RÉSUMÉ
The arsenic (As) release from sediments in great lakes is affected by various factors. In this study, the characteristics of As release from sediments was investigated, and the As sources and sinks with the strengths in sediments from different areas (grass-type, algae-type, and grass-algae alternation areas) in great shallow lakes (Taihu Lake, China) were analyzed, and the influence of P competition in the process of As release was also studied. The results showed that changing trend of the values of equilibrium As concentration in sediments were consistent with the regional changes (0 to 28.12 µg/L), and the sediments from algae-type areas had the higher values. The sediments from western lake and northwest lake bay were a strong As and a weak P source, and the north lake bay had the opposite trend of these two regions. Intense P source competition with As from the sediments occurred in algae-type areas. The grass-type areas had strong As and P retention capacities, indicating a sink role of sediment with high As and P sorption capacities. The degree of As and P saturation had similar trend in sediments, and the grass-type areas had the higher values, 18.3%-21.4% and 15.31%-20.34%, respectively. Contribution analysis results showed that most of As release contribution was from the bottom (30-50 cm) sediments, and the surface (0-10 cm) sediments from algae-type areas contributed more to the overlying water than other region.
Sujet(s)
Arsenic , Surveillance de l'environnement , Sédiments géologiques , Lacs , Phosphore , Polluants chimiques de l'eau , Lacs/composition chimique , Phosphore/analyse , Arsenic/analyse , Sédiments géologiques/composition chimique , Polluants chimiques de l'eau/analyse , Chine , PoaceaeRÉSUMÉ
The increased frequency and intensity of heavy rainfall events due to climate change could potentially influence the movement of nutrients from land-based regions into recipient rivers. However, little information is available on how the rainfall affect nutrient dynamics in subtropical montane rivers with complex land use. This study conducted high-frequency monitoring to study the effects of rainfall on nutrients dynamics in an agricultural river draining to Lake Qiandaohu, a montane reservoir of southeast China. The results showed that riverine total nitrogen (TN) and total phosphorus (TP) concentrations increased continuously with increasing rainfall intensity, while TN:TP decreased. The heavy rainfall and rainstorm drove more than 30% of the annual N and P loading in only 5.20% of the total rainfall period, indicating that increased storm runoff is likely to exacerbate eutrophication in montane reservoirs. NO3--N is the primary nitrogen form lost, while particulate phosphorus (PP) dominated phosphorus loss. The main source of N is cropland, and the main source of P is residential area. Spatially, forested watersheds have better drainage quality, while it is still a potential source of nonpoint pollution during rainfall events. TN and TP concentrations were significantly higher at sites dominated by cropland and residential area, indicating their substantial contributions to deteriorating river water quality. Temporally, TN and TP concentrations reached high values in May-August when rainfall was most intense, while they were lower in autumn and winter than that in spring and summer under the same rainfall intensities. The results emphasize the influence of rainfall-runoff and land use on dynamics of riverine N and P loads, providing guidance for nutrient load reduction planning for Lake Qiandaohu.
Sujet(s)
Surveillance de l'environnement , Azote , Phosphore , Pluie , Rivières , Polluants chimiques de l'eau , Phosphore/analyse , Azote/analyse , Chine , Rivières/composition chimique , Polluants chimiques de l'eau/analyse , AgricultureRÉSUMÉ
Tuojiang River Basin is a first-class tributary of the upper reaches of the Yangtze River-which is the longest river in China. As phytoplankton are sensitive indicators of trophic changes in water bodies, characterizing phytoplankton communities and their growth influencing factors in polluted urban rivers can provide new ideas for pollution control. Here, we used direct microscopic count and environmental DNA (eDNA) metabarcoding methods to investigate phytoplankton community structure in Tuojiang River Basin (Chengdu, Sichuan Province, China). The association between phytoplankton community structure and water environmental factors was evaluated by Mantel analysis. Additional environmental monitoring data were used to pinpoint major factors that influenced phytoplankton growth based on structural equation modeling. At the phylum level, the dominant phytoplankton taxa identified by the conventional microscopic method mainly belonged to Bacillariophyta, Chlorophyta, and Cyanophyta, in contrast with Chlorophyta, Dinophyceae, and Bacillariophyta identified by eDNA metabarcoding. In α-diversity analysis, eDNA metabarcoding detected greater species diversity and achieved higher precision than the microscopic method. Phytoplankton growth was largely limited by phosphorus based on the nitrogen-to-phosphorus ratios > 16:1 in all water samples. Redundancy analysis and structural equation modeling also confirmed that the nitrogen-to-phosphorus ratio was the principal factor influencing phytoplankton growth. The results could be useful for implementing comprehensive management of the river basin environment. It is recommended to control the discharge of point- and surface-source pollutants and the concentration of dissolved oxygen in areas with excessive nutrients (e.g., Jianyang-Ziyang). Algae monitoring techniques and removal strategies should be improved in 201 Hospital, Hongrihe Bridge and Colmar Town areas.
Sujet(s)
Surveillance de l'environnement , Phytoplancton , Rivières , Rivières/composition chimique , Chine , Polluants chimiques de l'eau/analyse , Phosphore/analyseRÉSUMÉ
Land use and precipitation are two major factors affecting phosphorus (P) pollution of watershed runoff. However, molecular characterization of dissolved organic phosphorus (DOP) in runoff under the joint influences of land use and precipitation remains limited. This study used Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) to study the molecular characteristics of DOP in a typical P-polluted watershed with spatially variable land use and precipitation. The results showed that low precipitation and intense human activity, including phosphate mining and associated industries, resulted in the accumulation of aliphatic DOP compounds in the upper reaches, characterized by low aromaticity and low biological stability. Higher precipitation and widespread agriculture in the middle and lower reaches resulted in highly unsaturated DOP compounds with high biological stability constituting a higher proportion, compared to in the upper reaches. While, under similar precipitation, more aliphatic DOP compounds characterized by lower aromaticity and higher saturation were enriched in the lower reaches due to more influence from urban runoff relative to the middle reaches. Photochemical and/or microbial processes did result in changes in the characteristics of DOP compounds during runoff processes due to the prevalence of low molecular weight and low O/C bioavailable aliphatic DOP molecules in the upper reaches, which were increasingly transformed into refractory compounds from the upper to middle reaches. The results of this study can increase the understanding of the joint impacts of land use and precipitation on DOP compounds in watershed runoff.
Sujet(s)
Surveillance de l'environnement , Phosphore , Polluants chimiques de l'eau , Phosphore/analyse , Polluants chimiques de l'eau/analyse , Pluie/composition chimique , AgricultureRÉSUMÉ
China's lowland rural rivers are facing severe eutrophication problems due to excessive phosphorus (P) from anthropogenic activities. However, quantifying P dynamics in a lowland rural river is challenging due to its complex interaction with surrounding areas. A P dynamic model (River-P) was specifically designed for lowland rural rivers to address this challenge. This model was coupled with the Environmental Fluid Dynamics Code (EFDC) and the Phosphorus Dynamic Model for lowland Polder systems (PDP) to characterize P dynamics under the impact of dredging in a lowland rural river. Based on a two-year (2020-2021) dataset from a representative lowland rural river in the Lake Taihu Basin, China, the coupled model was calibrated and achieved a model performance (R2>0.59, RMSE<0.04 mg/L) for total P (TP) concentrations. Our research in the study river revealed that (1) the time scale for the effectiveness of sediment dredging for P control was â¼300 days, with an increase in P retention capacity by 74.8 kg/year and a decrease in TP concentrations of 23% after dredging. (2) Dredging significantly reduced P release from sediment by 98%, while increased P resuspension and settling capacities by 16% and 46%, respectively. (3) The sediment-water interface (SWI) plays a critical role in P transfer within the river, as resuspension accounts for 16% of TP imports, and settling accounts for 47% of TP exports. Given the large P retention capacity of lowland rural rivers, drainage ditches and ponds with macrophytes are promising approaches to enhance P retention capacity. Our study provides valuable insights for local environmental departments, allowing a comprehensive understanding of P dynamics in lowland rural rivers. This enable the evaluation of the efficacy of sediment dredging in P control and the implementation of corresponding P control measures.
Sujet(s)
Surveillance de l'environnement , Sédiments géologiques , Phosphore , Rivières , Polluants chimiques de l'eau , Phosphore/analyse , Rivières/composition chimique , Sédiments géologiques/composition chimique , Chine , Polluants chimiques de l'eau/analyse , EutrophisationRÉSUMÉ
Salinity was considered to have effects on the characteristics, performance microbial communities of aerobic granular sludge. This study investigated granulation process with gradual increase of salt under different gradients. Two identical sequencing batch reactors were operated, while the influent of Ra and Rb was subjected to stepwise increments of NaCl concentrations (0-4 g/L and 0-10 g/L). The presence of filamentous bacteria may contribute to granules formed under lower salinity conditions, potentially leading to granules fragmentation. Excellent removal efficiency achieved in both reactors although there was a small accumulation of nitrite in Rb at later stages. The removal efficiencies of chemical oxygen demand (COD), total nitrogen (TN), and total phosphorus (TP) in Ra were 95.31%, 93.70% and 88.66%, while the corresponding removal efficiencies in Rb were 94.19%, 89.79% and 80.74%. Salinity stimulated extracellular polymeric substances (EPS) secretion and enriched EPS producing bacteria to help maintain the integrity and stability of the aerobic granules. Heterotrophic nitrifying bacteria were responsible for NH4+-N and NO2--N oxidation of salinity systems and large number of denitrifying bacteria were detected, which ensure the high removal efficiency of TN in the systems.
Sujet(s)
Bioréacteurs , Azote , Eaux d'égout , Élimination des déchets liquides , Élimination des déchets liquides/méthodes , Bioréacteurs/microbiologie , Eaux d'égout/microbiologie , Phosphore/métabolisme , Salinité , Chlorure de sodium , Bactéries/métabolisme , Microbiote , Analyse de la demande biologique en oxygèneRÉSUMÉ
The multi-soil-layering (MSL) systems is an emerging solution for environmentally-friendly and cost-effective treatment of decentralized rural domestic wastewater. However, the role of the seemingly simple permeable layer has been overlooked, potentially holding the breakthroughs or directions to addressing suboptimal nitrogen removal performance in MSL systems. In this paper, the mechanism among diverse substrates (zeolite, green zeolite and biological ceramsite) coupled microorganisms in different systems (activated bacterial powder and activated sludge) for rural domestic wastewater purification was investigated. The removal efficiencies performed by zeolite coupled with microorganisms within 3 days were 93.8% for COD, 97.1% for TP, and 98.8% for NH4+-N. Notably, activated sludge showed better nitrification and comprehensive performance than specialized nitrifying bacteria powder. Zeolite attained an impressive 89.4% NH4+-N desorption efficiency, with a substantive fraction of NH4+-N manifesting as exchanged ammonium. High-throughput 16S rRNA gene sequencing revealed that aerobic and parthenogenetic anaerobic bacteria dominated the reactor, with anaerobic bacteria conspicuously absent. And the heterotrophic nitrification-aerobic denitrification (HN-AD) process was significant, with the presence of denitrifying phosphorus-accumulating organisms (DPAOs) for simultaneous nitrogen and phosphorus removal. This study not only raises awareness about the importance of the permeable layer and enhances comprehension of the HN-AD mechanism in MSL systems, but also provides valuable insights for optimizing MSL system construction, operation, and rural domestic wastewater treatment.
Sujet(s)
Élimination des déchets liquides , Élimination des déchets liquides/méthodes , Nitrification , Azote/métabolisme , Sol/composition chimique , Dénitrification , Eaux usées/composition chimique , Eaux d'égout/microbiologie , Microbiologie du sol , Zéolites/composition chimique , Phosphore/métabolisme , Bioréacteurs/microbiologie , Bactéries/métabolismeRÉSUMÉ
The land application of livestock manure has been widely acknowledged as a beneficial approach for nutrient recycling and environmental protection. However, the impact of residual antibiotics, a common contaminant of manure, on the degradation of organic compounds and nutrient release in Eutric Regosol is not well understood. Here, we studied, how oxytetracycline (OTC) and ciprofloxacin (CIP) affect the decomposition, microbial community structure, extracellular enzyme activities and nutrient release from cattle and pig manure using litterbag incubation experiments. Results showed that OTC and CIP greatly inhibited livestock manure decomposition, causing a decreased rate of carbon (28%-87%), nitrogen (15%-44%) and phosphorus (26%-43%) release. The relative abundance of gram-negative (G-) bacteria was reduced by 4.0%-13% while fungi increased by 7.0%-71% during a 28-day incubation period. Co-occurrence network analysis showed that antibiotic exposure disrupted microbial interactions, particularly among G- bacteria, G+ bacteria, and actinomycetes. These changes in microbial community structure and function resulted in decreased activity of urease, ß-1,4-N-acetyl-glucosaminidase, alkaline protease, chitinase, and catalase, causing reduced decomposition and nutrient release in cattle and pig manures. These findings advance our understanding of decomposition and nutrient recycling from manure-contaminated antibiotics, which will help facilitate sustainable agricultural production and soil carbon sequestration.
Sujet(s)
Antibactériens , Bétail , Fumier , Microbiologie du sol , Animaux , Sol/composition chimique , Séquestration du carbone , Carbone/métabolisme , Phosphore , Recyclage , Polluants du sol/métabolisme , Bovins , Suidae , Azote/analyse , OxytétracyclineRÉSUMÉ
Nitrogen and phosphorus excretion are major sources of environmental contamination in growing-finishing pig operations. Nutrient excretion can be reduced by feeding pigs daily-tailored diets to their estimated nutrient requirements using individual precision feeding (IPF) techniques. This study modeled and evaluated the environmental impact of moving from conventional group 3-phase feeding (CGF) to IPF systems in Quebec, Canada, using life-cycle assessment with SimaPro software. The cradle-to-farm model included inputs and outputs of each subphase: raw materials/feedstuffs production, feed mill processing, transport, animal rearing, and manure management. The model was identical for both treatments in all aspects except for the production of feeds and barn and manure emissions in the growing-finishing phases. All feed ingredients originated from Quebec, simulating agricultural practices using real management data from an average farm in Quebec. Based on observed pig growth data, the CGF and IPF systems were compared in the growing-finishing phase. IPF diets were modeled as the blend of 2 feeds (i.e., A and B), while CGF diets were stablished according to the industry. The evaluated impact categories were global warming potential (GWP), eutrophication potential (EP), and acidification potential (AP). The functional unit was 1 t of feed at the feed mill gate and 1 t of finished pig live weight at the farm gate. A Monte Carlo analysis determined the uncertainty of the growth performance results. Feeding programs were compared using analysis of variance. Corn was associated with elevated GWP and AP impacts, leading to higher impacts for diets with higher corn content. Feed B, which contained 83% corn, resulted in impacts of 645 kg of CO2-eq., 8.53 kg SO2-eq., and 4.89 kg PO4-eq. Diets with higher EP impact had a higher percentage of soybean meal. Feed A contained 25% of this ingredient and had an impact of 608 kg CO2-eq., 6.98 kg SO2-eq., and 5.57 kg PO4-eq. CGF diets had environmental impacts between those of feeds A and B. Compared to CGF, applying IPF programs during the growing-finishing phase decreased GWP by 7.6%, AP by 16.2% and EP by 13.0%. IPF significantly reduced the environmental impact in all categories through the more efficient use of nutritional resources by pigs. IPF could help to improve the sustainability of growing-finishing pig operations in Quebec and likely other regions using corn and soybean-based diets.
Individual precision feeding (IPF) provides a daily-tailored diet to each animal considering the variation in nutritional requirements among animals and throughout their growth. Thus, this feeding approach contrasts with the traditional group 3-phase feeding system, which provides the same feed for large groups of animals during a long period (e.g., 21 to 28 d). The IPF system has been proven to reduce nitrogen and phosphorous excretion by 30% and 40%, respectively, without compromising growth and while reducing feeding costs. However, understanding the environmental impact of different feeding systems requires a holistic approach. To do so, a life-cycle assessment which is a simulation of emissions taking into consideration the potential emissions from all the production stages that intervene in pig production was performed. Considering the entire production chain, from crop production to the finished pig at the farm gate, makes it possible to quantify the environmental benefits of transitioning from group 3-phase feeding to IPF. This study demonstrated that IPF reduces global warming potential by reducing carbon dioxide equivalent, including gases like nitrous oxide and methane emitted by barns and manure. Similarly, it lessens acidification potential, which impacts plant growth and water quality. Additionally, IPF decreases eutrophication potential by preventing excessive nutrients in water bodies, which cause harmful algal blooms. IPF might successfully lessen the environmental impact because it affects nutrient-use efficiency, which can reduce acidification and eutrophication environmental impacts. In the current scope, the main cause of global warming emissions in pig production is feed production. To minimize the environmental impact of pig production in Quebec, it is important to reduce the inclusion of feed ingredients that have a high environmental impact consumed at an elevated level, particularly corn. This highlights the need for more research into feed ingredients to further enhance the positive environmental effects of new feeding strategies.
Sujet(s)
Aliment pour animaux , Élevage , Régime alimentaire , Animaux , Aliment pour animaux/analyse , Élevage/méthodes , Suidae/croissance et développement , Suidae/physiologie , Québec , Régime alimentaire/médecine vétérinaire , Environnement , Réchauffement de la planète , Fumier/analyse , Eutrophisation , Phosphore/métabolisme , Phosphore/analyseRÉSUMÉ
Research in the field of sediment geochemistry suggests potential linkages between catchment processes (land use), internal phosphorus (P) loading and lake water quality, but evidence is still poorly quantified due to a limited amount of data. Here we address the issues based on a comprehensive data set from 27 lakes in southern Finland. Specifically, we aimed at: 1) elucidating factors behind spatial variations in sediment geochemistry; 2) assessing the impact of diagenetic transformation on sediment P regeneration across lakes based on the changes in the vertical distribution of sediment components; 3) exploring the role of the sediment P forms in internal P loading (IL), and 4) determining the impact of IL on lake water quality. The relationship between sediment P concentration and field area percentage (FA%) was statistically significant in (mainly eutrophic) lakes with catchments that included more than 10 % of fields. We found that sediment iron-bound P (Fe-P) increased with increasing FA%, which agrees with the high expected losses from the cultivated areas. Additionally, populated areas increased the pool of sediment Fe-P. Internal P loading was significantly positively related to both sediment Fe-P and sediment organic P (Org-P). However, Org-P was not significant (as the third predictor) in models that had a trophic state variable as the first predictor and Fe-P as the second predictor. Further, the vertical profiles of sediment components indicated a role of diagenetic transformations in the long-term sediment P release, especially in lakes with deeper maximum depth and longer water residence time. Finally, IL was significantly positively correlated to water quality variables including phytoplankton biomass, its proportion of cyanobacteria, chlorophyll a concentration and trophic state index. Our findings suggest that reduction of P losses from the field and populated areas will decrease internal P loads and increase water quality through a reduced pool of Fe-P.
Sujet(s)
Sédiments géologiques , Lacs , Phosphore , Qualité de l'eau , Phosphore/analyse , Lacs/composition chimique , Sédiments géologiques/composition chimique , Finlande , Polluants chimiques de l'eau/analyse , Surveillance de l'environnementRÉSUMÉ
Pollution control and environmental protection of the Yangtze River have received major attention in China. However, modeling the river's pollution load remains challenging due to limited monitoring and unclear spatiotemporal distribution of pollution sources. Specifically, anthropogenic activities' contribution to the pollution have been underestimated in previous research. Here, we coupled a hydrodynamic-based water quality (HWQ) model with a machine learning (ML) model, namely attention-based Gated Recurrent Unit, to decipher the daily pollution loads (i.e., chemical oxygen demand, COD; total phosphorus, TP) and their sources in the Middle-Lower Yangtze River from 2014 to 2018. The coupled HWQ-ML model outperformed the standalone ML model with KGE values ranging 0.77-0.91 for COD and 0.47-0.64 for TP, while also reducing parameter uncertainty. When examining the relative contributions at the Middle Yangtze River Hankou cross-section, we observed that the main stream and tributaries, lateral anthropogenic discharges, and parameter uncertainty contributed 15, 66, and 19% to COD, and 58, 35, and 7% to TP, respectively. For the Lower Yangtze River Datong cross-section, the contributions were 6, 69, and 25% for COD and 41, 42, and 17% for TP. According to the attention weights of the coupled model, the primary drivers of lateral anthropogenic pollution sources, in descending order of importance, were temperature, date, and precipitation, reflecting seasonal pollution discharge, industrial effluent, and first flush effect and combined sewer overflows, respectively. This study emphasizes the synergy between physical modeling and machine learning, offering new insights into pollution load dynamics in the Yangtze River.
Sujet(s)
Surveillance de l'environnement , Apprentissage machine , Rivières , Qualité de l'eau , Rivières/composition chimique , Chine , Surveillance de l'environnement/méthodes , Pollution de l'eau/analyse , Modèles théoriques , Polluants chimiques de l'eau/analyse , Phosphore/analyse , Analyse de la demande biologique en oxygèneRÉSUMÉ
INTRODUCTION: Acute hepatic failure due to yellow phosphorus rodenticide ingestion is often lethal. This study aimed to analyze demographic characteristics and prognostic indicators, focusing on hyperlactataemia as a potential early indicator of mortality in patients poisoned with yellow phosphorus rodenticide. MATERIALS AND METHODS: This was a retrospective study of 96 patients poisoned with a yellow phosphorus-containing rodenticide (Ratol paste, which contains 3% yellow phosphorus). We examined demographic details, clinical symptoms, and biochemical markers to identify prognostic indicators. RESULTS: Demographics were similar among survivors and non-survivors. Mortality (36.5%) correlated with a higher ingested dose and treatment delays, with a mean (±SD) of 5.26 ± 2.2 survival days among those who died. Symptoms, including gastrointestinal and neurological features, typically appeared 48 h after ingestion. Non-survivors developed increased aminotransferase activities (74.3%), prolonged prothrombin time (65.7%), and hyperbilirubinaemia (65.7%) during hospitalization, significantly more commonly compared to survivors (P < 0.0001). Hyperlactataemia (lactate concentration >2 mmol/L) was present in 97.1% of non-survivors, with increased serial lactate concentrations observed in 88.6%. The median (interquartile range) admission lactate concentration among non-survivors was 4.6 mmol/L (3.36-7.53 mmol/L), and their peak median (interquartile range) lactate concentration was 6.1 mmol/L (8.74-10.6 mmol/L). In non-survivors, an increased lactate concentration preceded increased aminotransferase activities and prolonged prothrombin time. Logistic regression and receiver operating characteristic curve analysis confirmed that a 24 h lactate concentration ≥2.67 mmol/L predicted death with 94.3% sensitivity and 91.8% specificity. DISCUSSION: The majority of patients who ingest yellow phosphorus remain asymptomatic initially and typically present to hospital following the onset of gastrointestinal symptoms, usually a day later. As progression to death occurs within a week of yellow phosphorus ingestion in most cases, determining prognosis as early as possible enables swift referral to a liver transplant centre. Based on our study, a 24 h lactate concentration ≥2.67 mmol/L appears to be an early prognostic indicator of death. In another study, a lactate concentration >5.8 mmol/L was found to be a poor prognostic indicator. CONCLUSIONS: Hyperlactataemia on admission and increased serial lactate concentrations appear to be early poor prognostic signs in patients with yellow phosphorus-induced liver failure.
Sujet(s)
Marqueurs biologiques , Acide lactique , Défaillance hépatique aigüe , Raticides , Centres de soins tertiaires , Humains , Études rétrospectives , Mâle , Femelle , Défaillance hépatique aigüe/induit chimiquement , Défaillance hépatique aigüe/mortalité , Défaillance hépatique aigüe/sang , Adulte d'âge moyen , Pronostic , Adulte , Marqueurs biologiques/sang , Acide lactique/sang , Raticides/intoxication , Phosphore/sang , Phosphore/intoxication , Hyperlactatémie/induit chimiquement , Hyperlactatémie/sang , Sujet âgéRÉSUMÉ
OBJECTIVE: To understand the mineral content of freshwater fish produced in Shaanxi Province and evaluate its related nutritional value. METHODS: According to the 2021 Shaanxi Provincial nutrition monitoring plan, the 9 mineral contents of 13 varieties of freshwater fish, produced in Shaanxi province, were determined by inductively coupled plasma atomic emission spectrometry. The nutritional evaluation of mineral elements was carried out by using the index of nutritional quality(INQ) method. Simultaneously, the correlation between 9 minerals and energy was analyzed by SPSS software. RESULTS: Among the 13 fish species, the contents of P and K were highest, with content ranges of 169-255 and 159-373 mg/100 g, respectively, followed by sodium, calcium, magnesium, iron, zinc. The contents of copper and manganese were lowest. The nutritional evaluation showed that the INQ values of P, K and Mg were than 1, the INQ value of P was highest, which was 4.57-8.72. Some fish have INQ values greater than 1 for calcium, iron, copper and zinc. The correlation between the nine minerals was not strong, as a whole. Only some elements have a correlation coefficient greater than 0.6, indicating that there was a synergistic accumulation effect or antagonistic effect in the fish body. CONCLUSION: The dominant mineral elements in different species of fish were different. However, most fish species can be used as high-quality food sources of phosphorus, potassium, magnesium, copper and zinc.
Sujet(s)
Poissons , Eau douce , Magnésium , Minéraux , Phosphore , Animaux , Chine , Minéraux/analyse , Magnésium/analyse , Phosphore/analyse , Valeur nutritive , Cuivre/analyse , Calcium/analyse , Zinc/analyse , Potassium/analyse , Fer/analyse , Sodium/analyse , Manganèse/analyse , Spectrophotométrie atomique/méthodesRÉSUMÉ
OBJECTIVE: To investigate the nutritional content of edible medicinal materials in mountainous areas of Guizhou Province and compare the comprehensive nutritional value of different varieties. METHODS: A total of 15 kinds of edible herbs were collected from Guizhou Province. According to the national standard, direct drying method, Kjeldahl nitrogen determination method, Soxhlet extraction method, high performance liquid chromatography, inductively coupled plasma mass spectrometry and other detection method were used to determine the content of general nutrients, fat soluble vitamins, minerals and ash. According to the weight ranking of nutritional indexes in principal component analysis and membership function analysis, the quality of 9 kinds of food and drug substances and 6 kinds of Chinese medicinal materials were evaluated and ranked. RESULTS: The eigenvalues of the first 4 principal components were greater than 1, and the cumulative contribution rate was 82.32%. Compared with membership function analysis, the top 5 in comprehensive evaluation were Eucommia, Epimedium and honeysuckle, all of which were food and drug substances. The contents of calcium(851.69 mg/100 g), phosphorus(270.22 mg/100 g) and potassium(1446.48 mg/100 g) were the highest. The contents of carotene(21 963.87 µg/100 g) and vitamin E(57.82 mg/100 g) were the highest in the fat-soluble vitamins of Herbimedium. The contents of various indexes of honeysuckle were relatively high. CONCLUSION: Food and pharmaceutical substances have both medicinal value and nutritional value, and the overall nutritional benefit is higher than that of Chinese medicinal materials.
Sujet(s)
Valeur nutritive , Chine , Plantes médicinales/composition chimique , Plantes comestibles/composition chimique , Analyse d'aliment , Phosphore/analyse , Altitude , Médicaments issus de plantes chinoises/analyse , Minéraux/analyseRÉSUMÉ
OBJECTIVE: To analyze the nutrient composition and nutritional value evaluation of 5 potatoes in Anqing City. METHODS: According to the requirements of the Technical Manual for Food Composition Monitoring Projects, 5 types of potato samples were collected from Anqing City, Anhui Province. National standard detection method were used to determine the nutritional components such as water, ash, protein, fat, dietary fiber, sugar, minerals, vitamins, and amino acids in the samples. The index of nutritional quality(INQ) method was used to evaluate proteins, vitamins, and minerals, and the amino acid scoring standard mode(FAO/WHO mode) was used to evaluate the nutritional value of amino acids. RESULTS: Among the 5 types of potatoes, purple potato had the highest protein(2.3 g/100 g) and dietary fiber content(3.6 g/100 g). Sweet potato(red) had the highest carotene content(4003 µg/100 g), sweet potato(white) had the highest content of vitamin C(15.4 mg/100 g). Sugar in potatoes mainly existed in three forms: fructose, glucose, and sucrose; Purple potatoes had the highest levels of calcium(47 mg/100 g) and phosphorus(74 mg/100 g), respectively. Potatoes(white) had the highest content of potassium(401 mg/100 g), while sweet potatoes(red) had the highest content of magnesium(31 mg/100 g). Sodium(104.0 mg/100 g), iron(0.9 mg/100 g), copper(0.17 mg/100 g), and manganese(0.40 mg/100 g) had the highest content in sweet potatoes(white). The Na/K ratio range of the 5 potato varieties was 0.003-0.456, and the INQ of phosphorus, potassium, magnesium, copper, and manganese were greater than 1. The detection result of 5 potatoes all contain 18 amino acids, and aspartic acid was the highest. The amino acid score(AAS) was 0.29-1.35, and the ratio coefficient(RC) was 0.47-1.69. CONCLUSION: The 5 types of potatoes are rich in dietary fiber, vitamin C and minerals, and belong to the high potassium and low sodium type of food. Potatoes can meet the daily needs of the human body for phosphorus, potassium, magnesium copper, and manganese elements. Lysine is rich in content and can be used as a nutritional supplement for grains. The AAS score and RC are close to 1, and the AAS evaluation mode is closer to the human amino acid composition mode, which can meet the daily needs of the human body for this essential amino acid.
Sujet(s)
Fibre alimentaire , Minéraux , Valeur nutritive , Solanum tuberosum , Solanum tuberosum/composition chimique , Fibre alimentaire/analyse , Chine , Minéraux/analyse , Vitamines/analyse , Analyse d'aliment , Acides aminés/analyse , Acide ascorbique/analyse , Phosphore/analyseRÉSUMÉ
BACKGROUND: There is widespread interest in the design of portable electrochemical sensors for the selective monitoring of biomolecules. Dopamine (DA) is one of the neurotransmitter molecules that play a key role in the monitoring of some neuronal disorders such as Alzheimer's and Parkinson's diseases. Facile synthesis of the highly active surface interface to design a portable electrochemical sensor for the sensitive and selective monitoring of biomolecules (i.e., DA) in its resources such as human fluids is highly required. RESULTS: The designed sensor is based on a three-dimensional phosphorous and sulfur resembling a g-C3N4 hornet's nest (3D-PS-doped CNHN). The morphological structure of 3D-PS-doped CNHN features multi-open gates and numerous vacant voids, presenting a novel design reminiscent of a hornet's nest. The outer surface exhibits a heterogeneous structure with a wave orientation and rough surface texture. Each gate structure takes on a hexagonal shape with a wall size of approximately 100 nm. These structural characteristics, including high surface area and hierarchical design, facilitate the diffusion of electrolytes and enhance the binding and high loading of DA molecules on both inner and outer surfaces. The multifunctional nature of g-C3N4, incorporating phosphorous and sulfur atoms, contributes to a versatile surface that improves DA binding. Additionally, the phosphate and sulfate groups' functionalities enhance sensing properties, thereby outlining selectivity. The resulting portable 3D-PS-doped CNHN sensor demonstrates high sensitivity with a low limit of detection (7.8 nM) and a broad linear range spanning from 10 to 500 nM. SIGNIFICANCE: The portable DA sensor based on the 3D-PS-doped CNHN/SPCE exhibits excellent recovery of DA molecules in human fluids, such as human serum and urine samples, demonstrating high stability and good reproducibility. The designed portable DA sensor could find utility in the detection of DA in clinical samples, showcasing its potential for practical applications in medical settings.
Sujet(s)
Dopamine , Techniques électrochimiques , Dopamine/analyse , Dopamine/urine , Humains , Techniques électrochimiques/méthodes , Techniques électrochimiques/instrumentation , Composés de l'azote/composition chimique , Limite de détection , Soufre/composition chimique , Électrodes , Techniques de biocapteur/méthodes , Graphite/composition chimique , Phosphore/composition chimique , Propriétés de surfaceRÉSUMÉ
An innovative circular economy (CE) system was implemented at the wastewater treatment plant (WWTP) in Brunswick. The performance of the CE system was evaluated for 4 years: the thermal pressure hydrolysis enhanced the methane production by 18% and increased the digestate dewaterability by 14%. Refractory COD formed in thermal hydrolysis and increased the COD concentration in the WWTP effluent by 4 mg L-1 while still complying with the legal threshold. Struvite production reached high phosphorus recovery rates of >80% with a Mg:P molar ratio ≥0.8. Nitrogen was successfully recovered as ammonium sulfate with high recovery rates of 85-97%. The chemical analyses of secondary fertilizers showed a low pollutant content, posing low risks to soil and groundwater ecosystems. The total carbon footprint of the WWTP decreased due to enhanced biogas production, the recovery of renewable fertilizers and a further reduction of nitrous oxide emissions. Using green energy will be crucial to reach carbon neutrality for the entire WWTP.
Sujet(s)
Biocarburants , Eaux d'égout , Eaux d'égout/composition chimique , Carbone/composition chimique , Allemagne , Élimination des déchets liquides/méthodes , Engrais , Eaux usées/composition chimique , Phosphore/composition chimique , Azote/composition chimiqueRÉSUMÉ
The manufacturing of fossil-based fertilizers by extraction of rock phosphate has contributed to carbon emissions and depleted the non-renewable phosphorus reserves. Sewage sludge, which is a waste product from Sewage Treatment Plants (STPs), is rich in phosphorus. The existing techniques for sludge management contribute to carbon emissions and ecological footprint. Struvite (raw fertilizer) and biochar recovery from sludge has emerged as viable methods to reduce carbon emission and ensure economic sustainability of STPs. In this work, the potential for phosphorus recovery and revenue generation is discussed for Rajasthan state in India. The fate of phosphorus and heavy metals in STPs is evaluated which indicates that about 70% of the phosphorus and trace amounts of metals end up in sewage sludge. Further, the power consumption is high in STPs due to industrial wastewater ingress. There is a need to bridge the gap between sewage treatment and generation in Rajasthan, improve STP performance before resource recovery inclusion at policy-level and scale-up. Mixing struvite with biochar can lead to safe application of struvite as raw fertilizer as heavy metals are sequestered by biochar. A business framework is developed to serve as a blueprint and potential model for linking technical and market viability.
Sujet(s)
Composés du magnésium , Phosphates , Phosphore , Eaux d'égout , Struvite , Eaux d'égout/composition chimique , Struvite/composition chimique , Inde , Phosphore/composition chimique , Phosphore/analyse , Phosphates/composition chimique , Composés du magnésium/composition chimique , Engrais/analyse , Précipitation chimique , Charbon de bois/composition chimique , Métaux lourds/analyse , Élimination des déchets liquides/méthodesRÉSUMÉ
Anaerobic co-digestion of source-separated blackwater (BW) and food and kitchen waste (FW) offers decentralized circular economy solutions by enabling local production of biogas and nutrient-rich byproducts. In this study, a 2 m3 pilot-scale continuously stirred tank reactor (CSTR) operated under mesophilic conditions was utilized for co-digestion of BW and FW. The process obtained a CH4 yield of 0.7 ± 0.2 m3/kg influent-volatile solid (VS), reaching a maximum yield of 1.1 ± 0.1 m3/kg influent-VS, with an average organic loading rate of 0.6 ± 0.1 kg-VS/m3/d and HRT of 25 days. The CH4 production rate averaged 0.4 ± 0.1 m3/m3/d, peaking at 0.6 ± 0.1 m3/m3/d. Treatment of digestate through flocculation followed by sedimentation recovered over 90% of ammonium nitrogen and potassium, and 80-85% of total phosphorus in the liquid fraction. This nutrient-rich liquid was used to cultivate Chlorella vulgaris, achieving a biomass concentration of 1.2 ± 0.1 g/L and 85 ± 3% and 78 ± 5% ammonium nitrogen and phosphorus removal efficiency, respectively. These findings not only highlight the feasibility of anaerobic co-digestion of source-separated BW and FW in local biogas production but also demonstrate the potential of microalgae cultivation as a sustainable approach to converting digestate into nutrient-rich algae biomass.
Sujet(s)
Biocarburants , Bioréacteurs , Anaérobiose , Nutriments/métabolisme , Élimination des déchets liquides/méthodes , Aliments , Eaux usées/composition chimique , Phosphore/métabolisme ,RÉSUMÉ
Skeleton bones, distinguished by trabecular and cortical bone tissue content, exhibit varied growth and composition, in response to modified dietary calcium and phosphorus levels. The study investigated how gilts adapt their individual bone and bone region mineralisation kinetics in response to changing intake of Ca and P. A total of 24 gilts were fed according to a two-phase (Depletion (D) 60-95 and Repletion (R) 95-140 kg BW, respectively). During the D phase, gilts were fed either 60% (D60) or 100% (D100) of the estimated P requirement. Subsequently, during the R phase, half of the gilts from each D diet were fed either 100% (R100) or 160% (R160) of the estimated P requirement according to a 2 × 2 factorial arrangement. Bone mineral content (BMC) was assessed in the whole body, individual bones (femur and lumbar spine L2-L4), and bone regions (head, front legs, trunk, pelvis, femur, and hind legs) every 2 weeks using dual-energy X-ray absorptiometry (DXA). At 95 kg BW, gilts fed D60 showed reduced BMC and BMC/BW ratio in all studied sites compared to those fed D100 (P < 0.001). During the depletion phase, the allometric BW-dependent regressions slopes for BMC of D100 gilts remained close to 1 for all sites and did not differ from each other. In contrast, the slopes were lower in D60 gilts (P < 0.05), with an 18% reduction in the whole body, except for the front and hind legs, femur, and pelvis, which exhibited higher reductions (P < 0.05). At 140 kg BW, BMC and BMC/BW ratio of all studied sites were similar in gilts previously fed D60 and D100, but higher in R160 than in R100 gilts (P < 0.05), except for front and hind legs. During the repletion phase, the allometric BW dependent regressions slopes for BMC were lower (P < 0.05) in R100 than in R160 gilts (for whole body -10%; P < 0.01) except for front and hind legs, femur, and pelvis. In conclusion, bone demineralisation and recovery followed similar trends for all measured body sites. However, the lumbar spine region was most sensitive whereas the hind legs were least sensitive. These data suggest that using bone regions such as the head and forelegs that can be collected easily at the slaughterhouse may be a viable alternative to whole body DXA measurement.