Challenges in making ideal cryo-EM samples.

Recognizing that interaction with the air-water interface (AWI) is a major challenge for cryo-EM, we first review current approaches designed to avoid it. Of these, immobilizing particles on affinity grids is arguably the most promising. In addition, we review efforts to gain more reliable control of the sample thicknesses, not the least important reason being to prevent immobilized particles from coming in contact with the AWI of the remaining buffer. It is emphasized that avoiding such a contact is as important for cryo-ET as for single-particle cryo-EM. Finally, looking to the future, it is proposed that immobilized samples might be used to perform time-resolved biochemical experiments directly on EM grids rather than just in test tubes or cuvettes.

Recording high-resolution images of two-dimensional crystals of membrane proteins.

Principles underlying the recording of high-quality/resolution images of two-dimensional crystals of membrane proteins are discussed in the context of instrumental conditions and operational procedures. A detailed example of low-dose microscope settings is provided along with an overview of a program that implements a computer-aided data acquisition procedure.

A method for integrative structure determination of protein-protein complexes.

MOTIVATION: Structural characterization of protein interactions is necessary for understanding and modulating biological processes. On one hand, X-ray crystallography or NMR spectroscopy provide atomic resolution structures but the data collection process is typically long and the success rate is low. On the other hand, computational methods for modeling assembly structures from individual components frequently suffer from high false-positive rate, rarely resulting in a unique solution. RESULTS: Here, we present a combined approach that computationally integrates data from a variety of fast and accessible experimental techniques for rapid and accurate structure determination of protein-protein complexes. The integrative method uses atomistic models of two interacting proteins and one or more datasets from five accessible experimental techniques: a small-angle X-ray scattering (SAXS) profile, 2D class average images from negative-stain electron microscopy micrographs (EM), a 3D density map from single-particle negative-stain EM, residue type content of the protein-protein interface from NMR spectroscopy and chemical cross-linking detected by mass spectrometry. The method is tested on a docking benchmark consisting of 176 known complex structures and simulated experimental data. The near-native model is the top scoring one for up to 61% of benchmark cases depending on the included experimental datasets; in comparison to 10% for standard computational docking. We also collected SAXS, 2D class average images and 3D density map from negative-stain EM to model the PCSK9 antigen-J16 Fab antibody complex, followed by validation of the model by a subsequently available X-ray crystallographic structure.

Fabs enable single particle cryoEM studies of small proteins.

In spite of its recent achievements, the technique of single particle electron cryomicroscopy (cryoEM) has not been widely used to study proteins smaller than 100 kDa, although it is a highly desirable application of this technique. One fundamental limitation is that images of small proteins embedded in vitreous ice do not contain adequate features for accurate image alignment. We describe a general strategy to overcome this limitation by selecting a fragment antigen binding (Fab) to form a stable and rigid complex with a target protein, thus providing a defined feature for accurate image alignment. Using this approach, we determined a three-dimensional structure of an ∼65 kDa protein by single particle cryoEM. Because Fabs can be readily generated against a wide range of proteins by phage display, this approach is generally applicable to study many small proteins by single particle cryoEM.

Visualizing proteins and macromolecular complexes by negative stain EM: from grid preparation to image acquisition.

Single particle electron microscopy (EM), of both negative stained or frozen hydrated biological samples, has become a versatile tool in structural biology. In recent years, this method has achieved great success in studying structures of proteins and macromolecular complexes. Compared with electron cryomicroscopy (cryoEM), in which frozen hydrated protein samples are embedded in a thin layer of vitreous ice, negative staining is a simpler sample preparation method in which protein samples are embedded in a thin layer of dried heavy metal salt to increase specimen contrast. The enhanced contrast of negative stain EM allows examination of relatively small biological samples. In addition to determining three-dimensional (3D) structure of purified proteins or protein complexes, this method can be used for much broader purposes. For example, negative stain EM can be easily used to visualize purified protein samples, obtaining information such as homogeneity/heterogeneity of the sample, formation of protein complexes or large assemblies, or simply to evaluate the quality of a protein preparation. In this video article, we present a complete protocol for using an EM to observe negatively stained protein sample, from preparing carbon coated grids for negative stain EM to acquiring images of negatively stained sample in an electron microscope operated at 120kV accelerating voltage. These protocols have been used in our laboratory routinely and can be easily followed by novice users.

The Dam1 kinetochore ring complex moves processively on depolymerizing microtubule ends.

Chromosomes interact through their kinetochores with microtubule plus ends and they are segregated to the spindle poles as the kinetochore microtubules shorten during anaphase A of mitosis. The molecular natures and identities of coupling proteins that allow microtubule depolymerization to pull chromosomes to poles during anaphase have long remained elusive. In budding yeast, the ten-protein Dam1 complex is a critical microtubule-binding component of the kinetochore that oligomerizes into a 50-nm ring around a microtubule in vitro. Here we show, with the use of a real-time, two-colour fluorescence microscopy assay, that the ring complex moves processively for several micrometres at the ends of depolymerizing microtubules without detaching from the lattice. Electron microscopic analysis of 'end-on views' revealed a 16-fold symmetry of the kinetochore rings. This out-of-register arrangement with respect to the 13-fold microtubule symmetry is consistent with a sliding mechanism based on an electrostatically coupled ring-microtubule interface. The Dam1 ring complex is a molecular device that can translate the force generated by microtubule depolymerization into movement along the lattice to facilitate chromosome segregation.

High-throughput film-densitometry: an efficient approach to generate large data sets.

A film-handling machine (robot) has been built which can, in conjunction with a commercially available film densitometer, exchange and digitize over 300 electron micrographs per day. Implementation of robotic film handling effectively eliminates the delay and tedium associated with digitizing images when data are initially recorded on photographic film. The modulation transfer function (MTF) of the commercially available densitometer is significantly worse than that of a high-end, scientific microdensitometer. Nevertheless, its signal-to-noise ratio (S/N) is quite excellent, allowing substantial restoration of the output to "near-to-perfect" performance. Due to the large area of the standard electron microscope film that can be digitized by the commercial densitometer (up to 10,000 x 13,680 pixels with an appropriately coded holder), automated film digitization offers a fast and inexpensive alternative to high-end CCD cameras as a means of acquiring large amounts of image data in electron microscopy.

Formation of a dynamic kinetochore- microtubule interface through assembly of the Dam1 ring complex.

How kinetochore proteins form a dynamic interface with microtubules is largely unknown. In budding yeast, the 10-protein Dam1 complex is an Aurora kinase target that plays essential roles maintaining the integrity of the mitotic spindle and regulating interactions with the kinetochore. Here, we investigated the biochemical properties of purified Dam1 complex. The complex oligomerized into rings around microtubules. Ring formation was facilitated by microtubules but could occur in their absence. Mutant alleles led to partially assembled complexes or reduced microtubule binding. The interaction between rings and microtubules is mediated by the C termini of both Dam1 and alphabeta-tubulin. Ring formation promotes microtubule assembly, stabilizes against disassembly, and promotes bundling. A GTP-tubulin lattice is the preferred binding partner for the complex, and Dam1 rings can exhibit lateral mobility on microtubules. These observations suggest a mechanism by which the kinetochore can recognize and stay attached to the plus ends of microtubules.