Effects of Alkaline Extraction pH on Amino Acid Compositions, Protein Secondary Structures, Thermal Stability, and Functionalities of Brewer's Spent Grain Proteins.

A high alkaline pH was previously demonstrated to enhance the extraction yield of brewer's spent grains (BSG) proteins. The effects of extraction pH beyond the extraction yield, however, has not been investigated before. The present work examined the effects of extraction pH (pH 8-12) on BSG proteins' (1) amino acid compositions, (2) secondary structures, (3) thermal stability, and (4) functionalities (i.e., water/oil holding capacity, emulsifying, and foaming properties). The ideal extraction temperature (60 °C) and BSG-to-solvent ratio (1:20 w/v) for maximizing the extraction yield were first determined to set the conditions for the pH effect study. The results showed that a higher extraction pH led to more balanced compositions between hydrophilic and hydrophobic amino acids and higher proportions of random coils structures indicating increased protein unfolding. This led to superior emulsifying properties of the extracted proteins with more than twofold improvement between pH 8 and a pH larger than 10. The extraction pH, nevertheless, had minimal impact on the water/oil holding capacity, foaming properties, and thermal denaturation propensity of the proteins. The present work demonstrated that a high alkaline pH at pH 11-12 was indeed ideal for both maximizing the extraction yield (37-46 wt.%) and proteins' functionalities.

Quantitative determination of prothioconazole in wheat grain, soybean, and pond water based on a polyclonal antibody.

Prothioconazole and its metabolite are considered a potential threat to human health and environmental safety. Thus, the development of a sensitive and rapid detection method for prothioconazole is crucial to ensure the safety of agricultural products. In this study, a new hapten of prothioconazole was designed and synthesized, and a selective polyclonal antibody with high affinity against prothioconazole was produced, which was obtained from immunized New Zealand white rabbits. Based on the polyclonal antibody, an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) and indirect competitive chemiluminescence enzyme immunoassay (ic-CLEIA) were developed for detecting prothioconazole pesticides. Under optimized experimental conditions, the limit of quantification (LOQ) values for ic-CLEIA and ic-ELISA were 1.8 and 10.7 ng mL-1, respectively. The results demonstrated that the sensitivity (LOQ) achieved by ic-CLEIA was more than five times higher compared to that obtained with ic-ELISA. In addition, the recoveries obtained by adding standard prothioconazole to wheat grain, soybean, and pond water samples were in the range of 81.9 to 104.7% for ic-ELISA and 89.0 to 118.0% for ic-CLEIA.

Protein content prediction of rice grains based on hyperspectral imaging.

This study utilized hyperspectral imaging technology combined with mathematical modeling methods to predict the protein content of rice grains. Firstly, the Kjeldahl method was used to determine the protein content of rice grains, and different preprocessing techniques were applied to the spectral information. Then, a prediction model for rice grain protein content was developed by combining the spectral data with the protein content. After performing multiplicative scatter correction (MSC) preprocessing and selecting feature wavelengths based on successive projections algorithm (SPA), the multivariate linear regression (MLR) model showed the best prediction performance, with a calibration set R2C of 0.9393, a validation set R2V of 0.8998, an RMSEV of 0.1725, and an RPD of 3.16. Finally, the quantitative protein content model was mapped pixel by pixel to visualize the distribution of rice protein, providing possibilities for non-destructive protein content detection.

Effect of pH and temperature on tropane alkaloids within a processing strategy to provide safe infant cereal-based food.

Tropane alkaloids (TAs) are secondary metabolites from weeds that can contaminate cereals and vegetables during harvest. Due to their toxicity, the Regulation (EC) 2023/915 sets maximum levels for atropine and scopolamine in cereal-based foods for infants containing millet, sorghum, buckwheat or their derived products. The aim of this study was to evaluate the effect of pH and temperature on the stability of TAs, as possible parameters in thermal processing to mitigate this chemical hazard in cereal-based infant food. The effect of pH (4 and 7) and temperature (80 °C and 100 °C) was assessed in buffer solutions. Also, treatment at 180 °C was performed in spiked and naturally incurred millet flour to assess the effect of high temperature, simulating cooking or drying, on the stability of TAs in the cereal matrix. The fate of 24 TAs was assessed by UHPLC-MS/MS. TAs showed high thermostability, although it was variable depending on the specific compound, pH, temperature and treatment time. In buffer solutions, higher degradation was found at 100 °C and pH 7. In spiked millet flour at 180 °C for 10 min, scopolamine and atropine contents decreased by 25 % and 22 %, similarly to other TAs which also showed a slow thermal degradation. Atropine, scopolamine, anisodamine, norscopolamine, scopine and scopoline were found in naturally contaminated millet flour. Interestingly, naturally incurred atropine was more thermostable than when spiked, showing a protective effect of the cereal matrix on TAs degradation. The present results highlight the need for an accurate monitorization of TAs in raw materials, as this chemical hazard may remain in infant cereal-based food even after intense thermal processing.

Comparative study on the effects of grain blending on functional compound content and in vitro biological activity.

In this study, changes in bioactive compound contents and the in vitro biological activity of mixed grains, including oats, sorghum, finger millet, adzuki bean, and proso millet, with eight different blending ratios were investigated. The total phenolic compounds and flavonoid contents ranged from 14.43-16.53 mg gallic acid equivalent/g extract and 1.22-5.37 mg catechin equivalent/g extract, respectively, depending on the blending ratio. The DI-8 blend (30% oats, 30% sorghum, 15% finger millet, 15% adzuki bean, and 10% proso millet) exhibited relatively higher antioxidant and anti-diabetic effects than other blending samples. The levels of twelve amino acids and eight organic acids in the grain mixes were measured. Among the twenty metabolites, malonic acid, asparagine, oxalic acid, tartaric acid, and proline were identified as key metabolites across the blending samples. Moreover, the levels of lactic acid, oxalic acid, and malonic acid, which are positively correlated with α-glucosidase inhibition activity, were considerably higher in the DI-blending samples. The results of this study suggest that the DI-8 blend could be used as a functional ingredient as it has several bioactive compounds and biological activities, including anti-diabetic activity.

Influence of fermentation conditions, and the blends of sorghum and carrot pulp supplementation on the nutritional and sensory quality of tef injera.

Tef [Eragrostis tef (Zucc.) Trotter], an ancient cereal primarily grown in Ethiopia, is becoming increasingly popular worldwide due to its high iron content and gluten-free nature. However, it has been reported that injera produced only with tef flour lack certain vital nutrients. Therefore, this specific study was conducted to supplement tef injera with other food materials of better nutritional value and compensate its expensive market price with sorghum cereal flour. The effect of fermentation conditions, and the sorghum and carrot pulp blending ratio on the nutritional value and sensory quality of tef injera was investigated. The factorial approach of the experimental design was conducted considering the nutritional value and sensory quality of the injera made of three main blending ratios of tef, sorghum, and carrot (60% tef: 30% sorghum: 10% carrot pulp, 45% tef: 45% sorghum: 10% carrot pulp and 30% tef: 60% sorghum: 10% carrot pulp) as experiential variables. The raw materials and injera were characterised for their proximate composition, physicochemical property, mineral composition, microbial analysis, and sensory attributes, using standard methods. The results of the study show that fermentation conditions and blending ratios have a significant effect on the nutritional, anti-nutritional, mineral content, microbial quality, and sensory properties of blended injera products, where higher values of ash, crude protein, crude fat, Total titratable acidity (TTA), Fe, Zn, and Ca (2.30%, 11.34%, 2.62%, 3.53, 32.97 mg/100 g, 2.98 mg/100 g and 176.85 mg/100 g, respectively) were analyzed for the co-fermented injera sample. In addition, a lower microbial count was observed in co-fermented injera samples, whereas microbial counts in injera samples prepared from carrot pulp-supplemented dough after the co-fermentation of tef and sorghum flours were observed to be higher. The injera product made using blending ratio of 60% tef: 30%sorghum: 10% carrot co-fermented was found to be the optimum result due to its very good nutritional improvement (i.e., reduction of some anti-nutritional factors, microbial contents, pH and increased contents of some minerals, crude protein, crude fat, TTA and improved most of the sensory quality of the supplemented injera product). According to this study, sorghum and carrot supplementation on tef could improve the nutritional value of injera while also providing an instant remedy for the growing price of tef.

Genome-wide association study and linkage mapping reveal TaqW-6B associated with water-extractable arabinoxylan content in wheat grain.

KEY MESSAGE: A novel QTL, TaqW-6B of water-extractable arabinoxylan content in the wheat grain on chromosome 6BL was identified and fine mapped in a narrow region 3.8 Mb. Water-extractable arabinoxylan (WE-AX), an important component of hemicellulose, is associated with various abundant health benefits. In this study, QTLs for WE-AX content were detected in two populations: (1) a recombinant inbred line (RIL) population with 164 lines derived from a cross between Avocet and Chilero (AC population) genotyped with diversity array technology (DArT), and (2) a natural population of 243 varieties (CH population) genotyped with the Axiom wheat 660 K single-nucleotide polymorphism (SNP) array. A stable QTL Qwe-ax.haust-6B, explaining 8.51-15.59% of the phenotypic variance, was mapped in the physical interval 459.38-572.09 Mb on the long arm of chromosome 6B in the AC population, tightly linked with DArT markers 3,944,740 and 4,991,038 under three experimental conditions. The Qwe-ax.haust-6B was further narrowed down to be delimited in the physical interval 516.47-571.58 Mb on chromosome 6BL, explaining 5.86-16.27% of the phenotypic variance in the CH population. Furthermore, we developed high-throughput kompetitive allele-specific PCR (KASP) markers to reconstruct the genetic linkage map in the AC population, and Qwe-ax.haust-6B was fine mapped into a narrow region named TaqW-6B, which was compressed between KASP-6B-3 and KASP-6B-6 at a physical distance of 3.8 Mb. In the meanwhile, the markers were also validated in a natural population of 160 wheat lines (NP population). Consequently, this study is of great importance to provide the theoretical basis for cloning the key gene and developing functional markers for molecular breeding.

The accumulation of cadmium and lead in wheat grains is primarily determined by the soil-reducible cadmium level during wheat tillering.

The significant increase in cadmium (Cd) and lead (Pb) pollution in agricultural soil has greatly heightened environmental contamination issues and the risk of human diseases. However, the mechanisms underlying the transformation of Cd and Pb in soil as well as the influencing factors during their accumulation in crop grains remain unclear. Based on the analysis of the distribution trend of Cd and Pb in soil during the growth and development stages of wheat (tillering, filling, and maturity) in alkaline heavy metal-polluted farmland in northern China, this study investigated the response mechanism of soil heavy metal form transformation to soil physicochemical properties, and elucidated the main determining periods and influencing factors for Cd and Pb enrichment in wheat grains. The results showed that an increase in CEC and SOM levels, along with a decrease in pH level, contributed to enhancing the bioavailability of Cd in the soil. This effect was particularly evident during the tillering stage and grain filling stage of wheat. Nevertheless, the effects of soil physicochemical properties on bioavailable Pb was opposite to that on bioavailable Cd. The enrichment of Cd and Pb in grain was significantly influenced by soil pH (r = -0.786, p < 0.01), SOM (r = 0.807, p < 0.01), K (r = -0.730, p < 0.01), AK (r = 0.474, p = 0.019), and AP (r = -0.487, p = 0.016). The reducible form of Cd in soil during the wheat tillering stage was identified as the primary factor contributing to the accumulation of Cd and Pb in wheat grains, with a significant contribution rate of 84.5%. This study provides a greater scientific evidence for the management and risk control of heavy metal pollution in alkaline farmland.

Solid-state fermentation using wheat bran to produce glucose syrup and functional cereal bars.

Wheat bran is one of the most abundant by-products from grain milling, which can be used as substrate for solid-state fermentation (SSF) to obtain enzymes able to convert this agro-industrial waste into glucose syrup, which in turn can be applied for the production of different food products. The present study aimed to determine centesimal composition of wheat bran, obtain enzymatic extract that converts wheat bran into wheat glucose syrup (WGS), produce rice flakes cereal bars (RFCB), and evaluate their nutritional composition and the presence of functional compounds, as well as their antioxidant potential. Determination of centesimal composition of wheat bran demonstrated its nutritional potential. Enzymatic extract was obtained and it converted wheat bran into WGS, which were applied to rice flakes producing RFCB. These cereal bars proved to be a source of dietary fiber (1.8 g) and soluble protein (7.2 g) while RCFB produced with corn glucose syrup did not present these nutritional components. In addition, RFCB produced with WGS showed polyphenolic compounds, among them flavonoids, which exhibited antioxidant activity by DPPH and ABTS radical scavenging (47.46% and 711.89 µM Trolox Equivalent/g, respectively), and iron ion reduction (71.70 µM Trolox equivalent/g). Final product showed a decrease in caloric value and sodium content. Therefore, the present study showed that the bioprocess of SSF yields a nutritional, ecological, and functional food product, which might be of great interest for food industry, adding nutritional and functional value to a well-stablished product.

Lyophilized rumen fluid as a ruminal fermentation modifier in high grain-fed acidotic goats.

Rumen cud transfaunation re-establishes rumen micro environment and improves fermentation in recipient animals affected with digestive disorders. Preserving rumen cud or fluid will increase its availability for the treatment of rumen fermentation disorders, without having to maintain donor animals. Rumen fluid collected from healthy goats, fed standard ration having roughage 70% and concentrate 30%, was lyophilized (prefreezing -80 °C, 48 h; lyophilization -45 °C, 32 h) using 5% glycerol as cryoprotectant. The 16 S metagenome analysis of the lyophilized rumen fluid (LRF) revealed an abundance of Prevotella (33.2%). Selenomonas ruminantium (1.87%) and Megasphaera elsdenii (0.23%) were also present. Twenty-four goats having history of high grain feeding and exhibiting clinical symptoms of rumen fermentation disorders were randomly distributed into either one of the two treatment groups viz., T1 = oral administration of LRF 31 g/animal/day and T2 = oral administration of sodium bicarbonate (SB) 15 g/animal/day. Post intervention LRF and SB, improved animal body condition, feed intake, fecal consistency, elevated the ruminal pH at 48 h, reduced propionate and lactate at 48 h, reduced total volatile fatty acids (TVFA) and ammonia nitrogen at 24 h. Significant reduction in serum blood urea nitrogen (BUN) and urea levels were observed even from 24 h post intervention irrespective of the treatments. LRF significantly improved acetate and decreased propionate production compared to SB. LRF at 7.5% (v/v) can thus be used to counteract ruminal fermentation disorders in goats sequel to high grain ration.

Humic Acid-Functionalized Lignin-Based Coatings Regulate Nutrient Release and Promote Wheat Productivity and Grain Quality.

The rational application of fertilizers is crucial for achieving high crop yields and ensuring global food security. The use of biopolymers for slow-release fertilizers (SRFs) development has emerged as a game-changer and environmentally sustainable pathway to enhance crop yields by optimizing plant growth phases. Herein, with a renewed focus on circular bioeconomy, a novel functionalized lignin-based coating material (FLGe) was developed for the sustained release of nutrients. This innovative approach involved the extraction and sustainable functionalization of lignin through a solvent-free esterification reaction with humic acid─an organic compound widely recognized for its biostimulant properties in agriculture. The primary objective was to fortify the hydration barrier of lignin by reducing the number of its free hydroxyl groups, thereby enhancing release control, while simultaneously harnessing the agronomic benefits offered by humic acid. After confirming the synthesis of functionalized lignin (FLGe) through 13C NMR analysis, it was integrated at varying proportions into either a cellulosic or starch matrix. This resulted in the creation of five distinct formulations, which were then utilized as coatings for diammonium phosphate (DAP) fertilizer. Experimental findings revealed an improved morphology and hardness (almost 3-fold) of DAP fertilizer granules after coating along with a positive impact on the soil's water retention capacity (7%). Nutrient leaching in soil was monitored for 100 days and a substantial reduction of nutrients leaching up to 80% was successfully achieved using coated DAP fertilizer. Furthermore, to get a fuller picture of their efficiency, a pot trial was performed using two different soil textures and demonstrated that the application of FLGe-based SRFs significantly enhanced the physiological and agronomic parameters of wheat, including leaf evolution and root architecture, resulting in an almost 50% increase in grain yield and improved quality. The results proved the potential of lignin functionalization to advance agricultural sustainability and foster a robust bioeconomy aligning with the premise "from the soil to the soil".

Polybrominated diphenyl ethers (PBDEs) decreased the protein quality of rice grains by disturbing amino acid metabolism.

Polybrominated diphenyl ethers (PBDEs) in soils posed potential risks to crop growth and food safety due to their prevalence and persistence. PBDEs were capable of being absorbed and accumulated into crops, impacting their growth, whereas the interference on metabolic components and nutritional composition deserves further elucidation. This study integrated a combined non-targeted and targeted metabolomics method to explore the influences of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), 2,2',4,4',5-pentabromodiphenyl ether (BDE-99) and decabromodiphenyl ether (BDE-209) on the metabolic responses of rice (Oryza sativa). Metabolic pathways, which were associated with sugars, organic acids, and amino acids, were significantly disturbed under PBDE stresses. Particularly, 75% of the marked altered pathways belonged to amino acid metabolism, with alanine/aspartate/glutamate metabolism being commonly enhanced. The degradation of aspartic acid promoted the formation of downstream amino acids, among which the levels of lysine, methionine, isoleucine, and asparagine were increased by 1.31-3.15 folds compared to the control. Thus, the antioxidant capacity in rice plants was enhanced, particularly through the significant promotion of ascorbic acid-glutathione (AsA-GSH) cycle in rice leaves. The amino acids were promoted to resist reactive oxygen species (ROS) efficiently, thus were deficient for nutrient storage. When exposed to 4 µmol/kg PBDEs, the contents of amino acids and proteins in grains decreased by 9.1-32.1% and 8.6-34.8%, respectively. In particular, glutelin level was decreased by 5.6-41.2%, resulting in a decline in nutritional quality. This study demonstrated that PBDEs deteriorated the protein nutrition in rice grains by affecting amino acid metabolism, providing a new perspective for evaluating the ecological risks of PBDEs and securing agricultural products.

Bayesian risk prediction model: An accessible strategy to predict cadmium contamination risk in wheat grain grown in alkaline soils.

Excessive cadmium (Cd) concentration in wheat grain is becoming a widespread concern in China. Considering the complexity of Cd transfer in the soil-wheat system, how the Cd risk in wheat grain be accurately predicted from the limited details available is of great significance for the risk management of Cd. Bayes' theory could leverage existing data by combining prior information and observational data, providing a promising strategy with which to calculate a more robust posterior probability of a grain sample exceeding the food safety standard (FSS) for Cd (0.1 mg kg-1). In the current study, a risk prediction model, based on Bayes' theory, was established to achieve a more accurate prediction of the wheat grain Cd risk from a limited number of soil parameters. The risk prediction model could predict the risk probability of wheat grain with a Cd concentration exceeding the FSS under a given soil concentration of either total Cd or diethylenetriaminepentaacetic acid (DTPA)-extractable Cd. Soil total Cd concentration proved to be a better variable for the model with greater predictive accuracy. The model predicted that fewer than 5% of the wheat grain would have a Cd concentration exceeding the FSS when grown in soil with a total Cd concentration of less than 0.299 mg kg-1. The risk probability rose significantly to 50% when the soil total Cd reached 0.778 mg kg-1. The accuracy of the model was greater than the widely applied multiple linear regression model, whereas previously published data from similar soil conditions also confirmed that the Bayesian model could predict wheat Cd risk with minimal error. The proposed model provides an accurate, accessible and cost-effective methodology for predicting Cd risk in wheat grown in alkaline soils before harvest. The wider application to other soil conditions, crops or contaminants using the Bayesian model is also promising for risk management authorities.

Co-contamination and interactions of multiple mycotoxins and heavy metals in rice, maize, soybeans, and wheat flour marketed in Shanghai City.

Mycotoxins and heavy metals extensively contaminate grains and grain products, posing severe health risks. This work implements validated ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) and inductively coupled plasma mass spectrometry (ICP-MS) methods to quantify the concentration of 12 mycotoxins and five heavy metals in rice, maize, soybeans, and wheat flour samples marketed in Shanghai. The mixed contamination characteristics were analyzed using correlation cluster analysis and co-contamination index, and the probabilities of all cross combinations of contaminations were analyzed using a self-designed JAVA language program. The results showed that grains and grain products were frequently contaminated with both mycotoxins and heavy metals, mostly with deoxynivalenol (DON), 3-acetyl-deoxynivalenol (3-ADON), 15-acetyl-deoxynivalenol (15-ADON), ochratoxin A (OTA), aflatoxins, fumonisin B1 (FB1), fumonisin B2 (FB2), fumonisin B3 (FB3), arsenic (As), chromium (Cr) and cadmium (Cd). All the samples (100 %) were contaminated with two or more contaminants, and 77.3 % of the samples were co-contaminated with more than four contaminants. In cereals and cereal products, the following combinations were closely associated: (FB3 +3-ADON), (FB1 +As), (FB1 +FB2), (DON+FB1), (DON+Cd), (As+Cd), (DON+Cd+As), (FB1 +FB2 +As), and (DON+3-ADON+15-ADON). The results indicated that mycotoxins and heavy metals frequently co-occurred in Shanghai grains and grain products, and they provided primary data for safety assessments, early warnings, and regulatory measures on these contaminants to protect public health.

A method for the quantitative analysis of polar anionic pesticides in milk/infant formula, cereals and fruit and vegetables using ion chromatography coupled to tandem mass spectrometry.

Polar pesticides such as anionic or ionisable compounds have always provided a challenge for analytical chemists. Methods of analysis have been developed using a range of techniques including normal phase chromatography, ion-pairing, derivatisation and HILIC or multi-mode chromatography. These work well with some of these compounds but, except for HILIC, all of them have their limitations and none of them cover the range required by legislation. Some of these compounds, glyphosate, chlorate and phosphonic acid, are found regularly in a range of food matrices, and therefore reliable methods of analysis are essential. This study describes an ion chromatography method with tandem mass spectrometry detection which not only covers the full range of compounds required by legislation but also can be expanded to include other anionic or ionisable pesticides and metabolites. These include glyphosate and its metabolites, glufosinate and its metabolites, ethephon and its metabolites as well as fosetyl aluminium, chlorate and perchlorate. The method is fully validated according to the performance criteria from the SANTE guidelines for the analysis of pesticides in food and feed over a wide range of matrices, including milk, infant formula, cereals and fruits and vegetables. Over 300 food samples have analysed as part of our routine monitoring program.

Rapid determination of starch and alcohol contents in fermented grains by hyperspectral imaging combined with data fusion techniques.

Starch and alcohol serve as pivotal indicators in assessing the quality of lees fermentation. In this paper, two hyperspectral imaging (HSI) techniques (visible-near-infrared (Vis-NIR) and NIR) were utilized to acquire separate HSI data, which were then fused and analyzed toforecast the starch and alcohol contents during the fermentation of lees. Five preprocessing methods were first used to preprocess the Vis-NIR, NIR, and the fused Vis-NIR and NIR data, after which partial least squares regression models were established to determine the best preprocessing method. Following, competitive adaptive reweighted sampling, successive projection algorithm, and principal component analysis algorithms were used to extract the characteristic wavelengths to accurately predict the starch and alcohol levels. Finally, support vector machine (SVM)-AdaBoost and XGBoost models were built based on the low-level fusion (LLF) and intermediate-level fusion (ILF) of single Vis-NIR and NIR as well as the fused data. The results showed that the SVM-AdaBoost model built using the LLF data afterpreprocessing by standard normalized variable was most accurate for predicting the starch content, with an R P 2 $\ R_P^2$ of 0.9976 and a root mean square error of prediction (RMSEP) of 0.0992. The XGBoost model built using ILF data was most accurate for predicting the alcohol content, with an R P 2 $R_P^2$ of 0.9969 and an RMSEP of 0.0605. In conclusion, the analysis of fused data from distinct HSI technologies facilitates rapid and precise determination of the starch and alcohol contents in fermented grains.

Insights into the starch and proteins molecular structure changes of foxtail millet sourdough: Effect of fermentation from grains of cereal to pre-meal.

This study investigated the effects of foxtail millet sourdough fermentation time (0, 8, 16, and 24 h) on the protein structural properties, thermomechanical, fermentation, dynamic rheological, starch granules crystalline regions molecular mobility, and starch microstructural characteristics. The fermentation led to a significant increase in the concentration of free amino acids from protein hydrolysis. Fourier transform infrared spectroscopy (FTIR) revealed changes in protein secondary structure and the presence of functional groups of different bioactive compounds. The result of thermomechanical properties showed a significant increase in the stability (0.70-0.79 min) and anti-retrogradation ability (2.29-3.14 Nm) of lactic acid bacteria (LAB) sourdough compared to the control dough, showing a wider processing applicability with radar profiler index. In contrast, sourdoughs with lower tan δ values had higher elasticity and strength. Scanning electron microscopy showed that the surface of the starch appeared from smooth to uneven with patchy shapes and cavities, which declined the crystallinity from 34.00 % to 21.57 %, 23.64 %, 25.09 %, and 26.34 % respectively. Fermentation changed the To, Tp, Tc, and ΔH of the starch. The results of the study will have great potential for application in the whole grain sourdough industry.

Two swords combination: Smartphone-assisted ratiometric fluorescent and paper sensors for dual-mode detection of glyphosate in edible malt.

The long-term and excessive use of glyphosate (GLY) in diverse matrices has caused serious hazard to the human and environment. However, the ultrasensitive detection of GLY still remains challenging. In this study, the smartphone-assisted dual-signal mode ratiometric fluorescent and paper sensors based on the red-emissive gold nanoclusters (R-AuNCs) and blue-emissive carbon dots (B-CDs) were ingeniously designed accurate and sensitive detection of GLY. Upon the presence of GLY, it would quench the fluorescence of B-CDs through dynamic quenching effect, and strengthen the fluorescence response of R-AuNCs due to aggregation-induced enhancement effect. Through calculating the GLY-induced fluorescence intensity ratio of B-CDs to R-AuNCs by using a fluorescence spectrophotometer, low to 0.218 µg/mL of GLY could be detected in lab in a wide concentration range of 0.3-12 µg/mL with high recovery of 94.7-103.1% in the spiked malt samples. The smartphone-assisted ratiometric fluorescent sensor achieved in the 96-well plate could monitor 0-11 µg/mL of GLY with satisfactory recovery of 94.1-107.0% in real edible malt matrices for high-throughput analysis. In addition, a portable smartphone-assisted ratiometric paper sensor established through directly depositing the combined B-CDs/R-AuNCs probes on the test strip could realize on-site measurement of 2-8 µg/mL of GLY with good linear relationship. This study provides new insights into developing the dual-signal ratiometric sensing platforms for the in-lab sensitive detection, high-throughput analysis, and on-site portable measurement of more trace contaminants in foods, clinical and environmental samples.

Alkali-assisted extraction, characterization and encapsulation functionality of enzymatic hydrolysis-resistant prolamin from distilled spirit spent grain.

Curcumin is a natural lipophilic polyphenol that exhibits significant various biological properties such as antioxidant and anti-inflammatory properties following oral administration. However, its uses have shown limitations concerning aqueous solubility, bioavailability and biodegradability that could be improved by prolamin-based nanoparticle. In this study, curcumin was encapsulated into prolamin from sorghum (SOP) and wheat (WHP) and distilled spirit spent grain (DSSGP), which was obtained after microbial proteolysis of the former two cereal grains. All the three prolamins showed clear variation of protein profiles and microstructure as confirmed by electrophoresis analysis, disulfide bond determination and Fourier-transform infrared spectroscopy (FTIR). For curcumin-loaded nanospheres (NPs) fabrication, three prolamin-based NPs shared features of spherical shape, uniform particle size, and smooth surface. The average size ranged from 122 to 193 nm depending on the prolamin variety and curcumin loading. In the experiments in vitro, curcumin showed significantly improved UV/thermal stability. Furthermore, DSSGP was more resistant to enzymatic digestion in vitro, hence achieving the controlled release of curcumin in gastrointestinal tract. Collectively, the results indicated the improved bioavailability and biodegradability of curcumin encapsulated by DSSGP, which would be an innovative potential encapsulant for effective protection and targeted delivery of hydrophobic compounds.

Rapid, on-site quantitative determination of mycotoxins in grains using a multiple time-resolved fluorescent microsphere immunochromatographic test strip.

The label probe plays a crucial role in enhancing the sensitivity of lateral flow immunoassays. However, conventional fluorescent microspheres (FMs) have limitations due to their short fluorescence lifetime, susceptibility to background fluorescence interference, and inability to facilitate multi-component detection. In this study, carboxylate-modified Eu(III)-chelate-doped polystyrene nanobeads were employed as label probes to construct a multiple time-resolved fluorescent microsphere-based immunochromatographic test strip (TRFM-ICTS). This novel TRFM-ICTS facilitated rapid on-site quantitative detection of three mycotoxins in grains: Aflatoxin B1 (AFB1), Zearalenone (ZEN), and Deoxynivalenol (DON). The limit of detection (LOD) for AFB1, ZEN, and DON were found to be 0.03 ng/g, 0.11 ng/g, and 0.81 ng/g, respectively. Furthermore, the TRFM-ICTS demonstrated a wide detection range for AFB1 (0.05-8.1 ng/g), ZEN (0.125-25 ng/g), and DON (1.0-234 ng/g), while maintaining excellent selectivity. Notably, the test strip exhibited remarkable stability, retaining its detection capability even after storage at 4 °C for over one year. Importantly, the detection of these mycotoxins relied solely on simple manual operations, and with a portable reader, on-site detection could be accomplished within 20 min. This TRFM-ICTS presents a promising solution for sensitive on-site mycotoxin detection, suitable for practical application in various settings due to its sensitivity, accuracy, simplicity, and portability.