Non-Blinking Luminescence from Charged Single Graphene Quantum Dots.

Photoluminescence blinking behavior from single quantum dots under steady illumination is an important but controversial topic. Its occurrence has impeded the use of single quantum dots in bioimaging. Different mechanisms have been proposed to account for it, although controversial, the most important of which is the non-radiative Auger recombination mechanism whereby photocharging of quantum dots can lead to the blinking phenomenon. Here, the singly charged trion, which maintains photon emission, including radiative recombination and non-radiative Auger recombination, leads to fluorescence non-blinking which is observed in photocharged single graphene quantum dots (GQDs). This phenomenon can be explained in terms of different energy levels in the GQDs, caused by various oxygen-containing functional groups in the single GQDs. The suppressed blinking is due to the filling of trap sites owing to a Coulomb blockade. These results provide a profound understanding of the special optical properties of GQDs, affording a reference for further in-depth research.

Alcohol imination catalyzed by carbon nanostructures synthesized by C(sp2)-C(sp3) free radical coupling.

Imines are important intermediates for synthesizing various fine chemicals, with the disadvantage of requiring the use of expensive metal-containing catalysts. We report that the dehydrogenative cross-coupling of phenylmethanol and benzylamine (or aniline) directly forms the corresponding imine with a yield of up to 98%, and water as the sole by-product, in the presence of a stoichiometric base, using carbon nanostructures as the "green" metal-free carbon catalysts with high spin concentrations, which is synthesized by C(sp2)-C(sp3) free radical coupling reactions. The catalytic mechanism is attributed to the unpaired electrons of carbon catalysts to reduce O2 to O2·-, which triggers the oxidative coupling reaction to form imines, whereas the holes in the carbon catalysts receive electrons from the amine to restore the spin states. This is supported by density functional theory calculations. This work will open up an avenue for synthesizing carbon catalysts and offer great potential for industrial applications.

Electron Spin Catalysis with Graphene Belts.

Here, we report kinetic studies using electron spin resonance spectroscopy on spin catalysis reactions caused by using graphene belts which were synthesized by a radical coupling method. The results show that σ-type free radical species provide the dominant sites for catalytic activity through the spin-spin interaction, although there are some other influencing factors. The spin catalysis mechanism can be applied both in the oxygen reduction reaction (ORR) and in organic synthesis. The graphene belt spin catalyst shows excellent performance with a high ORR half-wave potential of 0.81 V and long-term stability with almost no loss of activity after 50 000 cycles in alkaline media. It also shows excellent performance in a benzylamine coupling with molecular oxygen to generate the corresponding imine at an average conversion of ≈97.7 % and an average yield of ≈97.9 %. This work opens up a new research direction for understanding aerobic processes in the field of spin catalysis.

Natural Antioxidants, Tyrosinase and Acetylcholinesterase Inhibitors from Cercis glabra Leaves.

Cercis glabra is a plant belonging to the legume family, whose flowers and barks are commonly used as food and traditional Chinese medicines. However, its leaves are usually disposed of as wastes. This research comprehensively investigated the bioactive constituents of C. glabra leaves, and two new phenolic, ceroffesters A-B (1-2) and thirteen known compounds (3-15) were isolated. Their structures were elucidated by spectroscopic methods such as nuclear magnetic resonance (1D NMR and 2D NMR), high-resolution electrospray ionization mass spectra (HR-ESI-MS), optical rotatory dispersion (ORD) and electronic circular dichroism (ECD). All of them were assessed for their antioxidant activities through ABTS, DPPH and PTIO methodologies, and evaluated for inhibitory activities against two enzymes (mushroom tyrosinase and acetylcholinesterase). As a result, compounds 3-6, 10 and 13 exhibited evident antioxidant activities. Meanwhile, compounds 5, 10 and 13 showed the most potent tyrosinase inhibitory activities, with IC50 of 0.64, 0.65 and 0.59 mM, and compared with the positive control of 0.63 mM (kojic acid). In the initial concentration of 1 mg/mL, compounds 3, 5 and 6 demonstrated moderate inhibitory activities against acetylcholinesterase with 85.27 ± 0.06%, 83.65 ± 0.48% and 82.21 ± 0.09%, respectively, compared with the positive control of 91.17 ± 0.23% (donepezil). These bioactive components could be promising antioxidants, tyrosinase and acetylcholinesterase inhibitors.

Ultratough Hydrogen-Bond-Bridged Phosphorene Films.

The rapid development of flexible electronic devices, especially based on 2D materials, has triggered the demand for high-strength materials. Mono- or few-layer phosphorene with excellent electronic properties has attracted extensive attention. However, phosphorene is affected by its low Young's modulus when applied to flexible electronic devices. Here, a strategy via ion intercalation to significantly improve the mechanical properties of black phosphorus to generate hydrogen-bond-bridged phosphorene films with Young's modulus as high as 316 GPa is reported. This value is several times larger than the theoretical values of 166 GPa in the zigzag direction, 44 GPa in the armchair direction, and the averaged Young's modulus among all directions of 94 GPa. The impact of intercalation on mechanical properties is also explored. Experimental nanoindentation results obtained by atomic force microscopy indicate that the relationship between the ratio of intercalated ions to phosphorus atoms and the corresponding Young's modulus satisfies the formula E = e a e - [ ln ( x ) + b ] 2 c ( 0 < x ≤ 1.80 ) \[E{\bm{ = }}{e^{a{e^{\frac{{{\bm{ - }}{{[\ln (x){\bm{ + }}b]}^2}}}{c}}}}}(0{\bm{ < }}x{\bm{ \le }}1.80)\] . Furthermore, a flexible NO2 gas sensor device based on this ultratough material presents excellent performance, even after 10 000 bending cycles. The results provide new insight into the potential for practical applications of black phosphorus devices.

Wood-Derived Monolithic Catalysts with the Ability of Activating Water Molecules for Oxygen Electrocatalysis.

Oxygen reduction reaction (ORR) is the key reaction on cathode of rechargeable zinc-air batteries (ZABs). However, the lack of protons in alkaline conditions limits the rate of ORR. Herein, an activating water strategy is proposed to promote oxygen electrocatalytic activity by enhancing the proton production from water dissociation. FeP nanoparticles (NPs) are coupled on N-doped wood-derived catalytically active carbon (FeP-NWCC) to associate bifunctional active sites. In alkaline, FeP-NWCC possesses outstanding catalytic activities toward ORR (E1/2  = 0.86 V) and Oxygen evolution reaction (OER) (overpotential is 310 mV at 10 mA cm-2 ). The liquid ZABs assembled by FeP-NWCC deliver superior peak power density (144 mW cm-2 ) and cycle stability (over 450 h). The quasi-solid-state ZABs based on FeP-NWCC also display excellent performances. Theoretical calculation illustrates that the superb bifunctional performance of FeP-NWCC results from the elevated dissociation efficiency of water via FeP NPs to assist the oxygen catalytic process. The strategy of activating water provides a new perspective for the design of ORR/OER bifunctional catalysts. This work is a model for the application of forest biomass.

Engineering Bimodal Oxygen Vacancies and Pt to Boost the Activity Toward Water Dissociation.

Water dissociation is the rate-limiting step of several energy-related reactions due to the high energy barrier required for breaking the oxygen-hydrogen bond. In this work, a bimodal oxygen vacancy (VO ) catalysis strategy is adopted to boost the efficient water dissociation on Pt nanoparticles. The single facet-exposed TiO2 surface and NiOx nanocluster possess two modes of VO different from each other. In ammonia borane hydrolysis, the highest catalytic activity among Pt-based materials is achieved with the turnover frequency of 618 min-1 under alkaline-free conditions at 298 K. Theoretical simulation and characterization analyses reveal that the bimodal VO significantly promotes the water dissociation in two ways. First, an ensemble-inducing effect of Pt and VO in TiO2 drives the activation of water molecules. Second, an electron promoter effect induced by the electron transfer from VO in NiOx to Pt further enhances the ability of Pt to dissociate water and ammonia borane. This insight into bimodal VO catalysis establishes a new avenue to rationally design heterogeneous catalytic materials in the energy chemistry field.

Advances and Prospects in Metal-Organic Frameworks as Key Nexus for Chemocatalytic Hydrogen Production.

Hydrogen is a clean and sustainable energy carrier, which is considered a promising alternative for fossil fuels to solve the global energy crisis and respond to climate change. Social concerns on its safe storage promote continuous exploration of alternatives to traditional storage methods. In this case, chemical hydrogen storage materials initiate plentiful research with special attention to the design of heterogeneous catalysts that can enhance efficient and highly selective hydrogen production. Metal-organic frameworks (MOFs), a kind of unique crystalline porous materials featuring highly ordered porosities and tailorable structures, can provide various active sites (i.e., metal nodes, functional linkers, and defects) for heterogeneous catalysis. Furthermore, the easy construction of active sites in highly ordered MOFs, which can work as plate for the delicate active site engineering, make them ideal candidates for a variety of heterogeneous catalysts including chemocatalytic hydrogen production. This review concentrates on the application of MOFs as heterogeneous catalysts or catalyst supports in chemocatalytic hydrogen production. Recent progresses of MOFs as catalysts for chemocatalytic hydrogen production are comprehensively summarized. The research methods, mechanism analyses, and prospects of MOFs in this field are discussed. The challenges in future industrial applications of MOFs as catalysts for hydrogen production are proposed.

LiMnO2@rGO nanocomposites for high-performance lithium-ion battery cathodes.

Composites of reduced graphene oxide (rGO) and layered LiMnO2 (LiMnO2@rGO) were successfully synthesized and demonstrated via a one-pot hydrothermal route at a temperature of 200 °C for 12 h. The obtained LiMnO2@rGO was characterized by x-ray diffraction, transmission electron microscopy, Fourier transform infrared spectra and Raman spectra. Electrochemical performance tests of LiMnO2@rGO and LiMnO2 cathodes exhibited that after graphene oxide was loaded, the discharge capacity and cycling performance were greatly improved, the maximum discharge capacity reached 185.6 mAh g-1 at the current density of 100 mA g-1 with retention capacity higher than 80% even after 100 cycles between 2 and 4.5 V vs. Li+/Li, which is much better than most previous reports (table S1). The principles of the corresponding phenomenon were fully explained by the low electron conductivity, high structural stability and lithium diffusion coefficient of LiMnO2@rGO, which was also proved by cyclic voltammetry testing, electrochemical impedance spectroscopy and relevant equivalent circuit fitting. This work not only provides significant insights into the relationship between the structure and electrochemical performance of electrodes, but also shows the great potential of LiMnO2@rGO composite electrodes applied as the cathode materials of lithium-ion batteries.

Unzipping of black phosphorus to form zigzag-phosphorene nanobelts.

Phosphorene, monolayer or few-layer black phosphorus, exhibits fascinating anisotropic properties and shows interesting semiconducting behavior. The synthesis of phosphorene nanosheets is still a hot topic, including the shaping of its two-dimensional structure into nanoribbons or nanobelts. Here we report electrochemical unzipping of single crystalline black phosphorus into zigzag-phosphorene nanobelts, as well as nanosheets and quantum dots, via an oxygen-driven mechanism. The experimental results agree well with our theoretical calculations. The calculation for the unzipping mechanism study suggests that interstitial oxygen-pairs are the critical intermediate species for generating zigzag-phosphorene nanobelts. Although phosphorene oxidation has been reported, lengthwise cutting is hitherto unreported. Our discovery of phosphorene cut upon oxidation represents a previously unknown mechanism for the formation of various dimensions of phosphorene nanostructures, especially zigzag-phosphorene nanobelts. It opens up a way for studying the quantum effects and electronic properties of zigzag-phosphorene nanobelts.

Synthesis of Sub-nanometer Porous Carbon Film for Energy Storage.

Carbon-based supercapacitors are a kind of supercapacitors with very promising applications because of their low cost, good stability and adjustable properties. Simple and rapid syntheses of carbon materials with a high surface area and narrow pore size distribution are of great significance to practical applications of carbon-based supercapacitors. Here we report a new strategy to synthesize sub-nanometer porous carbon films (Snp-CF) via a condensation reaction under mild conditions. Carbon films exhibit a narrow pore size distribution (6.6 Å) and high surface area (508 m2 g-1 ) after annealing at 700 °C. Snp-CF-700 displays a good specific capacity and excellent cycle performance (130 F g-1 after 5000 cycles, 118 % of initial 110 F g-1 ).

Thickness-dependent Young's modulus of polycrystalline α-PbO nanosheets.

Litharge, in two dimensional (2D) nanostructure form, has recently ignited considerable theoretical interest due to its excellent photoelectric and magnetic properties. However, the lack of an efficient synthesis method hinders its development. Here, we provide an interfacial solvothermal strategy for controllably synthesizing ultrathin hexagonal polycrystalline α-PbO nanosheets in micrometer scale. This strategy can also be utilized for the synthesis of other 2D materials. Experimental atomic force microscope nanoindentation measurements reveal the relationship between the thickness of polycrystalline α-PbO nanosheets and the corresponding Young's modulus, expressed as E = E0 + Kt -1. First-principles calculation supports the result and ascribes the cause to interlayer sliding from particular weak interlayer interactions. Additionally, the enhanced mechanical strength of the polycrystalline structure compared to its single-crystal counterpart is attributed to the alternate arrangement of grain-boundaries effects. The summative formula may be extended to other 2D materials with weak interlayer interactions, which has the potential to provide guidance for constructing flexible devices.

Pt nanoparticles decorated rose-like Bi2O2CO3 configurations for efficient photocatalytic removal of water organic pollutants.

Pt nanoparticles decorated with rose-like Bi2O2CO3 configurations were synthesized via a simple photoreduction method at room temperature. The structure, morphology, optical and electronic properties, and photocatalytic performance of the as-prepared materials were characterized. Compared to pure Bi2O2CO3, the Pt/Bi2O2CO3 photocatalysts show better performance in decomposing RhB, BPA and OTC under visible light (λ > 420 nm). The enhanced photocatalytic activity of Pt/Bi2O2CO3 could be attributed to the modification in light absorption (λ > 420 nm) charge migration and the separation of photo-generated electrons (e-) and holes (h+). Free radical trapping experiments demonstrated that the main active species of the catalytic reaction are different in decomposing RhB and BPA.

Structural Evolution of Co-Based Metal Organic Frameworks in Pyrolysis for Synthesis of Core-Shells on Nanosheets: Co@CoOx@Carbon-rGO Composites for Enhanced Hydrogen Generation Activity.

In this article, Co-based metal organic frameworks (MOFs) with two shapes were used as pyrolysis precursor to synthesize multilayer core-shells composites loaded on reduced graphene oxide (rGO) sheets. The core-shell structures were obtained by the formation of cores from metal ions and carbon shells from carbonization of ligands. Controllable oxidation of Co cores to CoOx shells generated multilayer core-shell structures anchored onto the surface of rGO sheets. The N-doped composites were obtained by adding poly vinylpyrrolidone. The multilayer core-shells composites exhibited superior catalytic activity toward hydrogen generation compared to their single layer counterparts. By using the N-doped multilayer composites, high hydrogen generation specific rate of 5560 mL min(-1) gCo(-1) was achieved at room temperature. The rGO sheets in composites improved their structure stability. These catalysts exhibited high stability after used five cycling. This synergistic strategy proposes simple, efficient, and versatile blue-prints for the fabrication of rGO composites from MOFs-based precursors.

Space-confined creation of nanoframes in situ on reduced graphene oxide.

Nanoframes (NFs) are created in situ on reduced graphene oxide (rGO) through confining the evolutions of precursor nanosheets, such as ZnS(EN)0.5 (EN = ethylenediamine), and nanoparticles within quasi-two-dimensional spaces generated from graphene oxide. The resultant composites of ZnS-NF@rGO exhibit excellent photocurrent responses. This work provides a new strategy to synthesize and modulate nanostructures and nanomaterials for rGO composites.

Hydrothermal fabrication of MnCO3@rGO composite as an anode material for high-performance lithium ion batteries.

The layer structure of graphene or reduced graphene oxide (rGO) opens an avenue for the development of advanced functional materials. In this paper, a MnCO3@rGO composite (MGC) was fabricated by anchoring MnCO3 nanoparticles (NPs) on rGO sheets in the hydrothermal reduction process of graphene oxide by using NaBH4. MnCO3 NPs with an average diameter of 8-20 nm were anchored onto the surface of rGO. The layer structure of rGO was maintained in MGC. The MGC was employed as an anode active material for lithium ion batteries. Excellent performances were obtained with a high specific capacity up to 857 mA·h·g(-1) after 100 cycles. The various charging-discharging current rates of 0.2-5.0 C exhibited no clear negative effect on the recycling stability of the MGC. The enhanced structure stability and ion and electron conductivity of the MGC are responsible for the superior electrochemical properties.

Enhanced anode performances of polyaniline-TiO2-reduced graphene oxide nanocomposites for lithium ion batteries.

Here, we report a three-layer-structured hybrid nanostructure consisting of transition metal oxide TiO(2) nanoparticles sandwiched between carbonaceous polymer polyaniline (PANI) and graphene nanosheets (termed as PTG), which, by simultaneously hindering the agglomeration of TiO(2) nanoparticles and enhancing the conductivity of PTG electrode, enables fast discharge and charge. It was demonstrated that the PTG exhibited improved electrochemical performance compared to pure TiO(2). As a result, PTG nanocomposite is a promising anode material for highly efficient lithium ion batteries (LIBs) with fast charge/discharge rate and high enhanced cycling performance [discharge capacity of 149.8 mAh/g accompanying Coulombic efficiency of 99.19% at a current density of 5C (1000 mA/g) after 100 cycles] compared to pure TiO(2). We can conclude that the concept of applying three-layer-structured graphene-based nanocomposite to electrode in LIBs may open a new area of research for the development of practical transition-metal oxide graphene-based electrodes which will be important to the progress of the LIBs science and technology.

Synthesis and photocatalytic activity of single-crystalline hollow rh-In2O3 nanocrystals.

We report here for the first time the hollow, metastable, single-crystal, rhombohedral In(2)O(3) (rh-In(2)O(3)) nanocrystals synthesized by annealing solvothermally prepared InOOH solid nanocrystals under ambient pressure at 400 °C, through a mechanism of the Kirkendall effect, in which pore formation is attributed to the difference in diffusion rates of anions (OH(-) and O(2-)) in a diffusion couple. The InOOH solid nanocrystals were prepared via a controlled hydrolysis solvothermal route by using In(NO(3))(3)·4.5H(2)O as a starting material and glycerol-ethanol as a mixed solvent. The glycerol-ethanol mixed solvent plays a key role on the formation of the intermediate InOOH, thus the final product of rh-In(2)O(3). The as-synthesized In(2)O(3) nanocrystals present excellent photocatalytic degradation of rhodamine B (RhB) and methylene blue (MB) dyes, which present ∼92% degradation of RhB or MB after 4 or 3 h reaction in the presence of the as-synthesized In(2)O(3) nanocrystals, respectively.

Synthesis of adenine-modified reduced graphene oxide nanosheets.

We report here a facile strategy to synthesize the nanocomposite of adenine-modified reduced graphene oxide (AMG) via reaction between adenine and GOCl which is generated from SOCl(2) reacted with graphite oxide (GO). The as-synthesized AMG was characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), UV-vis absorption spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and galvanostatic discharge analysis. The AMG owns about one adenine group per 53 carbon atoms on a graphene sheet, which improves electronic conductivity compared with reduced graphene oxide (RGO). The AMG displays enhanced supercapacitor performance compared with RGO accompanying good stability and good cycling behavior in the supercapacitor.

Enhanced anode performances of the Fe3O4-carbon-rGO three dimensional composite in lithium ion batteries.

A three dimensional composite was constructed by anchoring Fe(3)O(4) nanoparticles encapsulated within carbon shells onto reduced graphene oxide sheets, which exhibited enhanced anode performances in lithium ion batteries with a specific capacity of 842.7 mAh g(-1) and superior recycle stability after 100 cycles.