ABSTRACT
High nitrogen compounds find wide use in the development of new propellants and explosives as well as pharmaceutical chemistry as bioisosteres, bacterial stains, and antifungal agents. A class of underexplored high-nitrogen materials includes azidoximes and their 1-hydroxytetrazole isomers. Azidoximes possess an energetic azide group and are quite sensitive to impact, spark, and friction. Therefore, these materials are generated in situ and cyclized under mild acidic conditions to their 1-hydroxytetrazole isomers. Recently, we synthesized a novel 1,2,4-triazine-derived azidoxime; however, upon subjecting this material to established cyclization conditions, no reaction was observed, even after prolonged reaction times with heating. Additional 1,2,4-triazine-derived azidoximes also displayed a similar lack of reactivities. This observation led us to probe the reactivity of these materials with both a DFT investigation and crystallographically based electrostatic potential mapping. In all, the lack of reactivity toward cyclization was found to be due to an inability of 1,2,4-triazine-based azidoximes to isomerize into the reactive (E)-conformation, requiring an activation energy of 26.4 kcal mol-1.
ABSTRACT
Determining the factors that influence and can help predict energetic material sensitivity has long been a challenge in the explosives community. Decades of literature reports identify a multitude of factors both chemical and physical that influence explosive sensitivity; however no unifying theory has been observed. Recent work by our team has demonstrated that the kinetics of "trigger linkages" (i.e., the weakest bonds in the energetic material) showed strong correlations with experimental drop hammer impact sensitivity. These correlations suggest that the simple kinetics of the first bonds to break are good indicators for the reactivity observed in simple handling sensitivity tests. Herein we report the synthesis of derivatives of the explosive pentaerythritol tetranitrate (PETN) in which one, two or three of the nitrate ester functional groups are substituted with an inert group. Experimental and computational studies show that explosive sensitivity correlates well with Q (heat of explosion), due to the change in the number of trigger linkages removed from the starting material. In addition, this correlation appears more significant than other observed chemical or physical effects imparted on the material by different inert functional groups, such as heat of formation, heat of explosion, heat capacity, oxygen balance, and the crystal structure of the material.
ABSTRACT
The synthesis and structures of nitrile complexes of V(N[tBu]Ar)3, 2 (Ar = 3,5-Me2C6H3), are described. Thermochemical and kinetic data for their formation were determined by variable temperature Fourier transform infrared (FTIR), calorimetry, and stopped-flow techniques. The extent of back-bonding from metal to coordinated nitrile indicates that electron donation from the metal to the nitrile plays a less prominent role for 2 than for the related complex Mo(N[tBu]Ar)3, 1. Kinetic studies reveal similar rate constants for nitrile binding to 2, but the activation parameters depend critically on the nature of R in RCN. Activation enthalpies range from 2.9 to 7.2 kcal·mol-1, and activation entropies from -9 to -28 cal·mol-1·K-1 in an opposing manner. Density functional theory (DFT) calculations provide a plausible explanation supporting the formation of a π-stacking interaction between a pendant arene of the metal anilide of 2 and the arene substituent on the incoming nitrile in favorable cases. Data for ligand binding to 1 do not exhibit this range of activation parameters and are clustered in a small area centered at ΔH = 5.0 kcal·mol-1 and ΔS = -26 cal·mol-1·K-1. Computational studies are in agreement with the experimental data and indicate a stronger dependence on electronic factors associated with the change in spin state upon ligand binding to 1.
ABSTRACT
The drop-weight impact test is an experiment that has been used for nearly 80 years to evaluate handling sensitivity of high explosives. Although the results of this test are known to have large statistical uncertainties, it is one of the most common tests due to its accessibility and modest material requirements. In this paper, we compile a large data set of drop-weight impact sensitivity test results (mainly performed at Los Alamos National Laboratory), along with a compendium of molecular and chemical descriptors for the explosives under test. These data consist of over 500 unique explosives, over 1000 repeat tests, and over 100 descriptors, for a total of about 1500 observations. We use random forest methods to estimate a model of explosive handling sensitivity as a function of chemical and molecular properties of the explosives under test. Our model predicts well across a wide range of explosive types, spanning a broad range of explosive performance and sensitivity. We find that properties related to explosive performance, such as heat of explosion, oxygen balance, and functional group, are highly predictive of explosive handling sensitivity. Yet, models that omit many of these properties still perform well. Our results suggest that there is not one or even several factors that explain explosive handling sensitivity, but that there are many complex, interrelated effects at play.
Subject(s)
Explosive Agents , Explosive Agents/chemistry , Hot Temperature , OxygenABSTRACT
The rate and mechanism of the elimination of N2O from trans-R3Sn-O-NâN-O-SnR3 (R = Ph (1Ph) and R = Cy (1Cy)) to form R3Sn-O-SnR3 (R = Ph (2Ph) and R = Cy (2Cy)) have been studied using both NMR and IR techniques to monitor the reactions in the temperature range of 39-79 °C in C6D6. Activation parameters for this reaction are ΔH⧧ = 15.8 ± 2.0 kcal·mol-1 and ΔS⧧ = -28.5 ± 5 cal·mol-1·K-1 for 1Ph and ΔH⧧ = 22.7 ± 2.5 kcal·mol-1 and ΔS⧧ = -12.4 ± 6 cal·mol-1·K-1 for 1Cy. Addition of O2, CO2, N2O, or PPh3 to sealed tube NMR experiments did not alter in a detectable way the rate or product distribution of the reactions. Computational DFT studies of elimination of hyponitrite from trans-Me3Sn-O-NâN-O-SnMe3 (1Me) yield a mechanism involving initial migration of the R3Sn group from O to N passing through a marginally stable intermediate product and subsequent N2O elimination. Reactions of 1Ph with protic acids HX are rapid and lead to formation of R3SnX and trans-H2N2O2. Reaction of 1Ph with the metal radical â¢Cr(CO)3C5Me5 at low concentrations results in rapid evolution of N2O. At higher â¢Cr(CO)3C5Me5 concentrations, evolution of CO2 rather than N2O is observed. Addition of 1 atm or less CO2 to benzene or toluene solutions of 2Ph and 2Cy resulted in very rapid reaction to form the corresponding carbonates R3Sn-O-C(âO)-O-SnR3 (R = Ph (3Ph) and R = Cy (3Cy)) at room temperature. Evacuation results in fast loss of bound CO2 and regeneration of 2Ph and 2Cy. Variable temperature data for formation of 3Cy yield ΔHo = -8.7 ± 0.6 kcal·mol-1, ΔSo = -17.1 ± 2.0 cal·mol-1·K-1, and ΔGo298K = -3.6 ± 1.2 kcal·mol-1. DFT studies were performed and provide additional insight into the energetics and mechanisms for the reactions.
ABSTRACT
Ball milling of sodium oxides and alkali metal halide salts under a pressure of 2 atm nitrous oxide at temperatures of 38 ± 4 °C is reported. After 2.5 h of ball milling, FTIR data for both 14N2O and 15N2O additions show conclusively that cis-Na2N2O2 is formed based on excellent agreement with data reported earlier by Jansen and Feldmann who prepared pure crystalline cis-Na2N2O2 by reaction of sodium oxide and nitrous oxide for 2 h at 360 °C in a tube furnace. Continued ball milling under nitrous oxide leads to slow buildup of NaNO3 with yields on the order of 24% achieved in 20 h. Production of nitrate only occurs during active ball milling. Studies over the first 10 h reveal a trend among potassium halide salts: KBr â KCl > KI â« KF. Ball milling of sodium oxide alone under an atmosphere of N2O gives much lower yields than ball milling in the presence of added alkali metal halide salt. Ball milling of sodium oxide and nitrous oxide in fluorocarbon oil, silicone oil, calcium fluoride, clinoptilolite, molecular sieves, and silica gel does not lead to significant yields of either cis-Na2N2O2 or NaNO3.