Biochar/Delonix regia seed gum/chitosan composite as efficient adsorbent for the elimination of phenol from aqueous medium.

In this study, biochar (BC) from Delonix regia pods peel and gum from Delonix regia seed (SG) were prepared, and also biochar/chitosan composite (BCS) and biochar/Delonix regia seed gum/chitosan composite (BCGS) were fabricated for the efficient adsorption of phenol. Various characterization tools such as SEM, TEM, ATR-FTIR, TGA, zeta potential, and textural investigation were studied to examine the features of the synthetized adsorbents, confirming their positive construction. It was fully studied how necessary factors, comprising pH, dose of adsorbent, contact shaking time, initial phenol concentration, and temperature influenced adsorption behavior. An obvious rise of the adsorption capacity from 60.16 to 165.20 mg/g was achieved by the modification of biochar with Delonix regia seed gum and chitosan under ideal circumstances of 2 h contact duration, pH 7, 15 °C, and a dose of 2.0 g/L. The phenol adsorption was well applied by Langmuir, Temkin, Dubinin-Radushkevich, and Sips isotherms, in addition to nonlinear pseudo-second-order kinetic model. Furthermore, the physisorption, endothermic, and spontaneous process was illustrated by thermodynamic investigation. Additionally, the fabricated adsorbents could be effectively used and regenerated without main losses of only 7.5, 4.6, and 4.0 % for BC, BCS, and BCGS, respectively in the removal percentage after seven cycles of application.

Ultra-fast and ultra-efficient phenol removal from aqueous solution using a nano biocarbon adsorbent by RSM-CCD method: parameters, isotherm, kinetic, ANOVA.

The purpose of this research is to investigate the ability of peanut shell activated carbon (PSAC) to adsorb phenol from aqueous solutions. Phenolic wastewater in various industries and their release to the environment are environmental problems. Among the various separation methods, adsorption is an accepted method because of its efficiency, simplicity, cost-effectiveness, and possibility to use different adsorbent materials to achieve maximum adsorption efficiency. Response surface methodology (RSM) was used to minimize the required experiments, modeling, finding the optimal point, and variance analysis. Among the studied variables, pH, adsorbent dosage, and initial concentration are important. The results show that it is possible to completely remove at 300 ppm of phenol concentration and 5 min. Characterization of PSAC was done using Fourier transform infrared spectroscopy spectrum (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), Brunauer-Emmet-Teller (BET), and size analysis. By examining the isotherm models, it was found that the adsorption follows the Langmuir model. The maximum adsorption capacity was 250 mg g-1 based on the Langmuir model. The three combined features of complete removal, ultra-fast adsorption, and high adsorption capacity are the unique features of this nano biocarbon for phenol removal.

Extraction of Proteins from Green Tissues of Plants and Phyllosphere.

The proteomic approach plays a key role to characterize a biological system at any given time. In recent years, advances in proteomics have led to an increasing application in all biological fields, including plant matrices and associated microbiome studies. However, extracting adequate protein samples remains the most critical step for any plant proteomics study. The protein extraction protocols proposed for the phyllosphere involve an initial leaf washing step; however, this is an approach only applicable if interest is restricted to epiphytes. A metaproteomic approach is required to obtain an overall picture and consequently an extraction that considers proteins derived from the plant, epiphytic and endophytic microorganisms. The most commonly used extractions for plant tissue involve the use of phenol or TCA-acetone. However, for efficient protein recovery is essential to remove interfering components abundant in plant tissues, such as polysaccharides, lipids, and phenolic compounds. A well-proven protocol on the basis of a combination of TCA-acetone and phenol extraction is presented here, obtaining some cleaned protein pellets, suitable for electrophoresis and subsequent proteomics studies. Important points for the success of this protocol are (i) a proper sampling and sample preparation, (ii) maintaining samples at a low temperature during extraction and using protease inhibitors, (iii) an initial step in TCA-acetone to remove part of the interfering substances, and (iv) careful recovery of the phenolic phase. Furthermore, the protocol is timesaving and can be completed in one working day.

Revealing mechanism of phenol-amine reaction to form humus in compost based on high-resolution liquid chromatography mass spectrometry and spectroscopy.

Humus is the stable form of carbon storage in straw compost. The phenol-amine reaction is a pathway for humus formation in straw compost. In this study, two reaction systems, GP group (pyrogallol and glycine) and GCP group (catechol, pyrogallol, and glycine), were constructed in a simulated composting environment and revealed the molecular binding mechanism of the phenol-amine reaction through spectroscopy and mass spectrometry. The results showed that phenolic self-polymerization was faster than phenol-amine reaction. Therefore, the aromatization degree of GP was 27.14 % higher than that of GCP. The phenol-amine reaction first produced fulvic acid, and then formed humus units rich in active functional group structures (i.e., phenolic hydroxyl and carboxyl groups). These units further captured small molecule compounds to form humic acid eventually. This study would provide theoretical support for exploring the humus formation process and the promotion of straw humification by adding phenol or amino acids to compost.

Effect of Phenol and Alkylamide Interaction on α-Glucosidase Inhibition and Cellular Antioxidant Activity during In Vitro Digestion: Using Szechuan Pepper (Zanthoxylum genus) as a Model.

Although recent evidence indicated significant phenol and alkylamide interaction in aqueous solutions, the gastrointestinal digestion influence of the combination remains unclear. This study aims to investigate phenol and alkylamide interaction during in vitro digestion, focusing on bioaccessibility and bioactivity, including α-glucosidase inhibition and cellular antioxidant activity. Additionally, the structural mechanism of phenol and alkylamide interaction during in vitro digestion was explored. The results indicated that the presence of phenols and alkylamides significantly increased or decreased their respective bioaccessibility, depending on the Zanthoxylum varieties. Furthermore, although antagonistic phenol/alkylamide interaction was evident during α-glucosidase inhibition, cellular oxidative stress alleviation, and antioxidant gene transcription upregulation, this effect weakened gradually as digestion progressed. Glycoside bond cleavage and the methylation of phenols as well as alkylamide isomerization and addition were observed during digestion, modifying the hydrogen bonding sites and interaction behavior. This study provided insights into the phenol/alkylamide interaction in the gastrointestinal tract.

Weak magnetic field and coexisting ions accelerate phenol removal by ZVI/H2O2 system: Their efficiency and mechanism.

Human activity and industrial production have led to phenol becoming a significant risk factor. The proper treatment of phenol in wastewater is essential. In this study, the utilization of weak magnetic field (WMF) and zero-valent iron (ZVI) was proposed to activate H2O2 to degrade phenol contaminant. The results show that the weak magnetic field has greatly enhanced the reaction rate of ZVI/H2O2 removal of phenol. The removal rates of phenol by ZVI/H2O2/WMF generally decreased with increasing initial pH and phenol concentrations, and firstly increase and then decrease with increasing Fe0 or H2O2 dosage. When the initial pH is 5.0, ZVI concentration of 0.2 g L-1, H2O2 concentration of 6 mM, and phenol concentration of 100 mg L-1 were used, complete removal of phenol can be achieved within 180 min at 25 °C. The degradation process was consistent with the pseudo-first-order kinetic model when the experimental data was fitted. The ZVI/H2O2/WMF process exhibited a 1.05-2.66-fold enhancement in the removal rate of phenol under various conditions, surpassing its counterpart lacking WMF. It was noticed that the presence of 1-5 mM of Ca2+, Mg2+, Cl-, SO42- ions can significantly enhance the kinetics of phenol removal by ZVI/H2O2 system with or without WMF to 2.22-10.40-fold, but NO3-, CO32-, PO43- inhibited the reaction significantly in the following order: PO43- > CO32- > NO3-. Moreover, pre-magnetization for 3 min could enhance the ZVI/H2O2 process which was valuable in treatment of real wastewater. The hydroxyl radical has been identified as the primary radical species responsible for phenol degradation. The presence of WMF accelerates the corrosion rate of ZVI, thereby promoting the release of Fe2+ ions, which in turn induces an increased production of hydroxyl radicals and facilitates phenol degradation. The compounds hydroquinone, benzoquinone, catechol, maleic acid, and CO2 were identified using GC-MS, and degradation pathways were proposed. Employing WMF in combination with various ions like Ca2+, Mg2+, Cl-, SO42- is a novel method, which can enhance oxidation capacity of ZVI/H2O2 and may lead to economic benefit.

Chemo-photodynamic antitumour therapy based on Er-doped upconversion nanoparticles coated with hypocrellin B and MnO2.

An antitumour chemo-photodynamic therapy nanoplatform was constructed based on phospholipid-coated NaYF4: Yb/Er upconversion nanoparticles (UCNPs). In this work, the amphiphilic block copolymer DSPE-PEG2000 was combined with the surface ligand oleic acid of the UCNPs through hydrophobic interaction to form liposomes with a dense hydrophobic layer in which the photosensitizer hypocrellin B (HB) was assembled. The coated HB formed J-aggregates, which caused a large redshift in the absorption spectrum and improved the quantum efficiency of energy transfer. Furthermore, MnO2 nanosheets grew in-situ on the liposomes through OMn coordination. Therefore, a multifunctional tumour microenvironment (TME)-responsive theranostic nanoplatform integrating photodynamic therapy (PDT) and chemodynamic therapy (CDT) was successfully developed. The results showed that this NIR-mediated chemo-photodynamic therapy nanoplatform was highly efficient for oncotherapy.

MXene-based composite aerogels with bifunctional ferrous ions for the efficient degradation of phenol from wastewater.

Herein, MXene-based composite aerogel (MXene-Fe2+ aerogel) are constructed by a one-step freeze-drying method, using Ti3C2Tx MXene layers as substrate material and ferrous ion (Fe2+) as crosslinking agent. With the aid of the Fe2+ induced Fenton reaction, the synthesized aerogels are used as the particle electrodes to remove phenol from wastewater with three-dimensional electrode technology. Combined with the dual roles of Fe2+ and the highly conductive MXene, the obtained particle electrode possesses extremely effective phenol degradation. The effects of experiment parameters such as Fe2+ to MXene ratio, particle electrode dosage, applied voltage, and initial pH of solution on the removal of phenol are discussed. At pH = 2.5, phenol with 50 mg/L of initial concentration can be completely removed within 50 min at 10 V with the particle electrode dosage of 0.56 g/L. Finally, the mechanism of degradation is explored. This work provides an effective way for phenol degradation by MXene-based aerogel, which has great potential for the degradation of other organic pollutants in wastewater.

Wet peroxide oxidation process catalyzed by Cu/Al2O3: phenol degradation and Cu2+ dissolution behavior.

Catalytic wet peroxide oxidation (CWPO) has become an important deep oxidation technology for organics removal in wastewater treatments. Supported Cu-based catalysts belong to an important type of CWPO catalyst. In this paper, two Cu catalysts, namely, Cu/Al2O3-air and Cu/Al2O3-H2 were prepared and evaluated through catalytic degradation of phenol. It was found that Cu/Al2O3-H2 had an excellent catalytic performance (TOC removal rate reaching 96%) and less metal dissolution than the Cu/Al2O3-air case. Moreover, when the organic removal rate was promoted at a higher temperature, the metal dissolution amounts was decreased. Combined with hydroxyl radical quenching experiments, a catalytic oxidation mechanism was proposed to explain the above-mentioned interesting behaviors of the Cu/Al2O3-H2 catalyst for CWPO. The catalytic test results as well as the proposed mechanism can provide better guide for design and synthesis of good CWPO catalysts.

First-principles study on the heterogeneous formation of environmentally persistent free radicals (EPFRs) over α-Fe2O3(0001) surface: Effect of oxygen vacancy.

Metal oxides with oxygen vacancies have a significant impact on catalytic activity for the transformation of organic pollutants in waste-to-energy (WtE) incineration processes. This study aims to investigate the influence of hematite surface oxygen point defects on the formation of environmentally persistent free radicals (EPFRs) from phenolic compounds based on the first-principles calculations. Two oxygen-deficient conditions were considered: oxygen vacancies at the top surface and on the subsurface. Our simulations indicate that the adsorption strength of phenol on the α-Fe2O3(0001) surface is enhanced by the presence of oxygen vacancies. However, the presence of oxygen vacancies has a negative impact on the dissociation of the phenol molecule, particularly for the surface with a defective point at the top layer. Thermo-kinetic parameters were established over a temperature range of 300-1000 K, and lower reaction rate constants were observed for the scission of phenolic O-H bonds over the oxygen-deficient surfaces compared to the pristine surface. The negative effects caused by the oxygen-deficient conditions could be attributed to the local reduction of FeIII to FeII, which lower the oxidizing ability of surface reaction sites. The findings of this study provide us a promising approach to regulate the formation of EPFRs.

Characterization and electrochemical properties of TiO2-rNTs/SnO2-Sb/PbO2 electrodes for the mineralization of persistent organic pollutants using anodic oxidation coupled Electro-Fenton treatment: Effect of precursor selection.

The present study compares the effect of using different solvents on the electrochemical properties of the reduced TiO2 nanotubes (TiO2-rNTs) layered Ti/TiO2-rNTs/SnO2-Sb/PbO2 anodes. The electrodes are prepared using three different solvent-based precursors: (i) isopropanol, (ii) ethylene glycol and citric acid (Pechini method), and (iii) 2-hydroxyethylammonium acetate (2HEAA) ionic liquid (IL) via the thermal decomposition route. The decomposition mechanism of precursor solutions was explored using the thermogravimetric (TGA) analysis. Further, the physicochemical properties of the electrodes are examined using Field emission Scanning Electron microscopy (FE-SEM), X-ray diffraction spectroscopy (XRD), and X-ray photoelectron emission spectroscopy (XPS). The results revealed that solvents with higher viscosity and slower decomposition rates support better film uniformity and higher stability of the electrode. The TiO2 -rNTs bottom layer and PbO2 top layer helped obtain higher film stability, increased working potential window (2.2 V vs. SHE) of the electrode, and the repeatability of the results. The performance of different electrodes based on the precursor solution is found as IL â‰« Pechini > Isopropanol. 4-chlorophenol (4-CP) is used as a model pollutant to test the performance of IL-Ti/TiO2-rNTs/SnO2-Sb/PbO2 anode in an anodic oxidation (AO) coupled electro-Fenton (EF) treatment. Further, the reliability of the electrode is evaluated by mineralizing other persistent organic pollutants (POPs) like tetracyclin, phenol, 2-chlorophenol (2-CP), and 2,4-dichlorophenol (2,4-DCP). Under the optimized conditions, the proposed system was able to mineralize the tetracyclin, phenol, 2-CP, 2,4-DCP, and 4-CP up to 78.91, 82.07, 74.96, 78.78, and 69.3 %, respectively. Moreover, the degradation mechanism of chlorophenols is proposed.

Effect of Lignin Structure Characteristics on the Performance of Lignin Based Phenol Formaldehyde Adhesives.

As the second most abundant biopolymer, lignin remains underutilized in various industrial applications. Various forms of lignin generated from different methods affect its physical and chemical properties to a certain extent. To promote the broader commercial utilization of currently available industrial lignins, lignin sulfonate (SL), kraft lignin (KL), and organosolv lignin (OL) are utilized to partially replace phenol in the synthesis of phenol formaldehyde (PF) adhesives. The impact of lignin production process on the effectiveness of lignin-based phenolic (LPF) adhesives is examined based on the structural analysis of the selected industrial lignin. The results show that OL has more phenolic hydroxyl groups, lower molecular weight, and greater number of reactive sites than the other two types of lignins. The maximum replacement rate of phenol by OL reaches 70% w/w, resulting in organosolv lignin phenolic (OLPF) adhesives with a viscosity of 960 mPa·s, a minimal free formaldehyde content of 0.157%, and a shear strength of 1.84 MPa. It exhibits better performance compared with the other two types of lignin-based adhesives and meets the requirements of national standards.

Selective electrocatalytic transformation of highly toxic phenols in wastewater to para-benzoquinone at ambient conditions.

The selective transformation of organics from wastewater to value-added chemicals is considered an upcycling process beneficial for carbon neutrality. Herein, we present an innovative electrocatalytic oxidation (ECO) system aimed at achieving the selective conversion of phenols in wastewater to para-benzoquinone (p-BQ), a valuable chemical widely utilized in the manufacturing and chemical industries. Notably, 96.4% of phenol abatement and 78.9% of p-BQ yield are synchronously obtained over a preferred carbon cloth-supported ruthenium nanoparticles (Ru/C) anode. Such unprecedented results stem from the weak Ru-O bond between the Ru active sites and generated p-BQ, which facilitates the desorption of p-BQ from the anode surface. This property not only prevents the excessive oxidation of the generated p-BQ but also reinstates the Ru active sites essential for the rapid ECO of phenol. Furthermore, this ECO system operates at ambient conditions and obviates the need for potent chemical oxidants, establishing a sustainable avenue for p-BQ production. Importantly, the system efficacy can be adaptable in actual phenol-containing coking wastewater, highlighting its potential practical application prospect. As a proof of concept, we construct an electrified Ru/C membrane for ECO of phenol, attaining phenol removal of 95.8% coupled with p-BQ selectivity of 73.1%, which demonstrates the feasibility of the ECO system in a scalable flow-through operation mode. This work provides a promising ECO strategy for realizing both phenols removal and valuable organics recovery from phenolic wastewater.

Effect of electronegative atoms on π - π stacking and hydrogen bonding behavior in simple aromatic molecules - An Ab initio MD study.

Ab initio molecular dynamics studies have been performed on fluorobenzene, phenol, and aniline, which have the three most electronegative atoms, fluorine, oxygen, and nitrogen, respectively. Radial distribution functions show strong hydrogen bonding in the phenolic -OH group, whereas it is less prominent in the -NH2 group of aniline. Fluorobenzene does not show strong hydrogen bonds as no solvation shell is found between the fluorine atom and different aromatic hydrogens of the molecule. Spatial distribution functions show that the nitrogen atom of aniline interacts with the aromatic plane, the oxygen atom of phenol is concentrated near the -OH group and fluorobenzene's fluorine atom interacts with the para hydrogen. Liquid phase dimer structures of these systems reveal that perpendicular orientation (Y-shaped) is preferred over parallel ones. Almost half of the total dimer population tends to prefer 90∘±30° angle. H-bond analyses show that fluorobenzene has the longest mean H-bond lifetime for the H-bond between the aromatic hydrogens and the fluorine atoms, whereas the aniline has the least. The mean lifetime between aromatic hydrogens and electronegative atoms increases steadily from aniline to fluorobenzene. Phenolic -OH and amino -NH2 groups show considerably longer mean H-bond lifetime than the aromatic hydrogens. Gas-phase binding energies obtained from quantum chemical calculations show that aniline and phenol dimers have higher binding energy values than the fluorobenzene dimer. Only the phenol dimer shows a perpendicular structure as a stable one, while aniline and fluorobenzene prefer the parallel orientation.

Enhanced removal of phenol and chemical oxygen demand from coking wastewater using micro and nano bubbles: Microbial community and metabolic pathways.

The treatment of coking wastewater with high phenol concentrations has been a challenge for conventional biological treatment technology. In this short communication, phenol-degrading bacteria domesticated by micro and nano bubbles (MNBs) water are used to treat the high- concentration phenol in an MNBs aeration reactor (MNB-AR). The results show that the MNB-AR can greatly improve the removal of phenol and chemical oxygen demand (COD). At a phenol concentration of 1000 mg L-1, the phenol and COD removal rates in the MNB-AR are 55 % and 39 % higher than in the conventional bubble aeration reactor respectively. MNB-AR performs more stably and reaches a higher phenol tolerance under fluctuating high-phenol-concentration loadings. Metagenomic analysis shows that MNBs promote the growth and metabolism of aerobic microorganisms related to phenol degradation, and enhance gene abundance related to carbon metabolism. MNBs aeration combined with microorganisms is an efficient solution for treating coking wastewater.

Potential bioremediation of lead and phenol by sunflower seed husk and rice straw-based biochar hybridized with bacterial consortium: a kinetic study.

Environmental pollution is a global phenomenon and troublesome fact that poses a grave risk to all living entities. Via coupling carbonaceous feedstocks with outstanding microbial activity, kinetic experiments were established using the consortium of Proteus mirabilis and Raoultella planticola, biochar-derived sunflower seed husk (SHB) and rice straw (RSB), and their composites, which investigated at 30 °C (150 rpm) to eliminate 700 mg L-1 lead (120 h) and phenol (168 h) from synthetic wastewater. The derived biochars physicochemical properties of were studied. According to adsorption capacity (qe), consortium-SHB composites and consortium-RSB composites removed lead completely (70 mg g-1) within 48 h and 66 h, respectively. Besides, phenol was remediated entirely after 42 h and 48 h by both composite systems (69.90 mg g-1), respectively, comparing with bacterial consortium only or parent SHB and RSB. Moreover, four kinetic models were studied to describe the bioremediation process. Fractional power and Elovich models could be recommended for describing the adsorption kinetics for lead and phenol removal by the studied biomaterials with high correlation coefficient (R2 ≥ 0.91 for Pb2+ and ≥ 0.93 for phenol) and lower residual root mean square error (RMSE) and chi-square (X2). Overall, bacterial consortium-biochar composites exhibited greater remediation of lead and phenol than the sum of each single bacterial consortium and biochar systems; reflecting synergistic interaction of adsorptive capability of biochar and metabolic performance of bacterial consortium, as denoted by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The current study addressed the successful design of employing functional remediating consortium immobilized on waste biomass-derived biochar as a conducive alternative eco-sorbent and economic platform to detoxify organic and inorganic pollutants.

Adsorption of pyrolysis oil model compound (phenol) with plasma-modified hydro-chars and mechanism exploration.

Phenol is one of the important ingredients of pyrolysis oil, contributing to the high biotoxicity of pyrolysis oil. To promote the degradation and conversion of phenol during anaerobic digestion, cheap hydro-chars with high phenol adsorption capacity were produced. The phenol adsorption capabilities of the plain hydro-char, plasma modified hydro-char at 25 °C (HC-NH3-P-25) and 500 °C (HC-NH3-P-500) were evaluated, and their adsorption kinetics and thermodynamics were explored. Experimental results indicate that the phenol adsorption capability of HC-NH3-P-500 was the highest. The phenol adsorption kinetics of all samples followed the pseudo-second-order equation and interparticle diffusion model, indicating that the adsorption rate of phenol was controlled by interparticle diffusion and chemistry adsorption simultaneously. By DFT calculations, π-π stacking and hydrogen bond are the main interactions for phenol adsorption. It was observed that an enriched graphite N content decreased the average vertical distance between hydro-chars and phenol in π-π stacking complex, from 3.5120 to 3.4532 Å, causing an increase in the negative adsorption energy between phenol and hydro-char from 13.9330 to 23.4181 kJ/mol. For hydrogen bond complex, the average vertical distance decreased from 3.4885 to 3.3386 Å due to the increase in graphite N content; causing the corresponding negative adsorption energy increased from 19.0233 to 19.9517 kJ/mol. Additionally, the presence of graphite N in the hydro-char created a positive diffusion region and enhanced the electron density between hydro-char and phenol. Analyses suggest that enriched graphite N contributed to the adsorption complex stability, resulting in an improved phenol adsorption capacity.

Ion exchange synthesis of copper-based hydroxyapatite for the catalytic degradation of phenol.

Hydroxyapatite (HAP) is a material renowned for its exceptional capabilities in adsorbing and exchanging heavy metal ions, making it a widely employed substance within the environmental domain. This study aims to present a novel material, namely copper-HAP (Cu-HAP), which was synthesized via an ion exchange method. The resulting material underwent comprehensive characterization using scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and Brunauer-Emmett-Teller (BET) analysis. Subsequently, based on the principle of the Fenton-like oxidation reaction, the material was used for the degradation of phenol. The outcomes of the investigation revealed that the optimal preparation conditions for the catalyst were achieved at a temperature of 40 °C, a pH value of 5, and a relative dosage of Cu-HAP at 100 mg/g. Under the reaction conditions of a catalyst dosage of 2 g/L, a 30% hydrogen peroxide concentration of 30 mM, a phenol concentration of 20 mg/L, a pH value of 6, a temperature of 40 °C, and the degradation rate of phenol impressively reached 98.12%. Furthermore, the degradation rate remained at 42.31% even after five consecutive cycles, indicating the promising potential of Cu-HAP in the treatment of recalcitrant organic compounds within this field.

Interaction between preservatives and a monoclonal antibody in support of multidose formulation development.

Multidose formulations have patient-centric advantages over single-dose formats. A major challenge in developing multidose formulations is the prevention of microbial growth that can potentially be introduced during multiple drawings. The incorporation of antimicrobial preservatives (APs) is a common approach to inhibit this microbial growth. Selection of the right preservative while maintaining drug product stability is often challenging. We explored the effects of three APs, 1.1 % (w/v) benzyl alcohol, 0.62 % (w/v) phenol, and 0.42 % (w/v) m-cresol, on a model immunoglobulin G1 monoclonal antibody, termed the "NIST mAb." As measured by hydrogen exchange-mass spectrometry (HX-MS) and differential scanning calorimetry, conformational stability was decreased in the presence of APs. Specifically, flexibility (faster HX) was significantly increased in the CH2 domain (HC 238-255) across all APs. The addition of phenol caused the greatest conformational destabilization, followed by m-cresol and benzyl alcohol. Storage stability studies conducted by subvisible particle (SVP) analysis at 40 °C over 4 weeks further revealed an increase in SVPs in the presence of phenol and m-cresol but not in the presence of benzyl alcohol. However, as monitored by size exclusion chromatography, there was neither a significant change in the monomeric content nor an accumulation of soluble aggregate in the presence of APs.

Applying bottom ash as an alternative Fenton catalyst for effective removal of phenol from aqueous environment.

In this study, coal bottom ash from a thermoelectric plant was tested as an alternative Fenton catalyst for phenol degradation in water. The effect of operating parameters such as initial pH, catalyst dosage and H2O2 concentration were evaluated. The characterization results indicated that the material has a mesoporous structure, with active species (Fe) well distributed on its surface. Under the optimal reaction conditions (6 mM H2O2, 1 g L-1 of catalyst and pH = 3), 98.7% phenol degradation efficiency was achieved in 60 min, as well as 71.6% TOC removal after 150 min. Hydroxyl radical was identified as the main oxidizing agent involved on the cleavage of the phenol molecule. After four consecutive reuse cycles, phenol degradation efficiency was around 80%, indicating good reusability and stability of the catalyst. Therefore, the obtained results demonstrated that the bottom ash presents remarkable activity for application in the Fenton reaction towards phenol degradation.