Associations between the keratinized mucosa width and the underlying alveolar bone dimensions at partial edentulous molar sites: a retrospective cross-sectional study.

BACKGROUND: The assessment of hard and soft tissue at edentulous sites is important for subsequent implant treatment design. The aim of the present study was to explore the associations between the keratinized mucosa width (KMW) and the underlying alveolar bone dimensions at partial edentulous molar sites. METHODS: In this retrospective study, a total of 110 patients with at least one missing molar were selected. The buccal KMW of the edentulous molar sites was evaluated. Cone-beam computed tomography scans were collected, and the height discrepancy between the alveolar crest and the buccal bone plate (HC-B) as well as the alveolar bone height (ABH) were measured. The KMW was compared among the HC-B and ABH groups at both maxillary and mandibular sites. Linear regression and generalized estimation equations (GEEs) were used to explore the associations between the KMW and alveolar bone dimensions at α = 0.05. RESULTS: Among the 110 patients, 158 edentulous molar sites were analyzed. The average HC-B and ABH were significantly lower at the maxillary sites (1.26 ± 1.62 mm, 11.62 ± 3.94 mm) than at the mandibular sites (3.67 ± 2.85 mm, 14.91 ± 3.01 mm, p < 0.001). The KMW was significantly lower at sites with HC-B > 2 mm than at sites with HC-B ≤ 2 mm both in the maxilla and mandible (p < 0.001). No significant differences were found between the KMW at sites with ABH < 10 mm and sites with ABH ≥ 10 mm (p > 0.05). Linear regression and GEEs analyses revealed that the HC-B was significantly associated with the KMW (B = -0.339, p < 0.001), while the association between the KMW and the ABH was not statistically significant (B = -0.046, p = 0.352). CONCLUSIONS: The buccal KMW at edentulous molar sites was significantly associated with the HC-B. Alveolar ridges presenting with a sloped configuration were more prone to possess a narrower band of keratinized mucosa. Both hard and soft tissue augmentation should be considered for implant treatment at these sites. The correlations of dynamic changes between the KMW and alveolar bone dimensions after tooth extraction should be further investigated.

Accuracy of computer-guided implant surgery in partially edentulous patients: a prospective observational study.

PURPOSE: This study aims to evaluate the amount of distortion using computer-guided implant surgery with 3D printed surgical guides in limited edentulous spaces. MATERIALS AND METHODS: 25 bone level self-tapping implants (Straumann® BL and BLT) were randomly inserted in either distal or intercalary posterior mandibular edentulism using a fully digital protocol and 3D printed surgical guides. Amount of inaccuracy was evaluated after superimposing the 3 coordinates of virtually planned and final implant images, which were obtained using intra-oral scans and scan bodies. Four evaluation parameters were considered: origo-displacement, error depth, apical displacement and angle between the planned and the placed implant. RESULTS: The average of distortion was 0.71 mm for the origo-displacement, 0.36 mm for the error depth, 0.52 mm for the horizontal displacement and 3.34º for the error angle. CONCLUSION: The major reason of exclusion was CBCT artifacts. Results of this study were aligned with the results of previous studies concerning partially edentulous spaces. CAD/CAM manufacturing process did not result in significant distortion whilst the biggest part of distortions originated from the surgical process. The learning curve in computer-guided implant surgery presented an important source of inaccuracy.

Accuracy of an autonomous dental implant robotic system in partial edentulism: A pilot clinical study.

OBJECTIVES: Robots are increasingly being used for surgical procedures in various specialties. However, information about the accuracy of robot-assisted dental implant surgery is lacking. This pilot clinical study aimed to investigate the accuracy of an autonomous dental implant robotic (ADIR) system in partially edentulous cases. MATERIAL AND METHODS: The ADIR system was used to place a total of 20 implants in 13 participants. Implant deviation from the planned positions was assessed to determine accuracy. The entry, apex, and angular deviations were described as means ± standard deviation. A two-sample t test was used to compare implant deviation between the flap and flapless groups and between maxillary and mandibular implants (α = .05). RESULTS: The entry, apex, and angular deviations were 0.65 ± 0.32 mm, 0.66 ± 0.34 mm, and 1.52 ± 1.01°, respectively, with no statistically significant difference between the flap and flapless approaches (P > .05). No adverse events were encountered in any of the participants. CONCLUSIONS: DIR accuracy in this clinical series was comparable to that reported for static and dynamic computer-assisted implant surgery. Robotic computer-assisted implant surgery may be useful for dental implant placement, potentially improving the quality and safety of the procedure. CLINICAL RELEVANCE: The findings of this study showed that the ADIR system could be useful for dental implant surgery.

Orofacial esthetics, chewing function, and oral health-related quality of life in Kennedy class I patients with mini-implant-retained removable partial dentures: A 3-year clinical prospective study.

This prospective clinical study aimed to assess self-reported orofacial esthetics, chewing function, and oral health-related quality of life (OHRQoL) over three years in the Kennedy Class I patients without posterior dentition who received free-end saddle removable partial dentures (RPDs) retained by two mini dental implants (MDIs) inserted in the canine/first premolar region. The study's robust findings reaffirm the viability of MDI-retained RPDs as a treatment modality in contemporary prosthodontics, instilling confidence in the dental community. MATERIALS AND METHODS: 92 participants with posterior edentulism in the maxilla or mandible received 184 MDIs and 92 RPDs. After one year, three participants were excluded, and another seven were excluded after three years. The final sample was 82 participants. Self-perceived orofacial esthetics was assessed by the Orofacial Esthetic Scale (OES), chewing function by the Chewing Function Questionnaire (CFQ), and the OHRQoL by the OHIP-14. Statistical analysis utilized multivariate regression analysis, standardized effect size calculation, Wilcoxon Signed Rank test, and Friedman's test. RESULTS: OHRQoL and chewing function significantly improved (p < 0.001) one month after MDI loading by the new RPDs and continued to improve over the observation period (p < 0.05). The OES also significantly improved (p < 0.001) and remained almost unchanged over the next three years (p = 0.440). CONCLUSION: Despite the limitations of this study, the MDI-retained RPD appears to be a viable treatment modality in contemporary prosthodontics from the patients' perspective.

Management of Partially Edentulous Arches Using a Cast Metal Framework with Thermoplastic Denture Base Clasp-Like Extension on Anterior Abutment Teeth - A Case Report.

ABSTRACT: Rehabilitation of partially edentulous arches with a cast partial denture is a commonly opted treatment modality where fixed prosthesis is not indicated. However, due to the aesthetic compromise of the various metal components when placed in the esthetic zone, different modifications have been considered for its fabrication. This case report describes a novel way of restoring partially edentulous arches with increased masticatory efficiency and good emergence profile without compromising the patient's esthetic desires. The report describes an aesthetic alternative using thermoplastic denture base clasp like extension for anterior abutment teeth while restoring the missing teeth with a cast partial denture.

Deep learning-designed implant-supported posterior crowns: Assessing time efficiency, tooth morphology, emergence profile, occlusion, and proximal contacts.

OBJECTIVES: To compare implant supported crowns (ISCs) designed using deep learning (DL) software with those designed by a technician using conventional computer-aided design software. METHODS: Twenty resin-based partially edentulous casts (maxillary and mandibular) used for fabricating ISCs were evaluated retrospectively. ISCs were designed using a DL-based method with no modification of the as-generated outcome (DB), a DL-based method with further optimization by a dental technician (DM), and a conventional computer-aided design method by a technician (NC). Time efficiency, crown contour, occlusal table area, cusp angle, cusp height, emergence profile angle, occlusal contacts, and proximal contacts were compared among groups. Depending on the distribution of measured data, various statistical methods were used for comparative analyses with a significance level of 0.05. RESULTS: ISCs in the DB group showed a significantly higher efficiency than those in the DM and NC groups (P ≤ 0.001). ISCs in the DM group exhibited significantly smaller volume deviations than those in the DB group when superimposed on ISCs in the NC group (DB-NC vs. DM-NC pairs, P ≤ 0.008). Except for the number and intensity of occlusal contacts (P ≤ 0.004), ISCs in the DB and DM groups had occlusal table areas, cusp angles, cusp heights, proximal contact intensities, and emergence profile angles similar to those in the NC group (P ≥ 0.157). CONCLUSIONS: A DL-based method can be beneficial for designing posterior ISCs in terms of time efficiency, occlusal table area, cusp angle, cusp height, proximal contact, and emergence profile, similar to the conventional human-based method. CLINICAL SIGNIFICANCE: A deep learning-based design method can achieve clinically acceptable functional properties of posterior ISCs. However, further optimization by a technician could improve specific outcomes, such as the crown contour or emergence profile angle.

Effects of various prosthetic methods for patients with Kennedy Class I partial edentulism on oral hypofunction, subjective symptoms, and oral health-related quality of life.

PURPOSE: This propensity score matching, multicenter, cross-sectional study was performed to examine the effects of various prosthetic methods for dental clinic outpatients with Kennedy Class I partial edentulism (KCIPE) on oral hypofunction, subjective frailty symptoms, and oral health-related quality of life (QOL). METHODS: Patients (n = 348) were classified into the following three groups for analysis: NT, patients with natural dentition providing intermaxillary contact in four occlusal supporting zones; RPD, patients with KCIPE who received removable partial dentures; and ISFP, patients with KCIPE who received implant-supported fixed prostheses. Participants' basic characteristics were recorded, and oral function tests were conducted. Subjective symptoms of physical and oral frailty were investigated via questionnaire. Oral health-related QOL was assessed using the Japanese short version of the Oral Health Impact Profile (OHIP-JP16). Propensity score matching was performed to adjust for patient background factors that could influence oral hypofunction in each group. RESULTS: Compared with the ISFP group, the RPD group had significantly higher rates of poor oral hygiene, reduced occlusal force, decreased masticatory function, and declines in swallowing function and oral hypofunction; the odds ratio for oral hypofunction was 4.67. Compared with the ISFP group, the RPD group had significantly greater subjective symptoms of physical frailty and oral frailty, as well as higher OHIP scores. CONCLUSIONS: Prosthetic treatment of KCIPE affected oral hypofunction, subjective frailty symptoms, and oral health-related QOL in dental clinic outpatients.

Accuracy of semi-occlusive CAD/CAM titanium mesh using the reverse guided bone regeneration digital protocol: A preliminary clinical study.

PURPOSE: The reverse guided bone regeneration protocol is a digital workflow that has been introduced to reduce the complexity of guided bone regeneration and promote prosthetically guided bone reconstruction with a view to achieving optimal implant placement and prosthetic finalisation. The aim of the present study was to investigate the accuracy of this digital protocol. MATERIALS AND METHODS: Sixteen patients with partial edentulism in the maxilla or mandible and with vertical or horizontal bone defects were treated using the reverse guided bone regeneration protocol to achieve fixed implant rehabilitations. For each patient, a digital wax-up of the future rehabilitation was created and implant planning was carried out, then the necessary bone reconstruction was simulated virtually and the CAD/CAM titanium mesh was designed and used to perform guided bone regeneration. The computed tomography datasets from before and after guided bone regeneration were converted into 3D models and aligned digitally. The actual position of the mesh was compared to the virtual position to assess the accuracy of the digital project. Surgical and healing complications were also recorded. A descriptive analysis was conducted and a one-sample t test and Wilcoxon test were utilised to assess the statistical significance of the accuracy. The level of significance was set at 0.05. RESULTS: A total of 16 patients with 16 treated sites were enrolled. Comparing the virtually planned mesh position with the actual position, an overall mean discrepancy between the two of 0.487 ± 0.218 mm was achieved. No statistically significant difference was observed when comparing this to a predefined minimum tolerance (P = 0.06). No surgical complications occurred, but two healing complications were recorded (12.5%). CONCLUSION: Within the limitations of the present study, the reverse guided bone regeneration digital protocol seems to be able to achieve good accuracy in reproducing the content of the virtual plan. Nevertheless, further clinical comparative studies are required to confirm these results.

Accuracy of implant placement using a mixed reality-based dynamic navigation system versus static computer-assisted and freehand surgery: An in Vitro study.

PURPOSE: This in vitro study aimed to compare the accuracy of dental implant placement in partially edentulous maxillary models using a mixed reality-based dynamic navigation (MR-DN) system to conventional static computer-assisted implant surgery (s-CAIS) and a freehand (FH) method. METHODS: Forty-five partially edentulous models (with teeth missing in positions #15, #16 and #25) were assigned to three groups (15 per group). The same experienced operator performed the model surgeries using an MR-DN system (group 1), s-CAIS (group 2) and FH (group 3). In total, 135 dental implants were placed (45 per group). The primary outcomes were the linear coronal deviation (entry error; En), apical deviation (apex error; Ap), XY and Z deviations, and angular deviation (An) between the planned and actual (post-surgery) position of the implants in the models. These deviations were computed as the distances between the stereolithographic (STL) files for the planned implants and placed implants captured with an intraoral scanner. RESULTS: Across the three implant sites, the MR-DN system was significantly more accurate than the FH method (in XY, Z, En, Ap and An) and s-CAIS (in Z, Ap and An), respectively. However, S-CAIS was more accurate than MR-DN in XY, and no difference was found between MR-DN and s-CAIS in En. CONCLUSIONS: Within the limits of this study (in vitro design, only partially edentulous models), implant placement accuracy with MR-DN was superior to that of FH and similar to that of s-CAIS. STATEMENT OF CLINICAL RELEVANCE: In vitro, MR-DN showed greater accuracy in implant positioning than FH, and similar accuracy to s-CAIS: it could, therefore, represent a new option for the surgeon. However, clinical studies are needed to determine the feasibility of MR-DN.

Accuracy of open-sleeved vs. closed-sleeved static computer-assisted implant systems in immediate maxillary molar implant placement: An in vitro study.

OBJECTIVES: The objective of this study is (1) to compare the accuracy of an open-sleeved static computer-assisted implant system (sCAIS) with a closed-sleeve sCAIS and free-hand approach in immediate implant placement (IIP) of maxillary molar sites and (2) to investigate the influence of socket morphology on these approaches. MATERIALS AND METHODS: Ninety partially edentulous duplicated maxillary models simulating three different molar sockets (type A, B, and C based on Smith and Tarnow's classification) were investigated. Three modalities, including sCAIS with open-sleeves, sCAIS with closed-sleeves, and free-hand approach, were applied separately to 30 models with 120 sockets. A customized Python script automatically measured the deviations between the virtual and actual implant positions for all 360 implants. RESULTS: The 3D deviations of sCAIS were significantly influenced by the socket and sleeve types. Both guided groups exhibited significantly less deviation than the free-hand approach. Type A and C sockets resulted in better implant positions than type B socket sites. In type B sockets, the open-sleeve group achieved significantly less deviation compared to the closed-sleeve group, with respect to apical global (1.34 ± 0.53 vs. 1.84 ± 0.59 mm), coronal horizontal (0.68 ± 0.36 vs. 0.93 ± 0.34 mm), apical horizontal (1.21 ± 0.59 vs. 1.74 ± 0.63 mm), and angular (3.30 ± 1.41 vs. 4.41 ± 1.96°) deviations. CONCLUSIONS: Guided implant surgery significantly reduces deviations during molar IIP compared to free-hand procedures. Furthermore, the use of open-sleeve sCAIS appears to be more effective in minimizing deviations in type B sockets when compared with the closed-sleeve guided system.

Radiographic evaluation of the distance between the restoration margin and the alveolar bone crest in dental implant patients: A retrospective study.

OBJECTIVES: The recently introduced Implant Disease Risk Assessment (IDRA) identifies a restoration margin-alveolar bone crest (RM-AC) distance of less than 1.5 mm as a key risk factor for peri­implant disease among eight major risk factors. This study evaluated the impact of the RM-AC distance on marginal bone loss (MBL) through radiographic analysis. METHODS: This retrospective cross-sectional study included 77 partially edentulous patients (39 females and 38 males, aged 22 to 76 years) with 202 platform-switched conical connection implants, cement-retained, implant-supported fixed restorations, and bone-level implants placed between 2016 and 2021. Dental implants were followed for least 6 to 36 months at follow up functional loading. Study participants were categorized into Group A (RM-AC distance ≤ 1.5 mm, n = 69) and Group B (RM-AC distance > 1.5 mm, n = 133). Twelve patients in Group B and five patients in Group A had no history of periodontal disease. The MBL was measured radiographically from the most coronal point of the implant shoulder to the alveolar bone, and the RM-AC distance was measured from the restoration margin to the alveolar crest. Multinomial logistic regression analysis was used for statistical evaluation. RESULTS: The incidence of MBL in Group A was statistically significant and 3.42 times higher than that in Group B. The rate of MBL in periodontitis Stage 4 was found to be 26.31 times higher than that in periodontitis Stage 2. The incidence of MBL was 6.097 and 5.02 times higher with increasing implant diameter and length, respectively. CONCLUSION: This study conclusively demonstrates that RM-AC distance ≤ 1.5 significantly increases the risk of MBL, particularly in patients with a history of periodontal disease. CLINICAL SIGNIFICANCE: This study highlights the critical role of maintaining an RM-AC distance greater than 1.5 mm in the prevention of MBL, particularly in patients with a history of periodontal disease. Since implant diameter and length have a significant impact on the risk of MBL, it emphasizes that implant demographics should also be carefully evaluated.

Histologic evaluation of edentulous alveolar ridge horizontal bone augmentations using a xenogeneic bone substitute and autologous platelet concentrates: a case series.

OBJECTIVES: This case series aimed to assess the efficacy of a novel horizontal ridge augmentation modality using histology. Combinations of "sticky bone" and tenting screws without autologous bone were used as augmentative materials. METHOD AND MATERIALS: Five individuals presenting healed, atrophic, partially edentulous sites that required horizontal bone augmentation before implant placement were enrolled. Patients underwent the same augmentation type and 5 months of postoperative reentry procedures. The first surgery served as implant site development, whereas the biopsy and corresponding implant placement were performed during reentry. The bone was qualitatively analyzed using histology and histomorphometry and quantitatively evaluated using CBCT. RESULTS: Four individuals healed uneventfully. Early wound dehiscence occurred in one case. Histology showed favorable bone substitute incorporation into the newly formed bone and intimate contact between de novo bone and graft material in most cases. Histomorphometry revealed an average of 48 ± 28% newly formed bone, 19 ± 13% graft material, and 33 ± 26% soft tissue components. The CBCT-based mean alveolar ridge horizontal increase was 3.9 ± 0.6 mm at 5 months postoperatively. CONCLUSIONS: The described augmentation method appears suitable for implant site development resulting in favorable bone quality according to histology. However, clinicians must accommodate 1 to 2 mm of resorption in augmentative material width at the buccal aspect.

Clinical Measurements of Force Exerted on Anterior Teeth in Partial Edentulous Distal Extension.

PURPOSE: To determine the influence of partial edentulous distal extension and the use of removable partial dental prostheses in partially edentulous areas on the force exerted on the anterior teeth. MATERIALS AND METHODS: A total of 83 volunteer patients participated in this study. The occlusal force was measured using an occlusal force measuring sheet in the patient's mouth. The occlusal forces and ratios were compared using the Wilcoxon signed-rank test (P < .05). RESULTS: The force exerted on the anterior teeth increased significantly as the number of remaining teeth decreased in an edentulous distal extension. The force exerted on the anterior teeth decreased significantly with the use of a removable partial dental prosthesis. CONCLUSIONS: In a clinical setting, when the number of remaining teeth in a partial edentulous distal extension decreases, the burden on the anterior teeth increases. Our findings suggest that, for patients with partial edentulous distal extension, using a removable partial dental prosthesis is effective in preserving the residual anterior teeth by reducing excessive force.

Radiographic evaluation of marginal bone levels around implants supporting splinted fixed bridges: A retrospective study on 412 implants.

OBJECTIVES: The effect of the implant position within the prosthesis on bone remodeling is scarcely documented so far. Thus, the aim of the present study was to investigate whether central implants may suffer higher peri-implant marginal bone levels (MBL) compared to laterals in case of fixed splinted bridges supported by ≥ three implants. MATERIALS AND METHODS: Partially edentulous subjects rehabilitated with at least one fixed bridge supported by ≥ three dental implants were enrolled. MBL was assessed radiographically by means of intraoral radiographs acquired with phosphor plates and imported in a dedicated software. MBL was calculated as the distance between the implant platform level and the most coronal visible bone-to-implant contact. A three-level linear mixed effects model was used for investigating the fixed effect of patient-, prosthesis-, and implant-level variables on the MBL. RESULTS: Overall, 90 patients rehabilitated with 130 splinted fixed bridges supported by 412 implants were included. The median follow-up was 136 months. The mean peri-implant MBL resulted statistically significantly higher at central implants if compared to lateral implants (p < .01). The estimated MBL averages for central and external implants were 1.68 and 1.18 mm, respectively. The prosthesis-level variables suggested that a cement-retained bridge was prone to a significant 0.82 mm higher MBL than a screw-retained one. Implant surface showed an association with MBL changes, although less pronounced than implant retention. CONCLUSIONS: In case of ≥3 adjacent implants supporting splinted bridges, central implants were more predisposed to MBL compared to laterals. At the prosthesis level, implants supporting cement-retained bridges were statistically more susceptible to MBL compared to screw-retained ones. Surface characteristics can also influence MBL stability at the implant level.

Survival time analysis of remaining teeth following replacement of unilateral free-end missing teeth: A comparison between fixed implant-supported prostheses and removable partial dentures.

OBJECTIVES: This retrospective study aimed to investigate the differences in tooth loss rate between fixed implant-supported prostheses (FISPs) and removable partial dentures (RPDs) in cases of unilateral free-end missing teeth. MATERIALS AND METHODS: The data of 324 patients who underwent treatment with FISPs or RPDs for unilateral free-end missing teeth and satisfied the applicable criteria, were evaluated (47 in the FISPs group and 277 in the RPDs group). After propensity score (PS) matching, which was used to extract patients with similar background factors related to prosthetic selection at baseline, survival time analyses were performed with tooth loss as the endpoint. The adjusted variables were age, sex, number of restored teeth, periodontal status, and the practicing dentist's experience in years. The remaining teeth were classified into subcategories in relation to the missing molars. RESULTS: Overall, 58 patients (29 in each group) selected by PS matching were evaluated in the final analysis. The total number of lost teeth was 35 (FISPs group: n = 10; RPDs group: n = 25). The mean (±SD) period to tooth loss and the 10-year survival rates in the FISPs and RPDs groups were 51.6 (±30.1) months and 42.3 (±29.7) months, 70.5% and 16.4%, respectively. The log-rank test showed that significantly longer survival time in FISPs compared with RPDs. CONCLUSIONS: After adjustments for confounding factors using PS matching, replacing unilateral free-end missing teeth with FISPs may exhibit a lower tooth loss rate in adjacent and contralateral teeth compared to replacing with RPDs.

Dynamic navigation-assisted bone ring technique for partially edentulous patients with severe vertical ridge defects.

The autogenous bone ring technique is among the approaches for vertical alveolar ridge augmentation, and this technique can enable simultaneous implantation. However, the outcomes can be compromised due to donor site morbidity, shifting of the bone ring graft positioning, and inaccurate implant placement. In recent decades, dynamic navigation systems have been introduced into the field of implantology, allowing the accuracy of outcomes to be improved. This Technical Note describes the use of dynamic navigation to guide bone ring surgery, which is expected to enable more precise and predictable bone augmentation and implantation procedures, reduce the risk of injuries to the adjacent anatomical structures, and achieve better treatment outcomes.

A randomized, multicenter, double-blinded parallel study to evaluate the safety and performance of zoledronate-coated versus uncoated dental implants in partially edentulous patients.

OBJECTIVE: To evaluate patient safety, implants survival and implant stability of the bisphosphonate (zoledronate) as a coating on dental implants in patients requiring oral rehabilitation in the posterior maxilla. MATERIALS AND METHODS: In this multicenter, double-blind, randomized controlled study, 62 patients were randomized to receive either zoledronate-coated or uncoated control implants in the premolar or molar area of the maxilla, using a one stage-protocol. Due to dropouts and exclusion 49 patients completed the study. The implants were examined by resonance frequency analysis (RFA) using an implant stability quotient (ISQ) scale at the time of insertion, and at 8 weeks, and after 12 weeks prior to prosthetic restoration. Radiographs were taken prior to surgery, directly after insertion, and during the follow-up at 12 weeks, 6 months, and 1 year to analyze changes in marginal bone levels (MBL). Finally, all complications and adverse effects (AE) were observed and recorded. RESULTS: Out of 62 included patients, 49 patients completed the study. No AE were reported by patients receiving zoledronate-coated implants. There was no statistically significant difference between the zoledronate-coated or uncoated implant groups when comparing ISQ levels at insertion and after 12 weeks of healing, the mean of the ISQ values demonstrated a change of 4.64 (95% confidence interval: 15.46; 5.79, p = 0.43) between the two groups. At 8- and 12-weeks, ISQ values remained stable (range 62-70). Radiographic analysis showed no statistically significant difference in MBL between the two implant groups after 1 year of loading neither at the mesial side (p = 0.99) or the distal side (p = 0.97). MBL for coated implants were 0.57 mm at the mesial side and 0.46 mm at the distal side. For the uncoated implants, MBL was 0.48 mm at the mesial side and 0.47 mm at the distal side. CONCLUSION: The zoledronate-coated dental implants are safe to use in a one-stage surgery protocol in patients requiring oral rehabilitation in the posterior maxilla, after 1 year of loading. There were no statically significant changes in implant stability and marginal bone levels measured by intraoral radiographs in comparison to uncoated control implants.

Association between the number of teeth and incident pre-diabetes among middle-aged adults with periodontal disease: a retrospective cohort analysis of Japanese claims data.

OBJECTIVES: To investigate the association between the number of teeth and the new onset of pre-diabetes. DESIGN: Retrospective cohort study. SETTING: The National Database of Health Insurance Claims and Specific Health Checkups of Japan, which holds information from both the yearly health check-up programme known as the 'Specific Health Checkup' and health insurance claims data. PARTICIPANTS: 1 098 371 normoglycaemic subjects who participated in the Specific Health Checkup programme every year from fiscal year (FY) 2015 to FY 2018 and had dental insurance claims data with a diagnosis of periodontal disease during FY 2016. OUTCOME MEASURES: Incidence of pre-diabetes or diabetes observed at the Specific Health Checkup during FY 2018. RESULTS: Among the participants, 1 77 908 subjects developed pre-diabetes, and 579 developed diabetes at the check-up during the subsequent follow-up year. Compared with the subjects with 26-28 teeth, those with 20-25, 15-19 or 1-14 teeth were associated with an increased likelihood of developing pre-diabetes or diabetes onset with adjusted ORs of 1.03 (95% CI: 1.02 to 1.05), 1.06 (1.03 to 1.09) and 1.07 (1.04 to 1.11), respectively. No clear modifications were observed for age, sex, body mass index or current smoking. CONCLUSIONS: Having fewer teeth was associated with a higher incidence of pre-diabetes. Due to the limitations of this study, however, causality remains undetermined.

TranSDFNet: Transformer-Based Truncated Signed Distance Fields for the Shape Design of Removable Partial Denture Clasps.

The ever-growing aging population has led to an increasing need for removable partial dentures (RPDs) since they are typically the least expensive treatment options for partial edentulism. However, the digital design of RPDs remains challenging for dental technicians due to the variety of partially edentulous scenarios and complex combinations of denture components. To accelerate the design of RPDs, we propose a U-shape network incorporated with Transformer blocks to automatically generate RPD clasps, one of the most frequently used RPD components. Unlike existing dental restoration design algorithms, we introduce the voxel-based truncated signed distance field (TSDF) as an intermediate representation, which reduces the sensitivity of the network to resolution and contributes to more smooth reconstruction. Besides, a selective insertion scheme is proposed for solving the memory issue caused by Transformer blocks and enables the algorithm to work well in scenarios with insufficient data. We further design two weighted loss functions to filter out the noisy signals generated from the zero-gradient areas in TSDF. Ablation and comparison studies demonstrate that our algorithm outperforms state-of-the-art reconstruction methods by a large margin and can serve as an intelligent auxiliary in denture design.

Maxillary labial peri-implant hard and soft tissue alteration observed on cross-sectional dimension: a 2-year prospective observational study.

OBJECTIVES: To evaluate how peri-implant hard and soft tissue height (BH, MH) alter after final prostheses placement related to labial hard and soft tissue thickness (BW, MW). MATERIALS AND METHODS: Forty-five platform-switched implants were classified into four groups according to BW and MW: type 1 (thick BW and thick MW), type 2 (thick BW and thin MW), type 3 (thin BW and thick MW), type 4 (thin BW and thin MW). Tissue resorption was evaluated on cone-beam CT images taken at final prostheses placement, at 1-year follow-up, and at 2-year follow-up. Kruskal-Wallis test and post hoc Mann-Whitney test were applied; significance was set to 0.05. RESULTS: BH resorption was 0.13 ± 0.12 mm in type 1, 0.26 ± 0.17 mm in type 2, 0.09 ± 0.09 mm in type 3, 0.94 ± 0.19 mm in type 4. Differences between type 1 and 4, type 2 and 4, and type 3 and 4 were statistically significant (p < 0.001, p = 0.005, p < 0.001, respectively). MH resorption was 0.10 ± 0.09 mm in type 1, 0.36 ± 0.16 mm in type 2, 0.12 ± 0.12 mm in Type 3, 0.79 ± 0.23 mm in type 4. Differences between type 1 and 2, type 1 and 4, type 2 and 3, type 2 and 4 and type 3 and 4 were statistically significant (p < 0.001). CONCLUSIONS: Significantly less BH/MH resorption occurs around implants with thick BW/MW than those with thin BW/MW in 2 years. Implants with thick peri-implant soft tissue resulted in significantly less tissue resorption in second year after final prostheses placement.