AISI 304L stainless steel is widely used in the processing equipment and food and beverage handling industries due to its corrosion resistance, hygienic properties, and cost-effectiveness. However, it is prone to pitting and crevice corrosion phenomena, the development of which can be influenced by factors such as chloride concentration, temperature, humidity, and bacterial presence. Surface treatments, including roughness levels and residual tensile stress, can significantly affect the corrosion behavior and resistance of the material. This study aims to evaluate the impact of three different surface treatments on the durability of AISI 304L steel. The correlation between surface roughness resulting from pre-treatment and pitting potential values will be examined. Additionally, the influence of different concentrations of biocide additives on surface durability will be assessed to determine the maximum effective concentration for preventing pitting phenomena. Passivation processes will also be evaluated as a potential solution for improving the pitting potential and overall durability of the components. By optimizing surface treatments and biocide concentrations, improved corrosion resistance and durability can be achieved, ensuring the long-term performance and reliability of AISI 304L steel components in critical applications such as food processing and beverage handling.
The objective of this study is to evaluate how two varying amounts of sepiolite-based powder, infused with indigo extract, affect the appearance and durability of a water-based, white primer. To examine the influence of this eco-friendly pigment on the coatings' overall appearance, assessments were performed for color, gloss, and surface roughness. Additionally, the coatings were investigated through optical and electron microscopic observations, to evaluate the distribution of the pigment within the polymer matrix. The effect of the pigment on the coating's durability was assessed through accelerated tests, including exposure in a salt spray chamber and a UV-B chamber. These tests aimed to evaluate the emergence of defects and changes in the appearance of the samples over time. Furthermore, the impact of different quantities of sepiolite-based powder on the coating's ability to act as a barrier was assessed using liquid resistance tests and contact angle measurements. These evaluations aimed to understand how the coating responded to various liquids and its surface properties concerning repellency or absorption. In essence, this study underscores the considerable influence of the eco-friendly pigment, demonstrating its capacity to introduce unique color and texture variations in the paint. Moreover, the inclusion of the pigment has enhanced the coating's color stability, its ability to act as a barrier, and its overall durability when exposed to harsh environments.
This work aims to highlight the multiple features shown by curcuma-based pigment and rice bran wax, which can be selectively employed as bio-based additives for the realization of multilayer wood coatings with multiple functionalities, harnessing the capabilities of the two environmentally friendly fillers, in line with current environmental sustainability trends. The role of the two green materials on the morphology of the composite layers was examined through observations employing scanning electron and optical microscopy, revealing a strong alteration of the film's appearance, both its color and reflectivity. Additionally, their influence on the paint's resilience was assessed by exposing the samples to UV-B radiation and consecutive thermal shocks. The coating displayed a clear and uniform change in color because of substantial curcuma powder photo-degradation but it remained exceptionally stable when subjected to thermal stresses. Moreover, the protective properties of the coatings were evaluated by conducting liquid resistance tests and water uptake tests, while the hardness and the abrasion resistance of the coatings were assessed to evaluate the effect of the additives on the mechanical properties of the coatings. In conclusion, this study showcases the promising joint action of curcuma-based pigment and rice bran wax in multilayer coatings. This combination offers vibrant yellow tones and an appealing appearance to the paint, enhances the surface's water-repellent properties, and improves the mechanical resistance of the coatings.
This work aims to represent a standard application for understanding the extent of the antibacterial efficacy of coatings with different amounts of colloidal silver on wooden surfaces over time. The key variable that was intended to be evaluated in this study was the "time efficiency," with concerns about the possible efficacy in the durability of the surfaces. By highlighting the "expiry date" of the agents, as in the case with other products, the study aimed to confirm the validity of the simulation tests conducted in the laboratory with degradation tests. Furthermore, the role of the silver amount on the barrier performance of the coatings was assessed by liquid resistance, water uptake, and perspiration tests, evaluating the aesthetic durability of the coatings by means of colorimetric analyses. Ultimately, this work demonstrates that these coatings may represent alternatives in terms of prolonged antimicrobial activity when compared with the biocide agents currently in use, capable to offer good resistance to detergent solutions and to water. Nevertheless, due to silver's susceptibility to extended exposure to acidic solutions, the findings of the research discourage the utilization of colloidal silver in wood paints intended for use in public settings. KEY POINTS: ⢠Colloidal silver does not alter the deposition process and does not introduce defects in the wood paint. ⢠Coatings containing silver show high antimicrobial activity over time, against both E.coli and S.aureus. ⢠The silver-based filler resists contact with detergents and aqueous solutions but suffers oxidation processes in acidic environments.
Anti-Infective Agents , Silver , Silver/pharmacology , Wood , Anti-Bacterial Agents/pharmacology , Water , Escherichia coli , Coated Materials, Biocompatible
This study aims to assess the effect of hollow glass microspheres of different sizes derived from glass industry waste on the durability and thermal behavior of waterborne paint. The coatings were characterized by electron microscopy to investigate the distribution of the spheres and their influence on the layer morphology. The impact of the various glassy spheres on the mechanical feature of the coatings was assessed using the Buchholz hardness test and the Scrub abrasion test. The role of the spheres in altering the durability of the samples was analyzed by the salt spray exposure test and the electrochemical impedance spectroscopy measurements. Finally, a specific accelerated degradation test was carried out to explore the evolution of the thermal behavior of the composite coatings. Ultimately, this work revealed the pros and cons of using hollow glass spheres as a multifunctional paint filler, highlighting the size of the spheres as a key parameter. For example, spheres with adequate size (25-44 µm), totally embedded in the polymeric matrix, are able to reduce the thermal conductivity of the coating avoiding local heat accumulation phenomena.
Frequently touched surfaces (FTS) that are contaminated with pathogens are one of the main sources of nosocomial infections, which commonly include hospital-acquired and healthcare-associated infections (HAIs). HAIs are considered the most common adverse event that has a significant burden on the public's health worldwide currently. The persistence of pathogens on contaminated surfaces and the transmission of multi-drug resistant (MDR) pathogens by way of healthcare surfaces, which are frequently touched by healthcare workers, visitors, and patients increase the risk of acquiring infectious agents in hospital environments. Moreover, not only in hospitals but also in high-traffic public places, FTS play a major role in the spreading of pathogens. Consequently, attention has been devoted to developing novel and alternative methods to tackle this problem. This study planned to produce and characterize innovative functionalized enameled coated surfaces supplemented with 1% AgNO3 and 2% AgNO3. Thus, the antimicrobial properties of the enamels against relevant nosocomial pathogens including the Gram-positive Staphylococcus aureus and the Gram-negative Escherichia coli and the yeast Candida albicans were assessed using the ISO:22196:2011 norm.
Anti-Infective Agents , Cross Infection , Humans , Antifungal Agents/pharmacology , Silver/pharmacology , Anti-Infective Agents/pharmacology , Anti-Bacterial Agents/pharmacology , Cross Infection/prevention & control , Cross Infection/microbiology , Microbial Sensitivity Tests
Today, the use of silver in surfaces for public environments is very frequent, as it ensures high antimicrobial activities, avoiding the continuous disinfection of the surfaces themselves. Similarly, thanks to its interesting combination of technological properties, anodized aluminum is widely employed in the production of components for applications in public spaces. Therefore, this work describes a simple method of the codeposition of silver and anodized aluminum to combine the remarkable properties of Al2O3 layers with the antibacterial performances of silver. The effect of silver in modifying the durability features of the anodized aluminum layer was evaluated by means of various accelerated degradation techniques, such as the exposure in a climatic chamber to UV-B radiation or an aggressive atmosphere simulated by the Kesternich test. These analyses showed the good compatibility between Ag and the alumina matrix, whose durability performances were not particularly influenced by silver. Furthermore, the composite layers did not express relevant cytotoxicity activity, as evidenced by Trypan blue flow cytometry analysis and microscopy observations, ensuring the possible use of this material in applications in close contact with humans. This same conclusion was reached by observing an almost negligible ionic release of Ag by the composite layers, even following severe degradation of the alumina matrix due to exposure to a particular acid solution. In conclusion, this work presents an innovative material that can be used in public spaces, thanks to its interesting combination of high durability and low cytotoxicity.
This study aims to demonstrate the remarkable features of graphene-based fillers, which are able to improve the protective performance of acrylic coatings. Furthermore, the joint application of a cataphoretic primer and a spray top coat, containing graphene and functionalized graphene oxide flakes, respectively, enables the deposition of a double-layer coating with high conductivity and abrasion resistance properties, capable of offering excellent corrosion resistance to the metal substrate. The surface morphology of the single- and double-layer coatings was investigated by optical and electron microscopies, analysing the defectiveness introduced in the polymer matrix due to the filler agglomeration. The behavior in aggressive environments was assessed by exposure of the samples in the salt spray chamber, evaluating the blister formation and the adhesion level of the coatings. Electrochemical impedance spectroscopy measurements were employed to study the corrosion protection properties of the coatings, whose conductivity and abrasion resistance features were analysed by conductivity assessment and scrub tests, respectively. The incorporation of graphene-based fillers in the cataphoretic primer improves the corrosion protection properties of the system, while the graphene flakes provide the top coat spray layer with high conductivity and excellent abrasion resistance features. Thus, this work demonstrates the possibility of employing different types of graphene-based fillers and deposition methods for the creation of multifunctional coatings.
The functional properties displayed by graphene oxide (GO)-polymer nanocomposites are strongly affected by the dispersion ability of GO sheets in the polymeric matrix, which can be largely improved by functionalization with organosilanes. The grafting to GO of organosilanes with the general formula RSi(OCH3)3 is generally explained by the condensation reactions of silanols with GO reactive groups. In this study, the influence of the organic group on the RSi(OCH3)3 grafting ability was analyzed in depth, taking into account the interactions of the R end chain group with GO oxidized groups. Model systems composed of commercial graphene oxide reacted with 3-aminopropyltrimethoxysilane (APTMS), 3-mercaptopropyltrimethoxysilane (MPTMS), and 3-methacryloxypropyltrimethoxysilane, (MaPTMS), respectively, were characterized by natural abundance 13C, 15N and 29Si solid state nuclear magnetic resonance (NMR), x-ray diffraction (XRD), and electron spin resonance (ESR). The silane organic tail significantly impacts the grafting, both in terms of the degree of functionalization and direct interaction with GO reactive sites. Both the NMR and XRD proved that this is particularly relevant for APTMS and to a lower extent for MPTMS. Moreover, the epoxy functional groups on the GO sheets appeared to be the preferential anchoring sites for the silane condensation reaction. The characterization approach was applied to the GO samples prepared by the nitric acid etching of graphene and functionalized with the same organosilanes, which were used as a filler in acrylic coatings obtained by cataphoresis, making it possible to correlate the structural properties and the corrosion protection ability of the layers.
