Enhancing Adhesion Properties of Commodity Polymers through Thiol-Catechol Connectivities: A Case Study on Polymerizing Polystyrene-Telechelics via Thiol-Quinone Michael-Polyaddition.

Segmented block copolymers with adhesive functionality bridges in between are synthesized through the combination of controlled radical polymerization (CRP) and thiol-quinone Michael-polyaddition. CRP provides a set of α,ω-dithiol polystyrenes (PS), which react as telechelics with a low molecular weight bisquinone, resulting in thiol-catechol connectivities (TCCs). By introducing as little as 3 mol % of TCC functionalities, the bonding of the polymer on dry and wet aluminum surfaces is significantly improved while keeping the integrity of the PS segments undisturbed to constitute favorable bulk properties. This improvement is evidenced by reaching up to 3.8 MPa adhesive strength, representing a 600% increase compared to nonfunctional PS.

Ligating Catalytically Active Peptides onto Microporous Polymers: A General Route Toward Specifically-Functional High Surface Area Platforms.

A versatile post-synthetic modification strategy to functionalize a high surface area microporous network (MPN-OH) by bio-orthogonal inverse electron-demand Diels-Alder (IEDDA) ligation is presented. While the polymer matrix is modified with a readily accessible norbornene isocyanate (Nor-NCO), a series of functional units presenting the robust asymmetric 1,2,4,5-tetrazine (Tz) allows easy functionalization of the MPN by chemoselective Nor/Tz ligation. A generic route is demonstrated, modulating the internal interfaces by introducing carboxylates, amides or amino acids as well as an oligopeptide d-Pro-Pro-Glu organocatalyst. The MPN-Pz-Peptide construct largely retains the catalytic activity and selectivity in an enantioselective enamine catalysis, demonstrates remarkable availability in different solvents, offers heterogeneous organocatalysis in bulk and shows stability in recycling settings.

Statistical Copolymers that Mimic Aspects of Mussel Adhesive Proteins: Access to Robust Adhesive-Domains for Non-Covalent Surface PEGylation.

Reconstructing functional sequence motifs of proteins, using statistical copolymers greatly reduces the information content, but simplifies synthesis significantly. Key amino acid residues involved in the adhesion of mussel foot proteins are identified. The side-chain functionalities of Dopa, lysine, and arginine are abstracted and incorporated into acrylate monomers to allow controlled radical polymerization. The resulting Dopa-acrylate (Y*-acr), arginine-acrylate (R-acr), and lysine-acrylate (K-acr) monomers are polymerized in different monomer ratios and compositions by reversible addition fragmentation transfer polymerization with a poly(ethylene glycol) (PEG) macrochain transfer agent. This results in two sets of PEG-block-copolymers with statistical mixtures and different monomer ratios of catechol/primary amine and catechol/guanidine side-chain functionalities, both important pairs for mimicking π-cation interactions. The coating behavior of these PEG-block-copolymers is evaluated using quartz crystal microbalance with dissipation energy monitoring (QCM-D), leading to non-covalent PEGylation of the substrates with clear compositional optima in the coating stability and antifouling properties. The coatings prevent non-reversible albumin or serum adsorption, as well as reduce cellular adhesion and fungal spore attachment.

Toward Activatable Collagen Mimics: Combining DEPSI "Switch" Defects and Template-Guided Self-Organization to Control Collagen Mimetic Peptides.

Collagen mimetic peptides (CMPs), which imitate various structural or functional features of natural collagen, constitute advanced models illuminating the folding aspects of the collagen triple helix (CTH) motif. In this study, the CMPs of repeating Gly-Pro-Pro (GPP) triplets are tethered to an organic scaffold based on a tris(2-aminoethyl) amine (TREN) derivative (TREN(sucOH)3 ). These three templated peptide strands are further expanded via native chemical ligation to increase the number of GPP triplets and lead to a TREN(sucGPPGPPG(Ψ)SPGPPCPP[GPP]4 )3 construct. The incorporation of an ester switch segment, G(Ψ)S, as a positional O-acyl isopeptide (DEPSI) defect into the peptide strands allows the pH-controlled acceleration of CTH formation. The strand assembly process is monitored by circular dichroism (CD) spectroscopy. The results of pH jump experiments and thermal denaturation studies provide new insights into the contributions of structural DEPSI defects to the template-guided self-assembly of the CTH motif. While the organic scaffold drives the CTH formation, the switch defects act as temporary opponents and slow down the folding. CD spectroscopy data confirm that the switch defects contribute to the formation of a more stable CTH motif by enhancing the structural dynamics at the early stage of the folding process.

Implementing Zn2+ ion and pH-value control into artificial mussel glue proteins by abstracting a His-rich domain from preCollagen.

A His-rich domain of preCollagen-D found in byssal threads is derivatized with Cys and Dopa flanks to allow for mussel-inspired polymerization. Artificial mussel glue proteins are accessed that combine cysteinyldopa for adhesion with sequences for pH or Zn2+ induced ß-sheet formation. The artificial constructs show strong adsorption to Al2O3, the resulting coatings tolerate hypersaline conditions and cohesion is improved by activating the ß-sheet formation, that enhances E-modulus up to 60%.

Accessing the Next Generation of Synthetic Mussel-Glue Polymers via Mussel-Inspired Polymerization.

The formation of cysteinyldopa as biogenic connectivity in proteins is used to inspire a chemical pathway toward mussel-adhesive mimics. The mussel-inspired polymerization (MIPoly) exploits the chemically diverse family of bisphenol monomers that is oxidizable with 2-iodoxybenzoic acid to give bisquinones. Those react at room temperature with dithiols in Michael-type polyadditions, which leads to polymers with thiol-catechol connectivities (TCC). A set of TCC polymers proved adhesive behavior even on challenging poly(propylene) substrates, where they compete with commercial epoxy resins in dry adhesive strength. MIPoly promises facile scale up and exhibits high modularity to tailor adhesives, as proven on a small library where one candidate showed wet adhesion on aluminum substrates in both water and sea water models.

Information-Based Design of Polymeric Drug Formulation Additives.

Tailor-made copolymers are designed based on a peptide-poly(ethylene glycol) (QFFLFFQ-PEG) conjugate as a blueprint, to solubilize the photosensitizer meta-tetra(hydroxyphenyl)chlorin (m-THPC). The relevant functionalities of the parent peptide-PEG are mimicked by employing monomer pairs that copolymerize in a strictly alternating manner. While styrene (S) or 4-vinylbenzyl-phthalimide (VBP) provide aromatic moieties like Phe, the aliphatic isobutyl side chain of Leu4 is mimicked by maleic anhydride (MA) that reacts after polymerization with isobutylamine to give the isobutylamide-carboxyl functional unit (iBuMA). A set of copolymer-PEG solubilizers is synthesized by controlled radical polymerization, systematically altering the length of the functional segment (DPn = 2, 4, 6) and the side chain functionalization (iBuMA, iPrMA, MeMA). The m-THPC hosting and release properties of P[S-alt-iBuMA]6-PEG reached higher payload capacities and more favored release rates than the parent peptide-PEG conjugate. Interestingly, P[S-alt-RMA]n-PEG mimics the sensitivity of the peptide-PEG solubilizer well, where the exchange of Leu4 residue by Val and Ala significantly reduces the drug loading by 92%. A similar trend is found with P[S-alt-RMA]n-PEG as the exchange of iBu → iPr → Me reduces the payload capacity up to 78%.

Elution of Monomers from an Infiltrant Compared with Different Resin-Based Dental Materials.

PURPOSE: Low-molecular weight residuals eluting from dental materials may contribute to local and systemic adverse effects. Therefore, the aim of the present study was to compare triethylene glycol dimethacrylate (TEGDMA)-based commercial infiltrant with different conventional resin-based materials regarding their release of monomers. MATERIALS AND METHODS: Cylindrical blocks (n = 10) of either two sealants (Helioseal, Delton FS+), a composite (EcuSphere), an adhesive (Teco) and an infiltrant (Icon) were prepared. Additionally, 20 artificial lesions (depths ≥100 µm) were created in bovine enamel and after etching with phosphoric acid infiltrated with the infiltrant. Except for 10 infiltrated lesions, all other specimens were polished. Each specimen was stored in 1 ml distilled water (elution medium) for 240 h. The medium was renewed in logarithmical divided time periods (4.5 min-76 h). RESULTS: Total concentrations of eluted monomers within 240 h from the cylindrical specimens were 0.04-0.09 mg/ml (p >0.05; Mann-Whitney test). Unpolished infiltrated specimens showed significantly higher monomer concentrations compared to all other groups, whereas polishing of specimens resulted in significantly lower concentrations (p <0.05; Mann-Whitney test). CONCLUSION: It can be concluded that release of monomers was low in general, but for infiltrated lesions it was considerably reduced by surface polishing reaching similar values as for commonly used monomer-containing dental materials. Thus, adverse effects by the use of an infiltrant are not expected, but polishing of the infiltrated area should be considered.

Toward Artificial Mussel-Glue Proteins: Differentiating Sequence Modules for Adhesion and Switchable Cohesion.

Artificial mussel-glue proteins with pH-triggered cohesion control were synthesized by extending the tyrosinase activated polymerization of peptides to sequences with specific modules for cohesion control. The high propensity of these sequence sections to adopt ß-sheets is suppressed by switch defects. This allows enzymatic activation and polymerization to proceed undisturbed. The ß-sheet formation is regained after polymerization by changing the pH from 5.5 to 6.8, thereby triggering O→N acyl transfer rearrangements that activate the cohesion mechanism. The resulting artificial mussel glue proteins exhibit rapid adsorption on alumina surfaces. The coatings resist harsh hypersaline conditions, and reach remarkable adhesive energies of 2.64 mJ m-2 on silica at pH 6.8. In in situ switch experiments, the minor pH change increases the adhesive properties of a coating by 300 % and nanoindentation confirms the cohesion mechanism to improve bulk stiffness by around 200 %.

Combining Phage Display and Next-Generation Sequencing for Materials Sciences: A Case Study on Probing Polypropylene Surfaces.

Phage display biopanning with Illumina next-generation sequencing (NGS) is applied to reveal insights into peptide-based adhesion domains for polypropylene (PP). One biopanning round followed by NGS selects robust PP-binding peptides that are not evident by Sanger sequencing. NGS provides a significant statistical base that enables motif analysis, statistics on positional residue depletion/enrichment, and data analysis to suppress false-positive sequences from amplification bias. The selected sequences are employed as water-based primers for PP-metal adhesion to condition PP surfaces and increase adhesive strength by 100% relative to nonprimed PP.

Peptide-Assisted Design of Peptoid Sequences: One Small Step in Structure and Distinct Leaps in Functions.

Using peptide sequences for the design of functional peptoids is demonstrated for a peptide-based formulation additive that was specifically tailored to solubilize the photosensitizer meta-tetra(hydroxyphenyl)-chlorin. A set of peptoid-block-poly(ethylene glycol) solubilizers with systematic sequence variations are synthesized to reveal contributions of side-chain sequence and backbone functionalities on drug hosting and release properties. The drug payload sensitively depends on the side-chain patterns, and the best performing peptoid sequence reaches 3-times higher capacity than the corresponding peptide. The peptoid backbone not only acts as a neutral scaffold but also impacts the drug release kinetics compared to the analogues peptide, by reducing the capability to assist drug transfer to blood plasma protein models.

Mussel-Inspired Polymerization of Peptides: The Chemical Activation Route as Key to Broaden the Sequential Space of Artificial Mussel-Glue Proteins.

A previously introduced tyrosinase-activated polymerization of Tyr- and Cys-bearing peptides yielding artificial mussel-glue proteins is realized without the need of the specific enzyme by a chemical activation route. This decouples the sequence of polymerizable peptides (unimers) from the constraints of tyrosinase substrates and enables the polymerization of minimal motifs such as Dopa-Lys-Cys (Umini *KC ) or Dopa-Gly-Cys (Umini *GC ). In the polymerization procedure, sodium periodate is used to oxidize Dopa residues of the unimers to Dopa-quinones to which the thiol of a Cys residue is added in a Michael-type reaction. The resulting polyUmini *KC and polyUmini *GC exhibit a thiol-catechol connectivity as a potent adhesive functionality at each repeat unit. QCM-D experiments show the excellent substrate adsorption properties of the products from the chemically activated polymerization. On aluminum oxide surfaces, polyUmini *KC rapidly forms a coating, even under seawater model conditions and the coating resists rinsing with hypersaline solution of 4.2 M salt mixtures. While the sodium periodate oxidation is less specific than the tyrosinase reaction and requires the implementation of Dopa instead of Tyr residues into the polymerizable unimers, the chemical route makes scale-up more easily accessible.

Peptide-Assisted Design of Precision Polymer Sequences: On the Relevance of the Side-Chain Sequences and the Variability of the Backbone.

Functional sequences of monodisperse, sequence-defined oligo(amide-urethane)s are designed based on a peptide sequence as blueprint. The translation of a discrete side-chain functionality sequence from a known peptide-based solubilizer of the photosensitizer meta-tetra(hydroxyphenyl)-chlorin, into a non-peptidic precision polymer backbone is demonstrated. The resulting peptidomimetic precision polymers retain the functions of the parent peptide sequence, showing analogues sensitivity toward single monomer mutations/exchanges and even exceeding the parent peptide equivalent by reaching up to 69% higher payload capacities and more favored release kinetics.

Efficient Screening of Combinatorial Peptide Libraries by Spatially Ordered Beads Immobilized on Conventional Glass Slides.

Screening of one-bead-one-compound (OBOC) libraries is a proven procedure for the identification of protein-binding ligands. The demand for binders with high affinity and specificity towards various targets has surged in the biomedical and pharmaceutical field in recent years. The traditional peptide screening involves tedious steps such as affinity selection, bead picking, sequencing, and characterization. Herein, we present a high-throughput "all-on-one chip" system to avoid slow and technically complex bead picking steps. On a traditional glass slide provided with an electrically conductive tape, beads of a combinatorial peptide library are aligned and immobilized by application of a precision sieve. Subsequently, the chip is incubated with a fluorophore-labeled target protein. In a fluorescence scan followed by matrix-assisted laser desorption/ionization (MALDI)-time of flight (TOF) mass spectrometry, high-affinity binders are directly and unambiguously sequenced with high accuracy without picking of the positive beads. The use of an optimized ladder sequencing approach improved the accuracy of the de-novo sequencing step to nearly 100%. The new technique was validated by employing a FLAG-based model system, identifying new peptide binders for the monoclonal M2 anti-FLAG antibody, and was finally utilized to search for IgG-binding peptides. In the present format, more than 30,000 beads can be screened on one slide.

Learning from Peptides to Access Functional Precision Polymer Sequences.

Functional precision polymers based on monodisperse oligo(N-substituted acrylamide)s and oligo(2-substituted-α-hydroxy acid)s have been synthesized. The discrete sequences originate from a direct translation of side-chain functionality sequences of a peptide with well-studied properties. The peptide was previously selected to solubilize the photosensitizer meta-tetra(hydroxyphenyl)chlorin. The resulting peptidomimetic formulation additives preserve the drug solubilization and release characteristics of the parent peptide. In some cases, superior properties are obtained, reaching up to 40 % higher payloads and 27-times faster initial drug release.

Tuning mechanical reinforcement and bioactivity of 3D printed ternary nanocomposites by interfacial peptide-polymer conjugates.

We present a study on ternary nanocomposites consisting of medical grade poly(ε-caprolactone) (mPCL) matrix, hydroxyapatite nanopowder (nHA) and compatibilized magnesium fluoride nanoparticle (cMgF2) fillers. MgF2 nanoparticles were compatibilized by following a design approach based on the material interfaces of natural bone. MgF2-specific peptide-poly(ethylene glycol) conjugates were synthesized and used as surface modifiers for MgF2 nanoparticles similarly to the non-collagenous proteins (NPC) of bone which compatibilize hydroxyapatite nanocrystallites. Different compositions of mPCL/nHA/cMgF2 composites were blended together and processed into three dimensional (3D) scaffolds using solvent-free techniques including cryomilling and melt extrusion-based additive manufacturing. The use of two different inorganic fillers in mPCL resulted in nanocomposite materials with enhanced mechanical and biological properties. In particular, cMgF2 nanoparticles were found to be the primary constitent leading to the significant improvements in the mechanical properties of these composites. The scaffolds of the ternary nanocomposites provided the best in vitro performance in terms of osteogenic differentiation and stimulated mineralization. In summary, we demonstrated that the concept of bioinspired interface engineering facilitates the development of homogeneous ternary nanocomposites with increased processability in additive biomanufacturing. Additionally, the concept leads to scaffolds exhibiting enhanced mechanical and biological properties. Overall, these multicomponent nano-interfaced building blocks add a new group of advanced functional materials with tunable mechanical properties, degradation and bioactivity.

Fish and Clips: A Convenient Strategy to Identify Tyrosinase Substrates with Rapid Activation Behavior for Materials Science Applications.

Peptides with suitable substrate properties for a specific tyrosinase are selected by combinatorial means from a one-bead-one-compound (OBOC) peptide library. The identified sequences exhibit tyrosine residues that are rapidly oxidized to 3,4-dihydroxyphenylalanine (Dopa), making the peptides interesting for enzyme-activated adhesives. The selection process of peptides involves tyrosinase oxidation of tyrosine-bearing sequences on a solid support, yielding dopaquinone residues (fish from the sequence pool), to which thiol-functional fluorescent probes attach by Michael-reaction (clip to mark). Labeled supports are isolated and sequence readout is feasible by MALDI-TOF-MS/MS to reveal peptides, while activation kinetics as well as enzyme-activated coating behavior are verifying the proper selection.

Specific Decoration of a Discrete Bismuth Oxido Cluster by Selected Peptides towards the Design of Metal Tags.

Metal tags find application in a multitude of biomedical systems and the combination with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) offers an opportunity for multiplexing. To lay the foundation for an increase of the signal intensities in such processes, we herein present a general approach for efficient functionalization of a well-defined metal oxido cluster [Bi6 O4 (OH)4 (SO3 CF3 )6 (CH3 CN)6 ]⋅2 CH3 CN (1), which can be realized by selecting 7mer peptide sequences via combinatorial means from large one-bead one-compound peptide libraries. Selective cluster-binding peptide sequences (CBS) for 1 were discriminated from non-binders by treatment with H2 S gas to form the reduction product Bi2 S3 , clearly visible to the naked eye. Interactions were further confirmed by NMR experiments. Extension of a binding peptide with a maleimide linker (Mal) introduces the possibility to covalently attach thiol-bearing moieties such as biological probes and for their analysis the presence of the cluster instead of mononuclear entities should lead to an increase of signal intensities in LA-ICP-MS measurements. To prove this, CBS-Mal was covalently bound onto thiol-presenting glass substrates, which then captured 1 effectively, so that LA-ICP-MS measurements demonstrated drastic signal amplification compared to single lanthanide tags.

Expanding the Material Space of Biosustainable Poly(sophorolipids) by Modular Functionalization.

A general strategy to modify the structurally interesting poly(lactonic sophorolipid) (Poly(LSL)), a polymer derived from the biobased sophorolipid monomer, is presented. Effective backbone modification is achieved via a triazolinedione (TAD)-ene-reaction. This enables the straightforward introduction of various functionalities to the double bond in the fatty acid segment of the Poly(LSL). The reaction occurs quantitatively in stoichiometric ratios up to a targeted functionalization degree of 50% and complete functionalization of all double bonds is feasible when three equivalents excess of the TAD moiety with respect to the double bonds are used. It is shown that the thermal and mechanical properties of the modified polymers can be tailored via type and degree of functionalization. The exploited TAD ligation fulfills the criteria of an economic and efficient reaction, making the presented modification strategy straightforward to fine-tune the material properties and extending the applicability of Poly(LSL) as a material.

Digging into the Sequential Space of Thiolactone Precision Polymers: A Combinatorial Strategy to Identify Functional Domains.

Functional sequences of precision polymers based on thiolactone/Michael chemistry are identified from a large one-bead one-compound library. Single-bead readout by MALDI-TOF MS/MS identifies sequences that host m-THPC that is a second generation photo-sensitizer drug. The corresponding Tla/Michael-PEG conjugates make m-THPC available in solution and drug payload as well as drug release kinetics can be fine-tuned by the precision segment.