Nanoscale phase management of the 2D/3D heterostructure toward efficient perovskite solar cells.

The stabilization of the formamidinium lead iodide (FAPbI3) structure is pivotal for the development of efficient photovoltaic devices. Employing two-dimensional (2D) layers to passivate the three-dimensional (3D) perovskite is essential for maintaining the α-phase of FAPbI3 and enhancing the power conversion efficiency (PCE) of perovskite solar cells (PSCs). However, the role of bulky ligands in the phase management of 2D perovskites, crucial for the stabilization of FAPbI3, has not yet been elucidated. In this study, we synthesized nanoscale 2D perovskite capping crusts with  = 1 and 2 Ruddlesden-Popper (RP) perovskite layers, respectively, which form a type-II 2D/3D heterostructure. This heterostructure stabilizes the α-phase of FAPbI3, and facilitates ultrafast carrier extraction from the 3D perovskite network to transport contact layer. We introduced tri-fluorinated ligands to mitigate defects caused by the halide vacancies and uncoordinated Pb2+ ions, thereby reducing nonradiative carrier recombination and extending carrier lifetime. The films produced were incorporated into PSCs that not only achieved a PCE of 25.39% but also maintained 95% of their initial efficiency after 2000 h of continuous light exposure without encapsulation. These findings underscore the effectiveness of a phase-pure 2D/3D heterostructure-terminated film in inhibiting phase transitions passivating the iodide anion vacancy defects, facilitating the charge carrier extraction, and boosting the performance of optoelectronic devices.

Constrained patterning of orientated metal chalcogenide nanowires and their growth mechanism.

One-dimensional metallic transition-metal chalcogenide nanowires (TMC-NWs) hold promise for interconnecting devices built on two-dimensional (2D) transition-metal dichalcogenides, but only isotropic growth has so far been demonstrated. Here we show the direct patterning of highly oriented Mo6Te6 NWs in 2D molybdenum ditelluride (MoTe2) using graphite as confined encapsulation layers under external stimuli. The atomic structural transition is studied through in-situ electrical biasing the fabricated heterostructure in a scanning transmission electron microscope. Atomic resolution high-angle annular dark-field STEM images reveal that the conversion of Mo6Te6 NWs from MoTe2 occurs only along specific directions. Combined with first-principles calculations, we attribute the oriented growth to the local Joule-heating induced by electrical bias near the interface of the graphite-MoTe2 heterostructure and the confinement effect generated by graphite. Using the same strategy, we fabricate oriented NWs confined in graphite as lateral contact electrodes in the 2H-MoTe2 FET, achieving a low Schottky barrier of 11.5 meV, and low contact resistance of 43.7 Ω µm at the metal-NW interface. Our work introduces possible approaches to fabricate oriented NWs for interconnections in flexible 2D nanoelectronics through direct metal phase patterning.

Ferroelasticity in Two-Dimensional Hybrid Ruddlesden-Popper Perovskites Mediated by Cross-Plane Intermolecular Coupling and Metastable Funnel-like Phases.

Ferroelasticity is a phenomenon in which a material exhibits two or more equally stable orientation variants and can be switched from one form to another under an applied stress. Recent works have demonstrated that two-dimensional layered organic-inorganic hybrid Ruddlesden-Popper perovskites can serve as ideal platforms for realizing ferroelasticity, however, the ferroelastic (FE) behavior of structures with a single octahedra layer such as (BA)2PbI4 [BA = CH3(CH2)3NH3+] has remained elusive. Herein, by using a combined first-principles and metadynamics approach, the FE behavior of (BA)2PbI4 under mechanical and thermal stresses is uncovered. FE switching is mediated by cross-plane intermolecular coupling, which could occur through multiple rotational modes, rendering the formation of FE domains and several metastable paraelastic (PE) phases. Such metastable phases are akin to wrinkled structures in other layered materials and can act as a "funnel" of hole carriers. Thermal excitation tends to flatten the kinetic barriers of the transition pathways between orientation variants, suggesting an enhanced concentration of metastable PE states at high temperatures, while halogen mixing with Br raises these barriers and conversely lowers the concentration of PE states. These findings reveal the rich structural diversity of (BA)2PbI4 domains, which can play a vital role in enhancing the optoelectronic properties of the perovskite and raise exciting prospects for mechanical switching, shape memory, and information processing.

ARPES detection of superconducting gap sign in unconventional superconductors.

The superconducting gap symmetry is crucial in understanding the underlying superconductivity mechanism. Angle-resolved photoemission spectroscopy (ARPES) has played a key role in determining the gap symmetry in unconventional superconductors. However, it has been considered so far that ARPES can only measure the magnitude of the superconducting gap but not its phase; the phase has to be detected by other phase-sensitive techniques. Here we propose a method to directly detect the superconducting gap sign by ARPES. This method is successfully validated in a cuprate superconductor Bi2Sr2CaCu2O8+δ with a well-known d-wave gap symmetry. When two bands have a strong interband interaction, the resulted electronic structures in the superconducting state are sensitive to the relative gap sign between the two bands. Our present work provides an approach to detect the gap sign and can be applied to various superconductors, particularly those with multiple orbitals like the iron-based superconductors.

Fundamentally Manipulating the Electronic Structure of Polar Bifunctional Catalysts for Lithium-Sulfur Batteries: Heterojunction Design versus Doping Engineering.

Heterogeneous structures and doping strategies have been intensively used to manipulate the catalytic conversion of polysulfides to enhance reaction kinetics and suppress the shuttle effect in lithium-sulfur (Li-S) batteries. However, understanding how to select suitable strategies for engineering the electronic structure of polar catalysts is lacking. Here, a comparative investigation between heterogeneous structures and doping strategies is conducted to assess their impact on the modulation of the electronic structures and their effectiveness in catalyzing the conversion of polysulfides. These findings reveal that Co0.125Zn0.875Se, with metal-cation dopants, exhibits superior performance compared to CoSe2/ZnSe heterogeneous structures. The incorporation of low Co2+ dopants induces the subtle lattice strain in Co0.125Zn0.875Se, resulting in the increased exposure of active sites. As a result, Co0.125Zn0.875Se demonstrates enhanced electron accumulation on surface Se sites, improved charge carrier mobility, and optimized both p-band and d-band centers. The Li-S cells employing Co0.125Zn0.875Se catalyst demonstrate significantly improved capacity (1261.3 mAh g-1 at 0.5 C) and cycle stability (0.048% capacity delay rate within 1000 cycles at 2 C). This study provides valuable guidance for the modulation of the electronic structure of typical polar catalysts, serving as a design directive to tailor the catalytic activity of advanced Li-S catalysts.

On the topological surface states of the intrinsic magnetic topological insulator Mn-Bi-Te family.

We review recent progress in the electronic structure study of intrinsic magnetic topological insulators (MnBi2Te4) · (Bi2Te3)n ([Formula: see text]) family. Specifically, we focus on the ubiquitously (nearly) gapless behavior of the topological Dirac surface state observed by photoemission spectroscopy, even though a large Dirac gap is expected because of surface ferromagnetic order. The dichotomy between experiment and theory concerning this gap behavior is perhaps the most critical and puzzling question in this frontier. We discuss various proposals accounting for the lack of magnetic effect on the topological Dirac surface state, which are mainly categorized into two pictures, magnetic reconfiguration and topological surface state redistribution. Band engineering towards opening a magnetic gap of topological surface states provides great opportunities to realize quantized topological transport and axion electrodynamics at higher temperatures.

Mechanism of Interaction of Water above the Methylammonium Lead Iodide Perovskite Nanocluster: Size Effect and Water-Induced Defective States.

Water is often viewed as detrimental to organic halide perovskite stability. However, evidence highlights its efficacy as a solvent during organic perovskite liquid synthesis. This paradox prompts an investigation into water's influence on perovskite nanoclusters. Employing first principle calculations and ab initio molecular dynamics simulations, surprisingly, we discover some subsurface layers of methylammonium lead iodide (MAPbI3) nanoclusters exhibit stronger relaxation than surface layers. Moreover, a strong quantum confinement effect enhances the band gap of MAPbI3 as the nanocluster size decreases. Notably, the water molecules above MAPbI3 nanoclusters induce rich localized defect states, generating low-lying shallow states above the valence band for the small amounts of surface water molecules and band-like deep states across the whole gap for large nanoclusters. This work provides insights into water's role in the electronic structure and structural evolution of perovskite nanoclusters, aiding the design of water-resistant layers to protect perovskite quantum dots from ambient humidity.