A fluorescence-based multivariate method for biodiesel quantification in undiluted diesel-biodiesel blends without sample preparation.

In this work, excitation-emission matrices (EEMs) were used in association with parallel factor analysis (PARAFAC) to assess biodiesel content in undiluted diesel-biodiesel blends (DBBs) without pre-sample preparation. EEMs were decomposed using the PARAFAC (EEMs-PARAFAC), and the loading values of the PARAFAC component as a function of biodiesel content in the blends were used to build an analytical model to quantify the biodiesel content in DBBs. The proposed model presenting a limit of detection (LOD) and a limit of quantification (LOQ) of 2.5% and 11% w/w, respectively, successfully predicted the biodiesel content in the validation samples. The robustness of the model was confirmed by a close analysis of the root mean square error of prediction, standard error of prediction, relative standard deviation of prediction, and Bias. Therefore, an accurate and robust analytical model based on EEMs-PARAFAC was developed to quantify the biodiesel content in undiluted DBBs without sample preparation.

Photodynamic inactivation of methicillin-resistant Staphylococcus aureus by using Giemsa dye as a photosensitizer.

The rise of antibiotic-resistant bacteria calls for innovative approaches to combat multidrug-resistant strains. Here, the potential of the standard histological stain, Giemsa, to act as a photosensitizer (PS) for antimicrobial photodynamic inactivation (aPDI) against methicillin-sensitive Staphylococcus aureus (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA) strains is reported. Bioassays were performed using various Giemsa concentrations (ranging from 0.0 to 20.0 µM) under 625 nm illumination at a light dose of 30 J cm-2. Remarkably, Giemsa completely inhibited the growth of MSSA and MRSA bacterial colonies for concentrations at 10 µM and higher but exhibited no inhibitory effect without light exposure. Partition coefficient analysis revealed Giemsa's affinity for membranes. Furthermore, we quantified the production of reactive oxygen species (ROS) and singlet oxygen (1O2) to elucidate the aPDI mechanisms underlying bacterial inactivation mediated by Giemsa. These findings highlight Giemsa stain's potential as a PS in aPDI for targeting multidrug-resistant bacteria.

Assessing the Fate of Superparamagnetic Iron Oxide Nanoparticles Carrying Usnic Acid as Chemical Cargo on the Soil Microbial Community.

In the present study we evaluate the effect of superparamagnetic iron oxide nanoparticles (SPIONs) carrying usnic acid (UA) as chemical cargo on the soil microbial community in a dystrophic red latosol (oxysol). Herein, 500 ppm UA or SPIONs-framework carrying UA were diluted in sterile ultrapure deionized water and applied by hand sprayer on the top of the soil. The experiment was conducted in a growth chamber at 25 °C, with a relative humidity of 80% and a 16 h/8 h light-dark cycle (600 lx light intensity) for 30 days. Sterile ultrapure deionized water was used as the negative control; uncapped and oleic acid (OA) capped SPIONs were also tested to assess their potential effects. Magnetic nanostructures were synthesized by a coprecipitation method and characterized by scanning and transmission electron microscopy (SEM and TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), zeta potential, hydrodynamic diameter, magnetic measurements, and release kinetics of chemical cargo. Uncapped and OA-capped SPIONs did not significantly affect soil microbial community. Our results showed an impairment in the soil microbial community exposed to free UA, leading to a general decrease in negative effects on soil-based parameters when bioactive was loaded into the nanoscale magnetic carrier. Besides, compared to control, the free UA caused a significant decrease in microbial biomass C (39%), on the activity of acid protease (59%), and acid phosphatase (23%) enzymes, respectively. Free UA also reduced eukaryotic 18S rRNA gene abundance, suggesting a major impact on fungi. Our findings indicate that SPIONs as bioherbicide nanocarriers can reduce the negative impacts on soil. Therefore, nanoenabled biocides may improve agricultural productivity, which is important for food security due to the need of increasing food production.

Miniaturized 3D-Printed Cell Enables Water/Ethanol Quantification Using Electrochemical Impedance Spectroscopy.

A miniaturized and low-cost electrochemical 3D-printed system for rapid and accurate quantification of ethanol content in ethanol fuel using electrochemical impedance spectroscopy (EIS) was developed. The monolithic design of the system incorporates insulating thermoplastic electrode separators, with only the cover being mobile, allowing for easy assembly and handling. The portable device, measuring approximately 26 × 24 mm, has a maximum capacity of 1 mL, making it suitable for lab-on-a-chip and portable analysis. By utilizing the dielectric constant of ethanol and ethanol fuel mixtures with water, the miniaturized EIS cell quantifies ethanol content effectively. To validate its performance, we compared measurements from four gas stations with a digital densimeter, and the values obtained from the proposed system matched perfectly. Our miniaturized and low-cost electrochemical 3D-printed device can be printed and assembled in two hours, offering a cost-effective solution for fast and precise ethanol quantification. Its versatility, affordability, and compatibility with lab-on-a-chip platforms make it easily applicable, including for fuel quality control and on-site analysis in remote locations.

Preparation and Phytotoxicity Evaluation of Cellulose Acetate Nanoparticles.

The use of biocompatible and low-cost polymeric matrices to produce non-phytotoxic nanoparticles for delivery systems is a promising alternative for good practices in agriculture management and biotechnological applications. In this context, there is still a lack of studies devoted to producing low-cost polymeric nanoparticles that exhibit non-phytotoxic properties. Among the different polymeric matrices that can be used to produce low-cost nanoparticles, we can highlight the potential application of cellulose acetate, a natural biopolymer with biocompatible and biodegradable properties, which has already been used as fibers, membranes, and films in different agricultural and biotechnological applications. Here, we provided a simple and low-cost route to produce cellulose acetate nanoparticles (CA-NPs), by modified emulsification solvent evaporation technique, with a main diameter of around 200 nm and a spherical and smooth morphology for potential use as agrochemical nanocarriers. The non-phytotoxic properties of the produced cellulose acetate nanoparticles were proved by performing a plant toxic test by Allium cepa assay. The cytotoxicity and genotoxicity tests allowed us to evaluate the mitotic process, chromosomal abnormalities, inhibition/delay in root growth, and micronucleus induction. In summary, the results demonstrated that CA-NPs did not induce phytotoxic, cytotoxic, or genotoxic effects, and they did not promote changes in the root elongation, germination or in the mitotic, chromosomal aberration, and micronucleus indices. Consequently, the present findings indicated that CA-NPs can be potentially used as environmentally friendly nanoparticles.

Oxidative stability and elemental analysis of sunflower (Helianthus annuus) edible oil produced in Brazil using a domestic extraction machine.

The consumption of regular vegetable oils has been linked to energy acquisition, nutritional benefits, health improvement, and the regulation of metabolic diseases. This study evaluated fatty acids composition, physicochemical, thermal, oxidative, and optical properties, and quantified trace elements in the sunflower oil extracted by a domestic cold-press machine. The oil presented linoleic (54.00%) and oleic (37.29%) primary unsaturated fatty acids (91.67%), in which atherogenic (0.05), thrombogenic (0.16), hypocholesterolemic/hypercholesterolemic (21.97), peroxide (16.16), saponification (141.80), and relative density indices (0.92) demonstrated to be suitable for human consumption and possible health promotion. In addition, the concentrations of trace elements by ICP OES were ordered Zn > Fe > Al > Cu > Mn > Cr. Concentrations of Zn, Fe, Al, Cu, and Mn were lower than FAO/WHO and DRI/AI limits, while Cr concentrations exceeded the FAO/WHO limits, which can be used as an indicator of the polluted ambiance. Sunflower oil quantities daily consumption were calculated by taking into account non-carcinogenic risk (CR < 10-4), and total non-carcinogenic hazard index (HI < 1). Based on trace elements determined in this study, the suitable quantity of sunflower oil consumption varies according to individuals aged 8, 18, and 30 years and will be deemed 0.61, 1.46, and 1.65 g/kg, respectively, attending HI = 0.99 and CR < 10-4.

Antimicrobial and Photoantimicrobial Activities of Chitosan/CNPPV Nanocomposites.

Multidrug-resistant bacteria represent a global health and economic burden that urgently calls for new technologies to combat bacterial antimicrobial resistance. Here, we developed novel nanocomposites (NCPs) based on chitosan that display different degrees of acetylation (DAs), and conjugated polymer cyano-substituted poly(p-phenylene vinylene) (CNPPV) as an alternative approach to inactivate Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria. Chitosan's structure was confirmed through FT-Raman spectroscopy. Bactericidal and photobactericidal activities of NCPs were tested under dark and blue-light irradiation conditions, respectively. Hydrodynamic size and aqueous stability were determined by DLS, zeta potential (ZP) and time-domain NMR. TEM micrographs of NCPs were obtained, and their capacity of generating reactive oxygen species (ROS) under blue illumination was also characterized. Meaningful variations on ZP and relaxation time T2 confirmed successful physical attachment of chitosan/CNPPV. All NCPs exhibited a similar and shrunken spherical shape according to TEM. A lower DA is responsible for driving higher bactericidal performance alongside the synergistic effect from CNPPV, lower nanosized distribution profile and higher positive charged surface. ROS production was proportionally found in NCPs with and without CNPPV by decreasing the DA, leading to a remarkable photobactericidal effect under blue-light irradiation. Overall, our findings indicate that chitosan/CNPPV NCPs may constitute a valuable asset for the development of innovative strategies for inactivation and/or photoinactivation of bacteria.

Environmentally Safe Photodynamic Control of Aedes aegypti Using Sunlight-Activated Synthetic Curcumin: Photodegradation, Aquatic Ecotoxicity, and Field Trial.

This study reports curcumin as an efficient photolarvicide against Aedes aegypti larvae under natural light illumination. Larval mortality and pupal formation were monitored daily for 21 days under simulated field conditions. In a sucrose-containing formulation, a lethal time 50 (LT50) of 3 days was found using curcumin at 4.6 mg L-1. This formulation promoted no larval toxicity in the absence of illumination, and sucrose alone did not induce larval phototoxicity. The photodegradation byproducts (intermediates) of curcumin were determined and the photodegradation mechanisms proposed. Intermediates with m/z 194, 278, and 370 were found and characterized using LC-MS. The ecotoxicity of the byproducts on non-target organisms (Daphnia, fish, and green algae) indicates that the intermediates do not exhibit any destructive potential for aquatic organisms. The results of photodegradation and ecotoxicity suggest that curcumin is environmentally safe for non-target organisms and, therefore, can be considered for population control of Ae. aegypti.

Characterization of Buriti (Mauritia flexuosa) Pulp Oil and the Effect of Its Supplementation in an In Vivo Experimental Model.

Mauritia flexuosa (Buriti) pulp oil contains bioactive substances and lipids that are protective against cardiovascular and inflammatory diseases. We performed physical and chemical analyses to verify its quality and stability. Buriti oil was stable according to the Rancimat test, presenting an induction period of 6.6 h. We evaluated the effect of supplementation with crude buriti oil and olive oil on metabolic parameters in 108 Swiss mice for 90 days. We investigated six groups: extra virgin olive oil (EVOO) 1 and 2 (1000 and 2000 mg/kg), buriti oil (BO) 1 and 2 (1000 and 2000 mg/kg), synergic (S) (BO1 + EVOO1), and control (water dose 1000 mg/kg). The animals were euthanized to examine their blood, livers, and fats. The supplementation did not interfere with food consumption, weight gain, and histological alterations in the liver. Group S showed the strongest relationship with the fractions HDL-c and non-HDL-c, indicating a possible cardioprotective effect. Moreover, we observed significantly higher IL-6 levels in the control, EVOO2, and BO1 groups than in the EVOO1 group. Resistin was also significantly higher for the synergic treatment than for the control. We conclude that BO combined with EVOO could be an excellent food supplement for human consumption.

Eco-Friendly Production of AuNPs and Their Impact on the Oil Oxidative Stability.

Vegetable oils have been used for different applications and, more recently, as an active host medium to obtain nanoparticles for employment in bionanotechnological applications. Nevertheless, oils are very susceptible to oxidation during production, storage, and transportation because of their chemical composition. Consequently, any modification in their production must be accompanied by an analysis of the oxidative stability. In this study, naked and biocompatible gold nanoparticles (AuNPs) were grown on sunflower oil during sputtering deposition using different deposition times. Size and morphology were determined by transmission electron microscopy (TEM) and their concentrations were found by inductively coupled plasma-optical emission spectroscopy (ICP-OES). Rancimat® method was employed to evaluate the AuNPs influence on the oxidative stability of the vegetable oil. Well-dispersed quasi-spherical NPs were produced with a mean diameter in the 2.9-3.7 nm range and they were concentration-dependent on the deposition time. A concentration of about 11 mg/L, 38 mg/L, and 225 mg/L of AuNPs was obtained for a deposition time of 5 min, 15 min, and 30 min, respectively. The results also revealed that AuNPs negatively affected the oxidative stability of the sunflower oil and exponentially reduced the induction period (IP) with the increase in AuNPs content. IP reductions of 63%, 77%, and 81% were determined for the AuNPs containing samples at 11 mg/L, 38 mg/L, and 225 mg/L. For the first time, it is reported that naked AuNPs promote the rapid degradation of vegetable oil and this points out the need for attention relative to the quality of vegetable oils used to host metal nanoparticles.

Photodynamic Inactivation of Methicillin-Resistant Staphylococcus aureus by a Natural Food Colorant (E-141ii).

This study evaluates the photosensitizing effectiveness of sodium copper chlorophyllin, a natural green colorant commonly used as a food additive (E-141ii), to inactivate methicillin-sensitive and methicillin-resistant Staphylococcus aureus under red-light illumination. Antimicrobial photodynamic inactivation (aPDI) was tested on a methicillin-sensitive reference strain (ATCC 25923) and a methicillin-resistant Staphylococcus aureus strain (GenBank accession number Mh087437) isolated from a clinical sample. The photoinactivation efficacy was investigated by exposing the bacterial strains to different E-141ii concentrations (0.0, 1.0, 2.5, 5.0, 10.0, and 20.0 µM) and to red light (625 nm) at 30 J cm-2. The results showed that E-141ii itself did not prevent bacterial growth for all tested concentrations when cultures were placed in the dark. By contrast, E-141ii photoinactivated both methicillin-sensitive Staphylococcus aureus (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA) under red-light illumination. However, different dose responses were observed for MSSA and MRSA. Whilst the MSSA growth was inhibited to the detection limit of the method with E-141ii at 2.5 µM, >10 µM concentrations were required to inhibit the growth of MRSA. The data also suggest that E-141ii can produce reactive oxygen species (ROS) via Type I reaction by electron transfer from its first excited singlet state to oxygen molecules. Our findings demonstrate that the tested food colorant has great potential to be used in aPDI of MRSA.

Effective killing of bacteria under blue-light irradiation promoted by green synthesized silver nanoparticles loaded on reduced graphene oxide sheets.

Graphene oxide (GO) materials loaded with silver nanoparticles (AgNPs) have drawn considerable attention due to their capacity to efficiently inactivate bacteria though a multifaceted mechanism of action, as well as for presenting a synergetic effect against bacteria when compared to the activity of AgNPs and GO alone. In this investigation, we present an inexpensive and environmentally-friendly method for synthesizing reduced GO sheets coated with silver nanoparticles (AgNPs/r-GO) using a coffee extract solution as a green reducing agent. The physical and chemical properties of the produced materials were extensively characterized by scanning electron microscopy (SEM), field-emission gun transmission electron microscopy (FEG-TEM), ultraviolet and visible absorption (UV-Vis), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma-optical emission spectroscopy (ICP-OES) and ion release determination. The results demonstrated that AgNPs/r-GO composites were successfully produced, revealing the formation of micrometer-sized r-GO sheets decorated by AgNPs of approximately 70 nm diameter. Finally, bactericidal and photobactericidal effects of the AgNPs/r-GO composites were tested against Staphylococcus aureus, in which the results showed that the composites presented antimicrobial and photoantimicrobial activities. Moreover, our results demonstrated for the first time, to our knowledge, that an efficient process of bacterial inactivation can be achieved by using AgNPs/r-GO composites under blue light irradiation as a result of three different bacterial killing processes: (i) chemical effect promoted by Ag+ ion release from AgNPs; (ii) photocatalytic activity induced by AgNPs/r-GO composites, enhancing the bacterial photoinactivation due to the excited-Plasmons of the AgNPs when anchored on r-GO; and (iii) photodynamic effect produced by bacterial endogenous photosensitizers under blue-light irradiation. In summary, the present findings demonstrated that AgNPs/r-GO can be obtained by a non-toxic procedure with great potential for biomedical-related applications.

In vitro and in vivo impact assessment of eco-designed CuO nanoparticles on non-target aquatic photoautotrophic organisms.

This work has assessed the impact of copper oxide nanoparticles (CuONPs), designed via green route, toward photosynthetic apparatus on aquatic photoautotrophic organisms. In order to filling knowledge gaps, in vitro and in vivo assays were performed, using cyanobacterial phycocyanin (C-PC) from Arthrospira platensis and Lemna valdiviana plants (duckweed), respectively. Impairment in light energy transfer became evident in C-PC exposed to CuONPs, giving rise to an increase of light absorption and a suppression of fluorescence emission. Fourier transform infrared spectroscopy (FTIR) results showed that C-PC structures might be altered by the nanoparticles, also revealed that CuONPs preferably interacts with -NH functional groups. The data also revealed that CuONPs affected the chlorophyll a content in duckweed leaves. In addition, photosystem II (PSII) performance was significantly affected by CuONPs, negatively impacting the PSII photochemical network. In summary, the results point out that, even eco-friendly designed, CuONPs may negatively affect the photosynthetic process when accumulated by aquatic photoautotrophs.

Phytotoxicity of silver nanoparticles on Vicia faba: Evaluation of particle size effects on photosynthetic performance and leaf gas exchange.

Nanotechnology is an emerging field in science and engineering, which presents significant impacts on the economy, society and the environment. The nanomaterials' (NMs) production, use, and disposal is inevitably leading to their release into the environment where there are uncertainties about its fate, behaviour, and toxicity. Recent works have demonstrated that NMs can penetrate, translocate, and accumulate in plants. However, studies about the effects of the NMs on plants are still limited because most investigations are carried out in the initial stage of plant development. The present study aimed to evaluate and characterize the photochemical efficiency of photosystem II (PSII) of broad bean (Vicia faba) leaves when subjected to silver nanoparticles (AgNPs) with diameters of 20, 51, and 73 nm as well as to micrometer-size Ag particles (AgBulk). The AgNPs were characterized by transmission electron microscopy and dynamic light scattering. The analyses were performed by injecting the leaves with 100 mg L-1 aqueous solution of Ag and measuring the chlorophyll fluorescence imaging, gas exchange, thermal imaging, and reactive oxygen species (ROS) production. In addition, silver ion (Ag+) release from Ag particles was determined by dialysis. The results revealed that AgNPs induce a decrease in the photochemical efficiency of photosystem II (PSII) and an increase in the non-photochemical quenching. The data also revealed that AgNPs affected the stomatal conductance (gs) and CO2 assimilation. Further, AgNPs induced an overproduction of ROS in Vicia faba leaves. Finally, all observed effects were particle diameter-dependent, increasing with the reduction of AgNPs diameter and revealing that AgBulk caused only a small or no changes on plants. In summary, the results point out that AgNPs may negatively affect the photosynthesis process when accumulated in the leaves, and that the NPs themselves were mainly responsible since negligible Ag+ release was detected.

Evaluating the applicability of multi-energy calibration as an alternative method for quantitative molecular spectroscopy analysis.

Multi-Energy Calibration (MEC) was recently proposed as an innovative analytical method to be used in efficient and accurate quantitative analysis based on atomic spectroscopy. Here, the applicability of the MEC method for quantifying molecular species using UV-Vis and fluorescence measurements was evaluated for the first time. UV-Vis and fluorescence spectra of the analytical solutions of methylene blue and eosin-methylene blue in two different solvents (distilled-deionized water and methanol) were collected. MEC showed high precision and sensitivity for determining the analyte concentration, providing similar limit of detection and quantification when compared with conventional analytical methods, such as external standard calibration and standard additions. Therefore, the present study has shown that MEC can be successfully applied for quantifying molecular species in a simple and efficient way accounting UV-Vis and fluorescence spectroscopy.

How does aquatic macrophyte Salvinia auriculata respond to nanoceria upon an increased CO2 source? A Fourier transform-infrared photoacoustic spectroscopy and chlorophyll a fluorescence study.

With the continued increase of technological uses of cerium oxide nanoparticles (CeO2 NPs or nanoceria) and their unregulated disposal, the accumulation of nanoceria in the environment is inevitable. Concomitantly, atmospheric carbon dioxide (CO2) levels continue to rise, increasing the concentrations of bicarbonate ions in aquatic ecosystems. This study investigates the influence of CeO2 NPs (from 0 to 100 µgL-1) in the presence and absence of an elevated bicarbonate (HCO3-) ion concentration (1 mM), on vibrational biochemical parameters and photosystem II (PSII) activity in leaf discs of Salvinia auriculata. Fourier transform-infrared photoacoustic spectroscopy (FTIR-PAS) was capable of diagnostic use to understand biochemical and metabolic changes in leaves submitted to the CeO2 NPs and also detected interactive responses between CeO2 NPs and HCO3- exposure at the tissue level. The results showed that the higher CeO2 NPs levels in the presence of HCO3- increased the non-photochemical quenching (NPQ) and coefficient of photochemical quenching in dark (qPd) compared to the absence of HCO3. Moreover, the presence of HCO3- significantly decreased the NPQ at all levels of CeO2 NPs demonstrating that HCO3- exposure may change the non-radiative process involved in the operation of the photosynthetic apparatus. Overall, the results of this study are useful for providing baseline information on the interactive effects of CeO2 NPs and elevated HCO3- ion concentration on photosynthetic systems.

An Analytical Evaluation of the Synergistic Effect on Biodiesel Oxidation Stability Promoted by Binary and Ternary Blends Containing Multifunctional Additives.

The antioxidant potential of a novel additive, named maleimide p-CH3, and the synergistic effect on biodiesel stabilization when combined with a traditional synthetic antioxidant (e.g., propyl gallate (PG)) as well as alternative additives (e.g., alizarin (ALZ) and citric acid (CA)) were investigated. The additives were combined in binary and/or ternary blends at low concentrations and their effectiveness against soybean biodiesel oxidation in the absence and presence of metal was tested. The effectiveness of binary and ternary blends was also evaluated by the Rancimat® method and compared with total acid number (TAN). The results showed that the combinations presented synergetic effects and were effective in stabilizing biodiesel in accordance with the minimum requirements of EN 14214 and also revealed that the mixture containing PG and p-CH3, even at low concentrations, can be successfully applied for biodiesel preservation. In summary, we report that the biodiesel stability can be obtained by using a reduced amount of additives, suggesting that biodiesel shelf life can be improved in association with a cost reduction when compared to the use of conventional antioxidants.

Cytotoxic and genotoxic effects of silver nanoparticles on meristematic cells of Allium cepa roots: A close analysis of particle size dependence.

The use of silver nanoparticles (AgNPs) in commercial products has increased significantly in recent years. However, findings on the toxic effects of the AgNPs are still limited. This paper reports an investigation on the cytotoxic and genotoxic potential of the AgNPs on root cells of Allium cepa. Germination (GI), root elongation (REI), mitotic (MI), nuclear abnormality (NAI), and micronucleus index (MNI) were determined for seeds exposed to various AgNPs diameters (10, 20, 51, and 73 nm) as well as to the silver bulk (AgBulk) (micrometer-size particles) at the concentration of 100 mg·L-1. Transmission electron microscopy (TEM) provided the particle size distribution, while dynamic light scattering (DLS) was used to get the hydrodynamic size, polydispersity index, and zeta potential of the AgNPs. Laser-induced breakdown spectroscopy (LIBS) and inductively coupled plasma/optical emission spectrometry (ICP OES) were applied for quantifying the AgNPs content uptake by roots. Silver dissolution was determined by dialysis experiment. Results showed that the AgNPs penetrated the roots, affecting MI, GI, NAI, and MNI in meristematic cells. Changes in these indicators were AgNPs diameter-dependent so that cytotoxic and genotoxic effects in Allium cepa increased with the reduction of the particle diameter. The results also revealed that the AgNPs were the main responsible for the cytotoxicity and genotoxicity since negligible silver dissolution was observed.

Evaluation of Eosin-Methylene Blue as a Photosensitizer for Larval Control of Aedes aegypti by a Photodynamic Process.

Aedes aegypti (Ae. aegypti) is a competent vector for transmitting important viral diseases such as yellow fever, dengue, chikungunya, and Zika. Several strategies have been applied to avoid Ae. aegypti proliferation by using environmental management, biological, and chemical approaches. However, the development of new methods for effective control of the insect vector population is still needed. Photodynamic control is an alternative way to control the vector population by using a physical approach based on the larval phototoxicity of a photosensitizer. In this context, the present study evaluated the use of eosin-methylene blue (EMB) as a new photosensitizer for photodynamic control of Ae. aegypti larval populations. The photodynamic assays were performed submitting Ae. aegypti third-instar larvae to different EMB concentrations (0.0, 0.5, 1.0, 5.0, 10.0, 50.0, and 100.0 µg mL-1) in combination of three different light doses (24.3, 48.6, and 97.2 J cm-2) under either white-light radiation from RGB LEDs or sunlight. The results demonstrated that EMB presented a rapid internalization into the larvae and was phototoxic. The photodynamic action induced 100% of larval mortality after about 40 min of sunlight irradiation even using low EMB concentration (0.5 µg mL-1). The findings reveal EMB as an effective photoactive compound to control larval populations of Ae. aegypti by photodynamic process induced by either sunlight or white-light from RGB LEDs.

Photoinactivation effect of eosin methylene blue and chlorophyllin sodium-copper against Staphylococcus aureus and Escherichia coli.

The use of eosin methylene blue according to Giemsa as photosensitizer is presented for the first time in this paper. The present study evaluated the potential application of chlorophyllin sodium copper salt (CuChlNa) and eosin methylene blue according to Giemsa (EMB) as antimicrobial photosensitizers (aPS) for photodynamic inactivation (PDI) of Staphylococcus aureus (gram-positive) and Escherichia coli (gram-negative) bacteria. The experiments were performed using S. aureus stain ATCC 25923 and E. coli ATCC 25922 in which five aPS concentrations (0.0, 1.0, 2.5, 5.0, 10.0, and 20.0 µM for S. aureus and 0.0, 5.0, 10.0, 20.0, 40.0, and 50.0 µM for E. coli) were prepared and added in 2 mL of a saline solution containing the bacterial inoculum. After aPS incubation, the samples were divided into two groups, one kept in the dark and another submitted to the illumination. Then, the bacterial inactivation was determined 18 h after the incubation at 37 °C by counting the colony-forming units (CFU). The results revealed that both EMB and CuChlNa can be used as aPS for the photoinactivation of S. aureus, while only EMB was able to photoinactivate E. coli. Nevertheless, a more complex experimental setup was needed for photoinactivation of E. coli. The data showed that EMB and CuChlNa presented similar photoinactivation effects on S. aureus, in which bacterial growth was completely inhibited at photosensitizer (PS) concentrations over 5 µM, when samples were previously incubated for 30 min and irradiated by a light dose of 30 J cm-2 as a result of an illumination of 1 h at 8.3 mW cm-2 by using a red light at 625 nm with a 1 cm beam diameter and output power of 6.5 mW. In the case of E. coli, bacterial growth was completely inhibited only when combining a PS incubation period of 120 min with concentrations over 20 µM.