Hollow aluminum microspheres with high mass extinction coefficients in the long wave infrared.

Previous electromagnetic computations of multilayered dielectric/metallic spheres identified the ideal dimensions and composition for achieving optimized mass extinction coefficients (m2/g). A hollow metallic sphere, with a thin metallic shell, is one such example of a spherical structure that can theoretically achieve high mass extinction coefficients in the long wave infrared (LWIR) region (8-12 µm). To this end, we endeavored to demonstrate a cost-effective and scalable manufacturing approach for synthesizing and experimentally validating the mass extinction coefficients of hollow metallic spheres. Specifically, we detail a novel approach for fabricating hollow aluminum spheres using radio frequency (RF) magnetron sputter deposition. Sacrificial high-density polyethylene polymer microspheres were used as substrates for the deposition of thin layers of aluminum. The core shell structures were subsequently thermally processed to form the hollow micron sized aluminum shells. The mass extinction coefficients of the hollow aluminum spheres were subsequently measured and compared to computational results. A strong agreement between experimental and theoretical predictions was observed. Finally, the LWIR mass extinction coefficients of the hollow spheres were compared to high aspect ratio brass flakes, a common pigment used for LWIR attenuation, and other materials and geometries that are used for LWIR filtering applications. This comparison of both performance and availability revealed that the fabricated hollow aluminum spheres exhibited competitive LWIR properties using a more scalable and cost-effective manufacturing approach.

Integrated tunable CMOS laser.

An integrated tunable CMOS laser for silicon photonics, operating at the C-band, and fabricated in a commercial CMOS foundry is presented. The III-V gain medium section is embedded in the silicon chip, and is hermetically sealed. The gain section is metal bonded to the silicon substrate creating low thermal resistance into the substrate and avoiding lattice mismatch problems. Optical characterization shows high performance in terms of side mode suppression ratio, relative intensity noise, and linewidth that is narrow enough for coherent communications.

Thin film solar cell design based on photonic crystal and diffractive grating structures.

In this paper we present novel light trapping designs applied to multiple junction thin film solar cells. The new designs incorporate one dimensional photonic crystals as band pass filters that reflect short light wavelengths (400 - 867 nm) and transmit longer wavelengths(867 -1800 nm) at the interface between two adjacent cells. In addition, nano structured diffractive gratings that cut into the photonic crystal layers are incorporated to redirect incoming waves and hence increase the optical path length of light within the solar cells. Two designs based on the nano structured gratings that have been realized using the scattering matrix and particle swarm optimization methods are presented. We also show preliminary fabrication results of the proposed devices.