ABSTRACT
AIM: This study aimed to fabricate dexamethasone sodium phosphate loaded microneedle arrays (MNA) and investigate their efficiency in combination with iontophoresis for the treatment of hind paw oedema in rats. METHODS: Drug loaded polyvinyl alcohol, polyvinyl pyrrolidone and D-sorbitol-based MNA11 were fabricated by vacuum micromolding. Physicochemical, morphological, thermal, in-silico, in-vitro insertion ability (on parafilm) and drug release studies were performed. Ex-vivo permeation, in-vivo insertion and anti-inflammatory studies were performed in combination with iontophoresis. RESULTS: MNA11 displayed sharp-tipped projections and acceptable physicochemical features. Differential scanning calorimetry results indicated that drug loaded MNA11 were amorphous solids. Drug interacted with PVP and PVA predominately via hydrogen bonding. Parafilm displayed conspicuously engraved complementary structure of MNA11. Within 60 min, 91.50 ± 3.1% drug released from MNA11. A significantly higher i.e., 95.06 ± 2.5% permeation of drug was observed rapidly (within 60 min) from MNA11-iontophoresis combination than MNA11 i.e., 84.07 ± 3.5% within 240 min. Rat skin treated using MNA11 and MNA11-iontophoresis showed disruptions / microchannels in the epidermis without any damage to underlying anatomical structures. MNA11-iontophoresis combination led to significant reduction (83.02 ± 3.9%) in paw oedema as compared to MNA11 alone (72.55 ± 4.1%). CONCLUSION: MNA11-iontophoresis combination can act as a promising candidate to deliver drugs transcutaneously for treating inflammatory diseases.
Subject(s)
Administration, Cutaneous , Anti-Inflammatory Agents , Dexamethasone , Drug Delivery Systems , Edema , Iontophoresis , Needles , Skin Absorption , Skin , Animals , Iontophoresis/methods , Dexamethasone/administration & dosage , Dexamethasone/pharmacokinetics , Dexamethasone/analogs & derivatives , Rats , Anti-Inflammatory Agents/administration & dosage , Anti-Inflammatory Agents/pharmacokinetics , Edema/drug therapy , Drug Delivery Systems/methods , Skin/metabolism , Skin/drug effects , Male , Drug Liberation , Inflammation/drug therapy , Rats, Sprague-DawleyABSTRACT
Liquid self-nano emulsifying drug delivery systems (SNEDDS) of furosemide (FSM) have been explored as a potential solution for enhancing solubility and permeability but are associated with rapid emulsification, spontaneous drug release, and poor in vivo correlation. To overcome the shortcoming, this study aimed to develop liquid and solid self-emulsifying drug delivery systems for FSM, compare formulation dynamics, continue in vivo therapeutic efficacy, and investigate the advantages of solidification. For this purpose, liquid SNEDDS (L-SEDDS-FSM) were formed using oleic acid as an oil, chremophore EL, Tween 80, Tween 20 as a surfactant, and PEG 400 as a co-surfactant containing 53 mg/mL FSM. At the same time, solid SNEDDS (S-SEDDS-FSM) was developed by adsorbing liquid SNEDDS onto microcrystalline cellulose in a 1:1 ratio. Both formulations were evaluated for size, zeta potential, lipase degradation, and drug release. Moreover, in vivo diuretic studies regarding urine volume were carried out in mice to investigate the therapeutic responses of liquid and solid SNEDDS formulations. After dilution, L-SEDDS-FSM showed a mean droplet size of 115 ± 4.5 nm, while S-SEDDS-FSM depicted 116 ± 2.6 nm and zeta potentials of -5.4 ± 0.55 and -6.22 ± 1.2, respectively. S-SEDDS-FSM showed 1.8-fold reduced degradation by lipase enzymes in comparison to L-SEDDS-FSM. S-SEDDS-FSM demonstrated a sustained drug release pattern, releasing 63% of the drug over 180 min, in contrast to L-SEDDS-FSM, exhibiting 90% spontaneous drug release within 30 min. L-SEDDS-FSM exhibited a rapid upsurge in urine output (1550 ± 56 µL) compared to S-SEDDS-FSM, showing gradual urine output (969 ± 29 µL) till the 4th h of the study, providing sustained urine output yet a predictable therapeutic response. The solidification of SNEDDS effectively addresses challenges associated with spontaneous drug release and precipitation observed in liquid SNEDDS, highlighting the potential benefits of solid SNEDDS in improving the therapeutic response of furosemide.
ABSTRACT
BACKGROUND: The use of natural products in skin care has been valued for their tremendous therapeutic benefits since ancient times. The current study was aimed at exploring the Leptadenia pyrotechnica plant extract and development of a stable emulgel loaded with the same extract to assess its cosmeceutical potentials. METHODOLOGY: A stable emulgel loaded with methanolic plant extract along with its control gel was prepared by homogenization. The antioxidant potential of extracts prepared in different solvents (methanol MLP, ethanol ELP, n-hexane nLP, ethyl acetate EALP, and petroleum ether PLP) was determined by DPPH scavenging activity. The presence of phytochemicals was confirmed by total phenolic and flavonoid content analysis (TPC/TFC). HPLC was used for quantification of bioactive components. FTIR analysis was performed for confirmation of functional groups. SPF was calculated via spectroscopic analysis for extract, control gel, and extract loaded emulgel. Stability studies included physical evaluation, pH, conductivity, spreadability, and rheological testing of both control and test emulgels at different temperatures, i.e., 8 °C ± 1, 25 °C ± 1, 40 °C ± 1, 40 °C ± 1 with RH of 75% for a period of 90 days. RESULTS: DPPH radical scavenging activity showed the highest antioxidant activity of 85.5% ± 2.78 for MLP. TPC and TFC were also found to be highest for the methanolic fraction, i.e., 190.98 ± 0.40 mgGAE/g and 128.28 ± 2.64 mgQE/g, respectively. The SPF of methanolic extract, placebo gel, and LPEG was 13.43 ± 0.46, 2.37 ± 0.33, and 7.28 ± 0.56, respectively. HPLC assay confirmed the presence of catechin, vanillic acid, caffeic acid, and sinapinic acid. Rheological analysis showed that formulation has pseudo-plastic flow behavior. Other stability tests also revealed that prepared emulgel is a stable one. CONCLUSION: A stable emulgel loaded with Leptadenia pyrotechnica plant extract was successfully prepared and characterized for its cosmetic effects.
ABSTRACT
This study aimed to prepare tamsulosin hydrochloride (HCl)-loaded in situ gelling formulation by using hydroxypropyl methylcellulose (HPMC), gellan gum, poloxamer 188, and benzalkonium chloride. Physicochemical evaluation of formulations included determination of pH, viscosity, gelation time, gel strength, drug content, and sterility. In silico study was performed to analyze interactions between polymers, drug, and mucin glycoprotein. In vitro degradation time, drug release, ex vivo mucoadhesion time, permeation, in vivo pharmacokinetics, and stability studies were performed to assess the formulation. Formulations were transparent and displayed acceptable physicochemical attributes. Tamsulosin HCl and polymers interacted via non-covalent interactions. HPMC formed hydrogen bonds, hydrophobic and van der Waals interactions with mucin protein while the drug formed hydrogen bonds only. Gel formulation degraded in simulated nasal fluid within 24 h. In situ gelling formulation showed 83.8 ± 1.7% drug release and remained adhered to the mucosa for 24.5 ± 1 h. A higher (~ 1.85 times) drug permeation was recorded through mucosa within 6 h by in situ gelling formulation when compared to control counterparts (aqueous solution of drug and in situ gelling formulation without poloxamer 188). Nasal administration of tamsulosin HCl by using in situ gelling formulation led to a ~ 3.3 and ~ 3.5 times, respectively, higher Cmax (maximum plasma concentration) and AUCtotal (total area under the curve) than the orally administered aqueous solution. Relative bioavailability of drug delivered by nasal in situ gelling formulation was 3.5 times the oral counterpart. These results indicated that the prepared in situ gelling formulation can act as a promising candidate for systemic administration of tamsulosin HCl.
Subject(s)
Nasal Mucosa , Poloxamer , Tamsulosin/metabolism , Poloxamer/chemistry , Administration, Intranasal , Nasal Mucosa/metabolism , Mucins/metabolism , Gels/chemistry , Drug Delivery SystemsABSTRACT
Despite several novel and innovative approaches, clinical translation of oral insulin delivery into commercially viable treatment is still challenging due to its poor absorption and rapid degradation in GIT. Thus, an insulin-SDS hydrophobic ion pair loaded self-microemulsifying drug delivery system (SMEDDS) was formulated to exploit the hypoglycemic effects of orally delivered insulin. Insulin was initially hydrophobically ion paired with sodium dodecyl sulphate (SDS) to enhance its lipophilicity. The successful complexation of Insulin-SDS was confirmed by FTIR and surface morphology was evaluated using SEM. Stability of insulin after its release from HIP complex was evaluated using SDS PAGE. Subsequently, Ins-SDS loaded SMEDDS was optimized using two factorial designs. In vitro stability of insulin entrapped in optimized SMEDDS against proteolytic degradation was also assessed. Further, antidiabetic activity of optimized Ins-SDS loaded SMEDDS was evaluated in diabetic rats. Insulin complexed with SDS at 6:1 (SDS/insulin) molar ratio with almost five-fold increased lipophilicity. The SMEDDS was optimized at 10% Labraphil M2125 CS, 70% Cremophore EL, and 20% Transcutol HP with better proteolytic stability and oral antidiabetic activity. An Ins-SDS loaded SMEDDS was successfully optimized. Compared with insulin and Ins-SDS complex, the optimized SMEDDS displayed considerable resistance to GI enzymes. Thus, the SMEDDS showed potential for effective delivery of macromolecular drugs with improved oral bioavailability.
ABSTRACT
Here, we evaluate the feasibility of co-loading plain ranitidine hydrochloride (RHCl) and microencapsulated flurbiprofen (FBP) in a Lycoat® RS780-based oral fast disintegrating film (ODF). These films were developed by the solvent casting method to minimize the adverse effects of FBP and reduce the dosage form burden on patients. Optimized FBP microparticles (M3) with an average size of 21.2 ± 9.2 µm were loaded alone (F1) and in combination with plain RHCl (F2) in the composite ODF. All films were evaluated physicomechanically and physicochemically. These films were resilient, flexible, and disintegrated within thirty seconds. SEM images showed intact FBP microparticles in both formulations and, moreover, did not observe an interaction between the drug and film components. Microencapsulated FBP was released in a controlled manner over 48 h from the proposed formulations, while RHCl was released within 5 min from F2. After in vitro evaluation, formulations were also tested for in vivo anti-inflammatory activity, cytokine (TNF-α and IL-6) levels, and gastroprotective effects in rats. The anti-inflammatory activity and gastroprotective effect of F2 were markedly higher than pure FBP and other synthesized formulations (M3 and F1). The average score of gastric lesions was in the order of pure FBP (15.5 ± 1.32) > M3 (8 ± 2) > F1 (1 ± 0.5) > F2 (0.5 ± 0) > control (0). Additionally, F2 showed a sustained anti-inflammatory effect up to 10 h in the rat paw edema model. Furthermore, F2 also markedly reduced TNF-α and IL-6 levels. Conclusively, the Lycoat® RS780-based composite film could be a promising carrier for the co-loading of microencapsulated FBP with RHCl. In the future, an optimized formulation (F2) could be capable of countering the issues related to multiple drug administration in geriatric patients and evading the gastric irritation associated with FBP.
ABSTRACT
AIM: This study was aimed to develop rabies vaccine incorporated microneedle (MN) patches and evaluate the immunogenicity of prepared formulations in combination with iontophoresis. METHODS: Patches comprising of polyvinyl pyrrolidone, hyaluronic acid and polyethylene glycol 400 were engineered by vacuum micromolding technique. Physical evaluation of patches included determination of folding endurance, % swelling and morphological features. In vitro release study was performed in skin simulant agarose gel using model drug (methylene blue) loaded patches. In vitro insertion ability was assessed using stratum corneum simulant parafilm. In vivo insertion study was performed in rats. Immunogenicity was evaluated in dogs by determining immunoglobulin G (IgG) and rabies virus neutralizing antibodies (RVNA) titer. RESULTS: Patches displayed uniformly distributed microprojections with pointed tips and smooth surface, ~ 70% swelling, remained intact for ~ 200 foldings and successfully penetrated the parafilm. The area covered by model drug across agarose gel was almost double following treatment with MN-iontophoresis combination (MNdi) compared to MN alone (MNdo). Histological examination of rat skin treated with vaccine laden MN (MNvo) and MN-iontophoresis combination (MNvi) confirmed the formation of grooves in epidermis without any damage to the deep vasculature. A ~ 73% and ~ 206% increase (compared to untreated counterpart) was observed in the IgG titer of MNvo and MNvi treated dogs, respectively. The RVNA titer was increased by ~ 1.2 and ~ 2.2 times (compared to threshold value) after MNvo and MNvi treatment, respectively. CONCLUSION: MN-iontophoresis combination provided relatively potent immunogenic response over the conventional intramuscular injection, hence, can be used for administering vaccines transcutaneously.
Subject(s)
Rabies Vaccines , Rats , Animals , Dogs , Iontophoresis/methods , Paraffin , Sepharose , Administration, Cutaneous , Skin , Drug Delivery Systems , Needles , Immunoglobulin GABSTRACT
This study aimed to fabricate clarithromycin laden Eudragit S-100-based microfibers (MF), microfibers coated film (MB), clarithromycin loaded polyvinyl pyrollidone, hyaluronic acid and sorbitol-based dissolving microneedle patches (CP) and microfibers coated microneedle patches (MP). Morphological and phase analysis of formulations were carried out by scanning electron microscopy and differential scanning calorimetry, X-ray diffraction, respectively. Substrate liquefaction test, in vitro drug release, antimicrobial assay and in vivo antibiofilm studies were performed. MF exhibited a uniform surface and interconnected network. Morphological analysis of CP revealed sharp-tipped and uniform-surfaced microstructures. Clarithromycin was incorporated within MF and CP as amorphous solid. Liquefaction test indicated hyaluronate lyase enzyme responsiveness of hyaluronic acid. Fibers-based formulations (MF, MB and MP) provided an alkaline pH (7.4) responsive drug release; â¼79 %, â¼78 % and â¼81 %, respectively within 2 h. CP showed a drug release of â¼82 % within 2 h. MP showed â¼13 % larger inhibitory zone against Staphylococcus aureus (S. aureus) as compared to MB and CP. A relatively rapid eradication of S. aureus in infected wounds and subsequent skin regeneration was observed following MP application as compared to MB and CP indicating its usefulness for the management of microbial biofilms.
Subject(s)
Clarithromycin , Staphylococcal Infections , Humans , Clarithromycin/pharmacology , Staphylococcus aureus , Hyaluronic Acid/chemistry , Drug Delivery Systems , Administration, Cutaneous , Biofilms , NeedlesABSTRACT
The aim of this study was to fabricate celecoxib-loaded chitosan/guar gum (CS/GG) single (SC) and dual (DC) crosslinked hydrogel beads using the ionotropic gelation approach. The prepared formulations were evaluated for entrapment efficiency (EE%), loading efficiency (LE%), particle size and swelling studies. The performance efficiency was assessed by in vitro drug release, ex-vivo mucoadhesion, permeability, ex-in vivo swelling and in vivo anti-inflammatory studies. The EE% was found to be ~55% and ~44% for SC5 and DC5 beads, respectively. The LE% was ~11% and ~7% for SC5 and DC5 beads, respectively. The beads showed a matrix-like network with thick fibers. The particle size of beads ranged from ~2.74 to 1.91 mm. About 74% and 24% celecoxib was released from SC and DC hydrogel beads, respectively, within 24 h. The SC formulation showed higher %swelling and permeability than the DC counterpart, while the %mucoadhesion was relatively higher for DC beads. During the in vivo study, a significant decrease in the inflammation of the rat paw and inflammatory markers including C-reactive proteins (CRP) and interleukin-6 (IL-6) was observed following treatment with the prepared hydrogel beads; however, the SC formulation showed better therapeutic efficiency. In conclusion, celecoxib-loaded crosslinked CS/GG hydrogel beads can provide sustained drug release and act as potential candidates for managing inflammatory conditions.
ABSTRACT
This study is aimed to fabricate tetanus toxoid laden microneedle patches by using a polymeric blend comprising of polyvinyl pyrrolidone and sodium carboxymethyl cellulose as base materials and sorbitol as a plasticizer. The tetanus toxoid was mixed with polymeric blend and patches were prepared by using vacuum micromolding technique. Microneedle patches were evaluated for physical attributes such as uniformity of thickness, folding endurance, and swelling profile. Morphological features were assessed by optical and scanning electron microscopy. In vitro performance of fabricated patches was studied by using bicinchoninic acid assay (BCA). Insertion ability of microstructures was studied in vitro on model skin parafilm and in vivo in albino rat. In vivo immunogenic activity of the formulation was assessed by recording immunoglobulin G (IgG) levels, interferon gamma (IFN-γ) levels, and T-cell (CD4+ and CD8+) count following the application of dosage forms. Prepared patches, displaying sharp-tipped and smooth-surfaced microstructures, remained intact after 350 ± 36 foldings. Optimized microneedle patch formulation showed ~ 74% swelling and ~ 85.6% vaccine release within an hour. The microneedles successfully pierced parafilm. Histological examination of microneedle-treated rat skin confirmed disruption of epidermis without damaging the underneath vasculature. A significant increase in IgG levels (~ 21%), IFN-γ levels (~ 30%), CD4+ (~ 41.5%), and CD8+ (~ 48.5%) cell count was observed in tetanus vaccine-loaded microneedle patches treated albino rats with respect to control (untreated) group at 42nd day of immunization. In conclusion, tetanus toxoid-loaded microneedle patches can be considered as an efficient choice for transdermal delivery of vaccine without inducing pain commonly experienced with hypodermic needles.
Subject(s)
Paraffin , Tetanus Toxoid , Administration, Cutaneous , Drug Delivery Systems/methods , Immunoglobulin G , Needles , Polymers/chemistry , Transdermal Patch , Animals , RatsABSTRACT
Objectives: To report trends in bacteriological spectrum and antibiotic susceptibility on blood culture in admitted pediatric cardiac patients at a Tertiary Childcare Health Facility. Methods: This cross-sectional observational study was conducted at the Department of Pediatric Cardiology, The Children's Hospital and Institute of Child Health, Multan from January 2018 to December 2020. We included admitted children of both genders aged one day to 12 years and whose blood sample was sent for blood culture analysis. Gram staining was used to identify isolated organisms. Distribution of types of strains, bacterial isolates and antimicrobial sensitivity/resistance were recorded. Results: During the study period, a total of 772 blood samples were sent for blood culture analysis, out of which, 154 (19.9%) turned out to be positive. Mean age was noted to be 1.12±2.3 years. Gram negative rods were the most frequently noted strains found among 69 (44.8%) cases. A total of 131 strains were found to have bacterial isolates. Salmonella typhi was the commonest bacterial agent noted in 30 (19.4%) cases while Coagulase Negative Staphylococcus in 18 (11.7%) and acinetobacter baumannii in 16 (10.4%). Conclusion: Blood culture positivity rate was found to be 19.9%. Gram negative rods were the most frequently noted strains. Salmonella typhi, Coagulase Negative Staphylococcus and Acinetobacter baumannii were found to be the commonest bacterial isolates responsible. Routinely used antibiotics like Ciprofloxacin, Cefotaxime, Ceftizadime and Ampicillin were found to have high rates of resistance against most commonly found bacterial isolates.
ABSTRACT
The study was aimed at designing and characterizing the ondansetron hydrochloride (OND) bearing agarose (AG), and hydroxypropyl methyl cellulose (HPMC) mucoadhesive buccal films employing glycerol as a plasticizer. The buccal delivery of ondansetron hydrochloride was remarkably boosted by employing physical (iontophoresis) and chemical enhancement approaches (chemical penetration enhancers). To explore the influence of different formulation components, i.e., agarose, hydroxypropyl methyl cellulose (HPMC), and glycerol on various evaluating parameters, i.e., tensile strength, swelling index, ex vivo mucoadhesion time, and subsequently on in vitro drug release, a D-optimal design was opted. A buccal film bearing OND was mounted on bovine buccal mucosa for ex vivo permeation studies and impact of chemical and physical enhancement techniques on the permeation profile was also analysed. A linear release profile was revealed in in vitro drug release of OND over 60 minutes and outcomes ascertained the direct relationship between HPMC content and in vitro drug release and inverse relationship was depicted by AG content. The FTIR and DSC thermal analysis was executed to determine the physicochemical interactions and results exposed no chemical interactions between drug and polymers. The drug (OND) appeared as tiny crystals on smooth film surface during scanning electron microscopy (SEM) analysis. A notable enhancement in permeation flux, i.e., 761.02 µg/min of OND during ex vivo permeation studies was witnessed after the application of current (0.5-1 mA) without any time lag and with enhancement ratio of 3.107. A time lag of 15 minutes, 19 minutes, and 26 minutes with permeation flux of 475.34 µg/min, 399.35 µg/min, and 244.81 µg/min was observed after chemical enhancer pretreatment with propylene glycol, Tween 80, and passive, respectively. Rabbit was employed as the experimental animal for pharmacokinetic studies (in vivo) and cats for pharmacological activity (in vivo), and the results illustrated the enhanced bioavailablity (2.88 times) in the iontophoresis animal group when compared with the rabbits of control group. Likewise, a remarkable reduction in emesis events was recorded in cats of iontophoresis group. Conclusively, the histopathological examinations on excised buccal mucosa unveiled no severe necrotic or cytopathetic outcomes of current.
Subject(s)
Iontophoresis , Ondansetron , Animals , Cats , Cattle , Drug Delivery Systems/methods , Glycerol , Hypromellose Derivatives/chemistry , Methylcellulose , Mouth Mucosa , Ondansetron/pharmacology , Rabbits , SepharoseABSTRACT
Lansoprazole (LPZ) show poor bioavailability because of first pass effect and absorption factors. The floating delivery systems could reduce fluctuations in plasma drug concentration through maintaining desirable plasma drug concentration. The objective of present study was to enhance bioavailability despite first pass effect through continuous availability of drug from floating system. Gum tragacanth (GT) and itaconic acid (IA) based floating hydrogels (FH) were synthesized. Parameters optimized were; microwave radiation exposure time, pH, GT:IA ratio and concentration of the glutaraldehyde. Optimized FH were evaluated for entrapment efficiency (% EE), in-vitro release, FTIR, SEM, and in- vitro and in-vivo floating study. Finally, pharmacokinetic was evaluated in ulcer-induced SD rats. Grafting percentage, swelling ratio and %EE of LPZ was 115%, Ì´250% and 90%, respectively. Microwave radiation exposure time, pH of reaction medium, GT:IA ratios and cross linker concentration were 2 min, pH 5, ratios 2:1 and 0.02%, respectively. The optimized FH showed acceptable floating behavior. The X-ray images revealed that hydrogels remained floated over gastric contents up to 24 hours. The in-vitro release and pharmacokinetics revealed availability of LPZ upto to 24h in-vitro and in ulcer-induced SD rats, respectively. The present hydrogels based floating system of lansoprazole is capable to extend the gastric residence time upto 24 hours.
Subject(s)
Lansoprazole/chemistry , Lansoprazole/pharmacokinetics , Proton Pump Inhibitors/chemistry , Proton Pump Inhibitors/pharmacokinetics , Animals , Area Under Curve , Delayed-Action Preparations , Half-Life , Lansoprazole/administration & dosage , Proton Pump Inhibitors/administration & dosage , Rats , Rats, Sprague-DawleyABSTRACT
OBJECTIVE: To identify echocardiography-based myocardial changes in children with severe acute malnutrition. Methods: The prospective study was conducted from January to November 2020 at a territory care paediatric hospital in Multan, Pakistan, and comprised severe acute malnutrition patients of either gender aged 1-60 months and an equal number of matching healthy controls. Malnutrition was categorised using the World Health Organisation criteria. Echocardiographic evaluation was done by expert cardiologists. Values for ejection fraction shortening, left ventricular mass, E/A wave ratio as well as mitral and tricuspid annular plane systolic excursions were noted. Data was analysed using SPSS 21. RESULTS: Of the 150 subjects, 75(50%) each were cases and controls. Age and gender were not significantly different between the groups (p>0.05). Left ventricular mass and left ventricular mass index with body surface area were significantly reduced in the cases compared to the controls, and the same was the case with left ventricular ejection fractional shortening (p<0.05). There was no significant difference between the groups in terms of E/A wave ratio as well as mitral and tricuspid annular plane systolic excursions (p>0.05). Among the cases, cardiac evaluation showed 26(34.6%) were kwashiorkor and 49(65.3%) were marasmic patients. CONCLUSIONS: Left ventricular parameters in malnourished children were found to be reduced. As such, the assessment of these parameters may appear to be a significant indicator for timely identification of cardiac malfunction in severe acute malnutrition cases.
Subject(s)
Echocardiography , Severe Acute Malnutrition , Humans , Child , Prospective Studies , Myocardium , Heart Ventricles/diagnostic imaging , Stroke VolumeABSTRACT
Abstract The objective of the present investigation was to design, optimize and characterize the gastro retentive floating levofloxacin tablets and perform in-vivo evaluation using radiographic imaging. The floating tablets were prepared by using polymers i.e hydroxy propyl methyl cellulose (HPMC-K4M) and carbopol-940 individually and in combination by nonaquous granulation method. All the Formulations were evaluated for swelling index (S.I), floating behavior and in-vitro drug release kinetics. The compatibility study of levofloxacin with other polymers was investigated by FTIR, DSC, TGA and XRD. Results from FTIR and DSC revealed no chemical interaction amongst the formulation components. The optimized formulation (F11) showed floating lag time (FLT), total floating time (TFT) swelling index (S.I) of 60 sec, >16h and approximately 75 %, respectively. Moreover, F11 showed zero order levofloxacin release in simulated gastric fluid over the period of 6 h. X-ray studies showed that total buoyancy time was able to delay the gastric emptying of levofloxacin floating tablets in rabbits for more than 4 hours. In conclusion the optimized formulation (F11) can be used for the sustained delivery of levofloxacin for the treatment of peptic ulcer.
Subject(s)
Drug Liberation , Peptic Ulcer/classification , Tablets/pharmacology , X-Rays/adverse effects , In Vitro Techniques/instrumentation , Spectroscopy, Fourier Transform Infrared , Drug Compounding/instrumentation , Process Optimization/analysis , Levofloxacin/analysis , Gastric Emptying/drug effectsABSTRACT
The limited solubility of clarithromycin (CAM), coupled with low bioavailability and rapid elimination, are major shortcomings, needed to be addressed to achieve optimum therapeutic goals. Therefore, sustained-release (SR) tablets containing solid dispersion (SD) granules of CAM were prepared in this study. Initially, SD granules of CAM were prepared by hot melt extrusion (HME) technique using Kollidon VA64 as a hydrophilic carrier. The saturation solubility of SD showed almost 4.5-fold increase as compared to pure CAM in pH 6.8 medium. In vitro drug dissolution data indicated a substantial increase in the dissolution of SD as compared to that of pure CAM. The thermal stability of drug, carrier, and SD at elevated HME temperatures was evident from the results of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Powder X-ray diffraction (PXRD) data and scanning electron microscope (SEM) images revealed a decrease in the crystallinity and the uniform dispersion of drug, respectively. Moreover, Fourier transformed infrared spectroscopy (FT-IR) data confirmed the formation of hydrogen bond between the carbonyl group of drug and the hydroxyl group of carrier. SD loaded sustained-release (SD-SR) matrix tablets were prepared with hydrophobic polymers (Eudragit RS100 and Eudragit RL100). The pH-independent swelling and permeability of both polymers were responsible for the sustained drug release from SD-SR tablets. Pharmacokinetic (PK) studies suggested a 3.4-fold increase in the relative bioavailability of SD-SR tablets as compared to that of pure CAM.
Subject(s)
Clarithromycin , Drug Carriers , Calorimetry, Differential Scanning , Delayed-Action Preparations , Drug Compounding , Hydrogen-Ion Concentration , Solubility , Spectroscopy, Fourier Transform Infrared , TabletsABSTRACT
In the present study nanotechnology approach, i.e., a cyclodextrin (CD) based carbonate nanosponge was used to improve the solubility and dissolution of ibuprofen. Solvent and ultrasound assisted methods were used to prepare nanosponges using two CDs (ß-CD and 2-hydroxypropyl-ß-CD (2HP-ß-CD)) and a cross-linker (CL) diphenyl carbonate (DPC) in varying molar ratios. Nanosponges were investigated for their solubilizing efficiency and phase solubility studies. Structural analysis by Fourier transform infrared (FTIR) and powder X-ray diffraction (PXRD), thermo-analytical characterization by differential scanning calorimetry (DCS), morphology by scanning electron microscopy (SEM). In-vitro drug release followed by in-vivo analgesic and anti-inflammatory studies were performed. 2HP-ß-CD based nanosponges (molar ratio 0.01:0.04) prepared by ultrasound assisted method showed the highest solubilizing efficiency (i.e., 4.28 folds). Stability constant values showed that all complexes were stable. Inclusion complexes of drug was confirmed by PXRD and DSC. SEM images showed porous structures confirming the formation of cross-linked network. Particle size was in the range of 296.8±64 to 611.7±32nm. In-vitro release studies showed enhanced dissolution profile from nanosponge formulation (~94% from I11) as compared to the pure drug (~45% Ibuprofen) in 120min. Significant (p<0.05) extent of pain inhibition and anti-inflammatory activity was observed for nanosponge formulation when compared with the pure drug. CD based carbonate nanosponges with better solubility, enhanced release profile, improved analgesic and anti-inflammatory activity were successfully formulated for ibuprofen.
Subject(s)
Carbonates , Cyclodextrins , Drug Liberation , Ibuprofen/pharmacokinetics , Nanostructures , Nociception/drug effects , Animals , Calorimetry, Differential Scanning , Ibuprofen/administration & dosage , Ibuprofen/pharmacology , Microscopy, Electron, Scanning , Nanoparticle Drug Delivery System , Nanotechnology , Powder Diffraction , Rats , Solubility , Spectroscopy, Fourier Transform InfraredABSTRACT
This study aimed to fabricate and characterize polymeric microneedle patches for rapid and non-invasive administration of enoxaparin across skin layers. The patches comprising of PVA, sorbitol and enoxaparin sodium were prepared by employing micromolding technique. Formulated patches were characterized physicochemically by folding endurance, dimensional analysis and swelling study, morphologically by optical and scanning electron microscopy and thermally by thermogravimetric analysis. Moreover, performance efficiency of prepared polymeric device was analyzed by in-vitro drug release study and piercing ability. Prepared patches showed appropriate dimensions and folding endurance (i.e., ~1100) indicating satisfactory integrity of polymeric device. Patches exhibited appropriately distanced needles with pointed tips in optical and scanning electron microscopy analysis. Thermogravimetric analysis proved thermal stability of formulation ingredients and prepared patches. Swelling percentage was >110 % suggesting that prepared formulation would allow penetration of physiological fluids in its polymeric network. Maximum (~89%) drug was released within ~2 hours during in-vitro release study. In-vitro piercing ability experiments suggested that prepared patches successfully breached skin barrier stratum corneum. It is concluded that prepared microneedle device can serve as a potential alternative of currently employed invasive parenteral route for rapid and efficient administration of enoxaparin sodium in the systemic circulation.
Subject(s)
Anticoagulants/administration & dosage , Enoxaparin/analogs & derivatives , Epidermis , Needles , Polyvinyl Alcohol , Sorbitol , Transdermal Patch , Administration, Cutaneous , Drug Delivery Systems , Drug Liberation , Enoxaparin/administration & dosage , Heparin, Low-Molecular-Weight/administration & dosage , Materials Testing , Microscopy , Microscopy, Electron, Scanning , Paraffin , Skin , ThermogravimetryABSTRACT
BACKGROUND & OBJECTIVE: Persistent pulmonary hypertension of the newborn (PPHN) is described as severe respiratory failure along with hypoxaemia. PPHN is known to be linked with high morbidity and mortality around the world. This study was planned to determine the postnatal causes and assess the severity of persistent pulmonary hypertension of newborn in babies presenting to the Children's Hospital, Multan. METHODS: This observational study was conducted at the Department of Paediatric Cardiology, The Children Hospital &Institute of Child Health, Multan, Pakistan from July to December 2019. A total of 122 confirmed cases of PPHN admitted having gestational age above 34 weeks were enrolled. Demographic data of the newborns was recorded along with maternal medical history, pregnancy status and postnatal causes of PPHN. Severity of PPHN was also recorded. RESULTS: Out of a total of 122 cases of PPHN, 81 (66.3%) were male. Majority, 78 (64.0%) had gestational age above 37 weeks. Mode of delivery as cesarean section was noted in 70 (57.4%). Meconium aspiration syndrome 52 (42.6%), birth asphyxia 48 (39.3%), respiratory distress syndrome 23 (18.8%) and sepsis 33 (27.0%) were found to be the commonest causes of PPHN. Severe PPHN was found to be the most frequent, noted among 63 (51.6%) while Moderate PPHN was observed in 40 (32.8%) and Mild PPHN in 19 (15.6%). Morality was noted among 26 (21.3%) of cases. CONCLUSION: Meconium aspiration syndrome, birth asphyxia and respiratory distress syndrome were the commonest postnatal causes of PPHN. Severe PPHN was found to be the most frequent form of PPHN.
ABSTRACT
Development of dimenhydrinate (DMN) emulgel formulation has been described in this work with enhanced permeation for transdermal delivery of DMN for effective management of motion sickness. Various DMN emulgel formulations were prepared using central composite design in response surface methodology. Propylene glycol and olive oil were used in varying ratios as permeation enhancers along-with carbopol-934 as gelling agent. Prepared formulations were evaluated by physico-chemical properties, stability and Fourier transform infrared spectroscopy (FTIR) studies. In-vitro drug release was studied using cellophane membrane. Formulation F2 showed maximum drug permeation following diffusion-based release mechanism and was used in further studies. Rat skin was used in Franz cell for ex-vivo studies to determine various permeation kinetic parameters. FTIR studies provided no evidence of chemical interaction between DMN and polymers used, whereas molecular docking revealed formation of a stable complex in the presence of aqueous environment with stable intermolecular binding and the complex was well hydrated. No evidence of skin irritation was observed in human volunteers following application of the optimized formulation. Histopathology data of the rat skin showed a decreased proliferation of the lymphocytes whereas monocytes were induced. In conclusion, combination of propylene glycol and olive oil was successfully employed for delivery of DMN through transdermal route with good permeability and prolonged release time that can be highly beneficial in treating motion sickness in unusual circumstances.