ABSTRACT
Sediment, as the destination of marine pollutants, often bears much more serious petroleum pollution than water. Biochar is increasingly utilized for remediating organic pollutant-laden sediments, yet its long-term impacts on oil-contaminated sediment remain poorly understood. In this study, simulation experiments adding 2.5 wt% biochars (corn straw and wood chips biochar at different pyrolysis temperatures) were conducted. The effects on petroleum hydrocarbon attenuation, enzyme activities, and microbial community structure were systematically investigated. Results showed enhanced degradation of long-chain alkanes in certain biochar-treated groups. Biochar species and PAH characteristics together lead to the PAHs' attenuation, with low-temperature corn straw biochar facilitating the degradation of phenanthrene, fluorene, and chrysene. Initially, biochars reduced polyphenol oxidase activity but increased urease and dehydrogenase activities. However, there was a noticeable rise in polyphenol oxidase activity for a long time. Biochars influenced bacterial community succession and abundance, likely due to nutrient release stimulating microbial activity. The structural equations model (SEM) reveals that DON affected the enzyme activity by changing the microbial community and thus regulated the degradation of PAHs. These findings shed light on biochar's role in bacterial communities and petroleum hydrocarbon degradation over extended periods, potentially enhancing biochar-based remediation for petroleum-contaminated sediments.
ABSTRACT
Excessive accumulation of total petroleum hydrocarbons (TPH) and heavy metals (HMs) in sediments poses a significant threat to the estuarine ecosystem. In this study, the spatial and temporal distribution, ecological risks, sources, and their impacts on the microbial communities of TPH and nine HMs in the estuarine sediments of the Xiaoqing River were determined. Results showed that the spatial distribution of TPH and HMs were similar but opposite in temporal. Ni, Cr, Pb, and Co concentrations were similar to the reference values (RVs). However, the other five HMs (Cu, Zn, Cd, As, and Hg) and TPH concentrations were 2.00-763.44 times higher than RVs; hence, this deserves attention, particularly for Hg. Owing to the water content of the sediments, Hg was mainly concentrated on the surface during the wet season and on the bottom during the dry season. Moreover, because of weak hydrodynamics and upstream pollutant sinks, TPH-HMs in the river were higher than those in the estuary. TPH and HM concentrations were negatively correlated with microbial diversity. Structural equation modeling showed that HMs (path coefficient = -0.50, p < 0.001) had a negative direct effect on microbial community structure and a positive indirect effect on TPH. The microbial community (path coefficient = 0.31, 0.01 < p < 0.05) was significantly correlated with TPH. In summary, this study explores both the chemical analysis of pollutants and their interaction with microbial communities, providing a better understanding of the co-pollution of TPH and HMs in estuarine sediments.
Subject(s)
Environmental Monitoring , Estuaries , Hydrocarbons , Metals, Heavy , Petroleum , Rivers , Water Pollutants, Chemical , Wetlands , Metals, Heavy/analysis , Water Pollutants, Chemical/analysis , China , Petroleum/analysis , Rivers/chemistry , Hydrocarbons/analysis , Geologic Sediments/chemistryABSTRACT
Considering the potential threats posed by oily wastewater to the ecosystem, it is urgently in demand to develop efficient, eco-friendly, and intelligent oil/water separation materials to enhance the safety of the water environment. Herein, an intelligent hydrogel-coated wood (PPT/PPy@DW) membrane with self-healing, self-cleaning, and oil pollution detection performances is fabricated for the controllable separation of oil-in-water (O/W) emulsions and water-in-oil (W/O) emulsions. The PPT/PPy@DW is prepared by loading polypyrrole (PPy) particles on the delignified wood (DW) membranes, further modifying the hydrogel layer as an oil-repellent barrier. The layered porous structure and selective wettability endow PPT/PPy@DW with great separation performance for various O/W emulsions (≥98.69% for separation efficiency and ≈1000 L m-2 h-1 bar-1 for permeance). Notably, the oil pollution degree of PPT/PPy@DW can be monitored in real-time based on the changed voltage generated during O/W emulsion separation, and the oil-polluted PPT/PPy@DW can be self-cleaned by soaking in water to recover its separation performance. The high affinity of PPT/PPy@DW for water makes it effective in trapping water from the mixed surfactant-stabilized W/O emulsions. The prepared eco-friendly and low-cost multifunctional hydrogel wood membrane shows promising potential in on-demand oil/water separation and provides new ideas for the functional improvement of new biomass oil/water separation membrane materials.
ABSTRACT
Seasonal water and sediment samples were collected from the Xiaoqing River estuary and the neighboring sea to study the spatial and temporal distributions, sources and ecological risks of polycyclic aromatic hydrocarbons (PAHs) and n-alkanes. The results showed significant spatial and temporal differences in the concentrations of PAHs and n-alkanes under the influence of precipitation, temperature, and human activities. The concentrations of PAHs in water were lower in the wet season than in the dry season, and those in sediments were higher in the wet season than in the dry season. The concentrations of n-alkanes were higher in the rainy season than in the dry season for both water and sediments. The spatial distributions of PAHs and n-alkanes were estuarine > offshore. The concentration ranges of ∑PAHs in water and sediments were 230.66-599.86 ng/L and 84.51-5548.62 ng/g, respectively, in the wet season and 192.46-8649.55 ng/L and 23.39-1208.92 ng/g, respectively, in the dry season. The proportion of three-ring PAHs in water (57.03% and 78.27% in the wet and dry seasons, respectively) was high, followed by two-ring PAHs (27.31% and 13.59% in the wet and dry seasons, respectively). The proportion of four-ring PAHs was higher in sediments (24.79% and 32.20% in the wet and dry seasons, respectively). The ecological risk of PAHs assessed using the toxicity equivalent quotient and risk quotient was at moderate to moderately high risk levels. The high concentration of n-alkane fraction C16 (611.65-75594.58 ng/L) in the water is indicative of petroleum or other fossil fuel inputs. The main peaks of n-alkanes in river sediments were C27, C29 and C31, indicating higher inputs of plant sources. The sediments in the estuary showed dominance of both short-chain C16 and long-chain C25-C31, indicating a combined input of higher plants and petroleum. The diagnostic ratios of PAHs and n-alkanes indicated that their sources were mainly oil/coal/biomass combustion and petroleum spills attributed to frequent vehicular, vessel and mariculture activities. Given the potential ecological risks of PAHs and n-alkanes in water and sediments, future studies should focus on their bioaccumulation and biotoxicity.
Subject(s)
Alkanes , Environmental Monitoring , Estuaries , Geologic Sediments , Polycyclic Aromatic Hydrocarbons , Rivers , Water Pollutants, Chemical , Polycyclic Aromatic Hydrocarbons/analysis , Rivers/chemistry , Geologic Sediments/chemistry , Geologic Sediments/analysis , Alkanes/analysis , Water Pollutants, Chemical/analysis , SeasonsABSTRACT
Marine microorganisms are primary drivers of the elemental cycling. The interaction between heterotrophic prokaryotes and biomarker (n-alkane) in Kuroshio Extension (KE) remains unclear. Here, we categorize KE into three characteristic areas based on ocean temperatures and nutrient conditions: Cold Water Area (CWA), Mixed Area (MA), and Warm Water Area (WWA). A total of 49 samples were collected during two-year voyage to identify the source of n-alkane and associated degrading microorganisms. Total n-alkane concentrations (Σn-Alk) in surface water (SW) spanned from 1,308 ng L-1 to 1,890 ng L-1, it was significantly higher (Tukey-Kramer test, p < 0.05) in MA than CWA and WWA. The Σn-Alk in surface sediments (SS) gradually increased from north to south, ranging from 5,982 ng g-1 to 37,857 ng g-1. Bacteria and algae were the primary sources of n-alkane in both SW and SS. Proteobacteria was the most widely distributed among three areas. The presence of Rhodobacteraceae with alkB was the primary reason affecting n-alkane concentrations in SW. The Gammaproteobacteria with alkB and alkR chiefly affected n-alkane concentrations in SS. In summary, n-alkane s serve as an energy source for particular microorganisms, shaping the unique oceanographic patterns.
Subject(s)
Alkanes , Seawater , Alkanes/analysis , Alkanes/metabolism , Seawater/microbiology , Seawater/chemistry , Bacteria/metabolism , Geologic Sediments/microbiology , Geologic Sediments/chemistry , Japan , Environmental MonitoringABSTRACT
Oil dispersion, a crucial process in oil transport, involves the detachment of oil droplets from slicks and their introduction into the water column, influencing subsequent oil migration and transformation. This study examines oil dispersion, considering characteristics, stability, and mechanisms, while evaluating the impact of dispersants and salinity. Results show the significant role of surfactant type in dispersants on oil dispersion characteristics, with anionic surfactants exhibiting higher sensitivity to salinity changes compared to nonionic surfactants. The dispersion efficiency varies with salinity, with anionic surfactants performing better in low salinity (<20) and nonionic surfactants showing superior performance at 30-35 salinities. Rheological analysis illustrates the breakup and coalescence of oil droplets within the shear rates of breaking waves. An increase in interfacial film rigidity impedes the coalescence of oil droplets, contributing to the dynamic stability of the oil-water hybrid system. The use of GM-2, a nonionic dispersant, results in the formation of a solid-like interface, characterized by increased elastic modulus, notably at 20 salinity. However, stable droplet size distribution (DSD) at 35 salinity for 60 h suggests droplets can remain dispersed in seawater. The enhancement of stability of oil dispersion is interpreted as the result of two mechanisms: stabilizing DSD and developing the strength of viscoelastic interfacial film. These findings offer insights into oil dispersion dynamics, highlighting the importance of surfactant selection and salinity in governing dispersion behavior, and elucidating mechanisms underlying dispersion stability.
Subject(s)
Surface-Active Agents , Surface-Active Agents/chemistry , Petroleum Pollution , Salinity , Rheology , Petroleum , Seawater/chemistryABSTRACT
Using membrane materials to purify viscous watery oil from industrial production processes and accidental oil spills is of great importance but still challenging. Based on the excellent electrical conductivity and electric-thermal conversion of poly(pyrrole) (PPy), a hydrophobic PPy-modified micro-fibrillated cellulose membrane (P-CP) was successfully prepared. The size of the P-CP membrane can be customized to meet specific requirements. In this research, the membrane diameter is capable of reaching 24 cm. By applying a voltage ranging from 0 to 12 V, the surface temperature of the P-CP membrane can be elevated to roughly 120 °C. After 10 cycles of heating and cooling under 12 V voltage, the electric-thermal curves, surface hydrophobicity, and pore structure of P-CP membrane can remain stable, which suggests remarkable electric-thermal stability and reliability despite prolonged operation. The P-CP membrane shows good linearity between voltage and current (R2 = 0.997) and easy temperature control from room temperature to â¼120 °C at low supply voltage (0-12 V). Under the condition of 12 V power supply and self-gravity, the separation flux of the P-CP membrane for water-in-oil (W/O) emulsions (kerosene, diesel) is 2-3 times higher than that at room temperature, and the separation efficiency is also improved. Importantly, the P-CP membrane shows excellent separation performance for high viscosity water-in-crude oil emulsions, with a separation flux of 40 L m-2 h-1 by gravity. Compared to the situation without electricity, the separation flux of water-in-crude oil emulsion has increased four-fold. The joule heating of the P-CP membrane expands its service time and application scenarios, demonstrating its great application prospects in actual viscous oil-water emulsion separation.
ABSTRACT
A quantitative understanding of spilled oil transport in a nearshore environment is challenging due to the complex physicochemical processes in aqueous conditions. The physicochemical processes involved in oil sinking mainly include oil dispersion, sediment settling, and oil-sediment interaction. For the first time, this work attempts to address the sinking mechanism in petroleum contaminant transport using structural causal models based on observed data. The effects of nearshore salinity distribution from the estuary to the ocean on those three processes are examined. The causal inference reveals sediment settling is the crucial process for oil sinking. Salinity indirectly affects oil sinking by promoting sediment settling rather than directly affecting oil-sediment interaction. The increase of salinity from 0 to 35 provides a natural enhancement for sediment settling. Notably, unbiased causal effect estimates demonstrate the strongest positive causal effect on the settling efficiency of sediments is posed by increasing oil dispersion effectiveness, with a normalized value of 1.023. The highest strength of the causal relationship between oil dispersion and sediment settling highlights the importance of the dispersing characteristics of spilled oil to sediment-facilitated oil transport. The employed logic, a data-driven method, will shed light on adopting advanced causal inference tools to unravel the complicated contaminants' transport.
ABSTRACT
Effective and durable photocatalysts are essential for the decomposition of persistent contaminants and the generation of hydrogen peroxide. In this study, we successfully constructed an S-type heterojunction by in situ growing Bi2O3 nanocrystals and NH2-MIL-101(Fe) onto surface-modified g-C3N4. The process of charge transfer in the S-type heterojunction was confirmed using ISI-XPS, DFT calculations, capture experiments, and EPR signals. The combined influence of the heterojunction and MOF demonstrated remarkable photocatalytic performance in the breakdown of tetracycline (TC) and the generation of hydrogen peroxide (H2O2). In the enhanced setup (10%-NH2-MIL-101(Fe)@MCN/Bi2O3), full degradation of TC was accomplished within 50 min under visible light exposure. Additionally, a notable H2O2 yield of 655.63 µmol/g was attained, all achieved without the necessity of sacrificial agents or supplementary oxygen. Based on the outcomes of the dual functionality, the exceptional performance of the ternary composite material can be ascribed to the collaborative influence of the heterojunction and MOF. This collaborative effect expands the light absorption range in the visible region, suppresses the recombination of electron-hole pairs, and enhances the photocatalytic redox ability. The system demonstrates significant potential in the efficient in situ production of H2O2 and removal of recalcitrant organic pollutants in pure water.
Subject(s)
Heterocyclic Compounds , Metal-Organic Frameworks , Hydrogen Peroxide , Tetracycline , Anti-Bacterial AgentsABSTRACT
Adsorbents play a vital role in responding to marine oil spills, yet effectively cleaning up viscous oil spills remains a technical challenge. Herein, we present a superhydrophobic oil-adsorbing felt prepared using melt-blown technology and functionally enhanced with a photoelectric composite CNT/PANI coating for effectively cleaning up high-viscosity oil spills. By virtue of its superior solar/Joule heating ability and thermally conductive fiber network, p-CNT/PANI@PP notably reduced crude oil viscosity and enhanced the oil diffusion coefficient within pores. Leveraging primarily solar heating and supplemented by Joule heating, p-CNT/PANI@PP demonstrates an impressive in-situ adsorption rate of up to 560 g/h for ultra-high-viscosity crude oil (c.a. 138000 mPa·s), alongside an adsorption capacity of 15.57 g/g. This measure enables efficient viscosity reduction and continuous day-and-night recovery of viscous crude oil, addressing the challenges posed by seasonal fluctuations in seawater temperature and adverse weather conditions. Moreover, a conveyorized collector integrated with an oil-adsorbing felt realizes continuous recovery of viscous oil spills with speed control to tackle varying thicknesses of oil film. Given the top-down material design, superior functionality, and applicability to applications, this work provides a comprehensive and feasible solution to catastrophic large-area viscous oil spills.
ABSTRACT
The frequent occurrence of oil spills has led to serious environmental pollution and ecological issues. Given the high-viscosity of crude oil, it is essential to develop sorbents with efficient viscosity reduction and sorption capacity in various environmental conditions. Herein, a superhydrophobic carboxymethyl cellulose (CMC) aerogel co-modified by MXene and graphene jointly (M-Mxene/Gr CA) with aligned channels structure was prepared. The aligned channels structure can effectively improve the longitudinal thermal conductivity and reduce the sorption resistance. Through the modification of MXene and graphene, the aerogel realized efficient photo/electro-thermal conversion, thus ensuring its adaption to various working environments. The rapid heat generation can significantly reduce the viscosity of crude oil, achieving rapid recovery. Under one sun illumination (1.0 kW/m2), the surface temperature of M-Mxene/Gr CA can reach 72.6 °C and its sorption capability for high-viscous crude oil reaches 18 g/g. Combining photo-thermal and electro-thermal (0.5 kW/m2 and 23 V), the average sorption rate of crude oil can reach 1.3 × 107 g m-3 s-1. Finally, we present a continuous sorption system to recover offshore oil spills under the assistance of a pump. This work provides a new option for tackling high-viscous offshore oil spills due to its environmental friendliness and fast sorption capacity.
ABSTRACT
Rapid and efficient recovery of oil spill is the key link for oil spill remediation, and also a great challenge. Here, the organogelator-polymerized porous matrix composed of adsorbents and organogelators can provide a new strategy for solving this problem. The gelling mechanism of aluminum 12-hydroxystearate (Al HSA) to form spherical nano micelles in solvents was investigated via UV-vis, FT-IR, and XRD. A creative method for aluminum soap-lignin gelator (OTS-AL/Al HSA) syntheses was put forward through the saponification of 12-hydroxystearic acid (HSA) and lignin via epichlorohydrin (ECH) crosslinking. By adjusting the ECH content, the growth of Al HSA nanoparticles (15-40 nm) on lignin can be realized, and the accordingly increased roughness endowed gelator with better hydrophobicity (WCA of 134.6°) before octadecyltrichlorosilane (OTS) modification. Thanks to the porous structures, the gelator powder exhibited a high sorption capacity in the range of 3.5-5.2 g g-1 for oils and organic solvents. Rheological studies demonstrated high mechanical strength of gels (>1.6 × 105 pa) and the gelator still retained 70% sorption capacity after 6 gelation-distillation cycles. The gelation characteristics of OTS-AL/Al HSA were attributed to the rapid sorption of oils by lignin and the self-assembly of Al HSA nano micelles on lignin to form an aggregated network structure trapping oils, thus realizing the synergistic effect of oil sorption-gelation.
Subject(s)
Lignin , Water , Water/chemistry , Powders , Aluminum , Soaps , Spectroscopy, Fourier Transform Infrared , Oils/chemistry , Solvents/chemistry , Gels/chemistryABSTRACT
Polysaccharides derived from microorganisms exhibit diverse structures and bioactivities, making them promising candidates for the treatment of various diseases. However, marine-derived polysaccharides and their activities are relatively little known. In this work, fifteen marine strains were isolated from surface sediments in the Northwest Pacific Ocean for screening of EPS production. Planococcus rifietoensis AP-5 produced a maximum yield of EPS at 4.80 g/L. The purified EPS (referred to as PPS) had a molecular weight of 51,062 Da and contained amino, hydroxyl, and carbonyl groups as its major functional groups. PPS primarily consisted of â3)-α-D-Galp-(1 â 4)-α-D-Manp-(1 â 2)-α-D-Manp-(1 â 4)-α-D-Manp-(1 â 4,6)-α-D-Glcp-(1 â 6)-ß-D-Galp-(1â, with a branch consisting of T-ß-D-Glcp-(1â. Additionally, surface morphology of PPS was hollow, porous, and sphere-like stack. PPS primarily contained C, N, and O elements, with a surface area of 33.76 m2/g, a pore volume of 0.13 cc/g, and a pore diameter of 1.69 nm, respectively. Based on the TG curve, the degradation temperature of PPS was measured to be 247 °C. Furthermore, PPS demonstrated immunomodulatory activity through dose-dependently upregulating the expression level of cytokines. It significantly enhanced the cytokine secretion at a concentration of 5 µg/mL. To sum up, this study offers valuable insights for screening marine polysaccharide-based immunomodulators.
Subject(s)
Immunologic Factors , Polysaccharides , Polysaccharides/pharmacology , Polysaccharides/chemistry , Immunologic Factors/pharmacology , Immunologic Factors/chemistry , Cytokines , Molecular WeightABSTRACT
The coast of Laizhou Bay is plagued by a number of environmental issues, such as eutrophication, which are likely to worsen over the next few decades as a result of trends toward industrialization and urbanization. High nutrient levels in the Xiaoqing River are believed to be the main cause of Laizhou Bay becoming eutrophicated. Therefore, we conducted two cruises from the Xiaoqing River estuary to Laizhou Bay in August 2022 and December 2022, respectively, in the wet and dry periods to assess the potential impact of status of eutrophication due to human activities. The results showed that the concentration of DIN was higher than the quality standard for water (fi > 1) in both the wet season (August 2022) and the dry season (December 2022). DIN has major environmental impacts in Laizhou Bay. The eutrophication level index and organic pollution index have obvious spatial and temporal characteristics. In terms of time, the dry season is higher than the wet season. In space, Xiaoqing estuary is higher than Laizhou Bay. In the two surveys, DIN and DIP concentrations were significantly positively correlated, indicating that N and P pollution in the region had a common source and destination, and the spatial distribution was also similar. In addition, the current environmental conditions in the region are not ideal, reaching moderate and severe eutrophication levels, which proves that the ecosystem has the risk of aggravating degradation. As the Xiaoqing River is about to resume full navigation, human-related nutrient input (especially DIN) will continue to increase, and it is expected that the eutrophication risk in this area will increase in the next few years due to the increase in nutrient load.
Subject(s)
Ecosystem , Rivers , Humans , Estuaries , Bays , Environmental Monitoring/methods , Eutrophication , China , Nitrogen/analysisABSTRACT
Intimately coupled photocatalysis and biodegradation (ICPB) systems represent a promising wastewater treatment technology. The implementation of ICPB systems for oil spill treatment is a pressing concern. In this study, we developed an ICPB system comprising BiOBr/modified g-C3N4 (M-CN) and biofilms for the treatment of oil spills. The results demonstrate that the ICPB system achieved the rapid degradation of crude oil, outperforming the single photocatalysis and biodegradation methods by degrading 89.08 ± 5.36% within 48 h. The combination of BiOBr and M-CN formed a Z-scheme heterojunction structure, enhancing the redox capacity. The interaction between the holes (h+) and the negative charge on the biofilm surface promoted the separation of electrons (e-) and h+, thereby accelerating the degradation process of crude oil. Moreover, ICPB system maintained an excellent degradation ratio after three cycles and its biofilms progressively adapted to the adverse effects of crude oil and light. The microbial community structure remained stable throughout the degradation of crude oil, with Acinetobacter and Sphingobium identified as the dominant genera in biofilms. The proliferation of the Acinetobacter genus appeared to be the main factor contributing to the promotion of crude oil degradation. Our work demonstrates that the integrated tandem strategies perhaps represent a feasible pathway toward practical crude oil degradation.
Subject(s)
Petroleum , Bismuth , Biodegradation, Environmental , BiofilmsABSTRACT
Oil spills interact with mineral particles to form oil-particle aggregates (OPAs), which promotes the oil's natural diffusion and biodegradation. We investigated the effect of bacteria on the formation and vertical migration of OPAs under different concentrations and types of particles and proposed and elucidated an oil-particle-bacteria coupling mechanism. The depth of particle penetration into oil droplets (13-17 µm) was more than twice that of the nonbacterial group. Oil that remained in the water column and deposited to the bottom decreased from 87% to 49% and increased from 14% to 15% at high/low concentration, respectively. Interestingly, the median droplet diameter showed a negative correlation (R2 = 0.83) and positive correlation (R2 = 0.60) at high/low concentration, respectively, with the relative penetration depth first proposed. We further demonstrated that bacteria increased the penetrating depth by a combination of reducing/increasing the interfacial tension, reducing the oil amount (C17-C38) in the OPAs, and increasing the particle width. These effects reduced the droplet size and ultimately changed the vertical migration of OPAs. Finally, we provided a simple assessment of the vertical distribution of OPAs in nearshore environments based on experimental data and suggested that the role of bacteria in increasing the depth of particles penetrating into the oil droplets should not be ignored. These findings will broaden the research perspective of marine oil spill migration.
Subject(s)
Petroleum Pollution , Petroleum , Water Pollutants, Chemical , Water Pollutants, Chemical/analysis , Oils , Water , MineralsABSTRACT
The oil spreading technique relies on biosurfactant to reduce the surface tension of an oil film and form an oil spreading ring in the center, and then judges the content of biosurfactant according to the diameter of the spreading ring. However, the instability and large errors of the traditional oil spreading technique limit its further application. In this paper, we modified the traditional oil spreading technique by optimizing the oily material, image acquisition and calculation method, which improves the accuracy and stability of the quantification of biosurfactant. We screened lipopeptides and glycolipid biosurfactants for rapid and quantitative analysis of biosurfactant concentrations. By selecting areas by color done by the software to modify image acquisition, the results showed that the modified oil spreading technique has a good quantitative effect, reflected in the concentration of biosurfactant being proportional to the diameter of the sample droplet. More importantly, using the pixel ratio method instead of the diameter measurement method to optimize the calculation method, the region selection was more exact, and the accuracy of the data results was high, and the calculation efficiency was improved significantly. Finally, the contents of rhamnolipid and lipopeptide in oilfield water samples were judged by the modified oil spreading technique, the relative errors were analyzed according to the different substances as the standard, and the quantitative measurement and analysis of oilfield water samples (the produced water of Zhan 3-X24 and the injected water of the estuary oil production plant) were realized. The study provides a new perspective on the accuracy and stability of the method in the quantification of biosurfactant, and provided some theoretical and data support for the study of the microbial oil displacement technology mechanism.
ABSTRACT
Biomarkers offer unique insights into the state of the environment, but little is known about how they interact with microbial communities in the open ocean. This study investigated the correlative effects between microbial communities and n-alkane distribution in surface seawater and sediments from the Kuroshio Extension in the Northwest Pacific Ocean. The n-alkanes in both surface seawater and surface sediments were mostly derived from algae and higher plants, with some minor contributions from anthropogenic and biological sources. The composition of microbial communities in surface seawater and sediments was different. In surface seawater, the dominant taxa were Vibrio, Alteromonas, Clade_Ia, Pseudoalteromonas, and Synechococcus_CC9902, while the taxa in the sediments were mostly unclassified. These variations/fluctuations of n-alkanes in three areas caused the aggregation of specialized microbial communities (Alteromonas). As the characteristic composition indexes of two typical n-alkanes, Short-chain n-alkane carbon preference index (CPI-L) and long-chain n-alkane carbon preference index (CPI-H) significantly influenced the microbial community structure in surface seawater, but not in surface sediments. Effect of CPI on microbial communities may be attributed to anthropogenic inputs or petroleum pollution. The abundance of hydrocarbon degradation genes also varied across the three different areas. Our work underscores that n-alkanes in the oceans alter the microbial community structure and enrich associated degradation genes. The functional differences in microbial communities within different areas contribute to their ecological uniqueness.
Subject(s)
Alkanes , Seawater , Alkanes/analysis , Pacific Ocean , Seawater/chemistry , Oceans and Seas , Carbon/analysis , Geologic Sediments/chemistryABSTRACT
Fluorine pollution has become a global public health problem due to its adverse health effects. Adsorption is the primary method for removing fluoride from drinking water. However, the adsorption method has disadvantages such as difficulty in recovering the adsorbent, and the need to add additional chemicals for regeneration, thereby causing secondary pollution, which limits further industrial applications. Capacitive deionization (CDI), as an emerging water treatment technology, has attracted widespread attention due to its advantages of simple operation, low energy consumption and less environmental impact. In this study, a polypyrrole (PPy) film was prepared on a graphite substrate by electrodeposition, and then metal-organic framework Ce/Zn-BDC-NH2 (CZBN) was deposited on the PPy film by electrophoretic deposition to obtain CZBN/PPy electrode was obtained. The CZBN/PPy anode was then coupled with the MnO2 cathode for capacitive removal of fluoride in a CDI cell. Both CZBN/PPy and MnO2 electrodes exhibit pseudocapacitive behavior, which can selectively and reversibly intercalate F- (CZBN/PPy) and Na+ (MnO2) ions. As expected, the CZBN/PPy-MnO2 system exhibits excellent fluorine removal performance. In 1.2 V, 100 mg/L F- solution, the F- removal capacity can reach 55.12 mg/g. It has high F- selectivity in the presence of some common anions, and can maintain high F- removal ability even after five adsorption regeneration processes. The mechanism of F- removal was studied by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). F- was mainly removed by electrostatic interaction and ion exchange with hydroxyl. The excellent defluorination performance of the CZBN/PPy-MnO2 system makes it have good practical application prospects.
Subject(s)
Polymers , Water Purification , Polymers/chemistry , Pyrroles/chemistry , Fluorides , Fluorine , Electroplating , Manganese Compounds , Oxides , Electrodes , Water Purification/methodsABSTRACT
Efficient and safe recovery of high-viscosity marine crude oil spills is still a worldwide challenge. High-viscosity crude oil is difficult to be removed by traditional adsorbent materials. Although some recent developments in photothermal or electric-thermal oil-absorbing materials, the vertical heat transfer inside and the potential hazard of electrical leakage are difficult to be guaranteed. In order to overcome these problems, we polymerized dopamine (DA) in situ on the skeleton surface of the commercial melamine sponge (MS), and further coated the full-wavelength light-absorbing Fe3O4 NPs-Graphene (HF-G) on it to obtain the superhydrophobic sponge with excellent photothermal conversion effect, heat conductivity and magnetic heating capabilities (HF-G/PDA@MS). When the thickness of sponge is 5 mm, the HF-G/PDA@MS shows excellent vertical heat conductivity ability, and can absorb about 80 g/g. It also can be combined with an extra electric-heating device to achieve continuous heating to reduce the viscosity and recover crude oil at night or extreme weather. In addition, the temperature of HF-G/PDA@MS can reach about 40 °C by electromagnetic induction heater, indicating that we can use multiple energies-assisted modes to heat the HF-G/PDA@MS to. This work provides a promising solution and theoretical support for all-weather solving offshore crude oil spills pollution and recovery.