis (P>0.05). Propionic acid and butyric acid in the deep pocket were significantly higher than in the shallow pocket, while the concentration of formic acid decreased with the increase of PD. Propionic acid (OR=1.51, 95%CI: 1.29-1.75) and butyric acid (OR=3.72, 95%CI: 1.93-7.17) were risk factors for periodontitis, while formic acid (OR=0.87, 95%CI: 0.81-0.93) might be a protective factor for periodontitis. Propionic acid (AUC=0.852, 95%CI: 0.805－0.900), butyric acid (AUC=0.889, 95%CI: 0.841－0.937), f (formic acid, AUC=0.844, 95%CI: 0.793－0.895) demonstrated a good predictive capacity for the risk of periodontitis. CONCLUSION: The concentration of formic acid decrease in the GCF of periodontitis patients, which is a protective factor for periodontitis, its reciprocal have good predictive capacity. However, propionic acid and butyric acid increase, which are risk factors for periodontitis and have good predictive capacity. The concentration of formic acid, propionic acid, and butyric acid vary with probing depth, but there is no significant difference between grade B and grade C periodontitis.

Deep eutectic solvent pretreatment of cork dust - Effects on biomass composition, phenolic extraction and anaerobic degradability.

In this study, phenolic compounds using deep eutectic solvents (DES) were extracted from cork dust, and the biogas production potential of DES-treated cork dust samples was determined. The DES treatment was carried out using choline chloride and formic acid (1:2 M ratio) at various temperatures (90, 110 and 130 °C) and treatment times (20, 40 and 60 min) at a solid-to-solvent ratio of 1:10 g mL-1. The highest total phenolic content (137 mg gallic acid equivalent (GAE) g-1 dry cork dust) was achieved at 110 °C/20 min. The extracts exhibited an antioxidant capacity of up to 56.3 ± 3.1 % 1,1-diphenyl-2-picrylhydazyl (DPPH) inhibition at a dilution rate of 100. DES treatment resulted in minimal sugar solubilization at low temperatures, while approximately 42 % of the xylan fraction in the biomass degraded under severe conditions (e.g., 130 °C/60 min). Catechin, 4-hydroxybenzoic acid and gallic acid were the major phenolics in DES extracts. The biogas yield of DES-treated cork dust increased with treatment severity. The highest biogas yield (115.1mLN gVS-1) was observed at 130 °C/60 min, representing an increase of 125 % compared to the untreated sample. SEM images revealed that the surface structure of the samples became smoother after mild pretreatment and rougher after harsh pretreatment. Compositional and FTIR analyses indicated that a higher biogas formation potential was associated with increased cellulose content in the substrate, which could be attributed to hemicellulose solubilization in the hydrolysate. Overall, DES pretreatment effectively enhanced phenol extraction and anaerobic degradability.