Revision shoulder arthroplasty and proximal humeral bone loss: a comprehensive review and proposal of a new algorithm of management.

With the rising prevalence of shoulder arthroplasty, the incidence of revision shoulder arthroplasty is also increasing. The complexity of these revision procedures poses significant challenges, with bone loss being a critical factor impacting treatment outcomes. Addressing substantial humeral bone defects is crucial for ensuring implant stability and functionality. A comprehensive literature review was conducted using PubMed, Medline, and Google Scholar to identify existing classification systems for proximal humeral bone loss in the context of revision shoulder arthroplasty. The study assessed the advantages and limitations of these classifications, using this information to propose a new diagnostic and therapeutic algorithm. Several classification systems for proximal humeral bone loss were identified. McLendon et al. classify proximal humeral bone loss based on a 5-cm bone loss threshold and suggest an allograft prosthesis composite for losses exceeding this limit. Boileau's system stratifies bone loss into four types based on the extent of loss, with specific recommendations for each category. The PHAROS classification provides a detailed anatomical assessment but lacks quantitative precision. The proposed PHBL-SCORe system offers a novel algorithm incorporating preoperative radiographic measurements to determine the percentage of bone loss and guide treatment options. Proximal humeral bone loss presents significant challenges in revision shoulder arthroplasty, necessitating precise preoperative planning and classification to guide surgical intervention. Existing classification systems provide valuable frameworks but often rely on average population values, neglecting individual anatomical variations. The proposed PHBL-SCORe system offers a patient-specific approach, improving the accuracy of bone loss assessment and optimizing treatment strategies. Implementing this classification in clinical practice could enhance surgical outcomes and reduce complications associated with rRSA (revision Reverse Shoulder arthroplasty). Further studies are required to validate this algorithm and explore its long-term efficacy in diverse patient populations.

[Application of tuberosity suture combined with autogenous bone grafting in reverse total shoulder arthroplasty for elderly patients with proximal humeral fractures].

Objective: To analyze the effectiveness of tuberosity suture combined with autogenous bone grafting in reverse total shoulder arthroplasty for elderly patients with proximal humerus fracture. Methods: A clinical data of 28 patients with fresh proximal humerus fractures, who met the selection criteria and admitted between June 2014 and April 2022, was retrospectively analyzed. There were 7 males and 21 females. Age ranged from 65 to 81 years, with an average of 73.8 years. The causes of injury were 21 cases of fall, 6 cases of traffic accident, and 1 case of falling from height. The time from injury to operation ranged from 5 to 20 days with an average of 9.2 days. There were 8 cases of Neer three-part fracture and 20 cases of four-part fracture. The reverse total shoulder arthroplasty was performed, and the greater and lesser tuberosities were sutered and reconstructed with autogenous bone grafting. After operation, the Constant score, American Society for Shoulder Surgery (ASES) score, and visual analogue scale (VAS) score were used to evaluate shoulder function and pain; and the active range of motion of the shoulder joint was recorded, including flexion, external rotation, and internal rotation. X-ray films were taken to observe the position of prosthesis. According to the evaluation criteria proposed by Boileau, the healing of greater tuberosity was evaluated, and the effectiveness was compared between the patients with healed and non-healed (displacement and absorption) greater tuberosity. Results: All incisions healed by first intention after operation. All patients were followed up 24-106 months, with an average of 60.9 months. At last follow-up, the VAS score of shoulder joint ranged from 0 to 6 (mean, 1.1). The Constant score ranged from 45 to 100 (mean, 80.1). The ASES score ranged from 57 to 100 (mean, 84.7). The active range of motions of shoulder joint were 60°-160° (mean, 118°) in flexion, 0°-50° (mean, 30°) in external rotation, and corresponding to reaching the S 5-T 8 vertebral body level in internal rotation. During follow-up, no shoulder joint re-dislocation or severe shoulder instability occurred, and no revision surgery was performed. X-ray film reexamination showed that there was no loosening of the prosthesis. According to the evaluation criteria proposed by Boileau, the greater tuberosity fused in 22 cases (78.6%), displaced in 3 cases (10.7%), and absorbed in 3 cases (10.7%). The shoulder joint function and pain related evaluation indicators in the healed group were significantly better than those in the non-healed group ( P<0.05). Conclusion: Tuberosity suture combined with autogenous bone grafting is a relatively simple procedure that provides a reliable fixation for the anatomic recovery of greater and lesser tuberosities and is beneficial for the recovery of shoulder function in elderly patients with proximal humeral fractures.

Step-cut osteotomy for cubitus varus deformity with application of patient-specific instrument in children: a preliminary report.

PURPOSE: The step-cut osteotomy has been recognized as a valuable approach for addressing cubitus varus deformity, albeit one that necessitates technical proficiency. This study aims to evaluate the efficacy of the modified step-cut osteotomy technique in conjunction with patient-specific instruments by clinical and radiological assessment. METHODS: We conducted a retrospective review of patients who underwent modified step-cut osteotomy with the use of patient-specific instruments in conjunction with Kirschner wires fixation for the correction of cubitus varus deformity between April 2016 and April 2022. Follow-up was performed for a minimum of two years, during which pre-operative and post-operative clinical and radiological parameters were compared. RESULTS: Fifteen patients were enrolled in this study. The mean pre-operative humeral-elbow-wrist (HEW) of the affected side was -21.7° (ranging from -14° to -34°), while the normal side was 9.4° (ranging from 5° to 15°). The post-operation HEW of affected side was 9° (ranging from 4° to 16°). There was no significant difference between the normal side and affected side after operation (p = 0.74). Pre-operative range of motion in the affected side was 130°, while the post-operative range of motion was 132°. Fourteen patients (93.3%) were pleased with the overall appearance of their elbow. None lazy-S deformity was observed in these cases. There were no major complications. CONCLUSION: The modified step-cut osteotomy technique, utilizing patient-specific instrument in conjunction with Kirschner wires fixation was found to be a safe, reliable, and technically easy procedure for correcting cubitus varus deformity.

Fresh Osteochondral Allograft Transplantation of the Capitellum for the Treatment of Osteochondritis Dissecans.

BACKGROUND: Osteochondritis dissecans (OCD) of the humeral capitellum is a rare and challenging condition to treat. Several surgical options exist, but in the last few years, the pendulum has swung from debridement and microfracture to restoration of the articular surface. Osteochondral autografts from the rib and knee have been described, but donor-site morbidity is a concern. PURPOSE: To expand the results of fresh osteochondral allograft transplantation (FOCAT) in a previously published report with inclusion of additional patients and a longer follow-up period. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: After institutional review board approval, the charts of patients who underwent FOCAT for OCD of the capitellum between 2006 and 2022 by a single surgeon were reviewed. The majority of cases (94%) had unstable lesions (Minami grades 2 and 3). A trial of nonoperative treatment had failed in all. All patients underwent diagnostic arthroscopy, followed by a mini-open, ligament-sparing approach with grafting using commercially available guides and instruments. RESULTS: A total of 35 patients were identified, of whom 25 were male. The mean age was 16 ± 3.9 years (range, 11-32 years). There were 24 baseball players (19 pitchers and 5 position players), 5 gymnasts, 3 cheerleaders/tumblers, 1 tennis player, 1 student (who did not participate in athletics), and 1 patient with avascular necrosis from chemotherapy. Eighteen patients had a mean flexion contracture of 14.1°± 11.9°. A single osteochondral allograft plug was used in 23 patients (mean diameter, 11.3 ± 2.8 mm), and 12 patients required 2 plugs (Mastercard technique). The mean follow-up was 92.6 ± 54.5 months (range, 24-204 months). There was significant improvement in Oxford (from 25.5 ± 4.9 to 46.7 ± 3.5; P < .00001) and visual analog scale for pain (from 7.5 ± 2 to 0.3 ± 1.0; P < .0001) scores. The mean Single Assessment Numeric Evaluation score at the time of follow-up was 90.6 ± 10.8 (range, 60-100). In overhead athletes, there was significant improvement in the Kerlan-Jobe Orthopaedic Clinic score (from 40.8 ± 11.8 to 90.6 ± 10.8; P < .00001). A postoperative magnetic resonance imaging scan was obtained in 16 (46%) patients at a mean of 32.6 months. In all cases, the graft was incorporated. All overhead athletes were able to return to their sport and perform at the same level or higher for >2 years. Two elbows required a subsequent arthroscopy for loose-body removal; otherwise, there were no other complications. CONCLUSION: FOCAT is an excellent option for treating OCD lesions of the humeral capitellum. Excellent outcomes and high return-to-sport rates were observed, with midterm follow-up showing no graft failures. FOCAT eliminates donor-site morbidity.

[Bone-cartilage transfer for osteochondritis dissecans of the humeral capitellum]. / Knorpel-Knochen-Transfer bei Osteochondrosis dissecans des Capitulum humeri.

OBJECTIVE: Treatment of focal cartilage defects of the humeral capitellum with autologous bone-cartilage cylinders to prevent development of arthritis of the elbow joint. INDICATIONS: High-grade, unstable lesions (> 50% of the capitellum, grade III-IV according to Dipaola), including those involving the lateral edge of the capitellum and with a depth of up to 15 mm. CONTRAINDICATIONS: Stable lesions and generalized osteochondritis of the capitellum (including Panner's disease), as well as a relative contraindication for lesions > 10 mm, as the largest punch has a maximum diameter of 10 mm. SURGICAL TECHNIQUE: Arthroscopy of the elbow joint, transition to open surgery. First, the size of the cartilage defect in the capitellum is determined. Then, one (or several) osteochondral cylinders (OATS Arthex) are removed, which as far as possible completely encompass the defect zone. Corresponding intact bone-cartilage cylinders are obtained from the ipsilateral proximal lateral femoral condyle, each with a 0.3 mm larger diameter via an additive miniarthrotomy. The "healthy" cylinders are then inserted into the defect zone in a "press fit" technique. POSTOPERATIVE MANAGEMENT: An upper arm cast in neutral position of the hand for 10-14 days, simultaneously beginning physiotherapy (active-assisted movements) and lymphatic drainage. As soon as painless range of motion (ROM) is restored (goal: by week 6), isometric training can be started. Resistance training starts from week 12. Competitive sports are only recommended after 6(-8) months. RESULTS: The current state of research on the surgical treatment of OCD of the humeral capitellum using autologous osteochondral grafts shows mostly promising results. A recent meta-analysis of 24 studies reports a significantly higher (p < 0.01) rate of return to sports (94%) compared to fragment fixation (64%) or microfracture and debridement (71%) [41]. However, the increased donor-site morbidity must be taken into account (ca. 7.8%).

[Autologous minced cartilage implantation for focal cartilage lesions of the humeral capitellum]. / Autologes Minced Cartilage bei fokalen Knorpelschäden des Capitulum humeri.

OBJECTIVE: The goal of minced cartilage implantation (MCI) is to restore an intact cartilage surface in focal osteochondral lesions of the humeral capitellum. INDICATIONS: The indications for MCI are limited osteochondral lesions at the humeral capitellum, also at the head of the radius, with intact cartilage border as well as in situ or a completely detached fragment, and free joint bodies (grade II-grade V according to Hefti). CONTRAINDICATIONS: Contraindications for MCI are already concomitant or associated cartilage damage as well as bilateral osteochondral lesions and insufficient available cartilage material. SURGICAL TECHNIQUE: After diagnostic arthroscopy to detect possible concomitant pathologies and to exclude already corresponding cartilage lesions, the arthroscope is flipped posterolaterally over the high posterolateral portal and a second portal is created under visualization via the soft spot. Initially, debridement of the focal cartilage defect, assessment of the marginal zone, and/or salvage of free joint bodies. Using a smooth shaver and the filter provided, the partially or even completely detached cartilage fragment is unidirectionally fragmented under continuous suction. The remaining defect with a stable marginal zone is cleanly curetted, and the joint is completely dried. The fragmented cartilage collected in the filter is bonded to a membrane using autologous conditioned plasma (ACP) and then arthroscopically applied to the defect via a cannula, sealed using thrombin and fibrin. POSTOPERATIVE MANAGEMENT: Postoperative immobilization in a cast for at least 24 h is required. Afterwards, free exercise of the joint is possible, but no loading should be maintained for 6 weeks. Return to sport after 3 months. RESULTS: Good to very good clinical and MRI morphologic results are already evident in the short-term course. Prospective and retrospective multicenter studies are needed to evaluate future long-term results.

Biomechanical Design Optimization of Distal Humerus Fracture Plates: A Review.

The goal of this article was to review studies on distal humerus fracture plates (DHFPs) to understand the biomechanical influence of systematically changing the plate or screw variables. The problem is that DHFPs are commonly used surgically, although complications can still occur, and it is unclear if implant configurations are always optimized using biomechanical criteria. A systematic search of the PubMed database was conducted to identify English-language biomechanical optimization studies of DHFPs that parametrically altered plate and/or screw variables to analyze their influence on engineering performance. Intraarticular and extraarticular fracture (EAF) data were separated and organized under commonly used biomechanical outcome metrics. The results identified 52 eligible DHFP studies, which evaluated various plate and screw variables. The most common plate variables evaluated were geometry, hole type, number, and position. Fewer studies assessed screw variables, with number and angle being the most common. However, no studies examined nonmetallic materials for plates or screws, which may be of interest in future research. Also, articles used various combinations of biomechanical outcome metrics, such as interfragmentary fracture motion, bone, plate, or screw stress, number of loading cycles to failure, and overall stiffness (Os) or failure strength (Fs). However, no study evaluated the bone stress under the plate to examine bone "stress shielding," which may impact bone health clinically. Surgeons treating intraarticular and extraarticular distal humerus fractures should seriously consider two precontoured, long, thick, locked, and parallel plates that are secured by long, thick, and plate-to-plate screws that are located at staggered levels along the proximal parts of the plates, as well as an extra transfracture plate screw. Also, research engineers could improve new studies by perusing recommendations in future work (e.g., studying alternative nonmetallic materials or "stress shielding"), clinical ramifications (e.g., benefits of locked plates), and study quality (e.g., experimental validation of computational studies).

Combining robotics and 3D printing facilitates closed reduction of humeral shaft fractures using a minimally invasive plate as a reduction template: A proof-of-concept study.

BACKGROUND: Minimally invasive percutaneous plate osteosynthesis for humeral shaft fractures (HSFs) has limitations due to malreduction and radiation exposure. To address these limitations, we integrated robotics and 3D printing by incorporating plates as reduction templates. METHOD: The innovative technology facilitated closed reduction of HSFs in the operating theatre using 18 models with cortical marking holes. The dataset of the precontoured plate was imported into 3D planning software for virtual fixation and screw path planning. The models were divided into half to simulate transverse fractures. During the operation, the software generated drilling trajectories for robot navigation, and precise plate installation achieved automatic fracture reduction. RESULTS: The evaluation results of reduction accuracy revealed variations in length, apposition, alignment, and rotation that meet the criteria for anatomic reduction. High interoperator reliabilities were observed for all parameters. CONCLUSIONS: The proposed technology achieved anatomic reduction in simulated bones.

Assessing screw length impact on bone strain in proximal humerus fracture fixation via surrogate modelling.

A high failure rate is associated with fracture plates in proximal humerus fractures. The causes of failure remain unclear due to the complexity of the problem including the number and position of the screws, their length and orientation in the space. Finite element (FE) analysis has been used for the analysis of plating of proximal humeral fractures, but due to computational costs is unable to fully explore all potential screw combinations. Surrogate modelling is a viable solution, having the potential to significantly reduce the computational cost whilst requiring a moderate number of training sets. This study aimed to develop adaptive neural network (ANN)-based surrogate models to predict the strain in the humeral bone as a result of changing the length of the screws. The ANN models were trained using data from FE simulations of a single humerus, and after defining the best training sample size, multiple and single-output models were developed. The best performing ANN model was used to predict all the possible screw length configurations. The ANN predictions were compared with the FE results of unseen data, showing a good correlation (R2 = 0.99) and low levels of error (RMSE = 0.51%-1.83% strain). The ANN predictions of all possible screw length configurations showed that the screw that provided the medial support was the most influential on the predicted strain. Overall, the ANN-based surrogate model accurately captured bone strains and has the potential to be used for more complex problems with a larger number of variables.

Anterolateral Dual Plate Fixation for Distal Metaphyseal-Diaphyseal Junction Fractures of the Humerus: Biomechanical Finite Element Analysis with Clinical Results.

Background: Distal metaphyseal-diaphyseal junction fractures of the humerus are a subset of injuries between humeral shaft fractures and distal intra-articular humerus fractures. A lack of space for distal fixation and the unique anatomy of concave curvature create difficulties during operative treatment. The closely lying radial nerve is another major concern. The aim of this study was to determine whether anterolateral dual plate fixation could be effective for a distal junctional fracture of the humerus both biomechanically and clinically. Methods: A right humerus 3-dimensional (3D) model was obtained based on plain radiographs and computed tomography data of patients. Two fractures, a spiral type and a spiral wedge type, were constructed. Three-dimensional models of locking compression plates and screws were constructed using materials provided by the manufacturer. The experiment was conducted by using COMSOL Multiphysics, a finite element analysis, solver, and simulation software package. For the clinical study, from July 2008 to March 2021, a total of 72 patients were included. Their medical records were retrospectively reviewed to obtain patient demographics, elbow range of motion, Disabilities of the Arm, Shoulder and Hand (DASH) scores, Mayo Elbow Performance Scores (MEPS), and hand grip strength. Results: No fracture fixation construct completely restored stiffness comparable to the intact model in torsion or compression. Combinations of the 7-hole and 5-hole plates and the 8-hole and 6-hole plates showed superior structural stiffness and stress than those with single lateral plates. At least 3 screws (6 cortices) should be inserted into the lateral plate to reduce the load effectively. For the anterior plate, it was sufficient to purchase only the near cortex. Regarding clinical results of the surgery, the range of motion showed satisfactory results in elbow flexion, elbow extension, and forearm rotation. The average DASH score was 4.3 and the average MEPS was 88.2. Conclusions: Anterolateral dual plate fixation was biomechanically superior to the single-plate method in the finite element analysis of a distal junctional fracture of the humerus model. Anterolateral dual plate fixation was also clinically effective in a large cohort of patients with distal junctional fractures of the humerus.

Effect of geometrical design variables on implantation configuration and fixation stiffness of titling bone anchors: A parametric finite element study.

The mechanical interaction of a tilting anchor and cancellous bones of various densities was simulated using finite element modeling. The model enjoyed a sophisticated representation of the bone, as an elasto-plastic material with large deformation capability. The anchor's tilting action during implantation phase, as well as its fixation stiffness during pull-out test, were predicted by the model and a parametric study was performed to investigate the effects of the anchor's distal width and corner fillet radius, on these measures. The model predictions were validated against the results of an experimental test on ovine humerus specimens. The model could reasonably reproduce the tilting action of the anchor during the implantation phase. Comparison of the model predictions with the experimental results revealed similar trends during both the implantation and the pull-out phases, but smaller displacement magnitudes (end points: 1.4 vs. 2.1 mm and 4.6 vs. 5.2 mm, respectively). The results of the parametric study indicated substantial increase in the fixation stiffness with increasing bone density. Reducing the distal width and increasing the fillet radius improved the anchor's implantation configuration and fixation stiffness in low-density bones. For high-density bone applications, however, a larger distal width was favored for improving the fixation stiffness.

Automatic bicipital groove identification in arthritic humeri for preoperative planning: A Random Forest Classifier approach.

The bicipital groove is an important anatomical feature of the proximal humerus that needs to be identified during surgical planning for procedures such as shoulder arthroplasty and proximal humeral fracture reconstruction. Current algorithms for automatic identification prove ineffective in arthritic humeri due to the presence of osteophytes, reducing their usefulness for total shoulder arthroplasty. Our methodology involves the use of a Random Forest Classifier (RFC) to automatically detect the bicipital groove on segmented computed tomography scans of humeri. We evaluated our model on two distinct test datasets: one comprising non-arthritic humeri and another with arthritic humeri characterized by significant osteophytes. Our model detected the bicipital groove with a mean absolute error of less than 1mm on arthritic humeri, demonstrating a significant improvement over the previous gold standard approach. Successful identification of the bicipital groove with a high degree of accuracy even in arthritic humeri was accomplished. This model is open source and included in the python package shoulder.

Comparison of reconstructive techniques for nonprimary malignancies in the proximal humerus.

BACKGROUND: Endoprostheses (EPC) are often utilized for reconstruction of the proximal humerus with either hemiarthroplasty (HA) or reverse arthroplasty (RA) constructs. RA constructs have improved outcomes in patients with primary lesions, but no studies have compared techniques in metastatic disease. The aim of this study is to compare functional outcomes and complications between HA and RA constructs in patients undergoing endoprosthetic reconstruction for proximal humerus metastases. METHODS: We retrospectively reviewed our institutional arthroplasty database to identify 66 (56% male; 38 HA and 28 RA) patients with a proximal humerus reconstruction for a non-primary malignancy. The majority (88%) presented with pathologic fracture, and the most common diagnosis was renal cell carcinoma (48%). RESULTSS: Patients with RA reconstructions had better postoperative forward elevation (74° vs. 32°, p < 0.01) and higher functional outcome scores. HA patients had more complications (odds ratio 13, p < 0.01), with instability being the most common complication. CONCLUSIONS: Patients with nonprimary malignancies of the proximal humerus had improved functional outcomes and fewer complications after undergoing reconstruction with a reverse EPC compared to a HA EPC. Preference for reverse EPC should be given in patients with good prognosis and ability to complete postoperative rehabilitation.

Novel Dual Bicolumnar Fibula Graft Reconstruction of Distal Humerus in Pediatric Patients After Massive Bone Resection: A Report of Two Cases.

CASE: We describe 2 case studies, involving a 10-year-old girl with an aneurysmal bone cyst and a 12-year-old adolescent boy with Ewing sarcoma. The patient with Ewing sarcoma was previously managed with wide surgical excision and fibular graft reconstruction and subsequently experienced significant graft resorption, hardware failure, and fracture 24 months after operation. A revision limb salvage attempt was undertaken. In both cases, fibular strut grafts were harvested and fixed with intramedullary k-wires to recreate the medial and lateral columns of the distal humeral triangle. CONCLUSION: The technique achieved complete osseous integration, structural support, and functional restoration of the elbow in both cases, with good functional outcomes.

Supracondylar ostectomy and shortening (S.O.S.) for distal humerus nonunions.

BACKGROUND: Many distal humerus nonunions are associated with bone loss, and rigid internal fixation is difficult to obtain, especially for low transcondylar nonunions and those with severe intra-articular comminution. The purpose of this study was to analyze the results of a strategy to address this challenge utilizing internal fixation using the Supracondylar Ostectomy + Shortening (S.O.S.) procedure for distal humerus nonunions. The goals of this procedure are to (1) optimize bony contact and compression through re-shaping the nonunited fragments at the supracondylar level with selective humeral metaphyseal shortening, (2) maximize fixation using parallel-plating, and (3) provide biologic and structural augmentation with bone graft. MATERIALS AND METHODS: Between 1995 and 2019, 28 distal humerus nonunions underwent internal fixation using the S.O.S. procedure at a single Institution. There were 14 males and 14 females with mean age of 47 (range 14-78) years at the time of the S.O.S procedure and an average of 1.7 prior surgeries. Medical records and radiographs were reviewed to determine rates of union, reoperations, complications, and Mayo Elbow Performance Scores (MEPS). Patients were also prospectively contacted to update their MEPS and gather additional information on complications and reoperations. Mean clinical exam follow-up was 17 months, mean clinical contact follow-up was 19 months, and mean radiographic follow-up was 32 months. RESULTS: Four patients did not have adequate follow-up to determine union. Of the remaining 24 elbows, 22 achieved union. Two elbows developed collapse of the articular surface and were converted to a total elbow arthroplasty. There were complications in 10 elbows: contracture (5), superficial infection (2), ulnar neuropathy (1), deep infection (1), and hematoma (1). Twelve elbows underwent reoperation: 4 for contracture release, 3 for hardware removal, 2 for total elbow arthroplasty, 1 for bone grafting, 1 for hematoma evacuation, and 1 for ulnar nerve neurolysis. Compared to preoperative data, there was a significant improvement in postoperative flexion, extension and pronation (P < .01). The mean range of motion was 21° of extension, 119° of flexion, 79° of pronation, and 77° of supination. The mean MEPS was 80 points (range, 25-100 points) and 19 elbows (76%) rated as excellent or good. DISCUSSION: Stable fixation and high union rates are possible in distal humerus nonunions with bone loss using a technique that combines supracondylar humeral shortening, parallel plating, and bone grafting. Secondary procedures are commonly needed to restore function in this challenging patient population.

Postoperative Outcomes of Total Humerus Replacement for Oncologic Reconstruction of the Upper Limb: A Systematic Review of the Literature.

BACKGROUND: Total humerus replacement (THR) is a reconstruction procedure performed after resection of massive humeral tumors. However, there is limited literature on the rates of failure and functional outcomes of this implant. Our study aimed to determine the main failure modes, implant survival, and postoperative functional outcomes of THR. METHODS: A comprehensive search of the PubMed and Embase databases was conducted. We registered our study on PROSPERO (448684) and used the Strengthening the Reporting of Observational Studies in Epidemiology checklist for quality assessment. The Henderson classification was used to assess endoprosthesis failure and the Musculoskeletal Tumor Society (MSTS) score for functional outcomes. Weighted means and standard deviations were calculated. RESULTS: Ten studies comprising 171 patients undergoing THR were finally included. The overall failure rate was 32.2%. Tumor progression (12.6%) and prosthetic infections (9.4%) were the most common failure modes, followed by soft-tissue failures (5.9%), aseptic loosening (3.5%), and structural failure (1.8%). Two-year, 5-year, and 10-year implant survival rates for the entire cohort were 86%, 81%, and 69.3%. Ten-year implant survival for primary THRs was 78.3%, compared with 38.6% for revision THRs (p = 0.049). The mean MSTS score at the last follow-up was 77%. Patients whose implants did not fail had a higher MSTS score (79.3%) than those with failed implants (71.4%) (p = 0.02). CONCLUSION: One-third of THR will fail, mostly due to tumor progression and prosthetic infection. Overall functional scores were acceptable, with MSTS scores displaying great hand and elbow function but limited shoulder function. LEVEL OF EVIDENCE: Level III. See Instructions for Authors for a complete description of levels of evidence.

Long-term functional and clinical outcome of combined targeted muscle reinnervation and osseointegration for functional bionic reconstruction in transhumeral amputees: a case series.

OBJECTIVE: To describe and evaluate the combination of osseointegration and nerve transfers in 3 transhumeral amputees. DESIGN: Case series. PATIENTS: Three male patients with a unilateral traumatic transhumeral amputation. METHODS: Patients received a combination of osseointegration and targeted muscle reinnervation surgery. Rehabilitation included graded weight training, range of motion exercises, biofeedback, table-top prosthesis training, and controlling the actual device. The impairment in daily life, health-related quality of life, and pain before and after the intervention was evaluated in these patients. Their shoulder range of motion, prosthesis embodiment, and function were documented at a 2- to 5-year follow-up. RESULTS: All 3 patients attended rehabilitation and used their myoelectric prosthesis on a daily basis. Two patients had full shoulder range of motion with the prosthesis, while the other patient had 55° of abduction and 45° of anteversion. They became more independent in their daily life activities after the intervention and incorporated their prosthesis into their body scheme to a high extent. CONCLUSION: These results indicate that patients can benefit from the combined procedure. However, the patients' perspective, risks of the surgical procedures, and the relatively long rehabilitation procedure need to be incorporated in the decision-making.

Total Humeral Endoprosthetic Reconstruction: A Systematic Review.

BACKGROUND: Total humeral endoprosthetic reconstruction (THER) is a rare reconstruction option for limb salvage surgery for large humeral neoplasms or bone destruction. MATERIALS AND METHODS: Because of the limited data and need for this procedure, we reviewed the literature surrounding THER and assessed functionality, complications, and revisions using the PubMed, Embase, Ovid, and Scopus databases. RESULTS: Among 29 articles and 175 patients, the most common indication was neoplasm (n=25, 86%), mean follow-up was 61.98 months (SD=55.25 months), and mean Musculoskeletal Tumor Society score was 73.64% (SD=10.69%). Reported complications included 26 (23%) revisions in 7 studies, 35 (36%) cases of shoulder instability in 7 studies, and 13 (13.54%) cases of deep infection in 4 studies. CONCLUSION: THER should be considered with a thorough knowledge of outcomes and potential complications to guide patient and clinician expectations. [Orthopedics. 2024;47(3):e106-e113.].

Humeral Component Version Has No Effect on Outcomes Following Reverse Total Shoulder Arthroplasty: A Prospective, Double-Blinded, Randomized Controlled Trial.

BACKGROUND: Controversy exists regarding the ideal humeral component version to optimize humeral rotation and patient outcomes in reverse total shoulder arthroplasty (rTSA). METHODS: Patients undergoing primary rTSA for rotator cuff tear arthropathy, a massive rotator cuff tear, or primary osteoarthritis with a rotator cuff tear were randomized to placement of the humeral component in neutral version or 30° of retroversion. Shoulder active range of motion and strength and visual analog scale (VAS) pain, American Shoulder and Elbow Surgeons (ASES), and Patient-Reported Outcomes Measurement Information System Global 10 (PROMIS-10) scores were collected up to 2 years postoperatively. The goal of the study was to determine whether humeral external rotation and internal rotation are affected by humeral component version following rTSA at 2 years postoperatively. RESULTS: Sixty-six patients were included in the analysis. The median follow-up was 26 months for the neutral and 27 months for the 30° retroversion group. No differences between the groups were observed with respect to the primary diagnosis, sex, age, body mass index, or American Society of Anesthesiologists (ASA) class. The 2 groups did not differ significantly in terms of improvement at 2 years in active shoulder abduction (p = 0.969), forward elevation (p = 1.000), internal rotation measured as the highest spinal level reached (p = 1.000), internal rotation with the arm abducted 90° (p = 0.451), external rotation (p = 0.362), or muscle strength in forward elevation (p = 1.000), abduction (p = 1.000), external rotation (p = 0.617), or internal rotation (p = 1.000). The 2 groups did not differ significantly in terms of improvement in postoperative ASES (p = 1.000), PROMIS-10 physical (p = 1.000), or VAS pain scores (p = 0.718) at the time of final follow-up. In the neutral version group, 1 patient underwent revision for instability and 1 for stiffness. One acromial stress fracture occurred in the 30° humeral retroversion group. Scapular notching was observed in 7 (21.2%) of the patients in neutral version group and 5 (15.2%) of the patients in the 30° retroversion group (p = 0.750). CONCLUSIONS: Securing the humeral component at neutral version or 30° of retroversion in rTSA resulted in similar active shoulder external rotation, internal rotation, forward elevation, abduction, and strength measurements, complication rates, and VAS pain, PROMIS-10 physical, and ASES scores at 2 years postoperatively. LEVEL OF EVIDENCE: Therapeutic Level I . See Instructions for Authors for a complete description of levels of evidence.

Does the proximal humeral bone quality influence alignment after reverse total shoulder arthroplasty with short humeral stems?

PURPOSE: When compared to standard-length humeral stem in reverse total shoulder arthroplasty (RTSA), short humeral stems in RTSA require good proximal humeral metaphyseal bone quality to gain proper and secure fixation during prosthetic implantation. Shorter humeral stems potentially carry more risk of misalignment than standard or long humeral stems. The hypothesis was that misalignment of the short humeral stems is influenced by regional bone quality. METHODS: RTSA with a short curved humeral stem with neck-shaft angle (NSA) default of 132.5° was reviewed. The study group included 35 cases at a mean age of 75.97 (± 6.23) years. Deltoid-tuberosity index (DTI) was measured to evaluate proximal humeral bone quality. The deltoid tuberosity index was measured at immediately above position of the upper end of the deltoid tuberosity. Stem alignment was given by the angle measured in degrees between the intramedullary humeral shaft axis and the axis of the humeral implant stem. RESULTS: The patient's mean DTI was 1.37 ± 0.16 (median, 1.32; range, 1.12-1.80). 22 patients had poor bone quality (DTI < 1.4), compared to 13 patients with acceptable bone quality (DTI > 1.4). After RTSA, ten humeral components (29%) were neutrally aligned, whereas 25 humeral components (71%) were misaligned. There was no correlation between misalignment and DTI (r = 0.117; p = 0.504). But there was a strong correlation between misalignment and the patient's own NSA (r = - 0.47; p = 0.004). The postoperative stem position and stem misalignment are not associated with functional outcomes (p > 0.05). CONCLUSION: The misalignment of the short curved humeral stem frequently occurs. Poor reginal humeral bone quality does not influence misalignment after RTSA with a short humeral stem. Postoperative stem alignment is associated with the patient's preoperative NSA and method of neck cut. The misalignment does not affect functional outcomes for midterm follow-up. Further long-term follow-up studies are needed to confirm its clinical relevance.