Well-modulated interfacial ion transport enables D-sorbitol/PEDOT:PSS fibers to sense brain electrophysiological signals in vivo.

A neuroelectrode can be easily prepared using a wet-spun fiber of D-sorbitol/PEDOT:PSS. At a D-sorbitol/PEDOT:PSS weight ratio of 6, the fiber is well-modulated with suitable characters, including the morphology, crystallization, diffusion resistance (179 kΩ), and electric double-layer capacitance (2.72 µF), for sensitive recording of brain activity during somatosensory stimulation and seizures. Additionally, the fiber is highly biocompatible with the brain. This study presents a simple and controllable strategy for the chemical construction of conducting polymer-based neurosensors.

Development of Robust Freeze-Drying Process for Long-Term Stability of rVSV-SARS-CoV-2 Vaccine.

The thermostability of vaccines, particularly enveloped viral vectored vaccines, remains a challenge to their delivery wherever needed. The freeze-drying of viral vectored vaccines is a promising approach but remains challenging due to the water removal process from the outer and inner parts of the virus. In the case of enveloped viruses, freeze-drying induces increased stress on the envelope, which often leads to the inactivation of the virus. In this study, we designed a method to freeze-dry a recombinant vesicular stomatitis virus (VSV) expressing the SARS-CoV-2 spike glycoprotein. Since the envelope of VSV is composed of 50% lipids and 50% protein, the formulation study focused on both the protein and lipid portions of the vector. Formulations were prepared primarily using sucrose, trehalose, and sorbitol as cryoprotectants; mannitol as a lyoprotectant; and histidine as a buffer. Initially, the infectivity of rVSV-SARS-CoV-2 and the cake stability were investigated at different final moisture content levels. High recovery of the infectious viral titer (~0.5 to 1 log loss) was found at 3-6% moisture content, with no deterioration in the freeze-dried cakes. To further minimize infectious viral titer loss, the composition and concentration of the excipients were studied. An increase from 5 to 10% in both the cryoprotectants and lyoprotectant, together with the addition of 0.5% gelatin, resulted in the improved recovery of the infectious virus titer and stable cake formation. Moreover, the secondary drying temperature of the freeze-drying process showed a significant impact on the infectivity of rVSV-SARS-CoV-2. The infectivity of the vector declined drastically when the temperature was raised above 20 °C. Throughout a long-term stability study, formulations containing 10% sugar (sucrose/trehalose), 10% mannitol, 0.5% gelatin, and 10 mM histidine showed satisfactory stability for six months at 2-8 °C. The development of this freeze-drying process and the optimized formulation minimize the need for a costly cold chain distribution system.

Trace sorbitol-modified nano-silica: Towards nano-nucleation for poly(L-lactic acid).

Nucleating agents, especially those with small particle sizes, are preferred to boost the nucleation density and crystallinity of poly(lactic acid) (PLA) due to its weak crystallization capability. Organophilicly modified nanofillers hardly alter the nucleation and crystallinity of non-isothermally crystallized PLA. Herein, nano-silica adsorbed trace D-sorbitol (m-SiO2) as a heterogeneous nucleating agent was melt-mixed with poly(L-lactic acid) (PLLA), and the isothermal and non-isothermal crystallization behavior, as well as crystallization kinetics, were investigated. Transmission electron microscopy (TEM) revealed that m-SiO2 was uniformly dispersed in the PLA matrix as 100-300 nm clusters. Differential scanning calorimetry (DSC) and polarized optical microscopy (POM) showed that the nucleation rate and density of the non-isothermally crystallized PLLA/m-SiO2 composites were significantly improved. Despite the fact that m-SiO2 does not raise the overall non-isothermal crystallization rate, the crystallization temperature and crystallinity of the PLLA/3%m-SiO2 composite increased from 97.2 °C and 6.8 % for neat PLLA to 108.2 °C and 48.6 % (10 °C/min cooling rate), respectively. The Avrami exponent n of isothermal crystallization remains unchanged, while the crystallization rate increases dramatically. Both isothermal and non-isothermal crystallization have increased activation energies. The heat deflection temperature increased from 59 °C of neat PLLA to 152 °C with a 50 % increase in impact strength.

Identification of sorbitol esterification of glutamic acid by LC-MS/MS in a monoclonal antibody stability assessment.

The stability of monoclonal antibodies (mAbs) is vital for their therapeutic success. Sorbitol, a common mAb stabilizer used to prevent aggregation, was evaluated for any potential adverse effects on the chemical stability of mAb X. An LC-MS/MS based analysis focusing on the post-translational modifications (PTMs) of mAb X was conducted on samples that had undergone accelerated aging at 40°C. Along with PTMs that are known to affect mAbs' structure function and stability (such as deamidation and oxidation), a novel mAb PTM was discovered, the esterification of glutamic acid by sorbitol. Incubation of mAb X with a 1:1 ratio of unlabeled sorbitol and isotopically labeled sorbitol (13C6) further corroborated that the modification was the consequence of the esterification of glutamic acid by sorbitol. Levels of esterification varied across glutamic acid residues and correlated with incubation time and sorbitol concentration. After 4 weeks of accelerated stability with isotopically labeled sorbitol, it was found that 16% of the total mAb possesses an esterified glutamic acid. No esterification was observed at aspartic acid sites despite the free carboxylic acid side chain. This study unveils a unique modification of mAbs, emphasizing its potential significance for formulation and drug development.

Innovative food-upcycling solutions: Comparative analysis of edible films from kimchi-extracted cellulose, sorbitol, and citric acid for food packaging applications.

In this study, kimchi-extracted cellulose was utilized to fabricate edible films using a hot synthetic approach, followed by solvent casting, and employing sorbitol and citric acid as the plasticizer and crosslinker, respectively. The chemical, optical, physical, and thermal properties of these films were explored to provide a comparative assessment of their suitability for various packaging applications. Chemical analyses confirmed that the kimchi-extracted cellulose comprised cellulose Iß and amorphous cellulose and did not contain any impurities. Optical analyses revealed that kimchi-extracted cellulose-containing films exhibited better-dispersed surfaces than films fabricated from commercial cellulose. Physical property analyses indicated their hydrophilic characteristics with contact angles <20°. In the thermal analysis, similar Tg results confirmed the comparable thermal stability between films containing commercial microcrystalline cellulose-containing films and kimchi-extracted cellulose-containing films. Edible films produced from kimchi-extracted cellulose through food-upcycling approaches are therefore promising for applications as packaging materials.

Development of starch-rich thermoplastic polymers based on mango kernel flour and different plasticizers.

This work reports on the development of starch-rich thermoplastic based formulations produced by using mango kernel flour, avoiding the extraction process of starch from mango kernel to produce these materials. Glycerol, sorbitol and urea at 15 wt% are used as plasticizers to obtain thermoplastic starch (TPS) formulations by extrusion and injection-moulding processes. Mechanical results show that sorbitol and urea allowed to obtain samples with tensile strength and elongation at break higher than the glycerol-plasticized sample, achieving values of 2.9 MPa of tensile strength and 42 % of elongation at break at 53 % RH. These results are supported by field emission scanning electron microscopy (FESEM) micrographs, where a limited concentration of voids was observed in the samples with sorbitol and urea, indicating a better interaction between starch and the plasticizers. Thermogravimetric analysis (TGA) shows that urea and sorbitol increase the thermal stability of TPS in comparison to the glycerol-plasticized sample. Differential scanning calorimetry (DSC) and dynamic-mechanical-thermal analysis (DMTA) verify the increase in stiffness of the sorbitol and urea plasticized TPS and also illustrate an increase in the glass transition temperature of both samples in comparison to the glycerol-plasticized sample. Glass transition temperatures of 45 °C were achieved for the sample with sorbitol.

Inhibitory effect of thiol compounds on browning precursors and intermediates in sorbitol/glycine system.

BACKGROUND: Sorbitol as a sweetener is often thought to be unable to participate in the Maillard reaction causing browning. However, browning of a system was found to be significant when sorbitol was mixed with glycine and heated. The thiol compounds glutathione and cysteine were added to the system, and the inhibition mechanism of the two on the browning of the system was studied by combining the changes of precursor substances, intermediate products and browning degree. RESULTS: When the concentration of thiol compounds reached 25 mg mL-1, both could make the browning inhibition of the system more than 80%, and the accumulated glucose concentration was reduced to <35% of the control. The production of 3-deoxyglucosone, a precursor of melanoidin, was significantly reduced. CONCLUSION: Glutathione and cysteine directly inhibited the production of substrates in the sorbitol/glycine system, reduced glucose accumulation through competitive consumption and captured highly active intermediates through sulfhydryl groups. This has implications for the browning control of food systems containing sugar alcohols. © 2024 Society of Chemical Industry.

1,5-Anhydro-d-glucitol derivative and galloylated flavonoids isolated from the leaves of Acer ginnala Maxim. as dual inhibitors of PTP1B and α-glucosidase enzymes: In vitro and in silico studies.

Four undescribed compounds (two 1,5-anhydro-d-glucitol derivatives and two galloyl derivatives) and fourteen known compounds were isolated and structurally identified from leaves of Acer ginnala Maxim. (Amur maple). Structures and absolute configurations of the four undescribed compounds were determined using extensive analysis of NMR spectroscopic, HRESI-MS, modified Mosher ester method, and comparison with spectroscopic data of known compounds. Bioactivity evaluation revealed that the isolated 1,5-anhydro-d-glucitol derivative, galloylated flavonol rhamnosides, and galloylated flavanols had inhibitory effects on both protein tyrosine phosphatase-1B (PTP1B, IC50 values ranging of 3.46-12.65 µM) and α-glucosidase (IC50 values ranging of 0.88-6.06 µM) in comparison with a positive control for PTP1B (ursolic acid, IC50 = 5.10 µM) or α-glucosidase (acarbose, IC50 = 141.62 µM). A combination of enzyme kinetic analysis and molecular docking provided additional evidence in favor of their inhibitory activities and mechanism. These data demonstrate that A. ginnala Maxim. together with its constituents are promising sources of potent candidates for developing novel anti-diabetic medications.

Effects of different ratios of mannitol to sorbitol on the functional properties of sweet potato starch films.

Sorbitol as a plasticizer is easily crystallized from starch film, resulting in the reduction in plasticizing effect. To improve the plasticizing performance of sorbitol in starch films, mannitol, an acyclic hexahydroxy sugar alcohol, was used to cooperate with sorbitol. The effects of different ratios of mannitol (M) to sorbitol (S) as a plasticizer on mechanical properties, thermal properties, water resistance and surface roughness of sweet potato starch films were investigated. The results showed that the surface roughness of starch film with M:S (60:40) was the smallest. The number of hydrogen bonds between plasticizer and starch molecule was proportional to the mannitol content starch film. With the decrease of mannitol contents, the tensile strength of starch films gradually decreased except for M:S (60:40). Moreover, the transverse relaxation time value of starch film with M:S (100:0) was the lowest, indicating that it had the lowest degree of freedom of water molecules. Starch film with M:S (60:40) is the most effective in delaying the retrogradation of starch film. This study offered a new theoretical basis that different ratios of mannitol to sorbitol improve different performances of starch films.

A survey on the stabilizing effect of osmolytes on the ultrasound-irradiated lipase for efficient enzymatic hydrolysis of coconut oil.

The stabilizing effect of some osmolytes including betaine, mannitol, proline, sorbitol, and trehalose (each 0.5 M) was investigated on the ultrasound-irradiated (60 kHz and 138 W, for 240 min) lipase by determination of the enzyme half-life time, evaluation of the enzymatic reaction velocity (Vmax), and hydrolysis of coconut oil for production of lauric acid (the main saturated fatty acid of the oil). The enzyme conformational stability was also assessed by circular dichroism (CD) and fluorescence spectroscopy. The average half-life time of mannitol- and sorbitol-treated lipase under the ultrasound irradiation was 511 ± 3 min and 531 ± 2 min, respectively; 3-fold higher than the unirradiated enzyme. The Vmax value of the ultrasound-treated lipase increased from 100 ± 3 nmol min-1 in the absence of osmolyte to 500 ± 7 nmol min-1 and 500 ± 9 nmol min-1 in the presence of mannitol and sorbitol, respectively. CD and fluorescence spectra indicated that mannitol and sorbitol enhanced the rigidity of the lipase molecular conformational structure, increasing the enzyme stability against the ultrasonic field. The ultrasound-irradiated lipase was then used to hydrolyze coconut oil in the absence or presence of the selected osmolytes, which led to liberate 310 ± 6 mg g-1, 413 ± 7 mg g-1, and 420 ± 4 mg g-1 of lauric acid in the absence or presence of sorbitol and mannitol, respectively. In the absence of an ultrasonic field, the non-osmotically-treated lipase was able to liberate only 211 ± 5 mg g-1 of lauric acid. These promising results indicate that sorbitol and mannitol stabilize the structural conformation of lipase under an ultrasonic field which in turn could improve the enzymatic hydrolysis of coconut oil.

Glassy dynamics in polyalcohols: intermolecular simplicity vs. intramolecular complexity.

Using depolarized light scattering, we have recently shown that structural relaxation in a broad range of supercooled liquids follows, to good approximation, a generic line shape with high-frequency power law ω-1/2. We now continue this study by investigating a systematic series of polyalcohols (PAs), frequently used as model-systems in glass-science, i.a., because the width of their respective dielectric loss spectra varies strongly along the series. Our results reveal that the microscopic origin of the observed relaxation behavior varies significantly between different PAs: while short-chained PAs like glycerol rotate as more or less rigid entities and their light scattering spectra follow the generic shape, long-chained PAs like sorbitol display pronounced intramolecular dynamic contributions on the time scale of structural relaxation, leading to systematic deviations from the generic shape. Based on these findings we discuss an important limitation for observing the generic shape in a supercooled liquid: the dynamics that is probed needs to reflect the intermolecular dynamic heterogeneity, and must not be superimposed by effects of intramolecular dynamic heterogeneity.

Can analyte protectants compensate wastewater matrix induced enhancement effects in gas chromatography - mass spectrometry analysis?

This study aimed to investigate the ability of analyte protectants to enhance GC-MS signals and compensate matrix effects for a range of micropollutants in pure standard, effluent, and influent wastewater samples during analysis and detection. Wastewater samples were prepared for analysis using multilayer solid phase extraction for the purpose of extracting sample components with a broad range of physical-chemical properties. The sample extracts were either spiked or not spiked with target compounds and four analyte protectants: 3-ethoxy-1,2-propanediol, D-sorbitol, gluconolactone, and shikimic acid. In this way, it was possible to evaluate the matrix effects of wastewater samples and compare the use of analyte protectants with the conventional correction method of allocating a best matching internal standard to each target compound. A relation was observed between level of wastewater treatment and matrix effects, with the largest effects observed for influent samples and the smallest effects for effluent samples. Compensation of matrix effects with analyte protectants gave comparable results with the conventional correction method of allocating a best matching internal standard to each of the 13 investigated micropollutants. The best overall compensation was observed using analyte protectants and the internal standard correction method in combination.

Electronic skin based on cellulose/KCl/sorbitol organohydrogel.

With the increasing interests in the fields of wearable devices, it is essential yet also challenging to develop electronic skin with customized functionalities, especially for harsh conditions. Herein, by using KCl as both anti-solvent for cellulose regeneration and ionic charge carrier in the cellulose gel network, cellulose/KCl/sorbitol organohydrogel (CKS) combining transparency (over 95% at 550 nm), stretchability (235%), high conductivity (3.88 S/m), and low temperature tolerance (-51.8 °C) was prepared. The CKS based electronic skin achieved simultaneous monitoring of object contact-separation/pressure, stretching/bending and thermal variation, with excellent reliability and stability even in harsh conditions, resembling the human skin with multiply functions. The CKS based electronic skin as efficient human-machine interface was also demonstrated. Furthermore, the CKS based triboelectric nanogenerator delivered a power density of 991 mW/m2, potential as mechanical energy harvesters for wearable devices. We believe the present work will inspire the development of cellulose based skin-like materials and contribute to the comprehensive utilization of naturel polymer in the field of smart devices.

Mitochondria targeting molecular transporters: synthesis, lipophilic effect, and ionic complex.

As mitochondria are potential therapeutic targeting sites for the treatment of human diseases, delivering cytotoxic drugs, antioxidants, and imaging molecules to mitochondria can provide new therapeutic opportunities. In an attempt to develop a new mitochondria-targeting vector, we synthesized sorbitol-based molecular transporters with multiple guanidines, measured their partition coefficients, compared their targeting efficiency using fluorescent images and Pearson's correlation coefficients, and studied cellular uptake mechanisms. To increase the targeting ability of these molecular transporters to mitochondria, alanine-naphthalene as a lipophilic group was attached to the molecular transporter, which improved translocation across cellular membranes and led to higher accumulation in mitochondria. The molecular transporter was able to form an ionic complex with antibiotics, resulting in low cell viability. These data demonstrate that the molecular transporter with a lipophilic group could be utilized as a potential drug delivery vector for treating mitochondrial dysfunction.

Differential effect of polyol and sugar osmolytes on the refolding of homologous alpha amylases: A comparative study.

Polyol and sugar osmolytes are known to enhance the stability of proteins, however, their role in assisting protein folding is not well understood. We asked whether these osmolytes have the same effect during refolding of a pair of thermophilic and mesophilic proteins. Herein, we have chosen α-amylases from Bacillus licheniformis (BLA) and Bacillus amyloliquefaciens (BAA) as thermophilic like and mesophilic counterparts respectively, having similar structures but differing thermostability. The effect of a series of polyols with varying number of -OH groups from 2 to 6 (Ethylene glycol, glycerol, erythritol, xylitol and sorbitol) and sugars (trehalose and sucrose) has been studied on the refolding of BLA and BAA. Our study demonstrates that glycerol, sorbitol and trehalose are the efficient cosolvents for BAA refolding, while comparatively less effective for BLA. Urea induced destabilization of BLA and BAA is differently compensated by polyol and sugar osmolytes during refolding. This suggests that the early species formed during BLA and BAA refolding are differently susceptible towards urea, indicating differential nature of their refolding pathways. Addition of trehalose at different times during refolding showed that the presence of trehalose is essential at the early stages of refolding. It is one of the first systematic study wherein the comparative effect of polyol and sugar assisted refolding of thermophilic and mesophilic protein has been carried out. The study highlights the differential effect of protein-osmolyte interactions during refolding of thermophilic and mesophilic proteins which may have implications in protein formulations, refolding and inhibition of aggregation.

Development and characterization of a novel multifunctional film based on wheat filter flour incorporated with carvacrol: Antibacterial, antifungal, and insecticidal potentials.

Wheat filter flour is a by-product derived from the modern wheat milling process. In this study, the influence of plasticizer type (glycerol (G) and sorbitol (S)) and content (25, 35, and 45 g/100 g polymer) on the wheat filter flour-based film was evaluated. Regardless of plasticizer type, increasing the plasticizer content enhanced moisture content, water solubility, and water vapor permeability of film samples. The S-plasticized films presented the greatest tensile strength and the lowest EAB%. The scanning electron microscope observations confirmed the uniform structure of G-plasticized film. Moreover, antimicrobial and physico-mechanical properties of G-plasticized (25%) film were evaluated at the presence of carvacrol (5 and 10 g/100 g polymer). The considerable improvement was achieved in water affinity (14.2%) and flexibility (8.6%) by incorporating 10% carvacrol in G-plasticized films. The greatest inhibitory properties of active wheat filter flour films were observed against Aspergillus niger. By increasing the carvacrol concentration in film-forming solution, the inhibitory activity against Listeria monocytogenes and Escherichia coli in the liquid food model system was increased by 90.3% and 66.95%, respectively. Moreover, the active wheat filter flour-based film released a considerable insecticidal activity against Sitophilus granarius and Tribolium confusum. This work offers a novel utilization of wheat filter flour as an inexpensive blend polymer to manufacture multifunctional active film, which provides a promising approach for pest management besides enhancing the safety of products.

Thermoplastic starch blown films with improved mechanical and barrier properties.

The development and production of thermoplastic starch (TPS) films based on blown film extrusion have been spurred by increasing interest in renewable resources and an alternative solution to meet industrial-scale demand. The chemical structure of the plasticizer and its proportion have a significant effect on the mechanical and barrier properties of TPS films. Therefore, this research aims to evaluate the influence of plasticizer type and content on the performance of TPS blown films. TPS films were prepared by mixing cassava starch with three types of plasticizer, i.e. glycerol, glycerol/xylitol, and glycerol/sorbitol with a weight ratio of 1:1. The quantity of plasticizer varied among 38, 40, and 42 parts per hundred parts of starch. Although TPS films plasticized with the small-sized plasticizer glycerol were easily processed and extensible, the surface stickiness leading to single-wall films, low tensile strength, and poor water vapor barrier properties would limit their use. By replacing glycerol with larger-sized plasticizers such as xylitol or sorbitol, the films exhibited reduced stickiness and separable double walls and showed improved tensile strength, stiffness, and water vapor and oxygen barrier properties. The obtained TPS blown films offer potential applications as edible films for food and pharmaceutical products.

Preparation and Characterization of Co-Processed Mannitol and Sorbitol Using NanoCrySP Technology.

Particle engineering of excipients, at sub-particulate level using co-processing, can provide high functionality excipients. NanoCrySP technology has been recently explored as a novel approach for the generation of nanocrystalline solid dispersion of poorly soluble drugs, using spray drying process. The purpose of the present study was to generate co-processed mannitol and sorbitol (SD-CSM) using NanoCrySP technology having similar composition to commercial co-processed excipient (Compressol® SM, CP). The characterization of excipients was performed to evaluate their various physicomechanical properties. The sub-micron crystallite size of sorbitol in the matrix of mannitol was determined using the Williamson-Hall equation and Halder-Wagner equation. The reduction in crystallite size of sorbitol and mannitol, lower melting point, and lower heat of fusion of SD-CSM could be responsible for excellent compactibility, better tabletability, and comparable compressibility with respect to CP. This was confirmed by the compressibility-tabletability-compactibility (CTC) profile and Heckel plot analysis. Overall, SD-CSM generated using NanoCrySP technology improved functionalities of excipients over CP and would be useful for direct compression application.

D-Sorbitol Physical Properties Effects on Filaments Used by 3D Printing Process for Personalized Medicine.

Fused filament fabrication (FFF) is a process used to manufacture oral forms adapted to the needs of patients. Polyethylene oxide (PEO) filaments were produced by hot melt extrusion (HME) to obtain a filament suitable for the production of amiodarone hydrochloride oral forms by FFF 3D printing. In order to produce personalized oral forms adapted to the patient characteristics, filaments used by FFF must be controlled in terms of mass homogeneity along filament. This work highlights the relation between filament mass homogeneity and its diameter. This is why the impact of filler excipients physical properties was studied. It has been showed that the particle's size distribution of the filler can modify the filament diameter variability which has had an impact on the mass of oral forms produced by FFF. Through this work it was shown that D-Sorbitol from Carlo Erba allows to obtain a diameter variability of less than 2% due to its unique particle's size distribution. Using the filament produced by HME and an innovating calibration method based on the filament length, it has been possible to carry out three dosages of 125 mg, 750 mg and 1000 mg by 3D printing with acceptable mass uniformity.

Effect of plasticizers on physical, thermal, and tensile properties of thermoplastic films based on Dioscorea hispida starch.

This study examines the effects of varying the concentrations of sorbitol (S) and glycerol (G) on the physical, morphological, thermal, and mechanical properties of Dioscorea hispida, starch-based films. In this context, the films of Dioscorea hispida starch were developed using solution casting technique with glycerol (G), sorbitol (S), and a mixture of sorbitol-glycerol (SG) as plasticizers at the ratios of 0, 30, 45, and 60 wt%. The films' moisture contents were increased when increasing the plasticizer contents. The tensile strengths were decreased, but elongations at break were increased; 7.38%-11.54% for G-plasticized films, 10.17%-15.76% for S-plasticized films, and 14.41%- 16.10% for SG-plasticized films with increasing plasticizer concentrations of the film samples. Varying plasticizer concentrations exhibited a minor effect on the S-plasticized film's thermal properties. Significant decrement in the glass transition temperatures of Dioscorea hispida starch films was observed when the plasticizer contents were raised from 30% to 60%. Significantly, the present work has shown that plasticized Dioscorea hispida starch can be considered a promising biopolymer for the applications of biodegradable films.