Preservation of memory B cell homeostasis in an individual producing broadly neutralising antibodies against HIV-1.

Immunological determinants favouring emergence of broadly neutralising antibodies are crucial to the development of HIV-1 vaccination strategies. Here, we combined RNAseq and B cell cloning approaches to isolate a broadly neutralising antibody (bnAb) ELC07 from an individual living with untreated HIV-1. Using single particle cryogenic electron microscopy (cryo-EM), we show that the antibody recognises a conformational epitope at the gp120-gp41 interface. ELC07 binds the closed state of the viral glycoprotein causing considerable perturbations to the gp41 trimer core structure. Phenotypic analysis of memory B cell subsets from the ELC07 bnAb donor revealed a lack of expected HIV-1-associated dysfunction, specifically no increase in CD21-/CD27- cells was observed whilst the resting memory (CD21+/CD27+) population appeared preserved despite uncontrolled HIV-1 viraemia. Moreover, single cell transcriptomes of memory B cells from this bnAb donor showed a resting memory phenotype irrespective of the epitope they targeted or their ability to neutralise diverse strains of HIV-1. Strikingly, single memory B cells from the ELC07 bnAb donor were transcriptionally similar to memory B cells from HIV-negative individuals. Our results demonstrate that potent bnAbs can arise without the HIV-1-induced dysregulation of the memory B cell compartment and suggest that sufficient levels of antigenic stimulation with a strategically designed immunogen could be effective in HIV-negative vaccine recipients.

Structural and functional insights into the mechanism of action of plant borate transporters.

Boron has essential roles in plant growth and development. BOR proteins are key in the active uptake and distribution of boron, and regulation of intracellular boron concentrations. However, their mechanism of action remains poorly studied. BOR proteins are homologues of the human SLC4 family of transporters, which includes well studied mammalian transporters such as the human Anion Exchanger 1 (hAE1). Here we generated Arabidopsis thaliana BOR1 (AtBOR1) variants based (i) on known disease causing mutations of hAE1 (S466R, A500R) and (ii) a loss of function mutation (D311A) identified in the yeast BOR protein, ScBOR1p. The AtBOR1 variants express in yeast and localise to the plasma membrane, although both S466R and A500R exhibit lower expression than the WT AtBOR1 and D311A. The D311A, S466R and A500R mutations result in a loss of borate efflux activity in a yeast bor1p knockout strain. A. thaliana plants containing these three individual mutations exhibit substantially decreased growth phenotypes in soil under conditions of low boron. These data confirm an important role for D311 in the function of the protein and show that mutations equivalent to disease-causing mutations in hAE1 have major effects in AtBOR1. We also obtained a low resolution cryo-EM structure of a BOR protein from Oryza sativa, OsBOR3, lacking the 30 C-terminal amino acid residues. This structure confirms the gate and core domain organisation previously observed for related proteins, and is strongly suggestive of an inward facing conformation.

Transfer of stabilising mutations between different secondary active transporter families.

Integral membrane transporters play essential roles in the movement of substrates across biological membranes. One approach to produce transporters suitable for structural studies is to introduce mutations that reduce conformational flexibility and increase stability. However, it can be difficult to predict which mutations will result in a more stable protein. Previously, we stabilised the uric acid-xanthine transporter, UapA, a member of the SLC23 family, through introduction of a single-point mutation, G411V, trapping the protein in the inward-facing conformation. Here, we attempted to stabilise the structurally related BOR1 transporter from Arabidopsis thaliana, a member of the SLC4 family, by introducing the equivalent substitution. We identified possible residues, P362 and M363, in AtBOR1, likely to be equivalent to the G411 of UapA, and generated four mutants, P362V or L and M363F or Y. Stability analysis using heated Fluorescent Size Exclusion Chromatography indicated that the M363F/Y mutants were more stable than the WT AtBOR1 and P362V/L mutants. Furthermore, functional complementation analysis revealed that the M363F/Y mutants exhibited reduced transport activity compared to the P362V/L and WT proteins. Purification and crystallisation of the M363F/Y proteins yielded crystals that diffracted better than WT (5.5 vs 7 Å). We hypothesise that the increased bulk of the F and Y substitutions limits the ability of the protein to undergo the conformational rearrangements associated with transport. These proteins represent a basis for future studies on AtBOR1.

Transporter oligomerization: form and function.

Transporters are integral membrane proteins with central roles in the efficient movement of molecules across biological membranes. Many transporters exist as oligomers in the membrane. Depending on the individual transport protein, oligomerization can have roles in membrane trafficking, function, regulation and turnover. For example, our recent studies on UapA, a nucleobase ascorbate transporter, from Aspergillus nidulans, have revealed both that dimerization of this protein is essential for correct trafficking to the membrane and the structural basis of how one UapA protomer can affect the function of the closely associated adjacent protomer. Here, we review the roles of oligomerization in many particularly well-studied transporters and transporter families.

Band 3, the human red cell chloride/bicarbonate anion exchanger (AE1, SLC4A1), in a structural context.

The crystal structure of the dimeric membrane domain of human Band 3(1), the red cell chloride/bicarbonate anion exchanger 1 (AE1, SLC4A1), provides a structural context for over four decades of studies into this historic and important membrane glycoprotein. In this review, we highlight the key structural features responsible for anion binding and translocation and have integrated the following topological markers within the Band 3 structure: blood group antigens, N-glycosylation site, protease cleavage sites, inhibitor and chemical labeling sites, and the results of scanning cysteine and N-glycosylation mutagenesis. Locations of mutations linked to human disease, including those responsible for Southeast Asian ovalocytosis, hereditary stomatocytosis, hereditary spherocytosis, and distal renal tubular acidosis, provide molecular insights into their effect on Band 3 folding. Finally, molecular dynamics simulations of phosphatidylcholine self-assembled around Band 3 provide a view of this membrane protein within a lipid bilayer.

Structure of eukaryotic purine/H(+) symporter UapA suggests a role for homodimerization in transport activity.

The uric acid/xanthine H(+) symporter, UapA, is a high-affinity purine transporter from the filamentous fungus Aspergillus nidulans. Here we present the crystal structure of a genetically stabilized version of UapA (UapA-G411VΔ1-11) in complex with xanthine. UapA is formed from two domains, a core domain and a gate domain, similar to the previously solved uracil transporter UraA, which belongs to the same family. The structure shows UapA in an inward-facing conformation with xanthine bound to residues in the core domain. Unlike UraA, which was observed to be a monomer, UapA forms a dimer in the crystals with dimer interactions formed exclusively through the gate domain. Analysis of dominant negative mutants is consistent with dimerization playing a key role in transport. We postulate that UapA uses an elevator transport mechanism likely to be shared with other structurally homologous transporters including anion exchangers and prestin.

Crystal structure of the anion exchanger domain of human erythrocyte band 3.

Anion exchanger 1 (AE1), also known as band 3 or SLC4A1, plays a key role in the removal of carbon dioxide from tissues by facilitating the exchange of chloride and bicarbonate across the plasma membrane of erythrocytes. An isoform of AE1 is also present in the kidney. Specific mutations in human AE1 cause several types of hereditary hemolytic anemias and/or distal renal tubular acidosis. Here we report the crystal structure of the band 3 anion exchanger domain (AE1(CTD)) at 3.5 angstroms. The structure is locked in an outward-facing open conformation by an inhibitor. Comparing this structure with a substrate-bound structure of the uracil transporter UraA in an inward-facing conformation allowed us to identify the anion-binding position in the AE1(CTD), and to propose a possible transport mechanism that could explain why selected mutations lead to disease.

Structure determination of an integral membrane protein at room temperature from crystals in situ.

The structure determination of an integral membrane protein using synchrotron X-ray diffraction data collected at room temperature directly in vapour-diffusion crystallization plates (in situ) is demonstrated. Exposing the crystals in situ eliminates manual sample handling and, since it is performed at room temperature, removes the complication of cryoprotection and potential structural anomalies induced by sample cryocooling. Essential to the method is the ability to limit radiation damage by recording a small amount of data per sample from many samples and subsequently assembling the resulting data sets using specialized software. The validity of this procedure is established by the structure determination of Haemophilus influenza TehA at 2.3 Šresolution. The method presented offers an effective protocol for the fast and efficient determination of membrane-protein structures at room temperature using third-generation synchrotron beamlines.

Clustering procedures for the optimal selection of data sets from multiple crystals in macromolecular crystallography.

The availability of intense microbeam macromolecular crystallography beamlines at third-generation synchrotron sources has enabled data collection and structure solution from microcrystals of <10 µm in size. The increased likelihood of severe radiation damage where microcrystals or particularly sensitive crystals are used forces crystallographers to acquire large numbers of data sets from many crystals of the same protein structure. The associated analysis and merging of multi-crystal data is currently a manual and time-consuming step. Here, a computer program, BLEND, that has been written to assist with and automate many of the steps in this process is described. It is demonstrated how BLEND has successfully been used in the solution of a novel membrane protein.

Yersinia pestis TIR-domain protein forms dimers that interact with the human adaptor protein MyD88.

Recent research has highlighted the presence of Toll/Interleukin 1 receptor (TIR)-domain proteins (Tdps) in a range of bacteria, suggested to form interactions with the human adaptor protein MyD88 and inhibit intracellular signaling from Toll-like receptors (TLRs). A Tdp has been identified in Yersinia pestis (YpTdp), a highly pathogenic bacterium responsible for plague. Expression of a number of YpTIR constructs of differing lengths (YpTIR1, S130-A285; YpTIR2, I137-I273; YpTIR3, I137-246; YpTIR4, D107-S281) as fusions with an N-terminal GB1 tag (the B1 immunoglobulin domain of Streptococcal protein G) yielded high levels of soluble protein. Subsequent purification yielded 4-6 mg/L pure, folded protein. Thrombin cleavage allowed separation of the GB1 tag from YpTIR4 resulting in folded protein after cleavage. Nuclear magnetic resonance spectroscopy, size exclusion chromatography, SDS-PAGE analysis and static light scattering all indicate that the YpTIR forms dimers. Generation of a double Cys-less mutant resulted in an unstable protein containing mainly monomers indicating the importance of disulphide bonds in dimer formation. In addition, the YpTIR constructs have been shown to interact with the human adaptor protein MyD88 using 2D NMR and GST pull down. YpTIR is an excellent candidate for further study of the mechanism of action of pathogenic bacterial Tdps.

Benchmarking membrane protein detergent stability for improving throughput of high-resolution X-ray structures.

Obtaining well-ordered crystals is a major hurdle to X-ray structure determination of membrane proteins. To facilitate crystal optimization, we investigated the detergent stability of 24 eukaryotic and prokaryotic membrane proteins, predominantly transporters, using a fluorescent-based unfolding assay. We have benchmarked the stability required for crystallization in small micelle detergents, as they are statistically more likely to lead to high-resolution structures. Using this information, we have been able to obtain well-diffracting crystals for a number of sodium and proton-dependent transporters. By including in the analysis seven membrane proteins for which structures are already known, AmtB, GlpG, Mhp1, GlpT, EmrD, NhaA, and LacY, it was further possible to demonstrate an overall trend between protein stability and structural resolution. We suggest that by monitoring membrane protein stability with reference to the benchmarks described here, greater efforts can be placed on constructs and conditions more likely to yield high-resolution structures.

Crystal structure of TtgV in complex with its DNA operator reveals a general model for cooperative DNA binding of tetrameric gene regulators.

The majority of bacterial gene regulators bind as symmetric dimers to palindromic DNA operators of 12-20 base pairs (bp). Multimeric forms of proteins, including tetramers, are able to recognize longer operator sequences in a cooperative manner, although how this is achieved is not well understood due to the lack of complete structural information. Models, instead of structures, of complete tetrameric assembly on DNA exist in literature. Here we present the crystal structures of the multidrug-binding protein TtgV, a gene repressor that controls efflux pumps, alone and in complex with a 42-bp DNA operator containing two TtgV recognition sites at 2.9 Å and 3.4 Å resolution. These structures represent the first full-length functional tetrameric protein in complex with its intact DNA operator containing two continuous recognition sites. TtgV binds to its DNA operator as a highly asymmetric tetramer and induces considerable distortions in the DNA, resulting in a 60° bend. Upon binding to its operator, TtgV undergoes large conformational changes at the monomeric, dimeric, and tetrameric levels. The structures here reveal a general model for cooperative DNA binding of tetrameric gene regulators and provide a structural basis for a large body of biochemical data and a reinterpretation of previous models for tetrameric gene regulators derived from partial structural data.

Crystal structure of MexZ, a key repressor responsible for antibiotic resistance in Pseudomonas aeruginosa.

Pseudomonas aeruginosa is responsible for around 10% of all hospital-acquired infections and the single most important pathogen of cystic fibrosis lungs. P. aeruginosa has high intrinsic and acquired antibiotic resistance, due to the extrusion of antibiotics by multidrug efflux pumps. The gene regulator MexZ controls the expression of mexXY, the efflux pump responsible for resistance to many drugs that are used for treating CF patients. MexZ is shown to be the most frequently mutated gene in P. aeruginosa isolated from CF patient lungs, confirming its importance in multidrug resistance. Here we present the crystal structure of MexZ at 2.9Å. Combining the structural information with biochemical data on key mutants identified, we provide an explanation for the structural and functional consequences of these mutants. This work provides a framework for further characterisation of MexZ in order to fully understand its regulation and induction.

Structural insights into serine-rich fimbriae from Gram-positive bacteria.

The serine-rich repeat family of fimbriae play important roles in the pathogenesis of streptococci and staphylococci. Despite recent attention, their finer structural details and precise adhesion mechanisms have yet to be determined. Fap1 (Fimbriae-associated protein 1) is the major structural subunit of serine-rich repeat fimbriae from Streptococcus parasanguinis and plays an essential role in fimbrial biogenesis, adhesion, and the early stages of dental plaque formation. Combining multidisciplinary, high resolution structural studies with biological assays, we provide new structural insight into adhesion by Fap1. We propose a model in which the serine-rich repeats of Fap1 subunits form an extended structure that projects the N-terminal globular domains away from the bacterial surface for adhesion to the salivary pellicle. We also uncover a novel pH-dependent conformational change that modulates adhesion and likely plays a role in survival in acidic environments.

New tools for membrane protein research.

The last five years have seen a dramatic increase in the number of membrane protein structures. The vast majority of these 191 unique structures are of membrane proteins from prokaryotic sources. Whilst these have provided unprecedented insight into the mechanism of action of these important molecules our understanding of many clinically important eukaryotic membrane proteins remains limited by a lack of high resolution structural data. It is clear that novel approaches are required to facilitate the structural characterization of eukaryotic membrane proteins. Here we review some of the techniques developed recently which are having a major impact on the way in which structural studies of eukaryotic membrane proteins are being approached. Several different high throughput approaches have been designed to identify membrane proteins most suitable for structural studies. One approach is to screen large numbers of related or non-related membrane proteins using GFP fusion proteins. An alternative involves generating large numbers of mutants of a single protein with a view to obtaining a fully functional but highly stable membrane protein. These, and other novel techniques that aim to facilitate the production of protein likely to yield well-diffracting crystals are described.

Crystal structures of multidrug binding protein TtgR in complex with antibiotics and plant antimicrobials.

Antibiotic resistance is a widely spread phenomenon. One major mechanism that underlies antibiotic resistance in bacteria is the active extrusion of toxic compounds through the membrane-bound efflux pumps that are often regulated at the transcriptional level. TtgR represses the transcription of TtgABC, a key efflux pump in Pseudomonas putida, which is highly resistant to antibiotics, solvents and toxic plant secondary products. Previously we showed that TtgR is the only reported repressor that binds to different classes of natural antimicrobial compounds, which are also extruded by the efflux pump. We report here five high-resolution crystal structures of TtgR from the solvent-tolerant strain DOT-T1E, including TtgR in complex with common antibiotics and plant secondary metabolites. We provide structural basis for the unique ligand binding properties of TtgR. We identify two distinct and overlapping ligand binding sites; the first one is broader and consists of mainly hydrophobic residues, whereas the second one is deeper and contains more polar residues including Arg176, a unique residue present in the DOT-T1E strain but not in other Pseudomonas strains. Phloretin, a plant antimicrobial, can bind to both binding sites with distinct binding affinities and stoichiometries. Results on ligand binding properties of native and mutant TtgR proteins using isothermal titration calorimetry confirm the binding affinities and stoichiometries, and suggest a potential positive cooperativity between the two binding sites. The importance of Arg176 in phloretin binding was further confirmed by the reduced ability of phloretin in releasing the mutant TtgR from bound DNA compared to the native protein. The results presented here highlight the importance and versatility of regulatory systems in bacterial antibiotic resistance and open up new avenues for novel antimicrobial development.

Supported membrane nanodevices.

Supported membrane nanodevices are based on natural or artificial ion channels embedded in a lipid membrane deposited on a chip wafer. Membrane conductance is modulated by biorecognitive events, with the use of intrinsic binding sites of the ion channel or via artificial sites fused to the channel protein. Artificial ion gates are constructed by coupling a specific ligand for the analyte near the channel entrance or a site important to triggering channel conformation. The binding event leads to the closure of the ion channel or induces a conformational change of the channel, reducing the ion flux. The signal transduced from the device is the decrease in the ion flux-induced electron current at a silver-silver chloride electrode at ultimate single-molecule sensitivity. Among the natural ion channels, gramicidin A, a transport antibiotic, was found to be most suitable, and thus was used by AMBRI, Australia, to set up prototypes of membrane biochips, using self-association of the dimer. Covalent dimerization-based devices, developed by the Vienna group, make use of the down-regulation of the permanently open membrane-spanning bisgramicidine ion channel. The reactive group at the C-terminus, a hydroxy group, allows precise coupling of the analyte-binding moiety in gramicidin as well as bisgramicidin. The device is set up with bilayer membranes deposited on apertures of a hydrophobic frame structure produced via microlithography, facing an aqueous or hydro-gel micro-environment on both sides, constructing black lipid membranes or patch-clamp devices "on chip." The setup of the device needs gel membrane supports that allow membrane formation and contribute to the stability of the bilayer by exposure of functional groups that promote electrostatic interaction and formation of hydrogen bridges and enable the introduction of covalent spacers and anchors. Photo-cross-linked polyvinylpyrrolidone and polyacrylamide, electropolymerized polydiaminobenzene and coated agarose, as well as various chemical modifications of these polymers, were employed as membrane supports. With optimized assemblies, the membrane support did allow the formation of stable bilayer membranes, proved by "gigaseal" (electrical sealing with giga-ohm resistance) to be free of any point defects in the lipid assembly. Supports with and without hydrophilic and hydrophobic anchors were studied with reference to promoting the formation of a self-assembled membrane, to their electric resistance, and to the capability to insert functional ionophores. All components, including novel chemically engineered ion channels, novel amphiphilic lipids, a microlithographically designed chip, isolating polymer frames, and a hydrogel membrane support, are combined in the new bionanodevice. Sensitivity and specificity were proved, for example, with the use of an antibody-antigen couple down-regulating the ion flux through the membrane channel. Single ion channels incorporated in the supported lipid bilayer gave stable signals at an operational stability of several hours, which is already sufficient to test and screen for membrane receptors but still insufficient to use this device as a sensor for off-site application. Further optimization to increase operational and storage stability is done by a number of groups to allow a broad application of these devices.

Phage display antibody-based proteomic device using resonance-enhanced detection.

The combination of phage display antibody arrays with a novel nanotransducer technique based on resonant nanoparticles in a nanosandwiched film enables the sensitive parallel screening of proteins. Using the resonance of nanoparticles with their induced mirror dipoles in a thin-film structure, limitations of fluorophores, such as unspecific background and nonvisibility to the eye, can be overcome, thereby leading to an optical signal significantly more sensitive than that of standard colloid techniques. The signal can be both directly observed as a color change of a microdot at the sensor surface and tuned throughout the visible range of the spectrum. Here we report the application of an optical chip using scFv-antibody-antigen interactions. Artificial scFv-antibodies against a variety of proteins, including yeast enzymes and bovine serum albumin (as a standard), were constructed via Phage Display. These scFv-antibodies were then coated onto metal nanoclusters and bound to their antigens that were arrayed as nanodroplets at the resonance layer of the chip. ScFv-Antibody-antigen interaction resulted in a visible array of microdots. Using resonance-enhanced absorption, the absorption signal of the spots was amplified by one to two orders of magnitude (compared to colloid-based techniques). For quantitative analysis, either an 8-micron scanner or a CCD camera (resolution 4 microns) was employed to gain direct-reflection spectra rather than unspecific scatter data (prone to dust and unspecific interaction). Our results demonstrate that this device enables high-throughput proteomics to overcome some limitations of fluorescence, enzyme labels, and colloid techniques.