ABSTRACT
Red, green, and blue light InxGa1-xN multiple quantum wells have been grown on GaN/γ-LiAlO2 microdisk substrates by plasma-assisted molecular beam epitaxy. We established a mechanism to optimize the self-assembly growth with ball-stick model for InxGa1-xN multiple quantum well microdisks by bottom-up nanotechnology. We showed that three different red, green, and blue lighting micro-LEDs can be made of one single material (InxGa1-xN) solely by tuning the indium content. We also demonstrated that one can fabricate a beautiful InxGa1-xN-QW microdisk by choosing an appropriate buffer layer for optoelectronic applications.
ABSTRACT
This study reports a simplified method to grow CuAlO2 crystals of submillimeter sizes with a highly anisotropic shape of a platelet. The solid-state reaction of forming CuAlO2 at ca. 1373 K in the first stage of the conventional flux method is no longer required. The CuAlO2 platelets nucleated directly onto the (0001)sapphire surface in a melt of Cu2O saturated with Al2O3 at 1473 K. The excess flux was mostly removed by the capped alumina plate on cooling with a limited amount of residue which can be leached afterward. The CuAlO2 platelets all have a 3R crystal structure with no line and planar defects observed by TEM. The CuAlO2 crystals emit a luminescence at 3.49 eV associated with resonant Raman effect resulted from a band-to-band transition in room-temperature PL measurement. The facile fabrication method for growing highly anisotropic CuAlO2 crystals paves the way for their practical application in photoelectrochemical devices.
ABSTRACT
Objective.Together with novel photodetector technologies and emerging electronic front-end designs, scintillator material research is one of the key aspects to obtain ultra-fast timing in time-of-flight positron emission tomography (TOF-PET). In the late 1990s, Cerium-doped lutetium-yttrium oxyorthosilicate (LYSO:Ce) has been established as the state-of-the-art PET scintillator due to its fast decay time, high light yield and high stopping power. It has been shown that co-doping with divalent ions, such as Ca2+and Mg2+, is beneficial for its scintillation characteristics and timing performance. Therefore, this work aims to identify a fast scintillation material to combine it with novel photosensor technologies to push the state of the art in TOF-PET.Approach.This study evaluates commercially available LYSO:Ce,Ca and LYSO:Ce,Mg samples manufactured by Taiwan Applied Crystal Co., LTD regarding their rise and decay times as well as their coincidence time resolution (CTR) with both ultra-fast high-frequency (HF) readout and commercially available readout electronics, i.e. the TOFPET2 ASIC.Main results.The co-doped samples exhibit state-of-the-art rise times of on average 60 ps and effective decay times of on average 35 ns. Using the latest technological improvements made on NUV-MT SiPMs by Fondazione Bruno Kessler and Broadcom Inc., a 3 × 3 × 19 mm3LYSO:Ce,Ca crystal achieves a CTR of 95 ps (FWHM) with ultra-fast HF readout and 157 ps (FWHM) with the system-applicable TOFPET2 ASIC. Evaluating the timing limits of the scintillation material, we even show a CTR of 56 ps (FWHM) for small 2 × 2 × 3 mm3pixels. A complete overview of the timing performance obtained with different coatings (Teflon, BaSO4) and different crystal sizes coupled to standard Broadcom AFBR-S4N33C013 SiPMs will be presented and discussed.Significance.This work thoroughly evaluates commercially available co-doped LYSO:Ce crystals and, in combination with novel NUV-MT SiPMs, shows a TOF performance that significantly exceeds the current state of the art.
Subject(s)
Positron-Emission Tomography , Scintillation Counting , Photons , Positron-Emission Tomography/methods , Scintillation Counting/methods , Silicates/chemistryABSTRACT
The magnetization measurement was performed in the Bi0.3Sb1.7Te3 single crystal. The magnetic susceptibility revealed a paramagnetic peak independent of the experimental temperature variation. It is speculated to be originated from the free-aligned spin texture at the Dirac point. The ARPES reveals that the Fermi level lies below the Dirac point. The Fermi wavevector extracted from the de Haas-van Alphen oscillation is consistent with the energy dispersion in the ARPES. Our experimental results support that the observed paramagnetic peak in the susceptibility curve does not originate from the free-aligned spin texture at the Dirac point.
ABSTRACT
The development of modern cutting-edge technology relies heavily on the huge success and advancement of nanotechnology, in which nanomaterials and nanostructures provide the indispensable material cornerstone. Owing to their nanoscale dimensions with possible quantum limit, nanomaterials and nanostructures possess a high surface-to-volume ratio, rich surface/interface effects, and distinct physical and chemical properties compared with their bulk counterparts, leading to the remarkably expanded horizons of their applications. Depending on their degree of spatial quantization, low-dimensional nanomaterials are generally categorized into nanoparticles (0D); nanorods, nanowires, and nanobelts (1D); and atomically thin layered materials (2D). This review article provides a comprehensive guide to low-dimensional nanomaterials and nanostructures. It begins with the classification of nanomaterials, followed by an inclusive account of nanofabrication and characterization. Both top-down and bottom-up fabrication approaches are discussed in detail. Next, various significant applications of low-dimensional nanomaterials are discussed, such as photonics, sensors, catalysis, energy storage, diverse coatings, and various bioapplications. This article would serve as a quick and facile guide for scientists and engineers working in the field of nanotechnology and nanomaterials.
ABSTRACT
The magnetic susceptibility reveals a discontinuity at Néel temperature and a hysteresis loop with low coercive field was observed below Néel temperature. The magnetic susceptibility of zero field cool and field cool processes coincide at a temperature above the discontinuity, and they split at temperature blow the discontinuity. The magnetic susceptibility splitting is larger at lower external magnetic fields. No more magnetic susceptibility splitting was observed at a magnetic field above 7000 Oe which is consistent with the magnetic anisotropy energy. Our study supports that these magnetic susceptibility characteristics originate from an antiferromagnetic order accompanied by weak ferromagnetism.
ABSTRACT
Antimonene is a promising two-dimensional (2D) material that is calculated to have a significant fundamental bandgap usable for advanced applications such as field-effect transistors, photoelectric devices, and the quantum-spin Hall (QSH) state. Herein, we demonstrate a phenomenon termed topological proximity effect, which occurs between a 2D material and a three-dimensional (3D) topological insulator (TI). We provide strong evidence derived from hydrogen etching on Sb2Te3 that large-area and well-ordered antimonene presents a 2D topological state. Delicate analysis with a scanning tunneling microscope of the evolutionary intermediates reveals that hydrogen etching on Sb2Te3 resulted in the formation of a large area of antimonene with a buckled structure. A topological state formed in the antimonene/Sb2Te3 heterostructure was confirmed with angle-resolved photoemission spectra and density-functional theory calculations; in particular, the Dirac point was located almost at the Fermi level. The results reveal that Dirac fermions are indeed realized at the interface of a 2D normal insulator (NI) and a 3D TI as a result of strong hybridization between antimonene and Sb2Te3. Our work demonstrates that the position of the Dirac point and the shape of the Dirac surface state can be tuned by varying the energy position of the NI valence band, which modifies the direction of the spin texture of Sb-BL/Sb2Te3 via varying the Fermi level. This topological phase in 2D-material engineering has generated a paradigm in that the topological proximity effect at the NI/TI interface has been realized, which demonstrates a way to create QSH systems in 2D-material TI heterostructures.
ABSTRACT
The computer-aided design/computer-aided manufacturing (CAD/CAM) fabrication technique has become one of the hottest topics in the dental field. This technology can be applied to fixed partial dentures, removable dentures, and implant prostheses. This study aimed to evaluate the feasibility of NaCaPO4-blended zirconia as a new CAD/CAM material. Eleven different proportional samples of zirconia and NaCaPO4 (xZyN) were prepared and characterized by X-ray diffractometry (XRD) and Vickers microhardness, and the milling property of these new samples was tested via a digital optical microscope. After calcination at 950 °C for 4 h, XRD results showed that the intensity of tetragonal ZrO2 gradually decreased with an increase in the content of NaCaPO4. Furthermore, with the increase in NaCaPO4 content, the sintering became more obvious, which improved the densification of the sintered body and reduced its porosity. Specimens went through milling by a computer numerical control (CNC) machine, and the marginal integrity revealed that being sintered at 1350 °C was better than being sintered at 950 °C. Moreover, 7Z3N showed better marginal fit than that of 6Z4N among thirty-six samples when sintered at 1350 °C (p < 0.05). The milling test results revealed that 7Z3N could be a new CAD/CAM material for dental restoration use in the future.
ABSTRACT
For efficient solar energy harvesting, various engineering strategies to strengthen visible-light responsivity of ZnO photocatalyst is under intensive investigation. In this work, a new ternary C-ZnO/MoS2/mesoporous carbon nanocomposite was successfully prepared by a two-step solution-processed synthesis protocol. The ternary composite exhibits a well-interconnected 3D mesoporous microstructure assembled by carbon nanosheets, which is loaded with quasi 0D ZnO nanoparticles and 2D MoS2 nanosheets. The carbonaceous nanocomposites show enhanced visible-light-driven photocatalytic performance and high photo-corrosion resistance. The incorporation of carbon in the hybrid design has manifold benefits that drastically promotes the photoactivity and photostability. The significant enhancement in photodegradation activity of the hybrid catalysts can be ascribed to a few positive synergistic effects, such as increased surface area and active reaction sites, boosted surface charge utilization efficiency, and band-gap lowering. The high porosity of the distinct microstructure raises the dye adsorption within the material. Tailored interface/surface properties enable more effective mass transport and higher separation efficiency of photo-generated carriers. The modulated electronic structure leads to the narrowing of the ZnO optical bandgap. Meanwhile, coupling with carbon prevents ZnO from photo-corrosion. Our approach highlights the roles of carbon as structure directing and stabilizing agents as well as heteroatom in defect engineering for wide band-gap oxide materials. The rational material design of multivariate mixed-dimensional architecture also provides guiding insight for the advancement of heterogeneous photocatalyst materials with superior performance and durability. The presented engineering strategy would be a promising method for the preparation of nanomaterials supported on 3D carbon network with high porosity and visible-light-driven photocatalytic performance.
Subject(s)
Nanocomposites , Zinc Oxide , Carbon , Light , MolybdenumABSTRACT
We report the facile and economic preparation of two-dimensional (2D) and 0D MoSe2 nanostructures based on systematic and non-toxic top-down strategies. We demonstrate the intrinsic peroxidase-like activity of these MoSe2 nanostructures. The catalytic processes begin with facilitated decomposition of H2O2 by using MoSe2 nanostructures as peroxidase mimetics. In turn, a large amount of generated radicals oxidizes 3,3,5,5-tetramethylbenzidine (TMB) to produce a visible color reaction. The enzymatic kinetics of our MoSe2 nanostructures complies with typical Michaelis-Menten theory. Catalytic kinetics study reveals a ping-pong mechanism. Moreover, the primary radical responsible for the oxidation of TMB was identified to be È®2- by active species-trapping experiments. Based on the peroxidase mimicking property, we developed a new colorimetric method for H2O2 detection by using 2D and 0D MoSe2 nanostructures. It is shown that the colorimetric sensing capability of our MoSe2 catalysts is comparable to other 2D materials-based colorimetric platforms. For instance, the linear range of H2O2 detection is between 10 and 250 µM by using 2D functionalized MoSe2 nanosheets as an artificial enzyme. Our work develops a systematic approach to use 2D materials to construct novel enzyme-free mimetic for a visual assay of H2O2, which has promising prospects in medical diagnosis and food security monitoring.
ABSTRACT
We study the quantum oscillations in the BiSbTe3 topological insulator. In addition to the Shubnikov-de Haas (SdH) oscillation, the Aharonov-Bohm-like (ABL) oscillations are also observed. The ABL oscillation period is constant at each Landau level (LL) which is determined from the SdH oscillation. The shorter ABL oscillation periods are observed at lower LLs. The oscillation period is proportional to the square root of the LL at temperatures. The ratio of the ABL oscillation period to the effective mass is weak LL dependence. The LL-dependent ABL oscillation might originate from the LL-dependent effective mass.
ABSTRACT
Photoluminescent zero-dimensional (0D) quantum dots (QDs) derived from transition metal dichalcogenides, particularly molybdenum disulfide, are presently in the spotlight for their advantageous characteristics for optoelectronics, imaging, and sensors. Nevertheless, up to now, little work has been done to synthesize and explore photoluminescent 0D WS2 QDs, especially by a bottom-up strategy without using usual toxic organic solvents. In this work, we report a facile bottom-up strategy to synthesize high-quality water-soluble tungsten disulfide (WS2) QDs through hydrothermal reaction by using sodium tungstate dihydrate and L-cysteine as W and S sources. Besides, hybrid carbon quantum dots/WS2 QDs were further prepared based on this method. Physicochemical and structural analysis of QD hybrid indicated that the graphitic carbon quantum dots with diameters about 5 nm were held onto WS2 QDs via electrostatic attraction forces. The resultant QDs show good water solubility and stable photoluminescence (PL). The excitation-dependent PL can be attributed to the polydispersity of the synthesized QDs. We found that the PL was stable under continuous irradiation of UV light but can be quenched in the presence of hydrogen peroxide (H2O2). The obtained WS2-based QDs were thus adopted as an electrodeless luminescent probe for H2O2 and for enzymatic sensing of glucose. The hybrid QDs were shown to have a more sensitive LOD in the case of glucose sensing. The Raman study implied that H2O2 causes the partial oxidation of QDs, which may lead to oxidation-induced quenching. Overall, the presented strategy provides a general guideline for facile and low-cost synthesis of other water-soluble layered material QDs and relevant hybrids in large quantity. These WS2-based high-quality water-soluble QDs should be promising for a wide range of applications in optoelectronics, environmental monitoring, medical imaging, and photocatalysis.
ABSTRACT
In this work, a high thermoelectric figure of merit, zT of 1.9 at 740 K is achieved in Ge1-xBixTe crystals through the concurrent of Seebeck coefficient enhancement and thermal conductivity reduction with Bi dopants. The substitution of Bi for Ge not only compensates the superfluous hole carriers in pristine GeTe but also shifts the Fermi level (EF) to an eligible region. Experimentally, with moderate 6-10% Bi dopants, the carrier concentration is drastically decreased from 8.7 × 1020 cm-3 to 3-5 × 1020 cm-3 and the Seebeck coefficient is boosted three times to 75 µVK-1. In the meantime, based on the density functional theory (DFT) calculation, the Fermi level EF starts to intersect with the pudding mold band at L point, where the band effective mass is enhanced. The enhanced Seebeck coefficient effectively compensates the decrease of electrical conductivity and thus successfully maintain the power factor as large as or even superior than that of the pristine GeTe. In addition, the Bi doping significantly reduces both thermal conductivities of carriers and lattices to an extremely low limit of 1.57 W m-1K-1 at 740 K with 10% Bi dopants, which is an about 63% reduction as compared with that of pristine GeTe. The elevated figure of merit observed in Ge1-xBixTe specimens is therefore realized by synergistically optimizing the power factor and downgrading the thermal conductivity of alloying effect and lattice anharmonicity caused by Bi doping.
ABSTRACT
The aim of this study is to determine the minimum required thickness of a monolithic zirconia crown in the mandibular posterior area for patients with bruxism. Forty-nine full zirconia crowns, with seven different occlusal thicknesses of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1.0 mm, were made by using a computer-aided design/computer-aided manufacturing system (CAD/CAM). Seven crowns in each group were subjected to cyclic loading at 800 N and 5 Hz in a servohydraulic testing machine until fracture or completion of 100,000 cycles. Seven finite element models comprising seven different occlusal thicknesses of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1.0 mm were simulated using three different loads of vertical 800 N, oblique 10 degrees 800 N, and vertical 800 N + x N torque (x = 10, 50, and 100). The results of cyclic loading tests showed that the fracture resistance of the crown was positively associated with thickness. Specimen breakage differed significantly according to the different thicknesses of the prostheses (p < 0.01). Lowest von Mises stress values were determined for prostheses with a minimal thickness of 1.0 mm in different loading directions and with different forces. Zirconia specimens of 1.0 mm thickness had the lowest stress values and high fracture resistance and under 800 N of loading.
ABSTRACT
The photocurrent was performed in topological insulator nanosheets with different conductances. The higher photocurrent is observed in the nanosheet with higher conductance. The responsivity is proportional to the nanosheet conductance over two orders. The responsivity is independent of the light power intensity in vacuum, but responsivity drastically decreases at low power intensity in air. The ratio of the responsivity in air to that in vacuum is negatively proportional to the the inverse of the light power intensity. These behaviors are understood as the statistical photocurrent in a system with blocked molecules. The time constant decreases as the thickness increases. A longer time constant is observed in lower atmosphere pressure.
ABSTRACT
The functionalities of porous materials could be significantly enhanced if the materials themselves were in single-crystal form, which, owing to structural coherence, would reduce electronic and optical scattering effects. However, growing macroporous single crystals remains a fundamental challenge, let alone manufacturing crystals large enough to be of practical use. Here we demonstrate a straightforward, inexpensive, versatile method for creating macroporous gallium nitride single crystals on a centimetre scale. The synthetic strategy is built upon a disruptive crystal growth mechanism that utilises direct nitridation of a parent LiGaO2 single crystal rendering an inward epitaxial growth process. Strikingly, the resulting single crystals exhibit electron mobility comparable to that for bulk crystals grown by the conventional sodium flux method. This approach not only affords control of both crystal and pore size through synthetic modification, but proves generic, thus opening up the possibility of designing macroporous crystals in a wealth of other materials.
ABSTRACT
M-plane GaN thin films were grown on LiAlO2 substrates under different N/Ga flux ratios by plasma-assisted molecular beam epitaxy. An anisotropic growth of M-plane GaN was demonstrated against the N/Ga flux ratio. As the N/Ga flux ratio decreased by increasing Ga flux, the GaN surface trended to a flat morphology with stripes along [11[Formula: see text]0]. According to high-resolution X-ray diffraction analysis, Li5GaO4 was observed on the interface between GaN and LiAlO2 substrate. The formation of Li5GaO4 would influence the surface morphology and crystal quality.
ABSTRACT
STATEMENT OF PROBLEM: The use of monolithic zirconia crowns in implant prostheses is increasing, especially when the interdental space is insufficient. However, fractures have been reported in clinical practice. PURPOSE: The purpose of this study was to determine the minimal thickness of a complete zirconia crown used for an implant prosthesis in the posterior dental region. MATERIAL AND METHODS: Fifty complete zirconia crowns were produced using a computer-aided design/computer-aided manufacturing technique. In each group, 5 crowns of varying thicknesses (0.4, 0.5, 0.6, 0.7, and 0.8 mm) were subjected to cycles of vertical and 10-degree oblique compressive loading at 5 Hz and 300 N in a servohydraulic testing machine. Five finite element models comprising 5 different occlusal thicknesses (0.4, 0.5, 0.6, 0.7, and 0.8 mm) were simulated at 2 loading angles (0 and 10 degrees) and 3 loading forces (300, 500, and 800 N). Data were statistically analyzed, and fracture patterns were observed with a scanning electron microscope. RESULTS: Cyclic loading tests revealed that the fracture resistance of the specimens was positively associated with prosthesis thickness (P<.01). Low von Mises stress values were obtained for prostheses with a minimal thickness of 0.7 mm under varying loading directions and forces. CONCLUSIONS: Zirconia prostheses with a minimal thickness of 0.7 mm had a high fracture resistance and the lowest stress values. Therefore, dentists and laboratory technicians should carefully choose the optimum thickness of zirconia prostheses.
Subject(s)
Computer-Aided Design , Dental Porcelain , Zirconium , Crowns , Dental Prosthesis Design , Dental Restoration Failure , Dental Stress Analysis , Materials Testing , Stress, Mechanical , Surface PropertiesABSTRACT
Dirac-like topological insulators have attracted strong interest in optoelectronic application because of their unusual and startling properties. Here we report for the first time that the pure topological insulator Bi2Te3 exhibited a naturally ultrasensitive nonlinear absorption response to photoexcitation. The Bi2Te3 sheets with lateral size up to a few micrometers showed extremely low saturation absorption intensities of only 1.1 W/cm(2) at 1.0 and 1.3 µm, respectively. Benefiting from this sensitive response, a Q-switching pulsed laser was achieved in a 1.0 µm Nd:YVO4 laser where the threshold absorbed pump power was only 31 mW. This is the lowest threshold in Q-switched solid-state bulk lasers to the best of our knowledge. A pulse duration of 97 ns was observed with an average power of 26.1 mW. A Q-switched laser at 1.3 µm was also realized with a pulse duration as short as 93 ns. Moreover, the mode locking operation was demonstrated. These results strongly exhibit that Bi2Te3 is a promising optical device for constructing broadband, miniature and integrated high-energy pulsed laser systems with low power consumption. Our work clearly points out a significantly potential avenue for the development of two-dimensional-material-based broadband ultrasensitive photodetector and other optoelectronic devices.
ABSTRACT
Crystallographically aligned GaN nanobelt arrays were synthesized through a hybrid process of Au-assisted nucleation followed by non-Au-assisted anisotropy vapor-solid growth on a (100) γ-LiAlO2 substrate. To the best of our knowledge, this is the first report on aligned GaN nanobelts.