Evaluation of a New DNA Extraction Method on Challenging Bone Samples Recovered from a WWII Mass Grave.

Bones and teeth represent a common finding in ancient DNA studies and in forensic casework, even after a long burial. Genetic typing is the gold standard for the personal identification of skeletal remains, but there are two main factors involved in the successful DNA typing of such samples: (1) the set-up of an efficient DNA extraction method; (2) the identification of the most suitable skeletal element for the downstream genetic analyses. In this paper, a protocol based on the processing of 0.5 g of bone powder decalcified using Na2EDTA proved to be suitable for a semi-automated DNA extraction workflow using the Maxwell® FSC DNA IQ™ Casework Kit (Promega, Madison, WI, USA). The performance of this method in terms of DNA recovery and quality was compared with a full demineralisation extraction protocol based on Qiagen technology and kits. No statistically significant differences were scored according to the DNA recovery and DNA degradation index (p-values ≥ 0.176; r ≥ 0.907). This new DNA extraction protocol was applied to 88 bone samples (41 femurs, 19 petrous bones, 12 metacarpals and 16 molars) allegedly belonging to 27 World War II Italian soldiers found in a mass grave on the isle of Cres (Croatia). The results of the qPCR performed by the Quantifiler Human DNA Quantification kit showed values above the lowest Limit of Quantification (lLOQ; 23 pg/µL) for all petrous bones, whereas other bone types showed, in most cases, lower amounts of DNA. Replicate STR-CE analyses showed successful typing (that is, >12 markers) in all tests on the petrous bones, followed by the metacarpals (83.3%), femurs (52.2%) and teeth (20.0%). Full profiles (22/22 autosomal markers) were achieved mainly in the petrous bones (84.2%), followed by the metacarpals (41.7%). Stochastic amplification artefacts such as drop-outs or drop-ins occurred with a frequency of 1.9% in the petrous bones, whereas they were higher when the DNA recovered from other bone elements was amplified (up to 13.9% in the femurs). Overall, the results of this study confirm that petrous bone outperforms other bone elements in terms of the quantity and quality of the recovered DNA; for this reason, if available, it should always be preferred for genetic testing. In addition, our results highlight the need for accurate planning of the DVI operation, which should be carried out by a multi-disciplinary team, and the tricky issue of identifying other suitable skeletal elements for genetic testing. Overall, the results presented in this paper support the need to adopt preanalytical strategies positively related to the successful genetic testing of aged skeletal remains in order to reduce costs and the time of analysis.

The Usefulness of qPCR Data for Sample Pre-Assessment and Interpretation of Genetic Typing Results.

DNA quantification is a crucial step in the STR typing workflow for human identification purposes. Given the reaction's nature, qPCR assays may be subjected to the same stochastic effects of traditional PCR for low-input concentrations. The study aims to evaluate the precision of the PowerQuant® (Promega) kit assay measurements and the degree of variability for DNA templates falling below the optimal threshold of the PowerPlex® ESX-17 Fast STR typing kit (Promega). Five three-fold dilutions of the 2800 M control DNA (Promega) were set up. Each dilution (concentrations: 0.05, 0.0167, 0.0055, 0.00185, and 0.000617 ng/µL) was quantified and amplified in four replicates. Variability for qPCR results, STR profile completeness, and EPGs' peak height were evaluated. The qPCR-estimated concentration of casework samples was correlated with profile completeness and peak intensity, to assess the predictive value of qPCR results for the successful STR typing of scarce samples. qPCR was subjected to stochastic effects, of which the degree was inversely proportional to the initial input template. Quantitation results and the STR profile's characteristics were strongly correlated. Due to the intrinsic nature of real casework samples, a qPCR-derived DNA concentration threshold for correctly identifying probative STR profiles may be difficult to establish. Quantitation data may be useful in interpreting and corroborating STR typing results and for clearly illustrating them to the stakeholders.

Looking into the Quantification of Forensic Samples with Real-Time PCR.

The quantification of human DNA extracts from forensic samples plays a key role in the forensic genetics process, ensuring maximum efficiency and avoiding repeated analyses, over-amplified samples, or unnecessary examinations. In our laboratory, we use the Quantifiler® Trio system to quantify DNA extracts from a wide range of samples extracted from traces (bloodstains, saliva, semen, tissues, etc.), including swabs from touched objects, which are very numerous in the forensic context. This method has been extensively used continuously for nine years, following an initial validation process, and is part of the ISO/IEC 17025 accredited method. In routine practice, based on the quantitative values determined from the extracts of each trace, we use a standard method or a low-copy-number method that involves repeating the amplification with the generation of a consensus genetic profile. Nowadays, when the quantification results are less than 0.003 ng/µL in the minimum extraction volume (40 µL), we do not proceed with the DNA extract analysis. By verifying the limits of the method, we make a conscious cost-benefit choice, in particular by using the least amount of DNA needed to obtain sufficiently robust genetic profiles appropriate for submission to the Italian DNA Forensic Database. In this work, we present a critical re-evaluation of this phase of the method, which is based on the use of standard curves obtained from the average values of the control DNA analysed in duplicate. Considering the various contributions to uncertainty that are difficult to measure, such as manual pipetting or analytical phases carried out by different operators, we have decided to thoroughly investigate the contribution of variability in the preparation of calibration curves to the final results. Thus, 757 samples from 20 independent experiments were re-evaluated using two different standards for the construction of curves, determining the quantitative differences between the two methods. The experiments also determined the parameters of the slope, Y-intercept, R2, and the values of the synthetic control probe to verify how these parameters can provide information on the final outcome of each analysis. The outcome of this revalidation demonstrated that it is preferable to use quantification ranges rather than exact quantitative limits before deciding how to analyse the extracts via PCR or forgoing the determination of profiles. Additionally, we present some preliminary data related to the analysis of samples that would not have been analysed based on the initial validation, from which genetic profiles were obtained after applying a concentration method to the extracts. Our goal is to improve the accredited analytical method, with a careful risk assessment as indicated by accreditation standards, ensuring that no source of evidence is lost in the reconstruction of a criminal event.

An Assessment of the Performance Limitations of the Integrated QuantifilerTM Trio-HRM Assay: A Forensic Tool Designed to Identify Mixtures at the Quantification Stage.

Although guidelines exist for identifying mixtures, these measures often occur at the end-point of analysis and are protracted. To facilitate early mixture detection, we integrated a high-resolution melt (HRM) mixture screening assay into the qPCR step of the forensic workflow, producing the integrated QuantifilerTM Trio-HRM assay. The assay, when coupled with a prediction tool, allowed for 75.0% accurate identification of the contributor status of a sample (single source vs. mixture). To elucidate the limitations of the developed qPCR-HRM assay, developmental validation studies were conducted assessing the reproducibility and samples with varying DNA ratios, contributors, and quality. From this work, it was determined that the integrated QuantifilerTM Trio-HRM assay is capable of accurately identifying mixtures with up to five contributors and mixtures at ratios up to 1:100. Further, the optimal performance concentration range was found to be between 0.025 and 0.5 ng/µL. With these results, evidentiary-like DNA samples were then analyzed, resulting in 100.0% of the mixture samples being accurately identified; furthermore, every time a sample was predicted as a single source, it was true, giving confidence to any single-source calls. Overall, the integrated QuantifilerTM Trio-HRM assay has exhibited an enhanced ability to discern mixture samples from single-source samples at the qPCR stage under commonly observed conditions regardless of the contributor's sex.

Identification of the body fluid donor in mixtures through target mRNA cSNP sequencing.

In forensic practice, mixture stains containing various body fluids are common, presenting challenges for interpretation, particularly in multi-contributor mixtures. Traditional STR profiles face difficulties in such scenarios. Over recent years, RNA has emerged as a promising biomarker for body fluid identification, and mRNA polymorphism has shown excellent performance in identifying body fluid donors in previous studies. In this study, a massively parallel sequencing assay was developed, encompassing 202 coding region SNPs (cSNPs) from 45 body fluid/tissue-specific genes to identify both body fluid/tissue origin and the respective donors, including blood, saliva, semen, vaginal secretion, menstrual blood, and skin. The specificity was evaluated by examining the single-source body fluids/tissue and revealed that the same body fluid exhibited similar expression profiles and the tissue origin could be identified. For laboratory-generated mixtures containing 2-6 different components and mock case mixtures, the donor of each component could be successfully identified, except for the skin donor. The discriminatory power for all body fluids ranged from 0.997176329 (menstrual blood) to 0.99999999827 (blood). The concordance of DNA typing and mRNA typing for the cSNPs in this system was also validated. This cSNP typing system exhibits excellent performance in mixture deconvolution.

Extending the discussion on inconsistency in forensic decisions and results.

The subject of inter- and intra-laboratory inconsistency was recently raised in a commentary by Itiel Dror. We re-visit an inter-laboratory trial, with which some of the authors of this current discussion were associated, to diagnose the causes of any differences in the likelihood ratios (LRs) assigned using probabilistic genotyping software. Some of the variation was due to different decisions that would be made on a case-by-case basis, some due to laboratory policy and would hence differ between laboratories, and the final and smallest part was the run-to-run difference caused by the Monte Carlo aspect of the software used. However, the net variation in LRs was considerable. We believe that most laboratories will self-diagnose the cause of their difference from the majority answer and in some, but not all instances will take corrective action. An inter-laboratory exercise consisting of raw data files for relatively straightforward mixtures, such as two mixtures of three or four persons, would allow laboratories to calibrate their procedures and findings.

Dense single nucleotide polymorphism testing revolutionizes scope and degree of certainty for source attribution in forensic investigations.

The field of forensic DNA analysis has experienced significant advancements over the years, such as the advent of DNA fingerprinting, the introduction of the polymerase chain reaction for increased sensitivity, the shift to a primary genetic marker system based on short tandem repeats, and implementation of national DNA databases. Now, the forensics field is poised for another revolution with the advent of dense single nucleotide polymorphisms (SNPs) testing. SNP testing holds the potential to significantly enhance source attribution in forensic cases, particularly those involving low-quantity or low-quality samples. When coupled with genetic genealogy and kinship analysis, it can resolve countless active cases as well as cold cases and cases of unidentified human remains, which are hindered by the limitations of existing forensic capabilities that fail to generate viable investigative leads with DNA. The field of forensic genetic genealogy combined with genome-wide sequencing can associate relatives as distant as the seventh-degree and beyond. By leveraging volunteer-populated databases to locate near and distant relatives, genetic genealogy can effectively narrow the candidates linked to crime scene evidence or aid in determining the identity of human remains. With decreasing DNA sequencing costs and improving sensitivity of detection, forensic genetic genealogy is expanding its capabilities to generate investigative leads from a wide range of biological evidence.

MHBase: A comprehensive database of short microhaplotypes for advancing forensic genetic analysis.

Microhaplotypes (MHs) were first recommended by Prof. Kidd for use in forensics because they can improve human identification, kinship analysis, mixture deconvolution, and ancestry prediction. Since their introduction, extensive research has demonstrated the advantages of MHs in forensic applications and provided useful data for different populations. Currently, two databases, ALFRED (ALlele FREquency Database) and MicroHapDB (MicroHaplotype DataBase), house the published MH information and population data. We previously constructed a single nucleotide polymorphism SNP-SNP MH database (D-SNPsDB) of MHs within 50 bp on the whole human genome for 26 populations integrating basic data such as physical genome positions, mapping of variant identifiers (rsIDs), allele frequencies, and basic variant information. Building upon the previous research, we further selected MHs containing at least two variants (SNPs and/or insertions/deletions [InDels]) within a short DNA fragment (≤ 50 bp) in 26 populations based on the 1000 Genomes Project dataset (Phase 3) to construct a more comprehensive database. Subsequently, we established a user-friendly website that allows users to search the MH database (MHBase) based on their research objectives and study population to find suitable loci and provides other functions such as querying reported loci, performing online calculations using the PHASE software, and calculating ancestral-related parameters. The loci in the database are classified as SNP-based MHs, which include only SNPs, and InDel-including MHs, which contain at least one InDel. Here, we provide a detailed overview of the MHBase and an analysis of shared loci at the global and continental levels, ancestral markers, the genetic distance within loci, and mapping with the genome annotation file. The website is an accessible and useful tool for researchers engaged in marker discovery, population studies, assay development, and panel design.

Development of a two-layer machine learning model for the forensic application of legal and illegal poppy classification based on sequence data.

Poppies are beneficial plants with a variety of applications, including medicinal, edible, ornamental, and industrial purposes. Some Papaver species are forensically significant plants because they contain opium, a narcotic substance. Internationally trafficked species of illegal poppies are being identified by DNA barcoding employing multiple markers in response to their forensic value. However, effective markers for precise species identification of legal and illegal poppies are still under discussion, with research on illegal poppies focusing on Papaver somniferum L., and species identification studies of Papaver bracteatum and Papaver setigerum DC. still lacking. As a result, in order to evaluate the performance of genetic markers and classify their DNA sequences in the genus Papaver, this study developed the first machine learning-based two-layer model, in which the first layer classifies legal and illegal poppies from the given sequence and the second layer identifies species of illegal poppies using their sequences. We constructed the dataset and investigated biological features from four markers, internal transcribed spacer 1 (ITS1), internal transcribed spacer 2 (ITS2), transfer RNA Leucine (trnL), transfer RNA Leucine - transfer RNA Phenylalanine intergenic spacer (trnL-trnF intergenic spacer) and their combination, using four machine learning algorithms, K-nearest neighbor (KNN), Naïve Bayes (NB), extreme gradient boost (XGBoost) and Random Forest (RF). According to our findings, for Layer 1 to classify legal and illegal poppies, KNN-based models using combined ITS region achieved the greatest performance of accuracy 0.846 and 0.889 using training and test sets, respectively. Additionally, for Layer 2 to identify illegal poppy species, KNN-based models using combined ITS region achieved the best performance of 0.833 and 1.000 for using training and test sets, respectively. To validate the model, the combined ITS region, which includes ITS 1 and 2 sequences, from blind poppy samples were used as a case study, with the Layer 1 correctly classifying legal and illegal poppies with over 0.830 accuracy. Layer 2 correctly identified P. setigerum DC., however, only one of the three P. somniferum L. species was accurately identified. Nevertheless, our research shows that machine learning can be used to classify and identify legal and illegal poppy species using DNA barcodes which can then be used as an efficient and effective forensic tool for improved law enforcement and a safer society.

Male-specific age prediction based on Y-chromosome DNA methylation with blood using pyrosequencing.

Age prediction is an important aspect of forensic science that offers valuable insight into identification. In recent years, extensive studies have been conducted on age prediction based on DNA methylation, and numerous studies have demonstrated that DNA methylation is a reliable biomarker for age prediction. However, almost all studies on age prediction based on DNA methylation have focused on age-related CpG sites in autosomes, which are concentrated on single-source DNA samples. Mixed samples, especially male-female mixed samples, are common in forensic casework. The application of Y-STRs and Y-SNPs can provide clues for the genetic typing of male individuals in male-female mixtures, but they cannot provide the age information of male individuals. Studies on Y-chromosome DNA methylation can address this issue. In this study, we identified five age-related CpG sites on the Y chromosome (Y-CpGs) and developed a male-specific age prediction model using pyrosequencing combined with a support vector machine algorithm. The mean absolute deviation of the model was 5.50 years in the training set and 6.74 years in the testing set. When we used a male blood sample to predict age, the deviation between the predicted and chronological age was 1.18 years. Then, we mixed the genomic DNA of the male and a female at ratios of 1:1, 1:5, 1:10, and 1:50, the range of deviation between the predicted and chronological age of the male in the mixture was 1.16-1.74 years. In addition, there was no significant difference between the methylation values of bloodstains and blood in the same sample, which indicates that our model is also suitable for bloodstain samples. Overall, our results show that age prediction using DNA methylation of the Y chromosome has potential applications in forensic science and can be of great help in predicting the age of males in male-female mixtures. Furthermore, this work lays the foundation for future research on age-related applications of Y-CpGs.

Uncovering Forensic Evidence: A Path to Age Estimation through DNA Methylation.

Age estimation is a critical aspect of reconstructing a biological profile in forensic sciences. Diverse biochemical processes have been studied in their correlation with age, and the results have driven DNA methylation to the forefront as a promising biomarker. DNA methylation, an epigenetic modification, has been extensively studied in recent years for developing age estimation models in criminalistics and forensic anthropology. Epigenetic clocks, which analyze DNA sites undergoing hypermethylation or hypomethylation as individuals age, have paved the way for improved prediction models. A wide range of biomarkers and methods for DNA methylation analysis have been proposed, achieving different accuracies across samples and cell types. This review extensively explores literature from the past 5 years, showing scientific efforts toward the ultimate goal: applying age prediction models to assist in human identification.

Assessing DNA Degradation through Differential Amplification Efficiency of Total Human and Human Male DNA in a Forensic qPCR Assay.

The assessment of degradation is crucial for the analysis of human DNA samples isolated from forensic specimens. Forensic quantitative PCR (qPCR) assays can include multiple targets of varying amplicon size that display differential amplification efficiency, and thus different concentrations, in the presence of degradation. The possibility of deriving information on DNA degradation was evaluated in a forensic qPCR assay not specifically designed to detect DNA fragmentation, the Plexor HY (Promega), by calculating the ratio between the estimated concentrations of autosomal (99 bp) and Y-chromosomal (133 bp) targets ("[Auto]/[Y]"). The [Auto]/[Y] ratio measured in 57 formalin-fixed, paraffin-embedded samples was compared to a quality score (QS) calculated for corresponding STR profiles using quantitative data (allele peak height). A statistically significant inverse correlation was observed between [Auto]/[Y] and QS (R = -0.65, p < 0.001). The [Auto]/[Y] values were highly correlated (R = 0.75, p < 0.001) with the "[Auto]/[D]" values obtained using the PowerQuant (Promega) assay, expressly designed to detect DNA degradation through simultaneous quantification of a short (Auto) and a long (D) autosomal target. These results indicate that it is possible to estimate DNA degradation in male samples through Plexor HY data and suggest an alternative strategy for laboratories lacking the equipment required for the assessment of DNA integrity through dedicated qPCR assays.

A forensic genetic investigation reveals a captive origin for a wild alien population of raccoons in Italy.

Invasive alien species have extensively impacted the ecosystems, where they may affect the native biodiversity. The North American raccoon Procyon lotor is one of the most successful invaders in Europe since its introduction in the early twentieth century. In Italy, a wild population was first established in the North at the beginning of the 2000s following a local introduction event. A further self-sustaining population was reported ten years later in Central Italy. To support an official investigation by the authorities, who suspected a captive origin of the free-ranging raccoons in Central Italy, we used nuclear and mitochondrial DNA markers, combined with different statistical approaches, to characterise their gene pool and trace the source of the founders. Results revealed that founders came from a private zoo-park from which they had inadvertently escaped, soon establishing a reproductive population in the wild. Additionally, our mitochondrial DNA data were used to supplement the haplotype variability known to date in captive and wild raccoons from Europe, Asia and their native range. The comparisons allowed us to update previous networks based on the control region with a new mitochondrial lineage, which had not been detected so far.

From Jane Doe to Sofia: DNA Extraction Protocol from Bones and Teeth without Liquid Nitrogen for Identifying Skeletal Remains.

DNA analysis plays a crucial role in forensic investigations, helping in criminal cases, missing persons inquiries, and archaeological research. This study focuses on the DNA concentration in different skeletal elements to improve human identification efforts. Ten cases of unidentified skeletal remains brought to the Institute of Forensic Medicine in Timisoara, Romania, underwent DNA analysis between 2019 and 2023. The results showed that teeth are the best source for DNA extraction as they contain the highest concentration of genetic material, at 3.68 ng/µL, compared to the petrous temporal bone (0.936 ng/µL) and femur bone (0.633 ng/µL). These findings highlight the significance of teeth in forensic contexts due to their abundant genetic material. Combining anthropological examination with DNA analysis enhances the understanding and precision of identifying human skeletal remains, thus advancing forensic science. Selecting specific skeletal elements, such as the cochlea or teeth, emerges as crucial for reliable genetic analyses, emphasizing the importance of careful consideration in forensic identification procedures. Our study concludes that automated DNA extraction protocols without liquid nitrogen represent a significant advancement in DNA extraction technology, providing a faster, more efficient, and less labor-intensive method for extracting high-quality DNA from damaged bone and tooth samples.

Biogeographical Ancestry Analyses Using the ForenSeqTM DNA Signature Prep Kit and Multiple Prediction Tools.

The inference of biogeographical ancestry (BGA) can assist in police investigations of serious crime cases and help to identify missing people and victims of mass disasters. In this study, we evaluated the typing performance of 56 ancestry-informative SNPs in 177 samples using the ForenSeq™ DNA Signature Prep Kit on the MiSeq FGx system. Furthermore, we compared the prediction accuracy of the tools Universal Analysis Software v1.2 (UAS), the FROG-kb, and GenoGeographer when inferring the ancestry of 503 Europeans, 22 non-Europeans, and 5 individuals with co-ancestry. The kit was highly sensitive with complete aiSNP profiles in samples with as low as 250pg input DNA. However, in line with others, we observed low read depth and occasional drop-out in some SNPs. Therefore, we suggest not using less than the recommended 1ng of input DNA. FROG-kb and GenoGeographer accurately predicted both Europeans (99.6% and 91.8% correct, respectively) and non-Europeans (95.4% and 90.9% correct, respectively). The UAS was highly accurate when predicting Europeans (96.0% correct) but performed poorer when predicting non-Europeans (40.9% correct). None of the tools were able to correctly predict individuals with co-ancestry. Our study demonstrates that the use of multiple prediction tools will increase the prediction accuracy of BGA inference in forensic casework.

DNA methylation-based organ tissue identification: Marker identification, SNaPshot multiplex assay development, and interlaboratory comparison.

Identifying body fluids and organ tissues is highly significant as they can offer crucial evidence in criminal investigations and aid the court in making informed decisions, primarily through evaluating the biological source and possibly at the activity level up to death or fatal damage. In this study, organ tissue-specific CpG markers were identified from Illumina's methylation EPIC array data of nine organ tissues, including epidermis, dermis, heart, skeletal muscle, blood, kidney, brain, lung, and liver, from autopsies of 10 Koreans. Through the validation test using 43 samples, 18 hypomethylation markers, with two markers for each organ tissue type, were selected to construct a SNaPshot assay. Two multiplex assays involving forward and reverse SBE primers were designed to help investigators accurately determine the organ origin of the analyzed tissue samples through repeated analysis of the same PCR products for markers. The developed multiplex demonstrated high accuracy, achieving 100.0 % correct detection of the presence of nine organ tissue types in 88 samples from autopsies of 10 Asians. However, two lung samples showed additional positive indications of the presence of blood. An interlaboratory comparison using 80 autopsy samples (heart, skeletal muscle, blood, kidney cortex, kidney medulla, brain, lung, and liver) from 10 individuals in Germany revealed overall comparable results with correct detection of the presence of eight organ tissue types in 92.5 % samples (74 of 80 samples). In the case of six samples, it was impossible to determine the correct tissue successfully due to drop-outs of unmethylation signals at target tissue marker loci. One of these lung samples revealed only non-intended off-target signals for blood. The observed differences might be due to differences in sample collection during routine autopsy, technical differences due to the PCR cycler, and the threshold used for signal calling. Indicating the presence of additional tissue type and off-target unmethylation signals seems alleviated by applying more stringent hypomethylation thresholds. Therefore, the developed SNaPshot multiplex assays will be valuable for forensic investigators dealing with organ tissue identification, as well as for prosecutors and defense aiming to establish the circumstances that occurred at the crime scene.

Developmental validation of an mRNA kit: A 5-dye multiplex assay designed for body-fluid identification.

Identifying the sources of biosamples found at crime scenes is crucial for forensic investigations. Among the markers used for body fluid identification (BFI), mRNA has emerged as a well-studied marker because of its high specificity and remarkable stability. Despite this potential, commercially available mRNA kits specifically designed for BFI are lacking. Therefore, we developed an mRNA kit that includes 21 specific mRNA markers of body fluids, along with three housekeeping genes for BFI, to identify four forensic-relevant fluids (blood, semen, saliva, and vaginal fluids). In this study, we tested 451 single-body-fluid samples, validated the universality of the mRNA kit, and obtained a gene expression profile. We performed the validation studies in triplicates and determined the sensitivity, specificity, stability, precision, and repeatability of the mRNA kit. The sensitivity of the kit was found to be 0.1 ng. Our validation process involved the examination of 59 RNA mixtures, 60 body fluids mixtures, and 20 casework samples, which further established the reliability of the kit. Furthermore, we constructed five classifiers that can handle single-body fluids and mixtures using this kit. The classifiers output possibility values and identify the specific body fluids of interest. Our results showed the reliability and suitability of the BFI kit, and the Random Forest classifier performed the best, with 94% precision. In conclusion, we developed an mRNA kit for BFI which can be a promising tool for forensic practice.

Development and validation of a novel 30-plex STR assay for canine individual identification and parentage testing.

Domestic dogs are helpers in outdoor human work and companions for families; thus, individual canine identification and parentage testing are crucial in certain fields, including forensics and breeding programs. In this study, a six-dye fluorescent labeling multiplex amplification system containing 29 canine short tandem repeats (STRs) and the sex-determining marker DAmel was developed. The system was called the Tronfo Canine 30-plex STR Kit and was further validated according to the Scientific Working Group on DNA Analysis Methods and the Organization of Scientific Area Committees for Wildlife Forensics guidelines, including tests for PCR conditions, precision, species specificity, sensitivity, stability, repeatability and reproducibility, a population study, and a study of 16 paternity test cases. The results indicated that the novel canine STR assay was accurate, specific, reproducible, stable, and robust. Complete profiles were obtained with 31.25 pg of canine DNA. Additionally, 500 unrelated canine individuals were investigated using this novel system, and the combined power of discrimination and exclusion values were 0.999999999999999999 and 0.999996451039850, respectively. These results suggest that the Tronfo Canine 30-plex STR Kit is highly polymorphic, informative, and suitable for individual canine identification and parentage testing.

Development and validation of a new multiplex panel using SNaPshot-based DIP-TriSNP markers for forensic DNA mixtures.

Short tandem repeat analysis is challenging when dealing with unbalanced mixtures in forensic cases due to the presence of stutter peaks and large amplicons. In this research, we propose a novel genetic marker called DIP-TriSNP, which combines deletion/insertion polymorphism (DIP) with tri-allelic single nucleotide polymorphism in less than 230 bp length of human genome. Based on multiplex PCR and SNaPShot, a panel, including 14 autosomal DIP-TriSNPs and one Y chromosomal DIP-SNP, had been developed and applied to genotyping 102 unrelated Han Chinese individuals in Sichuan of China and simulated a mixture study. The panel sensitivity can reach as low as 0.1 ng DNA template, and the minor contributor of DNA can be detected with the highest ratio of 19:1, as indicated by the obtained results. In the Sichuan Han population, the cumulative probability of informative genotypes reached 0.997092, with a combined power of discrimination of 0.999999998801. The panel was estimated to detect more than two alleles in at least one locus in 99.69% of mixtures of the Sichuan Han population. In conclusion, DIP-TriSNPs have shown promising as an innovative DNA marker for identifying the minor contributor in unbalanced DNA mixtures, offering advantages such as short amplifications, increased polymorphism, and heightened sensitivity.

PCR in Forensic Science: A Critical Review.

The polymerase chain reaction (PCR) has played a fundamental role in our understanding of the world, and has applications across a broad range of disciplines. The introduction of PCR into forensic science marked the beginning of a new era of DNA profiling. This era has pushed PCR to its limits and allowed genetic data to be generated from trace DNA. Trace samples contain very small amounts of degraded DNA associated with inhibitory compounds and ions. Despite significant development in the PCR process since it was first introduced, the challenges of profiling inhibited and degraded samples remain. This review examines the evolution of the PCR from its inception in the 1980s, through to its current application in forensic science. The driving factors behind PCR evolution for DNA profiling are discussed along with a critical comparison of cycling conditions used in commercial PCR kits. Newer PCR methods that are currently used in forensic practice and beyond are examined, and possible future directions of PCR for DNA profiling are evaluated.