Oral processing behavior and dental caries; an insight into a new relationship.

INTRODUCTION: Previous evidence suggests an individual variation in the preferred oral processing behavior. Individuals can be classified as firm processing(FPL) or soft processing likers(SPL). FPL(crunchers and chewers) prefer using their teeth while SPL(smooshers and suckers) prefer using the tongue and the palate when processing different food items. Variation in the preferred oral processing behavior has been associated with differences in food texture preference and eating time. Time is one of the factors directly related to the development of dental caries(tooth decay). Oral retention and eating times are associated with greater caries experience. This study aims to explore if a relationship exists between the preferred oral processing behavior and the individual's caries experience. MATERIALS AND METHODS: This was a cross-sectional, dental center-based study conducted at Jordan University of Science and Technology. Five hundred participants consented to fill out the preferred oral processing behavior(POPB) questionnaire. Anthropometric measurements (including weight, height, and waist circumference) were recorded. A single trained and calibrated dentist registered each participant's caries experience and plaque levels using the DMFS index and plaque index of Silness and Loe. RESULTS: A total of 351(70.2%) and 149(29.8%) participants were typed as FPL and SPL, respectively. SPL demonstrated higher levels of dental caries experience compared to FPL. The mean DMFS score for SPL was 28.8(±25.43) while for FPL was 18.71(± 18.34). This difference remained significant after adjustment for confounders(P<0.001). SPL exhibited a significantly higher mean score for the "M" component(P <0.001) while no significant difference in the mean score of the "D"(P = 0.076) and "F"(P = 0.272) components was observed when compared to FPL. CONCLUSION: The current findings provide new insight into a possible relationship between the preferred oral processing behavior and an individual's caries experience. A relationship in which the preferred oral processing behavior can potentially affect and/or be affected by the dental caries experience.

Vestibular Incision Subperiosteal Tunneling Approach (VISTA) with Platelet-Rich Fibrin (PRF) vs VISTA Alone in Multiple Recession Treatment: A Split-Mouth Randomized Clinical Trial.

Gingival recession treatment is one of the major clinical challenges in periodontics, and various surgical techniques have been proposed to correct it. Most of these techniques are suitable for isolated recession sites and involve harvesting an autogenous tissue graft, which increases patient morbidity and might result in inferior esthetics due to incision design. This study assessed the benefit of adding platelet-rich fibrin (PRF) to the vestibular incision subperiosteal tunneling approach (VISTA) in treating multiple gingival recession compared to using VISTA alone. A total of 41 teeth with Miller Class I and II defects were randomized in a split-mouth design. Multiple clinical parameters were tested, including the change in gingival thickness over time, keratinized tissue width, and gingival phenotype (using the transparency of a periodontal probe). Patient-centered outcomes were also assessed via visual analog scale. Multiple Miller Class I and II recessions in the maxilla can be effectively treated with VISTA. However, when used in conjunction with PRF, no significant differences were detected in any parameter. VISTA has been shown to be associated with a low level of postsurgical pain for patients and can be used for patients with high esthetic demands.

Management of interdental papillary defects using subperiosteal hyaluronic acid injection overlay technique: a prospective longitudinal clinical study.

OBJECTIVE: Currently, there is no established treatment protocol to treat interdental papillary loss. This research aimed to evaluate the outcomes of interdental papillary reconstruction using minimally invasive surgery, with injectable hyaluronic acid gel. METHOD AND MATERIALS: Seventeen patients were included, each with five sites of class 1 papillary recession (40 sites in the maxilla and 45 sites in the mandible). Subperiosteal tunneling was performed through a horizontal incision made apical to the base of the papilla without penetrating it. The free gingival sulcus was sealed by 000 retraction cord. A total of 0.2 to 0.6 mL hyaluronic acid was injected gradually. The incision was sutured with polyglycolic sutures. Treated sites underwent clinical and digital evaluation at three follow-up time points (1 month, 3 months, and 6 months). RESULTS: The interdental papillary defect height in the maxillary sites significantly reduced by 60%, 66%, and 42% at 1, 3, and 6 months, respectively. In mandibular sites, the reduction was 54%, 55%, and 40% at the same follow-up time points. Regarding interdental papillary defect surface area in the maxilla, the reduction was 65%, 71%, and 45% at 1, 3, and 6 months. In the mandible, a reduction of 60%, 64%, and 48% was noticed at the same time points. Regarding patients' pain level score, during the day of surgery, 16 patients reported pain; the average pain score out of 10 was 3.94, and 11 patients (64.7%) needed to take analgesics. The pain generally subsided in the following days. At the day of treatment, 12 out of the 17 patients (70.6%) reported mild difficulty in speaking and eating. No complication, hypersensitivity, or allergy was noted in any patient. CONCLUSION: Subperiosteal tunneling with hyaluronic acid injection demonstrates clinical improvements in papilla height and papillary recession surface area reduction after 3 months of follow-up, with reduction in improvement after 6 months. CLINICAL SIGNIFICANCE: Adjunctive use of hyaluronic acid injection with minimally invasive surgery in interdental papillary management may improve clinical and esthetic outcomes.

Management of interdental papillary defects using subperiosteal hyaluronic acid injection overlay technique: a prospective longitudinal clinical study.

OBJECTIVE: Currently, there is no established treatment protocol to treat Interdental papillary loss. This research aimed to evaluate the outcomes of interdental papillary reconstruction using minimally invasive surgery, with injectable hyaluronic acid (HA) gel. MATERIALS AND METHODS: Seventeen patients were included, each with five sites of class 1 papillary recession; (forty sites in the upper jaw and forty-five sites in the lower jaw). Subperiosteal tunneling was performed through a horizontal incision made apical to the base of the papilla without penetrating it. The free gingival sulcus was sealed by 000 retraction cord. After that a total of 0.2-0.6 mL HA was injected gradually. The incision was sutured with polyglycolic sutures. Treated sites underwent clinical and digital evaluation at three follow up time points (1 month, 3 months and 6 months). RESULTS: The interdental papillary defect height in the upper jaw sites significantly reduced by 60%, 66%, and 42% at 1 month, 3 and 6 months, respectively. Also, in lower jaw sites, the reduction was of about 54%, 55%, and 40% at the same follow up time points. Regarding interdental papillary defect surface area in the upper jaw the reduction was about 65%, 71%, and 45% at 1 month, 3 and 6 months. In the lower jaw, a reduction of about 60%, 64%, and 48% was noticed at the same time points. Regarding patients' pain level score, during the day of surgery, sixteen patients reported pain, the average pain score out of 10 was 3.94, and eleven patients (64.7%) needed to take analgesics. The pain generally subsided in the following days. Also, at the day of the treatment twelve out of the seventeen patients (70.6%) reported mild difficulty in speaking and eating. No complication, hypersensitivity or allergy was noted in any patient. CONCLUSION: Subperiosteal tunneling with HA injection demonstrates clinical improvements in papilla height and papillary recession surface area reduction after 3 months of follow-up with reduction in improvement after 6 months.

Comparative analysis of the trueness of linear measurements using direct and indirect scanning protocols compared to actual clinical measurements.

OBJECTIVES: To assess the trueness of digital measurements using direct and indirect scanning approaches compared to the actual clinical measurements. MATERIALS AND METHODS: The crown length, width, and width/length ratio were measured in 36 anterior maxillary teeth using three different methods. The first was clinically using a digital caliper, the second was by scanning the teeth using a digital scanner and the third was by making an impression of the teeth, constructing a stone cast in the lab, and scanning it to obtain digital measurements. Bland-Altman test and intraclass correlation were used to assess the data and make comparisons. RESULTS: Measurements taken using both approaches were highly reliable, with intraclass correlations ranging from 0.934 to 0.977 (p ≤ 0.000). Bland-Altman plot reflected a minimal mean difference between measurements especially in crown width measurements. Crown width/crown length measurement displayed the highest mean difference. CONCLUSIONS: Both direct and indirect optical surface scans showed similar high trueness in linear measurements of teeth. A higher discrepancy was detected in the crown width/length ratio. CLINICAL SIGNIFICANCE: Digital dentistry is the new era in patient management. The use of conventional impression techniques and physical dental casts is associated with several disadvantages. Scanning dental casts to convert physical records into digital ones has multiple advantages. Optical surface scans (digital models) of the dentition are currently being more broadly used and advocated in the different dental disciplines including the construction of surgical guides for esthetic crown lengthening procedures. The trueness and reliability of linear measurements are of paramount importance to allow for proper fit and predictable outcomes. In this study, the trueness of these linear measurements obtained using direct and indirect methods was compared to the actual clinical measurements.

Vestibular Incision Subperiosteal Tunneling Approach (VISTA) with Platelets Rich Fibrin (PRF) vs Vestibular Incision Subperiosteal Tunneling Approach (VISTA) alone in multiple recession treatment. A Split mouth Randomized Clinical Trial.

BACKGROUND: Gingival recession treatment is one of the major clinical challenges in periodontics, various surgical techniques were proposed to correct it. Most of these techniques are suitable for isolated recession sites and involve the harvesting of autogenous tissue graft; which increase patient morbidity and might result in inferior esthetics due to incision design. This study assessed the benefit of adding Platelets Rich Fibrin (PRF) to Vestibular Incision Subperiosteal Tunneling Approach (VISTA) in treating multiple gingival recession compared to using VISTA alone. Forty-one teeth with Miller Class I/II were randomized in a split mouth design. Multiple clinical parameters were tested including the change in gingival thickness over time, keratinized tissue width KTW and the gingival phenotype using the transparency of periodontal probe. Patient-centered outcomes were also assessed via Visual Analogue Scale VAS. CONCLUSION: Multiple Miller Class 1 and Class 2 recessions in the maxilla can be effectively treated with VISTA. However, when used in conjunction with PRF no significant differences were detected in any parameter. VISTA has been shown to be associated with a low level of pain for patients following surgery and can be used for patients with high esthetic demand.

Three-dimensional cultures of gingival fibroblasts on fibrin-based scaffolds for gingival augmentation: A proof-of-concept study.

OBJECTIVE: Gingival tissue regeneration is associated with several challenges. Tissue engineering regenerates the different components of the tissues, providing three major elements: living cells, appropriate scaffolds, and tissue-inducing substances. This study aimed to regenerate the gingival connective tissue in vitro, using human gingival fibroblasts cultured in three-dimensional fibrin gel scaffolds. DESIGN: Human gingival fibroblasts were seeded in a novel three-dimensional fibrin gel scaffold and maintained in two media types: platelet lysate media (control) and collagen-stimulating media (test). Cellular viability and proliferation were assessed, and the production of collagen and other extracellular matrix components in these constructs was investigated and compared. RESULTS: Human gingival fibroblasts cultured in three-dimensional cultures were metabolically active and proliferated in both media. Furthermore, histologic sections, scanning electron microscopy, and quantitative polymerase chain reaction confirmed the production of higher levels of collagen and other extracellular matrix fibers in three-dimensional constructs cultured in collagen-stimulating media. CONCLUSIONS: Culturing human gingival fibroblasts in a novel three-dimensional fibrin gel scaffold containing collagen-stimulating media resulted in a tissue-equivalent construct that mimics human gingival connective tissue. The impact of these results should be considered for further investigations, which may help to develop a compatible scaffold for gingival soft tissue regeneration and treatment of mucogingival deformities.

CBCT Compared to Transgingival Probing as a Tool for Estimating Alveolar Bone Crest Level in Patients with Altered Passive Eruption.

OBJECTIVES: Alveolar bone crest level is essential in determining the need for bone removal in subjects with altered passive eruption (APE). This study assessed the validity of Cone Beam Computed Tomography (CBCT) and transgingival probing. METHODS: Patients presenting with APE were assessed. Transgingival probing was performed to clinically assess the distance between the cementoenamel junction (CEJ) and the crest of the bone at the mid-point of upper anterior teeth. CBCT was used to assess this distance at the same point. Upon reflection of a full mucoperiosteal flap the actual distance was measured. RESULTS: Similar actual and CBCT measurements of the distance between the CEJ and bone crest at upper right 3, upper left 2 and upper left 3 (P>0.05) were recorded. However, in upper right 2, upper right 1 and upper left 1 the distance was significantly greater on CBCT (P<0.05). No significant difference was detected between transgingival probing and the actual distance at all teeth assessed. CONCLUSIONS: Careful transgingival probing provides an accurate measure of the distance between the CEJ and crest of the Bone. CBCT gives an accurate estimate, However, it might not be justified for each patient in the presence of safer methods.

Determining the periodontal phenotype-Probe transparency versus actual: A diagnostic study.

AIMS: Assessment of the validity of the transparency of the periodontal probe as a tool for determining the periodontal phenotype. MATERIALS AND METHODS: The periodontal phenotype was assessed at the six upper anterior teeth of 75 subjects using two methods. One is through assessing the transparency of the periodontal probe upon insertion into the gingival sulcus. The second method was through the assessment and clustering of the width of keratinized gingiva clinically and the gingival and buccal plate thickness on Cone Beam Computed Tomography scan. RESULTS: The probe transparency approach correctly identified thick periodontal phenotype in most cases (41 out of 43 [95%]). However, this was not the case for thin periodontal phenotype; probe transparency approach identified 64% of the thin sites (261 out of 407) and misclassified nearly one third of the patients. CONCLUSION: The probe transparency approach is a valid approach in identifying the phenotype in subjects with thick phenotype but not in subjects with thin phenotype. CLINICAL SIGNIFICANCE: The definition of periodontal phenotype has recently changed. Accurate designation has been shown to affect treatment outcomes especially esthetic ones in different disciplines of dentistry. Probe transparency is commonly used by clinicians and researchers. Assessment of the validity of this method based on the most recent definition and compared to actual assessment of bone and gingival thickness is of great clinical value.

The use of diode laser in esthetic crown lengthening: a randomized controlled clinical trial.

This clinical trial assessed patient comfort, satisfaction, and the achievement and maintenance of ideal gingival margin levels using laser compared to conventional surgery in sculpting the soft tissues during esthetic crown lengthening. Eighteen patients with altered passive eruption were treated in a randomized split-mouth design by laser or scalpel crown-lengthening surgery. Patients were evaluated for intra- and postoperative pain and bleeding at 3 and 7 days. Clinical parameters including clinical crown length, probing depth, plaque index, bleeding on probing, and clinical attachment level were recorded at baseline, 3 and 6 months postoperatively. A gradual reduction in postoperative pain was recorded for both sides with no statistically significant difference at 3 (scalpel: 4.4 ± 1.33, laser: 4.8 ± 1.34; p = 0.088) and 7 days (scalpel: 1.8 ± 0.94, laser: 1.8 ± 1.10; p = 0.655). A statistically significant gain of coronal tooth structure was observed at 1, 3, and 6 months. Stability in the post-crown-lengthening level of the gingival margin was achieved one month following the procedure with no significant changes in the following months. All patients reflected acceptable results based on clinical evaluation and patient-reported outcomes. The diode laser can be used effectively as an alternative to the scalpel for the management of altered gingival contour. CLINICAL SIGNIFICANCE : This study demonstrated that a diode laser is an effective tool for the management of cases with altered passive eruption. In addition, it gives insight to practitioners regarding the timing of esthetic restorative procedures and emphasizes the preservation of the gingival complex dimensions.

The effect of orthodontic treatment on the periodontium and soft tissue esthetics in adult patients.

OBJECTIVE: Most patients seek orthodontic treatment to achieve an esthetic outcome. Orthodontic treatment has possible negative sequelae. The aim of this study is to assess these possible effects on the periodontium and tissue esthetics. METHODS: One hundred fifty-six patients who have completed orthodontic treatment at Jordan University of Science and Technology clinics were recruited. They were divided into extraction and nonextraction subgroups. Another 155 patients never undergoing orthodontic treatment were assessed. The height of papilla, width of keratinized gingiva, gingival recession, degree of tooth display, smile line, crestal bone level, and proximal caries were assessed. Chi- square test was used for categorical/discrete variables while independent t-test was used for continuous variables. The level of significance was set at (p ≤ 0.05). RESULTS: The mean age was 22 years with no significant difference between the groups. There was a significant difference between "ortho" and "nonortho" groups in tooth display and keratinized gingiva (p = 0.006 and <0.001, respectively). The overall crestal bone level, smile line, recession, and papilla fill did not show any significant differences (p = 0.200, 0.067, 0.120, and 0.066, respectively). The crestal bone level in the upper and lower anterior segments was significantly lower in the "ortho" treated group compared to the "nonortho" treated group (p = 0.002 and 0.005, respectively). A significant difference between "extraction" and "nonextraction" groups was in the width of keratinized gingiva (p = 0.003) and the number of teeth displayed (p < 0.001). Despite reaching statistical significance these differences are not necessarily of clinical significance. CONCLUSION: Orthodontic treatment clearly affects the periodontal tissues; however, the detrimental effects appear to be minimal. Patients with history of orthodontic treatment might have lower crestal bone levels at certain sites and this should not be confused with periodontal disease.

Dimensional Changes in Alveolar Ridge Following Extraction of Teeth in the Maxillary Premolar Area in Subjects with Thick and Thin Gingival Biotypes: A Pilot Study.

This study investigated changes in residual ridge dimensions after tooth extraction among thin and thick gingival biotypes. Fifteen patients who required extraction of maxillary premolars were classified according to gingival biotypes (10 teeth in 9 participants were included in the thick group, and 6 teeth in 6 participants were included in the thin group). Minimally traumatic extractions were carried out using periotomes and rotational movement of teeth. At the time of extraction an osteometer was used to measure the thickness of the labial plate and the bony alveolar ridge at the extraction site by penetrating the tissues until bone was reached 5 mm, 7 mm, and 10 mm below the midpoint of the crest of the facial and palatal gingival margins. Standardized radiographs were taken immediately and after 3 months. The results of this study show minimal differences in dimensional changes following extraction of premolar teeth in thick and thin gingival biotypes. Significantly greater bone loss was detected in both gingival biotypes when the labial plate thickness was less than 1.5 mm, especially in alveolar ridge height.

Alveolar bone density changes around miniscrews: a prospective clinical study.

INTRODUCTION: Our objective was to assess the effects of miniscrews on interproximal alveolar bone density and adjacent gingival tissue health. METHODS: Forty-four titanium miniscrews were inserted between maxillary second premolars and first molars on both sides of the dentition in 22 consecutive patients (15 female, 7 male; ages, 14-24 years). A control area (between the maxillary first and second premolars) was also assessed. Both miniscrew (study) and control areas were monitored clinically and radiographically at different time points: before insertion of the miniscrews and at 1 month, 3 months, and 6 months after insertion. Software associated with a digital intraoral radiography machine was used to assess changes in alveolar bone density. Clinical gingival parameters of the study and control areas were also recorded. A repeated-measures analysis of variance and the Bonferroni post-hoc pairwise comparison tests were used to assess the changes at the different time points. RESULTS: Thirty-nine miniscrews were successful for the study duration. Male subjects had significantly (P <0.001) higher alveolar bone density than did the females at baseline. Alveolar bone density around the miniscrews increased significantly (P <0.001) between 3 and 6 months after insertion upon loading. Alveolar bone density of the control area did not change significantly during the experiment (P >0.05). The width of keratinized gingiva increased significantly (P <0.001) in the study and control areas after insertion of miniscrews and remained with no significant change throughout the study. CONCLUSIONS: Miniscrews increased the alveolar bone density significantly after 3 months of insertion and were not associated with detrimental effects on the adjacent gingival tissues.