ABSTRACT
In the present paper, the mesophilic (35 °C) and thermophilic (55 °C) biomethanization of poultry and cattle manures were investigated using biochemical methane potential (BMP) tests. Specific methane production (SMP), 24 pharmaceutical compounds (PhACs), and five antibiotic resistance genes (ARGs) (blaKPC, ermB, qnrS, sul1 and tetW) together with the microbial community were analyzed. Mesophilic BMP tests resulted in the highest SMP when poultry manure was used (285.5 mL CH4/g VSS with poultry vs 239.6 mL CH4/g VSS with cattle manure) while thermophilic temperatures led to the highest SMP with cattle manure (231.2 mL CH4/g VSS with poultry vs 238.0 mL CH4/g VSS with cattle manure). Higher removals of veterinary pharmaceuticals were detected at 55 °C with both manures indicating that thermophilic digestion is better suited for the removal of these compounds. Tylosin, tilmicosin, chlortetracycline, and sulfamethoxazole presented removals higher than 50%, being the first two completely removed under mesophilic and thermophilic conditions. When comparing the relative abundance of ARGs at the end of each treatment, the most significant removal was found for qnrS which was not detected after the anaerobic treatment. The remaining ARGs did not suffer significant changes. Finally, microbial composition analysis showed that temperature affected the final microbial population more than the microorganisms present in the substrate or inoculum.
Subject(s)
Manure , Veterinary Drugs , Anaerobiosis , Animals , Anti-Bacterial Agents/pharmacology , Cattle , Drug Resistance, Microbial/genetics , Manure/analysis , PoultryABSTRACT
Manganese-Aluminum powders were recently reported to show high efficiency and fast reaction rates as decolorization materials for azo-dye aqueous solutions. This work presents a detailed study of different aspects of this material. Firstly, the influence of the crystalline phase and the microstructure was studied by comparing the efficiency of powders obtained by different production protocols. Secondly, the decolorization efficiency was investigated on various types of dyes, including real textile wastewater samples. The analysis of the treated water and the particles showed that the main reaction mechanism was the breaking of the azo-dye molecules, although important adsorption on the metallic surface was observed for some colorants. Finally, the reusability of the particles and the reduction of toxicity achieved during the treatments were assessed. The simple production and application methods, the high efficiency and the use of environmentally friendly metallic elements are the main advantages of Manganese-Aluminum powders compared to other high-efficient decolorizing metallic materials.
Subject(s)
Water Pollutants, Chemical , Azo Compounds , Coloring Agents , Powders , WastewaterABSTRACT
An anaerobic stable mixed culture dominated by bacteria belonging to the genera Dehalobacterium, Acetobacterium, Desulfovibrio, and Wolinella was used as a model to study the microbial interactions during DCM degradation. Physiological studies indicated that DCM was degraded in this mixed culture at least in a three-step process: i) fermentation of DCM to acetate and formate, ii) formate oxidation to CO2 and H2, and iii) H2/CO2 reductive acetogenesis. The 16S rRNA gene sequencing of cultures enriched with formate or H2 showed that Desulfovibrio was the dominant population followed by Acetobacterium, but sequences representing Dehalobacterium were only present in cultures amended with DCM. Nuclear magnetic resonance analyses confirmed that acetate produced from 13C-labelled DCM was marked at the methyl ([2-13C]acetate), carboxyl ([1-13C]acetate), and both ([1,2-13C]acetate) positions, which is in accordance to acetate formed by both direct DCM fermentation and H2/CO2 acetogenesis. The inhibitory effect of ten different co-contaminants frequently detected in groundwaters on DCM degradation was also investigated. Complete inhibition of DCM degradation was observed when chloroform, perfluorooctanesulfonic acid, and diuron were added at 838, 400, and 107⯵M, respectively. However, the inhibited cultures recovered the DCM degradation capability when transferred to fresh medium without co-contaminants. Findings derived from this work are of significant relevance to provide a better understanding of the synergistic interactions among bacteria to accomplish DCM degradation as well as to predict the effect of co-contaminants during anaerobic DCM bioremediation in groundwater.