Precursor Epithelial Subtypes of Adenocarcinoma Arising from Intraductal Papillary Mucinous Neoplasms (A-IPMN): Clinicopathological Features, Recurrence and Response to Adjuvant Chemotherapy.

BACKGROUND: The clinico-oncological outcomes of precursor epithelial subtypes of adenocarcinoma arising from intraductal papillary mucinous neoplasms (A-IPMN) are limited to small cohort studies. Differences in recurrence patterns and response to adjuvant chemotherapy between A-IPMN subtypes are unknown. METHODS: Clincopathological features, recurrence patterns and long-term outcomes of patients undergoing pancreatic resection (2010-2020) for A-IPMN were reported from 18 academic pancreatic centres worldwide. Precursor epithelial subtype groups were compared using uni- and multivariate analysis. RESULTS: In total, 297 patients were included (median age, 70 years; male, 78.9%), including 54 (18.2%) gastric, 111 (37.3%) pancreatobiliary, 80 (26.9%) intestinal and 52 (17.5%) mixed subtypes. Gastric, pancreaticobiliary and mixed subtypes had comparable clinicopathological features, yet the outcomes were significantly less favourable than the intestinal subtype. The median time to recurrence in gastric, pancreatobiliary, intestinal and mixed subtypes were 32, 30, 61 and 33 months. Gastric and pancreatobiliary subtypes had worse overall recurrence (p = 0.048 and p = 0.049, respectively) compared with the intestinal subtype but gastric and pancreatobiliary subtypes had comparable outcomes. Adjuvant chemotherapy was associated with improved survival in the pancreatobiliary subtype (p = 0.049) but not gastric (p = 0.992), intestinal (p = 0.852) or mixed subtypes (p = 0.723). In multivariate survival analysis, adjuvant chemotherapy was associated with a lower likelihood of death in pancreatobiliary subtype, albeit with borderline significance [hazard ratio (HR) 0.56; 95% confidence interval (CI) 0.31-1.01; p = 0.058]. CONCLUSIONS: Gastric, pancreatobiliary and mixed subtypes have comparable recurrence and survival outcomes, which are inferior to the more indolent intestinal subtype. Pancreatobiliary subtype may respond to adjuvant chemotherapy and further research is warranted to determine the most appropriate adjuvant chemotherapy regimens for each subtype.

Influence of periapical lesion volume on the radiodensity of surrounding bone: A CBCT study.

Aim: This study assesses if the size of periapical lesions has an effect on the bone immediately peripheral to an apical lesion. Methods: Cone-beam computed tomography (CBCT) images of 271 periapical lesions were analyzed using Mimics Research™ to determine the CBCT periapical lesion volume index (CBCTPAVI) score, along with the radiodensity of the lesion, lesion border, and surrounding bone in 0.5 mm increments up to 2.0 mm peripheral to the apical lesion. The one-way analysis of variance was used to assess for significant differences in the radiodensity of the lesion, border, and peripheral bone, as well as differences among CBCTPAVI scores. Results: The radiodensity of bone peripheral to the apical lesion increased significantly up to 1.0 mm around the lesion's perimeter. In addition, lesions with higher CBCTPAVI scores showed a significantly greater difference in the radiodensity from the lesion to the lesion border and the peripheral bone, compared to lesions with smaller CBCTPAVI scores. Conclusions: This study for the first time shows the influence of periapical lesion size on the radiodensity of bone peripheral to an apical lesion. Variations in radiodensity at the perimeter of a periapical lesion can be influenced by the size of the lesion, possibly indicating differences in defense response. Knowledge of these phenomena may provide information on bone healing and enhance our understanding of bone peripheral to a periapical lesion.

Evaluation of wear resistance and surface properties of additively manufactured restorative dental materials.

OBJECTIVES: To evaluate the wear resistance of three additively manufactured dental crown materials (NextDent C&B MFH, Saremco print CROWNTEC and Bego VarseoSmile Crown) under two environmental conditions (dry and artificial saliva), two loads (49 N and 70 N) and two surface treatments (polished and glazed). METHODS: A total of 120 specimens were divided into 24 groups and tested for wear under two loads (49 N and 70 N), surface treatment (polished or glazed), and environment (dry or submerged in artificial saliva). All samples underwent reciprocating wear testing at 1 Hz using a wear simulator, replicating 48 months of In Vivo conditions with a stainless-steel ball as the antagonist. The coefficient of friction (CoF), surface roughness, volumetric and vertical wear loss were measured and statistically analysed. Confocal microscopy assessed the surface properties of crown materials and the antagonists. RESULTS: The NextDent material demonstrated the most homogenous wear, with relatively low vertical and volumetric loss across all groups (p < 0.004). NextDent and Bego materials performed similarly in artificial saliva regardless of the load type (p > 1.000). The CoF remained below 0.3 for all groups. All groups exhibited significant increases in surface roughness after testing, however, this did not correlate with an increase in the CoF. Confocal analysis revealed material deformities due to load and notable scratch marks on the stainless-steel antagonists. CONCLUSION: It was found that all investigated addtively manufactured materials can be suggested for provisional use. Both vertical loss and volumetric loss results should be included for material evaluation. CoF and surface roughness should be implemented into wear evaluation. CLINICAL SIGNIFICANCE: This study highlights the practical value of additively manufactured dental crown materials, particularly for provisional restorations. However, their extended use requires careful consideration of individual patient needs, emphasising the need for judicious clinical application evaluation.

Artificial intelligence vs. semi-automated segmentation for assessment of dental periapical lesion volume index score: A cone-beam CT study.

INTRODUCTION: Cone beam computed tomography periapical volume index (CBCTPAVI) is a categorisation tool to assess periapical lesion size in three-dimensions and predict treatment outcomes. This index was determined using a time-consuming semi-automatic segmentation technique. This study compared artificial intelligence (AI) with semi-automated segmentation to determine AI's ability to accurately determine CBCTPAVI score. METHODS: CBCTPAVI scores for 500 tooth roots were determined using both the semi-automatic segmentation technique in three-dimensional imaging analysis software (Mimics Research™) and AI (Diagnocat™). A confusion matrix was created to compare the CBCTPAVI score by the AI with the semi-automatic segmentation technique. Evaluation metrics, precision, recall, F1-score (2×precision×recallprecision+recall), and overall accuracy were determined. RESULTS: In 84.4 % (n = 422) of cases the AI classified CBCTPAVI score the same as the semi-automated technique. AI was unable to classify any lesion as index 1 or 2, due to its limitation in small volume measurement. When lesions classified as index 1 and 2 by the semi-automatic segmentation technique were excluded, the AI demonstrated levels of precision, recall and F1-score, all above 0.85, for indices 0, 3-6; and accuracy over 90 %. CONCLUSIONS: Diagnocat™ with its ability to determine CBCTPAVI score in approximately 2 min following upload of the CBCT could be an excellent and efficient tool to facilitate better monitoring and assessment of periapical lesions in everyday clinical practice and/or radiographic reporting. However, to assess three-dimensional healing of smaller lesions (with scores 1 and 2), further advancements in AI technologies are needed.

Adjuvant chemotherapy for adenocarcinoma arising from intraductal papillary mucinous neoplasia: multicentre ADENO-IPMN study.

BACKGROUND: The clinical impact of adjuvant chemotherapy after resection for adenocarcinoma arising from intraductal papillary mucinous neoplasia is unclear. The aim of this study was to identify factors related to receipt of adjuvant chemotherapy and its impact on recurrence and survival. METHODS: This was a multicentre retrospective study of patients undergoing pancreatic resection for adenocarcinoma arising from intraductal papillary mucinous neoplasia between January 2010 and December 2020 at 18 centres. Recurrence and survival outcomes for patients who did and did not receive adjuvant chemotherapy were compared using propensity score matching. RESULTS: Of 459 patients who underwent pancreatic resection, 275 (59.9%) received adjuvant chemotherapy (gemcitabine 51.3%, gemcitabine-capecitabine 21.8%, FOLFIRINOX 8.0%, other 18.9%). Median follow-up was 78 months. The overall recurrence rate was 45.5% and the median time to recurrence was 33 months. In univariable analysis in the matched cohort, adjuvant chemotherapy was not associated with reduced overall (P = 0.713), locoregional (P = 0.283) or systemic (P = 0.592) recurrence, disease-free survival (P = 0.284) or overall survival (P = 0.455). Adjuvant chemotherapy was not associated with reduced site-specific recurrence. In multivariable analysis, there was no association between adjuvant chemotherapy and overall recurrence (HR 0.89, 95% c.i. 0.57 to 1.40), disease-free survival (HR 0.86, 0.59 to 1.30) or overall survival (HR 0.77, 0.50 to 1.20). Adjuvant chemotherapy was not associated with reduced recurrence in any high-risk subgroup (for example, lymph node-positive, higher AJCC stage, poor differentiation). No particular chemotherapy regimen resulted in superior outcomes. CONCLUSION: Chemotherapy following resection of adenocarcinoma arising from intraductal papillary mucinous neoplasia does not appear to influence recurrence rates, recurrence patterns or survival.

Enhancing In Vivo Electroporation Efficiency through Hyaluronidase: Insights into Plasmid Distribution and Optimization Strategies.

Electroporation (EP) stands out as a promising non-viral plasmid delivery strategy, although achieving optimal transfection efficiency in vivo remains a challenge. A noteworthy advancement in the field of in vivo EP is the application of hyaluronidase, an enzyme with the capacity to degrade hyaluronic acid in the extracellular matrix, which thereby enhances DNA transfer efficiency by 2- to 3-fold. This paper focuses on elucidating the mechanism of hyaluronidase's impact on transfection efficiency. We demonstrate that hyaluronidase promotes a more uniform distribution of plasmid DNA (pDNA) within skeletal muscle. Additionally, our study investigates the effect of the timing of hyaluronidase pretreatment on EP efficiency by including time intervals of 0, 5, and 30 min between hyaluronidase treatment and the application of pulses. Serum levels of the pDNA-encoded transgene reveal a minimal influence of the hyaluronidase pretreatment time on the final serum protein levels following delivery in both mice and rabbit models. Leveraging bioimpedance measurements, we capture morphological changes in muscle induced by hyaluronidase treatment, which result in a varied pDNA distribution. Subsequently, these findings are employed to optimize EP electrical parameters following hyaluronidase treatment in animal models. This paper offers novel insights into the potential of hyaluronidase in enhancing the effectiveness of in vivo EP, as well as guides optimized electroporation strategies following hyaluronidase use.

Ventilation during COVID-19 in a school for students with intellectual and developmental disabilities (IDD).

BACKGROUND: This study examined the correlation of classroom ventilation (air exchanges per hour (ACH)) and exposure to CO2 ≥1,000 ppm with the incidence of SARS-CoV-2 over a 20-month period in a specialized school for students with intellectual and developmental disabilities (IDD). These students were at a higher risk of respiratory infection from SARS-CoV-2 due to challenges in tolerating mitigation measures (e.g. masking). One in-school measure proposed to help mitigate the risk of SARS-CoV-2 infection in schools is increased ventilation. METHODS: We established a community-engaged research partnership between the University of Rochester and the Mary Cariola Center school for students with IDD. Ambient CO2 levels were measured in 100 school rooms, and air changes per hour (ACH) were calculated. The number of SARS-CoV-2 cases for each room was collected over 20 months. RESULTS: 97% of rooms had an estimated ACH ≤4.0, with 7% having CO2 levels ≥2,000 ppm for up to 3 hours per school day. A statistically significant correlation was found between the time that a room had CO2 levels ≥1,000 ppm and SARS-CoV-2 PCR tests normalized to room occupancy, accounting for 43% of the variance. No statistically significant correlation was found for room ACH and per-room SARS-CoV-2 cases. Rooms with ventilation systems using MERV-13 filters had lower SARS-CoV-2-positive PCR counts. These findings led to ongoing efforts to upgrade the ventilation systems in this community-engaged research project. CONCLUSIONS: There was a statistically significant correlation between the total time of room CO2 concentrations ≥1,000 and SARS-CoV-2 cases in an IDD school. Merv-13 filters appear to decrease the incidence of SARS-CoV-2 infection. This research partnership identified areas for improving in-school ventilation.

Consistent survival in consecutive cases of life-supporting porcine kidney xenotransplantation using 10GE source pigs.

Xenotransplantation represents a possible solution to the organ shortage crisis and is an imminent clinical reality with long-term xenograft survival in pig-to-nonhuman primate (NHP) heart and kidney large animal models, and short-term success in recent human decedent and clinical studies. However, concerns remain about safe clinical translation of these results, given the inconsistency in published survival as well as key differences between preclinical procurement and immunosuppression and clinical standards-of-care. Notably, no studies of solid organ pig-to-NHP transplantation have achieved xenograft survival longer than one month without CD40/CD154 costimulatory blockade, which is not currently an FDA-approved immunosuppression strategy. We now present consistent survival in consecutive cases of pig-to-NHP kidney xenotransplantation, including long-term survival after >3 hours of xenograft cold preservation time as well as long-term survival using FDA-approved immunosuppression. These data provide critical supporting evidence for the safety and feasibility of clinical kidney xenotransplantation. Moreover, long-term survival without CD40/CD154 costimulatory blockade may provide important insights for immunosuppression regimens to be considered for first-in-human clinical trials.

Factors influencing the bond strength of additively manufactured crown materials in dentistry: A systematic review of in vitro studies.

OBJECTIVE: The purpose of this systematic review was to investigate how different interventions can impact the bond strength of additively manufactured crown materials after cementation. DATA/SOURCES: Four online databases Ovid MEDLINE, Scopus, Web of Science and Google Scholar were searched up to January 2023. Inclusion criteria were English-language publications, full-text, and in vitro studies only. Exclusion criteria were studies that did not assess the bonding of an additively manufactured crown material to cement or did not conduct any bond strength tests. An assessment of risk of bias was done in accordance with a modified Consolidated Standards of Reporting Trials (CONSORT) checklist. Each study was analysed and compared based on the interventions and bond strength results. STUDY SELECTION: Six studies satisfied the inclusion and exclusion criteria, five of which evaluated photopolymerised resin and one that tested zirconia manufacturing via 3D printing. All studies observed a low risk of bias. The interventions applied included the type of surface pretreatments, airborne-particle abrasion pressure, cement type, taper of crown, and artificial aging. Three studies compared the bonding performance to milled materials. CONCLUSIONS: The bond strength of crown materials additively manufactured from photopolymers presented high values and are comparable to milled materials. The systematic review demonstrated there was no definite superior cement type, but airborne-particle abrasion with alumina was generally recommended. There is a clear gap in the literature regarding the bond strength of additively manufactured crowns. Therefore, further research is necessary to evaluate its clinical applicability for permanent restorations. CLINICAL SIGNIFICANCE: Factors influencing the bond strength of additively manufactured crown materials should be evaluated so dental professionals can adopt procedures that promote the strongest bond.

Assessment of the trueness of additively manufactured mol3% zirconia crowns at different printing orientations with an industrial and desktop 3D printer compared to subtractive manufacturing.

OBJECTIVES: This study endeavours to investigate the effect of printing orientation on the trueness of additively manufactured molar zirconia crowns. The areal surface roughness and the characteristics of the marginal regions of the crowns were also considered. METHODS: Twelve molar crowns were manufactured at 0°, 45°, and, 90° printing orientations in a Lithoz and AON zirconia printer, respectively. Twelve milled crowns were used as a comparison. Samples were scanned and analysed in metrology software to determine the trueness of the groups. Regions of interest were defined as the margins, intaglio surface and contact points. Areal surface roughness and print layer thickness were further analysed using a confocal laser scanning microscope. RESULTS: The results indicate that there are clear differences between the investigated desktop (AON) and industrial (Lithoz) 3D printer. The 45° Lithoz group is the only sample group showing no significantly different results in trueness for all regions analysed compared to the milled group. Areal surface roughness analysis indicates that the print layers in the marginal regions are within clinically tolerable limits and surface characteristics. CONCLUSIONS: The printing orientation for zirconia crowns is critical to trueness, and differences are evident between different AM apparatuses. Considerations for design and orientation between different apparatuses should therefore be considered when utilising direct additive manufacturing processes. The areal surface roughness of the marginal regions is within acceptable clinical limits for all manufacturing processes and print orientations considered. CLINICAL SIGNIFICANCE: The materials and apparatuses for additive manufacturing of zirconia crowns are now clinically acceptable from the perspective of the trueness of a final crown for critical functional surfaces and areal surface roughness of the marginal regions.

Evidence for molecular subtyping in pancreatic ductal adenocarcinoma: a systematic review.

BACKGROUND: Pancreatic Ductal Adenocarcinoma (PDAC) patients exhibit varied responses to multimodal therapy. RNA gene sequencing has unravelled distinct tumour biology subtypes, forming the focus of this review exploring its impact on survival outcomes. METHODS: A systematic search across PubMed, Medline, Embase, and CINAHL databases targeted studies assessing long-term overall and disease-free survival in PDAC patients with molecular subtyping. RESULTS: Fifteen studies including 2731 patients were identified. Molecular subtyping was performed by RNA sequencing and Immunohistochemistry in 14 studies and by Mass Spectrometry in 1 study. Two main tumour subtypes were identified (classical and basal-like or squamous) with basal like associated with poorer outcomes. Further subtypes were identified in individual studies. Superior survival was seen with classical subtype in all other analyses that compared the classical and basal subtypes. High risk stromal subtypes were identified on further analysis of the stroma and were associated with a worse survival independent of the tumour subtype. CONCLUSION: Molecular subtyping of PDAC specimens can identify patients with high-risk tumour biology and poor survival outcomes. Routine subtyping is limited by the cost of RNA sequencing and the volume of raw data generated which has made its translation into routine clinical practice difficult.

Prolonged post-washing in ethanol decreases bond strength of additively manufactured crown materials.

OBJECTIVES: This study aimed to investigate the effect of post-washing duration and crown thickness on the bond strength between additively manufactured crown materials and dental cement in vitro. METHODS: Rectangular-shaped specimens of two thicknesses (1.5 and 2.0 mm) were additively manufactured from permanent VarseoSmile Crown (VC) and long-term temporary NextDent (ND) materials. The specimens were post-washed (n = 160) in ethanol for 5 min, 10 min, 1 h, and 8 h then cemented with dual-cure resin cement. Twenty PMMA (TC) were milled as a control. A chevron-notch test was performed to measure the maximum load until failure (N). Interfacial bond strength (J/m2) was calculated and statistically analysed. The mode of failure was analysed by scanning electron microscopy (SEM). RESULTS: There was a significant difference in the bond strength between all groups (p < 0.01). VC at 1.5mm thickness post-washed for 10 min showed the highest mean bond strength (1.77 ±0.96 J/m2) while VC at 2.0mm thickness post-washed for 8 h showed the lowest (0.22 ±0.10 J/m2). Exposure to ethanol for 8 h resulted in lower bond strength. Within the type of material, there were no differences in bond strength between the thicknesses when post-washed for the same duration. CONCLUSIONS: Prolonged post-washing of AM crown materials can significantly decrease the bond strength to resin cement. There were no differences between the permanent and long-term temporary AM materials. When post-washed for 5 min, AM materials observed comparable or higher bond strength values compared to PMMA. CLINICAL SIGNIFICANCE: The output of this research serves as a guide for dental practitioners, emphasising the importance of adhering to correct post-washing procedures for optimal bond strength of additively manufactured crown materials.

Draft whole-genome sequences of three Borrelia burgdorferi isolates from Western Canada.

Whole-genome sequences are presented for three Borrelia burgdorferi, a causative agent of Lyme disease in North America, isolated from Ixodes pacificus ticks collected in British Columbia, Canada. Shotgun DNA libraries were prepared with Illumina DNA Prep and sequenced using the MiniSeq platform. Genome assemblies enabled multilocus sequence typing and ospC typing.

Managing your human capital in a department of surgery.

Human capital management in the department of surgery represents a heterogeneous array of operational and strategic activities that focus on enhancing the well-being and productivity of all team members. This is not an episodic or reactive effort but rather a constant one that occurs in an ongoing cycle. Awareness of all the human capital in one's department, tending to members with their own best interest in mind, and an approach that is communication-heavy and based on fairness and transparency will serve to elevate the productivity and wellness of the department of surgery members and the organization as a whole.