ABSTRACT
Fungal chitosan (FCH) is superior to crustacean chitosan (CH) sources and is of immense interest to the scientific community while having a high demand at the global market. Industrial scale fermentation technologies of FCH production are associated with considerable challenges that frequently restrict their economic production and feasibility. The production of high quality FCH using an underexplored fungal strain Cunninghamella echinulata NCIM 691 that is hoped to mitigate potential future large-scale production was investigated. The one-factor-at-a-time (OFAT) method was implemented to examine the effect of the medium components (i.e. carbon and nitrogen) on the FCH yield. Among these variables, the optimal condition for increased FCH yield was carbon (glucose) and nitrogen (yeast extract) source. A total of 11 factors affected FCH yield among which, the best factors were screened by Plackett-Burman design (PBD). The optimization process was carried out using the response surface methodology (RSM) via Box-Behnken design (BBD). The three-level Box- Behnken factorial design facilitated optimum values for 3 parameters-glucose (2% w/v), yeast extract (1.5% w/v) and magnesium sulphate (0.1% w/v) at 30ËC and pH of 4.5. The optimization resulted in a 2.2-fold higher FCH yield. The produced FCH was confirmed using XRD, 1H NMR, TGA and DSC techniques. The degree of deacetylation (DDA) of the extracted FCH was 88.3%. This optimization process provided a significant improvement of FCH yields and product quality for future potential scale-up processes. This research represents the first report on achieving high FCH yield using a reasonably unfamiliar fungus C. echinulata NCIM 691 through optimised submerged fermentation conditions. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-024-03919-6.
ABSTRACT
The rapid emergence of multidrug-resistant pathogens worldwide has raised concerns regarding the effectiveness of conventional antibiotics. This can be observed in ESKAPE pathogens, among others, whose multiple resistance mechanisms have led to a reduction in effective treatment options. Innovative strategies aimed at mitigating the incidence of antibiotic-resistant pathogens encompass the potential use of biosurfactants. These surface-active agents comprise a group of unique amphiphilic molecules of microbial origin that are capable of interacting with the lipidic components of microorganisms. Biosurfactant interactions with different surfaces can affect their hydrophobic properties and as a result, their ability to alter microorganisms' adhesion abilities and consequent biofilm formation. Unlike synthetic surfactants, biosurfactants present low toxicity and high biodegradability and remain stable under temperature and pH extremes, making them potentially suitable for targeted use in medical and pharmaceutical applications. This review discusses the development of biosurfactants in biomedical and therapeutic uses as antimicrobial and antibiofilm agents, in addition to considering the potential synergistic effect of biosurfactants in combination with antibiotics. Furthermore, the anti-cancer and anti-viral potential of biosurfactants in relation to COVID-19 is also discussed.
ABSTRACT
Heavy metals pollution associated with oil spills has become a major concern worldwide. It is essential to break down these contaminants in the environment. In the environment, microbes have been used to detoxify and transform hazardous components. The process can function naturally or can be enhanced by adding nutrients, electron acceptors, or other factors. This study investigates some factors affecting hydrocarbon remediation technologies/approaches. Combinations of biological, chemical, and eco-toxicological techniques are used for this process while monitoring the efficacy of bacterial products and nutrient amendments to stimulate the biotransformation of contaminated soil. Different hydrocarbon removal levels were observed with bacterial augmentation (Beta proteobacterium and Rhodococcus ruber), exhibiting a total petroleum hydrocarbon (TPH) reduction of 61%, which was further improved to a 73% reduction using bacterial augmentation combined with nutrient amendment (nitrogen, potassium, and phosphorus). A heavy metal analysis of the polluted soils showed that the combination of nutrient and bacterial augmentation resulted in a significant reduction (p-value < 0.05) in lead, zinc, and barium. Toxicity testing also showed that a reduction of up to 50% was achieved using these remediation approaches.
ABSTRACT
Biosurfactants (BSs) are microbial compounds that have emerged as potential alternatives to chemical surfactants due to their multifunctional properties, sustainability and biodegradability. Owing to their amphipathic nature and distinctive structural arrangement, biosurfactants exhibit a range of physicochemical properties, including excellent surface activity, efficient critical micelle concentration, humectant properties, foaming and cleaning abilities and the capacity to form microemulsions. Furthermore, numerous biosurfactants display additional biological characteristics, such as antibacterial, antifungal and antiviral effects, and antioxidant, anticancer and immunomodulatory activities. Over the past two decades, numerous studies have explored their potential applications, including pharmaceuticals, cosmetics, antimicrobial and antibiofilm agents, wound healing, anticancer treatments, immune system modulators and drug/gene carriers. These applications are particularly important in addressing challenges such as antimicrobial resistance and biofilm formations in clinical, hygiene and therapeutic settings. They can also serve as coating agents for surfaces, enabling antiadhesive, suppression, or eradication strategies. Not least importantly, biosurfactants have shown compatibility with various drug formulations, including nanoparticles, liposomes, micro- and nanoemulsions and hydrogels, improving drug solubility, stability and bioavailability, and enabling a targeted and controlled drug release. These qualities make biosurfactants promising candidates for the development of next-generation antimicrobial, antibiofilm, anticancer, wound-healing, immunomodulating, drug or gene delivery agents, as well as adjuvants to other antibiotics. Analysing the most recent literature, this review aims to update the present understanding, highlight emerging trends, and identify promising directions and advancements in the utilization of biosurfactants within the pharmaceutical and biomedical fields.
ABSTRACT
Nanofibers are a class of nanomaterial with specific physicochemical properties and characteristics making them quite sought after and investigated by researchers. Lipopeptide biosurfactant (LPB) formulation properties were previously established in wound healing. LPB were isolated from in vitro culture of Acinetobacter junii B6 and loaded on nanofibers formulation produced by electrospinning method with different ratios of carboxymethylcellulose (CMC), polyvinyl alcohol (PVA), and Poloxamer. Numerous experimental control tests were carried out on formulations, including physicochemical properties which were evaluated by using dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FT-IR), morphology study by scanning electron microscopy (SEM), and thermal stability. The best nanofibers formulation was obtained by the electrospinning method, with a voltage of 19.8 volts, a discharge capacity of 1cm/h, a cylindrical rotating velocity of 100rpm, and a needle interval of 7cm from the cylinder, which continued for 7hours. The formulation contained 2% (w/v) CMC, 10% (w/v) poloxamer, 9% (w/v) PVA, and 5% (w/v) LPB. This formula had desirable physicochemical properties including spreadability, stability, and uniformity with the particle size of about 590nm.
ABSTRACT
The 21st century has seen a substantial increase in the industrial applications of glycolipid biosurfactant technology. The market value of the glycolipid class of molecules, sophorolipids, was estimated to be USD 409.84 million in 2021, with that of rhamnolipid molecules projected to reach USD 2.7 billion by 2026. In the skincare industry, sophorolipid and rhamnolipid biosurfactants have demonstrated the potential to offer a natural, sustainable, and skin-compatible alternative to synthetically derived surfactant compounds. However, there are still many barriers to the wide-scale market adoption of glycolipid technology. These barriers include low product yield (particularly for rhamnolipids) and potential pathogenicity of some native glycolipid-producing microorganisms. Additionally, the use of impure preparations and/or poorly characterised congeners as well as low-throughput methodologies in the safety and bioactivity assessment of sophorolipids and rhamnolipids challenges their increased utilisation in both academic research and skincare applications. This review considers the current trend towards the utilisation of sophorolipid and rhamnolipid biosurfactants as substitutes to synthetically derived surfactant molecules in skincare applications, the challenges associated with their application, and relevant solutions proposed by the biotechnology industry. In addition, we recommend experimental techniques/methodologies, which, if employed, could contribute significantly to increasing the acceptance of glycolipid biosurfactants for use in skincare applications while maintaining consistency in biosurfactant research outputs.
Subject(s)
Biotechnology , Pulmonary Surfactants , Biotechnology/methods , Surface-Active Agents , GlycolipidsABSTRACT
Aquatic habitats are particularly susceptible to chemical pollution, such as antimicrobials, from domestic, agricultural, and industrial sources. This has led to the rapid increase of antimicrobial resistance (AMR) gene prevalence. Alternate approaches to counteract pathogenic bacteria are in development including synthetic and biological surfactants such as sodium dodecyl sulfate (SDS) and rhamnolipids. In the aquatic environment, these surfactants may be present as pollutants with the potential to affect biofilm formation and AMR gene occurrence. We tested the effects of rhamnolipid and SDS on aquatic biofilms in a freshwater stream in Northern Ireland. We grew biofilms on contaminant exposure substrates deployed within the stream over 4 weeks. We then extracted DNA and carried out shotgun sequencing using a MinION portable sequencer to determine microbial community composition, with 16S rRNA analyses (64,678 classifiable reads identified), and AMR gene occurrence (81 instances of AMR genes over 9 AMR gene classes) through a metagenomic analysis. There were no significant changes in community composition within all systems; however, biofilm exposed to rhamnolipid had a greater number of unique taxa as compared to SDS treatments and controls. AMR gene prevalence was higher in surfactant-treated biofilms, although not significant, with biofilm exposed to rhamnolipids having the highest presence of AMR genes and classes compared to the control or SDS treatments. Our results suggest that the presence of rhamnolipid encourages an increase in the prevalence of AMR genes in biofilms produced in mixed-use water bodies.
Subject(s)
Anti-Infective Agents , Surface-Active Agents , RNA, Ribosomal, 16S/genetics , Surface-Active Agents/pharmacology , Anti-Infective Agents/pharmacology , Fresh Water , BiofilmsABSTRACT
Wound healing refers to the complex process of restoring the forms and functions of damaged tissues. Multiple growth factors and released cytokines tightly regulate the wound site. Healing processes can be disrupted by any alteration that would aggravate the damage and lengthen the repair process. Some of the conditions that may impair wound healing include infections and inflammation. Surfactants are amphiphilic compounds widely used in various formulations including detergents, food, pharmaceuticals and cosmetics. Biosurfactants, therefore, are surface-active compounds produced by biological agents, particularly yeast or bacteria, and represent a safer and environmentally preferred alternative to chemical surfactants. Numerous studies have targeted surface-active molecules as wound healing agents for their anti-inflammatory, antioxidant and antibacterial potential. This review focuses on surface-active molecules used in wound healing activities and analyses their effectiveness and mechanisms of action.
Subject(s)
Inflammation , Surface-Active Agents , Humans , Surface-Active Agents/pharmacology , Surface-Active Agents/therapeutic use , Antioxidants , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/therapeutic use , Wound Healing/physiologyABSTRACT
The terms discussed in this review-biosurfactants (BSs) and bioemulsifiers (BEs)-describe surface-active molecules of microbial origin which are popular chemical entities for many industries, including food. BSs are generally low-molecular-weight compounds with the ability to reduce surface tension noticeably, whereas BEs are high-molecular-weight molecules with efficient emulsifying abilities. Some other biomolecules, such as lecithin and egg yolk, are useful as natural BEs in food products. The high toxicity and severe ecological impact of many chemical-based surfactants have directed interest towards BSs/BEs. Interest in food surfactant formulations and consumer anticipation of "green label" additives over synthetic or chemical-based surfactants have been steadily increasing. BSs have an undeniable prospective for replacing chemical surfactants with vast significance to food formulations. However, the commercialization of BSs/BEs production has often been limited by several challenges, such as the optimization of fermentation parameters, high downstream costs, and low yields, which had an immense impact on their broader adoptions in different industries, including food. The foremost restriction regarding the access of BSs/BEs is not their lack of cost-effective industrial production methods, but a reluctance regarding their potential safety, as well as the probable microbial hazards that may be associated with them. Most research on BSs/BEs in food production has been restricted to demonstrations and lacks a comprehensive assessment of safety and risk analysis, which has limited their adoption for varied food-related applications. Furthermore, regulatory agencies require extensive exploration and analysis to secure endorsements for the inclusion of BSs/BEs as potential food additives. This review emphasizes the promising properties of BSs/BEs, trailed by an overview of their current use in food formulations, as well as risk and toxicity assessment. Finally, we assess their potential challenges and upcoming future in substituting chemical-based surfactants.
Subject(s)
Food Industry , Surface-Active Agents , Prospective Studies , Surface-Active Agents/chemistry , Food AdditivesABSTRACT
Skin irritation and allergic reactions associated with the use of skincare products formulated with synthetically derived surfactants such as sodium lauryl ether sulphate (SLES) have encouraged the search for naturally derived and biocompatible alternatives. Glycolipid biosurfactants such as sophorolipids (SL) and rhamnolipids (RL) offer a potential alternative to SLES. However, most studies on the bioactive properties of microbial glycolipids were determined using their mixed congeners, resulting in significant inter-study variations. This study aims to compare the effects of highly purified SL (acidic and lactonic) and RL (mono-RL and di-RL) congeners and SLES on a spontaneously transformed human keratinocyte cell line (HaCaT cells) to assess glycolipids' safety for potential skincare applications. Preparations of acidic SL congeners were 100% pure, lactonic SL were 100% pure, mono-RL were 96% pure, and di-RL were 97% pure. Cell viability using XTT assays, cell morphological analyses, and immunoassays revealed that microbial glycolipids have differing effects on HaCaT cells dependent on chemical structure. Compared with SLES, acidic SL and mono-RL have negligible effects on cell viability, cell morphology, and production of pro-inflammatory cytokines. Furthermore, at non-inhibitory concentrations, di-RL significantly attenuated IL-8 production and CXCL8 expression while increasing IL-1RA production and IL1RN expression in lipopolysaccharide-stimulated HaCaT cells. Although further studies would be required, these results demonstrate that as potential innocuous and bioactive compounds, microbial glycolipids could provide a substitute to synthetic surfactants in skincare formulations and perform immunopharmacological roles in topical skin infections such as psoriasis. KEY POINTS: ⢠Purified glycolipid congeners have differing effects on human keratinocytes. ⢠Compared with SLES, acidic sophorolipids and mono-rhamnolipids have innocuous effects on keratinocytes. ⢠Di-rhamnolipids and mono-rhamnolipids modulate cytokine production in lipopolysaccharide stimulated human keratinocytes.
Subject(s)
Glycolipids , Lipopolysaccharides , Humans , Surface-Active Agents/metabolism , Sodium Dodecyl Sulfate/chemistry , KeratinocytesABSTRACT
Petroleum hydrocarbons and toxic metals are sources of environmental contamination and are harmful to all ecosystems. Fungi have metabolic and morphological plasticity that turn them into potential prototypes for technological development in biological remediation of these contaminants due to their ability to interact with a specific contaminant and/or produced metabolites. Although fungal bioinoculants producing enzymes, biosurfactants, polymers, pigments and organic acids have potential to be protagonists in mycoremediation of hydrocarbons and toxic metals, they can still be only adjuvants together with bacteria, microalgae, plants or animals in such processes. However, the sudden accelerated development of emerging technologies related to the use of potential fungal bioproducts such as bioinoculants, enzymes and biosurfactants in the remediation of these contaminants, has boosted fungal bioprocesses to achieve higher performance and possible real application. In this review, we explore scientific and technological advances in bioprocesses related to the production and/or application of these potential fungal bioproducts when used in remediation of hydrocarbons and toxic metals from an integral perspective of biotechnological process development. In turn, it sheds light to overcome existing technological limitations or enable new experimental designs in the remediation of these and other emerging contaminants.
Subject(s)
Petroleum , Animals , Biodegradation, Environmental , Ecosystem , Hydrocarbons , Organic ChemicalsABSTRACT
Increasing food demand by the ever-growing population imposes an extra burden on the agricultural and food industries. Chemical-based pesticides, fungicides, fertilizers, and high-breeding crop varieties are typically employed to enhance crop productivity. Overexploitation of chemicals and their persistence in the environment, however, has detrimental effects on soil, water, and air which consequently disturb the food chain and the ecosystem. The lower aqueous solubility and higher hydrophobicity of agrochemicals, pesticides, metals, and hydrocarbons allow them to adhere to soil particles and, therefore, continue in the environment. Chemical pesticides, viz., organophosphate, organochlorine, and carbamate, are used regularly to protect agriculture produce. Hydrophobic pollutants strongly adhered to soil particles can be solubilized or desorbed through the usage of biosurfactant/s (BSs) or BS-producing and pesticide-degrading microorganisms. Among different types of BSs, rhamnolipids (RL), surfactin, mannosylerythritol lipids (MELs), and sophorolipids (SL) have been explored extensively due to their broad-spectrum antimicrobial activities against several phytopathogens. Different isoforms of lipopeptide, viz., iturin, fengycin, and surfactin, have also been reported against phytopathogens. The key role of BSs in designing and developing biopesticide formulations is to protect crops and our environment. Various functional properties such as wetting, spreading, penetration ability, and retention period are improved in surfactant-based formulations. This review emphasizes the use of diverse types of BSs and their source microorganisms to challenge phytopathogens. Extensive efforts seem to be focused on discovering the innovative antimicrobial potential of BSs to combat phytopathogens. We discussed the effectiveness of BSs in solubilizing pesticides to reduce their toxicity and contamination effects in the soil environment. Thus, we have shed some light on the use of BSs as an alternative to chemical pesticides and other agrochemicals as sparse literature discusses their interactions with pesticides. Life cycle assessment (LCA) and life cycle sustainability analysis (LCSA) quantifying their impact on human activities/interventions are also included. Nanoencapsulation of pesticide formulations is an innovative approach in minimizing pesticide doses and ultimately reducing their direct exposures to humans and animals. Some of the established big players and new entrants in the global BS market are providing promising solutions for agricultural practices. In conclusion, a better understanding of the role of BSs in pesticide solubilization and/or degradation by microorganisms represents a valuable approach to reducing their negative impact and maintaining sustainable agricultural practices.
ABSTRACT
Over the past 15 years, glycolipid-type biosurfactant compounds have been postulated as novel, naturally synthesized anticancer agents. This study utilized a recombinant strain of Pseudomonas aeruginosa to biosynthesize a preparation of mono-rhamnolipids that were purified via both liquid and solid-phase extraction, characterized by HPLC-MS, and utilized to treat two colorectal cancer cell lines (HCT-116 and Caco2) and a healthy colonic epithelial cell line CCD-841-CoN. Additionally, the anticancer activity of these mono-rhamnolipids was compared to an alternative naturally derived anticancer agent, Piceatannol. XTT cell viability assays showed that treatment with mono-rhamnolipid significantly reduced the viability of both colorectal cancer cell lines whilst having little effect on the healthy colonic epithelial cell line. At the concentrations tested mono-rhamnolipids were also shown to be more cytotoxic to the colorectal cancer cells than Piceatannol. Staining of mono-rhamnolipid-treated cells with propidium iodine and acridine orange appeared to show that these compounds induced necrosis in both colorectal cancer cell lines. These data provide an early in vitro proof-of-principle for utilizing these compounds either as active pharmaceutical ingredient for the treatment of colorectal cancer or incorporations into nutraceutical formulations to potentially prevent gastrointestinal tract cancer.
ABSTRACT
Propane is a major component of liquefied petroleum gas, a major energy source for off-grid communities and industry. The replacement of fossil fuel-derived propane with more sustainably derived propane is of industrial interest. One potential production route is through microbial fermentation. Here we report, for the first time, the isolation of a marine bacterium from sediment capable of natural propane biosynthesis. Propane production, both in mixed microbial cultures generated from marine sediment and in bacterial monocultures was detected and quantified by gas chromatography-flame ionization detection. Using DNA sequencing of multiple reference genes, the bacterium was shown to belong to the genus Photobacterium. We postulate that propane biosynthesis is achieved through inorganic carbonate assimilation systems. The discovery of this strain may facilitate synthetic biology routes for industrial scale production of propane via microbial fermentation.
ABSTRACT
In the present study, 20 lactic acid bacteria (LAB) were isolated from different fruit juices, milk, and milk products. Based on preliminary screening methods like emulsification index, oil displacement method, hemolysis, and reduction in surface tension, strain LNH70 was selected for further studies. Further, it was evaluated for preliminary probiotic characteristics, identified by 16 s rRNA sequencing as Lactococcus lactis, submitted to NCBI, and an accession number was obtained (MH174454). In addition, LNH70 was found to tolerate over wide range of temperatures (10-45 °C), pH (3-10), NaCl (up to 9%), bile (0.7%), and phenol (0.1%) concentrations. Further, optimization studies at flask level revealed that lactose as carbon source, peptone as organic nitrogen, and inorganic nitrogen (ammonium sulfate) enhanced biosurfactant production. Chemical composition of purified biosurfactant obtained from LNH70 was characterized by various physico-chemical analytical techniques and identified as xylolipid. Xylolipid biosurfactant exhibited anti-adhesion activity against food borne pathogens in in vitro conditions. Its anti-oxidative property by 1, 1-diphenyl-2-picrylhydrazyl (DPPH), 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid (ABTS), and ferric reducing antioxidant power (FRAP) radical scavenging activity was found in range of 60.76 ± 0.5 to 83.50 ± 0.73%. Furthermore, xylolipid (0.05, 0.1, 0.3 mg/mL) when used for its potential as orange and pineapple juices preservation revealed miniature changes in the physico-chemical parameters evaluated in this study. However, the microbial population slightly lowered when xylolipid was used at 0.3 mg/mL after 5th day. Hence, this study supports the potential use of biosurfactant from L. lactis for its application as food preservative.
Subject(s)
Lactococcus lactis , Lactococcus lactis/genetics , Fruit and Vegetable Juices , Oxidation-Reduction , Antioxidants/pharmacology , Antioxidants/analysis , NitrogenABSTRACT
Surfactants are used to control microbial biofilms in industrial and medical settings. Their known toxicity on aquatic biota, and their longevity in the environment, has encouraged research on biodegradable alternatives such as rhamnolipids. While previous research has investigated the effects of biological surfactants on single species biofilms, there remains a lack of information regarding the effects of synthetic and biological surfactants in freshwater ecosystems. We conducted a mesocosm experiment to test how the surfactant sodium dodecyl sulfate (SDS) and the biological surfactant rhamnolipid altered community composition and metabolic activity of freshwater biofilms. Biofilms were cultured in the flumes using lake water from Lake Lunz in Austria, under high (300 ppm) and low (150 ppm) concentrations of either surfactant over a four-week period. Our results show that both surfactants significantly affected microbial diversity. Up to 36% of microbial operational taxonomic units were lost after surfactant exposure. Rhamnolipid exposure also increased the production of the extracellular enzymes, leucine aminopeptidase, and glucosidase, while SDS exposure reduced leucine aminopeptidase and glucosidase. This study demonstrates that exposure of freshwater biofilms to chemical and biological surfactants caused a reduction of microbial diversity and changes in biofilm metabolism, exemplified by shifts in extracellular enzyme activities. KEY POINTS: ⢠Microbial biofilm diversity decreased significantly after surfactant exposure. ⢠Exposure to either surfactant altered extracellular enzyme activity. ⢠Overall metabolic activity was not altered, suggesting functional redundancy.
Subject(s)
Leucyl Aminopeptidase , Surface-Active Agents , Biofilms , Ecosystem , Fresh Water/chemistry , Glucosidases/pharmacology , Leucyl Aminopeptidase/metabolism , Leucyl Aminopeptidase/pharmacology , Sodium Dodecyl Sulfate , Surface-Active Agents/pharmacology , Water/pharmacologyABSTRACT
Sophorolipids are glycolipid biosurfactants consisting of a carbohydrate sophorose head with a fatty acid tail and exist in either an acidic or lactonic form. Sophorolipids are gaining interest as potential cancer chemotherapeutics due to their inhibitory effects on a range of tumour cell lines. Currently, most anti-cancer studies reporting the effects of sophorolipids have focused on lactonic preparations with the effects of acidic sophorolipids yet to be elucidated. We produced a 94% pure acidic sophorolipid preparation which proved to be non-toxic to normal human colonic and lung cells. In contrast, we observed a dose-dependent reduction in viability of colorectal cancer lines treated with the same preparation. Acidic sophorolipids induced apoptosis and necrosis, reduced migration, and inhibited colony formation in all cancer cell lines tested. Furthermore, oral administration of 50 mg kg-1 acidic sophorolipids over 70 days to Apcmin+/- mice was well tolerated and resulted in an increased haematocrit, as well as reducing splenic size and red pulp area. Oral feeding did not affect tumour numbers or sizes in this model. This is the first study to show that acidic sophorolipids dose-dependently and specifically reduces colon cancer cell viability in addition to reducing tumour-associated bleeding in the Apcmin+/- mouse model. KEY POINTS: ⢠Acidic sophorolipids are produced by yeast species such as Starmerella bombicola. ⢠Acidic sophorolipids selectively killed colorectal cells with no effect on healthy gut epithelia. ⢠Acidic sophorolipids reduced tumour-associated gut bleed in a colorectal mouse model.
Subject(s)
Colorectal Neoplasms , Oleic Acids , Animals , Colorectal Neoplasms/drug therapy , Glycolipids/pharmacology , Hematocrit , Humans , MiceABSTRACT
There are numerous biosurfactant producing strains and products reported annually most of which aspiring to potential future industrial and environmental applications. Only a few of these compounds have reached commercial applications due to many impediments to large-scale production and applications. We investigate some of the important criteria and investigations required to achieve such future commercial application.
Subject(s)
Surface-Active AgentsABSTRACT
Melanomas account for 80% of skin cancer deaths. Due to the strong relationship between melanomas and U.V. radiation, sunscreens have been recommended for use as a primary preventative measure. However, there is a need for targeted, less invasive treatment strategies. Glycolipids such as sophorolipids and rhamnolipids are microbially derived biosurfactants possessing bioactive properties such as antimicrobial, immunomodulatory and anticancer effects. This study aimed to ascertain the differing effects of glycolipids on skin cells. Highly purified and fully characterized preparations of sophorolipids and rhamnolipids were used to treat spontaneously transformed human keratinocyte (HaCaT) and the human malignant melanocyte (SK-MEL-28) cell lines. Cell viability and morphological analyses revealed that glycolipids have differential effects on the skin cells dependent on their chemical structure. Lactonic sophorolipids and mono-rhamnolipids were shown to have a significantly detrimental effect on melanoma cell viability compared to healthy human keratinocytes. These glycolipids were shown to induce cell death via necrosis. Additionally, sophorolipids were shown to significantly inhibit SK-MEL-28 cell migration. These findings suggest that glycolipids could be used as bioactive agents with selective inhibitory effects. As such, glycolipids could be a substitute for synthetically derived surfactants in sunscreens to provide additional benefit and have the potential as novel anti-skin-cancer therapies.
ABSTRACT
A screening programme using mineral salt medium supplemented with n-hexadecane resulted in isolating a Bacillus megaterium SPSW1001 which was capable of producing surface active molecules lowering culture medium surface tension to 27.43 ± 0.029 mN/m and interfacial tension to 0.38 ± 0.03 mN/m at 72 h and an emulsification index (E24) (85.63%). The biosurfactant product was further used to assess its effects on the rheological characteristics of water-in-oil emulsion prepared with engine oil. Structural characterization of the biosurfactant product by FTIR revealed a C-O-C stretch in sugar moiety and ester carbonyl linkage group between sugar and fatty acids, respectively, while mass spectral analysis revealed its glycolipid nature, with an m/z value of 662.44. The fluid behaviour of water-in-oil emulsion showed a non-Newtonian viscoelastic dilatant flow after yielding exemplified appropriately by Herschel-Bulkley model with 100% confidence of fit. The present study is significant in formulation and handling, processing, and transport of emulsion and in understanding flocculation characteristics.