ABSTRACT
A recent reinvestigation of the gas-phase photoelectron spectra of Group 6 metal-metal quadruple-bonded complexes with scalar-relativistic DFT calculations showed that common exchange-correlation functionals reproduce the lowest ionization potentials in a semiquantitative manner. The finding encouraged us to undertake a DFT study of metal-metal quintuple bonds in a set of bisamidinato complexes with the formula MI 2[HC(NR)2]2 (M = Cr, Mo, W; R = H, Ph, 2,6-iPr2C6H3) and idealized D 2h symmetry. Scalar-relativistic OLYP/STO-TZ2P calculations indicated significant shifts in valence orbital energies among the three metals, which translate to lower first ionization potentials, higher electron affinities, and lower HOMO-LUMO gaps for the W complexes relative to their Cr and Mo counterparts. These differences are largely attributable to substantially larger relativistic effects in the case of tungsten relative to those of its lighter congeners.
ABSTRACT
Polychlorinated naphthalenes (PCNs) were included in the banned list of the Stockholm Convention due to their potential to provoke a wide range of adverse effects on living organisms and the environment. Many reviews have been written to clarify the state of knowledge and identify the research needs of this pollutant class. However, studies have yet to analyse the scientometric complexities of PCN literature. In this study, we used bibliometric R and vosviewer programs as a scientometric tool to fill this gap by focusing on articles indexed on Web of Science and Scopus databases and those published between 1973 and 2022. A total of 707 articles were published within this period with a publication/author, author/publication, and co-authors/publication ratios of 0.45, 2.19, and 4.86, respectively. Developed countries dominated most scientometric indices (number of publications, citations, and collaboration networks) in the survey period. Lotka's inverse square rule of author productivity showed that Lotka's laws do not fit PCN literature. An annual percentage growth rate of 7.46% and a Kolmogorov-Smirnoff goodness-of-fit of 0.88 suggests that more output on PCNs is likely in years to come. More research is needed from scholars from developing countries to measure the supremacy of the developed nations and to effectively comply with the Stockholm Convention agreement.
ABSTRACT
Ground-state and time-dependent density functional theory (TDDFT) calculations with the long-range-corrected, Coulomb-attenuating CAMY-B3LYP exchange-correlation functional and large, all-electron STO-TZ2P basis sets have been used to examine the potential "inverse hypercorrole" character of meso-p-nitrophenyl-appended dicyanidocobalt(III) corrole dianions. The effect is most dramatic for 5,15-bis(p-nitrophenyl) derivatives, where it manifests itself in intense NIR absorptions. The 10-aryl groups in these complexes play a modulatory role, as evinced by experimental UV-visible spectroscopic and electrochemical data for a series of 5,15-bis(p-nitrophenyl) dicyanidocobalt(III) corroles. TDDFT (CAMY-B3LYP) calculations ascribe these features clearly to a transition from the corrole's a2u-like HOMO (retaining the D4h irrep used for metalloporphyrins) to a nitrophenyl-based LUMO. The outward nature of this transition contrasts with the usual phenyl-to-macrocycle direction of charge transfer transitions in many hyperporphyrins and hypercorroles; thus, the complexes studied are aptly described as inverse hypercorroles.
ABSTRACT
Experimental structural data for bis(terpyridine)iron(II) and a series of related iron(II) complexes, featuring either substituted terpyridine or tris-azinyl analogues of terpyridine, are presented and analyzed in terms of the Mean Absolute Deviation (MAD) from the average experimental data for each specific complex. The experimental structural data are then juxtaposed with density functional theory (DFT) calculated data obtained using various combinations of DFT functionals and basis sets, with and without the inclusion of Grimme D3 empirical dispersion correction. These diverse computational approaches yield optimized geometries that are subsequently compared against the available experimental structural data to assess their accuracy. The aim is to identify a reliable DFT method for determining the geometries of bis(terpyridine)iron(II) and its related complexes.
ABSTRACT
Phlorins have long remained underexplored relative to their fully conjugated counterparts, such as porphyrins, hydroporphyrins, and corroles. Herein, we have attempted to bridge that knowledge gap with a scalar-relativistic density functional theory (DFT) study of unsubstituted iridium and gold phlorin derivatives and a multitechnique experimental study of iridium-bispyridine and gold complexes of 5,5-dimethyl-10,15,20-tris(pentafluorophenyl)phlorin. Theory and experiments concur that the phlorin derivatives exhibit substantially smaller HOMO-LUMO gaps, as reflected in a variety of observable properties. Thus, the experimentally studied Ir and Au complexes absorb strongly in the near-infrared (NIR), with absorption maxima at 806 and 770 nm, respectively. The two complexes are also weakly phosphorescent with emission maxima at 950 and 967 nm, respectively. They were also found to photosensitize singlet oxygen formation, with quantum yields of 40 and 28%, respectively. The near-infrared (NIR) absorption and emission are consonants with smaller electrochemical HOMO-LUMO gaps of â¼1.6 V, compared to values of â¼2.1 V, for electronically innocent porphyrins and corroles. Interestingly, both the first oxidation and reduction potentials of the Ir complex are some 600 mV shifted to more negative potentials relative to those of the Au complex, indicating an exceptionally electron-rich macrocycle in the case of the Ir complex.
ABSTRACT
Through a comprehensive computational analysis utilizing Density Functional Theory (DFT), we clarify the electronic structure and spectroscopic properties of modified iron(II)-terpyridine derivatives, with the aim of enhancing the efficiency of Dye-Sensitized Solar Cells (DSSCs). We optimized a series of nineteen iron(II)-terpyridine derivatives and related compounds in acetonitrile (MeCN) as the solvent using TDDFT, evaluating their potential as dyes for DSSCs. From the conducted computations on the optimized geometries of the nineteen [Fe(Ln)2]2+ complexes, containing substituted terpyridine and related ligands L1-L19, we determined the wavelengths (λ in nm), transition energy (E in eV), oscillator strength (f), type of transitions, excited state lifetime (τ), light harvesting efficiency (LHE), frontier orbital character and their energies (ELUMO/EHOMO), natural transition orbitals (NTOs), injection driving force of a dye (ΔGinject), and regeneration driving force of a dye (ΔGregenerate). Results show that the theoretically calculated values for assessing dye efficiency in a DSSC correlate with available experimental values. The UV-visible spectra of [Fe(Ln)2]2+ exhibited a peak above 500 nm (λmax) in the visible region, attributed to the ligand-to-metal charge transfer band (LMCT) in literature, and a significant absorbance peak at approximately 300 nm (λA,max) in the UV region. The M06-D3/CEP-121G method replicated all reported λmax and λA,max values with a mean absolute deviation (MAD) of 21 and 18 nm, respectively. Our findings underscore the connections between electronic modifications and absorption spectra, emphasizing their impact on the light-harvesting capabilities and overall performance of DSSCs. This research contributes to the advancement of fundamental principles governing the design and optimization of novel photovoltaic materials, facilitating the development of more efficient and sustainable solar energy technologies.
Subject(s)
Coloring Agents , Solar Energy , Coloring Agents/chemistry , Iron , Spectrophotometry, Ultraviolet , Ferrous CompoundsABSTRACT
We have revisited the gas-phase photoelectron spectra of quadruple-bonded dimolybdenum(II,II) and ditungsten(II,II) paddlewheel complexes with modern density functional theory methods and obtained valuable calibration of four well-known exchange-correlation functionals, namely, BP86, OLYP, B3LYP*, and B3LYP. All four functionals were found to perform comparably, with discrepancies between calculated and experimental ionization potentials ranging from <0.1 to â¼0.5 eV, with the lowest errors observed for the classic pure functional BP86. All four functionals were found to reproduce differences in ionization potentials (IPs) between analogous Mo2 and W2 complexes, as well as large, experimentally observed ligand field effects on the IPs, with near-quantitative accuracy. The calculations help us interpret a number of differences between analogous Mo2 and W2 complexes through the lens of relativistic effects. Thus, relativity results in not only significantly lower IPs for the W2 complexes but also smaller HOMO-LUMO gaps and different triplet states relative to their Mo2 counterparts.
ABSTRACT
CONTEXT: It has been reported that photoexcitation of azastilbene compounds like E-1,2-bispyrazinyl-ethylene (bpe) can undergo E â Z photoisomerization of its quaternary salts via the excited triplet state. However, experimentally it is possible to get low fluorescence and photoisomerisation quantum yields in a state with higher internal conversion than intersystem crossing. We modelled bpe and its methylated derivative (bpeMe), as well as its quaternary halogen salts (bpeMeX with X = F-, Cl-, Br- and I-) to study levels of fluorescence, phosphorescence and excited state potential energy surfaces (PES). Results support experimental observations of molecules where the anion of a salt is an efficient electron donor, that molecules with weak electron-donating anions like Cl- to give increased fluorescence and photoisomerization, as compared to molecules with stronger electron-donating anions like I-, which are dominated by competing electron transfer. The fluorescence of bpeMeF and bpeMeCl was found to be stronger than bpeMeBr and bpeMeI. A deep well in the triplet excited state of bpeMeI is considered responsible for the decreased photoisomerization, compared to what was experimentally observed for bpeMeCl. Uniquely, the bpeMeI molecule is characterised by near-zero splitting of the s1 and t1 excited states that can enhance charge transfer. The quaternary salt of bpeMe with stronger electron-donating Br- anion was observed to undergo fluorescence and phosphorescence at much lower energy compared to those with weak electron-donating F- and Cl- anions. This research shows how to control the excited state fluorescence, phosphorescence and isomerization of quaternary halogen salts of methyl derivatives of 1,2-bispyrazinyl-ethylene, which aids experimental design where excited state isomerization is considered. METHODS: Geometry optimization, molecular electrostatic potential (MESP), and time dependent density functional theory (TDDFT) calculations were conducted utilizing Gaussian 16 with the B3LYP functional and the 6-31 + G(d,p) basis set. The minimum energy path (MEP) for the E to Z isomerization of the molecules was established employing the Nudged-Elastic-Band (NEB) method, implemented in Orca 4.2. Precise energies of the E â Z isomerization reaction path were determined employing CASSCF and a more accurate multireference method, NEVPT2.
ABSTRACT
Through this paper, the authors propose using the quantum cluster equilibrium (QCE) theory to reinvestigate ammonia clusters in the liquid phase. The ammonia clusters from size monomer to hexadecamer were considered to simulate the liquid ammonia in this approach. The clusterset used to model the liquid ammonia is an ensemble of different structures of ammonia clusters. After studious research of the representative configurations of ammonia clusters through the cluster research program ABCluster, the configurations have been optimized at the MN15/6-31++G(d,p) level of theory. These optimizations lead to geometries and frequencies as inputs for the Peacemaker code. The QCE study of this molecular system permits us to get the liquid phase populations in a temperature range of 190-260 K, covering the temperatures from the melting point to the boiling point. The results show that the population of liquid ammonia comprises mainly the ammonia hexadecamer followed by pentadecamer, tetradecamer, and tridecamer. We noted that the small-sized ammonia clusters do not contribute to the population of liquid ammonia. In addition, the thermodynamic properties, such as heat of vaporization, heat capacity, entropy, enthalpy, and free energies, obtained by the QCE theory have been compared to the experiment given some relatively good agreements in the gas phase and show considerable discrepancies in liquid phase except the density. Finally, based on the predicted population, we calculated the infrared spectrum of liquid ammonia at 215 K temperature. It comes out that the calculated infrared spectrum qualitatively agrees with the experiment.
ABSTRACT
CONTEXT: Micro-hydration of the aminobenzoic acid is essential to understand its interaction with surrounding water molecules. Understanding the micro-hydration of the aminobenzoic acid is also essential to study its remediation from wastewater. Therefore, we explored the potential energy surfaces (PESs) of the para-aminobenzoic acid-water clusters, ABW[Formula: see text], [Formula: see text], to study the microsolvation of the aminobenzoic acid in water. In addition, we performed a quantum theory of atoms in molecules (QTAIM) analysis to identify the nature of non-covalent bondings in the aminobenzoic acid-water clusters. Furthermore, temperature effects on the stability of the located isomers have been examined. The located structures have been used to calculate the hydration free energy and the hydration enthalpy of the aminobenzoic acid using the cluster continuum solvation model. The hydration free energy and the hydration enthalpy of the aminobenzoic acid at room temperature are evaluated to be -7.0 kcal/mol and -18.1 kcal/mol, respectively. The hydration enthalpy is in perfect agreement with a previous experimental estimate. Besides, temperature effects on the calculated hydration enthalpy and free energy are reported. Finally, we calculated the gas phase binding energies of the most stable structures of the ABW[Formula: see text] clusters using twelve functionals of density functional theory (DFT), including empirical dispersion. The DFT functionals are benchmarked against the DLPNO-CCSD(T)/CBS. We have found that the three most suitable DFT functionals are classified in the following order: PW6B95D3 > MN15 > [Formula: see text]B97XD. Therefore, the PW6B95D3 functional is recommended for further study of the aminobenzoic acid-water clusters and similar systems. METHODS: The exploration started with classical molecular dynamics simulations followed by complete optimization at the PW6B95D3/def2-TZVP level of theory. Optimizations are performed using Gaussian 16 suite of codes. QTAIM analysis is performed using the AIMAll program.
ABSTRACT
CONTEXT: Bis(terpyridine)manganese(III) exhibits Jahn-Teller distortion due to the inequivalent occupation of the degenerate eg orbitals of this high-spin d4 pseudo octahedral complex. Due to the spatially constrained nature of the terpyridine ligand, the central Mn-N bonds will always be shorter than the Mn-N terminal bonds, making it more difficult to distinguish between compression and elongation Jahn-Teller structures for bis(terpyridine)manganese(III). Density functional theory (DFT) calculations were utilized as a tool to evaluate the type of Jahn-Teller distortion in the high-spin d4 bis(terpyridine)manganese(III). The nature of the Jahn-Teller distortion calculated does depend upon the choice of density functional approximation (DFA) with the B3LYP, M06, and OLYP-D3 DFAs giving compression and the PW6B95D3, MN15, and MN15-D3 DFAs giving elongation in gas-phase calculations. All solvent-phase calculations yield an elongated structure for the bis(terpyridine)manganese(III) compound, which is yet to be structurally characterized experimentally. However, both gas and solvent OLYP-D3 calculations result in a compressed structure for the only experimentally isolated and characterized bis(terpyridine)manganese(III) complex, specifically the complex with terpyridine = 4'-(4-methylphenyl)-2,2':6',2''-terpyridine. This alignment with the experimentally observed compression Jahn-Teller structure enhances the credibility of OLYP-D3 calculations in reproducing the observed geometries. The compressed Jahn-Teller geometries were near D2d symmetry with the z-axis for compression defined along the Mn-N central bonds. Elongation Jahn-Teller distortion is not possible along the Mn-N central bonds, due to their spatially constrained nature. Thus, elongation occur along one pair of opposite Mn-N terminal bonds that are longer than the other pair of opposite terminal bonds, with shorter central bonds. The highest symmetry of the elongation Jahn-Teller distortion geometry of bis(terpyridine)manganese(III) is C2v. Criteria to distinguish between a compression and elongation Jahn-Teller geometry for bis(terpyridine)manganese(III) are identified. The nature of the singly occupied eg molecular orbital, exhibiting anti-bonding interaction with the nitrogen-p MOs involved, dictates the type of Jahn-Teller distortion that occurs. The low-energy occupied bonding t2g molecular orbitals establish bonds with and undergo mixing with the ligand molecular orbitals. The OLYP-D3 functional is recommended for calculating bis(terpyridine)manganese(III) and related compounds due to its consistent generation of metal-ligand bonds slightly longer than observed in experiments, in line with the required behavior. Additionally, OLYP-D3 offers a realistic electronic structure for Jahn-Teller distorted bis(terpyridine)manganese(III), correctly identifying alpha eg molecular orbitals as the highest occupied molecular orbital and lowest unoccupied molecular orbital in agreement with experimental electrochemical studies. Furthermore, OLYP-D3 accurately reproduces the experimental compression geometry for the only structurally known bis(terpyridine)manganese(III) compound, instilling confidence in its reliability for such calculations. METHODS: DFT geometry optimization and frequency calculations were done on the two different modes of Jahn-Teller distortion of bis(terpyridine)manganese(III), using the OLYP, B3LYP, M06, PW6B95D3, and MN15 functionals, with and without the Grimme's D3 dispersion correction, and the 6-311G(d,p) or def2TZVPP basis set, as implemented in Gaussian 16. All optimizations were in the gas phase and also in the solvent phase with CH3CN as implicit solvent using IEFPCM. DFT calculations were utilized to determine the Jahn-Teller effect on the geometry of high-spin d4 bis(terpyridine)manganese(III) complex containing two structurally constrained tridentate ligands.
ABSTRACT
CONTEXT: The solvation of metal ions is crucial to understanding relevant properties in physics, chemistry, or biology. Therefore, we present solvation enthalpies and solvation free energies of the ferrous ion in water and ammonia. Our results agree well with the experimental reports for the hydration free energy and hydration enthalpy. We obtained [Formula: see text] kJ mol[Formula: see text] for the hydration free energy and [Formula: see text] kJ mol[Formula: see text] for the hydration enthalpy of ferrous ion in water at room temperature. At ambient temperature, we obtained [Formula: see text] kJ mol[Formula: see text] as the [Formula: see text] ammoniation free energy and [Formula: see text] kJ mol[Formula: see text] for the ammoniation enthalpy. In addition, the free energy of solvation is deeply affected when the temperature increases. This pattern can be attributed to the rise of entropy when the temperature rises. Besides, the temperature does not affect the ammoniation enthalpies and the hydration enthalpy of the [Formula: see text] ion. METHOD: All the geometry optimizations are performed at the MP2 methods associated with the 6-31++g(d,p) basis set of Pople. solvated phase structures of [Formula: see text] ion in water or in ammonia are performed using the PCM model. The [Formula: see text] program suite was used to perform all the calculations. The program TEMPO was also used to evaluate the temperature sensitivity of the different obtained geometries.
ABSTRACT
The class of insecticides known as neonicotinoid insecticides has gained extensive application worldwide. Two characteristics of neonicotinoid pesticides are excellent insecticidal activity and a wide insecticidal spectrum for problematic insects. Neonicotinoid pesticides can also successfully manage pest insects that have developed resistance to other insecticide classes. Due to its powerful insecticidal properties and rapid plant absorption and translocation, dinotefuran, the most recent generation of neonicotinoid insecticides, has been widely used against biting and sucking insects. Dinotefuran has a wide range of potential applications and is often used globally. However, there is growing evidence that they negatively impact the biodiversity of organisms in agricultural settings as well as non-target organisms. The objective of this review is to present an updated summary of current understanding regarding the non-target effects of dinotefuran; we also enumerated nano- and bio-based mitigation and management strategies to reduce the impact of dinotefuran on non-target organisms and to pinpoint knowledge gaps. Finally, future study directions are suggested based on the limitations of the existing studies, with the goal of providing a scientific basis for risk assessment and the prudent use of these insecticides.
Subject(s)
Guanidines , Insecticides , Animals , Insecticides/toxicity , Ecosystem , Neonicotinoids/toxicity , Nitro Compounds/toxicity , InsectaABSTRACT
Dimethylsulfoxide (DMSO) clusters are crucial for understanding processes in liquid DMSO. Despite its importance, DMSO clusters have received negligible attention due to the complexity of their potential energy surfaces (PESs). In this work, we explored the PESs of the DMSO clusters from dimer to decamer, starting with classical molecular dynamics, followed by full optimizations at the PW6B95-D3/def2-TZVP level of theory. In addition, the binding energies, the binding enthalpy per DMSO, and the quantum theory of atoms in molecules (QTAIM) analysis of the most stable isomers are reported. Temperature effects on the stability of the isomers have also been assessed. After thoroughly exploring the PESs of the DMSO clusters, 159 configurations have been used to apply the quantum cluster equilibrium (QCE) theory to liquid DMSO. The quantum cluster equilibrium theory has been applied to determine the liquid properties of DMSO from DMSO clusters. Thus, using the QCE, the population of the liquid DMSO, its infrared spectrum, and some thermodynamic properties of the liquid DMSO are predicted. The QCE results show that the population of the liquid DMSO is mainly dominated by the DMSO dimer and decamer, with the contribution in trace of the DMSO monomer, trimer, tetramer, pentamer, and octamer. More interestingly, the predicted infrared spectrum of liquid DMSO is in qualitative agreement with the experiment.
Subject(s)
Dimethyl Sulfoxide , Molecular Dynamics Simulation , Thermodynamics , Isomerism , Quantum Theory , PolymersABSTRACT
Objective: Secondary metabolites and polyphenolic compounds from medicinal plants have been demonstrated to have multiple biological functions with promising research and development prospects. This study examined the effect of ß-stigmasterol (with ergosterol) and xylopic acid isolated from Anchomanes difformis on liver mitochondrial permeability transition pore (mPTP). Methods: The compounds were isolated by vacuum liquid chromatography. Mitochondrial swelling was assessed as changes in absorbance under succinate-energized conditions. Results: 1H and 13C NMR spectroscopic elucidation of the isolates affirmed the presence of ß-stigmasterol with ergosterol (1:0.3) and xylopic acid. The isolates reversed the increase in lipid peroxidation and inhibited the opening of mitochondrial permeability transition pores caused by calcium and glucose. Pharmacological inhibition of mPTP offers a promising therapeutic target for the treatment of mitochondrial-associated disorders. Conclusion: Reduction in the activity of calcium ATPase and the expression of Caspase-3 and -9 were observed, suggesting that they could play a role in protecting physicochemical properties of membrane bilayers from free radical-induced severe cellular damage and be useful in the management of diseases where much apoptosis occurs.
ABSTRACT
CONTEXT: The search for highly efficient adsorbent materials remains a significant requirement in the field of adsorption for wastewater treatment. Computational study can highly contribute to the identification of efficient material. In this work, we propose a computational approach to study the adsorption of four cationic basic dyes, basic blue 26 (BB26), basic green 1 (BG1), basic yellow 2 (BY2), and basic red 1 (BR1), onto two models of graphene oxide as adsorbents. The main objectives of this study are the assessment of the adsorption capacity of the graphene oxide towards basic dyes and the evaluation of the environmental and temperature effects on the adsorption capacity. Quantum theory of atoms in molecules (QTAIM) analysis has been used to understand the interactions between the dyes and graphene oxides. In addition, adsorption free energies of the dyes onto graphene oxides are calculated in gas and solvent phases for temperatures varying from 200 to 400 K. As a result, the adsorption free energy varies linearly depending on the temperature, highlighting the importance of temperature effects in the adsorption processes. Furthermore, the results indicate that the environment (through the solvation) considerably affects the calculated adsorption free energies. Overall, the results show that the two models of graphene oxide used in this work are efficient for removing dyes from wastewater. METHODS: We have optimized the complexes formed by the interaction of dyes with graphene oxides at the PW6B95-D3/def2-SVP level of theory. The SMD solvation model realizes the implicit solvation, and water is used as the solvent. Calculations are performed using the Gaussian 16 suite of program. QTAIM analysis is performed using the AIMAll program. Gibbs free energies as function of temperature are calculated using the TEMPO program.
ABSTRACT
Free-base corroles have long been known to be acidic, readily undergoing deprotonation by mild bases and in polar solvents. The conjugate base, however, has not been structurally characterized until now. Presented here is a first crystal structure of a free-base corrole anion, derived from tris(p-cyanophenyl)corrole, as the tetrabuylammonium salt. The low-temperature (100 K) structure reveals localized hydrogens on a pair of opposite pyrrole nitrogens. DFT calculations identify such a structure as the global minimum but also point to two cis tautomers only 4-7 kcal/mol above the ground state. In terms of free energy, however, the cis tautomers are above or essentially flush with the trans-to-cis barrier so the cis tautomers are unlikely to exist or be observed as true intermediates. Thus, the hydrogen bond within each dipyrrin unit on either side of the molecular pseudo-C2 axis through C10 (i.e., between pyrrole rings A and B or between C and D) qualifies as or closely approaches a low-barrier hydrogen bond. Proton migration across the pseudo-C2 axis entails much higher activation energies >20 kcal/mol, reflecting the relative rigidity of the molecule along the C1-C19 pyrrole-pyrrole linkage.
ABSTRACT
Cancer is the abnormal division and multiplication of cells in an organ or tissue. It is the second leading cause of death globally. There are various types of cancer such as prostate, breast, colon, lung, stomach, liver, skin, and many others depending on the tissue or organ where the abnormal growth originates. Despite the huge investment in the development of anticancer agents, the transition of research to medications that improve substantially the treatment of cancer is less than 10%. Cisplatin and its analogs are ubiquitous metal-based anticancer agents notable for the treatment of various cancerous cells and tumors but unfortunately accompanied by large toxicities due to low selectivity between cancerous and normal cells. The improved toxicity profile of cisplatin analogs bearing bidentate ligands has motivated the synthesis of vast metal complexes of bidentate ligands. Complexes derived from bidentate ligands such as ß-diketones, diolefins, benzimidazoles and dithiocarbamates have been reported to possess 20 to 15,600-fold better anticancer activity, when tested on cell lines, than some known antitumor drugs currently on the market, e.g. cisplatin, oxaliplatin, carboplatin, doxorubicin, and 5-fluorouracil. This work discusses the anticancer properties of various metal complexes derived from bidentate ligands, for possible application in chemotherapy. The results discussed were evaluated by the IC50 values as obtained from cell line tests on various metal-bidentate complexes. The structure-activity relationship study of the complexes discussed, revealed that hydrophobicity is a key factor that influences anticancer properties of molecules.
Subject(s)
Antineoplastic Agents , Coordination Complexes , Neoplasms , Humans , Cisplatin/pharmacology , Cisplatin/therapeutic use , Ligands , Carboplatin , Neoplasms/drug therapy , Neoplasms/pathologyABSTRACT
The tripyrrin-1,14-dione biopyrrin, which shares the scaffold of several naturally occurring heme metabolites, is a redox-active platform for metal coordination. We report the synthesis of square planar platinum(II) tripyrrindiones, in which the biopyrrin binds as a tridentate radical and the fourth coordination position is occupied by either aqua or tert-butyl isocyanide ligands. These complexes are stable through chromatographic purification and exposure to air. Electron paramagnetic resonance (EPR) data and density functional theory (DFT) analysis confirm that the spin density is located predominantly on the tripyrrindione ligand. Pancake bonding in solution between the Pt(II) tripyrrindione radicals leads to the formation of diamagnetic π dimers at low temperatures. The identity of the monodentate ligand (i.e., aqua vs. isocyanide) affects both the thermodynamic parameters of dimerization and the tripyrrindione-based redox processes in these complexes. Isolation and structural characterization of the oxidized complexes revealed stacking of the diamagnetic tripyrrindiones in the solid state as well as a metallophilic Pt(II)-Pt(II) contact in the case of the aqua complex. Overall, the properties of Pt(II) tripyrrindiones, including redox potentials and intermolecular interactions in solution and in the solid state, are modulated through easily accessible changes in the redox state of the biopyrrin ligand or the nature of the monodentate ligand.
ABSTRACT
The interaction of three free-base meso-tris(p-X-phenyl)corroles H3[TpXPC] (X = H, CH3, OCH3) with Re2(CO)10 at 235 °C in the presence of K2CO3 in o-dichlorobenzene has led to putative rhenium biscorrole sandwich compounds with the formula ReH[TpXPC]2. Density functional theory calculations and Re L3-edge extended X-ray absorption fine structure measurements suggest a seven-coordinate metal center, with the "extra" hydrogen located on one of the corrole nitrogens. The complexes can be deprotonated by a base such as 1,8-diazabicyclo[5.4.0]undec-7-ene, resulting in a substantial sharpening of the UV-vis spectra and split Soret bands, consistent with the generation of C2-symmetric anions. Both the seven-coordinate neutral and eight-coordinate anionic forms of the complexes represent a new coordination motif in the field of rhenium-porphyrinoid interactions.