Gamma amino butyric acid (GABA) application modulated the morpho-physiological and yield traits of fragrant rice under well-watered and drought conditions.

BACKGROUND: Changing climate is causing erratic rainfall and prolonged drought periods, thus posing serious threats to crop productivity. Owing to severity of drought events, it is imperative to take proactive measures to enhance the resilience of drought sensitive crops like rice. Therefore, the present study was carried out to improve the drought stress tolerance in rice through gamma amino butyric acid (GABA) application. METHODS: The experiment was included four GABA concentrations i.e., 0 mM as control, 1 mM, 1.5 mM, and 2 mM, two water levels i.e., 100% and 50% field capacity (referred as FC100 for well-watered and FC50 for drought conditions, respectively), and two fragrant rice cultivars i.e., Super Basmati and Basmati-515. RESULTS: The findings unveiled a comprehensive improvement in various parameters with GABA application in fragrant rice under both well-watered (FC100) and water-limited (FC50) conditions, compared to the control. Specifically, GABA induced enhancements were observed in plant height, root length, fresh weight, dry weight, total soluble protein content, and total free amino acid content across both cultivars. Moreover, GABA application significantly improved peroxidase (POD) and catalase (CAT) enzyme activities, alongside elevating anthocyanin levels, while concurrently reducing H2O2 contents in both FC100 and FC50 treatments. Furthermore, the positive impact of GABA extended to morphological traits, with notable increases in panicle length, total tillers and productive tillers per hill, branch and grain numbers per panicle, and 1000-grain weight for Super Basmati and Basmati 515 cultivars under both water regimes, compared to Ck. Similarly, the grain yield increased by 31.01% and 27.32% under FC100 and 36.85% and 27.71% under FC50 in Super Basmati and Basmati-515, respectively, in response to GABA application, compared to Ck. Additionally, principal component analysis (PCA) revealed significant variances attributed to Dim1 and Dim2, with 86.1% and 4.0% of the variance, respectively, across three bi-plots encompassing rice cultivars, water levels, and GABA treatments. Notably, all tested indices, except for H2O2 and non-productive tillers per hill, exhibited positive correlations amongst themselves and with rice yield, further emphasizing the beneficial effects of GABA application on fragrant rice under well-watered and drought conditions. CONCLUSIONS: GABA significantly improved fragrant rice performance under both well-watered (FC100) and water-limited (FC50) conditions. Moreover, integrating GABA application into rice cultivation practices could not only improve the crop resilience to drought stress but also potentially benefiting the future food and nutritional security globally. However, however; further research is needed to understand the cellular and molecular mechanisms of the functionality of GABA in fragrant rice, particularly under drought conditions.

A 4-port flexible MIMO antenna with isolation enhancement for wireless IoT applications.

This paper presents a conformal, miniaturized, and geometrically simple monopole antenna designed for Vehicle-to-Everything (V2X) communications. The antenna consists of a flexible substrate, radiating patch, ground, and metallic stubs. Meandered lines are added to the U-shaped radiator to achieve the required bandwidth of the antenna. The antenna has |S11|< -10 dB magnitude from 5.06 to 7.24 GHz, attaining a peak low magnitude of-68 dB. The antenna is configured into a 4-port Multiple-Input-Multiple-Output (MIMO) setup to minimize the mutual coupling between its elements. The proposed flexible MIMO antenna offers bandwidth from 5.37 to 7.34 GHz and a peak moderate gain of 4.63 dBi with omnidirectional stable radiation patterns. To improve the mutual coupling, two hollow concentric circular structures, in combination with a pair of stub networks are integrated between the elements of the MIMO system. The transmission coefficient and surface current analysis confirm the effectiveness of the decoupling structure. The presented MIMO antenna is characterized by high isolation, a low envelope correlation coefficient (ECC), and high diversity gain, suitable for V2X MIMO communication scenarios.

An Electronically Reconfigurable Highly Selective Stop-Band Ultra-Wideband Antenna Applying Electromagnetic Bandgaps and Positive-Intrinsic-Negative Diodes.

In this article, an ultra-wideband (UWB) antenna featuring two reconfigurable quasi-perfect stop bands at WLAN (5.25-5.75 GHz) and lower 5G (3.4-3.8 GHz) utilizing electromagnetic bandgaps (EBGs) and positive-intrinsic-negative (P-I-N) diodes is proposed. A pair of EBG structures are applied to generate sharp notch bands in the targeted frequency spectrum. Each EBG creates a traditional notch, while two regular notches are combined to make a quasi-perfect, sharp, notch band. Four P-I-N diodes are engraved into the EBG structures to enable notch band reconfigurability. By switching the operational condition of the four diodes, the UWB antenna can dynamically adjust its notching characteristics to enhance its adaptability to various communication standards and applications. The antenna can be reconfigured as a UWB (3-11.6 GHz) without any notch band, a UWB with a single sharp notch (either at WLAN or 5G), or a UWB with two quasi-perfect notch bands. Moreover, the antenna's notch bands can also be switched from a traditional notch to a quasi-perfect notch and vice versa. To confirm the validity of the simulated outcomes, the proposed reconfigurable UWB antenna is fabricated and measured. The experimental findings are aligned closely with simulation results, and the antenna offers notch band reconfigurability. The antenna shows a consistently favorable radiation pattern and gain. The dimension of the presented antenna is 20 × 27 × 1.52 mm3 (0.45 λc × 0.33 λc × 0.025 λc, where λc is the wavelength in free space).

A Conformal Tri-Band Antenna for Flexible Devices and Body-Centric Wireless Communications.

A conformal tri-band antenna tailored for flexible devices and body-centric wireless communications operating at the key frequency bands is proposed. The antenna is printed on a thin Rogers RT 5880 substrate, merely 0.254 mm thick, with an overall geometrical dimension of 15 × 20 × 0.254 mm3. This inventive design features a truncated corner monopole accompanied by branched stubs fed by a coplanar waveguide. The stubs, varying in length, serve as quarter-wavelength monopoles, facilitating multi-band functionality at 2.45, 3.5, and 5.8 GHz. Given the antenna's intended applications in flexible devices and body-centric networks, the conformability of the proposed design is investigated. Furthermore, an in-depth analysis of the Specific Absorption Rate (SAR) is conducted using a four-layered human tissue model. Notably, the SAR values for the proposed geometry at 2.45, 3.5, and 5.8 GHz stand at 1.48, 1.26, and 1.1 W/kg for 1 g of tissue, and 1.52, 1.41, and 0.62 W/kg for 10 g of tissue, respectively. Remarkably, these values comfortably adhere to both FCC and European Union standards, as they remain substantially beneath the threshold values of 1.6 W/kg and 2 W/kg for 1 g and 10 g tissues, respectively. The radiation characteristics and performance of the antenna in flat and different bending configurations validate the suitability of the antenna for flexible devices and body-centric wireless communications.

A Compact MIMO Antenna with Improved Isolation for ISM, Sub-6 GHz, and WLAN Application.

This paper presents a compact two-element MIMO antenna with improved isolation for triple-band applications. The antenna consists of two radiating elements with the shared ground plane and a novel decoupling structure. Each antenna element has three stubs with different lengths, which work as quarter-wavelength monopoles to give a triple-band operation. The decoupling system is made by etching various slots in an inverted H-shape stub attached to two quarter-circles at its lower ends. The simulated and measured results show that the antenna operates (|S11| < −10 dB) at the key frequency bands of 2.4 GHz (2.29−2.47 GHz), 3.5 GHz (3.34−3.73 GHz), and 5.5 GHz (4.57−6.75 GHz) with a stable gain and radiation patterns. Moreover, the MIMO antenna shows good isolation characteristics. The isolation is more than 20 dB, the envelope correlation coefficient is <0.003, and diversity gain is 9.98 dB, within the frequency band of interest. Furthermore, the MIMO antenna has a compact size of 48 mm × 31 mm × 1.6 mm. These features of the proposed antenna make it a suitable candidate for I.S.M., 5G sub-6 GHz, and WLAN applications.

Isolation and Gain Improvement of a Rectangular Notch UWB-MIMO Antenna.

This paper presents the performance improvement of a co-planar waveguide rectangularly notched UWB-MIMO antenna. The isolation and gain of the antenna are enhanced by using a parasitic isolator. The antenna consists of four microstrip patch antennas and an isolator. The UWB characteristic of the antenna is achieved by truncating the lower ends of the radiating patch by a semicircle. The rectangular notch characteristic is obtained by adding two electromagnetic bandgap structures on the backside of the antenna, which is attached to the radiator via shorting pin. The performance, especially the decoupling of the MIMO antenna is improved by using a novel parasitic decoupler, which is placed between the antennas to receive uncorrelated signals. The decoupling structure consists of a square shape metallic element with a circular slot inside and a half-semicircle slot edged at each corner. Four rectangular metallic stubs are extended from opposite parallel sides to improve further isolation. The simulated and measured results show that the antenna has a rectangular notch band (5.25-5.85 GHz) across the working band of 3-12.8 GHz. In addition, the antenna has a planar structure with an overall size of 60 × 60 × 1.52 mm3 and offers stable gain, reduced mutual coupling (<-21 dB), and lower envelop correlation (<0.001).

Salinity enhances high optically active L-lactate production from co-fermentation of food waste and waste activated sludge: Unveiling the response of microbial community shift and functional profiling.

Lactic acid (LA), a versatile platform molecule, can be fermented from organic wastes, such as food waste and waste activated sludge. In this study, an efficient approach using salt, a component of food waste as an additive, was proposed to increase LA production. The LA productivity was increased at 10 g NaCl/L and optical pure L-lactate was obtained at 30 g NaCl/L. The enhancement of LA was in accordance with the increased solubilization and the critical hydrolase activities under saline conditions. Moreover, high salinity (30-50 g NaCl/L) changed the common conversion of LA to volatile fatty acids. In addition, the key LA bacteria genera (Bacillus, Enterococcus, Lactobacillus) were selectively enriched under saline conditions. Strong correlations between salinity and functional genes for L-LA production were also observed. This study provides a practical way for the enrichment of L-LA with high optical activity from organic wastes.

A Rectangular Notch-Band UWB Antenna with Controllable Notched Bandwidth and Centre Frequency.

This paper presents the design and realization of a compact ultra-wideband (UWB) antenna with a rectangular notch wireless area network (WLAN) band that has controllable notched bandwidth and center frequency. The UWB characteristics of the antenna are achieved by truncating the lower ends of the rectangular microstrip patch, and the notch characteristics are obtained by using electromagnetic bandgap (EBG) structures. EBGs consist of two rectangular metallic conductors loaded on the back of the radiator, which is connected to the patch by shorting pins. A rectangular notch at the WLAN band with high selectivity is realized by tuning the individual resonant frequencies of the EBGs and merging them. Furthermore, the results show that the bandwidth and frequency of the rectangular notch band could be controlled according to the on-demand rejection band applications. In the demonstration, the rectangular notch band was shifted to X-band satellite communication by tuning the EBG parameters. The simulated and measured results show that the proposed antenna has an operational bandwidth from 3.1-12.5 GHz for |S11| < -10 with a rectangular notch band from 5-6 GHz, thus rejecting WLAN band signals. The antenna also has additional advantages: the overall size of the compact antenna is 16 × 25 × 1.52 mm3 and it has stable gain and radiation patterns.

Development, influencing parameters and interactions of bioplasticizers: An environmentally friendlier alternative to petro industry-based sources.

The current industrial revolution emphasized the necessity to use environmentally friendlier sources and strategies to meet the bio-based economy challenges of the modern world. Owing to the finiteness, human health and environmental impacts of fossil resources, current research efforts are switched to search and develop renewable, sustainable and eco-friendly alternatives of commercial plasticizers to meet the green agenda to establish a green society. The substitution of petroleum-based plasticizers with bioplasticizers offers noteworthy advantages, such as recyclability, biodegradability, high lubricant power, low diffusion coefficients in the polymeric matrix and very low volatility. Moreover, bioplasticizers provide the most suitable platform due to their global availability and industrially-relevant applications. Numerous parameters such as solubility, polarity, and structural compatibility are considered important and can influence the designing of efficient plasticizers. In this context, a plethora of research has given their structural attributes along with their compatibility with different elastomers and plastics. Herein, the valorization of bioplasticizers in several industrial and biotechnological processes is presented with suitable examples. Additionally, it highlights the insight of selection criteria and generalities concerning plasticization theories. A brief discussion is also given on the mechanism of plasticization and modifications, which are being made in the current industrial practices. The description extends towards the design of effective plasticizers with their dependence on structure and how we can improve their performance to the polymer industry.

Nuclear magnetic resonance-based metabolomic investigation reveals metabolic perturbations in PM2.5-treated A549 cells.

Exposure to PM2.5 is associated with an increased risk of lung diseases, and oxidative damage is the main reason for PM2.5-mediated lung injuries. However, little is known about the early molecular events in PM2.5-induced lung toxicity. In the present study, the metabolites in PM2.5-treated A549 cells were examined via a robust and nondestructive nuclear magnetic resonance (NMR)-based metabolic approach to clarify the molecular mechanism of PM2.5-induced toxicity. NMR analysis revealed that 12 metabolites were significantly altered in PM2.5-treated A549 cells, including up-regulation of alanine, valine, lactate, ω-6 fatty acids, and citrate and decreased levels of gamma-aminobutyric acid, acetate, leucine, isoleucine, D-glucose, lysine, and dimethylglycine. Pathway analysis demonstrated that seven metabolic pathways which included alanine, aspartate and glutamate metabolism, aminoacyl-tRNA biosynthesis, taurine and hypotaurine metabolism, arginine and proline metabolism, starch and sucrose metabolism, valine, leucine and isoleucine biosynthesis, and tricarboxylic acid cycle were mostly influenced. Our results indicate that NMR technique turns out to be a simple and reliable method for exploring the toxicity mechanism of air pollutant.

Enantioselective Separation over a Chiral Biphenol-Based Metal-Organic Framework.

A chiral porous 3D metal-organic framework (MOF) is constructed from an enantiopure carboxylate ligand of 1,1'-biphenol, which can be utilized as adsorbent for the separation of aromatic alcohols and sulfoxides with enantioselectivity of up to 99.4%. Single-crystal X-ray diffraction analysis reveals the binding sites and host-guest interactions clearly, providing microscopic insight into the origin of the enantiosorption in the framework.