Exploring access cavity through non-carious cervical lesions: Impacts on instrumentation, obturation, and fracture resistance in mandibular incisors.

AIM: To compare the effects of Cervical Access Cavity (CervAC) and Traditional Access Cavity (TradAC) on root canal preparation, root canal filling, and fracture resistance in mandibular incisors. METHODOLOGY: Twenty recently extracted and intact mandibular incisors were initially scanned using a micro-CT device. The specimens were anatomically matched to create two groups (n = 10). A wedge-shaped non-carious cervical lesion (NCCL) was created on the buccal aspect of all teeth using a double-faced segmented diamond disc. In group 1, a TradAC was prepared, whilst in group 2, access was created through the simulated NCCL using a round diamond bur 1012. After root canal preparation with Rotate instruments sizes 15/0.04, 20/0.04, and 25/0.04, the teeth were scanned again and evaluated for root canal volume and surface area, static voxels, volume of removed dental tissue, and dentine thickness. After that, the root canals were filled using the single-cone technique, teeth were restored with composite resin, and subsequently rescanned to calculate the volume of filling materials and voids. Then, the restored teeth were subjected to fracture resistance tests using a universal testing machine. Statistical comparisons between groups were performed with the Mann-Whitney test or the Student's t-test, with a statistical significance level of 5%. RESULTS: Statistical comparisons indicated no significant differences between groups in terms of root canal volume, surface area, static voxels, removed root dentine, root canal filling volume, percentage of voids, or fracture resistance load (p > .05). Conversely, teeth prepared with TradAC showed a significantly higher percentage of dental tissue removed from the crown (p = .001) and a greater volume of filling material remnants in the pulp chamber (p < .001) compared to the CervAC group. A significantly lower percentage reduction in dentine thickness was observed only on the mesial aspect of root at Level 1 in TradAC group (p = .008). CONCLUSIONS: CervAC can be considered a viable alternative approach in the presence of NCCL in mandibular incisors.

Radiographic evaluation of enamel thickness of permanent teeth: relevance and applicability.

OBJECTIVE: This descriptive observational study aimed to determine clinically relevant and applicable data of enamel thickness (ETH), considering the mesio-distal differences of anterior and posterior permanent teeth and their relationships. MATERIAL AND METHODS: The sample consisted of right-sided standardized radiographs of 34 individuals (21 females and 13 males), aged between 13 and 24 (average 16) years, with all permanent teeth intact and without crowding. Four periapical and four interproximal radiographs were obtained and digitized. ETH measurements (mesial to distal contact points at the dentin-enamel junction) were performed after correction for radiographic image magnification. The Students' t-test was applied to the differences between paired means, with the Pearson correlation to evaluate the correlation between them. RESULTS: The mesial and distal ETH increased from the anterior to the posterior teeth. Incisor ETH ranged between 0.60 and 0.84 mm. Canines, premolars, and molars were more than 1.0 mm thick, and molar enamel reached values between 1.26 and 1.44 mm. CONCLUSION: Distal ETH was significantly greater than the mesial ETH, and progressively thicker from the anterior to posterior teeth. Interproximal reduction (IPR) of the lower central and upper lateral incisors should be avoided, reduced, or performed on their distal surfaces. There is a positive and significant correlation between ETH and the mesial and distal surfaces of the teeth. Periapical radiographs and evaluation of the remaining ETH are necessary in cases of retreatment. The location and number of tooth size discrepancies should be considered in treatment planning and appropriately compensated with IPR.

Effect of the filling technique on the filling removal from oval-shaped canals.

OBJECTIVES: This ex vivo study aimed to evaluate the influence of different filling techniques on the filling removal from oval root canals filled with bioceramic sealer. METHODS: Thirty-six mandibular incisors with single oval canals were filled with bioceramic sealer following the techniques (n = 12): single-cone, modified McSpadden, or continuous wave of condensation, and scanned by micro-computed tomography (micro-CT). The filling was removed using the Clearsonic ultrasound tip and Reciproc system up to the R40 instrument, and the working time was recorded. The teeth were scanned again by micro-CT. Percentage of remnant volume (mm³) of the filling material, dentin thickness, and root canal transportation were measured. The data was analyzed using parametric and non-parametric tests with a significance level of 5%. RESULTS: It took more time to remove the filling material using the continuous wave of condensation technique (p < 0.05), followed by the modified McSpadden and single-cone techniques. There was no difference (p > 0.05) when comparing the percentage of remaining filling material among the three groups, nor did it among the segments of each tooth. There was also no difference in the analysis of dentin thickness and transportation when comparing the groups (p > 0.05). CONCLUSIONS: The filling technique did not influence the amount of remaining filling material, dentin thickness, and transportation. The working time was longer with thermoplastic filling techniques. CLINICAL RELEVANCE: Endodontic retreatment in teeth filled with bioceramic sealers increases with their use. Several techniques are used to fill the root canals, thus, it is important to know whether the filling technique influences the non-surgical endodontic retreatment.

Biomechanical impact of labiolingual diameter on endodontically treated anterior teeth with crown restoration under occlusal loading.

OBJECTIVE: To evaluate the effect of the labiolingual diameter and construction of an endodontically treated (ET) anterior tooth with crown restoration on stress distribution and biomechanical safety under occlusal loading. METHODOLOGY: Three-dimensional finite element models were generated for maxillary central incisors with all-ceramic crown restorations. The labiolingual diameters of the tooth, defined as the horizontal distance between the protrusion of the labial and lingual surfaces, were changed as follows: (D1) 6.85 mm, (D2) 6.35 mm, and (D3) 5.85 mm. The model was constructed as follows: (S0) vital pulp tooth; (S1) ET tooth; (S2) ET tooth with a 2 mm ferrule, restored with a fiber post and composite resin core; (S3) ET tooth without a ferrule, restored with a fiber post and composite resin core. A total of 12 models were developed. In total, two force loads (100 N) were applied to the crown's incisal edge and palatal surface at a 45° oblique angle to the longitudinal axis of the teeth. The Von Mises stress distribution and maximum stress of the models were analyzed. RESULTS: Regardless of the loading location, stress concentration and maximum stress (34.07~66.78MPa) in all models occurred in the labial cervical 1/3 of each root. Both labiolingual diameter and construction influenced the maximum stress of the residual tooth tissue, with the impact of the labiolingual diameter being greater. A reduction in labiolingual diameter led to increased maximum stress throughout the tooth. The ferrule reduced the maximum stress of the core of S2 models (7.15~10.69 MPa), which is lower compared with that of S3 models (19.45~43.67 MPa). CONCLUSION: The labiolingual diameter exerts a greater impact on the biomechanical characteristics of ET anterior teeth with crown restoration, surpassing the influence of the construction. The ferrule can reduce the maximum stress of the core and maintain the uniformity of stress distribution.

Integrated correlation analysis of the thickness of buccal bone and gingiva of maxillary incisors.

OBJECTIVE: This study aimed to validate the integrated correlation between the buccal bone and gingival thickness of the anterior maxilla, and to gain insight into the reference plane selection when measuring these two tissues before treatment with implants. METHODOLOGY: Cone beam computed tomography (CBCT) and model scans of 350 human subjects were registered in the coDiagnostiX software to obtain sagittal maxillary incisor sections. The buccal bone thickness was measured at the coronal (2, 4, and 6 mm apical to the cementoenamel junction [CEJ]) and apical (0, 2, and 4 mm coronal to the apex plane) regions. The buccal gingival thickness was measured at the supra-CEJ (0, 1mm coronal to the CEJ) and sub-CEJ regions (1, 2, 4, and 6 mm apical to the CEJ). Canonical correlation analysis was performed for intergroup correlation analysis and investigation of key parameters. RESULTS: The mean thicknesses of the buccal bone and gingiva at different levels were 0.64~1.88 mm and 0.66~1.37 mm, respectively. There was a strong intergroup canonical correlation between the thickness of the buccal bone and that of the gingiva (r=0.837). The thickness of the buccal bone and gingiva at 2 mm apical to the CEJ are the most important indices with the highest canonical correlation coefficient and loadings. The most and least prevalent subgroups were the thin bone and thick gingiva group (accounting for 47.6%) and the thick bone and thick gingiva group (accounting for 8.6%). CONCLUSION: Within the limitations of this retrospective study, the thickness of the buccal bone is significantly correlated with that of the buccal gingiva, and the 2 mm region apical to the CEJ is a vital plane for quantifying the thickness of these two tissues.

The efficiency of a customized distalizer with Variety SP® screws anchored on palatal miniscrews for upper molar distalization.

OBJECTIVE: To assess the effectiveness of a customized distalizer with Variety SP® screws anchored on palatal miniscrews for upper molar distalization. METHODS: Seventeen patients aged between 12.5 and 24 years underwent distalization with a customized distalizer. Lateral cephalogram and cast analysis were performed before and after distalization. Linear and angular parameters of the upper first molar, first premolar, and central incisor were assessed. RESULTS: Distalization with the force passing near the center of resistance (CRes) of the upper first molars resulted in distal movement, with minimal distal tipping (2.8 ±â€Š0.45°, p< 0.05). However, distalization passing occlusal to the CRes led to greater distal tipping (13.6 ±â€Š1.63°, p< 0.05). Statistically significant spontaneous distal tipping and distal movement of the upper first premolars occurred, with a mean of 6.2 ±â€Š1.24° (p< 0.05) and 0.68 ±â€Š0.34 mm (p< 0.05), respectively. The positional change of the upper central incisors presented a mean of -0.23 ±â€Š0.1 mm (p> 0.05) and 2.65 ±â€Š1.1° (p< 0.05). Upper first molar intrusion was statistically significant, with a mean of 0.88 ±â€Š0.2 mm (p< 0.05). Upper right and left first molars rotation towards palatal midline presented mean of 4.1 ±â€Š0.19° (p< 0.05) and 3.4  ±â€Š0.1° (p< 0.05), respectively. Additionally, the distance between upper right and left first molars increased significantly, with a mean of 2.54 ±â€Š0.01 mm (p< 0.05). CONCLUSION: The study successfully demonstrated the efficiency of molar distalization without anchorage loss using a customized distalizer anchored on palatal miniscrews.

Measurement of the mandibular canal and mandibular incisive canal using cone beam tomography in adults from South Brazil.

PURPOSE: To identify and measure the distance from the dental apices to the mandibular (MC) and mandibular incisive (MIC) canals, the diameter of the MC and the distances of the mental foramen (MF). METHODS: In this retrospective study, cone-beam computed tomography scans of 144 adult patients (males and females) from a dental school in South Brazil were evaluated. Cross-sections were selected on the MC and the MIC paths, perpendicular to the mandibular base, and measurements were taken from the dental apices to the mandibular cortices. The measurement and location of the mandibular and mental foramen on both sides were compared. Paired t-tests compared sides, while Student's t-tests compared sexes (P < 0.05). RESULTS: The distance from the dental apices to the upper wall of the MC was closest in the third molar and farthest in the central incisor region. In both sexes and sides, the path of the MC is in most cases lingually in the molar regions and moves to the buccal region from the second premolar. The MF emerges in the regions between the premolars or near the second premolar. CONCLUSION: The results of this study highlight the importance of evaluating specific individual characteristics of a given population.

Ultrasonic activation of adhesive systems increases bond strength and intratubular penetration of resin cement in root dentin subjected to radiation therapy.

OBJECTIVE: This study aimed to evaluate the effect of ultrasonic activation of etch-and-rinse and self-etch adhesive systems on the bond strength of resin cement to irradiated root dentin. MATERIALS AND METHODS: Eighty human maxillary anterior teeth were distributed into 8 groups (n = 10), according to the type of adhesive system used (etch-and-rinse and self-etch), the ultrasonic activation of the adhesive systems, and the dentin condition (irradiated or non-irradiated - 70 Gy). Endodontic treatment was performed followed by fiberglass post-space preparation. After fiberglass posts' luting, the roots were transversely sectioned on dentin discs and submitted to the push-out bond strength test (0.5 mm/min). The fractured specimens were analyzed under a stereomicroscope and Scanning Electron Microscope (SEM) for failure mode classification. One of the dentin discs was analyzed under SEM to evaluate the characteristics of the adhesive interface. RESULTS: Irradiated specimens had lower bond strength than non-irradiated specimens (P < 0.0001). Ultrasonic activation of both adhesive systems increased the bond strength of the resin cement to irradiated dentin (P < 0.0001). Radiotherapy significantly affected the failure mode in the middle (P = 0.024) and apical thirds (P = 0.032) (adhesive failure). CONCLUSION: Non-irradiated specimens had a more homogeneous adhesive interface. When ultrasonically activated, both adhesive systems showed a greater number of resinous tags, regardless of the dentin condition. CLINICAL RELEVANCE: Ultrasonic activation of adhesive systems is a feasible strategy to enhance fiberglass posts retention in oncological patients.

Traumatic dental injuries and molar incisor hypomineralization: a cross-sectional study of schoolchildren from southern Brazil.

PURPOSE: To describe the prevalence and the variables associated with TDIs in schoolchildren aged 8 to 14 years in Estância Velha city in southern Brazil, placing emphasis on molar incisor hypomineralization. METHODS: Students enrolled in public schools of a medium-sized city in the southern Brazil were selected using cluster random sampling. Clinical examinations assessed molar incisor hypomineralization-MIH (European Academy of Pediatric Dentistry criteria), dental caries (DMFT index), and TDIs (O'Brien's criteria). Socioeconomic and demographic variables were assessed using a standardized questionnaire. Prevalence ratios were estimated using Poisson regression (p < 0.05). RESULTS: 513 students (54.8% female), with a mean age of 11.6 (± 1.9) years, participated in the study. The prevalence of TDIs was 11.3%, with enamel fracture representing 90.4%. The high prevalence of traumatic dental injuries was associated with MIH (PR: 2.22 CI: 1.27; 3.87; p < 0.01) and overjet > 3 mm (PR: 2.03 CI 1.19; 3.45; p < 0.01). CONCLUSION: The sample of schoolchildren from southern Brazil had a low prevalence of traumatic dental injuries. Molar incisor hypomineralization and increased overjet were associated with the higher prevalence of traumatic dental injuries.

Analysis of morphology and symmetry of the root canal system of incisors, premolars and mandibular molars using CBCT.

Knowledge of root canal internal anatomy and its variations is important forproper endodontic treatment. It is therefore necessary to investigate morphological aspects among different dental groups in the same patient to define the best protocol for the case. AIM: To evaluate the morphology and symmetry of homologous incisors, premolars and mandibular molars using cone beam computed tomography (CBCT). MATERIALS AND METHOD: Descriptive statistical analysis was performed for the frequency of categorical variables, and a chi-square test or Fisher 's exact test was used to test whether gender and side were associated with number of roots, number of canals, and Vertucci's classification. Forty-five CBCT scans were evaluated, and 444 mandibular teeth were analyzed. The number of roots, number of canals, classification of the canals in each root according to Vertucci and presence of a symmetrical relationship between pairs of posterior teeth were analyzed. RESULTS: The resuls showed that 74% of mandibular central incisors had type I root canal, 26% of mandibular lateral incisors had type I and, with a significant difference in the number of canals between males and females (p < 0.05). In mandibular first premolars, 70.5% had type I; and in mandibular second premolars, 98.5% had type I. Mandibular first molars had two roots in 98% of the cases. Second mandibular molars had two roots in 92.5% of the cases, one root in 6%, and three roots in 1.5%. Symmetry between central incisors was higher in females than in males. CONCLUSIÓN: Teeth of the same group can have different morphologies in the same patient.

0 conhecimento da anatomia interna e suas variagoes anatómicas é fator importante para o adequado tratamento endodóntico. Portanto, é necessário investigar esses aspectos morfológicos entre diferentes grupos dentários de um mesmo paciente para definir o melhor protocolo para o caso. OBJETIVO: Avaliar a morfologia e simetria de incisivos, pré-molares e molares inferiores homólogos por meio de tomografia computadorizada de feixe cónico (TCFC). MATERIAIS E MÉTODO: Foi realizada análise estatística descri-tiva para a frequéncia das variáveis categóricas e foi utilizado o teste do qui-quadrado ou teste exato de Fisher para testar a relagao entre sexo e lado em comparagao com número de raízes, número de canais e classificagao de Vertucci. Quarenta e cinco TCFC foram avaliadas e 444 dentes inferiores foram analisados. Foram considerados: o número de raízes, o número de canais, o tipo dos canais acordo com a classificagao de Vertucci e a presenga de relagao simétrica entre pares de dentes posteriores. RESULTADOS: Os resultados mostraram que 74% dos incisivos centrais inferiores tinham um canal radicular tipo 1 e 26% tinham dois canais; 73% dos incisivos laterais inferiores, 26%oeram do tipo I, tinham um canal e 27% tinham dois canais, com diferenga significativa no número de canais entre os grupos masculino e feminino (p < 0,05). Nos primeiros pré-molares inferiores, tipo I, um canal foi detectado em 70,5% e dois canais em 29,5%; nos segundos pré-molares inferiores, tipo I, um único canal foi detectado em 98,5%. O primeiro molar inferior foi observado com duas raízes em 98% e tres raízes em 2%o. O segundo molar inferior tinha duas raízes em 92,5% dos casos, uma raiz em 6% e tres raízes em 1,5%. A simetria foi maior nas mulheres em comparagao aos homens nos incisivos centrais. CONCLUSÃO: Pode-se concluir que dentes de um mesmo grupo podem apresentar morfologias diferentes no mesmo paciente.

Root Regeneration with Photobiomodulation of an Upper Lateral Incisor Associated with Root Resorption Due to an Impacted Maxillary Canine: A Case Report.

Objective: To present a case report of maxillary lateral incisor root regeneration after severe root resorption, treated with photobiomodulation (PBM). Background: Impacted maxillary canines often come with the risk of maxillary lateral incisor root resorption, which is widely recognized as the predominant adverse effect in these situations. This progressive process of root resorption is currently irreversible, with no known way to reverse it. Materials and methods: A male patient was 14 years old. Radiographically it was observed that canine 23 is impacting against the root of 22 producing signs of root resorption and having a less than 1:1 crown-to-root ratio with mobility grade 1. From the beginning of the treatment, PBM-assisted orthodontics was proposed. To address the patient's dental concerns, the treatment plan outlined the extraction of the deciduous upper left canine tooth leaving the lateral as long as possible in the mouth. During each appointment, PBM was applied with a diode laser. The wavelength was 810 nm, Ap = 0.2 W, 4.4 J, 22 sec every 21 days, 13 applications in total (57.2J), with a 400 µm inactive surgical tip, in a scanning movement, 1 mm from the mucosa while moving following the vestibular surface of the upper left lateral and canine roots. Results: After 12 months, the 22 had root neoformation and complete closure of the apex with vitality. Conclusions: PBM with an 810 nm diode laser in this clinical case promoted root regeneration of an upper lateral incisor, with severe root resorption, owing to an impacted maxillary canine while still vital.

Dental implant and abutment in PEEK: stress assessment in single crown retainers on anterior region.

OBJECTIVE: Stress distribution assessment by finite elements analysis in poly(etheretherketone) (PEEK) implant and abutment as retainers of single crowns in the anterior region. MATERIALS AND METHODS: Five 3D models were created, varying implant/abutment manufacturing materials: titanium (Ti), zirconia (Zr), pure PEEK (PEEKp), carbon fiber-reinforced PEEK (PEEKc), glass fiber-reinforced PEEK (PEEKg). A 50 N load was applied 30o off-axis at the incisal edge of the upper central incisor. The Von Mises stress (σvM) was evaluated on abutment, implant/screw, and minimum principal stress (σmin) and maximum shear stress (τmax) for cortical and cancellous bone. RESULTS: The abutment σvM lowest stress was observed in PEEKp group, being 70% lower than Ti and 74% than Zr. On the implant, PEEKp reduced 68% compared to Ti and a 71% to Zr. In the abutment screws, an increase of at least 33% was found in PEEKc compared to Ti, and of at least 81% to Zr. For cortical bone, the highest τmax values were in the PEEKp group, and a slight increase in stress was observed compared to all PEEK groups with Ti and Zr. For σmin, the highest stress was found in the PEEKc. Stress increased at least 7% in cancellous bone for all PEEK groups. CONCLUSION: Abutments and implants made by PEEKc concentrate less σvM stress, transmitting greater stress to the cortical and medullary bone. CLINICAL RELEVANCE: The best stress distribution in PEEKc components may contribute to decreased stress shielding; in vitro and in vivo research is recommended to investigate this.

Digital Photocolorimetric Analysis of In Vitro Tooth Color Changes.

OBJECTIVE: Tooth color matching is challenging, and digital photocolorimetry using eLABor_aid (eLAB) provides objective evaluation through polarized photographs. However, its comparability with spectrophotometry remains unclear. METHODS AND MATERIALS: Bovine incisor root canals (n=30) were prepared to simulate an incomplete root apex. The teeth were randomly assigned to three groups based on intracanal medication: control (without medication); calcium hydroxide/propylene glycol; and triple-antibiotic paste (n=10 each). Tooth color was assessed using both eLAB and spectrophotometry. Measurements were taken at the crown medio-cervical region on five-time intervals (baseline, 1, 3, 7, and 14 days). Statistical analysis included two-way repeated-measures ANOVA, Sidak post hoc and Pearson's correlation test (α=0.05). RESULTS: No significant differences were observed between the two methods for either medication or follow-ups (p>0.05). Triple-antibiotic paste exhibited higher color variation (p<0.05). After 7 days, all groups presented significant color changes (p<0.05). Moderate to high correlations (R2 from 0.51 to 0.84, p<0.0001) were found between both methods for all groups at all intervals. CONCLUSION: The eLAB is a reliable method for detecting tooth color changes, and its results are comparable to spectrophotometry analysis.

Effects of increasing instrument size and taper on the disinfection and shaping of mandibular incisors.

This study assessed canal preparation effects on disinfection and dentin preservation. Thirty mandibular incisors were paired into two experimental groups (n = 10). Following contamination, the initial microbial sample was collected. Instruments 30/0.03 (Group 1) and 30/0.05 (Group 2) were employed and a second sample was obtained. Canals were enlarged using instruments 40/0.03 and 40/0.05, respectively, and a third sample was collected. Final irrigation was performed, and sample S4 obtained. A final scan evaluated volume, surface area, unprepared areas, removed dentin and dentin thickness. Data were analysed using Student t-test, Mann-Whitney, Kruskal-Wallis and Dunn tests. A significant difference was observed between S1 and other time points (p < 0.05). Comparison between groups showed no differences in bacterial loads and in the percentage of microbial reduction (p > 0.05). Group 2 exhibited greater reduction in dentin thickness than group 1 in the mesial aspect of the root (p < 0.05). Instrument 30/0.03 might provide effective disinfection and safety during mandibular incisors canal preparation.

Accuracy of Invisalign® aligners in adult patients: a retrospective study of angular tooth movements.

OBJECTIVE: This retrospective study aimed to assess the predictability of Invisalign® aligners regarding rotational, mesio-distal and buccal-lingual tip movements. METHODS: Two materials were included in the analysis - EX30, used until 2013; and SmartTrack, in current use. The study comprised 56 adult patients treated with Invisalign Comprehensive. Data sample were assessed on three sets of digital models; model 1 - initial, model 2 - predicted, and model 3 - achieved. Sixty reference points were marked in each dental arch, and two reference planes assisted the superimposition. The degree of rotation, mesio-distal and buccal-lingual tip was obtained via trigonometric calculations, through a previously published validated method. The accuracy of outcomes was compared according to the types of tooth movement and teeth groups,and the influence of predetermined variables on movement accuracy was also investigated. RESULTS: Rotation and mesio-distal tip did not present any significant difference when comparing EX30 and SmartTrack groups. Only buccal-lingual tip presented a significant difference, incisor and canine groups treated with EX30 aligners presented an increase in accuracy (p= 0.007 and p = 0.007, respectively). For each additional degree planned for rotation movements, there was an increase of 0.35° in the discrepancy, and an increase of 0.40° and 0.41° for mesio-distal and buccal-lingual tip, respectively. EX30 and SmartTrack discrepancies were compared by multilevel linear regression. CONCLUSION: EX30 aligners reached higher accuracy for buccal-lingual tip in anterior teeth. However, for rotation and mesio-distal tip, SmartTrack and EX30 are similarly accurate. The total amount of planned movement has a significant impact on accuracy rates, with a decrease in accuracy for every additional degree.

Stress distribution on teeth restored with veneers using various incisal preparation designs: A 3D finite element analysis study.

STATEMENT OF PROBLEM: The type of veneer preparation is often chosen according to the patient's tooth structure and occlusion. Taking biomechanics into account in this decision-making process provides the clinician with more technical information on how to improve the clinical longevity of restorations. However, biomechanical analyses of veneer preparation designs are sparse. PURPOSE: The purpose of this 3-dimensional (3D) finite element analysis with microcomputed tomography (µCT) data obtained from realistic models was to assess the influence of different preparations for ceramic and composite resin veneers on restoration and resin layer stress distribution. MATERIAL AND METHODS: Four replicas of a central incisor were printed and prepared for laminate veneers with 4 different incisal edge designs: shoulder (SH), palatal chamfer (PC), palatal chamfer and oblique fracture involving the distal angle (OF-PC), and palatal chamfer involving horizontal incisal fracture (IF-PC). After fabrication and cementation of the veneers, the restored replicas were assessed with µCT, and 3D finite element models were built. A 100-N load was applied on the palatal surface at 60 and 125 degrees relative to the longitudinal axis. Maximum principal stress and stress distribution on the veneers, cement layer, and tooth structure were calculated and analyzed. RESULTS: The SH preparation exhibited better stress distribution than the PC preparation, and the cement layer and the veneer were subjected to lower stress. The IF-PC preparation had better stress distribution than the OF-PC. The shoulder and IF-PC showed higher stress on laminate veneers, but lower stress on the cement layer. Ceramic veneers exhibited lower stress than composite resin veneers. CONCLUSIONS: The different incisal preparations for laminate veneers influenced stress distribution on restorations and on the resin cement layer. The shoulder type preparation showed better stress distribution and the composite resin veneers showed unfavorable results compared with the ceramic veneers.

Late Eruption of Mandibular Central Incisor in Small for-Gestational-Age Infants: A Cohort Study.

Purpose: To evaluate the chronology of the eruption of primary mandibular central incisors in infants born preterm and with low weight (PLBW) and its association with weight/length ratio for gestational age (GA) at birth, individual characteristics and hospitalization at birth. Methods: A cohort of 46 infants was followed at a multidisciplinary reference center at a university hospital in Belo Horizonte, Brazil. The inclusion criteria were infants born preterm with low/very low/extreme low birth weight and at least four months of age. Oral clinical examinations were carried out by a calibrated dentist for a total of eight months, with a one-month interval between each examination, to verify the chrono- logy of eruption of the primary mandibular central incisors. Caregivers completed a sociodemographic and health questionnaire. Data on neonatal hospitalization were collected from medical records. Data were analyzed with the Kaplan-Meier method and log rank test, and bivariate analysis was done using the Mann-Whitney method and Kruskal-Wallis test (P <0.05). Results: The average age at eruption of primary lower central incisors was 11 months for both sexes. No association was found between tooth eruption and child hospitalization or individual characteristics (P >0.05). Infants large for gestational age had earlier tooth eruption (9.3±1.41 months) than infants small for gestational age (13.6±3.29 months; P <0.05).Conclusion: The most likely age for the eruption of the first primary teeth in infants born preterm and with low weight was 11 months, and there was no influence of individual characteristics and hospitalization at birth. Small-for-gestational age infants experienced delayed tooth eruption compared to large-for-GA infants.

Impacto de la agenesia de incisivos laterales maxilares en la oclusión: revisión bibliográfica / Impact of maxillary lateral incisors agenesis on occlusion: bibliographic review

Objetivo: describir el impacto de la agenesia no sindrómica de incisivos laterales maxilares permanentes en la oclusión. Material y método: se realizó una búsqueda de la evidencia disponible de manera electrónica en las bases de datos PubMed, Cochrane Library, EBSCOhost, SciELO y Epistemonikos, con filtro de búsqueda de artículos publicados entre los años 2005 y 2022, y con disponibilidad de texto completo. Resultados: se seleccionaron 9 estudios publicados entre los años 2010 y 2021; 3 estudios genéticos, 4 estudios transversales y 2 revisiones sistemáticas. Conclusión: la agenesia no sindrómica de incisivos laterales maxilares permanentes se relaciona con alteraciones esqueléticas y dentales que inciden en la oclusión dental. Un diagnóstico temprano y un tratamiento oportuno, según las necesidades de cada paciente, son importantes por las repercusiones funcionales y estéticas que genera esta alteración.

Objective: to describe the impact of non-syndromic agenesis of permanent maxillary lateral incisors on occlusion. Material and method: a search of the electronically available evidence was carried out in the PubMed, Cochrane Library, EBSCOhost, SciELO and Epistemonikos databases, with a search filter for articles published between 2005 and 2022, and with full text availability. Results: 9 studies were selected, published between 2010 and 2021: 3 genetic studies, 4 cross-sectional studies and 2 systematic reviews. Conclusion: Non-syndromic agenesis of permanent maxillary lateral incisors is related to skeletal and dental abnormalities that affect dental occlusion. Because of the functional and aesthetic repercussions of this alteration, early diagnosis and timely treatment, according to the needs of each patient, are essential.

Spectrophotometric Analysis of Apical Extrusion of Sodium Hypochlorite using Different Irrigation Protocols in an Ex Vivo Model of Immature Teeth.

OBJECTIVE: To evaluate the effect of different agitation methods on apical extrusion of 1.5% sodium hypochlorite (NaOCl) in an ex vivo model of immature teeth. METHODS: Sixty extracted human inferior incisors were prepared to simulate immature teeth and embedded in an artificial root socket made of silicone impression material. The teeth were then divided into four groups: Conventional needle irrigation (CNI) alone, CNI supplemented with Ultrasonic Irrigant Activation (UIA), EasyClean (EC), or XP-endo Finisher (XPF). Extruded NaOCl was collected, reacted with m-cresol purple, and its absorbance values were measured. The data were statistically analyzed using One-way analysis of variance with a significance level of 5%. RESULTS: All groups showed apically extruded irrigating solution, and the mean volumes of extruded NaOCl did not differ significantly between any of the test groups (p⟩0.05). CONCLUSION: The activation of 1.5% NaOCL by UIA, EC, or XPF as supplementary to CNI does not promote greater apical extrusion when compared to CNI alone in simulated immature teeth.

Optical coherence tomography and gray scale digital analysis as noninvasive techniques for evaluating molar-incisor hypomineralization severity: A comparative study with microcomputed tomography.

Molar-incisor hypomineralization (MIH) is a qualitative defect of dental enamel characterized by demarcated opacities present in permanent first molars and other teeth. It is considered a major clinical challenge in dentistry because it makes affected teeth more susceptible to fractures and dental caries. Its diagnosis is mainly clinical and there are few technological resources that allow for a more accurate diagnosis, especially with respect to the depth of the defect in the dental enamel. In this context, optical coherence tomography (OCT), which is routinely used in ophthalmology, can produce images of the depth of the dental enamel, making it a promising method. In this study, 33 teeth with different MIH severities were evaluated using OCT and microcomputed tomography (microCT). Semi-quantitative methods of grayscale pattern analysis were used to compare images obtained from different severities of MIH with the mineral density obtained through microCT. MicroCT evaluation revealed that hypomineralized enamel had a significantly lower mineral density than intact enamel. However, this difference was not observed between the mild and severe MIH lesions. In the OCT evaluation, significant differences were observed between the intact and hypomineralized enamel, and the gray value comparison provided a method for quantitative differentiation between the two. This study suggests that OCT could be a useful adjunct to traditional diagnostic methods for MIH, offering a noninvasive approach to evaluate enamel defects. RESEARCH HIGHLIGHTS: Combining optical coherence tomography with grayscale digital analysis shows potential as a promising method for diagnosing molar-incisor hypomineralization and assessing its level of severity.