Anatomy of the occipital lobe using lateral and posterior approaches: a neuroanatomical study with a neurosurgical perspective on intraoperative brain mapping.

BACKGROUND: A major concern of occipital lobe surgery is the risk of visual field deficits. Extending anatomical occipital lobectomy to the functional requires awake conditions because the anterior resection border comprises language-, motor- and visuospatial function-related areas within the temporal and parietal lobes. This study investigated the lateral and posterior perspectives of the occipital lobe anatomy when approaching intraaxial occipital lobe lesions. MATERIALS AND METHODS: Ten adult cadaveric cerebral hemispheres were dissected after being prepared following the concept described by Klingler for the first time. RESULTS: The occipital lobe was located posteriorly to the parietotemporal line. Within the occipital lobe, the occipital horn of the lateral ventricle represented the only anatomical landmark. Laterally, optic radiation was identified as a part of the sagittal stratum. None of the intraoperatively identifiable tracts was found medial to the occipital horn. Language- and motor-related areas were identified anteriorly and should be actively identified when lobectomy based on function is planned. Subcortically, from a posterior perspective, the anterolateral border constituted the arcuate fascicle/superior longitudinal fascicle complex and was anteromedial to the thalamocortical tract. Remaining posterior to the line connecting the preoccipital notch with the superior Rolandic point avoided the cortical and white matter tracts related to language, motor and visuospatial function. CONCLUSIONS: Knowledge of occipital lobe anatomy and surrounding structures is essential to preoperatively assess the risk of the procedure and proper consultation of a patient in terms of the extent of resection, primarily concerning visual field deficits.

Capturing Wheat Phenotypes at the Genome Level.

Recent technological advances in next-generation sequencing (NGS) technologies have dramatically reduced the cost of DNA sequencing, allowing species with large and complex genomes to be sequenced. Although bread wheat (Triticum aestivum L.) is one of the world's most important food crops, efficient exploitation of molecular marker-assisted breeding approaches has lagged behind that achieved in other crop species, due to its large polyploid genome. However, an international public-private effort spanning 9 years reported over 65% draft genome of bread wheat in 2014, and finally, after more than a decade culminated in the release of a gold-standard, fully annotated reference wheat-genome assembly in 2018. Shortly thereafter, in 2020, the genome of assemblies of additional 15 global wheat accessions was released. As a result, wheat has now entered into the pan-genomic era, where basic resources can be efficiently exploited. Wheat genotyping with a few hundred markers has been replaced by genotyping arrays, capable of characterizing hundreds of wheat lines, using thousands of markers, providing fast, relatively inexpensive, and reliable data for exploitation in wheat breeding. These advances have opened up new opportunities for marker-assisted selection (MAS) and genomic selection (GS) in wheat. Herein, we review the advances and perspectives in wheat genetics and genomics, with a focus on key traits, including grain yield, yield-related traits, end-use quality, and resistance to biotic and abiotic stresses. We also focus on reported candidate genes cloned and linked to traits of interest. Furthermore, we report on the improvement in the aforementioned quantitative traits, through the use of (i) clustered regularly interspaced short-palindromic repeats/CRISPR-associated protein 9 (CRISPR/Cas9)-mediated gene-editing and (ii) positional cloning methods, and of genomic selection. Finally, we examine the utilization of genomics for the next-generation wheat breeding, providing a practical example of using in silico bioinformatics tools that are based on the wheat reference-genome sequence.

Food waste management during the COVID-19 outbreak: a holistic climate, economic and nutritional approach.

Improving the food supply chain efficiency has been identified as an essential means to enhance food security, while reducing pressure on natural resources. Adequate food loss and waste (FLW) management has been proposed as an approach to meet these objectives. The main hypothesis of this study is to consider that the "strong fluctuations and short-term changes" on eating habits may have major consequences on potential FLW generation and management, as well as on GHG emissions, all taking into account the nutritional and the economic cost. Due to the exceptional lockdown measures imposed by the Spanish government, as a consequence of the emerging coronavirus disease, COVID-19, food production and consumption systems have undergone significant changes, which must be properly studied in order to propose strategies from the lessons learned. Taking Spain as a case study, the methodological approach included a deep analysis of the inputs and outputs of the Spanish food basket, the supply chain by means of a Material Flow Analysis, as well as an economic and comprehensive nutritional assessment, all under a life cycle thinking approach. The results reveal that during the first weeks of the COVID-19 lockdown, there was no significant adjustment in overall FLW generation, but a partial reallocation from extra-domestic consumption to households occurred (12% increase in household FLW). Moreover, the economic impact (+11%), GHG emissions (+10%), and the nutritional content (-8%) complete the multivariable impact profile that the COVID-19 outbreak had on FLW generation and management. Accordingly, this study once again highlights that measures aimed at reducing FLW, particularly in the household sector, are critical to make better use of food surpluses and FLW prevention and control, allowing us to confront future unforeseen scenarios.

Environmental impact assessment of the implementation of a Deposit-Refund System for packaging waste in Spain: A solution or an additional problem?

Food and beverage packaging represent a relevant fraction of municipal solid waste, and its adequate management is critical. Selective waste collection by an authorized organization according to an Extended Producer Responsibility System (EPRS) is the current option implemented in Spain for packaging. Other European countries have selected an alternative or a complement: a Deposit-Refund System (DRS) for certain type of beverage packaging. The selection of an EPRS or a DRS is a complex task and this work developed a universal methodology for the evaluation of optimal waste packaging management systems, focused on food and beverage. Life Cycle Assessment (LCA) approach was applied to compare the current EPRS vs the implementation of a new system, with the coexistence of a DRS and a reduced EPRS. Although the environmental savings of the new system are superior to its impacts, even if the DRS would reach a value of 90% for the package return index, the current EPRS obtains significantly better environmental results. All impact categories are favorable to the current EPRS, except ADP, where the potentially higher DRS recycling rate is manifested. The impact associated to the flow of specific DRS packages in the new system is clearly higher than that linked to the flow of DRS excluded packages and it is even higher that the impact of the total joint flow in the current EPRS for all categories except ADP. The fundamental cause of this high impact is the backhauling stage to transport the recovered packages to the counting plants without compacting. A sensitivity analysis confirmed the robustness of the preference of the current EPRS over the combination of a DRS and a reduced EPRS. The developed approach supposes a methodological advance that can be extended to previously realized studies about the implementation of waste management systems in other contexts.

Environmental assessment of the food packaging waste management system in Spain: Understanding the present to improve the future.

One-way packaging can represent up to half the environmental impacts of the food value chain and thus optimising its management is essential. Collective selective waste collection managed by authorised organisations (Extended Producer Responsibility, EPR), with or without Deposit-Refund Systems (DRS) are alternatives implemented at European level to handle this problem. Since there is no single simple formula that can be applied to every waste management system, this case study is focused on the entire Spanish model of one-way food packaging waste management, from collection of each fraction in specific containers to final treatment, considering eight different materials. For the analysis, six different impact categories were considered: abiotic depletion potential, global warming potential, acidification potential, eutrophication potential, ozone depletion potential and photochemical ozone formation. Results reveal that the recycling stage is the main stage contributing to the environmental impacts, but the environmental savings related to the recovery of materials in this stage compensates these loads and the system must be considered advantageous for the environment. By contrast, sorting plants present the lowest contributions and is the least significant stage. Significant environmental improvements (close to 10%) would be achieved by addressing the total bulk collection flow to mechanical-biological treatment and increasing the selective collection of light and glass packaging waste. This study can serve to identify common drivers that contribute significantly to the development of an integrated approach to waste packaging management and as baseline for comparison studies with alternative waste recovery technologies and systems.

Airplane cabin waste characterization: Knowing the waste for sustainable management and future recommendations.

The aviation industry generates a significant amount of comingle waste. Nowadays, companies are making efforts to enhance waste management and reduce waste generation. In order to improve present practices and implement a proper waste management system, the quantities, materials, and typology of waste generated need to be studied. A total of 145 airplanes were analysed. We differentiated 5 strips of duration and identified 4 different generation sources within the cabin associated to the business and tourist passenger classes. We classified and characterized the waste into 20 different materials. Results provide a detailed, representative and adapted study of the catering waste generated in the aviation industry. The characterization, which allows distinguishing between manipulated and unmanipulated materials, aims at providing useful information to reduce the generation of waste. The analysis performed in the present study shows that the flying distance increases the waste generation, as more food is served. It also shows that organic matter, paper/cardboard and packaging are the dominant materials in the waste generated in flights. The results of the characterizations obtained allow making some recommendations. The use of bi-compartmentalized waste trolleys to separate on-board recyclable materials from the rest is desirable to obtain a clean recoverable waste stream. Supressing unpopular food from menus, identified analysing the leftovers, could also reduce the amount of waste generated. (This characterization study is part of the European project LIFE + Zero Cabin Waste.). Changes in the CE 1069/2009 regulation would allow more waste to be recycled instead of landfilled. Ultimately, the information obtained from this study will be used to design a more sustainable waste management system.

Radiographic estimation of the growth rate of initially underdiagnosed ameloblastomas.

BACKGROUND: To evaluate the specific growth rate (SGR) of ameloblastoma. MATERIAL AND METHODS: cases of ameloblastoma initially underdiagnosed (e.g. cases overlooked or diagnosed as reactive lesions) which had adequate radiographic documentation to evaluate their progression were retrospectively selected. Two panoramic radiographs were analyzed to determine the specific growth rate (SGR) of each tumor, defined as the logarithm of the ratio of final tumor area (when the diagnosis of ameloblastoma was made) to the initial tumor area (when the lesion was underdiagnosed), divided by the time interval between the radiographic images. The tumor area was measured using the software ImageJ. RESULTS: Twelve patients with mandibular ameloblastomas were selected, including 5 males and 7 females, with a mean age of 24.9 years (range: 14-61 years). In four cases, the lesion was associated with the crown of an impacted third molar. In three cases, it was initially diagnosed as a periapical lesion. Three cases were extrafollicular and were not noticed in the initial radiographs. Two cases were initially diagnosed as ameloblastoma, but the surgery was delayed for personal reasons. The mean interval of time between the two radiographic images was 4.3 years (range: 0.4-9 years). Based on our analysis, ameloblastoma grows in average 40.4% per year (range: 14.9-88.7%). CONCLUSIONS: Ameloblastoma is a progressively growing tumor, but its growth rate seems to be smaller than initially reported in the literature. Better understanding the radiographic progression of ameloblastoma might improve its early diagnosis, management, and prognosis.

Use of traditional medicines among pharmacists in Nigeria.

BACKGROUND: Traditional Medicine (TM) use is growing and emerging as an issue of public healthcare importance. Recently, there are increasing interest and trends of TM use among health care professionals (HCP). However, information regarding TM use among pharmacists in Nigeria is limited. This study investigates the use of TM among pharmacists in Nigeria. MATERIALS AND METHODS: This study was a cross sectional study in the form of an online survey (Google Surveys). Eligible participants were pharmacists currently practicing in Nigeria. The closed-ended questionnaire was developed and validated prior to the data collection. The hyperlink to the online survey questionnaire was shared with the eligible pharmacists via social media groups belonging to pharmacists' professional associations. RESULTS: A total of 262 of completed responses were received. Among the respondents, 53.2% had over 5 years of pharmacy practice experience and 48% were practicing in hospitals. 225 respondents (85.9%) have ever used TM at least once in their lifetime, while 21.3% were currently using TM at the time of the data collection. Those that used TM in the last 12 months were 47.0%, while those that used it within the last week, one month and six months were 15.4%, 10.5% and. 12.8% respectively. Herbal medicine was the most frequently used TM among the respondents (94.2%). The most common reason for using TM was for the maintenance of general well-being (38.2%). Among the TM users, 17.3% have reported experiencing an ADE-related to the TM use. Among the respondents, 44.7% felt TM is safe for use while 35.5% indicated that they will recommend TM to their patients. CONCLUSION: TM is commonly used by a pharmacist in Nigeria particularly among those practicing in the community and hospital. This signifies an increasing acceptance of TM among healthcare professionals and a call for more education and training on TM for effective pharmaceutical care delivery.

Combined application of Life Cycle Assessment and linear programming to evaluate food waste-to-food strategies: Seeking for answers in the nexus approach.

The great concern regarding food loss (FL) has been studied previously, but in an isolated way, disregarding interdependencies with other areas. This paper aims to go a step further by proposing a new procedure to assess different waste management alternatives based on the nexus approach by means of an integrated Water-Energy-Food-Climate Nexus Index (WEFCNI). The environmental profile of the waste management techniques is determined using Life Cycle Assessment (LCA) which, in combination with Linear Programming (LP), explores the optimal aggregation of weighting factors that lead to an aggregated nexus index. The management of residues from the anchovy canning industry in Cantabria (Spain) has been used as a case study, considering the three current applied alternatives: (i) valorisation of FL as animal feed in aquaculture (food waste-to-food approach), (ii) incineration of FL with energy recovery, and (iii) landfilling with biogas recovery. The last two considered the use of energy recovered to produce a new aquaculture product (food waste-to-energy-to-food scenarios). The results indicate that incineration is the best performing scenario when the nutritional energy provided by the valorisation alternative is not high enough and the valorisation technology presents the highest water consumption. Therefore, a minimisation in the consumption of natural resources is suggested in order to improve the application of circular economy within the sector. The use of the nexus index as an environmental management tool is extendable to any food system with the aim of facilitating the decision-making process in the development of more sustainable products.

Implementation of standardized patient program using local resources in Avalon School of Medicine.

INTRODUCTION: The standardized Patient Program (SPP) is a standard educational training method which provides the pre-clinical students a better clinical foundation by linking the realm of clinical medicine to basic sciences. It incorporates a modern simulation technique and enhances the ability of the students wherein they can practice, apply and learn the basics of patient encounter. The main objective of this study was to analyze the implementation and efficiency of the SPP in Avalon University School of Medicine (AUSOM). METHODS: A quasi-experimental "before-and-after" study design was conducted among the 3rd Semester (MD3) medical students at AUSOM. 24 students voluntarily participated in the study. The effectiveness of the program was evaluated after comparing the summative examination scores before and after implementation of the SPP (graded in 100 points system). Mean scores were calculated and a comparison of the change in scores was made, using a paired t-test in Stata (ÓStata corp). RESULTS: The mean final summative clinical skills examination scores of the students before and after the introduction of the SPP were 78.46 ± 6.62 (SEM: 1.35, range: 89-70) and 86.54±6.41 (SEM: 1.31, range: 98-65), respectively. There was a statistically significant increment (t=5.5058, p=0.0001) in the scores of the students after the introduction of the SPP. CONCLUSION: Introduction and implementation of SPP at AUSOM at preclinical years increased the overall students' performance in clinical skills. It is necessary that medical schools implement SPP early in preclinical years to strengthen learning and inoculate necessary clinical skills in medical students.

Metal-on-metal total hip arthroplasty is not associated with cardiac disease.

AIMS: Many case reports and small studies have suggested that cobalt ions are a potential cause of cardiac complications, specifically cardiomyopathy, after metal-on-metal (MoM) total hip arthroplasty (THA). The impact of metal ions on the incidence of cardiac disease after MoM THA has not been evaluated in large studies. The aim of this study was to compare the rate of onset of new cardiac symptoms in patients who have undergone MoM THA with those who have undergone metal-on-polyethylene (MoP) THA. PATIENTS AND METHODS: Data were extracted from the Standard Analytics Files database for patients who underwent MoM THA between 2005 and 2012. Bearing surface was selected using International Classification of Diseases ninth revision codes. Patients with a minimum five-year follow-up were selected. An age and gender-matched cohort of patients who underwent MoP THA served as a comparison group. New diagnoses of cardiac disease were collected during the follow-up period. Comorbidities and demographics were identified and routine descriptive statistics were used. RESULTS: We identified 29 483 patients who underwent MoM THA and 24 175 matched patients who underwent MoP THA. Both groups had a mean Charlson comorbidity index score of 4. There were no statistically significant differences in 30 of 31 pre-existing comorbidities. Patients undergoing MoM THA had a slightly lower incidence of cardiac failure compared with those undergoing MoP THA at three years (6.60% versus 7.06%, odds ratio (OR) 0.93, 95% confidence interval (CI) 0.87 to 0.99) and four years (8.73% versus 9.49%, OR 0.91, 95% CI 0.86 to 0.97) postoperatively, with no difference in the incidence of new cardiac failure in between the groups at five years. There was no statistically significant difference in the incidence of arrhythmia, myocardial infarction and cardiomyopathy at any time between the two groups. CONCLUSION: MoM THA is not associated with cardiac complications. Initial reports may have represented individual instances of cardiac disease in patients with a failing MoM articulation rather than an emerging epidemiological trend. Cite this article: Bone Joint J 2018;100-B:28-32.

Tagging fast neutrons from a 252Cf fission-fragment source.

Coincidence and time-of-flight measurement techniques are employed to tag fission neutrons emitted from a 252Cf source sealed on one side with a very thin layer of Au. The source is positioned within a gaseous 4He scintillator detector. Together with α particles, both light and heavy fission fragments pass through the thin layer of Au and are detected. The fragments enable the corresponding fission neutrons, which are detected in a NE-213 liquid-scintillator detector, to be tagged. The resulting continuous polychromatic beam of tagged neutrons has an energy dependence that agrees qualitatively with expectations. We anticipate that this technique will provide a cost-effective means for the characterization of neutron-detector efficiency in the energy range 1-6MeV.

Waste management under a life cycle approach as a tool for a circular economy in the canned anchovy industry.

The anchovy canning industry has high importance in the Cantabria Region (North Spain) from economic, social and touristic points of view. The Cantabrian canned anchovy is world-renowned owing to its handmade and traditional manufacture. The canning process generates huge amounts of several food wastes, whose suitable management can contribute to benefits for both the environment and the economy, closing the loop of the product life cycle. Life cycle assessment methodology was used in this work to assess the environmental performance of two waste management alternatives: Head and spine valorisation to produce fishmeal and fish oil; and anchovy meat valorisation to produce anchovy paste. Fuel oil production has been a hotspot of the valorisation of heads and spines, so several improvements should be applied. With respect to anchovy meat valorisation, the production of polypropylene and glass for packaging was the least environmentally friendly aspect of the process. Furthermore, the environmental characterisation of anchovy waste valorisation was compared with incineration and landfilling alternatives. In both cases, the valorisation management options were the best owing to the avoided burdens associated with the processes. Therefore, it is possible to contribute to the circular economy in the Cantabrian canned anchovy industry.

Dissecting miRNAs in Wheat D Genome Progenitor, Aegilops tauschii.

As the post-transcriptional regulators of gene expression, microRNAs or miRNAs comprise an integral part of understanding how genomes function. Although miRNAs have been a major focus of recent efforts, miRNA research is still in its infancy in most plant species. Aegilops tauschii, the D genome progenitor of bread wheat, is a wild diploid grass exhibiting remarkable population diversity. Due to the direct ancestry and the diverse gene pool, A. tauschii is a promising source for bread wheat improvement. In this study, a total of 87 Aegilops miRNA families, including 51 previously unknown, were computationally identified both at the subgenomic level, using flow-sorted A. tauschii 5D chromosome, and at the whole genome level. Predictions at the genomic and subgenomic levels suggested A. tauschii 5D chromosome as rich in pre-miRNAs that are highly associated with Class II DNA transposons. In order to gain insights into miRNA evolution, putative 5D chromosome miRNAs were compared to its modern ortholog, Triticum aestivum 5D chromosome, revealing that 48 of the 58 A. tauschii 5D miRNAs were conserved in orthologous T. aestivum 5D chromosome. The expression profiles of selected miRNAs (miR167, miR5205, miR5175, miR5523) provided the first experimental evidence for miR5175, miR5205 and miR5523, and revealed differential expressional changes in response to drought in different genetic backgrounds for miR167 and miR5175. Interestingly, while miR5523 coding regions were present and expressed as pre-miR5523 in both T. aestivum and A. tauschii, the expression of mature miR5523 was observed only in A. tauschii under normal conditions, pointing out to an interference at the downstream processing of pre-miR5523 in T. aestivum. Overall, this study expands our knowledge on the miRNA catalog of A. tauschii, locating a subset specifically to the 5D chromosome, with ample functional and comparative insight which should contribute to and complement efforts to develop drought tolerant wheat varieties.

A Comprehensive Prescription for Plant miRNA Identification.

microRNAs (miRNAs) are tiny ribo-regulatory molecules involved in various essential pathways for persistence of cellular life, such as development, environmental adaptation, and stress response. In recent years, miRNAs have become a major focus in molecular biology because of their functional and diagnostic importance. This interest in miRNA research has resulted in the development of many specific software and pipelines for the identification of miRNAs and their specific targets, which is the key for the elucidation of miRNA-modulated gene expression. While the well-recognized importance of miRNAs in clinical research pushed the emergence of many useful computational identification approaches in animals, available software and pipelines are fewer for plants. Additionally, existing approaches suffers from mis-identification and annotation of plant miRNAs since the miRNA mining process for plants is highly prone to false-positives, particularly in cereals which have a highly repetitive genome. Our group developed a homology-based in silico miRNA identification approach for plants, which utilizes two Perl scripts "SUmirFind" and "SUmirFold" and since then, this method helped identify many miRNAs particularly from crop species such as Triticum or Aegliops. Herein, we describe a comprehensive updated guideline by the implementation of two new scripts, "SUmirPredictor" and "SUmirLocator," and refinements to our previous method in order to identify genuine miRNAs with increased sensitivity in consideration of miRNA identification problems in plants. Recent updates enable our method to provide more reliable and precise results in an automated fashion in addition to solutions for elimination of most false-positive predictions, miRNA naming and miRNA mis-annotation. It also provides a comprehensive view to genome/transcriptome-wide location of miRNA precursors as well as their association with transposable elements. The "SUmirPredictor" and "SUmirLocator" scripts are freely available together with a reference high-confidence plant miRNA list.

Antipyretic and antimalarial activities of Solenostemon monostachyus.

CONTEXT: Solenostemon monostachyus P. Beauv (Lamiaceae) is an important herb used traditionally in the treatment of malaria, fever, and other diseases. OBJECTIVES: Antiplasmodial and antipyretic activities of S. monostachyus aerial extract were evaluated to ascertain the folkloric claim of its antimalarial and antipyretic activities. MATERIALS AND METHODS: The extract (75-225 mg/kg) and fractions (chloroform and aqueous; 150 mg/kg) of S. monostachyus were investigated for suppressive, prophylactic, and curative antiplasmodial activities against chloroquine-sensitive Plasmodium berghei infections in Swiss albino mice and for antipyretic activity against 2,4-dinitrophenol and yeast-induced pyrexia. Artesunate (5 mg/kg) and pyrimethamine (1.2 mg/kg) were used as positive controls for antiplasmodial models. Thin films made from tail blood of each mouse were used to assess the level of parasitaemia of the mice. RESULTS: The extract/fractions progressively reduced parasitaemia induced by chloroquine sensitive P. berghei infection in prophylactic (28.48-71.72%), suppressive (12.52-72.47%), and curative (22.4-82.34%) models in mice. These reductions were statistically significant (p < 0.01-0.001). They also improved significantly (p < 0.01-0.001) the mean survival time (MST) from 12.26 to 25.63 d relative to control (11.36 d). The activities of extract/fractions were incomparable with that of the standard drugs used (artesunate and pyrimethamine). The extract exerted prominent inhibition of pyrexia on dinitrophenol (87.33-90.11%, 5 h) and yeast (56.22-65.33, 5 h) induced pyrexia. Inhibition was significant (p < 0.05-0.001) from 3 to 5 h post-administration of extract and in a dose-dependent fashion. CONCLUSION: The plant may possess antiplasmodial and antipyretic effects which may in part be mediated through the chemical constituents of the plant.

Identification of the VERNALIZATION 4 gene reveals the origin of spring growth habit in ancient wheats from South Asia.

Wheat varieties with a winter growth habit require long exposures to low temperatures (vernalization) to accelerate flowering. Natural variation in four vernalization genes regulating this requirement has favored wheat adaptation to different environments. The first three genes (VRN1-VRN3) have been cloned and characterized before. Here we show that the fourth gene, VRN-D4, originated by the insertion of a ∼290-kb region from chromosome arm 5AL into the proximal region of chromosome arm 5DS. The inserted 5AL region includes a copy of VRN-A1 that carries distinctive mutations in its coding and regulatory regions. Three lines of evidence confirmed that this gene is VRN-D4: it cosegregated with VRN-D4 in a high-density mapping population; it was expressed earlier than other VRN1 genes in the absence of vernalization; and induced mutations in this gene resulted in delayed flowering. VRN-D4 was found in most accessions of the ancient subspecies Triticum aestivum ssp. sphaerococcum from South Asia. This subspecies showed a significant reduction of genetic diversity and increased genetic differentiation in the centromeric region of chromosome 5D, suggesting that VRN-D4 likely contributed to local adaptation and was favored by positive selection. Three adjacent SNPs in a regulatory region of the VRN-D4 first intron disrupt the binding of GLYCINE-RICH RNA-BINDING PROTEIN 2 (TaGRP2), a known repressor of VRN1 expression. The same SNPs were identified in VRN-A1 alleles previously associated with reduced vernalization requirement. These alleles can be used to modulate vernalization requirements and to develop wheat varieties better adapted to different or changing environments.

Sequencing chromosome 5D of Aegilops tauschii and comparison with its allopolyploid descendant bread wheat (Triticum aestivum).

Flow cytometric sorting of individual chromosomes and chromosome-based sequencing reduces the complexity of large, repetitive Triticeae genomes. We flow-sorted chromosome 5D of Aegilops tauschii, the D genome donor of bread wheat and sequenced it by Roche 454 GS FLX platform to approximately 2.2x coverage. Repetitive sequences represent 81.09% of the survey sequences of this chromosome, and Class I retroelements are the prominent type, with a particular abundance of LTR/Gypsy superfamily. Nonrepetitive sequences were assembled to cover 17.76% of the total chromosome regions. Up to 6188 nonrepetitive gene loci were predicted to be encoded by the 5D chromosome. The numbers and chromosomal distribution patterns of tRNA genes suggest abundance in tRNA(L) (ys) and tRNA(M) (et) species, while the nonrepetitive assembly reveals tRNA(A) (la) species as the most abundant type. A comparative analysis of the genomic sequences of bread wheat and Aegilops chromosome 5D indicates conservation of gene content. Orthologous unique genes, matching Aegilops 5D sequences, numbered 3730 in barley, 5063 in Brachypodium, 4872 in sorghum and 4209 in rice. In this study, we provide a chromosome-specific view into the structure and organization of the 5D chromosome of Ae. tauschii, the D genome ancestor of bread wheat. This study contributes to our understanding of the chromosome-level evolution of the wheat genome and presents a valuable resource in wheat genomics due to the recent hybridization of Ae. tauschii genome with its tetraploid ancestor.

Measurement of the branching fraction B(Λc+ → pK-π+).

We present the first model-independent measurement of the absolute branching fraction of the Λ(c)(+) → pK(-)π(+) decay using a data sample of 978 fb(-1) collected with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. The number of Λ(c)(+) baryons is determined by reconstructing the recoiling D((*)-) pπ(+) system in events of the type e(+)e(-) → D((*)-) pπ(+)Λ(c)(+). The branching fraction is measured to be B(Λ(c)(+) → pK(-)π(+)) = (6.84 ± 0.24(-0.27)(+0.21))%, where the first and second uncertainties are statistical and systematic, respectively.

Life cycle assessment modelling of waste-to-energy incineration in Spain and Portugal.

In recent years, waste management systems have been evaluated using a life cycle assessment (LCA) approach. A main shortcoming of prior studies was the focus on a mixture of waste with different characteristics. The estimation of emissions and consumptions associated with each waste fraction in these studies presented allocation problems. Waste-to-energy (WTE) incineration is a clear example in which municipal solid waste (MSW), comprising many types of materials, is processed to produce several outputs. This paper investigates an approach to better understand incineration processes in Spain and Portugal by applying a multi-input/output allocation model. The application of this model enabled predictions of WTE inputs and outputs, including the consumption of ancillary materials and combustibles, air emissions, solid wastes, and the energy produced during the combustion of each waste fraction.