Laser therapy for genitourinary syndrome of menopause: systematic review and meta-analysis of randomized controlled trial.

Objective: This meta-analysis of randomized controlled trials (RCTs) aimed to update evidence on the effectiveness and safety of laser therapy for treating genitourinary syndrome of menopause (GSM). Data sources: Manuscripts published until May 2023 were systematically searched in PubMed; Embase; Scopus; Web of Science; CENTRAL; CINAHL; and clinical trial databases (www.trialscentral.org, www.controlled-trials.com, and clinicaltrials.gov), with no language and year of publication restriction. Studies selection: RCTs with women diagnosed with GSM, and the intervention was vaginal laser therapy (CO2-laser or Er: YAG-laser) comparing with placebo (sham therapy), no treatment or vaginal estrogen therapy. Data collection: Two authors evaluated the publications for inclusion based on the title and abstract, followed by reviewing the relevant full-text articles. Disagreements during the review process were addressed by consensus, with the involvement of a third author. Data synthesis: Twelve RCTs, representing a total of 5147 participants, were included in this review. Vaginal health index (VHI) significantly improved in the carbon dioxide laser (CO2-laser) therapy group (MD=2.21; 95% CI=1.25 to 3.16), while dyspareunia (MD=-0.85; 95% CI=-1.59 to -0.10), dryness (MD=-0.62; 95% CI=-1.12 to -0.12) and burning (MD= -0.64; 95% CI=-1.28 to -0.01) decreased. No serious adverse effects were reported. Conclusion: CO2-laser increases VHI score and decreases dyspareunia, dryness and burning, especially when compared to sham-laser. However, the certainty of the evidence is low, thus preventing the recommendation of laser therapy for GSM management.

In Vivo Evaluation of Laser-Induced Optical Breakdown (LIOBS) by 1064-nm Nd:YAG Fractional Picosecond Laser With Reflectance Confocal Microscopy and Precise Histopathologic Correlation.

OBJECTIVES: Picosecond lasers with a microlens array can cause laser-induced optical breakdown (LIOBS) and LIC (Intradermal laser-induced cavitation) within high-fluence areas. This study aimed to describe the clinical, reflectance confocal microscopy (RCM), histopathological findings, and the characteristics of vacuoles caused by LIOBS and LIC in individuals with skin types III and IV. MATERIALS AND METHODS: This study was performed on six Chilean healthy volunteers, males and females, aged 35-65 years old with Fitzpatrick skin phototypes III-IV. The laser was applied in the inner proximal area of the nondominant arm. RCM evaluation was performed 24 h later; 48 h later, skin biopsies were performed on the laser-treated areas. Clinical, histological, and RCM findings were recorded. RESULTS: Every individual developed a 10 mm2 area of clinical erythema in the treated area. Under RCM, all six volunteers had hyporeflective spherical structures at the level of the epidermis, consistent with intraepidermal vacuoles. Histopathological evaluation revealed different sizes of vacuoles in both the epidermis and dermis. CONCLUSION: The LIOBS and LIC processes and the secondary production of vacuoles could be highly valuable for effective dermal remodeling treatment and aid in promoting the production of new collagen, elastic fibers, and growth factors that could improve skin texture. These structures were visible under RCM and histopathological evaluation.

Dentinal Tubule Occluding Efficacy Of Er: YAG Laser And Universal Adhesive Loaded With Nano-Carbonated Apatite.

ER:YAG laser and experimental resin-based dental adhesive loaded with functionalized carbonated apatite filler were used in this study to evaluate the dentin interaction in terms of penetration and occlusion of the dentinal tubules aiding in the control of dentin hypersensitivity (DH). Spheroidal Carbonated apatite nanoparticles (N-CAP), with an average size of 20±5 nm diameter, were synthesized, characterized, and incorporated in a universal adhesive "All Bond Universal, Bisco, USA", in (2% weight) concentration. Er:YAG laser "Lightwalker, FOTONA, EU" was adjusted to an energy output of 40mJ/ pulse and pulse repetition of 10 Hz for 10 seconds. Dentin specimens were prepared from the buccal surface of 75 extracted sound human molars. The specimens were randomly divided into five groups (n=15) according to the surface treatment: Group (L): Laser only; Group (LB): Laser in combination with adhesive; Group (LBN): Laser in combination with adhesive loaded with N-CAP; Group (B): adhesive only; and Group (BN): adhesive loaded with N-CAP. Depth of penetration and occlusion of the dentinal tubules were assessed using Environmental Scanning Electron Microscope Examination (ESEM). One-way ANOVA was used to compare groups, followed by a pairwise test for multiple comparisons (α=0.05). Groups (LB), and (LBN) showed the highest mean of dentinal tubules' penetration, with a non-significant difference between them. In contrast, the specimens treated with laser only (L) showed the most minor penetration. The employment of ER-YAG laser irradiation with the adhesive loaded with N-CAP was evaluated to be effective in penetrating and occluding the opened dentinal tubules.

Er,Cr:YSGG and 980nm diode lasers influence dentin surface volume after cariogenic challenge: in vitro study.

This study aimed to evaluate the influence of the Er,Cr:YSGG irradiation and 980-nm diode lasers on the surface roughness (SR) and volume loss (VL) of dentin subjected to cariogenic challenge. Subsequently, 130 specimens of bovine dentin were divided into the following 13 groups: NT: no treatment; FG: fluoride gel; FV: fluoride varnish; Di: 980-nm diode; Di + FG; Di + FV; FG + D; FV + Di; Er: Er,Cr:YSGG; Er + FG; Er + FV; FG + Er and FV + Er. Er,Cr:YSGG laser parameters were as follows: 0.25 W; 5.0 Hz; 4.46 J/cm2 without water and 55% air. Furthermore, the 980-nm diode laser parameters were 2.0 W; 2.0 Hz; 21.41 J/cm2. The samples from each group were subjected to pH cycling. A confocal laser scanning microscope was used to evaluate SR and VL. Difference between the volume of the reference and treated areas + DES/RE was used to determine SR and VL. The mean values of the different groups were subjected to analysis of variance and Tukey's post-hoc test. The VL values were analyzed using the Kruskal-Wallis and Dunn post-hoc test (p < 0.05). The SR of the reference area did not show a statistically significant 1807-3107-bor-38-e025treatment and cariogenic challenge (p > 0.05). Moreover, VL in the FV + Di and FV + Er groups showed a statistically significant difference compared with areas submitted to different types of treatment and cariogenic challenge (p > 0.05). Er,Cr:YSGG and 980-nm diode lasers associated with fluoride varnishes decreased dentin VL in bovine teeth submitted to cariogenic challenge.

Er:YAG Laser and Hemolasertherapy: Bone and Gingiva Gain-Case Report.

Background: Modern dentistry has increasingly valued conservative and biologically less invasive clinical practices, seeking to preserve the patients' tissues and natural dental elements. Most extractions in the dental clinic are preceded by periodontal disease that presents bone and gingival tissue loss, compromising the aesthetics as well as the support of dental elements. Objectives: The clinical approach in these cases often involves bone exertion followed by the successful installation of osseointegrated implants. Material and Methods: In this study, a case of extensive periodontal involvement and mobility of dental elements was carried out in a minimally invasive way, using the Er:YAG laser for periodontal decontamination and the hemolasertherapy technique to regenerate adjacent tissues, totaling nine weeks of treatment. Results: Clinical and radiographical improvement of tissue health and complete preservation of dental elements were observed. Conclusion: The patient underwent a follow-up appointment 2 years after the start of treatment when it was still possible to verify the stability of the clinical condition and the tissue gains obtained.

Histological evaluation of the surgical margins of oral soft tissue incisions using a dual-wavelength diode laser and an Er, Cr:YSGG laser; an ex vivo study.

OBJECTIVE: This study compared a dual-wavelength diode laser and an Er, Cr:YSGG laser in oral soft tissue incisions to determine the most effective and safest laser system at the histopathological level. METHODOLOGY: The (810 and 980 nm) dual-wavelength diode laser was used at 1.5 W and 2.5 W (CW) power settings, and the (2780 nm) Er, Cr:YSGG laser was used at 2.5 W and 3.5 W (PW) power settings. Both laser systems were used to incise the tissues of freshly dissected sheep tongue pieces to obtain the following histopathological criteria: epithelial tissue changes, connective tissue changes, and lateral thermal damage extent by optical microscopy. RESULTS: The epithelial and connective tissue damage scores were significantly higher in the dual-wavelength diode laser groups than in the Er, Cr:YSGG laser groups (P<0.001), and there was a significant difference between some groups. The extent of lateral thermal damage was also significantly higher in the diode laser groups than in the Er, Cr: YSGG laser groups (P<0.001), and there was a significant difference between groups. Group 2 (2.5 W) of the diode laser was the highest for all three criteria, while group 3 (2.5 W) of the Er, Cr:YSGG laser was the lowest. CONCLUSION: The Er, Cr:YSGG laser with an output power of 2.5 W is, histologically, the most effective and safest laser for oral soft tissue incision. The dual-wavelength diode laser causes more damage than the Er, Cr:YSGG laser, but it can be used with a low output power and 1 mm safety distance in excisional biopsy.

Long-term functional outcomes and surgical retreatment after thulium laser enucleation of the prostate: A 10-year follow-up study.

BACKGROUND: To evaluate the 10-year functional outcomes (primary) and frequency and predictors of BPH surgical retreatment (secondary) after ThuLEP. MATERIALS AND METHODS: A single-center retrospective analysis of consecutive patients undergoing ThuLEP between 2010 and 2013 was performed. Inclusion criteria were: age ≥ 40 years, prostate volume (PV) ≥ 80 mL, International Prostate Symptom Score (IPSS)-Total score ≥ 8 points. IPSS-Total score was the primary outcome, and BPH surgical retreatment rate was the secondary outcome. Paired t-test, McNemar test, and Wilcoxon signed-rank test were used to compare variables. Logistic regression analysis was performed to evaluate predictors of surgical retreatment. RESULTS: A total of 410 patients with a mean ±SD age of 63.9 ± 9.7 years and a PV of 115.6 ± 28.6 mL were included. Mean ±SD follow-up was 108.2 ± 29.6 months. IPSS-Total score was significantly improved at 1 year compared to baseline (23.3 ± 4.7 vs. 10.3 ± 3.8; p<0.001). It was similar after 5 years (10.5 ± 3.6 vs. 10.7 ± 5.0; p=0.161), with a significant worsening at 10 years (10.3 ±4.8 vs. 13.8 ±4.5; p=0.042) but remaining statistically and clinically better than baseline (13.8 ±4.5 vs. 22.1 ±4.3; p<0.001). After 10 years, 21 (5.9%) patients had undergone BPH reoperation. Baseline PV (adjusted OR 1.27, 95% CI 1.09-1.41; p<0.001) and time from BPH surgery (adjusted OR 1.32, 95% CI 1.15-1.43; p<0.001) were predictors of BPH surgical retreatment. CONCLUSIONS: ThuLEP is associated with optimal functional outcomes and a low frequency of BPH surgical retreatment in the long-term. Baseline PV and time from surgery were predictors of BPH reoperation.

Angle-closure glaucoma associated with vitreous prolapse after neodymium-doped yttrium-aluminumgarnet laser posterior capsulotomy.

Capsulotomy with neodymium-doped yttriumaluminum-garnet (Nd:YAG) laser is an effective treatment for posterior capsule opacification following cataract surgery. A wide opening of the posterior capsule associated with the ruptured anterior hyaloid can cause anterior chamber vitreous prolapse. Two patients who developed angle-closure glaucoma associated with vitreous prolapse following Nd:YAG laser posterior capsulotomy were successfully treated with antiglaucoma medication and peripheral iridotomies. Patient identification for potential risk factors and a careful postoperative follow-up are essential to avoid these serious complications.

Morphological and ultrastructural changes in fungal agents after LASER application.

BACKGROUND: Onychomycosis is a fungal nail infection of difficult treatment due to the fungal survival capacity and reduced number of effective therapies. The present study aimed to isolate fungal agents that cause onychomycosis in immunocompetent patients and evaluate how LASER treatments affect the growth and ultrastructure of isolates. METHODS: In total, 21 patients with positive direct microscopic examination (DME) for onychomycosis had nail samples collected for cultivation and phenotypic identification of microorganisms. From these patients, 12 underwent LASER treatment, divided in Group 1 (n = 5) treated with Nd: YAG 1,064 nm, and Group 2 (n = 7) treated with Nd: YAG 1,064 nm + Er: YAG 2,940 nm + topical isoconazole. Transmission Electron Microscopy (TEM) was performed to evaluate ultrastructural changes after treatment. RESULTS: DME, cultivation, and phenotypic identification showed that the most identified fungus was Trichophyton rubrum spp. After LASER therapy, sample cultivation showed alterations in the fungal morphology with reduction of hyphae, conidia, and reproductive structures. Alterations in fungal cell wall structure, cytoplasm density, and organelles were observed by TEM. CONCLUSION: LASER irradiation causes changes in the fungal cells, especially in the number of hyphae and the presence of conidia. In addition, it affects fungal growth and reproduction capacity, which interferes with their infection ability and virulence.

Fox eyes lift-A new protocol for eyebrow elevation with laser Fotona.

BACKGROUND: The eyelids play an important role in our appearance and are usually the first to show signs of age. The Fotona SP Spectro Systems consist of a range of noninvasive laser treatments that work together synergistically to tighten the collagen in four dimensions and provide long-lasting firmness to the face. The Fotona SP Spectro combines two wavelengths: Er:YAG (2940 nm) and Nd:YAG (1064 nm) with four distinct treatments: SmoothLiftingTM, FRAC3®, PIANO®, and SupErficialTM, allowing safe, painless, noninvasive, and no downtime rejuvenation. AIMS: To present a new protocol of treatment with Fotona SP Spectro for eyebrow elevation, which we call fox eyes lift (FEL), and compare it to the standard SmoothEye® (SE) protocol. METHODS: This is a prospective, interventional, split-face study. The sample consisted of 21 subjects (19 women) with a mean age of 50.1 ± 7.9 years who underwent two different protocols, that is, SE on one side and FEL on the other. The protocol used on each side was selected by drawing lots. Three sessions were held at 1-month intervals. Standardized photographic documentation was obtained before and 30 days after the end of treatment. Eyebrow position before and after complete treatment was quantified using ImageJ software. RESULTS: Statistical analysis by ANOVA showed a significant improvement in eyebrow position after treatment with both protocols, with a significantly greater effect of FEL (p = 0.0003 d = 0.95). CONCLUSION: Fox eyes lift is an efficient and safe technique providing significant improvement in the position of the eyebrow.

Use of both the diode and Er: YAG lasers in esthetic crown lengthening with the aid of digitally guided dual technique: 3 years follow-up.

OBJECTIVE: To explore the feasibility of the usage of digital guides in combination with low- and high-power lasers for the treatment of excessive gingival display, also known as "gummy smile". CLINICAL CONSIDERATIONS: Excessive gingival display due to altered passive eruption can affect patient's perception of their own esthetics and consequently have an impact on self-confidence. Therefore, the management of this condition should offer a predictable and stable long-lasting solution. To attain these objectives, digital planning emerges as a tool in optimizing the outcomes of crown lengthening surgery for this condition by enhancing precision through the use of surgical guides. Additionally, the usage of high- and low-powered lasers can provide a safe approach because of their tissue selective removal properties. CONCLUSIONS: The technique described showed satisfactory clinical results in the short- and long-term follow-up, leading to an improvement in patients' self-esteem. This approach integrates digital and laser technologies to deliver a surgical treatment characterized by precision, efficiency, and safety. CLINICAL SIGNIFICANCE: Digital dentistry has contributed to innovative dental procedures, as personalizing surgical guides for patients, assisting and guiding incisions of the gingival margins, as well as the extension of the osteotomy, during the procedures for increasing the clinical crown. Furthermore, smile esthetics are directly related to an individual's improved emotional and social quality of life.

Efficacy of a novel three-step decontamination protocol for titanium-based dental implants: An in vitro and in vivo study.

AIM: The aim of the study was to evaluate several mechanical and chemical decontamination methods associated with a newly introduced biofilm matrix disruption strategy for biofilm cleaning and preservation of implant surface features. MATERIALS AND METHODS: Titanium (Ti) discs were obtained by additive manufacturing. Polymicrobial biofilm-covered Ti disc surfaces were decontaminated with mechanical [Ti curette, Teflon curette, Ti brush, water-air jet device, and Er:YAG laser] or chemical [iodopovidone (PVPI) 0.2% to disrupt the extracellular matrix, along with amoxicillin; minocycline; tetracycline; H2 O2 3%; chlorhexidine 0.2%; NaOCl 0.95%; hydrocarbon-oxo-borate-based antiseptic] protocols. The optimal in vitro mechanical/chemical protocol was then tested in combination using an in vivo biofilm model with intra-oral devices. RESULTS: Er:YAG laser treatment displayed optimum surface cleaning by biofilm removal with minimal deleterious damage to the surface, smaller Ti release, good corrosion stability, and improved fibroblast readhesion. NaOCl 0.95% was the most promising agent to reduce in vitro and in vivo biofilms and was even more effective when associated with PVPI 0.2% as a pre-treatment to disrupt the biofilm matrix. The combination of Er:YAG laser followed by PVPI 0.2% plus NaOCl 0.95% promoted efficient decontamination of rough Ti surfaces by disrupting the biofilm matrix and killing remnants of in vivo biofilms formed in the mouth (the only protocol to lead to ~99% biofilm eradication). CONCLUSION: Er:YAG laser + PVPI 0.2% + NaOCl 0.95% can be a reliable decontamination protocol for Ti surfaces, eliminating microbial biofilms without damaging the implant surface.

Experiencia inicial con HoLEP. Serie de casos / Initial experience with HoLEP. Case series

Objetivo: Describir los primeros casos de enucleación de próstata con láser de holmio (HoLEP) en pacientes con agrandamiento de la glándula prostática en Ecuador. Método: Es un estudio prospectivo en el que se evaluaron 200 pacientes que se sometieron a HoLEP con un seguimiento de seis meses posteriores a la cirugía. El equipo de enucleación varió: para los primeros 108 casos fue un HoL de 72 W de pulso corto con los parámetros 3 J 24 Hz 72 W y los 92 casos restantes se realizaron con Cyber laser Ho Qanta 100 w de doble pulso configurado a 1,8 J 45 Hz 81 W. Resultados: La edad promedio de los pacientes fue 69,27 años, el tiempo quirúrgico promedio fue de 59,48 minutos, en el 29,5% de los casos se extrajo más de 80 gramos de tejido prostático, en el 94% de los casos la estancia hospitalaria fue de un día, el 98% de los pacientes no tuvieron complicaciones posquirúrgicas y ninguno requirió trasfusión sanguínea. Conclusión: La HoLEP es un método eficiente, confiable y replicable independientemente del tamaño de la próstata. La tasa de complicaciones, el tiempo de cateterismo intravesical y la estancia hospitalaria son bajas

Objective: To describe the first cases of holmium laser enucleation of the prostate (HoLEP) in patients with an enlarged prostatic gland in Ecuador. Method: We prospectively evaluated 200 patients who underwent HoLEP and followed up to six months after surgery. The enucleation equipment varied, for the first 108 cases was with a HoL of 72 W short pulse with the parameters 3 J 24 Hz 72 W, the remaining 92 cases were done with Cyber laser Ho Qanta 100 w double pulse set up at 1.8 J 45 Hz 81 W. Results: From the accounted patients and procedures, the average age was 69.27 years, the mean surgical time was 59.48 minutes, in 29.5% of the cases more than 80 grams of prostate tissue was extracted, 94% of the cases were a 1-day hospital stay and 98% of the patients had no postoperative complications and none required trans or postoperative blood transfusion. Conclusion: HoLEP is an efficient, reliable, and replicable method independent of the prostatic size. The rate of complications, intravesical catheterization time, and hospital stay are lowe

Chemical and morphological analysis of dentin irradiated by different high-power lasers: a systematic review.

PURPOSE: This systematic review provides an overview of the main chemical and morphological alterations generated on dentin by different high-power lasers' irradiation. METHODS: The review was registered in PROSPERO (CRD42023394164) and PRISMA guidelines were followed. The search strategy was conducted on MEDLINE (PubMed), Embase (Elsevier), and Web of Science (Clarivate) databases. The eligibility criteria were established according to the PICOS strategy, focusing on in vitro and ex vivo studies that assessed the chemical and morphological changes in dentin using five high-power lasers: Nd:YAG (1064 nm), Er:YAG (2940 nm), Er, Cr:YSGG (2780 nm), diode (980 nm), and CO2 (10,600 nm). Publication range was from 2010 to 2022. Data was summarized in tables and risk of bias was assessed by QUIN tool. RESULTS: The search resulted in 2255 matches and 57 studies composed the sample. The methods most used to assess the outcomes were scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and Raman. The studies presented "medium" and "low" risk of bias. The laser prevalently identified was the Er:YAG laser, associated with dentin ablation, absence of smear layer, and exposed tubules. The Nd:YAG laser generated vitreous surface and thermal damage, such as carbonization and cracks. The other lasers caused an irregular surface and no adverse thermal effects. Regarding the chemical structure, only the Er,Cr:YSGG laser caused collagen matrix reduction. The effects found were more intense with higher dosimetry. CONCLUSION: Evidence available indicates that the irradiation of dentin with high-power lasers are related to morphological outcomes favorable to adhesive restorative procedures, with minimal changes in collagen matrix and mineral content. However, those observations should be carried carefully by clinicians and more clinical trials regarding the association of high-power laser irradiation and restorative procedure longevity are needed.

Effects of long-pulsed 1064-nm Nd:YAG laser on telangiectasias and reticular veins: a human in-vivo histological study.

BACKGROUND: Telangiectasias and reticular veins are associated with aesthetic disorders. Sclerotherapy is the gold standard treatment, but long-pulsed 1064-nm Nd:YAG laser (LP1064 laser) is also used. No data on the human histological effects of these lasers are reported. The objective was to test different LP1064 laser parameters and their histological effects on the dermis, collagen, telangiectasias, and reticular veins. METHODS: This was a single-center, prospective, single-arm, case-control, human study. During surgery (dermolipectomy), the abdominal section of 10 female patients was irradiated with 6 different transdermal LP1064 laser parameters after anesthesia. Ten pieces with areas of varying irradiation were evaluated according to the characteristics of the vessels identified by area. In each piece, two irradiation areas were performed per group, totaling 12 irradiation areas per piece, with 120 regions later analyzed at the end of the ten samples. After removing the surgical product, histological sections were extracted, and the dermis, telangiectasias, and reticular veins were analyzed. RESULTS: Histological analysis showed that exposition to six different parameters from LP1064 laser led to significant dermal layer separation and collagen alterations. The effects were inconsistent on the loss of endothelial cells, intravascular thrombus formation, and fusion of vascular walls for both telangiectasias and reticular veins. In reticular veins, effects on intravascular thrombus formation and vascular wall fusion were not observed. CONCLUSIONS: The LP1064 laser in monotherapy with fixed settings did not lead to a consistent vascular lesion to promote immediate occlusion in telangiectasias and reticular veins. This strategy may not work as monotherapy for small vein treatment, but the possible late response to the LP1064 laser cannot be ruled out and require further investigation.

Histological artifacts associated with laser and electroscalpel gingivectomy: Case series / Artefactos histológicos asociados a gingivectomía con láser y electrobisturí: serie de casos.

Introduction. Over time, efforts have been invested in the design of new instruments that overcome the disadvantages of the gold standard instrument in surgery, the scalpel. As a result, electronic equipment has emerged such as the electric scalpel and laser devices. The available evidence on these instruments suggests that the tissue response is related to each instrument's physical and biological cutting principles. Objective. To compare the histological changes in gingiva samples associated with surgical cutting performed with a 940 nm diode laser, a 2780 nm erbium, chromium: yttriumscandium-gallium-garnet (Er,Cr:YSGG) laser, and an electric scalpel, by presenting a series of cases. Case presentation. We present three cases of healthy patients undergoing cosmetic surgery. The clinical examination revealed exposure of a keratinized gingiva band greater than 4 mm, normal color and texture in gingival tissue, with a firm consistency and no bleeding on periodontal probing. Gingivectomy was indicated with the following protocols: Diode laser of 940 nm at 1 W, in continuous mode; Er,Cr:YSGG laser of 2780 nm at 2.5 W, 75 Hz, H mode, air 20, water 40, gold tip MT4); and electric scalpel in cutting mode at power level four. Gingival tissue samples were taken and stored in 10% formaldehyde for histological analysis. Conclusion. All the evaluated cutting instruments generated histological changes produced by the thermal effect, the main ones being collagen coagulation and carbonization. The depth of thermal damage caused by the 2780 nm Er,Cr:YSGG laser was much lesser than that induced by the electric scalpel and the 940 nm diode laser.

Introducción. Históricamente se ha invertido esfuerzo en el diseño de nuevos instrumentos que superen las desventajas del estándar de referencia en cirugía, el bisturí. Como consecuencia de esto, han surgido equipos electrónicos como el electrobisturí y los diferentes dispositivos de tecnología láser. La información disponible sobre estos instrumentos sugiere que la respuesta del tejido intervenido está influenciada por los principios físicos y biológicos de corte del instrumento. Objetivo. Comparar los cambios histológicos en muestras de encía asociados al corte quirúrgico realizado con láser de diodo de 940 nm, láser de erbio, cromo: itrio-escandiogalio-granate (Er,Cr:YSGG) (2780nm) y electrobisturí mediante una presentación de serie de casos. Presentación de los casos. Se presentan tres casos de pacientes sanos sometidos a cirugía estética. El examen clínico reveló la exposición de una banda gingival queratinizada mayor de 4 mm, tejido gingival de color y textura normales, de consistencia firme y sin sangrado al sondaje periodontal. Se indicó gingivectomía con los siguientes protocolos: láser de diodo de 940 nm a 1 W, en modo continuo; láser de Er,Cr:YSGG de 2780 nm a 2,5 W, 75 Hz, modo H, aire 20, agua 40, punta de oro MT4; y bisturí eléctrico en modo de corte, a nivel de potencia cuatro. Se tomaron muestras de tejido gingival y se almacenaron en formaldehído al 10 % para su análisis histológico. Conclusión. Los tres instrumentos de corte generaron cambios histológicos producidos por el efecto térmico; los principales fueron coagulación del colágeno y carbonización.

Vestibuloplastia con láser de Er Cr:YSGG y nanotransportador biomolécula EPX: un nuevo cicatrizante periodontal / Vestibuloplasty with Er Cr:YSGG laser and EPX biomolecule nanocarrier: a new periodontal healing agent

La resorción ósea alveolar suele dar lugar a que las inserciones de la mucosa interfieran para la construcción, estabilidad y retención de una prótesis removible, una opción que permite modificar este tejido se obtiene por medio de una vestibuloplastia. Actualmente se puede favorecer la cicatrización de heridas utilizando láser de alta potencia aplicado a procedimientos quirúrgicos orales. Se realiza reporte de caso en paciente femenino a la que se realizó procedimiento de vestibuloplastia con láser de Er,Cr:YSGG, utilizando de forma postoperatoria gel de quitosano en nanotransportador biomolécula EPX. Se observa una cicatrización rápida y favorable al combinar ambas terapéuticas, además al utilizar productos con quitosano se disminuye el riesgo de la necrosis de fibroblastos gingivales humanos como recientemente se reportó en el uso de colutorios de clorhexidina (AU)

Alveolar bone resorption often results in mucosal insertions interfering with the construction, stability and retention of a removable prosthesis, an option to modify this tissue is obtained by means of vestibuloplasty. Currently, wound healing can be promoted by using high power laser applied to oral surgical procedures. A case report of a female patient who underwent a vestibuloplasty procedure with laser Er,Cr:YSGG, using chitosan gel with EPX biomolecule nanocarriers postoperatively. A fast and favorable healing is observed when combining both therapeutics, besides, when using products with chitosan, the risk of necrosis of human gingival fibroblasts is reduced, as recently reported in the use of chlorhexidine mouthwashes (AU)

Er:YAG laser in selective caries removal and dentin treatment with chitosan: a randomized clinical trial in primary molars.

This study evaluated the effect of chitosan on dentin treatment after selective removal of caries lesions with Er:YAG laser in reducing Streptococcus mutans, as well as its effect on the performed restorations. The sample consisted of children (aged 7 to 9 years) with active carious lesions and dentin cavitation located on the occlusal surface of deciduous molars. Eighty teeth were randomly distributed into 4 groups according to the caries removal method: Er:YAG laser (250 mJ/4 Hz) or bur and dentin surface treatment: 2.5% chitosan solution or distilled water. The bacterial load of caries-affected dentin was quantified by counting CFU/mg (n = 10). The teeth were restored and evaluated at 7 days, 6 months, and 12 months using modified USPHS criteria (n = 20). Microbiological data was analyzed by Mann-Whitney and clinical analyses were done using Kruskal-Wallis and Dunn test (α = 0.05). The results showed that the Er:YAG laser significantly reduced the amount of Streptococcus mutans (p = 0.0068). After dentin treatment with chitosan, there was a significant reduction in the amount of Streptococcus mutans for both removal methods (p = 0.0424). For the retention and secondary caries criteria, no significant differences were observed along the evaluated time (p > 0.05). The laser-treated group was rated "bravo" for discoloration (p = 0.0089) and marginal adaptation (p = 0.0003) after 6 and 12 months compared to baseline. The Er:YAG laser reduced the amount of Streptococcus mutans and the chitosan showed an additional antibacterial effect. After 1 year, the Er:YAG laser-prepared teeth, regardless of the dentin treatment, showed greater discoloration and marginal adaptation of the restorations.

Histological artifacts associated with laser and electroscalpel gingivectomy: Case series / Artefactos histológicos asociados a gingivectomía con láser y electrobisturí: serie de casos

Introduction. Over time, efforts have been invested in the design of new instruments that overcome the disadvantages of the gold standard instrument in surgery, the scalpel. As a result, electronic equipment has emerged such as the electric scalpel and laser devices. The available evidence on these instruments suggests that the tissue response is related to each instrument's physical and biological cutting principles. Objective. To compare the histological changes in gingiva samples associated with surgical cutting performed with a 940 nm diode laser, a 2780 nm erbium, chromium: yttriumscandium-gallium-garnet (Er,Cr:YSGG) laser, and an electric scalpel, by presenting a series of cases. Case presentation. We present three cases of healthy patients undergoing cosmetic surgery. The clinical examination revealed exposure of a keratinized gingiva band greater than 4 mm, normal color and texture in gingival tissue, with a firm consistency and no bleeding on periodontal probing. Gingivectomy was indicated with the following protocols: Diode laser of 940 nm at 1 W, in continuous mode; Er,Cr:YSGG laser of 2780 nm at 2.5 W, 75 Hz, H mode, air 20, water 40, gold tip MT4); and electric scalpel in cutting mode at power level four. Gingival tissue samples were taken and stored in 10% formaldehyde for histological analysis. Conclusion. All the evaluated cutting instruments generated histological changes produced by the thermal effect, the main ones being collagen coagulation and carbonization. The depth of thermal damage caused by the 2780 nm Er,Cr:YSGG laser was much lesser than that induced by the electric scalpel and the 940 nm diode laser.

Introducción. Históricamente se ha invertido esfuerzo en el diseño de nuevos instrumentos que superen las desventajas del estándar de referencia en cirugía, el bisturí. Como consecuencia de esto, han surgido equipos electrónicos como el electrobisturí y los diferentes dispositivos de tecnología láser. La información disponible sobre estos instrumentos sugiere que la respuesta del tejido intervenido está influenciada por los principios físicos y biológicos de corte del instrumento. Objetivo. Comparar los cambios histológicos en muestras de encía asociados al corte quirúrgico realizado con láser de diodo de 940 nm, láser de erbio, cromo: itrio-escandio-galio-granate (Er,Cr:YSGG) (2780nm) y electrobisturí mediante una presentación de serie de casos. Presentación de los casos. Se presentan tres casos de pacientes sanos sometidos a cirugía estética. El examen clínico reveló la exposición de una banda gingival queratinizada mayor de 4 mm, tejido gingival de color y textura normales, de consistencia firme y sin sangrado al sondaje periodontal. Se indicó gingivectomía con los siguientes protocolos: láser de diodo de 940 nm a 1 W, en modo continuo; láser de Er,Cr:YSGG de 2780 nm a 2,5 W, 75 Hz, modo H, aire 20, agua 40, punta de oro MT4; y bisturí eléctrico en modo de corte, a nivel de potencia cuatro. Se tomaron muestras de tejido gingival y se almacenaron en formaldehído al 10 % para su análisis histológico. Conclusión. Los tres instrumentos de corte generaron cambios histológicos producidos por el efecto térmico; los principales fueron coagulación del colágeno y carbonización. La profundización del daño térmico causada por el láser de Er,Cr:YSGG de 2780 nm fue mucho menor que la generada por el electrobisturí y por el láser de diodo de 940 nm.