Protocol for detecting micro(nano)plastics released from intravenous infusion products.

Approaches for detecting micro(nano)plastics (MNPs) released from intravenous infusion products (IVIPs) are vital for evaluating the safety of both IVIPs and their derived MNPs on human health, yet current understanding is limited. Here, we present a protocol for detecting polyvinyl chloride (PVC) MNPs by combining Raman spectroscopy, scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy (SEM-EDS), and pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). We describe steps for collecting, pretreating, and measuring PVC MNPs released from IVIPs. For complete details on the use and execution of this protocol, please refer to Li et al.1.

Insights into the Binding Interactions between Microplastics and Human α-Synuclein Protein by Multispectroscopic Investigations and Amyloidogenic Oligomer Formation.

Aggregation of human α-synuclein protein is regarded to be a key stage in the etiology of Parkinson's disease and numerous other neurodegenerative illnesses. Microplastics pollution can be a potential agent to promote various neurodegenerative disorders. In this study, we have employed various multispectroscopic analytical methods to investigate the binding interactions between polyethylene (PE-MPs), polyvinyl chloride (PVC-MPs), polystyrene (PS-MPs) microplastics, and human α-synuclein protein. Spectroscopic investigations using UV-vis absorption, circular dichroism, and Fourier transform infrared have indicated different alterations in α-synuclein protein's secondary structures induced by the formation of the α-synuclein protein-MP binding complex. This study suggests that PS-MPs are found to be the most effective microplastic that promote amyloidogenic oligomer emergence because of their tiny size (100 nm).

Polyvinyl chloride and polybutylene adipate microplastics affect peanut and rhizobium symbiosis by interfering with multiple metabolic pathways.

Microplastics (MPs), widely presented in cultivated soil, have caused serious stresses on crop growth. However, the mechanism by which MPs affect legumes and rhizobia symbiosis is still unclear. Here, peanut seedlings were inoculated with Bradyrhizobium zhanjiangense CCBAU 51778 and were grown in vermiculite with 3 %/5 % (w/w) addition of PVC (polyvinyl chloride)-MPs/PBAT (polybutylene adipate)-MPs. PVC-MPs and PBAT-MPs separately decreased nodule number by 33-100 % and 2.62-80.91 %. Transcriptome analysis showed that PVC-MPs affected more DEGs (differentially expressed genes) than PBAT-MPs, indicating PVC-MPs were more devastating for the symbiosis than PBAT-MPs. Functional annotation revealed that PVC-MPs and PBAT-MPs enriched DEGs related to biosynthesis pathways such as flavonoid, isoflavonoid, and phenylpropanoid, in peanut. And when the dose increased from 3 % to 5 %, PVC-MPs mainly enriched the pathways of starch and sucrose metabolism, alanine, aspartate and glutamate metabolism, diterpenoid biosynthesis, etc.; PBAT-MPs enriched cysteine and methionine metabolism, photosynthesis, MAPK signaling, and other pathways. These significantly enriched pathways functioned in reducing nodule number and promoting peanut tolerance to MPs stresses. This study reveals the effect of PVC-MPs and PBAT-MPs on peanut and rhizobium symbiosis, and provides new perspectives for legume production and environmental safety.

Polyvinyl chloride microplastics in the aquatic environment enrich potential pathogenic bacteria and spread antibiotic resistance genes in the fish gut.

Microplastics and antibiotics coexist in aquatic environments, especially in freshwater aquaculture areas. However, as the second largest production of polyvinyl chloride (PVC) in the world, the effects of co-exposure to microplastics particles and antibiotics on changes in antibiotic resistance gene (ARG) profiles and the microbial community structure of aquatic organism gut microorganisms are poorly understood. Therefore, in this study, carp (Cyprinus carpio) were exposed to single or combined PVC microplastic contamination and oxytetracycline (OTC) or sulfamethazine (SMZ) for 8 weeks. PVC microplastics can enrich potential pathogenic bacteria, such as Enterobacter and Acinetobacter, among intestinal microorganisms. The presence of PVC microplastics enhanced the selective enrichment and dissemination risk of ARGs. PVC microplastics combined with OTC (OPVC) treatment significantly increased the abundance of tetracycline resistance genes (1.40-fold) compared with that in the OTC exposure treatment, revealing an obvious co-selection effect. However, compared with those in the control group, the total abundance of ARGs and MGEs in the OPVC treatment groups were significantly lower, which was correlated with the reduced abundances of the potential host Enterobacter. Overall, our results emphasized the diffusion and spread of ARGs are more influenced by PVC microplastics than by antibiotics, which may lead to antibiotic resistance in aquaculture.

The influence of digestive tract protein on cytotoxicity of polyvinyl chloride microplastics.

Microplastics in food and drinking water can enter the human body through oral exposure, posing potential health risks to the human health. Most studies on the toxic effects of microplastics have focused on aquatic organisms, but the effects of the human digestive environment on the physicochemical properties of microplastics and their potential toxicity during gastrointestinal digestion are often limited. In this study, we first studied the influence of interactions between digestive tract protein (α-amylase, pepsin, and trypsin) and microplastics on the activity and conformation of digestive enzymes, and the physicochemical properties of polyvinyl chloride microplastics (PVC-MPs). Subsequently, a simulated digestion assay was performed to determine the biotransformation of PVC-MPs in the digestive tract and the intestinal toxicity of PVC-MPs. The in vitro experiments showed that the protein structure and activity of digestive enzymes were changed after adsorption by microplastics. After digestion, the static contact angle of PVC-MPs was decreased, indicating that the hydrophilicity of the PVC-MPs increased, which will increase its mobility in organisms. Cell experiment showed that the altered physicochemical property of PVC-MPs after digestion process also affect its cytotoxicity, including cellular uptake, cell viability, cell membrane integrity, reactive oxygen species levels, and mitochondrial membrane potential. Transcriptome analyses further confirmed the enhanced biotoxic effect of PVC-MPs after digestion treatment. Therefore, the ecological risk of microplastics may be underestimated owing to the interactions of microplastics and digestive tract protein during biological ingestion.

Hydrophilic catheters for intermittent catheterization and occurrence of urinary tract infections. A retrospective comparative study in patients with spinal cord Injury.

BACKGROUND: Neurogenic bladder dysfunction is a major problem for spinal cord injury (SCI) patients not only due to the risk of serious complications but also because of the impact on quality of life. The main aim of this study is to compare the rate of urinary tract infection (UTI) associated with hydrophilic-coated catheters versus uncoated polyvinyl chloride (PVC) catheters among SCI patients presenting with functional neurogenic bladder sphincter disorders. METHODOLOGY: This was a retrospective cohort study from 2005 to 2020 including adult male or female patients who have an SCI at least more than 1 month ago with neurogenic bladder dysfunction and were using intermittent catheterization (single-use hydrophilic-coated or the standard-of-care polyvinyl chloride uncoated standard catheters) at least 3 times a day to maintain bladder emptying. RESULTS: A total of 1000 patients were selected and recruited through a stratified random sampling technique with 467 (47.60%) patients in the uncoated catheter arm and 524 (52.60%) in the coated catheter groups. The three outcome measures, namely: symptomatic UTI, Bacteriuria, and pyuria were significantly higher in the group using uncoated polyvinyl chloride (PVC) catheters compared to hydrophilic-coated catheters at the rate of 79.60% vs.46.60%, 81.10% vs. 64.69, and 53.57% versus 41.79% respectively. Males, elder patients, longer duration, and severity of SCI were associated with increased risk of symptomatic UTI. CONCLUSIONS: The results indicate a beneficial effect regarding clinical UTI when using hydrophilic-coated catheters in terms of fewer cases of symptomatic UTI. Bacteriuria is inevitable in patients with long-term catheterization, however, treatment should not be started unless the clinical symptoms exist. More attention should be given to the high-risk group for symptomatic UTIs.

Real-time diagnosis and monitoring of biofilm and corrosion layer formation on different water pipe materials using non-invasive imaging methods.

Water distribution networks play a crucial role in ensuring a reliable water supply, yet they encounter challenges such as corrosion, scale formation, and biofilm growth due to interactions with environmental elements. Biofilms and corrosion layers are significant contaminants in water pipes, formed by complex interactions with pipe materials. As the structure of these contamination layers varies depending on the pipe material, it is essential to investigate the contamination layer for each material individually. Specifically, biofilm growth is typically investigated concerning organic sources, while the growth of humus layers is examined in relation to inorganic elements such as manganese (Mn), iron (Fe), and aluminum (Al), which are major elements and organic substances found in water pipes. Real-time imaging of recently contaminated layers can provide important insights to improve system performance by optimizing operations and cleaning processes. In this study, cast iron (7.10 ± 0.78 nm) exhibits greater surface roughness compared to PVC (5.60 ± 0.14 nm) and provides favorable conditions for biofilm formation due to its positive charge. Over a period of 425 h, the fouling layer on cast iron and PVC surfaces gradually increased in fouling thickness, porosity, roughness, and density, reaching maximum value of 29.72 ± 3.6 µm, 11.44 ± 1.1%, 41673 ± 1025.6 pixels, and 0.80 ± 0.3 fouling layer pixel/layer pixel for cast iron, and 8.15 ± 0.4 µm, 20.64 ± 0.9%, 35916.6 ± 755.7 pixels, and 0.58 ± 0.1 fouling layer pixel/layer pixel, respectively. Within the scope of the current research, CNN model demonstrates high correlation coefficients (0.98 and 0.91) in predicting biofilm thickness for cast iron and PVC. The model also presented high accuracy in predicting porosity for both materials (over 0.91 for cast iron and 0.96 for PVC). While the model accurately predicted biofilm roughness and density for cast iron (correlation coefficients 0.98 and 0.94, respectively), it had lower accuracy for PVC (correlation coefficients 0.92 for both parameters).

Biophysical studies of modified PVC sheet based on sunflower oil for antistatic and blood bags applications.

In this work, the surface of polyvinyl chloride PVC sheet was modified by blending it with sunflower seed oil SSO to obtain PVC sheet/SSO films of ratios 100/0, 90/10, 80/20, 70/30, 60/40, and 50/50 (v/v)% using the solution casting method. Various techniques were used to characterize the prepared films, besides the use of hemolysis assays and blood clot formation tests. FTIR spectra revealed that there was a good interaction between the PVC sheet and the oil. The dielectric measurement indicated that SSO addition enhanced the dielectric properties of the sheet. The study of dielectric relaxation times confirmed the interaction between SSO and the sheet. DC conductivity increased to 6 × 10-6 S/m, so it could be applied in antistatic applications. Also, SSO addition increased the value of the thermal stability. According to SEM micrographs, the film was roughened at a ratio of 60/40 and smoothed out at 50/50. This behavior was confirmed with roughness and contact angle measurement results, in which the film of ratio 60/40 had the highest value equal to (72.03°) and then decreased at 50/50 to (59.62°). These results were confirmed by XRD measurement as the crystallinity increased at the film ratio of 60/40 and decreased again at 50/50. Also, the ratio of 60/40 demonstrated a large decrease in thrombus weights along with a slight increase in hemolysis, which is within the acceptable range and has a high degree of biocompatibility, so this concentration is recommended to be used in blood bags applications.

Effects of microplastics on sedimentary greenhouse gas emissions and underlying microbiome-mediated mechanisms: A comparison of sediments from distinct altitudes.

Microplastics (MPs) are emerging contaminants in aquatic ecosystems that can profoundly affect carbon and nitrogen cycling. However, the impact mechanisms of MPs on sedimentary greenhouse gas (GHG) emissions at distinct altitudes remain poorly elucidated. Here, we investigated the effects of polyvinyl chloride (PVC) and polylactic acid (PLA) on sedimentary CO2, CH4, and N2O emissions at distinct altitudes of the Yellow River. PVC increased the relative abundance of denitrifiers (e.g., Xanthobacteriaceae, Rhodocyclaceae) to promote N2O emissions, whereas PLA reduced the abundance of AOA gene and denitrifiers (e.g., Pseudomonadaceae, Sphingomonadaceae), impeding N2O emissions. Both PVC and PLA stimulated the growth of microbes (Saprospiraceae, Aquabacterium, and Desulfuromonadia) associated with complex organics degradation, leading to increased CO2 emissions. Notably, the concurrent inhibition of PLA on mcrA and pmoA genes led to its minimal impact on CH4 emissions. High-altitude MQ sediments, characterized by abundant substrate and a higher abundance of functional genes (AOA, AOB, nirK, mcrA), demonstrated higher GHG emissions. Conversely, lower microbial diversity rendered the low-altitude LJ microbial community more susceptible to PVC, leading to a more significant promotion on GHG emissions. This study unequivocally confirms that MPs exacerbate GHG emissions via microbiome-mediated mechanisms, providing a robust theoretical foundation for microplastic control to mitigate global warming.

Early-Stage Protein Adsorption Sequence on Blood-Contacting Surfaces: Answer to Vroman's Question.

Plasma protein adsorption on blood-contacting surfaces is the initiating significant event and modulates the subsequent coagulation response. Despite decades of research in this area, Vroman's questions in 1986 "Who gets there first?" and "When does the next protein arrive?" remain unanswered due to the lack of detection techniques with sufficient temporal resolution. In this work, we develop a droplet microfluidic technology to detect protein adsorption sequences on six typical blood-contacting surfaces in milliseconds. Apolipoproteins (Apo) are found to be the first proteins to adsorb onto the surfaces in a plasma droplet, and the specific type of apolipoprotein depends on the surface. Apo CI is the first protein adsorbed on gold, platinum, graphene, stainless steel, and polyvinyl chloride with the adsorption time varying from 0.01 to 1 s, while Apo CIII preferentially reaches the titanium alloy surface within 1 s. Subsequent to the initial adsorption, Apo AI, AII, and other proteins continue to adsorb until albumin arrives. Thus, the adsorption sequence is revealed, and Vroman's questions are answered. Moreover, this finding demonstrates the influence of the initial protein adsorption on subsequent coagulation at the surface, and it offers new insights into the development of anticoagulant surfaces.

Comparative effects of polyvinyl chloride microplastics on the brittle star Ophiactis virens and the amphibian Xenopus laevis.

In this study, we investigated the effects of PVC microplastics (PVC-MPs) using two different animal models: the brittle star Ophiactis virens, and the African clawed frog Xenopus laevis. This is the first study using an environmental relevant sample of PVC-MPs obtained through mechanical fragmentation of a common PVC plumbing pipe. Exposure experiments on brittle star were performed on the adult stage for a duration of 14 days, while those on African clawed frog were performed on the embryogenic developmental stage according to the standardized FETAX protocol (Frog Embryo Teratogenesis Assay-Xenopus). For both models, different endpoints were analysed: mortality, developmental parameters, behavioural assays and histological analyses on target organs by optical and electronic microscopy. Results showed that the concentration of 0.1 µg mL-1 PVC do not cause any adverse effects in both models (common NOEC concentration), while exposure to 1 µg mL-1 PVC adversely affected at least one species (common LOEC concentration). In particular arm regeneration efficiency was the most affected parameters in O. virens leading to a significantly lower differentiation pattern at 1 µg mL-1 PVC. On the contrary, in X. laevis larvae histopathological analyses and behavioural tests were the most susceptible endpoints, exhibiting several abnormal figures and different swimming speed at 10 µg mL-1 PVC. Histopathological analyses revealed a higher abundance of degenerating cells, pyknotic nuclei and cellular debris in the gut of exposed larvae in respect to control. The comparative analyses performed in this work allowed to characterize the specificity of action of the PVC-MPs on the two species, underlining the importance of exploring a large spectrum of endpoints to offer adequate protection in the emerging fields of microplastic research.

Mechanism Involved in Polyvinyl Chloride Nanoplastics Induced Anaerobic Granular Sludge Disintegration: Microbial Interaction Energy, EPS Molecular Structure, and Metabolism Functions.

Nanoplastics (NPs) are emerging pollutants and have been reported to cause the disintegration of anaerobic granular sludge (AnGS). However, the mechanism involved in AnGS disintegration was not clear. In this study, polyvinyl chloride nanoplastics (PVC-NPs) were chosen as target NPs and their long-term impact on AnGS structure was investigated. Results showed that increasing PVC-NPs concentration resulted in the inhibition of acetoclastic methanogens, syntrophic propionate, and butyrate degradation, as well as AnGS disintegration. At the presence of 50 µg·L-1 PVC-NPs, the hydrophobic interaction was weakened with a higher energy barrier due to the relatively higher hydrophilic functional groups in extracellular polymeric substances (EPS). PVC-NPs-induced ROS inhibited quorum sensing, significantly downregulated hydrophobic amino acid synthesis, whereas it highly upregulated the genes related to the synthesis of four hydrophilic amino acids (Cys, Glu, Gly, and Lys), resulting in a higher hydrophily degree of protein secondary structure in EPS. The differential expression of genes involved in EPS biosynthesis and the resulting protein secondary structure contributed to the greater hydrophilic interaction, reducing microbial aggregation ability. The findings provided new insight into the long-term impact of PVC-NPs on AnGS when treating wastewater containing NPs and filled the knowledge gap on the mechanism involved in AnGS disintegration by PVC-NPs.

Impact of artificial accelerated ageing of PVC surfaces and surface degradation on disinfectant efficacy.

BACKGROUND: Standardized efficacy surface tests for disinfectants are performed on pristine surfaces. There is a growing interest in understanding the impact of surface ageing on disinfectant activity, owing for example to the increased usage of ultraviolet (UV) radiation and oxidative chemistries for surface decontamination. This acknowledges that general surface 'wear and tear' following UV radiation and oxidative biocide exposure may impact biocidal product efficacy. METHODS: PVC surfaces were aged through thermal and UV-A radiation (340 nm wavelength) following the use of standard ageing surface protocols to simulate natural surface degradation. Surface roughness, contact angle and scanning electron microscopy were performed to evaluate physical changes in PVC surfaces before and after artificial ageing. The efficacy of five pre-impregnated disinfectant wipes were evaluated using the ASTM E2967-15 on stainless-steel (control) and PVC surfaces (aged and non-aged). RESULTS: The type of formulation and the organism tested remained the most significant factors impacting disinfectant efficacy, compared with surface type. Both thermal ageing and UV-A exposure of PVC surfaces clearly showed signs of surface degradation, notably an increase in surface roughness. Physical changes were observed in the roughness of PVC after artificial ageing. A difference in disinfectant efficacy dependent on aged PVC surfaces was observed for some, but not all formulations. CONCLUSION: We showed that surface type and surface ageing can affect biocidal product efficacy, although in a non-predictable manner. More research is needed in this field to ascertain whether surface types and aged surfaces should be used in standardized efficacy testing.

Screening of plant growth-promoting rhizobacteria helps alleviate the joint toxicity of PVC+Cd pollution in sorghum plants.

Combined microplastic and heavy metal pollution (CM-HP) has become a popular research topic due to the ability of these pollutants to have complex interactions. Plant growth-promoting rhizobacteria (PGPR) are widely used to alleviate stress from heavy metal pollution in plants. However, the effects and mechanisms by which these bacteria interact under CM-HP have not been extensively studied. In this study, we isolated and screened PGPR from CM-HP soils and analyzed the effects of these PGPR on sorghum growth and Cd accumulation under combined PVC+Cd pollution through pot experiments. The results showed that the length and biomass of sorghum plants grown in PVC+Cd contaminated soil were significantly lower than those grown in soils contaminated with Cd alone, revealing an enhancement in toxicity when the two contaminants were mixed. Seven isolated and screened PGPR strains effectively alleviated stress due to PVC+Cd contamination, which resulted in a significant enhancement in sorghum biomass. PGPR mitigated the decrease in soil available potassium, available phosphorus and alkali-hydrolyzable nitrogen content caused by combined PVC+Cd pollution and increased the contents of these soil nutrients. Soil treatment with combined PVC+Cd pollution and PGPR inoculation can affect rhizosphere bacterial communities and change the composition of dominant populations, such as Proteobacteria, Firmicutes, and Actinobacteria. PICRUSt2 functional profile prediction revealed that combined PVC+Cd pollution and PGPR inoculation affected nitrogen fixation, nitrification, denitrification, organic phosphorus mineralization, inorganic phosphorus solubilization and the composition and abundance of genes related the N and P cycles. The Mantel test showed that functional strain abundance, the diversity index and N and P cycling-related genes were affected by test strain inoculation and were significant factors affecting sorghum growth, Cd content and accumulation. This study revealed that soil inoculation with isolated and screened PGPR can affect the soil inorganic nutrient content and bacterial community composition, thereby alleviating the stress caused by CM-HP and providing a theoretical basis and data support for the remediation of CM-HP.

Assessment of biodegradation and toxicity of alternative plasticizer di(2-ethylhexyl) terephthalate: Impacts on microbial biofilms, metabolism, and reactive oxygen species-mediated stress response.

Although di(2-ethylhexyl) terephthalate (DOTP) is being widely adopted as a non-phthalate plasticizer, existing research primarily focuses on human and rat toxicity. This leaves a significant gap in our understanding of their impact on microbial communities. This study assessed the biodegradation and toxicity of DOTP on microbes, focusing on its impact on biofilms and microbial metabolism using Rhodococcus ruber as a representative bacterial strain. DOTP is commonly found in mass fractions between 0.6 and 20% v/v in various soft plastic products. This study used polyvinyl chloride films (PVC) with varying DOTP concentrations (range 1-10% v/v) as a surface for analysis of biofilm growth. Cell viability and bacterial stress responses were tested using LIVE/DEAD™ BacLight™ Bacterial Viability Kit and by the detection of reactive oxygen species using CellROX™ Green Reagent, respectively. An increase in the volume of dead cells (in the plastisphere biofilm) was observed with increasing DOTP concentrations in experiments using PVC films, indicating the potential negative impact of DOTP on microbial communities. Even at a relatively low concentration of DOTP (1%), signs of stress in the microbes were noticed, while concentrations above 5% compromised their ability to survive. This research provides a new understanding of the environmental impacts of alternative plasticizers, prompting the need for additional research into their wider effects on both the environment and human health.

Combined effects of micron-sized polyvinyl chloride particles and copper on seed germination of perilla.

Microplastics (MPs) and copper (Cu) pollution coexist widely in cultivation environment. In this paper, polyvinyl chloride (PVC) were used to simulate the MPs exposure environment, and the combined effects of MPs + Cu on the germination of perilla seeds were analyzed. The results showed that low concentrations of Cu promoted seed germination, while medium to high concentrations exhibited inhibition and deteriorated the morphology of germinated seeds. The germination potential, germination index and vitality index of 8 mg • L-1 Cu treatment group with were 23.08%, 76.32% and 65.65%, respectively, of the control group. The addition of low concentration PVC increased the above indicators by 1.27, 1.15, and 1.35 times, respectively, while high concentration addition led to a decrease of 65.38%, 82.5%, and 66.44%, respectively. The addition of low concentration PVC reduced the amount of PVC attached to radicle. There was no significant change in germination rate. PVC treatment alone had no significant effect on germination. MPs + Cu inhibited seed germination, which was mainly reflected in the deterioration of seed morphology. Cu significantly enhanced antioxidant enzyme activity, increased reactive oxygen species (ROS) and MDA content. The addition of low concentration PVC enhanced SOD activity, reduced MDA and H2O2 content. The SOD activity of the Cu2+8 + PVC10 group was 4.05 and 1.35 times higher than that of the control group and Cu treatment group at their peak, respectively. At this time, the CAT activity of the Cu2+8 + PVC5000 group increased by 2.66 and 1.42 times, and the H2O2 content was 2.02 times higher than the control. Most of the above indicators reached their peak at 24 h. The activity of α-amylase was inhibited by different treatments, but ß-amylase activity, starch and soluble sugar content did not change regularly. The research results can provide new ideas for evaluating the impact of MPs + Cu combined pollution on perilla and its potential ecological risk.

Upcycling of PVC waste to high-value sorbent with KOH-activation for efficient removal of organic dyes.

Polyvinyl chloride (PVC), known for its chemical stability and flame-retardant qualities, has many uses in various fields, such as pipes, electric wires, and cable insulation. Research has established its potential recovery as a fluidic fuel through pyrolysis, but the use of PVC pyrolysis oil, which is tainted by chlorine, is constrained by its low heat value and harmful environmental effects. This study engineered a layered double hydroxide (LDH) to tackle these challenges. The LDH facilitated dechlorination during PVC pyrolysis and bolstered thermal stability via cross-linking. During pyrolysis with LDH, PVC was transformed into carbon-rich precursors to sorbents. Chemical activation of these residues using KOH created sorbents with a specific surface area of 1495.4 m2 g⁻1, rendering them hydrophilic. These resulting sorbents displayed impressive adsorption capabilities, removing up to 486.79 mg g⁻1 of methylene blue and exhibiting the simultaneous removal of cations and anions.

A cost-effective and facile technique for realizing fabric based microfluidic channels using beeswax and PVC stencils.

Microfluidic channels fabricated over fabrics or papers have the potential to find substantial application in the next generation of wearable healthcare monitoring systems. The present work focuses on the fabrication procedures that can be used to obtain practically realizable fabric-based microfluidic channels (µFADs) utilizing patterning masks and wax, unlike conventional printing techniques. In this study, comparative analysis was used to differentiate channels obtained using different masking tools for channel patterning as well as different wax materials as hydrophobic barriers. Drawbacks of the conventional tape and candle wax technique were noted and a novel approach was used to create microfluidic channels through a facile and simple masking technique using PVC clear sheets as channel stencils and beeswax as the channel barriers. The resulting fabric based microfluidic channels with varying widths as well as complex microchannel, microwell, and micromixer designs were investigated and a minimum channel width resolution of 500 µm was successfully obtained over cotton based fabrics. Thereafter, the PVC clear sheet-beeswax based microwells were successfully tested to confine various organic and inorganic samples indicating vivid applicability of the technique. Finally, the microwells were used to make a simple and facile colorimetric assay for glucose detection and demonstrated effective detection of glucose levels from 10 mM to 50 mM with significant color variation using potassium iodide as the coloring agent. The above findings clearly suggest the potential of this alternative technique for making low-cost and practically realizable fabric based diagnostic devices (µFADs) in contrast to the other approaches that are currently in use.

Ferroptosis: First evidence in premature duck ovary induced by polyvinyl chloride microplastics.

Ferroptosis is frequently observed in fibrosis and diseases related to iron metabolism disorders in various mammalian organs. However, research regarding the damage mechanism of ferroptosis in the female reproductive system of avian species remains unclear. In this study, Muscovy female ducks were divided into three groups which were given purified water, 1 mg/L polyvinyl chloride microplastics (PVC-MPs) and 10 mg/L PVC-MPs for two months respectively, to investigate the ferroptosis induced by PVC-MPs caused ovarian tissue fibrosis that lead to premature ovarian failure. The results showed that the high accumulation of PVC-MPs in ovarian tissue affected the morphology and functional activity of ovarian granulosa cells (GCs) and subsequently caused the follicular development disorders and down-regulated the immunosignaling of ovarian steroidogenesis proteins 3ß-hydroxysteroid dehydrogenase (3ß-HSD), 17ß-hydroxysteroid dehydrogenase (17ß-HSD), CYP11A1 cytochrome (P450-11A1) and CYP17A1 cytochrome (P450-17A1) suggested impaired ovarian function. In addition, PVC-MPs significantly up-regulated positive expression of collagen fibers, significantly increased lipid peroxidation and malondialdehyde (MDA) level, along with encouraged overload of iron contents in the ovarian tissue were the characteristics of ferroptosis. Further, immunohistochemistry results confirmed that immunosignaling of ferroptosis related proteins Acyl-CoA synthetase (ACSL4), Cyclooxygenase 2 (COX2) and ferritin heavy chain 1 (FTH1) were significantly increased, but solute carrier family 7 member 11 (SLC7A11) and glutathione peroxidase (GPX4) were decreased by PVC-MPs in the ovarian tissue. In conclusion, our study demonstrates that PVC-MPs induced ferroptosis in the ovarian GCs, leading to follicle development disorders and ovarian tissue fibrosis, and ultimately contributing to various female reproductive disorders through regulating the proteins expression of ferroptosis.

N-Acetyl Cysteine-Decorated Nitric Oxide-Releasing Interface for Biomedical Applications.

Biomedical devices are vulnerable to infections and biofilm formation, leading to extended hospital stays, high expenditure, and increased mortality. Infections are clinically treated via the administration of systemic antibiotics, leading to the development of antibiotic resistance. A multimechanistic strategy is needed to design an effective biomaterial with broad-spectrum antibacterial potential. Recent approaches have investigated the fabrication of innately antimicrobial biomedical device surfaces in the hope of making the antibiotic treatment obsolete. Herein, we report a novel fabrication strategy combining antibacterial nitric oxide (NO) with an antibiofilm agent N-acetyl cysteine (NAC) on a polyvinyl chloride surface using polycationic polyethylenimine (PEI) as a linker. The designed biomaterial could release NO for at least 7 days with minimal NO donor leaching under physiological conditions. The proposed surface technology significantly reduced the viability of Gram-negative Escherichia coli (>97%) and Gram-positive Staphylococcus aureus (>99%) bacteria in both adhered and planktonic forms in a 24 h antibacterial assay. The composites also exhibited a significant reduction in biomass and extra polymeric substance accumulation in a dynamic environment over 72 h. Overall, these results indicate that the proposed combination of the NO donor with mucolytic NAC on a polymer surface efficiently resists microbial adhesion and can be used to prevent device-associated biofilm formation.