iEat: automatic wearable dietary monitoring with bio-impedance sensing.

Diet is an inseparable part of good health, from maintaining a healthy lifestyle for the general population to supporting the treatment of patients suffering from specific diseases. Therefore it is of great significance to be able to monitor people's dietary activity in their daily life remotely. While the traditional practices of self-reporting and retrospective analysis are often unreliable and prone to errors; sensor-based remote diet monitoring is therefore an appealing approach. In this work, we explore an atypical use of bio-impedance by leveraging its unique temporal signal patterns, which are caused by the dynamic close-loop circuit variation between a pair of electrodes due to the body-food interactions during dining activities. Specifically, we introduce iEat, a wearable impedance-sensing device for automatic dietary activity monitoring without the need for external instrumented devices such as smart utensils. By deploying a single impedance sensing channel with one electrode on each wrist, iEat can recognize food intake activities (e.g., cutting, putting food in the mouth with or without utensils, drinking, etc.) and food types from a defined category. The principle is that, at idle, iEat measures only the normal body impedance between the wrist-worn electrodes; while the subject is doing the food-intake activities, new paralleled circuits will be formed through the hand, mouth, utensils, and food, leading to consequential impedance variation. To quantitatively evaluate iEat in real-life settings, a food intake experiment was conducted in an everyday table-dining environment, including 40 meals performed by ten volunteers. With a lightweight, user-independent neural network model, iEat could detect four food intake-related activities with a macro F1 score of 86.4% and classify seven types of foods with a macro F1 score of 64.2%.

An Ensemble Model Health Care Monitoring System.

Internet of things (IoT) is utilized to enhance conventional health care systems in several ways, including patient's disease monitoring. The data gathered by IoT devices is very beneficial to medical facilities and patients. The data needs to be secured against unauthorized modifications because of security and privacy concerns. Conversely, a variety of procedures are offered by block chain technology to safeguard data against modifications. Block chain-based IoT-based health care monitoring is thus a fascinating technical advancement that may aid in easing security and privacy problems associated withthe collection of data during patient monitoring. In this work, we present an ensemble classification-based monitoring system with a block-chain as the foundation for an IoT health care model. Initially, data generation is done by considering the diseases including chronic obstructive pulmonary disease (COPD), lung cancer, and heart disease. The IoT health care data is then preprocessed using enhanced scalar normalization. The preprocessed data was used to extract features such as mutual information (MI), statistical features, adjusted entropy, and raw features. The total classified result is obtained by averaging deep maxout, improved deep convolutional network (IDCNN), and deep belief network (DBN) ensemble classification. Finally, decision-making is done by doctors to suggest treatment based on the classified results from the ensemble classifier. The ensemble model scored the greatest accuracy (95.56%) with accurate disease classification at a learning percentage of 60% compared to traditional classifiers such as neural network (NN) (89.08%), long short term memory (LSTM) (80.63%), deep belief network (DBN) (79.78%) and GT based BSS algorithm (89.08%).

Continuous Capnography for Early Detection of Respiratory Compromise During Gastroenterological Procedural Sedation and Analgesia.

Gastroenterology nurses working across a variety of clinical settings are responsible for periprocedural monitoring during moderate to deep procedural sedation and analgesia (PSA) to identify signs of respiratory compromise and intervene to prevent cardiorespiratory events. Pulse oximetry is the standard of care for respiratory monitoring, but it may delay or fail to detect abnormal ventilation during PSA. Continuous capnography, which measures end-tidal CO2 as a marker of alveolar ventilation, has been endorsed by a number of clinical guidelines. Large clinical trials have demonstrated that the addition of continuous capnography to pulse oximetry during PSA for various gastroenterological procedures reduces the incidence of hypoxemia, severe hypoxemia, and apnea. Studies have shown that the cost of adding continuous capnography is offset by the reduction in adverse events and hospital length of stay. In the postanesthesia care unit, continuous capnography is being evaluated for monitoring opioid-induced respiratory depression and to guide artificial airway removal. Studies are also examining the utility of continuous capnography to predict the risk of opioid-induced respiratory depression among patients receiving opioids for primary analgesia. Continuous capnography monitoring has become an essential tool to detect early signs of respiratory compromise in patients receiving PSA during gastroenterological procedures. When combined with pulse oximetry, it can help reduce cardiorespiratory adverse events, improve patient outcomes and safety, and reduce health care costs.

Design, Fabrication, and Evaluation of 3D Biopotential Electrodes and Intelligent Garment System for Sports Monitoring.

This study presents the development and evaluation of an innovative intelligent garment system, incorporating 3D knitted silver biopotential electrodes, designed for long-term sports monitoring. By integrating advanced textile engineering with wearable monitoring technologies, we introduce a novel approach to real-time physiological signal acquisition, focusing on enhancing athletic performance analysis and fatigue detection. Utilizing low-resistance silver fibers, our electrodes demonstrate significantly reduced skin-to-electrode impedance, facilitating improved signal quality and reliability, especially during physical activities. The garment system, embedded with these electrodes, offers a non-invasive, comfortable solution for continuous ECG and EMG monitoring, addressing the limitations of traditional Ag/AgCl electrodes, such as skin irritation and signal degradation over time. Through various experimentation, including impedance measurements and biosignal acquisition during cycling activities, we validate the system's effectiveness in capturing high-quality physiological data. Our findings illustrate the electrodes' superior performance in both dry and wet conditions. This study not only advances the field of intelligent garments and biopotential monitoring, but also provides valuable insights for the application of intelligent sports wearables in the future.

An Inertial-Based Wearable System for Monitoring Vital Signs during Sleep.

This study explores the feasibility of a wearable system to monitor vital signs during sleep. The system incorporates five inertial measurement units (IMUs) located on the waist, the arms, and the legs. To evaluate the performance of a novel framework, twenty-three participants underwent a sleep study, and vital signs, including respiratory rate (RR) and heart rate (HR), were monitored via polysomnography (PSG). The dataset comprises individuals with varying severity of sleep-disordered breathing (SDB). Using a single IMU sensor positioned at the waist, strong correlations of more than 0.95 with the PSG-derived vital signs were obtained. Low inter-participant mean absolute errors of about 0.66 breaths/min and 1.32 beats/min were achieved, for RR and HR, respectively. The percentage of data available for analysis, representing the time coverage, was 98.3% for RR estimation and 78.3% for HR estimation. Nevertheless, the fusion of data from IMUs positioned at the arms and legs enhanced the inter-participant time coverage of HR estimation by over 15%. These findings imply that the proposed methodology can be used for vital sign monitoring during sleep, paving the way for a comprehensive understanding of sleep quality in individuals with SDB.

A Novel AI Approach for Assessing Stress Levels in Patients with Type 2 Diabetes Mellitus Based on the Acquisition of Physiological Parameters Acquired during Daily Life.

Stress is the inherent sensation of being unable to handle demands and occurrences. If not properly managed, stress can develop into a chronic condition, leading to the onset of additional chronic health issues, such as cardiovascular illnesses and diabetes. Various stress meters have been suggested in the past, along with diverse approaches for its estimation. However, in the case of more serious health issues, such as hypertension and diabetes, the results can be significantly improved. This study presents the design and implementation of a distributed wearable-sensor computing platform with multiple channels. The platform aims to estimate the stress levels in diabetes patients by utilizing a fuzzy logic algorithm that is based on the assessment of several physiological indicators. Additionally, a mobile application was created to monitor the users' stress levels and integrate data on their blood pressure and blood glucose levels. To obtain better performance metrics, validation experiments were carried out using a medical database containing data from 128 patients with chronic diabetes, and the initial results are presented in this study.

Inertial Measurement Unit and Heart Rate Monitoring to Assess Cardiovascular Fitness of Manual Wheelchair Users during the Six-Minute Push Test.

Manual wheelchair users (MWUs) are prone to a sedentary life that can negatively affect their physical and cardiovascular health, making regular assessment important to identify appropriate interventions and lifestyle modifications. One mean of assessing MWUs' physical health is the 6 min push test (6MPT), where the user propels themselves as far as they can in six minutes. However, reliance on observer input introduces subjectivity, while limited quantitative data inhibit comprehensive assessment. Incorporating sensors into the 6MPT can address these limitations. Here, ten MWUs performed the 6MPT with additional sensors: two inertial measurement units (IMUs)-one on the wheelchair and one on the wrist together with a heart rate wristwatch. The conventional measurements of distance and laps were recorded by the observer, and the IMU data were used to calculate laps, distance, speed, and cadence. The results demonstrated that the IMU can provide the metrics of the traditional 6MPT with strong significant correlations between calculated laps and observer lap counts (r = 0.947, p < 0.001) and distances (r = 0.970, p < 0.001). Moreover, heart rate during the final minute was significantly correlated with calculated distance (r = 0.762, p = 0.017). Enhanced 6MPT assessment can provide objective, quantitative, and comprehensive data for clinicians to effectively inform interventions in rehabilitation.

Wearable ECG Device and Machine Learning for Heart Monitoring.

With cardiovascular diseases (CVD) remaining a leading cause of mortality, wearable devices for monitoring cardiac activity have gained significant, renewed interest among the medical community. This paper introduces an innovative ECG monitoring system based on a single-lead ECG machine, enhanced using machine learning methods. The system only processes and analyzes ECG data, but it can also be used to predict potential heart disease at an early stage. The wearable device was built on the ADS1298 and a microcontroller STM32L151xD. A server module based on the architecture style of the REST API was designed to facilitate interaction with the web-based segment of the system. The module is responsible for receiving data in real time from the microcontroller and delivering this data to the web-based segment of the module. Algorithms for analyzing ECG signals have been developed, including band filter artifact removal, K-means clustering for signal segmentation, and PQRST analysis. Machine learning methods, such as isolation forests, have been employed for ECG anomaly detection. Moreover, a comparative analysis with various machine learning methods, including logistic regression, random forest, SVM, XGBoost, decision forest, and CNNs, was conducted to predict the incidence of cardiovascular diseases. Convoluted neural networks (CNN) showed an accuracy of 0.926, proving their high effectiveness for ECG data processing.

Human Activity Recording Based on Skin-Strain-Actuated Microfluidic Pumping in Asymmetrically Designed Micro-Channels.

The capability to record data in passive, image-based wearable sensors can simplify data readouts and eliminate the requirement for the integration of electronic components on the skin. Here, we developed a skin-strain-actuated microfluidic pump (SAMP) that utilizes asymmetric aspect ratio channels for the recording of human activity in the fluidic domain. An analytical model describing the SAMP's operation mechanism as a wearable microfluidic device was established. Fabrication of the SAMP was achieved using soft lithography from polydimethylsiloxane (PDMS). Benchtop experimental results and theoretical predictions were shown to be in good agreement. The SAMP was mounted on human skin and experiments conducted on volunteer subjects demonstrated the SAMP's capability to record human activity for hundreds of cycles in the fluidic domain through the observation of a stable liquid meniscus. Proof-of-concept experiments further revealed that the SAMP could quantify a single wrist activity repetition or distinguish between three different shoulder activities.

Wearable Alcohol Monitoring Device for the Data-Driven Transcutaneous Alcohol Diffusion Model.

Wearable alcohol monitoring devices demand noninvasive, real-time measurement of blood alcohol content (BAC) reliably and continuously. A few commercial devices are available to determine BAC noninvasively by detecting transcutaneous diffused alcohol. However, they suffer from a lack of accuracy and reliability in the determination of BAC in real time due to the complex scenario of the human skin for transcutaneous alcohol diffusion and numerous factors (e.g., skin thickness, kinetics of alcohol, body weight, age, sex, metabolism rate, etc.). In this work, a transcutaneous alcohol diffusion model has been developed from real-time captured data from human wrists to better understand the kinetics of diffused alcohol from blood to different skin epidermis layers. Such a model will be a footprint to determine a base computational model in larger studies. Eight anonymous volunteers participated in this pilot study. A laboratory-built wearable blood alcohol content (BAC) monitoring device collected all the data to develop this diffusion model. The proton exchange membrane fuel cell (PEMFC) sensor was fabricated and integrated with an nRF51822 microcontroller, LMP91000 miniaturized potentiostat, 2.4 GHz transceiver supporting Bluetooth low energy (BLE), and all the necessary electronic components to build this wearable BAC monitoring device. The %BAC data in real time were collected using this device from these volunteers' wrists and stored in the end device (e.g., smartphone). From the captured data, we demonstrate how the volatile alcohol concentration on the skin varies over time by comparing the alcohol concentration in the initial stage (= 10 min) and later time (= 100 min). We also compare the experimental results with the outputs of three different input profiles: piecewise linear, exponential linear, and Hoerl, to optimize the developed diffusion model. Our results demonstrate that the exponential linear function best fits the experimental data compared to the piecewise linear and Hoerl functions. Moreover, we have studied the impact of skin epidermis thickness within ±20% and demonstrate that a 20% decrease in this thickness results in faster dynamics compared to thicker skin. The model clearly shows how the diffusion front changes within a skin epidermis layer with time. We further verified that 60 min was roughly the time to reach the maximum concentration, Cmax, in the stratum corneum from the transient analysis. Lastly, we found that a more significant time difference between BACmax and Cmax was due to greater alcohol consumption for a fixed absorption time.

IoT-Based Heartbeat Rate-Monitoring Device Powered by Harvested Kinetic Energy.

Remote patient-monitoring systems are helpful since they can provide timely and effective healthcare facilities. Such online telemedicine is usually achieved with the help of sophisticated and advanced wearable sensor technologies. The modern type of wearable connected devices enable the monitoring of vital sign parameters such as: heart rate variability (HRV) also known as electrocardiogram (ECG), blood pressure (BLP), Respiratory rate and body temperature, blood pressure (BLP), respiratory rate, and body temperature. The ubiquitous problem of wearable devices is their power demand for signal transmission; such devices require frequent battery charging, which causes serious limitations to the continuous monitoring of vital data. To overcome this, the current study provides a primary report on collecting kinetic energy from daily human activities for monitoring vital human signs. The harvested energy is used to sustain the battery autonomy of wearable devices, which allows for a longer monitoring time of vital data. This study proposes a novel type of stress- or exercise-monitoring ECG device based on a microcontroller (PIC18F4550) and a Wi-Fi device (ESP8266), which is cost-effective and enables real-time monitoring of heart rate in the cloud during normal daily activities. In order to achieve both portability and maximum power, the harvester has a small structure and low friction. Neodymium magnets were chosen for their high magnetic strength, versatility, and compact size. Due to the non-linear magnetic force interaction of the magnets, the non-linear part of the dynamic equation has an inverse quadratic form. Electromechanical damping is considered in this study, and the quadratic non-linearity is approximated using MacLaurin expansion, which enables us to find the law of motion for general case studies using classical methods for dynamic equations and the suitable parameters for the harvester. The oscillations are enabled by applying an initial force, and there is a loss of energy due to the electromechanical damping. A typical numerical application is computed with Matlab 2015 software, and an ODE45 solver is used to verify the accuracy of the method.

Research on Monitoring Assistive Devices for Rehabilitation of Movement Disorders through Multi-Sensor Analysis Combined with Deep Learning.

This study aims to integrate a convolutional neural network (CNN) and the Random Forest Model into a rehabilitation assessment device to provide a comprehensive gait analysis in the evaluation of movement disorders to help physicians evaluate rehabilitation progress by distinguishing gait characteristics under different walking modes. Equipped with accelerometers and six-axis force sensors, the device monitors body symmetry and upper limb strength during rehabilitation. Data were collected from normal and abnormal walking groups. A knee joint limiter was applied to subjects to simulate different levels of movement disorders. Features were extracted from the collected data and analyzed using a CNN. The overall performance was scored with Random Forest Model weights. Significant differences in average acceleration values between the moderately abnormal (MA) and severely abnormal (SA) groups (without vehicle assistance) were observed (p < 0.05), whereas no significant differences were found between the MA with vehicle assistance (MA-V) and SA with vehicle assistance (SA-V) groups (p > 0.05). Force sensor data showed good concentration in the normal walking group and more scatter in the SA-V group. The CNN and Random Forest Model accurately recognized gait conditions, achieving average accuracies of 88.4% and 92.3%, respectively, proving that the method mentioned above provides more accurate gait evaluations for patients with movement disorders.

Recent Innovations in Footwear and the Role of Smart Footwear in Healthcare-A Survey.

Smart shoes have ushered in a new era of personalised health monitoring and assistive technologies. Smart shoes leverage technologies such as Bluetooth for data collection and wireless transmission, and incorporate features such as GPS tracking, obstacle detection, and fitness tracking. As the 2010s unfolded, the smart shoe landscape diversified and advanced rapidly, driven by sensor technology enhancements and smartphones' ubiquity. Shoes have begun incorporating accelerometers, gyroscopes, and pressure sensors, significantly improving the accuracy of data collection and enabling functionalities such as gait analysis. The healthcare sector has recognised the potential of smart shoes, leading to innovations such as shoes designed to monitor diabetic foot ulcers, track rehabilitation progress, and detect falls among older people, thus expanding their application beyond fitness into medical monitoring. This article provides an overview of the current state of smart shoe technology, highlighting the integration of advanced sensors for health monitoring, energy harvesting, assistive features for the visually impaired, and deep learning for data analysis. This study discusses the potential of smart footwear in medical applications, particularly for patients with diabetes, and the ongoing research in this field. Current footwear challenges are also discussed, including complex construction, poor fit, comfort, and high cost.

mmWave-RM: A Respiration Monitoring and Pattern Classification System Based on mmWave Radar.

Breathing is one of the body's most basic functions and abnormal breathing can indicate underlying cardiopulmonary problems. Monitoring respiratory abnormalities can help with early detection and reduce the risk of cardiopulmonary diseases. In this study, a 77 GHz frequency-modulated continuous wave (FMCW) millimetre-wave (mmWave) radar was used to detect different types of respiratory signals from the human body in a non-contact manner for respiratory monitoring (RM). To solve the problem of noise interference in the daily environment on the recognition of different breathing patterns, the system utilised breathing signals captured by the millimetre-wave radar. Firstly, we filtered out most of the static noise using a signal superposition method and designed an elliptical filter to obtain a more accurate image of the breathing waveforms between 0.1 Hz and 0.5 Hz. Secondly, combined with the histogram of oriented gradient (HOG) feature extraction algorithm, K-nearest neighbours (KNN), convolutional neural network (CNN), and HOG support vector machine (G-SVM) were used to classify four breathing modes, namely, normal breathing, slow and deep breathing, quick breathing, and meningitic breathing. The overall accuracy reached up to 94.75%. Therefore, this study effectively supports daily medical monitoring.

Bio-Skin-Inspired Flexible Pressure Sensor Based on Carbonized Cotton Fabric for Human Activity Monitoring.

With the development of technology, people's demand for pressure sensors with high sensitivity and a wide working range is increasing. An effective way to achieve this goal is simulating human skin. Herein, we propose a facile, low-cost, and reproducible method for preparing a skin-like multi-layer flexible pressure sensor (MFPS) device with high sensitivity (5.51 kPa-1 from 0 to 30 kPa) and wide working pressure range (0-200 kPa) by assembling carbonized fabrics and micro-wrinkle-structured Ag@rGO electrodes layer by layer. In addition, the highly imitated skin structure also provides the device with an extremely short response time (60/90 ms) and stable durability (over 3000 cycles). Importantly, we integrated multiple sensor devices into gloves to monitor finger movements and behaviors. In summary, the skin-like MFPS device has significant potential for real-time monitoring of human activities in the field of flexible wearable electronics and human-machine interaction.

ML-Based Edge Node for Monitoring Peoples' Frailty Status.

The development of contactless methods to assess the degree of personal hygiene in elderly people is crucial for detecting frailty and providing early intervention to prevent complete loss of autonomy, cognitive impairment, and hospitalisation. The unobtrusive nature of the technology is essential in the context of maintaining good quality of life. The use of cameras and edge computing with sensors provides a way of monitoring subjects without interrupting their normal routines, and has the advantages of local data processing and improved privacy. This work describes the development an intelligent system that takes the RGB frames of a video as input to classify the occurrence of brushing teeth, washing hands, and fixing hair. No action activity is considered. The RGB frames are first processed by two Mediapipe algorithms to extract body keypoints related to the pose and hands, which represent the features to be classified. The optimal feature extractor results from the most complex Mediapipe pose estimator combined with the most complex hand keypoint regressor, which achieves the best performance even when operating at one frame per second. The final classifier is a Light Gradient Boosting Machine classifier that achieves more than 94% weighted F1-score under conditions of one frame per second and observation times of seven seconds or more. When the observation window is enlarged to ten seconds, the F1-scores for each class oscillate between 94.66% and 96.35%.

Use of intensive care, intracranial pressure monitoring, and external ventricular drainage devises in patients with bacterial meningitis, a cohort study.

BACKGROUND: Bacterial meningitis can cause a life-threatening increase in intracranial pressure (ICP). ICP-targeted treatment including an ICP monitoring device and external ventricular drainage (EVD) may improve outcomes but is also associated with the risk of complications. The frequency of use and complications related to ICP monitoring devices and EVDs among patients with bacterial meningitis remain unknown. We aimed to investigate the use of ICP monitoring devices and EVDs in patients with bacterial meningitis including frequency of increased ICP, drainage of cerebrospinal fluid (CSF), and complications associated with the insertion of ICP monitoring and external ventricular drain (EVD) in patients with bacterial meningitis. METHOD: In a single-center prospective cohort study (2017-2021), we examined the frequency of use and complications of ICP-monitoring devices and EVDs in adult patients with bacterial meningitis. RESULTS: We identified 108 patients with bacterial meningitis admitted during the study period. Of these, 60 were admitted to the intensive care unit (ICU), and 47 received an intracranial device (only ICP monitoring device N = 16; EVD N = 31). An ICP > 20 mmHg was observed in 8 patients at insertion, and in 21 patients (44%) at any time in the ICU. Cerebrospinal fluid (CSF) was drained in 24 cases (51%). Severe complications (intracranial hemorrhage) related to the device occurred in two patients, but one had a relative contraindication to receiving a device. CONCLUSIONS: Approximately half of the patients with bacterial meningitis needed intensive care and 47 had an intracranial device inserted. While some had conservatively correctable ICP, the majority needed CSF drainage. However, two patients experienced serious adverse events related to the device, potentially contributing to death. Our study highlights that the incremental value of ICP measurement and EVD in managing of bacterial meningitis requires further research.

Update in Noninvasive Home Mechanical Ventilation: A Narrative Review of Indications, Outcomes, and Monitoring.

Hypercapnic respiratory failure arises due to an imbalance in the load-capacity-drive relationship of the respiratory muscle pump, typically arising in patients with chronic obstructive pulmonary disease, obesity-related respiratory failure, and neuromuscular disease. Patients at risk of developing chronic respiratory failure and those with established disease should be referred to a specialist ventilation unit for evaluation and consideration of home noninvasive ventilation (NIV) initiation. Clinical trials demonstrate that, following careful patient selection, home NIV can improve a range of clinical, patient-reported, and physiological outcomes. This narrative review provides an overview of the pathophysiology of chronic respiratory failure, evidence-based applications of home NIV, and monitoring of patients established on home ventilation and describes technological advances in ventilation devices, interfaces, and monitoring to enhance comfort, promote long-term adherence, and optimise gas exchange.

Noncontact Sensors for Vital Signs Measurement: A Narrative Review.

Vital signs are crucial for monitoring changes in patient health status. This review compared the performance of noncontact sensors with traditional methods for measuring vital signs and investigated the clinical feasibility of noncontact sensors for medical use. We searched the Medical Literature Analysis and Retrieval System Online (MEDLINE) database for articles published through September 30, 2023, and used the key search terms "vital sign," "monitoring," and "sensor" to identify relevant articles. We included studies that measured vital signs using traditional methods and noncontact sensors and excluded articles not written in English, case reports, reviews, and conference presentations. In total, 129 studies were identified, and eligible articles were selected based on their titles, abstracts, and full texts. Three articles were finally included in the review, and the types of noncontact sensors used in each selected study were an impulse radio ultrawideband radar, a microbend fiber-optic sensor, and a mat-type air pressure sensor. Participants included neonates in the neonatal intensive care unit, patients with sleep apnea, and patients with coronavirus disease. Their heart rate, respiratory rate, blood pressure, body temperature, and arterial oxygen saturation were measured. Studies have demonstrated that the performance of noncontact sensors is comparable to that of traditional methods of vital signs measurement. Noncontact sensors have the potential to alleviate concerns related to skin disorders associated with traditional skin-contact vital signs measurement methods, reduce the workload for healthcare providers, and enhance patient comfort. This article reviews the medical use of noncontact sensors for measuring vital signs and aimed to determine their potential clinical applicability.

Neuroprosthetic contact lens enabled sensorimotor system for point-of-care monitoring and feedback of intraocular pressure.

The wearable contact lens that continuously monitors intraocular pressure (IOP) facilitates prompt and early-state medical treatments of oculopathies such as glaucoma, postoperative myopia, etc. However, either taking drugs for pre-treatment or delaying the treatment process in the absence of a neural feedback component cannot realize accurate diagnosis or effective treatment. Herein, a neuroprosthetic contact lens enabled sensorimotor system is reported, which consists of a smart contact lens with Ti3C2Tx Wheatstone bridge structured IOP strain sensor, a Ti3C2Tx temperature sensor and an IOP point-of-care monitoring/display system. The point-of-care IOP monitoring and warning can be realized due to the high sensitivity of 12.52 mV mmHg-1 of the neuroprosthetic contact lens. In vivo experiments on rabbit eyes demonstrate the excellent wearability and biocompatibility of the neuroprosthetic contact lens. Further experiments on a living rate in vitro successfully mimic the biological sensorimotor loop. The leg twitching (larger or smaller angles) of the living rat was demonstrated under the command of motor cortex controlled by somatosensory cortex when the IOP is away from the normal range (higher or lower).